A Complete Guide on ESD Best Practices (Electrostatic Discharge)
ESD Stands for Electrostatic Discharge. Electrostatic discharge occurs when electricity flows through a conductive body when touched by another charged body. This usually happens when two charged bodies are in physical contact. In the case of electronics, this phenomenon occurs when the circuit is shorted out at some place, or a capacitor dielectric has broken down.
ESD Stands for Electrostatic Discharge. Electrostatic discharge occurs when electricity flows through a conductive body when touched by another charged body.
This usually happens when two charged bodies are in physical contact. In the case of electronics, this phenomenon occurs when the circuit is shorted out at some place, or a capacitor dielectric has broken down.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2/27/23, 11:57 AM A Complete Guide on ESD Best Practices (Electrostatic Discharge)
Design Guide On USB-C PD Charge-Through Feature
Design-Guide/)
Oxeltech
March 23, 2022
(h ps://oxeltech.de/en/usbc-design-guide/)
Altium’s Team Collaboration Features In PCB Design
With Data Role Swap (Https://Oxeltech.De/En/Usb-C-
(Https://Oxeltech.De/En/Altium-365-Team-
Collaboration/)
March 6, 2022
(h ps://oxeltech.de/en/altium-
365-teamcollaboration/)
Using Zephyr OS For Interfacing An IMU Sensor With
NRF52 Over SPI (Https://Oxeltech.De/En/Using-
Zephyr-Os-For-Interfacing-An-Imu-Sensor-With-
Nrf52-Over-Spi/)
July 25, 2021
(h ps://oxeltech.de/en/using-
zephyr-os-for-
interfacing-an-imu-
sensor-with-nrf52-
over-spi/)
Use Of Grounding Techniques In PCB Design To
Prevent Electromagnetic Interference (EMI)
(Https://Oxeltech.De/En/Pcb-Grounding-Techniques/)
June 29, 2021
https://oxeltech.de/en/esd-best-practices/ 10/14