Evos Mini - Documents

EVOS ◊

Plating System

EVOS MINI Plate Surgical Technique

EVOS MINI Brochure

EVOS MINI Plate Tray Layout

EVOS MINI Pocket Reference Guide

Surgical Technique

1

Surgical Technique for the

EVOS MINI Plating System

Contents

Product overview...........................................................................................4

Indications .....................................................................................................4

EVOS MINI Plating System Layout ................................................................5

Plate options .................................................................................................6

Screw options ...............................................................................................7

Plate selection ..............................................................................................8

Plate modification .........................................................................................8

Plate positioning and provisional fixation ....................................................9

Screw insertion..............................................................................................9

Size Specific Instrumentation........................................................................10

Cortex Screws ...............................................................................................12

Locking Screws .............................................................................................14

Osteopenia Screws.......................................................................................15

Closure ..........................................................................................................16

Catalog ..........................................................................................................17

Nota Bene

The technique description herein is made available to the healthcare professional to illustrate

the authors’ suggested treatment for the uncomplicated procedure. In the final analysis, the

preferred treatment is that which addresses the needs of the patient.

Prior to performing this technique, consult the Instructions for Use documentation provided with

the devices: including indications, contraindications, warnings, precautions and instructions.

3

Product overview

The EVOS MINI Plating System consists of stainless steel, variable-angle locking, low

profile plates paired with screw options for both small and long bone applications.

Plate design

The EVOS MINI Plating System provides unique plate geometries for both small and

long bone anatomy. Plates in varying lengths and geometries address a multitude of

trauma applications.

• Tine plates are designed specifically to engage bone fragments for

fragment manipulation.

• Strength Plates provide a thicker and more stable option compared to the Flex and

Tine Plates.

• Flex Plates can be contoured in three planes to address variable anatomy.

Low profile

The plates are designed to ensure low profile fixation in areas of minimal soft-tissue

coverage. Additionally, the screws in the system feature a flat head to sit flush when

used independently or through a plate.

Variable-Angle technology

Each screw hole contains five separate tabs that engage the threads of the locking

screw head to form a fixed-angle construct. This feature allows locking screws to be

angled up to 15° off axis.

Osteopenia Screws

Osteopenia Screws are designed with an optimized thread form for use in areas of

poor bone quality.

Intuitive instrumentation

Standardized connections and color-coded instrumentation offer a seamless

transition between the EVOS MINI Plating System and other implant systems.

Indications

The Smith & Nephew EVOS MINI Plating System is indicated for adolescent

(12 – 18 years) and transitional adolescent (18 – 21 years) subpopulations and

adults, as well as patients with osteopenic bone. The Smith & Nephew EVOS

MINI Plating System is indicated for fracture fixation, arthrodesis, reconstruction,

replantation or reduction of small bones and small bone fragments. This system is

also indicated for non-load bearing stabilization and reduction of bone fragments in

long bones.

4

EVOS MINI Plating System

2.0mm

2.4mm

2.7mm

General Instrument Tray

Plate Tray

2.0mm Module 2.4mm Module 2.7mm Module

5

Plate options

2.0mm plates

Geometry Size options Thickness Shaft width

Hole

spacing

Longest plate

length

T-Plate 2

Hole Head

T-Plate 3

Hole Head

6H, 8H 1.2mm Shaft: 5.0mm, Head: 10.2mm 5mm 46mm


Flex Plate 4H, 6H, 8H, 10H, 20H 1.2mm 5.0mm 5mm 101mm

Straight

Tine Plate

Strength

Plate

5H, 7H 1.2mm 5.0mm 5mm 38mm

4H, 6H, 8H, 10H, 20H 1.3mm 5.0mm 5mm 101mm

2.4mm plates


Hole

spacing

Longest plate

length

T-Plate 2

Hole Head

T-Plate 3

Hole Head




Straight

Tine Plate

Strength

Plate

5H, 7H 1.4mm 6.0mm 6mm 46mm

4H, 6H, 8H, 10H, 20H 1.9mm 6.0mm 6mm 121mm

Y-Plate 5H, 7H 1.4mm Shaft: 6.0mm, Head: 18.3mm 6mm 60mm

Y-Tine Plate 5H, 7H 1.4mm Shaft: 6.0mm, Head: 12.9mm 6mm 57mm

Triangle

Plate


Trapezoid

Plate

5H

1.4mm

Top: 17.8mm, Bottom: 24.0mm,

Height: 17.8mm

NA

NA

2.7mm plates


Hole

spacing

Longest plate

length

T-Plate 3

Hole Head



Straight

Tine Plate

Strength

Plate

5H, 7H 1.4mm 7.5mm 7mm 52mm

4H, 6H, 8H, 10H, 20H 2.2mm 7.5mm 7mm 140mm

Y-Plate

5H, 7H

1.4mm

Shaft: 7.5mm, Head: 21.5mm

7mm

71mm

Y-Tine

Plate

5H, 7H

1.4mm


7mm

68mm

Triangle

Plate

6H, 8H

1.4mm


7mm

68mm

6

Screw options

2.0mm

Description

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch

Driver

Screw lengths

Thread

length

Cortex

Screw

2.0mm 3.0mm 1.3mm 0.6mm T6

6 – 24mm (1mm increments) 26

– 40mm (2mm increments)

–

Locking

Screw

2.0mm 3.3mm 1.3mm 0.6mm T6



–

2.4mm

Description

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch

Driver

Screw lengths

Thread

length

Cortex

Screw

2.4mm 3.8mm 1.6mm 1.0mm T7


– 50mm (2mm increments) 55 –

80mm (5mm increments)

–

Locking

Screw

2.4mm 3.8mm 1.6mm 1.0mm T7




–

3.0mm

Description

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch

Driver

Screw lengths

Thread

length

Osteopenia

Screw

3.0mm 3.8mm 1.6mm 1.5mm T7



–

2.7mm

Description

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch

Driver

Screw lengths

Thread

length

Cortex

Screw

2.7mm 4.5mm 2.0mm 1.0mm T8




–

Locking

Screw

2.7mm 4.3mm 2.0mm 1.0mm T8




–

4.0mm

Description

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch

Driver

Screw lengths

Thread

length

Fully Threaded

Osteopenia Screw

4.0mm 4.5mm 2.0mm 1.75mm T8

10 – 50mm (2mm Increments) 55

– 80mm (5mm Increments)

–

Partially Threaded

Osteopenia Screw

4.0mm 4.5mm 2.0mm 1.75mm T8

26 – 50mm (2mm Increments)

55 – 80mm (5mm Increments)

40% of

screw

length

7

Plate selection

Select the appropriate plate size, geometry and

length. The implant modules have been

color-coded by size.

2.0mm 2.4mm 2.7mm

Note: When an EVOS MINI plate is used on

a long bone for non-load bearing stabilization

and reduction, it is recommended that the plate

be used only in conjunction with separate,

definitive fixation.

Note: When an EVOS MINI plate is used for

non-load bearing stabilization and reduction of

bone fragments in long bones, it is the surgeon’s

discretion to leave the plate in-situ or remove it

once its service as an aid to healing

is accomplished.

Plate modification

Occasionally, minor plate contouring will be

required. This may be accomplished using

the Plate Bending Pliers and Bending Irons.

Additionally, mini-fragment plates can be cut to

length using the Plate Cutting Forceps.

2.4 and 2.7mm Strength Plates

All 2.4 and 2.7mm Plates

(except Strength Plates)

All 2.0mm Plates

Note: The Plate Cutting Forceps should not be

used to cut the 2.4mm and 2.7mm Strength Plates.

Note: Avoid excessive bending through locking

holes. To protect the locking holes while

contouring, utilize the Plate Bending Pliers or the

long slot located on the end of the pliers. If the

plate is contoured through the locking holes, a

non-locking screw is recommended.

If the plate is bent through the locking hole,utilize

the Double Ended Drill Guide for drilling as the

Variable Angle Drill Guide may not engage the

tabs in the locking hole.

8

Plate positioning and provisional fixation

Optional

Position the plate to the desired location and

provisionally fix the plate to the bone using

the provisional fixation pins. Use caution not to

insert the provisional fixation pins past the far

cortex. There are three diameters of provisional

fixation pins. Each pin diameter is specific to

plate sizes.

Plate size

2.0mm

2.4m

m

2.7m

m

PF Pins size

1.5mm x 20mm

1.8mm x 30mm

2.0mm x

30mm

Screw insertion

The choice of screws and the order and

configuration is a decision to be made by the

individual surgeon depending on the patient’s

circumstances and needs. Smith & Nephew does

not recommend any particular screw insertion

order or configuration of the various types of

screws available in the system.

9

Size Specific Instrumentation

2.0mm Screws

Description

Plate size

Variable Angle/Fixed

Angle Drill Guide

Double Ended Drill Guide

Drill Bit

Cortex Screw 2.0mm 1.5mm 1.5mm x 2.0mm 1.5mm

Locking Screw 2.0mm 1.5mm NA 1.5mm

2.4mm Screws

Description

Plate size


Angle Drill Guide


Drill Bit



3.0mm Screws

Description

Plate size


Angle Drill Guide


Drill Bit

Osteopenia Screws 2.4mm 1.8mm NA 1.8mm

2.7mm Screws

Description

Plate size


Angle Drill Guide


Drill Bit



4.0mm Screws

Description

Plate size


Angle Drill Guide


Drill Bit

Osteopenia Screws 2.7mm 2.0mm NA 2.0mm

10


2.0mm Screws

Description Over Drill Bit Countersink Depth Gauge Tap

Cortex Screw 2.0mm 2.0mm 2.0mm 2.0mm T6

Locking Screw NA 2.0mm 2.0mm 2.0mm T6

2.4mm Screws


Cortex Screw 2.4mm 2.4mm 2.4mm / 2.7mm 2.4mm T7

Locking Screw NA 2.4mm 2.4mm / 2.7mm 2.4mm T7

3.0mm Screws

Self

Retaining

Screwdriver

Self

Retaining

Screwdriver


Self

Retaining

Screwdriver

Osteopenia Screws NA 2.4mm 2.4mm / 2.7mm 3.0mm T7

2.7mm Screws


Cortex Screw 2.7mm 2.7mm 2.4mm / 2.7mm 2.7mm T8

Locking Screw NA 2.7mm 2.4mm / 2.7mm 2.7mm T8

4.0mm Screws


Osteopenia Screws NA 2.7mm 2.4mm / 2.7mm 4.0mm T8

Self

Retaining

Screwdriver

Self

Retaining

Screwdriver

11

Cortex Screws

Cortex Screws in the EVOS MINI Plating System

can be used both independently and through

the plate.

Drilling

• Option 1: Through a plate: Each Size Specific

Instrument Set is equipped with a corresponding

Variable Angle/Fixed Angle Drill Guide. Use the

conical shaped side for off-axis screw placement

through the plate and the tubular shaped side for

placing a screw perpendicular to the plate axis.

Engage the appropriate side of the Drill Guide with

the star-shaped hole on the plate and drill to the

desired depth.

• Option 2: Independent of a plate: To aid in

drilling independent of the plate, each Size

Specific Instrument set is equipped with a

corresponding Double Ended Drill Guide that is

color coded. Position the end of the Drill Guide

with one dot to the bone and drill to the desired

depth using the drill with one color band.

• Option 3: Lag screw technique: Using the

Double Ended Drill Guide, position the end of the

guide with two dots to bone and drill through the

near cortex using the Overdrill. The Overdrill can

be identified as the drill with two color bands.

Next, insert the end of the guide with one dot into

the pre-drilled hole to ensure the correct trajectory

and drill to the desired depth using the drill with

one color band. This may be performed through a

plate if desired. The Depth Gauge should be used

for accurate screw length measurement when

performing the lag screw technique.

Countersinking (optional)

If the screw is being used independently,

countersinking the screw head may be desired to

lower the screw head prominence on the bone. To

countersink, attach the size specific Countersink

to the Small Bulb Handle with AO Quick Connect

and prepare the bone surface by inserting

the tip into the predrilled hole and turning the

Countersink clockwise.

Measure

Measure for screw length using the appropriate

Depth Gauge.

Note: All drill bits are calibrated to measure depth

off the back of Drill Guides. However, a Depth

Gauge must be used after drilling through all

conical shaped guides.

12

Tap (optional)

All Cortex Screws in the system are self tapping.

However, in areas of increased bone density,

tapping the bone may be desired to facilitate

insertion. To tap the bone, attach the size

specific Tap to the Small Bulb Handle with AO

Quick Connect and turn clockwise until the

desired depth is attained.

Screw insertion

Insert the screw using the appropriate sized

Fixed Handle Driver or Screw Driver Shaft.

Cortex Screws may be inserted using power,

however, final tightening should be performed

by hand.

13

Locking Screws

The EVOS MINI Plating System features

Locking Screws to provide additional stability.

The unique locking mechanism enables a

low profile construct and the ability to place

screws up to 15º off-axis.

Drilling through a plate

Each Size Specific Instrument Set is equipped

with a corresponding Variable Angle/Fixed

Angle Drill Guide. The conical shaped side

is for off-axis screw placement through the

plate, while the tubular shaped side is used

for placing a screw perpendicular to the plate

axis. Engage the appropriate side of the drill

guide with the star-shaped hole on the plate

and drill to the desired depth.

Measure

Measure for screw length using the

appropriate Depth Gauge.

Note: All drill bits are calibrated to measure

depth off the back of drill guides. However,

a Depth Gauge must be used after drilling

through all conical shaped guides.

Tap (optional)

In areas of increased bone density, tapping

the bone may be desired to facilitate insertion.

To tap the bone, attach the size specific Tap

to the Small Bulb Handle with the AO Quick

Connect and turn clockwise until the desired

depth is attained.

Screw insertion

Insert the screw using either the size specific

Fixed Handle Driver or Screw Driver Shaft.

Locking Screws may be inserted using

power, however, final tightening should be

performed by hand. Care should be taken not

to overtighten the screw and disrupt the screw

head and plate interface.

Note: A Locking Screw can be inserted into

the plate up to three times before the locking

tabs are compromised.

Note: Failure to use drill guide could result in

failure of the Locking Screw engaging

the plate.

14

Osteopenia Screws

Osteopenia Screws are designed with an

optimized thread form for use in areas of poor

bone quality.

Drilling

• Option 1: Through a plate: Each Size Specific

Instrument Set is equipped with a corresponding

Variable Angle/Fixed Angle drill guide. Use

the conical shaped side for off-axis screw

placement through the plate and the tubular

shaped side for placing a screw perpendicular

to the plate axis. Engage the appropriate side of

the drill guide with the star-shaped hole on the

plate and drill to the desired depth.

• Option 2: Independent of a plate: To aid in

drilling independent of the plate, each Size

Specific Instrument Set is equipped with a

corresponding Double Ended Drill Guide that is

color coded. Position the end of the Drill Guide

with one dot to the bone and drill to the desired

depth using the drill with one color band.

Countersinking (optional)

If the screw is being used independently,

countersinking the screw head may be desired

to lower the screw head prominence on the

bone. To countersink, attach the size specific

Countersink to the Small Bulb Handle with AO

Quick Connect and prepare the bone surface

by inserting the tip into the predrilled hole and

turning the Countersink clockwise.

Measure

Measure screw length using the

appropriate Depth Gauge.

Note: All drill bits are calibrated to measure

depth off the back of drill guides. However,

a Depth Gauge must be used after drilling

through all conical shaped guides.

15

Tap (optional)

In areas of increased bone density, tapping is

recommended to facilitate insertion. To tap the

bone, attach the size specific Tap to the Small

Bulb Handle with the AO Quick Connect and turn

clockwise until the desired depth is attained.

Screw insertion

Insert the screw using the size specific Fixed

Handle Driver or Screw Driver Shaft. Ostepenia

Screws may be inserted using power, however,

final tightening should be performed by hand.

Closure

Obtain final AP and lateral radiographic

images to confirm patient implant position

and fracture reduction. Wound closure follows

standard technique.

16

Catalog

EVOS MINI General Instrument Set

Set No 7141-0200

Cat No Description Qt Cat No Description Qty

y

7117-4973 General Instrument Tray 1 7117-4976 Instrument and Implant Set Case 1

7117-4974 Plate Tray 1 7117-4977 Instrument and Implant Set Case Lid 1

7117-4975 Plate Tray Lid 1

Cat No Description Qt Cat No Description Qt

y

y

7117-0043 Sharp Hook 1 7117-3528 Cannulated AO to Trinkle Adapter 1

7117-0047 Plate Cutting Forceps 1 7117-3543 Tear Drop Screwdriver Handle 1

7117-0055 Hohmann Retractor, 6mm 2 7117-4928 2.4/2.7mm Depth Gauge, Long 1

7117-0095 Hohmann Retractor, 15mm 2 7117-4941 Bending Irons 2

7117-0097 Periosteal Elevator 1 7117-4960 Plate Bending Pliers 1

7117-3369 Hohmann Retractor, Bent 2 7117-0045 Screw Forceps 1

7117-3377 Reduction Forceps wit Points, Broad 2 7117-0015 Quick Coupling Handle 1

7117-3378 Reduction Forceps, Serrated Jaw 2

17

Size Specific Instruments

Set No 7141-0203

Disposables

Set No 7141-0202

2.0mm

Cat No Description Qty Cat No Description Qty

7117-4978 2.0mm Screw and Instrument Caddy 1 7110-1413 1.1mm Drill Tip K-wire, 150mm 6

7117-4979 2.0mm Screw and Instrument Caddy Lid 1 7110-1501 2.0mm Drill Tip K-wire, 150mm 6

7117-4920 T6 Fixed Handle Driver 1 7110-1502 1.6mm Drill Tip K-wire, 150mm 6

7117-4921 T6 Driver Shaft w/AO QC 2 7110-1503 1.25mm Drill Tip K-wire, 150mm 6

7117-4922 2.0mm Depth Gauge 1 7117-4901 1.5mm Drill w/AO QC 2

7117-4923 2.0mm Countersink w/AO QC 1 7117-4902 2.0mm Over Drill w/AO QC 1

7117-4924 1.5/2.0mm Drill Guide 1 7117-4904 1.5mm Provisional Fixation Pin 2

7117-4925 1.5mm Variable Angle Drill Guide 1 7117-4905 1.8mm Short Drill w/AO QC 2

7117-4906 1.8mm Long Drill w/AO QC 2

7117-4907 2.4mm Over Drill w/AO QC 1

2.4mm

7117-4909 1.8mm Provisional Fixation Pin 2

Cat No Description Qty

7117-4910 2.0mm Short Drill w/AO QC 2

7117-4980 2.4mm Screw and Instrument Caddy 1


7117-4981 2.4mm Screw and Instrument Caddy Lid 1


7117-4926 T7 Fixed Handle Driver 1


7117-4927 T7 Driver Shaft w/AO QC 2

7117-4915 2.0mm Tap w/AO QC 1

7117-4959 2.4/2.7mm Depth Gauge, Short 1

7117-4916 2.4mm Tap w/AO QC 1

7117-4969 2.4mm Countersink w/AO QC 1

7117-3366 2.7mm Tap w/AO QC 1

7117-4930 1.8/2.4mm Drill Guide 1

7117-3386 4.0mm Tap w/AO QC 1

7117-4931 1.8mm Variable Angle Drill Guide 1

7117-4918 3.0mm Tap w/AO QC 1

2.7mm

Optional Disposables

Cat No Description Qty Cat No Description Qty

7117-4982 2.7mm Screw and Instrument Caddy 1 7116-1012 1.25mm Trocar Tip K-wire, 150mm 0

7117-4983 2.7mm Screw and Instrument Caddy Lid 1 7116-1016 1.6mm Trocar Tip K-wire, 150mm 0

7117-4932 T8 Fixed Handle Driver 1 7116-1020 2.0mm Trocar Tip K-wire, 150mm 0




7117-4934 2.0/2.7mm Drill Guide 1


18

Plate Sets

Set No 7141-0201N

2.0mm T-Plate

2.0mm Strength Plate

Cat No Description Length Qty Cat No Description Length Qty

7244-2050N 2 Hole Head,

6H

7244-2052N 2 Hole Head,

8H

7244-2054N 3 Hole Head,

5H

36mm 1 7244-2068N 4H 21mm 1

46mm 1 7244-2070N 6H 31mm 1

31mm 1 7244-2072N 8H 41mm 1

7244-2056N 3 Hole Head, 51mm 1 7244-2074N 10H 51mm 1

9H

Cat No Description Length Qty

2.0mm 7244-2076N Straight Tine 20HPlate

101mm 1

7244-2058N 4H 21mm 1

2.0mm Flex Plate


7244-2060N 6H 31mm 1

7244-2078N 5H 28mm 1

7244-2062N 8H 41mm 1

7244-2080N 7H 38mm 1

7244-2064N 10H 51mm 1

7244-2066N 20H 101mm 1

2.4mm T-

2.4mm Y-

Plate

Plate

Cat No Description Length Qty Cat No Description Length Qty

7244-2450N 2 Hole Head, 6H 43mm 1 7244-2482N 5H 47mm 1

7244-2452N 2 Hole Head, 8H 55mm 1 7244-2484N 7H 59mm 1

7244-2454N 3 Hole Head, 5H 37mm 1

7244-2456N 3 Hole Head, 9H

2.4mm Y-Tine Plate

61mm 1


2.4mm Flex

7244-2486N 5H 45mm 1

Plate

Cat

Length Qty 7244-2488N 7H 57mm 1

No

7244-2460N 6H 37mm 1

2.4mm Triangle Plate

7244-2462N Description 8H 49mm 1


7244-2464N

7244-

10H

25mm

61mm 1

2458N

7244-2490N 6H 55mm 1

7244-2466N 20H 121mm 1

7244-2492N 8H 67mm 1

4H



7244-2468N 4H 25mm 1

7244-2470N 6H 37mm 1

7244-2472N 8H 49mm 1

7244-2474N 10H 61mm 1

7244-2476N 20H 121mm 1

2.4mm Trapezoid Plate


7244-2494N Trapezoid Plate 24mm x 18mm 1

2.4mm Straight Tine Plate


7244-2478N 5H 34mm 1

7244-2480N 7H 46mm 1

Note: To order the sterile version of the part, remove the “N” from the Catalog number.

To order the template version of the plate order “7244-XXXX”. Templates are not for implantation.

19

2.7mm T-Plate


7244-2720N 3 Hole Head, 5H 42mm 1

7244-2722N 3 Hole Head, 9H 71mm 1



7244-2774N 5H 38mm 1

7244-2776N 7H 52mm 1

2.7mm Flex Plate


7244-2724N 4H 28mm 1

7244-2726N 6H 42mm 1

7244-2728N 8H 56mm 1

7244-2760N 10H 70mm 1

7244-2762N 20H 140mm 1

7244-2782N 5H 52mm 1

2.7mm Strength Plate 7244-2784N 7H 66mm 1


7244-2764N 4H 28mm 1 2.7mm

Triangle

7244-2766N 6H 42mm 1 Cat No Description Length Qty

7244-2768N 8H 56mm 1 7244-2786N 6H 54mm 1

7244-2770N 10H 70mm 1 7244-2788N 8H 68mm 1

7244-2772N 20H 140mm 1

2.7mm Y-Plate


7244-2778N 5H 55mm 1

7244-2780N 7H 69mm 1

2.7mm Y-Tine Plate


Plate


To order the template version of the plate order “7244-XXXX”. Templates are not for implantation.

20

Screw Sets

Set No 7141-0204N

2.0mm Cortex Screw

Cat No Length Qty Cat No Length Qty Cat No Length Qty

7240-2006N 6mm 4 7240-2015N 15mm 4 7240-2024N 24mm 3

7240-2007N 7mm 4 7240-2016N 16mm 4 7240-2026N 26mm 3

7240-2008N 8mm 4 7240-2017N 17mm 4 7240-2028N 28mm 3

7240-2009N 9mm 4 7240-2018N 18mm 4 7240-2030N 30mm 3

7240-2010N 10mm 4 7240-2019N 19mm 4 7240-2032N 32mm 3

7240-2011N 11mm 4 7240-2020N 20mm 4 7240-2034N 34mm 3

7240-2012N 12mm 4 7240-2021N 21mm 3 7240-2036N 36mm 3

7240-2013N 13mm 4 7240-2022N 22mm 3 7240-2038N 38mm 3

7240-2014N 14mm 4 7240-2023N 23mm 3 7240-2040N 40mm 3

2.0mm Locking Screw


7241-2006N 6mm 4 7241-2015N 15mm 4 7241-2024N 24mm 3

7241-2007N 7mm 4 7241-2016N 16mm 4 7241-2026N 26mm 3

7241-2008N 8mm 4 7241-2017N 17mm 4 7241-2028N 28mm 3

7241-2009N 9mm 4 7241-2018N 18mm 4 7241-2030N 30mm 3

7241-2010N 10mm 4 7241-2019N 19mm 4 7241-2032N 32mm 3

7241-2011N 11mm 4 7241-2020N 20mm 4 7241-2034N 34mm 3

7241-2012N 12mm 4 7241-2021N 21mm 3 7241-2036N 36mm 3

7241-2013N 13mm 4 7241-2022N 22mm 3 7241-2038N 38mm 3

7241-2014N 14mm 4 7241-2023N 23mm 3 7241-2040N 40mm 3


21

2.4mm Cortex Screw


7240-2406N 6mm 4 7240-2419N 19mm 4 7240-2440N 40mm 3

7240-2407N 7mm 4 7240-2420N 20mm 4 7240-2442N 42mm 3

7240-2408N 8mm 4 7240-2421N 21mm 3 7240-2444N 44mm 3

7240-2409N 9mm 4 7240-2422N 22mm 3 7240-2446N 46mm 3

7240-2410N 10mm 4 7240-2423N 23mm 3 7240-2448N 48mm 3

7240-2411N 11mm 4 7240-2424N 24mm 3 7240-2450N 50mm 3

7240-2412N 12mm 4 7240-2426N 26mm 3 7240-2455N 55mm 3

7240-2413N 13mm 4 7240-2428N 28mm 3 7240-2460N 60mm 3

7240-2414N 14mm 4 7240-2430N 30mm 3 7240-2465N 65mm 3

7240-2415N 15mm 4 7240-2432N 32mm 3 7240-2470N 70mm 3

7240-2416N 16mm 4 7240-2434N 34mm 3 7240-2475N 75mm 3

7240-2417N 17mm 4 7240-2436N 36mm 3 7240-2480N 80mm 3

7240-2418N 18mm 4 7240-2438N 38mm 3

2.4mm Locking Screw


7241-2406N 6mm 4 7241-2419N 19mm 4 7241-2440N 40mm 3

7241-2407N 7mm 4 7241-2420N 20mm 4 7241-2442N 42mm 3

7241-2408N 8mm 4 7241-2421N 21mm 3 7241-2444N 44mm 3

7241-2409N 9mm 4 7241-2422N 22mm 3 7241-2446N 46mm 3

7241-2410N 10mm 4 7241-2423N 23mm 3 7241-2448N 48mm 3

7241-2411N 11mm 4 7241-2424N 24mm 3 7241-2450N 50mm 3

7241-2412N 12mm 4 7241-2426N 26mm 3 7241-2455N 55mm 3

7241-2413N 13mm 4 7241-2428N 28mm 3 7241-2460N 60mm 3

7241-2414N 14mm 4 7241-2430N 30mm 3 7241-2465N 65mm 3

7241-2415N 15mm 4 7241-2432N 32mm 3 7241-2470N 70mm 3

7241-2416N 16mm 4 7241-2434N 34mm 3 7241-2475N 75mm 3

7241-2417N 17mm 4 7241-2436N 36mm 3 7241-2480N 80mm 3

7241-2418N 18mm 4 7241-2438N 38mm 3


22

2.7mm Cortex Screw


7240-2706N 6mm 4 7240-2719N 19mm 4 7240-2740N 40mm 3

7240-2707N 7mm 4 7240-2720N 20mm 4 7240-2742N 42mm 3

7240-2708N 8mm 4 7240-2721N 21mm 3 7240-2744N 44mm 3

7240-2709N 9mm 4 7240-2722N 22mm 3 7240-2746N 46mm 3

7240-2710N 10mm 4 7240-2723N 23mm 3 7240-2748N 48mm 3

7240-2711N 11mm 4 7240-2724N 24mm 3 7240-2750N 50mm 3

7240-2712N 12mm 4 7240-2726N 26mm 3 7240-2755N 55mm 3

7240-2713N 13mm 4 7240-2728N 28mm 3 7240-2760N 60mm 3

7240-2714N 14mm 4 7240-2730N 30mm 3 7240-2765N 65mm 3

7240-2715N 15mm 4 7240-2732N 32mm 3 7240-2770N 70mm 3

7240-2716N 16mm 4 7240-2734N 34mm 3 7240-2775N 75mm 3

7240-2717N 17mm 4 7240-2736N 36mm 3 7240-2780N 80mm 3

7240-2718N 18mm 4 7240-2738N 38mm 3

2.7mm Locking Screw


7241-2706N 6mm 4 7241-2719 19mm 4 7241-2740N 40mm 3

7241-2707N 7mm 4 7241-2720N 20mm 4 7241-2742N 42mm 3

7241-2708N 8mm 4 7241-2721N 21mm 3 7241-2744N 44mm 3

7241-2709N 9mm 4 7241-2722N 22mm 3 7241-2746N 46mm 3

7241-2710N 10mm 4 7241-2723N 23mm 3 7241-2748N 48mm 3

7241-2711N 11mm 4 7241-2724N 24mm 3 7241-2750N 50mm 3

7241-2712N 12mm 4 7241-2726N 26mm 3 7241-2755N 55mm 3

7241-2713N 13mm 4 7241-2728N 28mm 3 7241-2760N 60mm 3

7241-2714N 14mm 4 7241-2730N 30mm 3 7241-2765N 65mm 3

7241-2715N 15mm 4 7241-2732N 32mm 3 7241-2770N 70mm 3

7241-2716N 16mm 4 7241-2734N 34mm 3 7241-2775N 75mm 3

7241-2717N 17mm 4 7241-2736N 36mm 3 7241-2780N 80mm 3

7241-2718N 18mm 4 7241-2738N 38mm 3

Washers

Cat No Description Diameter Qty Cat No Description Width Qty

7244-2120N Washer for 2.0mm Screws 5mm 4 7244-2220N Double Washer for 2.0mm

Screws


Screws


Screws

10mm 4

11mm 4

13mm 4


23

Osteopenia Screw Set

Set No 7141-0206N


7117-4971 3.0mm Osteopenia Screw Caddy 1

7117-4972 4.0mm Osteopenia Screw Caddy 1

3.0mm Osteopenia Screw

Cat No Length Qty Cat No Length Qty

7242-3010N 10mm 2 7242-3028N 28mm 2

7242-3012N 12mm 2 7242-3030N 30mm 2

7242-3014N 14mm 2 7242-3032N 32mm 2

7242-3016N 16mm 2 7242-3034N 34mm 2

7242-3018N 18mm 2 7242-3036N 36mm 2

7242-3020N 20mm 2 7242-3038N 38mm 2

7242-3022N 22mm 2 7242-3040N 40mm 2

7242-3024N 24mm 2 7242-3042N 42mm 2

7242-3026N 26mm 2 7242-3044N 44mm 2

Cat No Length Qty

7242-3046N 46mm 2

7242-3048N 48mm 2

7242-3050N 50mm 2

7242-3055N 55mm 2

7242-3060N 60mm 2

7242-3065N 65mm 2

7242-3070N 70mm 2

7242-3075N 75mm 2

7242-3080N 80mm 2



7242-4010N 10mm 2 7242-4028N 28mm 2

7242-4012N 12mm 2 7242-4030N 30mm 2

7242-4014N 14mm 2 7242-4032N 32mm 2

7242-4016N 16mm 2 7242-4034N 34mm 2

7242-4018N 18mm 2 7242-4036N 36mm 2

7242-4020N 20mm 2 7242-4038N 38mm 2

7242-4022N 22mm 2 7242-4040N 40mm 2

7242-4024N 24mm 2 7242-4042N 42mm 2

7242-4026N 26mm 2 7242-4044N 44mm 2

Cat No Length Qty

7242-4046N 46mm 2

7242-4048N 48mm 2

7242-4050N 50mm 2

7242-4055N 55mm 2

7242-4060N 60mm 2

7242-4065N 65mm 2

7242-4070N 70mm 2

7242-4075N 75mm 2

7242-4080N 80mm 2

4.0mm Partially Threaded Osteopenia Screw


7243-4026N 26mm 2 7243-4040N 40mm 2

7243-4028N 28mm 2 7243-4042N 42mm 2

7243-4030N 30mm 2 7243-4044N 44mm 2

7243-4032N 32mm 2 7243-4046N 46mm 2

7243-4034N 34mm 2 7243-4048N 48mm 2

7243-4036N 36mm 2 7243-4050N 50mm 2

7243-4038N 38mm 2 7243-4055N 55mm 2

Cat No Length Qty

7243-4060N 60mm 2

7243-4065N 65mm 2

7243-4070N 70mm 2

7243-4075N 75mm 2

7243-4080N 80mm 2


24

Smith & Nephew, Inc.

1450 Brooks Road

Memphis, TN 38116

USA

www.smith-nephew.com

Telephone: 1-901-396-2121

Information: 1-800-821-5700

Orders and Inquiries: 1-800-238-7538

Trademark of Smith & Nephew. Certain marks Reg. US Pat. & TM Off.

©2015 Smith & Nephew.

All rights reserved.

00749 V4 71182196 REVC 04/15

A trauma system for the mini pieces

Evolving Possibilities1

Each trauma case presents the unexpected, and putting the pieces

back together can often bring forth its own set of challenges.

Traditional mini fragment systems are designed for small bone anatomy.

• Radius of curvature to match small bone anatomy

• Limited plate options

• Limited screw lengths

• Screws designed for cortical bone only

Evolved specifically for trauma surgery,

the EVOS MINI Plating System provides solutions

for overcoming these challenges.

Evolving

surgeries

The EVOS MINI Plating System is organized to follow

the flow of surgery while respecting the overall footprint.

4

2.0mm

2.4mm

2.7mm


Plate Tray


5

Unique plate geometries

for long bones

Quickly switch between plate sizes without pulling out individual modules.

2.0mm

2.4mm

2.7mm

• 16 Plate options

• Plates up to 101mm





Variable-angle locking technology

30° Cone

Allows placement of a locking screw up to 15 degrees off-axis

6

Tabs deflect to engage the

threads of the locking screw

Plate

options

T-Plate

Availabe in both a 2 and 3 hole

head option

Flex Plate

Can be contoured in three planes

to address variable anatomy

Strength Plate

Provides a thicker and more stable

option compared to the flex and

tine plates

Straight Tine Plate

Y-Tine Plate

Y-Plate

Designed specifically to engage bone

fragments for fragment manipulation

Similar to the Straight Tine plate but with

a broader head and more points

of fixation

The Y-design allows the head to be

contoured to address anatomical needs

Triangle Plate

Trapezoid Plate

Multiple points of fixation in the head

to address complex fracture patterns

Utility design for unique fractures

7

Size-specific

modules

Each plate size has a coinciding module containing

all instrumentation needed for screw implantation.

2.0mm

• Screws up to 40mm

• Locking and Non-Locking

• Single and Double Washers

2.7mm


• 4.0mm Osteopenia Screws available

Fully and Partially Threaded


2.4mm


• 3.0mm Osteopenia Screws available

Fully Threaded


8

Positive

stops

Provides a quick visual confirmation that

the screws are stocked in the correct location.

Screw is too long

Screw is too short

9

Screw options

and low profile

constructs

Plates and screws are designed to ensure

an overall low-profile construct whether screws

are placed on or off-axis.

• Osteopenia screws feature an optimized

thread pitch for strong purchase in

cancellous or osteopenic bone

• Flat screw heads ensure the

entire construct is low-profile,

not just the plate

• T6, T7 and T8 tapered Torx drivers

for screw retainment

10


7135 Goodlett Farms Parkway

Cordova, TN 38016

USA

Trademark of Smith & Nephew. Certain marks Reg. US Pat. & TM Office.


©2014 Smith & Nephew, Inc.

01746 V1 09/14

EVOS MINI Plating System Tray Layout


01746 V1 09/14

Exploded view


2.0mm 2.4mm 2.7mm

Plate Tray



01746 V1 09/14


H

A

M

N

E

K

P

J

Q

B

T

W

V

U

I

R

S

L

G

D

O

F

C

General Instruments

Cat. No. Description Qty Reference

7117-0015 Quick Coupling Handle 1 A

7117-0034 Holding Sleeve 1 B

7117-0043 Sharp Hook 1 C

7117-0045 Screw Forceps 1 D

7117-0047 Plate Cutting Forceps 1 E

7117-0055 Hohmann Retractor, 6mm 2 F

7117-0095 Hohmann Retractor, 15mm 2 G

7117-0097 Periosteal Elevator 1 H

7117-3369 Hohmann Retractor, Bent 2 I

7117-3377 Reduction Forceps with Points, Broad 2 J

7117-3378 Reduction Forceps, Serrated Jaw 2 K

7117-3528 Cannulated AO to Trinkle Adapter 1 L

7117-3543 Tear Drop Screwdriver Handle 1 M

7117-4928 2.4/2.7mm Depth Gauge, Long 1 N

7117-4941 Bending Irons 2 O

7117-4960 Plate Bending Pliers 1 P



7117-4920 T6 Fixed Handle Driver 1 Q

7117-4926 T7 Fixed Handle Driver 1 R

7117-4932 T8 Fixed Handle Driver 1 S

Disposables


7110-1413 1.1mm Drill Tip K-wire, 150mm 6 T

7110-1501 2.0mm Drill Tip K-wire, 150mm 6 U

7110-1502 1.6mm Drill Tip K-wire, 150mm 6 V

7110-1503 1.25mm Drill Tip K-wire, 150mm 6 W


01746 V1 09/14

Plate tray

2.0mm T-Plate

Cat. No. Description Length Qty Reference

7244-2050N 2 Hole Head, 6H 36mm 1 A

7244-2052N 2 Hole Head, 8H 46mm 1 A

7244-2054N 3 Hole Head, 5H 31mm 1 A

A

E

K

L

J

M

S

Q

R

P

7244-2056N 3 Hole Head, 9H 51mm 1 A

D

I

H

2.0mm Flex Plate


T

U

V

7244-2058N 4H 21mm 1 B

7244-2060N 6H 31mm 1 B

7244-2062N 8H 41mm 1 B

7244-2064N 10H 51mm 1 B

7244-2066N 20H 101mm 1 B

B

C

F

G

N

O



7244-2068N 4H 21mm 1 C

7244-2070N 6H 31mm 1 C

7244-2072N 8H 41mm 1 C

7244-2074N 10H 51mm 1 C

7244-2076N 20H 101mm 1 C



7244-2078N 5H 28mm 1 D

7244-2080N 7H 38mm 1 D

2.4mm T-Plate


7244-2450N 2 Hole Head, 6H 43mm 1 E

7244-2452N 2 Hole Head, 8H 55mm 1 E

7244-2454N 3 Hole Head, 5H 37mm 1 E

7244-2456N 3 Hole Head, 9H 61mm 1 E

2.0mm 2.4mm 2.7mm

2.4mm Flex Plate


7244-2458N 4H 25mm 1 F

7244-2460N 6H 37mm 1 F

7244-2462N 8H 49mm 1 F

7244-2464N 10H 61mm 1 F

7244-2466N 20H 121mm 1 F



7244-2468N 4H 25mm 1 G

7244-2470N 6H 37mm 1 G

7244-2472N 8H 49mm 1 G

7244-2474N 10H 61mm 1 G

7244-2476N 20H 121mm 1 G


01746 V1 09/14

Plate tray

2.4mm Striaght Tine Plate


7244-2478N 5H 34mm 1 H

7244-2480N 7H 46mm 1 H

2.4mm Y-Plate


7244-2482N 5H 47mm 1 I

7244-2484N 7H 59mm 1 I

2.4mm Y-Tine Plate


7244-2486N 5H 45mm 1 J

7244-2488N 7H 57mm 1 J



7244-2764N 4H 28mm 1 O

7244-2766N 6H 42mm 1 O

7244-2768N 8H 56mm 1 O

7244-2770N 10H 70mm 1 O

7244-2772N 20H 140mm 1 O



7244-2774N 5H 38mm 1 P

7244-2776N 7H 52mm 1 P



7244-2490N 6H 55mm 1 K

7244-2492N 8H 67mm 1 K

2.7mm Y-Plate


7244-2778N 5H 55mm 1 Q

7244-2780N 7H 69mm 1 Q



7244-2494N Trapezoid Plate 24mm x 18mm 1 L

2.7mm T-Plate


7244-2720N 3 Hole Head, 5H 42mm 1 M

7244-2722N 3 Hole Head, 9H 71mm 1 M

2.7mm Flex Plate


7244-2724N 4H 28mm 1 N

7244-2726N 6H 42mm 1 N

7244-2728N 8H 56mm 1 N

7244-2760N 10H 70mm 1 N

7244-2762N 20H 140mm 1 N

2.7mm Y-Tine Plate


7244-2782N 5H 52mm 1 R

7244-2784N 7H 66mm 1 R



7244-2786N 6H 54mm 1 S

7244-2788N 8H 68mm 1 S

Disposables


7117-4904N 1.5mm Provisional Fixation Pin 2 T

7117-4909N 1.8mm Provisional Fixation Pin 2 U

7117-4914N 2.0mm Provisional Fixation Pin 2 V


01746 V1 09/14

2.0mm Screw and Size Specific

Instrumentation Module

H

I

B

C

J

G

F

E

D

A

2.0mm Module


7117-4978 2.0mm Screw and Instrument Caddy 1 A

7117-4979 2.0mm Screw and Instrument Caddy Lid 1 B

7117-4921 T6 Driver Shaft w/AO QC 2 C

7117-4922 2.0mm Depth Gauge 1 D

7117-4923 2.0mm Countersink w/AO QC 1 E

7117-4924 1.5/2.0mm Drill Guide 1 F

7117-4925 1.5mm Variable Angle Drill Guide 1 G

Disposables


7117-4915 2.0mm Tap w/AO QC 1 H

7117-4902 2.0mm Over Drill w/AO QC 1 I

7117-4901 1.5mm Drill w/AO QC 2 J


01746 V1 09/14



2.0mm Cortex Screw

2.0mm Locking Screw

Cat. No. Length Qty Reference

7240-2006N 6mm 2 A

7240-2007N 7mm 2 A


7241-2006N 6mm 2 B

7241-2007N 7mm 2 B

A

7240-2008N 8mm 2 A

7240-2009N 9mm 2 A

7240-2010N 10mm 3 A

7240-2011N 11mm 3 A

7240-2012N 12mm 3 A

7240-2013N 13mm 3 A

7240-2014N 14mm 3 A

7240-2015N 15mm 3 A

7240-2016N 16mm 3 A

7240-2017N 17mm 3 A

7240-2018N 18mm 3 A

7240-2019N 19mm 3 A

7240-2020N 20mm 3 A

7240-2021N 21mm 3 A

7240-2022N 22mm 3 A

7240-2023N 23mm 3 A

7240-2024N 24mm 3 A

7240-2026N 26mm 3 A

7240-2028N 28mm 3 A

7240-2030N 30mm 3 A

7240-2032N 32mm 3 A

7240-2034N 34mm 3 A

7240-2036N 36mm 3 A

7240-2038N 38mm 3 A

7241-2008N 8mm 2 B

7241-2009N 9mm 2 B

7241-2010N 10mm 3 B

7241-2011N 11mm 3 B

7241-2012N 12mm 3 B

7241-2013N 13mm 3 B

7241-2014N 14mm 3 B

7241-2015N 15mm 3 B

7241-2016N 16mm 3 B

7241-2017N 17mm 3 B

7241-2018N 18mm 3 B

7241-2019N 19mm 3 B

7241-2020N 20mm 3 B

7241-2021N 21mm 3 B

7241-2022N 22mm 3 B

7241-2023N 23mm 3 B

7241-2024N 24mm 3 B

7241-2026N 26mm 3 B

7241-2028N 28mm 3 B

7241-2030N 30mm 3 B

7241-2032N 32mm 3 B

7241-2034N 34mm 3 B

7241-2036N 36mm 3 B

7241-2038N 38mm 3 B

C

B

D

7240-2040N 40mm 3 A

7241-2040N 40mm 3 B

Washers

Cat. No. Description Diameter Qty Reference

7244-2120N Washer for 2.0mm Screws 5mm 4 C

7244-2224N Double Washer for 2.0mm Screws 10mm 4 D


01746 V1 09/14



K

C

I

M

B

J

E

F

L

D

H

G

A

2.4mm Module




7117-4971 3.0mm Osteopenia Screw Caddy 1 C

7117-4927 T7 Driver Shaft w/AO QC 2 D

7117-4959 2.4/2.7mm Depth Gauge 1 E

7117-4969 2.4mm Countersink w/AO QC 1 F

7117-4930 1.8/2.4mm Drill Guide 1 G

7117-4931 1.8mm Variable Angle Drill Guide 1 H

Disposables


7117-4916 2.4mm Tap w/AO QC 1 I

7117-4905 1.8mm Short Drill w/AO QC 2 J

7117-4906 1.8mm Long Drill w/AO QC 2 K

7117-4907 2.4mm Over Drill w/AO QC 1 L

7117-4918 3.0mm Tap w/AO QC 1 M


01746 V1 09/14



2.4mm Cortex Screw


7240-2406N 6mm 2 A

7240-2407N 7mm 2 A

7240-2408N 8mm 2 A

7240-2409N 9mm 2 A

7240-2410N 10mm 4 A

7240-2411N 11mm 4 A

7240-2412N 12mm 4 A

7240-2413N 13mm 4 A

7240-2414N 14mm 4 A

7240-2415N 15mm 4 A

7240-2416N 16mm 4 A

7240-2417N 17mm 4 A

7240-2418N 18mm 4 A

7240-2419N 19mm 4 A

7240-2420N 20mm 4 A

7240-2421N 21mm 3 A

7240-2422N 22mm 3 A

7240-2423N 23mm 3 A

7240-2424N 24mm 3 A

7240-2426N 26mm 3 A

7240-2428N 28mm 3 A

7240-2430N 30mm 3 A

7240-2432N 32mm 3 A

7240-2434N 34mm 3 A

7240-2436N 36mm 3 A

7240-2438N 38mm 3 A

7240-2440N 40mm 3 A

7240-2442N 42mm 2 A

7240-2444N 44mm 2 A

7240-2446N 46mm 2 A

7240-2448N 48mm 2 A

7240-2450N 50mm 2 A

7240-2455N 55mm 2 A

7240-2460N 60mm 2 A

7240-2465N 65mm 2 A

7240-2470N 70mm 2 A

7240-2475N 75mm 2 A

7240-2480N 80mm 2 A

2.4mm Locking Screw


7241-2406N 6mm 2 B

7241-2407N 7mm 2 B

7241-2408N 8mm 2 B

7241-2409N 9mm 2 B

7241-2410N 10mm 4 B

7241-2411N 11mm 4 B

7241-2412N 12mm 4 B

7241-2413N 13mm 4 B

7241-2414N 14mm 4 B

7241-2415N 15mm 4 B

7241-2416N 16mm 4 B

7241-2417N 17mm 4 B

7241-2418N 18mm 4 B

7241-2419N 19mm 4 B

7241-2420N 20mm 4 B

7241-2421N 21mm 3 B

7241-2422N 22mm 3 B

7241-2423N 23mm 3 B

7241-2424N 24mm 3 B

7241-2426N 26mm 3 B

7241-2428N 28mm 3 B

7241-2430N 30mm 3 B

7241-2432N 32mm 3 B

7241-2434N 34mm 3 B

7241-2436N 36mm 3 B

7241-2438N 38mm 3 B

7241-2440N 40mm 3 B

7241-2442N 42mm 2 B

7241-2444N 44mm 2 B

7241-2446N 46mm 2 B

7241-2448N 48mm 2 B

7241-2450N 50mm 2 B

7241-2455N 55mm 2 B

7241-2460N 60mm 2 B

7241-2465N 65mm 2 B

7241-2470N 70mm 2 B

7241-2475N 75mm 2 B

7241-2480N 80mm 2 B


E


7242-3010N 10mm 2 C

7242-3012N 12mm 2 C

A B

7242-3014N 14mm 2 C

7242-3016N 16mm 2 C

C

7242-3018N 18mm 2 C

7242-3020N 20mm 2 C

7242-3022N 22mm 2 C

7242-3024N 24mm 2 C

7242-3026N 26mm 2 C

7242-3028N 28mm 2 C

7242-3030N 30mm 2 C

7242-3032N 32mm 2 C

7242-3034N 34mm 2 C

7242-3036N 36mm 2 C

7242-3038N 38mm 2 C

7242-3040N 40mm 2 C

7242-3042N 42mm 2 C

7242-3044N 44mm 2 C

7242-3046N 46mm 2 C

7242-3048N 48mm 2 C

7242-3050N 50mm 2 C

7242-3055N 55mm 2 C

D

7242-3060N 60mm 2 C

7242-3065N 65mm 2 C

7242-3070N 70mm 2 C

7242-3075N 75mm 2 C

7242-3080N 80mm 2 C

Washers


7244-2220N Washer for 2.4mm Screws 6mm 4 D

7244-2127N Double Washer for 2.4mm Screws 11mm 4 E


01746 V1 09/14



C

L

E

B

J

M

K

F

I

D

H

G

A

2.7mm Module




7117-4972 4.0mm Osteopenia Screw Caddy 1 C

7117-4933 T8 Driver Shaft w/AO QC 2 D

7117-4959 2.4/2.7mm Depth Gauge 1 E

7117-4929 2.7mm Countersink w/AO QC 1 F

7117-4934 2.0/2.7mm Drill Guide 1 G

7117-4935 2.0mm Variable Angle Drill Guide 1 H

Disposables


7117-3366 2.7mm Tap w/AO QC 1 I

7117-3386 4.0mm Tap w/AO QC 1 J

7117-4910 2.0mm Short Drill w/AO QC 2 K

7117-4911 2.0mm Long Drill w/AO QC 2 L

7117-4912 2.7mm Over Drill w/AO QC 1 M


01746 V1 09/14



2.7mm Locking Screw


7240-2706N 6mm 2 A

7240-2707N 7mm 2 A

7240-2708N 8mm 2 A

7240-2709N 9mm 2 A

7240-2710N 10mm 4 A

7240-2711N 11mm 4 A

7240-2712N 12mm 4 A

7240-2713N 13mm 4 A

7240-2714N 14mm 4 A

7240-2715N 15mm 4 A

7240-2716N 16mm 4 A

7240-2717N 17mm 4 A

7240-2718N 18mm 4 A

7240-2719N 19mm 4 A

7240-2720N 20mm 4 A

7240-2721N 21mm 3 A

7240-2722N 22mm 3 A

7240-2723N 23mm 3 A

7240-2724N 24mm 3 A

7240-2726N 26mm 3 A

7240-2728N 28mm 3 A

7240-2730N 30mm 3 A

7240-2732N 32mm 3 A

7240-2734N 34mm 3 A

7240-2736N 36mm 3 A

7240-2738N 38mm 3 A

7240-2740N 40mm 3 A

7240-2742N 42mm 2 A

7240-2744N 44mm 2 A

7240-2746N 46mm 2 A

7240-2748N 48mm 2 A

7240-2750N 50mm 2 A

7240-2755N 55mm 2 A

7240-2760N 60mm 2 A

7240-2765N 65mm 2 A

7240-2770N 70mm 2 A

7240-2775N 75mm 2 A

7240-2780N 80mm 2 A

2.7mm Locking Screw


7241-2706N 6mm 2 B

7241-2707N 7mm 2 B

7241-2708N 8mm 2 B

7241-2709N 9mm 2 B

7241-2710N 10mm 4 B

7241-2711N 11mm 4 B

7241-2712N 12mm 4 B

7241-2713N 13mm 4 B

7241-2714N 14mm 4 B

7241-2715N 15mm 4 B

7241-2716N 16mm 4 B

7241-2717N 17mm 4 B

7241-2718N 18mm 4 B

7241-2719N 19mm 4 B

7241-2720N 20mm 4 B

7241-2721N 21mm 3 B

7241-2722N 22mm 3 B

7241-2723N 23mm 3 B

7241-2724N 24mm 3 B

7241-2726N 26mm 3 B

7241-2728N 28mm 3 B

7241-2730N 30mm 3 B

7241-2732N 32mm 3 B

7241-2734N 34mm 3 B

7241-2736N 36mm 3 B

7241-2738N 38mm 3 B

7241-2740N 40mm 3 B

7241-2742N 42mm 2 B

7241-2744N 44mm 2 B

7241-2746N 46mm 2 B

7241-2748N 48mm 2 B

7241-2750N 50mm 2 B

7241-2755N 55mm 2 B

7241-2760N 60mm 2 B

7241-2765N 65mm 2 B

7241-2770N 70mm 2 B

7241-2775N 75mm 2 B

7241-2780N 80mm 2 B



7242-4010N 10mm 2 C

7242-4012N 12mm 2 C

7242-4014N 14mm 2 C

7242-4016N 16mm 2 C

7242-4018N 18mm 2 C

7242-4020N 20mm 2 C

7242-4022N 22mm 2 C

7242-4024N 24mm 2 C

7242-4026N 26mm 2 C

7242-4028N 28mm 2 C

7242-4030N 30mm 2 C

7242-4032N 32mm 2 C

7242-4034N 34mm 2 C

7242-4036N 36mm 2 C

7242-4038N 38mm 2 C

7242-4040N 40mm 2 C

7242-4042N 42mm 2 C

7242-4044N 44mm 2 C

7242-4046N 46mm 2 C

7242-4048N 48mm 2 C

7242-4050N 50mm 2 C

7242-4055N 55mm 2 C

7242-4060N 60mm 2 C

7242-4065N 65mm 2 C

7242-4070N 70mm 2 C

7242-4075N 75mm 2 C

7242-4080N 80mm 2 C

4.0mm Partially Threaded Osteopenia Screw


7243-4026N 26mm 2 D

7243-4028N 28mm 2 D

7243-4030N 30mm 2 D

7243-4032N 32mm 2 D

7243-4034N 34mm 2 D

7243-4036N 36mm 2 D

7243-4038N 38mm 2 D

7243-4040N 40mm 2 D

7243-4042N 42mm 2 D

C

D

A


7243-4044N 44mm 2 D

7243-4046N 46mm 2 D

7243-4048N 48mm 2 D

7243-4050N 50mm 2 D

7243-4055N 55mm 2 D

7243-4060N 60mm 2 D

7243-4065N 65mm 2 D

7243-4070N 70mm 2 D

7243-4075N 75mm 2 D

7243-4080N 80mm 2 D

Washers

B

F

E


7244-2124N

7244-2227N

Washer for

2.7mm Screws 7mm 4 E

Double Washer

for 2.7mm

Screws 13mm 4 F


01746 V1 09/14

Ordering

information

Cat. No. Description

7141-0200 EVOS MINI General Instrument Set

7141-0201N EVOS MINI Plate Set

7141-0202 EVOS MINI Disposable Set

7141-0203 EVOS MINI Size Specific Instrument Set

7141-0204N EVOS MINI Screw Set

7141-0205 EVOS MINI Plate Template Set

7141-0206N EVOS MINI Osteopenia Screw Set



Cordova, TN 38016

USA


Telephone: 1-901-396-2121



Trademark of Smith & Nephew. Certain marks Reg. US Pat. & TM Office

0 0 7 5 7 V 3 1 0 1 4


00757 V3 10/14


01746 V1 09/14

Pocket

Reference

Guide

Product overview

The EVOS MINI Plating System consists of

stainless steel, variable-angle locking, low

profile plates paired with screw options for both

small and long bone applications which makes

this an ideal system for Traumatologists.

Plate design

Made using 316L stainless steel, the EVOS MINI

Plating System provides unique plate geometries

for both small and long bone anatomy. Plates

in varying lengths and geometries address a

multitude of trauma applications.

Tine plates are designed specifically to engage

bone fragments for fragment manipulation.

Strength plates provide a thicker and more stable

option compared to the flex and tine plates.

Flex plates can be contoured in three planes to

address variable anatomy.

Low profile

The plates are designed to ensure low profile fixation

in areas of minimal soft-tissue coverage. Additionally,

the screws in the system feature a flat head to sit

flush when used independently or through a plate.

Variable-Angle technology

Each screw hole contains

five separate tabs that

engage the threads of the

locking screw head to form

a fixed-angle construct.

This feature combines the

benefits of both monoaxial and polyaxial locked

plating concepts into one intuitive system allowing

locking screws to be angled up to 15° off axis.

Osteopenia Screws

Whether used with a plate or independently,

Osteopenia Screws are designed with an optimized

thread form for use in areas of poor bone quality.

Intuitive instrumentation

Standardized AO connections and color-coded

instrumentation offer a seamless transition between the

EVOS MINI Plating System and other implant systems.

Product overview

Product overview

Indications

The Smith & Nephew EVOS MINI Plating System

is indicated for adolescent (12 – 18 years) and

transitional adolescent (18 – 21 years) subpopulations

and adults, as well as patients with osteopenic bone.

The Smith & Nephew EVOS MINI Plating System

is indicated for fracture fixation, arthrodesis,

reconstruction, replantation or reduction of small

bones and small bone fragments. This system is

also indicated for non-load bearing stabilization and

reduction of bone fragments in long bones.

2.0mm plates

Geometry Sizes Thickness Shaft width

Hole

spacing

Longest

plate

length

T-Plate 2

Hole Head

6H

8H

1.2mm

Shaft: 5.0mm

Head: 10.2mm

5mm 46mm

T-Plate 3

Hole Head

5H

9H

1.2mm

Shaft: 5.0mm

Head: 15.3mm

5mm

51mm

Flex Plate

4H

6H

8H

10H

20H

1.2mm 5.0mm 5mm 101mm

Straight

Tine Plate

Strength

Plate

5H

7H

4H

6H

8H

10H

20H

1.2mm 5.0mm 5mm 38mm

1.3mm 5.0mm 5mm 101mm

Plate options

Plate options

2.4mm plates


Hole

spacing

Longest

plate

length

T-Plate 2

Hole Head

6H

8H

1.4mm

Shaft: 6.0mm

Head: 12.3mm

6mm

55mm

T-Plate 3

Hole Head

5H

9H

1.4mm

Shaft: 6.0mm

Head: 18.3mm

6mm

61mm

Flex Plate

4H

6H

8H

10H

20H

1.4mm 6.0mm 6mm 121mm

Straight

Tine Plate

Strength

Plate

5H

7H

4H

6H

8H

10H

20H


1.9mm 6.0mm 6mm 121mm

Y-Plate

5H

7H

1.4mm

Shaft: 6.0mm

Head: 18.3mm

6mm

60mm

2.4mm plates


Hole

spacing

Longest

plate

length

Y-Tine

Plate

5H

7H

1.4mm

Shaft: 6.0mm

Head: 12.9mm

6mm

57mm

Triangle

Plate

6H

8H

1.4mm

Shaft: 6.0mm

Head: 18.5mm

6mm

67mm

Trapezoid

Plate

5H

1.4mm

Top: 17.8mm

Bottom: 24.0mm

Height: 17.8mm

NA

NA

Plate options

Plate options

2.7mm plates


Hole

spacing

Longest

plate

length

T-Plate 3

Hole Head

5H

9H

1.4mm

Shaft: 7.5mm

Head: 21.5mm

7mm 71mm

Flex Plate

4H

6H

8H

10H

20H

1.4mm 7.5mm 7mm 140mm

Straight

Tine Plate

Strength

Plate

5H

7H

4H

6H

8H

10H

20H


2.2mm 7.5mm 7mm 140mm

Y-Plate

5H

7H

1.4mm

Shaft: 7.5mm

Head: 21.5mm

7mm

71mm

2.7mm plates


Hole

spacing

Longest

plate

length

Y-Tine

Plate

5H

7H

1.4mm

Shaft: 7.5mm

Head: 14.3mm

7mm 68mm

Triangle

Plate

6H

8H

1.4mm

Shaft: 7.5mm

Head: 19.8mm

7mm 68mm

Plate options

Screw options

2.0mm

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch

Driver Screw lengths

Thread

length

Cortex Screw

2.0mm 3.0mm 1.3mm 0.6mm T6

Locking Screw

2.0mm 3.3mm 1.3mm 0.6mm T6

6 – 24mm

(1mm increments)

26 – 40mm

(2mm increments)

6 – 24mm

(1mm increments)

26 – 40mm

(2mm

increments)

–

–

2.4mm

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch


Thread

length

Cortex Screw

2.4mm 3.8mm 1.6mm 1.0mm T7

Locking Screw

2.4mm 3.6mm 1.6mm 1.0mm T7

6 – 24mm

(1mm Increments)

26 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

6 – 24mm

(1mm Increments)

26 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

–

–

3.0mm

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch


Thread

length

Osteopenia Screw

3.0mm 3.7mm 1.6mm 1.5mm T7

10 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

–

Screw options

Screw options

2.7mm

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch


Thread

length

Cortex Screw

2.7mm 4.5mm 2.0mm 1.0mm T8

Locking Screw

6 – 24mm

(1mm Increments)

26 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

–

2.7mm 4.3mm 2.0mm 1.0mm T8

6 – 24mm

(1mm Increments)

26 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

–

4.0mm

Thread

diameter

Head

diameter

Core

diameter

Thread

pitch


Thread

length

Fully Threaded Osteopenia Screw

4.0mm 4.5mm 2.0mm 2.0mm T8

Partially Threaded Osteopenia Screw

4.0mm 4.5mm 2.0mm 2.0mm T8

10 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

26 – 50mm

(2mm Increments)

55 – 80

(5mm Increments)

–

40% of

screw

length

Screw options


Description

Plate

size

Variable

Angle/Fixed

Angle Drill Guide

Double Ended

Drill Guide

Drill

Bit

2.0mm Screws



2.4mm Screws



3.0mm Screws

Osteopenia

Screws

2.7mm Screws

2.4mm 1.8mm NA 1.8mm



4.0mm Screws

Osteopenia

Screws

2.7mm 2.0mm NA 2.0mm

Description Over Countersink Depth Gauge Tap

Drill

Bit

Self

Retaining

Screwdriver

2.0mm Screws

Cortex Screw 2.0mm 2.0mm 2.0mm 2.0mm T6

Locking Screw NA 2.0mm 2.0mm 2.0mm T6

2.4mm Screws

Cortex Screw 2.4mm 2.4mm 2.4mm 2.7mm 2.4mm T7

Locking Screw NA 2.4mm 2.4mm 2.7mm 2.4mm T7

3.0mm Screws

Osteopenia

Screws

NA 2.4mm 2.4mm 2.7mm 3.0mm T7

2.7mm Screws

Cortex Screw 2.7mm 2.7mm 2.4mm 2.7mm 2.7mm T8

Locking Screw NA 2.7mm 2.4mm 2.7mm 2.7mm T8

4.0mm Screws

Osteopenia

Screws

NA 2.7mm 2.4mm 2.7mm 4.0mm T8


Catalog: General Instrument Set

EVOS MINI General Instrument Set

Set No 7141-0200


7117-4970 General Instrument Tray 1

7117-4947 Plate Tray 1

7117-4948 Plate Tray Lid 1

7117-4949 Instrument and Implant Set Case

7117-4950 Instrument and Implant Set Case Lid

1

1

7117-0043 Sharp Hook 1

7117-0047 Plate Cutting Forceps 1

7117-0055 Hohmann Retractor, 6mm 2

7117-0095 Hohmann Retractor, 15mm 2

7117-0097 Periosteal Elevator 1

7117-3369 Hohmann Retractor, Bent 2

7117-3377 Reduction Forceps wit Points, Broad 2

7117-3378 Reduction Forceps, Serrated Jaw 2

7117-3528 Cannulated AO to Trinkle Adapter 1

7117-3543 Tear Drop Screwdriver Handle 1

7117-4928 2.4/2.7mm Depth Gauge, Long 1

7117-4941 Bending Irons 2

7117-4960 Plate Bending Pliers 1

7117-0034 Holding Sleeve 1

7117-0045 Screw Forceps 1

7117-0015 Quick Coupling Handle 1


Set No 7141-0203

2.0mm






7117-4922 2.0mm Depth Gauge 1


7117-4924 1.5/2.0mm Drill Guide 1


2.4mm








7117-4930 1.8/2.4mm Drill Guide 1


2.7mm








7117-4934

7117-4935

2.0/2.7mm Drill Guide

2.0mm Variable Angle Drill Guide 1

Catalog: Size Specific Instruments

Catalog: Disposables

Disposables

Set No 7141-0202


7110-1413 1.1mm Drill Tip K-wire, 150mm 6




7117-4901 1.5mm Drill w/AO QC 2











7117-4915 2.0mm Tap w/AO QC 1

7117-4916 2.4mm Tap w/AO QC 1

7117-3366 2.7mm Tap w/AO QC 1

7117-3386 4.0mm Tap w/AO QC 1

7117-4918 3.0mm Tap w/AO QC 1

Plate Sets

Set No 7141-0203

2.0mm T-Plate


7244-2050N 2 Hole Head, 6H 36mm 1

7244-2052N 2 Hole Head, 8H 46mm 1

7244-2054N 3 Hole Head, 5H 31mm 1

7244-2056N 3 Hole Head, 9H 51mm 1

2.0mm Flex Plate


7244-2058N 4H 21mm 1

7244-2060N 6H 31mm 1

7244-2062N 8H 41mm 1

7244-2064N 10H 51mm 1

7244-2066N 20H 101mm 1



7244-2068N 4H 21mm 1

7244-2070N 6H 31mm 1

7244-2072N 8H 41mm 1

7244-2074N 10H 51mm 1

7244-2076N 20H 101mm 1



7244-2078N 5H 28mm 1

7244-2080N 7H 38mm 1

Note: For Sterile Items, remove the ‘N’ from the Catalog Item number

Catalog: Plate Sets

Catalog: Plate Sets

2.4mm T-Plate


7244-2450N 2 Hole Head, 6H 43mm 1

7244-2452N 2 Hole Head, 8H 55mm 1

7244-2454N 3 Hole Head, 5H 37mm 1

7244-2456N 3 Hole Head, 9H 61mm 1

2.4mm Flex Plate


7244-2458N 4H 25mm 1

7244-2460N 6H 37mm 1

7244-2462N 8H 49mm 1

7244-2464N 10H 61mm 1

7244-2466N 20H 121mm 1



7244-2468N 4H 25mm 1

7244-2470N 6H 37mm 1

7244-2472N 8H 49mm 1

7244-2474N 10H 61mm 1

7244-2476N 20H 121mm 1



7244-2478N 5H 34mm 1

7244-2480N 7H 46mm 1


2.4mm Y-Plate


7244-2482N 5H 47mm 1

7244-2484N 7H 59mm 1

2.4mm Y-Tine Plate


7244-2486N 5H 45mm 1

7244-2488N 7H 57mm 1



7244-2490N 6H 55mm 1

7244-2492N 8H 67mm 1



7244-2494N Trapezoid Plate 24mm x 18mm 1


Catalog: Plate Sets

Catalog: Plate Sets

2.7mm T-Plate


7244-2720N 3 Hole Head, 5H 42mm 1

7244-2722N 3 Hole Head, 9H 71mm 1

2.7mm Flex Plate


7244-2724N 4H 28mm 1

7244-2726N 6H 42mm 1

7244-2728N 8H 56mm 1

7244-2760N 10H 70mm 1

7244-2762N 20H 140mm 1



7244-2764N 4H 28mm 1

7244-2766N 6H 42mm 1

7244-2768N 8H 56mm 1

7244-2770N 10H 70mm 1

7244-2772N 20H 140mm 1



7244-2774N 5H 38mm 1

7244-2776N 7H 52mm 1


2.7mm Y-Plate


7244-2778N 5H 55mm 1

7244-2780N 7H 69mm 1

2.7mm Y-Tine Plate


7244-2782N 5H 52mm 1

7244-2784N 7H 66mm 1



7244-2786N 6H 54mm 1

7244-2788N 8H 68mm 1


Catalog: Plate Sets

Catalog: Screw Sets

Screw Sets

Set No 7141-0204

2.0mm Cortex Screw

2.0mm Locking Screw


7240-2006N 6mm 2 7241-2006N 6mm 2

7241-2007N 7mm 2

7240-2007N 7mm 2

7241-2008N 8mm 2

7240-2008N 8mm 2

7241-2009N 9mm 2

7240-2009N 9mm 2

7241-2010N 10mm 3

7240-2010N 10mm 3

7241-2011N 11mm 3

7240-2011N 11mm 3

7241-2012N 12mm 3

7240-2012N 12mm 3

7241-2013N 13mm 3

7240-2013N 13mm 3

7241-2014N 14mm 3

7240-2014N 14mm 3

7241-2015N 15mm 3

7240-2015N 15mm 3

7241-2016N 16mm 3

7240-2016N 16mm 3

7241-2017N 17mm 3

7240-2017N 17mm 7240-2018N 18mm 3 7241-2018N 18mm 3

7240-2019N 19mm 3 7241-2019N 19mm 7241-2020N 20mm 3

7240-2020N 20mm 3

7241-2021N 21mm 3

7240-2021N 21mm 7240-2022N 22mm 3 7241-2022N 22mm 3

7241-2023N 23mm 3

7240-2023N 23mm 7240-2024N 24mm 3 7241-2024N 24mm 3

7241-2026N 26mm 3

7240-2026N 26mm 3

7241-2028N 28mm 3

7240-2028N 28mm 7240-2030N 30mm 3 7241-2030N 30mm 3

7241-2032N 32mm 3

7240-2032N 32mm 7240-2034N 34mm 3 7241-2034N 34mm 3

7241-2036N 36mm 3

7240-2036N 36mm 7240-2038N 38mm 3 7241-2038N 38mm 3

7241-2040N 40mm 3

7240-2040N 40mm 3


2.4mm Cortex Screw


7240-2406N 6mm 2 7240-2426N 26mm 3

7240-2407N 7mm 2 7240-2428N 28mm 3

7240-2408N 8mm 2

7240-2430N 30mm 3

7240-2409N 9mm 2 7240-2432N 32mm 3

7240-2410N 10mm 4 7240-2434N 34mm 3

7240-2411N 11mm 4 7240-2436N 36mm 3

7240-2412N 12mm 4 7240-2438N 38mm 3

7240-2413N 13mm 4 7240-2440N 40mm 3

7240-2414N 14mm 4 7240-2442N 42mm 2

7240-2415N 15mm 4 7240-2444N 44mm 2

7240-2416N 16mm 4 7240-2446N 46mm 2

7240-2417N 17mm 4 7240-2448N 48mm 2

7240-2418N 18mm 4 7240-2450N 50mm 2

7240-2419N 19mm 4 7240-2455N 55mm 2

7240-2420N 20mm 4 7240-2460N 60mm 2

7240-2421N 21mm 3 7240-2465N 65mm 2

7240-2422N 22mm 3 7240-2470N 70mm 2

7240-2423N 23mm 3 7240-2475N 75mm 2

7240-2424N 24mm 3 7240-2480N 80mm 2


Catalog: Screw Sets

Catalog: Screw Sets

2.4mm Locking Screw


7241-2406N 6mm 2

7241-2428N 28mm 3

7241-2430N 30mm 3

7241-2407N 7mm 2

7241-2408N 8mm 2 7241-2432N 32mm 3

7241-2409N 9mm 2

7241-2434N 34mm 3

7241-2410N 10mm 4 7241-2436N 36mm 3

7241-2411N 11mm 4 7241-2438N 38mm 3

7241-2412N 12mm 4

7241-2440N 40mm 3

7241-2413N 13mm 4 7241-2442N 42mm 2

7241-2414N 14mm 4 7241-2444N 44mm 2

7241-2415N 15mm 4 7241-2446N 46mm 2

7241-2416N 16mm 4 7241-2448N 48mm 2

7241-2417N 17mm 4

7241-2450N 50mm 2

7241-2418N 18mm 4 7241-2455N 55mm 2

7241-2419N 19mm 4 7241-2460N 60mm 2

7241-2420N 20mm 4 7241-2465N 65mm 2

7241-2421N 21mm 3 7241-2470N 70mm 2

7241-2422N 22mm 3 7241-2475N 75mm 2

7241-2423N 23mm 3 7241-2480N 80mm 2

7241-2424N

7241-2426N

24mm

26mm

3

3


2.7mm Cortex Screw


7240-2706N 6mm 2 7240-2726N 26mm 3

7240-2707N 7mm 2 7240-2728N 28mm 3

7240-2708N 8mm 2 7240-2730N 30mm 3

7240-2709N 9mm 2 7240-2732N 32mm 3

7240-2710N 10mm 4

7240-2734N 34mm 3

7240-2711N 11mm 4 7240-2736N 36mm 3

7240-2712N 12mm 4 7240-2738N 38mm 3

7240-2713N 13mm 4 7240-2740N 40mm 3

7240-2714N 14mm 4 7240-2742N 42mm 2

7240-2715N 15mm 4 7240-2744N 44mm 2

7240-2716N 16mm 4 7240-2746N 46mm 2

7240-2717N 17mm 4 7240-2748N 48mm 2

7240-2718N 18mm 4 7240-2750N 50mm 2

7240-2719N 19mm 4 7240-2755N 55mm 2

7240-2720N 20mm 4 7240-2760N 60mm 2

7240-2721N 21mm 3 7240-2765N 65mm 2

7240-2722N 22mm 3 7240-2770N 70mm 2

7240-2723N 23mm 3 7240-2775N 75mm 2

7240-2724N 24mm 3 7240-2780N 80mm 2


Catalog: Screw Sets

Catalog: Screw Sets

2.7mm Locking Screw


7241-2706N 6mm 2 7241-2726N 26mm 3

7241-2707N 7mm 2 7241-2728N 28mm 3

7241-2708N 8mm 2 7241-2730N 30mm 3

7241-2709N 9mm 2 7241-2732N 32mm 3

7241-2710N 10mm 4 7241-2734N 34mm 3

7241-2711N 11mm 4 7241-2736N 36mm 3

7241-2712N 12mm 4 7241-2738N 38mm 3

7241-2713N 13mm 4 7241-2740N 40mm 3

7241-2714N 14mm 4 7241-2742N 42mm 2

7241-2715N 15mm 4 7241-2744N 44mm 2

7241-2716N 16mm 4 7241-2746N 46mm 2

7241-2717N 17mm 4 7241-2748N 48mm 2

7241-2718N 18mm 4 7241-2750N 50mm 2

7241-2719N 19mm 4 7241-2755N 55mm 2

7241-2720N 20mm 4 7241-2760N 60mm 2

7241-2721N 21mm 3 7241-2765N 65mm 2

7241-2722N 22mm 3 7241-2770N 70mm 2

7241-2723N 23mm 3 7241-2775N 75mm 2

7241-2724N 24mm 3 7241-2780N 80mm 2

Washers

Cat No Description Width Qty

7244-2120N

7244-2124N

Washer for 2.0mm Screws

Washer for 2.4mm Screws

5mm

6mm

4

4

7244-2127N Washer for 2.7mm Screws 7mm 4

7244-2220N Double Washer for 2.0mm Screws 10mm 4




Osteopenia Screw Set

Set No 7141-0206


7117-4945N 3.0mm Osteopenia Screw Caddy 1

7117-4946N 4.0mm Osteopenia Screw Caddy 1


Cat No Length Qty

Cat No Length Qty

7242-3010N 10mm 2 7242-3038N 38mm 2

7242-3012N 12mm 2 7242-3040N 40mm 2

7242-3014N 14mm 2 7242-3042N 42mm 2

7242-3016N 16mm 2 7242-3044N 44mm 2

7242-3018N 18mm 2 7242-3046N 46mm 2

7242-3020N 20mm 2 7242-3048N 48mm 2

7242-3022N 22mm 2 7242-3050N 50mm 2

7242-3024N 24mm 2 7242-3055N 55mm 2

7242-3026N 26mm 2 7242-3060N 60mm 2

7242-3028N 28mm 2 7242-3065N 65mm 2

7242-3030N 30mm 2 7242-3070N 70mm 2

7242-3032N 32mm 2 7242-3075N 75mm 2

7242-3034N 34mm 2 7242-3080N 80mm 2

7242-3036N 36mm 2


Catalog: Screw Sets

Catalog: Screw Sets


4.0mm Partially Threaded

Osteopenia Screw

Cat No Length Qty

7242-4010N 10mm 2

7242-4012N

7242-4014N

12mm

14mm

2

2

7242-4016N 16mm 2

7242-4018N 18mm 2

7242-4020N 20mm 2

7242-4022N 22mm 2

7242-4024N 24mm 2

7242-4026N 26mm 2

7242-4028N 28mm 2

7242-4030N 30mm 2

7242-4032N 32mm 2

7242-4034N 34mm 2

7242-4036N 36mm 2

7242-4038N 38mm 2

7242-4040N 40mm 2

7242-4042N 42mm 2

7242-4044N 44mm 2

7242-4046N 46mm 2

7242-4048N 48mm 2

7242-4050N 50mm 2

7242-4055N 55mm 2

7242-4060N 60mm 2

7242-4065N 65mm 2

7242-4070N 70mm 2

7242-4075N 75mm 2

7242-4080N 80mm 2

Cat No Length Qty

7243-4026N 26mm 2

7243-4028N

7243-4030N

28mm

30mm

2

2

7243-4032N 32mm 2

7243-4034N 34mm 2

7243-4036N 36mm 2

7243-4038N 38mm 2

7243-4040N 40mm 2

7243-4042N 42mm 2

7243-4044N 44mm 2

7243-4046N 46mm 2

7243-4048N 48mm 2

7243-4050N 50mm 2

7243-4055N 55mm 2

7243-4060N 60mm 2

7243-4065N 65mm 2

7243-4070N 70mm 2




Cordova, TN 38016

USA


Telephone: 1-901-396-2121




All rights reserved.

Trademark of Smith & Nephew.

Certain marks Reg. US Pat. & TM Off.

00754 V1 08/14

Evos Mini - Documents

Create successful ePaper yourself

Delete template?

Save as template?