Envirosun Ts Plus Solar Hot Water Heaters in Australia

ENVIROSUN TS PLUS SOLAR HOT WATER SYSTEMS
Envirosun Ts Plus Solar Hot Water Heaters Are
One of the Highest Performing and Awarded
Systems in Australia
The Envirosun TS Plus 300 litre, 2 panel thermosyphon solar hot water heater is a
superior made hot water unit, with the roof mounted cylinder is manufactured in
Holland from a very high grade 444 Stainless Steel for a longer life expectancy, the
bare stainless stell storage tank is imported and is all assembled in Victoria and
comes with 2 of the highest rated solar panels in the market. Envirosun’s HS solar
panels are manufactured by America’s Helidyne, a company of nearly 50 years
and a leading supplier of quality solar heating systems worldwide. Envirosun also
has a range of solar panels for far north Queensland, Northern Territory and other
hotter areas closer to the equator where solar adsorption rates are extreme.
There is also the Envirosun THX Plus for high frost and colder climates

Therefore the Envirosun thermosiphon Plus range has a product suitable for
nearly every region in Australia
Envirosun TS Plus solar hot water system is approximately 1/2 the weight on
other mild steel enamel lined rooftop solar hot water systems.
• Queensland
• New South Wales
• Victoria
• Western Australia
• South Australia
• Northern Territory
• ACT
• Tasmainia
ENVIROSUN TS PLUS SOLAR HOT WATER SYSTEM
COME WITH 10 YEARS WARRANTY ON THE TANK
AND SOLAR PANELS
• Envirosun’s Thermosiphon System (TS Plus) is one of the most advanced solar
hot water systems available in todays market, offering a extremely high efficiency
rate and a cost effective solution for most domestic homes. The hot water storage
cylinder and the solar collector panels are roof-mounted together as one
seamless combined unit. Water is heated in the flat plate solar collector, and
natural convection of hot water rising moves the water through the system into
an insulated storage tank located above the solar panels on the right hand side as
cooler water from the tank falls from the left into the lowest part of the solar
panels, minimizing any energy required.

This design has been in roof mounted solar water heaters since the development
of solar water heating and outperforms other types of systems and offers a
superior level of efficient, economical water heating. The clever design and
engineering of the Envirosun Thermosiphon System utilises the strongest
materials and state-of-the-art tank protection valves and systems to ensure a long
operating life in all environments, from the freezing temperatures to extreme
heat. The latest cutting edge technology and the cumulative advancements
of Envirosun’s 25 years Industry Experience combine to offer the ultimate in
durability, reliability and affordability.
Envirosun is a Australian owned company that is operated with true family values
and integrity, with the highest level of quality control that makes the Envirosun TS
Plus thermosyphon stainless steel solar hot water heater choice a smart one, not
only financially but environmental and for a sustainable future Australia.
Contact us for more details on how we can supply you with this quality affordable
solar hot water system.

HOW DOES AN ENVIROSUN TS PLUS SOLAR HOT
WATER SYSTEM WORKS?
The solar hot water storage tank and panels are connected together and located
on the roof structure, facing in a northerly direction. Hot water has a natural fall
and rise cycle, hot water rises and cold water falls to the lowest point, as the sun
heats the water in the collector, it rises and then goes into a storage tank.
Hot water rises naturally in the tank – this process is called thermo-siphoning,
that’s why this type of solar water heaters is known as thermosyphon solar hot
water systems and the Envirosun TS Plus model
The colder water at the bottom of the storage tank then travels into the lowest
point of the solar collector panel and as it starts to heat up it rises in the solar
panels to the highest point, then through a pipe to the storage tank.
The solar hot water panels are a sealed cased box with toughened glass face, a
manifold of copper pipes and black powder coated copper absorption plates or
fins to attract the heat and with the underside being fully insulated, traps the heat
inside to give maximum solar gain and heat transfer to the water
This process is a continuous cycle and can save the average household over 80%
of their hot water energy usage and related greenhouse gas emissions, not to
mention the money that is saved with this type of solar hot water systems.
BELOW IS A BIT OF TECHNICAL TALK ABOUT THE
ENVIROSUN TS PLUS SOLAR HOT WATER HEATER
RANGE

THE ENVIROSUN THERMOSIPHON STORAGE CYLINDER
ENVIROSUN PIONEERED AND MASTERED THE USE
OF TYPE 444 FERRITIC STAINLESS STEEL IN THE
CONSTRUCTION OF OUR TS PLUS SOLAR HOT
WATER RANGE
444 STAINLESS STEEL
EUROPEAN MADE
10 YEAR WARRANTY
COMPARED WITH TRADITIONAL AUSTENITIC
STAINLESS STEEL (SUCH AS TYPE 316L AND 304L)
FERRITIC STAINLESS STEELS OFFER MAJOR
PERFORMANCE ADVANTAGES. IN PARTICULAR,
TYPE 444 OUT-LASTS TYPE 316L WHEN IT COMES
TO RESISTING LOCALIZED CORROSION OR PITTING
ATTACK AT ELEVATED WATER TEMPERATURES.
GENERALLY, TYPE 444 IS A HIGHLY DURABLE AND
TROUBLE-FREE MATERIAL THAT OFFERS
SIGNIFICANT LIVE CYCLE COST ADVANTAGES.
STAINLESS STEELS DERIVE THEIR CORROSION
RESISTANT PROPERTIES THROUGH THE INCLUSION
OF STAINLESS STEEL. HOWEVER THE KEY TO THE
ENHANCED PERFORMANCE OF THIS TYPE 444 IS
THE ADDITION OF MOLYBDENUM AND CHROMIUM

AS FURTHER ALLOYING ELEMENTS (TRADITIONAL
AUSTENITIC GRADES INCORPORATE NICKEL).
DURING THE FINAL STAGE OF THE FACTORY
GUARANTEE PERIOD YOU SHOULD ARRANGE FOR
AN END-OF-WARRANTY SERVICE TO BE CARRIED
OUT. THESE QUALITY EUROPEAN MADE 444
STAINLESS STEEL CYLINDERS HAVE THE FINAL
ASSEMBLY HERE IN AUSTRALIA
THE SOLAR PANELS
THE ABSORBER PLATES IN OUR SOLAR COLLECTORS ARE DESIGNED TO ABSORB
MORE OF THE SUN’S ENERGY AND RADIATE LESS BACK TO THE ENVIRONMENT
AS HEAT.
To achieve this they undergo a two-stage electroplating process. They are first
plated with a layer of bright nickel and then re-treated with an over-coat of black
chrome. This creates a ‘spectrally-selective surface’ that absorbs more solar
radiation and re-emits less thermal energy. The underlying mechanisms are
relatively simple. In the short wavelength part of the spectrum, the absorber
behaves like a black surface and soaks up most of the sun’s energy. In the long
wave length part of the spectrum, the absorber behaves like a silver surface and
re-radiates little of its heat.
Envirosun’s black chrome absorbers plates have the highest efficiency solar
selective coating available and they deliver performance gains about 20% above
those available from such non-selective treatments.
Envirosun Solar Hot Water Panels are secured inside high grade coated
aluminium frames to reduce any corrosive materials on your roof

OUR COLLECTORS ARE FITTED WITH SOLAR GLASS THAT IS HIGHLY
TRANSLUCENT AND VERY STRONG.
It’s intended as maximizing the amount of solar energy that is captured by the
collector absorber plates (panels) while protecting them from impact damage. To
explain, this, it’s first necessary to understand how a solar collector uses the
‘greenhouse-effect’ phenomenon to heat water.
As the sun’s ray’s fall on the glass cover is a form of short wavelength radiation.
Most of the solar radiation passes through the glass but some is reflected or
absorbed. The transmitted portion of solar radiation that reaches the black
copper absorber plate, heats it and the water that is contained inside the
pipework. The hot absorber also re-radiates thermal energy (a form of long
wavelength radiation) which, in the absence of a cover, would escape and allow
the plate to cool. The glass cover, however, acts as a reflector of the long
wavelength radiation and bounces it back to the absorber, thereby containing the
heat. Glass that has higher iron levels absorbs more solar radiation and allows less
to reach the absorber plates. Low-iron glass can transmit about 91% of the
incident solar radiation. Envirosun solar glass is produced with very low levels of
iron impurities. Envirosun solar glass is also tempered using a heat-treatment
process.

Envirosun solar hot water systems have all the extras
you will ever need for your TS Plus thermosiphon
solar water heater
CONTACT INFO
If you have any questions simply use the following contact details.
Email Address
info@envirosun.com.au
Phone Number (Sales)
1300 046 893
Phone Number (Service)
1300 046 893
Website : https://envirosunsunshinecoast.com.au/