snx-300-samyung-navtex-reciever

Chapter 6. INSTALLATION & TROUBLSHOOTING
6.1. HOW TO INSTALL RECEIVER
You may install Navtex Receiver by using a mounting bracket, which is provided with Navtex Receiver
on the desk, shelf and ceiling and so on.
6.1.1. Installation Place
1
2
3
Place where it is over 1 meter distance from Gyro Compass.
Place where is enabling ground at a short distance.
Place where there is not allowed to expose directly by sunray and avoid from heating element
ad the place where there is of little vibration.
4
Place where main unit, antenna, PSU, earth cables etc. are as far as possible from transmitter,
radar’s cable.
5
Place where there is as far as possible from a fan and exhaust pipe and well-ventilated place.
6.1.2. Installation Sequence and Method
1
2
Dissemble the screws with the knob at both sides to install NAVTEX Receiver.
Fix firmly a mounting bracket supplied with a Receiver on the desk or wall to be installed. (Use
screw.)
3
After NAVTEX Receiver is inserted into the mounting bracket, adjust the angles and spin the
screws with the knob of right and left for better adjustment.
342
단위 : mm
< Picture 6-1 Device Installations >
SNX-300
41