Vinyl Resins

Recommendations

Info

table 2 4 Applications & Characteristics Applications Packaging General Marine & Magnetic Strippable Wood Food Non-Food Metals Maintenance Media Inks Adhesives Coatings Finishes VYNS-3 ■ ■ ■ ■ ■ ■ VYHH ■ ■ ■ ■ ■ ■ VYHD ■ ■ ■ ■ VMCH ■ ■ ■ ■ ■ VMCC ■ ■ ■ ■ ■ VMCA ■ ■ ■ ■ ■ VERR-40 ■ VAGH ■ ■ ■ ■ ■ ■ ■ VAGD ■ ■ ■ ■ ■ VAGF ■ ■ ■ ■ ■ ■ ■ VAGC ■ ■ ■ ■ ■ ■ VROH ■ ■ ■ ■ UCARMAG® Binder 527 ■ 569 ■ table 3 General Characteristics of UCAR® Solution Vinyl Resins Appearance* White powder Particle Size % by wt, min, through 20 mesh 98 Bulk Density, lb/ft 3 24 to 34 Heat Loss, % by wt, max 3.0 Water Content, % by wt, max 0.5 Melting Point, ºC 93 to 135 *VERR-40 is a solution
FDA Status The UCAR® Solution Vinyl Resins listed below are cited in the following regulations 1 of the United States Food and Drug Administration (FDA) for use in food-contact applications, such as can, paper, film, and foil coatings, and coatings for closures. FDA Regulation Use UCAR® Solution Vinyl Resin 21CFR 175.105 Components of adhesives used in articles intended VYHD, VYHH, VYNS-3, for packaging, transporting or holding food. VMCA, VMCC, VMCH, VAGD, VAGH, VERR-40 21CFR 175.300 Components of resinous and polymeric coatings VYHD, VYHH, VYNS-3, to be applied as continuous films to food-contact VMCA, VMCC, VMCH, surfaces of articles intended for use in processing, VAGD, VAGH, VERR-40 manufacturing, packing, producing, heating, packaging, holding, or transporting food. 21CFR 175.320 Components of a coating that is applied as a VYHD, VYHH, VYNS-3, continuous film over one or both sides of a base VMCA, VMCC, VMCH, film produced from one or more of the basic olefin VAGD, VAGH polymers complying with 177.1520. 21CFR 176.170 Components of the food-contact surface of paper VYHD, VYHH, VYNS-3, and paperboard used to package aqueous and VMCA, VMCC, VMCH, fatty foods. VAGD, VAGH 21CFR 176.180 Components of paper and paperboard in contact VYHD, VYHH, VYNS-3, with dry food. VMCA, VMCC, VMCH, VAGD, VAGH, VERR-40 21CFR 177.1210 Components of closures with sealing gaskets VYHD, VYHH, VYNS-3, for food containers. VMCA, VMCC, VMCH, VAGD, VAGH, VERR-40 (1) Since government regulations are subject to revision, it is the user’s responsibility to refer to the Code of Federal Regulations or the Federal Register to determine current regulatory status. 5
Page 1 and 2: UCAR® Solution Vinyl Resins for Co
Page 3 and 4: UCAR ® Solution Vinyl Resins for C
Page 5: UCARMAG® Binder VERR-40 VAGH VAGD
Page 9 and 10: Carboxyl-Modified Vinyl Chloride/Vi
Page 11 and 12: UCARMAG® Binder 527 A high molecul
Page 13 and 14: Viscosity vs. Concentration of VYHD
Page 15 and 16: Viscosity vs. Concentration of Viny
Page 17 and 18: Viscosity vs. Concentration of Hydr
Page 19 and 20: Viscosity vs. Concentration of Carb
Page 21 and 22: Memory Effect of Vinyl Resin Soluti
Page 23 and 24: Solvents for UCAR® Solution Vinyl
Page 25 and 26: Light Stabilizers An adequate quant
Page 27 and 28: Typical Pigments for UCAR® Vinyl C
Page 29 and 30: Pigments can be easily dispersed in
Page 31 and 32: Adhesion For good adhesion, surface
Page 33 and 34: Product Safety When considering the
Page 36: U Union Carbide Corporation 39 Old

Vinyl Resins

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?