2017 Amada New AFH Standard PBT

U bending
Back to
Special Tools 67
index
Notes:
- best results for R ≈ t; U≈(4t bis 30mm)
- U results will vary around ±0,2mm
- top side of the U shape could slightly open
Beading (longitudinal to the bending line)
Note:
- best results for R≈(3t bis 10mm);
V≈(4t bis 30mm) and A> 60° (mild steel)
- H results will vary around ±0,2mm
- for B<10t less accuracy
Beading (transversal to the bending line)
Needed data:
Flattening
Note:
- for C=2t high bending force is required
- for more complex parts double-deck type tools are not possible
- higher flange of H > B could cause tonnage problems