snx-300-samyung-navtex-reciever

CHAPTER 3. SPECIFICATION
3.1. Receiver
1 Receiving Frequency : 518KHz , 490KHz or 4209.5KHz
2 Receiving Modulation : F1B(Narrow Band Direct Printing)
3 Sensitivity : 2uV e.m.f. (50 ohms), 4% error rate or less
4 Antenna input : 50 ohms for NAVTEX Active antenna
3.2. DISPLAY SECTION
1 Type of display : 5.7-inch LCD, 320×240 dots
2 Back-light : For LCD and key board
3 Dimmer control : 10steps adjustable (Selectable from keyboard)
4 Contrast control : 10steps adjustable (Selectable from keyboard)
3.3. POWER SUPPLY
1 Input voltage : Rated Voltage DC 12/24V (10 ~36V)
2 Power consumption : 10 W (at 24 V dc input)
3.4. ACTIVE ANT(SAN-300)
1 Receiving frequency : 518kHz, 490kHz and 4209.5kHz
2 Consumption current : 8Vdc 10mA (Typ.)
3
Impedance : 50 ohms
3.5. Environment
1 Operation temperature : -15°C to +55°C
2 Storage temperature : -25°C to +75°C
3 Relative humidity : 95% at 40°C (without dew condensation)
4 Vibration : IEC 60945
SNX-300
13