agricultural-gearbox-pto-shaft-20200714压缩

GEARBOX for Agricultural Machine

EP-7241

EVER-POWER GROUP CO., LTD.

ITEM Ratio Teeth Module

Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

EP-7241 3:1 10/30 5.0 30 540 rpm

31.75 Optic axis

50.8 Optic axis

18.5Kg

EVER-POWER GROUP CO., LTD. -7- HZPTCORP@GMAIL.COM


EP-01-725



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

01-725 3:18:1 11/35 5.08 40 540 rpm

31.75 Optic axis

50.8 Optic axis

27.5Kg



EP-2300058



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

2300058 4.08:1 12/49 4.5 40 540 rpm

1 3/8 Z6

Optic axis

58.5Kg



EP-GT40U



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

GT40U 3:1 11/33 5.0 30 540 rpm 13/8 Z6 Optic axis 27.2Kg



EP-650PHD



Power Rated Input/output

(HP) Input

description

Weight

(N.W)

650PHD 2.92:1 13/38 4.25 30 540 rpm

Optic axis

Optic axis

24.1Kg



EP-01-609/723/611




(HP) Input

description

Weight

(N.W)

01-609 1:1.47 15/22 5.08 35

01-723 1:1.69 13/22 5.0 35

01-611 1:1.93 15/29 4.0 30

540 rpm

1 3/8 Z6 Optic axis

Cone base aequilate

spline shaft

26.5Kg



EP-4DH-01-084



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

4DH-01-

084

4:1 44/11 5.0 45 540 rpm

1 3/8 Z6

Φ 50.8Optic axis

24.1Kg



EP-01-707B



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

01-707B 1:1.44 23/16 6.0 60 800 rpm

1 3/4 Z20

Cone base aequilate

spline

37Kg



EP-9.140



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

9.140.804.20 1:1.93 14/27 5.64

9.140.870.10 1:1.5 14/21 5.7

60 800 rpm

1 3/8 Z6

Cone base aequilate

spline

28.5Kg



EP-966109



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

966109 1:1.92 14/27 5.5 60 540 rpm

1 3/8 Z6

Cone base aequilate

spline

37Kg



EP-55




(HP) Input

description

Weight

(N.W)

EP-55 1:1.6 15/24 6.0 50 540 rpm

1 3/8 Z6

Cone base aequilate

spline

28.7Kg



EP-966194



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

966194 1:1.21 14/17 7.0 70 540 rpm

1 3/8 Z6

Cone base aequilate

spline

37.5Kg



EP-GS4RC



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

GS4RC-193 1:1.93 23/12 5.0

GS4RC-146 1:1.47 22/15 5.08

30 540 rpm

1 3/8 Z6

Cone base aequilate

spline

17Kg



EP-GS6RC-H




(HP) Input

description

Weight

(N.W)

GS6RC-H 1:1.46 19/13 7.0 60 540 rpm

1 3/8 Z6

Cone base aequilate

spline

17Kg



EP-LF205




(HP) Input

description

Weight

(N.W)

LF205 1:1.92 23/12 5.0 30 540 rpm

1 3/8 Z6

Cone base aequilate

spline

17Kg



EP-RC30-193



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

RC30-193 1:1.93 15/29 4.0 30 540 rpm 24.5Kg



EP-RC31




(HP) Input

description

Weight

(N.W)

RC31-193 1:1.93 15/29 4.0 30

RC31-147 1:1.47 15/22 5.08 40

540 rpm

1 3/8 Z6

Cone base aequilate

spline

24.5Kg



EP-RC33



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

RC33-193 1:1.93 15/29 4.0 30

RC33-147 1:1.47 15/22 5.08 40

540 rpm

1 3/8 Z6

Cone base aequilate

spline

25.5Kg



EP-RC61




(HP) Input

description

Weight

(N.W)

RC61-192 1:1.92 14/27 5.5

RC61-147 1:1.47 13/19 7.0

60 540 rpm

1 3/8 Z6

Cone base aequilate

spline

37Kg



EP-2070



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

2070 1:1 20/20 6.35 45 540 rpm

1 3/8 Z6

Optic axis



EP-756



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

EP-756 1:1 17/17 6.35 540 rpm

1 3/8 Z6

1 3/8 Z6



EP-BD9SP-V




(HP) Input

description

Weight

(N.W)

BD9SP-V 1:1 18/18 5.5 30 540 rpm

1 3/8 Z6

Optic axis



EP-3980



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

EP-3980 1:1 22/22 6.0 80 540 rpm

1 3/8 Z6

Optic axis

18Kg



EP-B003005R




(HP) Input

description

Weight

(N.W)

B003005R 1:1 19/19 4.23 25 540 rpm

Optic axis

Optic axis



EP-AG135


Power

(HP)

Rated

Input

AG135 1:1 20/20 6.0 540 rpm

Input/output

description

1 3/8 Z6

1 3/8 Z6


Weight

(N.W)



EP-3941



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

EP-3941 1:1 26/26 4.0 30 540 rpm

Optic axis

Optic axis

26Kg



EP-L15



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

EP-L15 1:2.78 25/9 4.0 30 540 rpm

1 3/8 Z6

Optic axis



EP-B003012R




(HP) Input

description

Weight

(N.W)

B003012R 1:1 17/17 6.35 35 540 rpm

Optic axis

Optic axis



EP-B003010



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

B003010 1:1 17/17 6.35 35 540 rpm

Optic axis

Optic axis



EP-1018



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

101821 2:1 20/10 4.0 10 540 rpm

Φ 25 Optic axis

Φ 25 Optic axis

4.0Kg



EP-01-675




(HP) Input

description

Weight

(N.W)

01675

01674

1.46:1 19/13 5.0 23 540 rpm

1 3/8 Z6

S 36

1 3/8 Z6

S 30



EP-L-25A



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

L-25A 1:1 16/16 4.5 15 540 rpm

Φ 25 Optic axis

Φ 25 Optic axis

4.5Kg



EP-281.11599




(HP) Input

description

Weight

(N.W)

281.11599 1.9:1 21/11 4.5 18 540 rpm Φ 35 Optic axis 7.6Kg



EP-614397209



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

614397209 1:1.46 19/13 5.0 18 540 rpm

1 1/4 Z19

1 3/8 Z6

7.6Kg



EP-BA802A-JS




(HP) Input

description

Weight

(N.W)

BA802A-

JS

1:1 15/15 4.5 18 540 rpm

1 3/8 Z6

Φ25 Optic axis

7.6Kg



EP-T281-A-L




(HP) Input

description

Weight

(N.W)

T281-A-L 1:1.46 19/13 5.0 18 540 rpm

1 3/8 Z6

1 3/8 Z6

6.5Kg



EP-TD106


Power

(HP)

Rated

Input

Input/output


description

Weight

(N.W)

TD106 1:1 16/16 4.5 15 540 rpm

1 3/8 Z6

1 3/8 Z6 / Φ25 Optic axis

4.5Kg



EP-MR012-4XJL



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

MR012-

4XJL

1:1 15/15 4.5 18 540 rpm

1 3/8 Z6

Φ25 Optic axis



EP-AM135-500LWB


101821

Power

(HP)

1:1.35 23/17 3.5 15

Rated Input/output

Input

description

540 rpm

1 3/8 Z6

Φ25 Optic axis


1:1 15/15 4.5 18

Weight

(N.W)

13Kg



EP-BG8.SP2




(HP) Input

description

Weight

(N.W)

BG8.SP2 1:1 14/14 6.35 45 540 rpm

1 3/8 Z6

1 3/8 Z6



EP-BGB9V3


Power

(HP)

Rated

Input

BGB9V3 1:1 16/16 6.35 45 540 rpm

Input/output

description

1 3/8 Z6

1 3/8 Z6


Weight

(N.W)

70Kg



EP-U1914-1


U1914-1

Power

(HP)

1:1.35 23/17 3.5 15

Rated Input/output

Input

description

540 rpm

1 3/8 Z6

Φ25 Optic axis


1:1 15/15 4.5 18

Weight

(N.W)

15Kg



EP-01-672




(HP) Input description

Weight

(N.W)

01-672 1.46:1 15/22 5.65

01-704 1.92:1 12/23 5.5

40

540 rpm

1 3/8 Z6

38.6X38.6

20.5Kg



EP-9.279



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

9.279 1:1.5 27/18 5.7 90 540 rpm

1 3/8 Z6

1 3/8 Z6

38Kg



EP-9.259



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

9.259 1.46:1 13/19 5.0 23 540 rpm

1 3/8 Z6

36X36

15Kg



EP-B21501C



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

B21501C 1.92:1 29/15 5.0 45 540 rpm

1 3/8 Z6

1 3/8 Z6

30Kg



EP-BGB8-T11



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

BGB8-T11 1:1 14/14 6.35 35 540 rpm

1 3/8 Z6

1 3/8 Z6

BGB8-T21 2:1 30/15 3.0 30



EP-RC61T



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

RC61T-146 1:1.46 13/19

7.0 60 540 rpm

1 3/8 Z6

1 3/8 Z6

37Kg

RC61T-11 1:1 16/16



EP-BGB9





Weight

(N.W)

BGB9.011-

LL

BGB9.013-

LL

1:1 16/16 6.35 45

1 3/8 Z6

1 3/8 Z6

540 rpm

2:1 30/15 3.5 30 Optic axis



EP-RTM130


Power

(HP)

Rated

Input

RTM130 1:1.46 22/15 6 45 540 rpm

Input/output

description

1 3/8 Z6

Optic axis


Weight

(N.W)



EP-T100



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

T100 1:3 12/36 3.45 30 540 rpm

1 3/8 Z6

Optic axis

18Kg



EP-01-661





Weight

(N.W)

01-661 1:1.3

01-662 1.3:1

26/20 5.644 80

540 rpm 1 3/4 Z20 57.5Kg



EP-9.311.874.30



Power

(HP)

Rated

Input

Input/output

description

Weight

(N.W)

9.311.874.30 1:3 12/36 4.36 50 540 rpm

1 3/8 Z6

Φ33 Optic axis

20.5Kg


Model 650 & Model 1000

Post Hole Diggers



MODEL 650 POST HOLE DIGGER PARTS BREAKDOWN

DIGT650 Model 650 Post Hole Digger w/o Auger 1

1 DIGT002 Boom 1

2 DIGT002P Boom Pin 1

3 NA 5/32 in. x 1-1/2 in. Cotter Pin 2

4 LKLP044 7/16 in. Lynch Pin 1

5 DIGT003 "A" Frame 1

5A LKDP101 7/8 in. Pull Pin with Nut and Lockwasher 2

6 DIGT003P "A" Frame Pin 1

9 DIGT204 Gear Box Input Guard 1

10 DIGT201 Gear Box Assembly 1

10A DIGT202 Gear Box Bearing & Seal Kit 1

12 DIGT203 Gear Box Output Guard 1

13 PTOLD650 Model 650 Driveline with Plastic Shield 1

13A PPTOLD650G Guard Assembly 1

13B PTOLD650B Cross and Bearing Kit 2

13C PTOLD650Y Push Pin Yoke 1

13D PTOLD650I Implement End Yoke 1

13E NA 1/4" x 3/8" Pointed Set Screw 1

14 NA 5/16 in. x 2-1/2 in. Hex Cap Screw (Grade 5 Shear Bolt) 1

15 NA 5/16 in. Lockwasher 1

16 NA 5/16 in. NC Hex Nut 1

17 NA 1/2 in. NC x 3 in. Hex Cap Screw 2



20 AUGT006 6 in. Auger with Screw Point and Cutting Edges as required


AUGT109 9 in. Heavy Duty Auger with Screw Point and Cutting Edges as required

22 AUGT012 12 in Auger with Screw Point and Cutting Edges as required


NA- Common fasteners available through local hardware and farm stores.



ILLUSTRATION C

MODEL 650 DIGGER

PARTS DIAGRAM


See Illustration D for Cutting Edges

NOTE: Safety shields are shaded on

this diagram. NEVER operate

the digger with any shield missing.


MODEL 1000 POST HOLE DIGGER PARTS BREAKDOWN

DIGT1000 Model 1000 Post Hole Digger w/o Auger 1

1 LKLP044 7/16” Linch Pin 4

2 LKDP101 7/8” Pull Pin 2

3 NA Hex Nut 7/8”-14 UN 1

4 NA Lock Washer 22mm 2

5 NA Flat Washer 22mm 4

6 DIGT103 “A” Frame 1

7 LKTP102 “A” Frame Pin 1

9 PTOLD1000 Model 1000 Driveline w/ Plastic Shields 1

10 NA Hex Bolt 5/16 x 3/4" 3

11 NA Flat Washer 5/16 (optional) 3

12 NA Lock Nut 5/16 (welded on bracket) 3

13 DIGT110 Manual Canister 1

14 DIGT111 Rubber Gasket 1

15 DIGT112 Barrelhead 1

16 NA Hex Bolt M10x30 2

17 NA Lock Washer 10mm 4

18 NA Flat Washer 10mm 4

19 DIGT204 Gear Box Input Guard 1

20 DIGT102 Boom 1

21 DIGT201 Gear Box 1

22 DIGT002P Boom Pin 1

23 NA Cotter Pin 4x40 2

24 DIGT203 Gear Box Output Guard 1

25 NA Inner Hex Flat Screw M10x20 2

26 NA Hex Bolt ½”-13 UNC 2

27 NA Nylon Lock Nut ½”-13 UNC 2

28 NA Hex Bolt 3/8”-16 UNC 1

29 NA Nylon Lock Nut 3/8”16 UNC 1


AUGT009 9 in. Auger with Screw Point and Cutting Edges as required


AUGT012 12 in Auger with Screw Point and Cutting Edges as required


AUGT118 18 in Heavy Duty Auger as required

AUGT124 24 in Heavy Duty Auger as required


NA - Common fasteners available through local hardware and farm stores.


MODEL 1000 DIGGER

PARTS DIAGRAM



CUTTING EDGES AND POINT PARTS BREAKDOWN

REFERENCE

NUMBER

PART

NUMBER

DESCRIPTION

NUMBER

REQUIRED

1 AUGT206 6 in. Cutting Edge 2

2A AUGT309 9 in. Outer Cutting Edge 1

2B AUGT209 9 in. Inner Cutting Edge 1

3 AUGT312 12 in. Outer Cutting Edge 1

4 AUGT212 12 in. Inner Cutting Edge 1

5 AUGT101 Screw Point with 1-1/4 in. NC Threads 1

6 NA 3/8 in. NC x 1-1/4 Carriage Bolt 4



-- AUGT406 Heavy Duty Cutting Edge Pair depends on

auger size

NA- Common fasteners available through local hardware and farm stores


ILLUSTRATION D

NOTE: It is important to replace the self-sharpening point on the auger when it shows signs of excessive wear.

Generally, the digging life of the point will be greater than that of the inner cutting edge. The digging life of

the inner cutting edge will be greater than that of the outer cutting edge since it covers fewer inches of

digging circumference.










EP



GEARBOX FOR SNOW PLOW

EP29


Input Input power Output

Ratio

shaft

Weight

speed

Z1 Z2 M

i

torque

r.p.m HP KW

Kg

ds Nm

1:1 540 16 16 4.5


EP



EP



收获机械齿轮箱 Harvest Machinery Gearbox

增扭中间盘总成 Intermediate Pulley Assembly

图号 /CODE S-38036

输入功率 /Input Power

200HP

输入转速 /Input Speed

2200rpm

重量 /Weight

85Kg

图号 /CODE

XD2-31005A




重量 /Weight

125HP

2200rpm

50Kg



剥皮机箱 Corn Barker Gearbox

图号 /CODE

EPN30.100Z.02W


20-30HP


419rpm

传动比 /Ratio(i) 1:1

重量 /Weight

45Kg

粉碎机箱 Corn Stalk Shredder Gearbox

图号 /CODE

EPN30.132Z.04W




50HP

1360rpm

传动比 /Ratio 1:1.32

重量 /Weight

28.5Kg



十字箱 Cross Shaft Gearbox

图号 /CODE

AH133092-P


60HP


1000rpm

传动比 /Ratio 1.5:1

重量 /Weight

34Kg

图号 /CODE

AH133093-1P




60HP

1000rpm

传动比 /Ratio 1.5:1

重量 /Weight

34Kg



分动箱 Transfer Gear Case

图号 /CODE

小分动箱系列



传动比 /Ratio 1:1/1.40:1/1.79:1

重量 /Weight

图号 /CODE

大分动箱系列




传动比 /Ratio 1.06:1/1.42:1/1.44:1/1.50:1/1.66:1

重量 /Weight


GEARBOX FOR TMR MIXER

ITEM Ratio

no.

Power Output Torque Input weigh(Kg)

KW

(Nm)

speed(r.p.m)

E1 14.60 61.97 16000 540 256

E2 18.20 46.61 15000 540 256

E3 28.27 59.27 16000 1000 290

E4 16.13 55.04 15700 540 256

E5 18.20 41.95 13500 540 256

E6 21.10 32.16 12010 540 256

E7 13.40 76.05 18020 540 280

E8 28.27 61.12 16500 1000 330

E9 25.89 72.89 18020 1000 290

E10 13.40 67.52 16000 540 256

E11 25.89 34.95 16000 540 290

E12 13.40 67.52 16000 540 256

E13 18.20 41.95 13500 540 256

E14 21.10 32.16 12000 540 256

E15 25.80 73.14 18020 1000 290

E16 13.38 76.16 18020 540 256




ITEM NO. E3




ITEM NO. E4 E5 E6 E7 E10 E12




ITEM NO. E8 E9 E11



GEARBOX FOR TMR MIXER or Biogas Plant Mixer

EPG06

额定输出扭矩

CONTINUOUS

TORQUE(Nm)


最大输出扭矩传动比最大输入转速

MAX. TRANSMISSION MAX. INPUT

TORQUE(Nm) RATIO SPEED(rpm)

PTO 连接方式

PTO SHAFTS

25,000 50,000

8.2/9.6/15/17.7

/29.2/34.3

1,000

single/double 1"3/4

z20

30,000 68,000

8.2/9.6/15/17.7

/29.2/34.3

1,000

single/double 1"3/4

z20


GEARBOX FOR TMR MIXER or Biogas Plant Mixer

EPG01

额定输出扭矩

CONTINUOUS

TORQUE(Nm)

最大输出扭矩 MAX.

TORQUE(Nm)

传动比

最大输入转速 MAX.

TRANSMISSION

INPUT SPEED(rpm)

RATIO


PTO 连接方式

PTO SHAFTS

18,000 30,000 6 - 90.46 1,000

single/double

1"3/4 z20

22,000 36,000 6 - 90.46 1,000

single/double

1"3/4 z20



EPG05

额定输出扭矩

CONTINUOUS

TORQUE(Nm)



TORQUE(Nm)

传动比

输入转速 INPUT

TRANSMISSION

SPEED(rpm)

RATIO

10.22/11.02/11.14/1

2.32/13.90/16.10/19

PTO 连接方式

PTO SHAFTS

12,000 30,000 .41/36.35/39.19/39. 540 1" 3/4 z20

61/43.81/49.41/57.2

4/69.00



EPG08


额定输出扭矩

CONTINUOUS

TORQUE(Nm)


TORQUE(Nm)

传动比

TRANSMISSION

RATIO

输入转速 INPUT

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

5,000 9,000 13.76 540 1" 3/8 z6



EPG03

额定输出扭矩

CONTINUOUS

TORQUE(Nm)


最大输出扭矩

MAX.

TORQUE(Nm)

传动比 TRANSMISSION 输入转速 INPUT

RATIO

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

30,000 50,000

16.70/21.70

Ⅰ

/24.86/32.31

Ⅱ 1:3.68

540 1" 3/8 z6



EPG02


额定输出扭矩

CONTINUOUS

TORQUE(Nm)


TORQUE(Nm)

传动比 TRANSMISSION

RATIO

输入转速 INPUT

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

Ⅰ 1:1

1,500 2,500

0 0

1.4/1.5

Ⅱ

/1.8/1.9/2.4

1,000

1"3/4 z20 & 1"

3/8 z6



EPG07

额定输出扭矩

CONTINUOUS

TORQUE(Nm)



传动比 TRANSMISSION 输入转速 INPUT

TORQUE(Nm)

RATIO

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

3,000 5,000

1.28/1.5

Ⅰ

/1.8/3.2

0 0

Ⅱ 1:1

1,000 1"3/4 z20


GEARBOX FOR Pasture blowing machine

EPG04


额定输出扭矩

CONTINUOUS

TORQUE(Nm)


TORQUE(Nm)

传动比 TRANSMISSION

RATIO

输入转速 INPUT

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

Ⅰ 1:1

1,500 2,500

0 0

Ⅱ 1.85/1.98

540 1" 3/8 z6


GEARBOX FOR Hay baling baler

EPG100


功率

POWER(HP)

传动比

TRANSMISSION

RATIO

额定输出扭矩

CONTINUOUS

TORQUE(Nm)


TORQUE(Nm)

输入转速 INPUT

SPEED(rpm)

50

I 6.87:1/5.83:1 3,600 7,000

II 1.15:1 600 1,100

540



EPG15

搅拌机容积

MIXER

CAPACITY(m3)

额定输出扭矩

CONTINUOUS

TORQUE(Nm)

最大输出扭矩 MAX. 传动比 TRANSMISSION

TORQUE(Nm)

RATIO



INPUT SPEED(rpm)

1-1.5 18,000 27,000 23.5:1 1,000



EPG30

搅拌机容积

MIXER

CAPACITY(m3)


额定输出扭矩

最大输出扭矩 MAX. 传动比 TRANSMISSION

CONTINUOUS

TORQUE(Nm)

RATIO

TORQUE(Nm)


INPUT SPEED(rpm)

2-3 40,000 54,000 27:1 1,000



EPG26

功率

POWER(HP)

额定输出扭矩

CONTINUOUS

最大输出扭矩传动比

MAX. TRANSMISSION


TORQUE(Nm) TORQUE(Nm) RATIO

输入转速 INPUT

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

26 2,600 4,500 7.75:1 540 1" 3/8 z6



EPG75


功率

POWER(HP)

额定输出扭矩

CONTINUOUS

TORQUE(Nm)

最大输出扭矩

MAX.

TORQUE(Nm)

传动比

TRANSMISSION

RATIO

输入转速 INPUT

SPEED(rpm)

PTO 连接方式

PTO SHAFTS

75 10,500 15,000 10.8:1 540 1" 3/8 z6



S 系列机械驱动前桥总成 S Series Mechanical Drive Front Axle Assembly

图号 /CODE 8-12 吨收获机械前桥总成 ( 带后驱 )


850~2050rpm

扭矩容量 /Torque

800Nm

发动机最大功率 /Max Engine Power

150HP

速比 /Gear Ratio Ⅰ 档 :29.3、Ⅱ 档 :14.62、Ⅲ 档 :7.29、Ⅳ 档 :3.64、倒档 :12.93

末级传动速比 /Final Drive Ratio 7.73

无极变速传动比 /Varible Speed Drive

Ratio


0.7-1.26

外形尺寸 /Outline

Dimension

重量 /Weight

变速箱

末端

变速箱

末端

1280х700х460mm

520х500х450mm

340Kg

162Kg




图号 /CODE 8-12 吨收获机械前桥总成 ( 发动机双端动力输出 , 可选配带后驱 )


850~2050rpm


800Nm


150HP





Ratio

变速箱

0.7-1.26

1280х700х460mm


Dimension

重量 /Weight

末端

变速箱

末端

450х460х410mm

340Kg

145Kg




图号 /CODE 12-15 吨收获机械前桥总成 ( 可选配带后驱 )


850~2050rpm


800Nm


210HP





Ratio

变速箱

0.7-1.26

1280х700х460mm


Dimension

重量 /Weight

末端

变速箱

末端

520х500х450mm

340Kg

210Kg



3YZ 系列机械驱动前桥总成 3YZ Series Mechanical Drive Front Axle Assembly

图号 /CODE 6-8 吨收获机械前桥总成 ( 机械制动 , 不带无极增扭 , 可选配带后驱 )


850~2200rpm


520Nm


120HP

速比 /Gear Ratio Ⅰ 档 :24.92、Ⅱ 档 :11.07、Ⅲ 档 :4.33、倒档 :7.9



Ratio



Dimension

重量 /Weight

变速箱

末端

变速箱

末端

730х620х410mm

380х400х410mm

260Kg

120Kg




图号 /CODE 6-8 吨收获机械前桥总成 ( 机械制动 , 可选配带后驱 )


850~2200rpm


520Nm


120HP





Ratio

变速箱

0.7-1.26

1120х620х410mm


Dimension

重量 /Weight

末端

变速箱

末端

380х400х410mm

280Kg

120Kg




图号 /CODE 6-8 吨收获机械前桥总成 ( 液压制动 , 可选配带后驱 )


850~2200rpm


520Nm


120HP




Ratio


0.7-1.26


Dimension

重量 /Weight

变速箱

末端

变速箱

末端

1120х620х410mm

380х400х410mm

280Kg

120Kg



液压驱动前桥总成 Hydraulic Drive Front Axle Assembly

图号 /CODE

6-8 吨收获机械前桥总成


850~2200rpm


120HP

速比 /Gear Ratio Ⅰ 档 :24.92、Ⅱ 档 :11.07、Ⅲ 档 :4.33




Dimension

重量 /Weight

变速箱

末端

变速箱

末端

850х620х410mm

380х400х410mm

280Kg

120Kg




图号 /CODE

8-12 吨收获机械前桥总成


850~2200rpm


150HP

速比 /Gear Ratio Ⅰ 档 :29.3、Ⅱ 档 :14.62、Ⅲ 档 :7.29、Ⅳ 档 :3.64




变速箱

900х700х460mm

Dimension

重量 /Weight

末端

变速箱

末端

520х500х450mm

200Kg

162Kg




图号 /CODE 12-15 吨收获机械前桥总成 ( 三档 )


850~2200rpm


210HP

速比 /Gear Ratio Ⅰ 档 12.15、Ⅱ 档 :10.03、Ⅲ 档 :3.35




Dimension

重量 /Weight

变速箱

末端

变速箱

末端

900х700х460mm

530х510х450mm

200Kg

210Kg




图号 /CODE 12-15 吨收获机械前桥总成 ( 四档 )


850~2200rpm


210HP

速比 /Gear Ratio Ⅰ 档 :29.3、Ⅱ 档 :14.62、Ⅲ 档 :7.29、Ⅳ 档 :3.64




Dimension

重量 /Weight

变速箱

末端

变速箱

末端

900х700х460mm

530х510х450mm

200Kg

210Kg



XD2 系列机械驱动前桥总成 XD2 Series Mechanical Drive Front Axle Assembly

图号 /CODE 5-6 吨收获机械前桥总成 ( 二驱 )


850~2200rpm


450Nm


125HP





Ratio

0.7-1.26


Dimension

重量 /Weight

变速箱

末端

变速箱

末端

750х600х450mm

380х400х410mm

160Kg

120Kg



XD2 系列机械驱动前桥总成 XD2 Series Mechanical Drive Front Axle Assembly

图号 /CODE 5-6 吨收获机械前桥总成 ( 四驱 )


850~2200rpm


450Nm


125HP




0.7-1.26

Ratio



Dimension

重量 /Weight

变速箱

末端

变速箱

末端

750х600х450mm

380х400х410mm

160Kg

120Kg



液压驱动轮边减速箱 Hydraulic Drive Hub Reduction Gearbox

图号 /CODE

S03 系列


210HP


减速比 18.60

重量 /Weight

310Kg


Spare parts:

EP6001 EP6002 EP6003 EP6004

No. Description Quantity No. Description Quantity

1 Nut M6 8 15 Spring ring 1

2 Cover 1 16 Spring 1

3 Sealing ring φ35×52×7 1 17 Ring 1

4 Bearing type 6007 2 18 Snap ring 48 1

5 Bearing type 6010 2 19 Pinion gear 1

6 Peg 6×12 2 20 Ring gear 1

7 Gasket 1 21 Cap DIN 470 φ27 1

8 Snap ring dia.50 2 22 Sealing ring φ50×65×8 1

9 Key 12×8 1 23 Oil filling cap 3/8” 1

10 Female 1 3/8” DIN 9611 short 1 24 Gasket 3

11 Female 1 3/8” DIN 9611 1 25 Housing 1

12 Male 1 3/8” DIN 9611 1 26 Oil drain plug 3/8” 1

13 Female 1 3/8” DIN 9611 + tightening 1 27 Oil level plug 3/8” 1

14 Ball 3 28 Socket capscrew M6×50 8


Technical sheet:

Input torque

(Nm)

Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

178 119 540 1.5 810 10 5.8

152 76 540 2 1080 10 5.8

165 66 540 2.5 1350 10 5.8

180 55 540 3 1680 10 5.8

186 58 540 3.5 1836 10 5.8

159 42 540 3.8 2052 10 5.8


Weight

(Kg)

Three views:

P.T.O.

Mounting positions

1 2 3 4 A B C

How to order:


For example: EP6001-1AS


Spare parts:

EP6101H0 EP6105P1 EP6106H0


1 Nut M6 8 14 Spring 1

2 Cover 1 15 Snap ring 1

3 Peg 6×12 2 16 Ring 1

4 Cap DIN 470 φ37 2 17 Spring ring 1

5 Snap ring dia.50 2 18 Oil level plug 3/8” 1

6 Ring gear 2 19 Gasket 3

7 Shaft 1 20 Oil filling cap 3/8” 1

8 Bearing type 6010 2 21 Cap DIN 470 φ27 1

9 Sealing ring φ50×65×8 1 22 Key 12×8 1

10 Housing 1 23 Pinion gear 1

11 Oil drain plug 3/8” 1 24 Bearing type 6007 2

12 Socket cap screw M6×50 6 25 Sealing ring φ35×52×7 1

13 Ball 3 26 Gasket 1

Technical sheet:

Input torque

(Nm)


Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

178 119 540 1.5 810 10 5.8

152 76 540 2 1080 10 5.8

165 66 540 2.5 1350 10 5.8

180 55 540 3 1680 10 5.8

186 58 540 3.5 1836 10 5.8

159 42 540 3.8 2052 10 5.8

Weight

(Kg)


Three views:

Input shaft

Mounting positions

1 2 3 4

A

5 6

Output shaft


B

P0 P1 P2

H0 S0 C


How to order:

For example: EP6101P0-1A

Remark : We accept non-standard customization , if you have other different shafts , please contact

us .



Spare parts:

EP7001 EP7002 EP7003 EP7004


1 Nut M8 8 15 Sealing ring φ50×65×8 1

2 Cover 1 16 Housing 1

3 Sealing ring φ45×65×8 1 17 Gasket 4

4 Bearing type 6009 2 18 Oil drain plug 3/8” 2

5 Bearing type 6010 2 19 Socket cap screw M8×35 8

6 Peg 6×12 2 20 Oil level plug 3/8” 1

7 Gasket 1 21 Oil filling cap 3/8” 1

8 Cap DIN 470 φ37 1 22 Pinion gear 1

9 Snap ring dia.50 2 23 Snap ring UNI 7435-50 1

10 Female 1 3/8” DIN 9611 short 1 24 Ring 1

11 Female 1 3/8” DIN 9611 long 1 25 Spring 1

12 Key 12×25 1 26 Spring ring 1

13 Male 1 3/8” DIN 9611 1 27 Female 1 3/8” DIN 9611 + tightening 1

14 Ring gear 1 28 Ball 3


Technical sheet:

Input torque

(Nm)

Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

380 260 540 1.5 810 20 8.3

430 210 540 2 1080 20 8.3

460 180 540 2.5 1350 20 8.3

490 160 540 3 1620 20 8.3

460 130 540 3.5 1836 20 8.3

437 115 540 3.8 2052 20 8.3

Weight

(Kg)


Three views:

P.T.O.

Mounting positions

A

C

1 2 3 4

How to order:


B

D

For example: EP7001-1AT


Spare parts:

EP7105 EP7106 EP7107 EP7108


1 Nut M8 6 15 Gasket 4

2 Cover 1 16 Oil drain plug 3/8” 2

3 Sealing ring φ45×65×8 1 17 Socket cap screw M8×35 6

4 Bearing type 6009 2 18 Oil level plug 3/8” 1

5 Bearing type 6010 2 19 Oil filling cap 3/8” 1

6 Peg 6×12 2 20 Cap DIN 470 φ37 1

7 Gasket 1 21 Pinion gear 1

8 Male/male 1 3/8” DIN 9611 1 22 Snap ring UNI 7435-50 1

9 Female/female 1 3/8” DIN 9611 1 23 Ring 1

10 Female/male 1 3/8” DIN 9611 1 24 Spring 1

11 Snap ring dia.50 1 25 Spring ring 1

12 Ring gear 1 26 Ball 3

13 Sealing ring φ50×65×8 1 27 Female/male 1 3/8” DIN 9611 + tightening 1

14 Housing 1 28 Key 12×25 1

Technical sheet:

Input torque

(Nm)


Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

380 260 540 1.5 810 20 9.7

430 210 540 2 1080 20 9.7

460 180 540 2.5 1350 20 9.7

490 160 540 3 1620 20 9.7

460 130 540 3.5 1836 20 9.7

437 115 540 3.8 2052 20 9.7

Weight

(Kg)


Three views:

P.T.O.

Mounting positions

A

5 6

B


C

7 8

D


How to order:




Spare parts:

EP7109 EP71011 EP71024


1 Nut M8 6 12 Sealing ring φ50×65×8 1

2 Cover 1 13 Housing 1


4 Bearing type 6009 2 15 Oil drain plug 3/8” 2

5 Bearing type 6010 2 16 Socket cap screw M8×35 6

6 Peg 6×12 2 17 Oil level plug 3/8” 1

7 Gasket 1 18 Oil filling cap 3/8” 1

8 Female/female 1 3/8” DIN 9611 short 1 19 Cap DIN 470 φ37 1

9 Female/male 1 3/8” DIN 9611 short 1 20 Pinion gear 1

10 Snap ring dia.50 1 21 Key 12×25 1

11 Ring gear 1 22 Male 50×45 Z24 DIN 5482 + male 1 3/8” DIN 9611 1

Technical sheet:

Input torque

(Nm)


Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

380 260 540 1.5 810 20 9.7

430 210 540 2 1080 20 9.7

460 180 540 2.5 1350 20 9.7

490 160 540 3 1620 20 9.7

460 130 540 3.5 1836 20 9.7

437 115 540 3.8 2052 20 9.7

Weight

(Kg)


Three views:

P.T.O.

Mounting positions

9 11 B


A

C

24

D


How to order:




Spare parts:

EPT7001 EPT7002 EPT7003 EPT7004


1 Nut M8 8 15 Socket cap screw M8×35 8

2 Cover 1 16 Oil level plug 3/8” 1



5 Peg 6×12 2 19 Cap DIN 470 φ37 1

6 Gasket 1 20 Ring gear 1

7 Female 1 3/8” DIN 9611 short 1 21 Pinion gear 1

8 Female 1 3/8” DIN 9611 long 1 22 Snap ring UNI 7435-50 1

9 Snap ring dia.50 2 23 Ring 1

10 Male 1 3/8” DIN 9611 1 24 Spring 1

11 Bearing type 6010 2 25 Spring ring 1

12 Sealing ring φ50×65×8 1 26 Female 1 3/8” DIN 9611 + tightening 1

13 Housing 1 27 Ball 3

14 Oil drain plug 3/8” 2 28 Cap din 1

Technical sheet:

Input torque

(Nm)


Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

660 440 540 1.5 810 37 16

660 330 540 2 1080 37 16

660 264 540 2.5 1350 37 16

660 220 540 3 1620 37 16

660 180 540 3.5 1836 37 16

660 166 540 3.8 2052 37 16

Weight

(Kg)


Three views:

P.T.O.

Mounting positions

A

C

1 2 3 4

How to order:


B

D

For example: EPT7001-1AT


Spare parts:

EPT7201 EPT7202 EPT7203 EPT7204


1 Nut M8 6 15 Socket cap screw M8 8




5 Peg 6×12 2 19 Cap DIN 470 φ37 1

6 Gasket 1 20 Ring gear 1

7 Female 1 3/8” DIN 9611 short 1 21 Pinion gear 1

8 Female 1 3/8” DIN 9611 long 1 22 Snap ring UNI 7435-50 1

9 Snap ring dia.50 2 23 Ring 1

10 Male 1 3/8” DIN 9611 1 24 Spring 1

11 Bearing type 6010 2 25 Spring ring 1

12 Sealing ring φ50×65×8 1 26 Female 1 3/8” DIN 9611 + tightening 1

13 Housing 1 27 Ball 3

14 Oil drain plug 3/8” 2 28 Cap din 1

Technical sheet:

Input torque

(Nm)


Output torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

660 440 540 1.5 810 37 16

660 330 540 2 1080 37 16

660 264 540 2.5 1350 37 16

660 220 540 3 1620 37 16

660 180 540 3.5 1836 37 16

660 166 540 3.8 2052 37 16

Weight

(Kg)


Three views:

P.T.O.

Mounting positions

A

C

1 2 3 4

How to order:


B

D

For example: EPT7201-1AT


60100 96101


SAE A Gr.2

SAE B Gr.3

Code 60100 96101

G 12 12

H 32 25


Spare parts:

EPR60016


1 Screw M8×20 4 12 Gasket 3




5 Gasket 1 16 Bearing type 6009 2

6 Hollow shaft φ35 1 17 Pinion gear 1

7 Snap ring φ50 2 18 Key 12×8 1

8 Ring gear 1 19 Peg 6×12 2

9 Sealing ring φ50×65×8 2 20 Sealing ring φ45×65×8 1

10 Housing 1 21 Flange 1

11 Oil drain plug 3/8” 1


Technical sheet:

Output torque

(Nm)

Input torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

196 130 300 1.5 200 10 6

176 88 400 2 200 10 6

192 77 500 2.5 200 10 6

200 67 600 3 200 10 6

214 63 700 3.5 200 10 6

186 49 760 3.8 200 10 6

Weight

(Kg)


Three views:

Shaft

Mounting positions


A

B

A


How to order:

For example: EPR60016-1AS



Spare parts:

KR70016



2 Screw M8×20 4 13 Oil level plug 3/8” 1

3 Cover 1 14 Gasket 4

4 Sealing ring φ50×65×8 2 15 Oil filling cap 3/8” 1

5 Gasket 1 16 Cap din 470 φ37 1

6 Hollow shaft φ35 1 17 Pinion gear 1

7 Snap ring φ50 2 18 Key 12×25 1

8 Ring gear 1 19 Peg 6×12 2

9 Bearing type 6010 2 20 Bearing type 6009 2

10 Housing 1 21 Sealing ring φ45×65×8 1

11 Oil drain plug 3/8” 1 22 Flange 1


Technical sheet:

Output torque

(Nm)

Input torque

(Nm)

Input speed

(r/min)

Transmission ratio

Output speed

(r/min)

Power

(Kw)

480 320 300 1.5 200 20 8.7

485 240 400 2 200 20 8.7

520 210 500 2.5 200 20 8.7

570 190 600 3 200 20 8.7

530 150 700 3.5 200 20 8.7

525 140 760 3.8 200 20 8.7

Weight

(Kg)


Three views:

Shaft

Mounting positions


A

B

C

D


How to order:

For example: EPR70016-1AT



95100 96100


Code 95100 96100

Application SAE A for 600 series gear box and Gr.2 SAE A for 700/710 series gear box and Gr.2


10005 10012 10014

10005 10012

35505


10014 35505

Code 10005 10012 10014 35505

Application For600 seriesgearboxandGr.2 For700/710 seriesgearboxand Gr.2 For 700/710seriesgearboxand Gr.3 For700/710 seriesgearboxand Gr.3


EPRS30901

Spare parts:



1 Electric clutch 1 6 Shaft 1

2 Housing 1 7 Gasket 1

3 Sealing ring 2 8 Flange for pump 1

4 Bearing 2 9 Socket cap screw 4

5 Snap ring 2 10 Woodruff key 1


Technical sheet:

Nominal torque 78Nm Connection time 25 m/sec

Static torque 125Nm Disconnection time 40 m/sec

85Nm At 500 rpm Minimum time

Dynamic torque


70Nm

At 1000 rpm

between two

20 sec

42Nm

At 1500 rpm

connection

35Nm

At 2000 rpm

27Nm At 2500 rpm Max. speed 5000 rpm

25Nm At 3000 rpm Weight 5.0 Kg

Type

Electric absorption

Resistance(Ω) Current(A) Power(W)

20℃ 120℃ 20℃ 120℃ 20℃ 120℃

KRS30901 12 V DC 4 5.6 3.33 2 40 24

KRS30903 24 V DC 20 28 1.26 0.77 30.3 18.18

All technical data at 20℃/at 120℃ the performance are less 20% , all electromagnetic clutches are reversible .


Technical sheet:

Nominal torque 118Nm Connection time 25 m/sec

Static torque 140Nm Disconnection time 40 m/sec

125Nm At 500 rpm Minimum time

110Nm

At 1000 rpm

between two

20 sec

Dynamic torque

82Nm

At 1500 rpm

connection

75Nm

At 2000 rpm

67Nm At 2500 rpm Max. speed 5000 rpm

65Nm At 3000 rpm Weight 5.6 Kg


Type

Electric absorption

Resistance(Ω) Current(A) Power(W)

20℃ 120℃ 20℃ 120℃ 20℃ 120℃

KRS30929 12 V DC 4 5.6 3.33 2 40 24

KRS30930 24 V DC 20 28 1.26 0.77 30.3 18.18

All technical data at 20℃/at 120℃ the performance are less 20% , all electromagnetic clutches are reversible .


Spare parts:

25402 25602 25403 25603


1 Housing 1 7 End cover 1

2 Sealing ring 2 8 O-ring 1


3 Snap ring 2 9 Woodruff key 1

4 Flat key shaft 1 10 Taper shaft 1

5 Bearing 2 11 Flat key 1

6 O-ring 1


25402

25602


25602-1


25602-2

25403


25603


EPA1-038 EPA2-012 EPA3-100

EPA1-038

EAP2-012

10014

EPA1-012

EPA2-034


EPA3-034

EPA3-100


















































































•

•

•

DANGER

Rotating Driveline

CONTACT CAN CAUSE DEATH

KEEP AWAY !

DO NOT OPERATE WITHOUT-

ALL DRIVELINE GUARDS,TRACTOR

AND EQUIPMENT SHIELDS IN PLACE

DRIVELINES SECURELY

ATTACHED AT BOTH ENDS

DRIVELINE GUARDS THAT TURN

FREELY ON DRIVELINE


EVER-POWER

DRIVESHAFT

User's Manual








Hydrualic Truckbed Bale Spear

The AgKNX Truckbed Bale Spear is designed to transport hay bales and withstand the rigors of

the job and weather. It mounts to a 2-5/16” gooseneck ball with an adjustable frame that can be

used with recessed or protruding balls. We also have an optional bracket that can be used instead

of a gooseneck ball (requires drilling into bed / frame).

Features:

• 12V Power Unit w/ Remote

• Wide range of motion

• Durable, reinforced construction

• Easily adjustable

• Weather and damage resistant

housing for power unit

• Large bore cylinder provides high

force

Power Unit

Hydraulic Tank

Cylinder

Control

Spears

Power

SKU

Double Acting w/ Flow Control

5 Liter

3” Bore x 16” Stroke

Remote w/ 15’ Cable

48” Length

12 V, 20 Cables w/ Power Connector


BLSP-HGSN-ASM

Use with 2-5/16” gooseneck ball

that is recessed or not!

Or, mount without a gooseneck ball

using our bracket.


Skid Steer Mount Frames

Our two varieties of skid steer mount plates cover a wide range of applications and options.

Open Frame Mount

DIGS110ASM

(See Skid Steer Digger Page)

SKST001

Skid Steer Mount Blank

Universal skid steer mount plate.

Unfinished, ready for welding or fabrication.

8mm uniform steel plate.

Simple, rugged design.


Type

Weight

(lbs)

SKU

Open Frame Mount 107 DIGS110ASM

Blank Plate 77 SKST001


Skid Steer Earth Augers

Auger Drives

• Hydraulic motor mated to planetary gearbox

• Class leading torques

• Fully cast casing

• 2” hex drive

Skid Steer Auger System

• Universal Skid Steer Mount

• 2 axis swivel with grease zerks keeps

auger vertical

•

Mini Loader Auger System

(not shown)

• Mini Skid Steer Mounting Plate

•

Application

Mini Skid Steer

Full Size Skid Steer

Model HP21 HP27 HP41 HP49

Max Torque 1500 ft-lb 2730 ft-lb 4080 ft-lb 4860 ft-lb


Max Flow 23 gpm 23 gpm 23 gpm 23 gpm

Max Pressure 4000 psi 4000 psi 4000 psi 4000 psi

Max Speed 153 RPM 110 RPM 71 RPM 55 RPM

Dirt/Earth

Hard Earth/Rock

Rock/Extreme


AUGER DRIVERS DRAWING



Hex Drive Auger Bits

Rock auger

with carbide

bullet teeth

Earth auger

with

fishtail tip

All Augers come with 2” hexagonal drive collars.

Type Size SKU

Rock Augers

6” AUGS106

Extra Heavy Duty

9” AUGS109

• 10mm sectional flighting

12” AUGS112

• 3.5” OD Tube

15” AUGS115

• Carbide bullet teeth

18” AUGS118

• 4 tooth rock pilot tip

Earth Augers

6” AUGS006

Heavy Duty

9” AUGS009

• 6mm sectional flighting

12” AUGS012

• 2.37” OD Tube

15” AUGS015

• Pound in teeth

18” AUGS018

• Fishtail pilot tip

Dirt Augers

• 3.5mm flighting

6” AUGSL06

• 2.37” OD Tube

9” AUGSL09

• Bolt on teeth

12” AUGSL12

• Spiral pilot tip

40/50 Teeth AUGS4050

35C Teeth

C35 Teeth

C21 Bullet Teeth

C21H Bullet Teeth

AUGS35C

AUGSC35

AUGSC21

AUGSC21H

Rock Auger Pilot w/ Bullet teeth 4 tooth AUGS4TRP

Fishtail Pilot Tip

Auger Extention - Hex Drive

48”

60”

AUGSFTTS

AUGS48E

AUGS60E

35C &

C35 Teeth

40/50

Teeth

C21H Bullet

Teeth

Dirt auger

C21 Bullet

Teeth


Fishtail Pilot

Rock Auger Pilot


3-Point Quick Hitches

AgKNX quick hitches are built to ASAE standards. Mounting pins and adapter bushings (if

applicable) are included. We offer a full line of proven quality hitches.

Dimensions are in inches.

Category 3

Category 2

Category 2 Category 1

Heavy Duty

Category Max HP Width (W)

Lower Hook to Lower to Upper

Hook (L) (lbs)

Weight

Top Link (H)

SKU

I 50 27.25 18.5 15-18.5 80 QHT001

II 100 32.75 21.5 15 139 QHT002

II HD 150 32.5 21.5 15 165 QHT002HD

III 225 38.25 24.5 19 182 QHT003

III Narrow 225 32.5 24.5 19 176 QHT003N

II/III 225 38.25 24.5 19 185 QHT023

Lift Arm Bushings: Category I & II hitches come with a set of

lift arm bushings that mount on the implement draw pins

and fit in the lower hooks of the quick hitches. Bushing kits

are available separate from hitches.

Category Inner Diameter SKU

I 7/8” QHT101

II 1-1/8” QHT102



3-Point Trailer Mover & Bale Spear

This heavy duty, multi-purpose hitch can be used to move tongue mounted ball hitch trailers

and gooseneck trailers with your tractor. It can also move large hay bales by installing bale

spears in the existing sockets. Tow hooks add more functionality for rugged tasks. Usable with

a quick hitch.

2-5/16”

Gooseneck Ball

Tow Hooks

2” Hitch

Reciever

Bale Spear

Sockets

Works on Category 1 & 2

Quick Hitch or 3-Point Linkage

Weather hooking up directly to the tractor

linkage, or using with a quick hitch, our

design can be installed on a varity of

configurations. The pin has bushings to be

used with either 7/8” or 1.5” lift arms.


SKU: TRMV012B


3-Point Post Hole Diggers

Tractor mounted digger systems include a boom, A-frame, gear box, PTO driveline

with safety shields, manual canister, and all necessary pins and bolts. All models have an

adjustable boom/A-frame connection. Diggers come in individual crates, which can also fit

one auger up to 9” or 12” depending on the model and crate ordered.

Model 400

Model 400

Compact

Model 650

Standard Duty

Model 1000

Heavy Duty

Model 650

Model 1500

Extra Heavy Duty

Category 0 & 1 1 1 1 & 2

Boom Length 56” 60” 72” 72”

Tubing Diameter 2-7/8” 2-7/8” 2-7/8” 3-1/4”

Draw Pin Width 20” 27” 27” 32-1/2

Driveline Series 1 Series 1 Series 4 Series 4

Gearbox 2.9:1 2.9:1 2.9:1 3.18:1

Auger Diameters 6”, 9”, 12” (3’ length) 6”, 9”, 12” 6”, 9”, 12”, 18”, 24” 6”, 9”, 12”, 18”, 24”

Weight 150 lbs 160 lbs 200 lbs 235 lbs

SKU DIGT400 DIGT650 DIGT1000 DIGT1500

Features 4 Positions 3 Positions 4 Positions 4 Positions

Reinforcemed Boom Reinforced Boom

3/4” x 1” Toplink Ball 3/4” x 1” Toplink Ball

Cast Ears on Gearbox


Model 1500

Model 1000


Auger Bits & Parts for

3-point Diggers

18” 24”

AUGT009

9” STANDARD

Augers with Replaceable Tips and Cutting Edges

Auger Diameter Duty & Length Weight SKU

6” Compact - 36” 21 AUGT006C



6” Standard - 48” 23 AUGT006



6” Heavy - 48” 31 AUGT106

9” Heavy - 48” 42 AUGT109

12” Heavy - 48” 60 AUGT112

18” Heavy - 48” 99 AUGT118

24” Heavy - 48” 125 AUGT124

Replaceable Auger Parts

Size Duty Weight SKU

6” Cutting Edge - Packaged Set Standard 1.2 AUGT206



Cutting Edge Pair Heavy - All 1.5 AUGT406

Screw Point Standard 2.9 AUGT101

Spiral Point Heavy 7.5 AUGT102

Parts

PTO Drivelines: 1-3/8” QD x 1-1/4” Round Weight SKU

Model 650 Shaft: 1 Series, 52” Compressed 19 PTOLD650

Model 1000 Shaft: 4 Series, 53” Compressed 31 PTOLD1000

DIGT201

Standard duty 45 HP

gearbox


DIGT211

Heavy duty 75 HP

gearbox

Manual Canister 1 DIGTMC

Standard Duty Gearbox 55 DIGT201

Heavy Duty Gearbox 75 DIGT211

DIGTMC


PTO Drivelines

PTO Drivelines

The shortest length measurement is taken from the ends of yokes when fully compressed.

The extended length is an guideline based on maintaining at least 1/3 shaft length overlap.

Dimensions are in inches.

Series Shortest Extended Tractor End Implement End Common Uses SKU

Length Length

1 27 34 1-3/8” x 6 QD 1-3/8” x 6 QD Fertilizer Spreader PTOL0127

3 40 54 1-3/8” x 6 QD 1-3/8” x 6 QD Finishing Mower, Tiller PTOL0340

4 30 40 1-3/8” x 6 QD 1-3/8” Round Finishing Mower, Tiller PTOL0430

4 32 42 1-3/8” x 6 QD 1-3/8” Round Rotary Cutter PTOL0432

4 36 43 1-3/8” x 6 QD 1-3/8”x6 Clutch Rotary Cutter, Tiller PTOL0436

4 37 50 1-3/8” x 6 QD 1-3/8” Round Rotary Cutters, Pond PTOL0437

4 42 58 1-3/8” x 6 QD 1-3/8” Round Post Hole Digger PTOL0442

4 48 65 1-3/8” x 6 QD 1-3/8” x 6 QD Post Hole Digger PTOL0448


5 42 57 1-3/8” x 6 QD 1-3/8” Round Rotary Cutters PTOL0542

12 48 64 1-3/8” x 6 QD 1-1/4” Round Heavy Duty Digger PTOL1248


14 56 77 1-3/8” x 6 QD 1-3/8” Round 5’ & 6’ Pull Cutters PTOL1456


NOTE: Drivelines can easily be cut down to shorter lengths.


PTO Accessories

PTO Adapters increase or reduce size, extend the shaft, and/or adapt between spline styles.

PTO Clutches offer protection for PTO systems and equipment.

Unless otherwise specified, these are rated up to 75 Horsepower.

PTOE PTOS PTOQ PTOO PTOO3838Q PTOC

Description Female Male Extends* Weight SKU

(in) (lbs)

Reducer 1-3/8” x 6 1-1/8” x 6 3-5/16 1.4 PTOE3818

Increaser 1-1/8” x 6 1-3/8” x 6 3-5/8 1.3 PTOE1838

Extender 1-3/8” x 6 1-3/8” x 6 3-5/16 2.2 PTOE3838

Adapter 1-3/8”x21 1-3/8”x6 3-1/4 2.0 PTOE2138

Sleeve Increaser, 2” for Ford 1-1/8” x 6 1-3/8” x 6 0 0.1 PTOE1838F

Sleeve Increaser, 2.25” 1-1/8” x 6 1-3/8” x 6 0 0.1 PTOE1838S

Sleeve Increaser, Closed end 1-1/8” x 6 1-3/8” x 6 1/2 0.2 PTOE1838C

Extender for Gresen Pump 1-3/8” x 6 1-3/8” x 6 11-5/8 6.0 PTOE3838G

Spline Adapter, Screw Lock 1-3/4” x 20 1-3/8” x 21 4-5/8 4.2 PTOS2021

1-3/4” x 20 1-3/8” x 6 4-5/8 6.1 PTOS2006

Spline Adapter, Quick Release 1-3/8” x 21 1-3/8” x 6 3-7/8 2.5 PTOQ2106

1-3/8” x 6 1-3/8” x 21 4-1/8 2.5 PTOQ0621

Extender, Quick Release 1-3/8” x 6 1-3/8” x 6 4-3/8 2.8 PTOQ0606

1-3/8” x 21 1-3/8” x 21 4-1/8 3.2 PTOQ2121

Overrunning Clutch, Roll Pin 1-1/8” x 6 1-3/8” x 6 3-13/16 5.0 PTOO1838

1-3/8” x 6 1-3/8” x 6 3-13/16 5.0 PTOO3838

Overrunning Clutch, Quick Release 1-3/8” x 6 1-3/8” x 6 3-7/8 7.2 PTOO3838Q

Overrunning Clutch, QR, 100 HP 1-3/8” x 6 1-3/8” x 6 4-3/4 9.0 PTOO3838QH

Slip Clutch, Female Quick Release 1-3/8” x 6 1-3/8” x 6 5 20.1 PTOC3838

1-3/8” x 6 1-1/4” Round 5 20.1 PTOC38RH


*Extension length may vary for individual users


Linkage Parts

Forged Top Links

Category A B

C D D Weight SKU

Pin Hole Threads Body Open Closed (lbs)

0 5/8” 3/4” NC 9.5” 18” 13” 2.7 LKTL001

0 5/8” 3/4” NC 7.5” 16” 11” 2.5 LKTL002

I 3/4” 1-1/8” NC 16” 28” 21” 7.6 LKTL101

II 1” 1-1/8” NC 16” 31” 21” 10 LKTL201

II 1” 1-1/4” NC 16” 32” 23” 12 LKTL202

III 1-1/4” 1-3/8” NC 19.5” 37” 25.5” 20 LKTL301

Lift Arms

Category Description Pin Ball Center to Overall Weight SKU

Holes Center Distance Length (lbs)

I

Forged lift arm,

right or left side

7/8” 31-3/4” 34-1/2” 11.7 LKLA101

Top Link Bushings

Category Inner Outer Length SKU

Diameter Diameter

I 3/4” 1” 1-15/16” LKTB101

II 1” 1-1/4” 1-15/16” LKTB201


Lift Arm Bushings Fit over the draw pins and in the lift arm

Category Draw Pin Lift Arm Length SKU

Diameter Diameter

I 7/8” 1-1/8” 1-3/4” LKLA001

II 1-1/8 1-1/2” 1-3/4” LKLA002


Linkage Parts

LKTP102

LKDP728

Top Link Pins

Category Description

Usable Pin Overall Weight SKU

Length Diam. Length (lbs)

I Cat. 1 Pin (Ford 9N-560, Ferguson 195647M1) 2-3/4” 3/4” 4-1/2” 0.5 LKTP101

I Cat. 1 Long Pin (Ferguson 195589M1, AC339942) 3-7/8” 3/4” 5-1/2” 0.6 LKTP102

I Cat. 1 Extra Long Pin (Ford E381T9) 4-3/4” 3/4” 6-3/8” 0.8 LKTP103

II Cat. 2 Pin (Ford C5NN486A) 4-3/8” 1” 6” 1.3 LKTP201

Coated-Handle Hitch Pins



3-5/8” 1/2” 6-5/8” 0.7 LKCP050

5-3/4” 5/8” 9” 1.1 LKCP063

6-1/2” 7/8” 9-1/2” 1.9 LKCP089

7-1/2” 1” 10” 2.6 LKCP100

8-1/2” 1-1/8” 11-1/2” 3.3 LKCP113

8-1/2” 1-1/4” 11-1/2” 4.1 LKCP125

Tractor Drawbar Grab Hook


For drawbars up to 1-5/8” thick.

Use with 5/16” to 1/2” chain.

Working Load Limit

(lbs)

9,000 - NOT FOR

OVERHEAD LIFTING

Weight SKU

(lbs)

3.1 LKGH163


Linkage Parts

Hydraulic Cylinder Pins with Clips



2” 1” 2-3/4” 0.6 LKHC120

3-1/8” 1” 4” 0.9 LKHC131

Lynch Pins



1” 3/16” 1-5/8” 0.03 LKLP019

1-1/4” 1/4” 2-1/8” 0.07 LKLP025

1-1/2” 7/16” 2-1/8” 0.13 LKLP044L

Lock Pins

Usable Pin Wire Weight SKU

Length Diam. Loop (lbs)

1-3/4” 1/4” Round 0.06 LKLP175R

2-1/4” 5/16” Square 0.20 LKLP225S

2-1/4” 5/16” Round 0.10 LKLP225R


Ratchet Jacks are often replace hydraulic cylinders in equipment and

implement applications where adjustments are infrequent but needed.

Description Threads Length Weight SKU

Range (lbs)

Heavy Duty Ratchet Jack

1” Clevis pins, clip pins, handle, grease zerks

1-1/4”

ACME

20-28” 15 JAKR2028


Portable Hydraulic Power Pack

The AgKNX Portable Hydraulic Pack (PHP) is a stand alone source for hydraulic power. It can be

used to replace a tractor or skid steer as a source of power for remote hydraulic applications, or

to use hydraulic power where it wouldn’t otherwise be possible. Made with our selection of rugged

components and assembled with safety and ease of use at the forefront.

Features:

• Electric Or Manual Start options

• Removable handle on one side allows

fitting other handling devices

• Magnetic drain plug for hydraulic

tank

• Return filter extends life of hydraulic

fluid, your PHP, and implement being

used

• Rubber feet keep PHP in place and

absorb shocks during transport

• Available with electric start engine

• Wide-mouth fill port on tank

PHP50

PHP100

Engine 7.5 HP / 212cc 9 HP / 270cc

Hydraulic Tank 5.6 Gallons 10.2 Gallons

Hydraulic Pump 7.1 gpm, single stage 7.1 gpm, single stage

Control Valve 2-way, 25 gpm, 3000 psi action 2-way, 25 gpm, 3000 psi action

1-way 1000 psi (adjustable) detent 1-way 1000 psi (adjustable) detent

Max Output Pressure 900 psi 1200 psi

Electric Start Optional Yes (PHP50E) Yes (PHP100E)


1/2” quickconnect Ag fittings are

replaceable by other fittings of

choice. The valve has 1/2” Female

NPT fittings in which other fittings

can be installed.

Two female Ag fittings that simulate

a tractor are included standard.


Electric Hydraulic Power Units

Snowplow Unit

DC Unit

Car Lifts

Power units come individually boxed in robust, padded boxes with complete instruction manuals.

Model Motor Output Tank SKU

Single Acting DC

Power up, gravity down circuit; lowering movement

activated by solenoid valve and controlled by flow

control valve. Remote controlled.

Double Acting DC

Power up, power down circuit. A second relief valve

gives extra protection during lowering; lowering

speed auto adjusts via compensated flow control

valve. Remote controlled.

Double Acting DC w/ Flow Control

Power up, power down circuit. Sandwich valves provide

extra conrol for lowering and maintaining position

under high loads. Remote controlled w/ 15’ Cord.

220 V AC Car Lift

Designed for auto hoists. Power up, gravity down circuit.

Can be applied to different voltage and frequency.

Lowers via manual release valve. Can also apply to

hydraulic fork and scissor lifts.

12 Volt DC

1.5 kW

2 HP

S3 Duty

12 Volt DC

1.5 kW

2 HP

S3 Duty

12 Volt DC

1.5 kW

2 HP

S3 Duty

208-240 Volt

50/60 Hz

2.2 kW

3 HP

S3 Duty

2.1 cc/rev

1.4 gpm

@2500 rpm

2950 psi

2.1 cc/rev

1.4 gpm

@2500 rpm

2950 psi

2.1 cc/rev

1.4 gpm

@2500 rpm

2950 psi

2.1 cc/rev

1.9 gpm

@3450 rpm

2950 psi

12 qt steel HYPUCAT3

3.5 qt steel HYPUAAT4

5 qt steel HYPUAAN1

14.8 qt

plastic


HYPUQOT1

Snow Plow DC Unit

Power up, gravity down; lowering speed controlled by

adjustable needle valve. Power left and right operated

by dual pilot check valve and crossover relief valves.

12 Volt DC

1.5 kW

2 HP

S3 Duty

2.1 cc/rev

1.4gpm

@2500 rpm

2800 psi

2.1 qt steel HYPUAAT1


Hyrdualic Reservoirs

7 Gallon 15 Gallon

25 Gallon

These baffeled hydraulic tanks can be used on a large variety of applications. They feature a large

fill port with breather cap, a drain plug, and two fluid transfer ports. The mounting brackets cover

a range of mounting options. They feature interlocking design to minimize welding, and a temperature

gauge that is also a fluid level window.

Reservoir Depth

Size Width

Height

7 Gallon 14”

14”

11.75”

15 Gallon 13.5”

15.5”

17.5”

25 Gallon 15”

20.5”

18.5”

Mount Hole

Pattern

(Ctr-to-ctr)

15.89” Width

9.89” Height

18” Width

13.75” Height

23.25” Width

14.5” Height

Mouting

Bracket

Bottom

Rear

Rear

Ports Weight SKU

1.25” NPT

2” NPT

1.25” NPT

2” NPT

1.25” NPT

2” NPT

41.5 lbs HTP7

56.5 lbs HTP15

72 lbs HTP25



Gasoline OHV Engines

These high quality 4 stroke engines start easily even in cold weather and run reliably. All engines

are EPA certified and come with a manual and spark plug wrench in a padded box. Replacement

parts available.

DH212E

DH270

Engine Horse Torque Shaft Shaft PTO Bolt Starter Weight SKU

Size Power (ft-lb) Diameter Length Pattern

(lbs)

212cc 7.5 13.5 3/4” 2-7/16” 2.5” Square Recoil 32 DH212

212cc 7.5 13.5 3/4” 2-7/16” 2.5” Square Electric 36 DH212E

270cc 9 12.2 1” 3.5” Ø 112mm Recoil 55 DH270

270cc 9 12.2 1” 3.5” 3.5” Square Electric 59 DH270E

420cc 15 19.5 1” 3.5” 3.5” Square Electric 68 DH420E


DH420E


Hydraulic Tie Rod Cylinders

2500 psi double acting tie rod cylinder.

Both ends have a 1” pin. Rod ends are threaded.

All dimensions are in inches.

Bore

Diameter

Stroke

Length

Rod

Diameter

Retracted

Length

Extended

Length

Ports

Weight

(lbs)

2 6 1-1/8 16.25 22.25 3/8” NPT 15 TRCL2006NPT

2 8 1-1/8 18.25 26.25 3/8” NPT 17 TRCL2008NPT

2 10 1-1/8 20.25 30.25 3/8” NPT 19 TRCL2010NPT

2.5 8 1-1/8 18.25 26.25 3/8” NPT 20 TRCL2508NPT

2.5 16 1-1/8 26.25 42.25 3/8” NPT 29 TRCL2516NPT

2.5 24 1-1/8 34.25 58.25 3/8” NPT 34 TRCL2524NPT

3 8 1-1/4 18.25 26.25 1/2” NPT 27 TRCL3008NPT

3 8 ASAE 1-1/4 20.25 28.25 1/2” NPT 28 TRCL3008A

3 12 1-1/4 22.25 34.25 1/2” NPT 32 TRCL3012NPT

3 14 1-1/4 24.25 38.25 1/2” NPT 35 TRCL3014NPT

3 16 1-1/4 26.25 42.25 1/2” NPT 37 TRCL3016NPT

3.5 8 ASAE 1-1/4 20.25 28.25 1/2” NPT 32 TRCL3508A

3.5 16 1-1/4 26.25 42.25 1/2” NPT 48 TRCL3516NPT

3.5 30 1-1/2” 40.25 70.25 1/2” NPT 62 TRCL3530NPT

3.5 36 1-1/2” 46.25 82.25 1/2” NPT 70 TRCL3536NPT

4 8 1-1/2” 18.25 26.25 1/2” NPT 42 TRCL4008NPT

4 16 1-1/2” 26.25 42.25 1/2” NPT 62 TRCL4016NPT

4 24 1-1/2” 34.25 58.25 1/2” NPT 79 TRCL4024NPT


SKU

Custom Options are available on volumes over 50 with a two month lead time.


Hydraulic Cross Tube Cylinders

3000 psi double acting tie rod cylinder. All dimensions are in inches.

Bore

Diameter

Stroke

Length

Rod

Diameter

Retracted

Length

Extended

Length

Cross

Tube I.D.

Ports

1.5 16 1” 24 40 3/4” SAE-6 CTCL1516

2 8 1-1/4” 16 24 1” SAE-6 CTCL2008

2 18 1-1/4” 26 44 1” SAE-6 CTCL2018

2.5 6 1-1/2” 14 20 1” SAE-8 CTCL2506

2.5 10 1-1/2” 18 28 1” SAE-8 CTCL2510

2.5 16 1-1/2” 24 40 1” SAE-8 CTCL2516

2.5 18 1-1/2” 26 44 1” SAE-8 CTCL2518

3 16 1-1/2” 24 40 1” SAE-8 CTCL3016

Hydraulic Cylinder Stroke Reducer Blocks

Stroke Reducers: Shorten the stroke length of your cylinder

to save time when the full stroke is not needed. Aluminum with

finger tabs. Great for log splitters when splitting short logs.

Description Shaft Diameters Segment Lengths Weight SKU

4 Piece Reducer,

4.5” Total

4 Piece Reducer,

8.75” Total


1-1/8”, 1-1/4”,

1-3/8”, 1-1/2”

3/4”, 1”, 1-1/4”,

1-1/2”

1-3/4”, 2” 1”, 1-1/2”, 2”,

4.25”

1.9 lbs STRD118112

4.6 lbs STRD134200

SKU


Log Splitter Cylinders

Pin Holes: 1-1/8”

Inside Spacing: 7/8”

These log splitter cylinders are OEM quality. All have a 9/16” hole on the ram end to secure

wedge. Custom configurations in bulk are available on request.

Description Ports Bore

Diameter

Clevis Mount Cylinder

1/2” NPT

4”

24” Stroke, 3500 psi

Female

4.5”

Clevis holes: 1-1/8”

5”

Clevis inside spacing: 7/8”

MTD Trunnion Mount Cylinder


Fits MTD, Troy Built, Cub Cadet,

Bolens Trunnion Mount

MTD Trunnion Mount w/Flange


Older style w/ valve bracket

MTD Clevis Mount Cylinder


SAE-8 ORB

Female;

JIC-8 Male

SAE-8 ORB

Female;

SAE-8 ORFS

HYDC040

1/2” NPT Male

JIC-8 Male

Rod

Diameter

1.75”

1.75”

2”

Weight

(lbs)

58

60

70

SKU

HYDC040

HYDC045

HYDC050

4.5” 1.75” 60 HYDCM45

4”

4.5”

4”

4.5”

1.75”

1.75”

1.75”

1.75”

Log Splitter Build Kits

54

60

54

60

HYDCM45

HYDCM40F

HYDCM45F

HYDCM40F

HYDCM45F

We offer build kits that include any combination of cylinder, valve, pump, mounting hardware, and

even engines that we pair with the flow rate and tonnage needs of the kit. Contact us for details!


LSBK040A7


Log Splitter Pumps & Valves

“A” Flow Direction

“C” Flow Direction

LSPM011 LSPM022 LSVLA7 LSVL401

Description Attachment Options SKU

6.5 - 10 HP 2 Stage Hi-Lo Gear Pump, 4 Bolt

Aluminum body pump with high volume, low

pressure stage (<650psi) and a low volume

high pressure stage. At higher pressures

(650-3000psi) only the low volume stage

runs. Has check valve and relief valve. Great

for log splitters, presses, high pressure machine

tools. Options cover 5-15 HP motors.

Shaft: 1/2” w/ flat key

Inlet: 1” w/ barb

Outlet: 1/2” F NPT

Mount: 4 bolt, 2” square

11 (8.8/1.6) gpm

11 (8.8/2.1) gpm

13 (10.9/2.1) gpm

16 (13/3) gpm

19 (16.5/3.5) gpm

@3600rpm

650/3000psi

LSPMM11

LSPM011

LSPM013

LSPM016

LSPM019

11+ HP 2 Stage Hi-Lo Gear Pump, 2 Bolt

Aluminum body pump with high volume, low

pressure stage (<650 psi) and a low volume

high pressure stage. At higher pressures

(650-3000psi) only the low volume stage

runs. Great for log splitters, presses, high

pressure machine tools.

Log Splitter Valve, Adjustable Detent

Log splitter valve with adjustable detent,

keeping the valve in retract position until

retraction is complete, preset to return to

neutral at 1000 psi. 25 gpm maximum flow

rate, 3000 psi working pressure.

Handle Mounting Bracket, Log Splitter Valve

Handle mounting bracket to fits our valves

and many others used on SpeeCo, Huskee,

Brave, MTD, Northern and more.

Shaft: 5/8” w/ flat key

Inlet: 1” F NPT

Outlet: 3/4” F NPT Female

Mount:

SAE-A 2 bolt, 4.19” apart

Cylinder Ports:

1/2” NPT

Pump in & tank return

ports: 3/4” NPT

2” mounting hole distance

0.9” center hole

22 (16/7) gpm

28 (22/7) gpm

@ 3600rpm

650/3000psi

A Flow Direction

C Flow Direction


Standard

MTD Style

LSPM022

LSPM028

LSVLA7

LSVLC5

LSVL401

LSVL402


Pump Mounts & Couplers

Pump Mount Description Mounting & Couplers SKU

11-13 GPM Pump Mount

For 5-7 HP motors.

Ideal for 20-25 ton log splitters.

16 GPM Pump Mount, 5.25” Length

For 8-15 HP motors.

Ideal for 27-35 ton log splitters.

Works on Deli, MTD, Halidex and others’ pumps.

Mounts to Briggs, Honda, Kohler, Subaru motors.

22-28 GPM Pump Mount, 5.5” Length

For 15 HP and greater motors.

Ideal for 40 ton and greater log splitters.

24

LSPM301 LSPM302 LSPM303

LO 90 Set

Engine: 4 Bolt, 2.5” Square Pattern

Pump: 8 Bolt, 2-3/4” Circular (2” Squares)

Use with LO75 couplers


Pump: 4 Bolt, 2” Square Pattern

Holes for 5/16” bolt

Use with LO90, couplers


Pump: 2 Bolt, SAE-A 4.19” Pattern

Use with LO99 or LO100 couplers.

LSPM301

LSPM302

LSPM303

3-Jaw Lovejoy Couplers provide a dampened coupling from the motor to the pump. Each half

is listed, these halves are connected by a rubber “spider”, which provides damping to protect

the pump from impulses from the motor.

Inner Diameter LO75 - 1.75” OD LO90 - 2.11” OD LO99 - 2.54” OD LO100 - 2.54” OD LO110 - 3.31” OD

3/8” 75LJ38 - - - -

7/16” 75LJ716 - - - -

1/2” 75LJ12 90LJ12 - - -

9/16” 75LJ916 - - - -

5/8” 75LJ58 90LJ58 - - -

3/4” 75LJ34 90LJ34 99LJ34 100LJ34 110LJ34

7/8” 75LJ78 90LJ78 99LJ78 100LJ78 110LJ78

1” - 90LJ1 99LJ1 - 110LJ1

1-1/8” - 90LJ118 99LJ118 100LJ118 110LJ118

1-3/16” - - - 100LJ1316 -

1-3/8” - - - 100LJ138 110LJ138

1-1/2” - - 99LJ112 - 110LJ112

1-5/8” - - - - 110LJ158



Hydraulic Filters

Great for log splitters!

Use Filter Base SKU

Tank Return Filter & Base Assembly

Cellulose media

10 Micron

1”-12 UN Spin on

3.8” OD, 5.8” Tall

250 psi max pressure

25 psi bypass

valve

3/4” NPT in/out

LSFL010

Log Splitter & Trailer Wheels

Wheel Mounting Specs SKU

4.80-8 DOT (pictured left)

Includes dust cover & bearings

3/4” Bearing

Single lug on spindle

16” Tire, 4 Ply

390 lbs per wheel

For MTD, Troy Built, Cub Cadet

4.80-8 DOT

1” Bearing

16” Tire, 4 Ply TIRE4808

Includes hub cap & bearings

For Speeco, Brave Huskee and many others

Single lug on spindle 390 lbs per wheel

Weld on Spindles (pictured right)

1” Diameter

4-1/8” Flat to Flat

Includes castle

nut and cotter

pin

TIRE4000



Trailer Jacks

1000 lb

Wheeled

Flanged

Side Wind

Tubular

Top Wind

Tubular

Side Wind

We offer a full line of trailer jacks that cover a wide range of applications. Durable, time proven

construction is combined with comfortable handles and appealing style.

Lift Lift Mount Wind Base Static Weight SKU

Capacity Height

Capacity (lbs)

1000 10” Flange Side Wheel 1000 15 JAK1FWS

2000 10” Flange Side Plate 3000 17 JAK2F10S

2000 10” Tubular Top Plate 3000 14.1 JAK2T10T

2000 10” Tubular Side Plate 3000 14.0 JAK2T10S




Container Direct Only:

12000 lb Square Jacks

Contact for details.


Hand Held Earth Augers

One Person Design

Two Person Design

Our hand held power heads are ideal for installing fence posts, planting trees, installing vertical

beams for decks and can be used for ice fishing. EPA certified 2-stoke motors provide high power to

weight ratio. A centrifugal clutch provides smooth engagement. Auger bits allow digging to 3 feet

deep and have a pilot bit to help start the hole. All augers come with a hardware kit and manual.

Digger Power Heads Operation Power Weight SKU

43 cc Digger One person 1.7 HP 19 AUGH143



63 cc Digger Two person 3.0 HP 23 AUGH1632

Augers Bits Shaft Length Weight SKU

4” (10 cm) 3/4” Shaft, 3/8” pin 29.2” 5.2 AUGH010

6” (15 cm) 3/4” Shaft, 3/8” pin 29.2” 6.0 AUGH015

8” (20 cm) ** 3/4” Shaft, 3/8” pin 29.2” 8.4 AUGH020

10” (25 cm) ** 3/4” Shaft, 3/8” pin 29.2” 10.8 AUGH025

12” (30 cm) 3/4” Shaft, 3/8” pin 29.2” 11.0 AUGH030

** Available as Ice Auger


43cc w/ 8” Auger Combo Box

plus 8” Anti-Shock Spring

&

7” Extension

SKU: AUGH148A8PKG


Gate & Fence Hardware

Item Description Weight SKU

(lbs)

Small Gate Hinge Kit A pair of gate hinges (upper & lower) for roundtube

2.3 GTHN001

gates with tube diameters of 1-5/8” to

1-3/4”. The kit includes 5/8” x 6” wood bolts to be

mounted in a wood post and mounting hardware.

Large Gate Hinge Kit A pair of gate hinges (upper & lower) for roundtube

5.6 GTHN002

gates with 2” tube diameter. Kit includes ¾” x

12” mounting bolts to be mounted in a wood bolt

and mounting hardware.

One-Way

Lockable

Gate Latch

For round-tube gates of 1-5/8” to 2” diameter,

allowing the gate to open one way. Mounts on

wood post and accepts pad lock

3.1 GTLT001

Two-Way

Lockable

Gate Latch

Small

Two-Way

Lockable

Gate Latch

Deluxe

Wheel

Spinner

Post

Pounder

A gate latch designed for round-tube gates of

1-5/8” to 2” diameters. Allows the gate to open

either direction. Mounts on wood post and

accepts a padlock.

Lockable two-way gate latch designed for roundtube

gates of 1-1/4” to 1-1/2” diameter. Allows

gate to open either direction, mounts on round

tube and is padlock compatible.


Makes turning off-road equipment a breeze. Split

base design makes mounting easy. Use on steering

wheels up to 1-1/4” thick.

4.9 GTLT002

4.8 GTLT003

0.7 TRAC001

Manually operated 17 lb steel post pounder. 17 POPU017


Gate & Fence Hardware

Item Description Weight SKU

(lbs)

Gate Closer

Gate closer fits posts up to 5” diameter and

accepts a padlock. Powder coated and corrosion

resistant.

5.0 GTLT201

Gate Wheel

Tall Spring

Gate Wheel

Gate Anchor

T-Post

Puller

Wire Gripper

Wire Carrier

Fence Wire Stretcher

Gate wheel designed for round tube gates of

1-5/8” to 2” diameters. Allows the gate to open

and close easily while preventing the gate from

sagging.

Tall gate wheel adjusts height up to 6.5” for gates

with high ground clearance. Allows gate to open

and close easily while preventing the gate from

sagging. Fits round tube gates of 1-5/8” to 2” diameters.

Use a gate anchor to hold a livestock gate open

at any position, preventing swinging and sagging.

Fits round tube gates of 1-3/4” to 2” diameters.

A post puller designed to easily remove studded

“T” type posts from the ground with one person

operation, allowing reuse of posts. Can also be

used with a hook to be used for other post types.

This wire gripper holds barbed wire, smooth wire

and small cable in place while doing maintenance.

Safely and efficiently carry and unroll barbed wire

rolls. Spins free and accepts ½” pipe for use with a

partner or mounting on vehicle.

For stretching, tightening, splicing multiple wire

types including barbed, high tensile and smooth

wire.


4.5 GTWL001

8.9 GTWL002

4.0 GTWL003

17 PSPL001

0.9 WIRE001

0.5 WIRE002

8.3 WIRE101

Fence Wire Stretcher

w/ Ratchet Control

Wire stretcher with ratchet control, allowing a

controlled release of wire tension.

8.6 WIRE102


agricultural-gearbox-pto-shaft-20200714压缩

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?