2023 ACE Catalogue MENA

MIDDLE EAST / NORTH AFRICA 

BONE REGENERATIVE 

PRODUCTS CATALOG 

6TH EDITION

2 

Dental Implants 

ACE Surgical Supply • 2023 Middle East / North Africa Catalog 

Minimum size. 

Maximum Ease. 

MINIMARK IMPLANT SYSTEM 

Implant Sizes and Offerings 

Cuff Height 

Thread 

Diameter 

LOCATOR LOCATOR PREP LOCATOR LOCATOR LOCATOR LOCATOR LOCATOR 

Diameter 2.3mm 2.3mm 2.3mm 2.9mm 2.9mm 3.25mm 3.25mm 3.25mm 

If tissue depth is... 2-3mm 4-5mm NA 2-3mm 4-5mm .5-1.5mm 2-3mm 4-5mm 

Cuff Height 2mm 4mm NA 2mm 4mm .5mm 2mm 4mm 

8mm length NA NA NA 10-29-0820 NA 10-32-0805 10-32-0820 NA 

10mm length 10-23-1020 10-23-1040 11-23-1000 10-29-1020 10-29-1040 10-32-1005 10-32-1020 NA 

11.5mm length 10-23-1120 10-23-1140 11-23-1100 10-29-1120 10-29-1140 10-32-1105 10-32-1120 10-32-1140 

13mm length 10-23-1320 10-23-1340 11-23-1300 10-29-1320 10-29-1340 10-32-1305 10-32-1320 10-32-1340 

15mm length 10-23-1520 10-23-1540 11-23-1500 10-29-1520 10-29-1540 10-32-1505 NA NA 

See page 5 

for miniMARK 

compatible 

components (Locator R-Tx and F-Tx not compatible) 

COMPLETE KIT: 

09-2949-76 miniMARK Dental Implant System 

Kit Contents: 

63-011-06 Stainless Steel Tissue Probe, 1-12mm Markings 

003-5245 Implant Torque Wrench, 20-45 Ncm 

206-8393 Zest LOCATOR ® Male Install/Remove Tool 

20-1519-11 miniMARK Hand Driver 

04-9741-11 miniMARK CA Driver 

92-000-03 Contra-Angle Tissue Punch, 3mm, 25mm 

20-9005-01 miniMARK Mini Tissue Depth Gauge 

20-9780-01 Parallel Pin/Depth Gauge, 4/pkg 

454-281001 2.3 Implant Starter Bur (0.8/1.6mm), 30mm 

454-281201 2.3 Implant Dense Bone Bur (0.7/2.3mm) 

454-281002 2.9 Implant Starter Bur (1.3/2.1mm) 

454-281401 2.9 Implant Dense Bone Bur (1.2/1.8mm) 

88-33-0009 3.25mm Implant Starter Bur (1.6-2.35mm) 

04-9881-01 3.25mm Implant Twist Drill (2.8mm) 

04-9561-01 3.25mm Implant Bone Tap 

454-5211 Autoclavable Set Up Tray, 6-1/2” x 4” x 1-3/4”



3 

infinity OCTAGON Bone Level Implants 

infinity OCTAGON 

Bone Level - 

Diameter 3.3mm - 4.1mm 4.8mm 

Style Straight - Straight Straight 

8mm Length 503308BL - 504108BL 504808BL 




Platform 


Bone Level Taper 

NARROW 

PLATFORM 

P 

L 

BONE LEVEL 

A 

NP 

T 

F 

R 

O 

M 

NARROW 

PLATFORM 

P 

L 

BONE LEVEL 

A 

NP 

T 

F 

R 

O 

M 

REGULAR 

PLATFORM 

P 

L 

BONE LEVEL 

A 

RP 

T 

F 

R 

O 

M 

REGULAR 

PLATFORM 

BONE LEVEL 

Diameter 3.3mm 3.75mm 4.1mm 4.8mm 

Style Taper Taper Taper Taper 

8mm Length BLT503308 BLT503708 BLT504108 BLT504808 



infinity OCTAGON Tissue Level 

P 

L 

A 

RP 

T 

F 

R 

O 

M 

Dental Implant Systems 

INFINITY OCTAGON 

DENTAL IMPLANTS 

The infinity OCTAGON Dental Implant System 

delivers a truly compatible, functional and 

aesthetic dental implant solution for you and 

your patients. 

The infinity Octagon implant system has been 

designed to work with some of the leading 

octagonal configured systems in the market 

today. The infinity Octagon platform allows 

for a secure connecting interface between 

the implant and prosthetic components. The 

precise manufacturing of all infinity Octagon 

components is what separates this system from 

other compatible dental implant systems. 

The implants are manufactured from grade 4 

pure titanium and are available in tissue level 

and bone level versions. The surface in the 

endosteal section is sandblasted with large 

particles of corundum and acid-etched. The 

macro-roughness exhibits a roughness profile of 

20 to 40μm with micro-roughness of 2 to 4μm, 

providing an optimal surface topography for 

osseointegration. 

From a single tooth to a full arch restoration, 

infinity Octagon implants and prosthetics are 

easy to use and restore. The implant system is 

functionally identical at a price that makes sense 

for your practice. 


Tissue Level 

INFINITY OCTAGON BLT 

SURGICAL KIT 

50991002 complete surgical kit 

Diameter 3.3mm 4.1mm 4.1mm 4.8mm 4.8mm 

TISSUE LEVEL 

RP 

TISSUE LEVEL 

RP 

TISSUE LEVEL 

RP 

TISSUE LEVEL 

RP 

TISSUE LEVEL 

WP 

P 

L 

A 

T 

F 

R 

O 

M 

P 

L 

A 

T 

F 

R 

O 

M 

P 

L 

A 

T 

F 

R 

O 

M 

P 

L 

A 

T 

F 

R 

O 

M 

P 

L 

A 

T 

F 

R 

O 

M 

Platform 

REGULAR 

PLATFORM 

REGULAR 

PLATFORM 

REGULAR 

PLATFORM 

REGULAR 

PLATFORM 

WIDE 

PLATFORM 

Style Straight Straight Tapered Straight Straight 

8mm Length 503308 504108 - 504808 504808WP 

10mm Length 503310 504110 504110T 504810 504810WP 

12mm Length 503312 504112 504112T 504812 504812WP 

14mm Length 503314 504114 - - - 

INFINITY OCTAGON BL/TL 

SURGICAL KIT 

50991000 complete surgical kit


4 


ZEST LOCATOR ® ABUTMENTS 

Removable Attachment Abutments (recommended torque: 35 N-cm) 

Abutment sold without Attachments: - See next page for components 

Implant System Collar Height 1.25mm 2.25mm 3.25mm 4.25mm 5.25mm 

OCTAGON TL RP 2068621 2068622 2068623 2068624 - 

ZEST LOCATOR R-Tx ® ABUTMENT 

Removable Attachment Abutments (recommended torque: 35 N-cm) 

Each F-Tx Abutment includes: - 1 Denture Attachment Housing, 1 Processing and 4 Retention Inserts, 1 White Block-Out Spacer 

Implant System Collar Height 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 

OCTAGON BL BLT NP 2063090001 2063090002 2063090003 2063090004 2063090005 

OCTAGON BL BLT RP 2063090101 2063090102 2063090103 2063090104 2063090105 

OCTAGON TL BLT RP - 2063130202 2063130203 2063130204 2063130205 

ZEST LOCATOR F-Tx ® ABUTMENT 

Fixed Attachment Abutments (recommended torque: 35 N-cm) 

Each F-Tx Abutment includes: - 1 Denture Attachment Housing, 1 Processing and 3 Retention Balls, 1 White Block-Out Spacer 

Implant System Collar Height 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 6.0mm 

OCTAGON BL BLT NP 2061090001 2061090002 2061090003 2061090004 2061090005 2061090006 

OCTAGON BL BLT RP 2061090101 2061090102 2061090103 2061090104 2061090105 2061090106 

OCTAGON TL RP - 2061130202 2061130203 2061130204 2061130205 2061130206

ZEST LOCATOR ® ABUTMENT COMPONENTS 



5 

COMPONENTS 

Order # 

COMPONENTS 

Order # 

COMPONENTS 

Order # 

Standard Range 

Male Processing Pkg. 

- 2 sets/pkg 206-85192 

- 10 sets/pkg 206-851910 

Extended Range 

Male Processing Pkg. 

- 2 sets/pkg 206-85402 

- 10 sets/pkg 206-854010 

Processing Insert, 

Zero Retention Male, 

0 lbs, Black, 4/pkg 

Standard Range, 

Retention Male, 4/pkg 

206-8515 

Regular, 5 lbs, Clear, 206-8524 

Light, 3 lbs, Pink 206-8527 

X.Light 1.5 lbs, Blue 206-8529 

Extended Range, 

Retention Male, 4/pkg 

Regular, 3-4 lbs, Green 206-8547 

Light, 2 lbs, Orange 206-8915 

X.Light, .5-1.5 lbs, Red 206-8548 

Processing Spacer 

White, 4/pkg 

206-8569 

+ 

* 

* 

* 

* 

* 

* 

R-Tx Replacement 

Processing Pack - 

4/pkg 

Grey, Zero Retention 20630001-01 

Blue, Low Retention 20630002-01 

Pink, Med. Retention 20630003-01 

White, High Retention 20630004-01 

R-Tx Processing Insert 

- Black, 4/pkg 

Denture Attachment 

Assembly, Cap and 

Black Processing 

Insert, 4/pkg 

R-Tx Impression 

Analog, 4/pkg 

20630012-01 

20630013-01 

3.35mm Analogs 20630014-01 

4mm Analogs 20630015-01 

5mm Analogs 20630016-01 

Block Out Spacer 

White, 20/pkg 

R-Tx Impression Coping, 

4/pkg 

206-8514 

20630017-01 

* 

* 

* 

* 

* 

* 

F-Tx Processing Cap 

2/pkg 

F-Tx Ball Insert, 

2/pkg 

206-10030-01 

Black, Processing 206-10032-01 

Blue, Low Retention 206-10033-01 

White, Med. Retention 206-10034-01 

Green, High Retention 206-10035-01 

F-Tx Healing Cap 

2/pkg 

F-Tx Abutment 

Analog, 2/pkg 

F-Tx Waxing Cap 

2/pkg 

F-Tx Denture 

Attachment Housing, 

2/pkg 

F-Tx Impression 

Coping, 2/pkg 

F-Tx Polishing Cap 

2/pkg 


White, 20/pkg 

206-10036-01 

206-10037-01 

206-10040-01 

206-10031-01 

206-10038-01 

206-10039-01 

206-8514 


White, 20/pkg 

206-8514 

R-Tx Processing 

Spacer, 4/pkg 

20630018-01 

F-Tx 

Removal Loop 

F-Tx 

Removal Tool Bar 

206-10023-01 

206-10024-01 

LOCATOR ® Transfer 

4/pkg 

LOCATOR ® Analog 

4/pkg 

206-8505 

206-8516 

R-Tx .050” (1.25mm) 

Hex Insert Driver, 

Thumb Knob 

R-Tx .050” (1.25mm) 

Hex Insert Driver, CA 

Latch Driver 

20608007 

20608008 

Final Package, 

F-Tx Seating and 

Removal Tool, 

includes 

10100 

F-Tx Tip Wrench 10094 

CA Driver For 

LOCATOR ® Abutment 

LOCATOR ® Core Tool, 

3 tools in 1 

2068914 

206-8393 

R-Tx .050” (1.25mm) 

Hex Insert Driver, 

Square Ratchet 

20604936 

F-Tx Seating Tip 10095 

F-Tx Removal Tip w/ 

Threaded Adaptor 

10096 

R-Tx Retention Insert 

Installation/Removal 

Tool, 3 tools in 1 

2063002101 

F-Tx Replacement 

Wire 

10097 

F-Tx Threaded 

Adaptor 

10098 

F-Tx Wire and Lever 

Wrench 

10099 

F-Tx 

Manual Driver 

206-10028-01 

1 2 3 

Install 

LOCATOR ® 

abutments 

Insert 

retention 

males 

Remove 

retention 

males 

1 2 3 

Remove 

retention 

inserts 

Insert 

retention 

inserts 

Disengage 

retention 

inserts 

F-Tx 

Latch Driver 

F-Tx 

Ball Hex Driver 

206-10029-01 

206-10042-01 

*One of these is included with each R-Tx abutment 

*One of these is included with each F-Tx abutment

6 

Bone Regeneration 


alloOss ALLOGRAFT PARTICULATE AND BLOCK 

alloOss Allograft is offered in particulate and block. 

alloOss is a safe, predictable and effective solution for 

providing a scaffolding for cell ingrowth and promoting 

the growth of new bone. 

alloOss is recommended for: 

• Extraction socket preservation 

• Periodontal defects 

• Grafting for implant placement 

Natural Allograft Bone 

• Ridge and sinus augmentation 

• Sinus elevation 

• Composite sinus grafting 

alloOss mineralized Allograft Particulates and Blocks preserve natural collagen 

and minerals with the bony structure of allograft. The existence of these natural 

minerals and collagen facilitate remodeling of the host bone suitable for 

implantation. alloOss products are designed to promote new bone formation. 

Safe and Effective 

The complete line of alloOss products have been processed and sterilized to the 

highest standards set forth by the American Association of Tissue Banks (AATB ® ) 

and the U.S. Food and Drug Administration (FDA) regulations. alloOss allograft is 

obtained and processed in conjunction with AATB accredited tissue banks. 

Tissue Processing 

Tissues are processed in accordance with AATB standards and FDA regulations, 

as well as our own stringent processes, policies and procedures. Operating to 

these standards allows ACE to provide you with one of the purest, predictable 

and proven allografts available today. 

Functional Quality Comparison: Cancellous and Cortical 

Particulate Qualities Cancellous Cortical 

Osteoconductive Function HHH HH 

Space Maintenance HH HHH 

Density HH HHH 

Volume Enhancement HH HHH 

CLEANSING PROCESS FOR alloOss 

Phase 1: 

Stringent screening procedures for donor selection. 

Phase 2: Initial physical inspection and debridement to eliminate 

substandard tissue and aseptic placement in canisters, reducing 

risk of tissue contamination. Tissue is processed via minimal 

manipulation in cGTP conditions in ISO 5 (Class 100) clean 

rooms using procedures and screening criteria that meets the 

requirements of the AATB. 

Phase 3: Cleansing reaches deep within the tissues with a process 

that sustains consistency. The process, which uses mechanical 

energy and rotation, is customized based on specific tissue type 

and weight. Microbiological testing is performed before and after 

processing to ensure safety of the final product. 

Phase 4: Low dose low temperature irradiation provides the tissue 

with a Sterility Assurance Level (SAL) of 10 -6 without compromising 

the mechanical integrity of the allograft tissue. 

Phase 5: Full water immersion extraction, as opposed to batch 

swab, is taken for increased accuracy of microbial presence reading. 

allograft particulates and blocks 

alloOss MINERALIZED PARTICULATE 

alloOss Allograft Particulates offer the structural strength required to maintain 

space and volume during the remodeling phase. Used alone or as a composite 

graft, alloOss Particulates are an effective alternative to 

intraoral graft harvesting. 

• Provides scaffold for cell ingrowth 

• Remodels completely 

• Predictable Guided Bone Regeneration 

• Stabilizes implants after 4-6 months 

• Fills voids and extensive bone defects 

• Regeneration of periodontal defects 

MINERALIZED CANCELLOUS PARTICULATE 

01-107-001 Cancellous Particulate 250-1000 mic. 0.5cc 






MINERALIZED CORTICAL PARTICULATE 

01-160-001 Cortical Particulate 250-1000 mic. 0.5cc 






MINERALIZED 50-50 CORTICO/CANCELLOUS PARTICULATE 

01-104-000 Cortico/Cancellous 250-1000 mic. 0.25cc 







AATB ® is a registered service mark of the American Association of Tissue Banks.



7 

alloOss NATURAL BLEND PARTICULATE 

alloOss Natural Blend is a perfect blend of both cortical and cancellous bone particles, 

allowing for a more natural mirroring of the composition of human bone; making it a 

perfect solution for promoting the growth of new bone. 

MINERALIZED CORTICO/CANCELLOUS PARTICULATE 





MINERALIZED CORTICO/CANCELLOUS PARTICULATE IN A SYRINGE 

01-108-204 Pre-filled Syringe 500-1000 mic. 0.5cc 

01-108-205 Pre-filled Syringe 500-1000 mic. 0.75cc 

MINERALIZED/DEMINERALIZED CORTICO/CANCELLOUS PARTICULATE 

01-109-200 Min/Demin Blend 500-1000 mic. 0.25cc 




alloOss DEMINERALIZED CORTICAL PARTICULATE 

alloOss Demineralized Cortical Bone is appropriate for use in any procedure where bone 

healing is desired. Routine testing for osteoinductivity is performed to ensure the highest 

quality and efficacy for your regeneration procedures. 

• Filling voids and defects 

• Augmenting prosthetic implants 

• Filling structural allografts 

• Increasing osteoinduction 

01-170-001 Demineralized Bone 125-710 mic. 0.25cc 




alloOss ® 

Natural Blend 

in a Syringe 

alloOss BLOCK GRAFT 

A cortico/cancellous block for restoring bone volume in severely resorbed 

ridges without the harvesting of autogenous block graft from the patient. 

• Approximate healing in 5-6 months 

• Cancellous component for rapid healing and revascularization 

of host bone to the new graft 

• Maintains strength and volume with predictable remodeling 

• Cortical component for strength and rigidity of the graft with volume enhancement 

01-241-006 Block Allograft (less prep needed) 18 x 6 x 8mm 

01-241-010 Block Allograft 18 x 10 x 8mm 

01-241-015 Block Allograft 18 x 15 x 8mm


8 


NuOSS GRANULES 

NuOss natural cancellous (spongiosa) and cortical bone matrix is produced by the removal 

of all organic components from bovine bone. Due to its natural porous structure, NuOss is 

physically and chemically comparable to the mineralized matrix of human bone. 

The proprietary manufacturing process of NuOss allows for maintenance of the naturally 

occurring bone mineral structure, including macroscopic and microscopic structures. Due 

to this trabecular architecture with interconnecting macro and micro pores, the ingrowth of 

new bone and associated vascularization at the site of grafting is optimized. 

NuOss may be used with autogenous bone where there is an insufficient quantity of bone to 

fulfill the needs of the proposed surgical procedure. 

cancellous and 

cortical granules 

NuOss is recommended for: 

• Augmentation or reconstructive treatment of the alveolar ridge 

• Filling of infrabony periodontal defects 

• Filling of defects after root resection, apicoectomy, and cystectomy 

• Filling of extraction sockets to enhance preservation of the alveolar ridge 

• Elevation of the maxillary sinus floor 

• Filling of periodontal defects in conjunction with products intended for 

Guided Tissue Regeneration (GTR) and Guided Bone Regeneration (GBR) 

• Filling of peri-implant defects in conjunction with products intended for 

Guided Bone Regeneration (GBR) 

Handling: The structure of NuOss aids in particulate hydration and delivery of the 

product to the defect. 

Particle Distribution: NuOss maximizes the distribution of the preferred particle 

sizing within desired ranges. 

Particle Structure and Porosity: NuOss maintains the high porosity and trabecular 

structure of natural mineralized bone and maximizes the potential for angiogenesis. 1 

Holds together 

when hydrated for 

improved handling. 

NuOss ® 50x magnification 

Bio-Oss ® 50x magnification 

Cancellous Granules 

Number Description Particle Size Vial Volume 

509-9001 NuOss Cancellous Granules 250-1000 mic. .25gram / 0.6cc 

509-9002 NuOss Cancellous Granules 250-1000 mic. 0.5gram / 1.2cc 



Large Particle Cancellous Granules 



Cortical Granules 

509-1001 NuOss Cortical Granules 500-1000 mic. .25gram / 0.4cc 

509-1002 NuOss Cortical Granules 500-1000 mic. 0.5gram / 0.8cc 



1. Klenke FM, Liu Y, Yuan H, Hunziker EB, Siebenrock KA, Hofstetter W. Impact of pore size on the 

vascularization and osseointegration of ceramic bone substitutes in vivo. J Biomed Mater Res A. 

2008 Jun 1;85(3):777-86. 

NuOss ® is a registered trademark of ACE Surgical 

NuOss ® is manufactured for ACE Surgical by Collagen Matrix, Inc., Oakland, NJ USA 

BioOss ® is a registered trademark of ED. GEISTLICH SOHINE AG.



9 

NuOSS DS - CANCELLOUS GRANULES 

IN A PRELOADED DELIVERY SYRINGE 

NuOss cancellous xenograft particulate is available packaged sterile in a pre-loaded 

delivery syringe for ease of product placement. 

NuOss natural cancellous (spongiosa) bone matrix is produced by the removal of all 

organic components from bovine bone. Due to its natural porous structure, NuOss is 

physically and chemically comparable to the mineralized matrix of human bone. 

Handling: The structure of NuOss aids in particulate hydration and delivery of the product 

to the defect. 

Particle Distribution: NuOss maximizes the distribution of the preferred particle 

sizing within desired ranges. 

Delivery: The pre-loaded NuOss delivery syringe makes it easier to hydrate and place the 

graft material, minimizing preparation time and particulate migration at the surgical site. 

delivery syringe 

Number Description Particle Size Volume 

509-9025 NuOss DS Delivery Syringe 250-1000 mic. 0.25cc 

509-9050 NuOss DS Delivery Syringe 250-1000 mic. 0.50cc 

NuOSS PLUG - ANORGANIC 

BOVINE BONE WITH COLLAGEN 

Just like NuOss granules, NuOss Plug combines the mineral properties of 

cancellous particulate with the space maintenance of collagen. This highly 

manageable combination provides a convenient approach to filling periodontal 

and maxillofacial defects. With NuOss Plug, there is no mixing or 

loose handling. 

NuOss Plug contains low heat processed anorganic bone that will remodel and 

support placement of an implant within, on average, 6-9 months. NuOss Plug is 

easy to place and prevents particulate migration once placed into the surgical site. 

Number Description Shape Size 

509-4001 NuOss Plug Tapered 9 x 15mm 

509-4002 NuOss Plug Straight 10 x 20mm 

NuOSS COLLAGEN 

Just like NuOss granules, naturally structured xenograft NuOss Collagen 

Block combines the mineral properties of cancellous particulate with the 

space maintenance of collagen. This highly manageable combination 

provides a convenient approach to filling periodontal and maxillofacial 

defects. With NuOss Collagen Block, there is no mixing or loose handling. 

NuOss Collagen is recommended for: 

• Elevation of the maxillary sinus floor 

• Filling of infrabony periodontal defects 

• Augmentation or reconstructive treatment of the alveolar ridge 

• Filling of defects after root resection, apicoectomy, and cystectomy 

• Filling of extraction sockets to enhance preservation of the alveolar ridge 

• Filling of periodontal defects in conjunction with products intended for 

Guided Tissue Regeneration (GTR) and Guided Bone Regeneration (GBR) 

• Filling of peri-implant defects in conjunction with products intended for 

Guided Bone Regeneration (GBR) 

Number Description Block Size 

509-9100 NuOss Collagen 6 x 7 x 8 mm (100mg approx.) 



Without 

Hydration 

Hydrated 

NuOss ® is a registered trademark of ACE Surgical 

NuOss ® is manufactured for ACE Surgical by Collagen Matrix, Inc., Oakland, NJ USA


10 


resorbable collagen membrane 

conFORM RESORBABLE COLLAGEN MEMBRANE 

conFORM is a resorbable collagen membrane matrix made from Type I 

bovine collagen. Its pliable characteristics and predictable resorption time of 

3-4 months make it an ideal membrane for guiding the healing of bone and 

surrounding tissue. When hydrated, conFORM will naturally adapt to surgical 

defects and maintain a high tensile strength, which makes it the ideal 

membrane for suturing. 

With its in vivo stability, permeability and mechanical strength, conFORM is 

a reliable choice for various clinical applications. When used in conjunction 

with a bone grafting particulate, conFORM can help mitigate the migration 

of the particulate from the surgical site. Its resorbability eliminates the need 

for surgical removal. conFORM is packaged sterile, non-pyrogenic, and for 

single use. 

Shown Actual Size 

Typical Uses 

• Ridge augmentation 

• Bone regeneration around implants 

• Sinus lift 


• Apical root resection 

• Extraction sites 

Features 

• White, non-friable membrane matrix engineered from highly purified Type I 

Collagen 

• Fully resorbable with a predictable resorption time of 3-4 months* 

• Guides healing and regeneration of bone and surrounding tissue 

• Unique fiber orientation provides high tensile strength for in situ stability of 

membrane 

• Cell occlusive, designed to retard and/or prevent epithelium down growth 

Advantages 

• Conforms to surgical site without re-shaping 

• Easy to handle, does not adhere to itself 

• Sufficient resorption time for sustained function in bone repair 

• Can easily be trimmed during surgery for a final fit 

• May be placed with either side against the tissue or bone 

509-1520 conFORM Resorbable Collagen Membrane 15 x 20mm 



conFORM is manufactured for ACE Surgical by Collagen Matrix, Inc., Oakland, NJ USA 

* Reference: 1. D.Yuen, J. Ulreich, G. Zuclich, H-B. Lin and S-T Li “Prediction of In Vivo 

Stability of a Resorbable, Reconstituted Type I Collagen Membrane by In Vitro Methods.” 

2000 Society for Biomaterials - Sixth World Congress. 

15 x 20mm 20 x 30mm 30 x 40mm



11 

RCM 6 RESORBABLE COLLAGEN MEMBRANE 

RCM6 Resorbable Collagen Membrane allows you to guide healing and 

regeneration of bone and surrounding tissue within your time frame. RCM6 is 

intended to aid in the wound healing process within oral surgical procedures, 

such as dental implants, bone defects, periodontal defects and ridge 

augmentations. When used in conjunction with a bone grafting particulate, 

RCM6 can help mitigate the migration of the particulate from the surgical site. 

RCM6 is packaged sterile, non-pyrogenic, and for single use. Its resorbability 

eliminates the need for surgical removal. 

resorbable collagen membrane 

Typical Uses 

• Ridge augmentation 

• Bone regeneration around implants 

• Sinus lift 


• Apical root resection 

• Extraction sites 

Features 

• White, non-friable membrane matrix engineered from highly purified 

Type I Collagen 

• Fully resorbable with a resorption time of up to 6 months 

• Guides healing and regeneration of bone and surrounding tissue 

• Unique fiber orientation provides high tensile strength for in situ stability 

of membrane 

• Cell occlusive, designed to retard and/or prevent epithelium down growth 

Advantages 

• Long resorption time, for sustained function in bone repair 

• High mechanical strength for membrane stabilization 

• Each piece can be easily trimmed during surgery for a final fit 

• May be placed with either side against the tissue or bone 

Resorption Comparison * 

BioGide ® 1 

BioMend ® Extend 1 

RCM 6 2 

Weeks = 0 4 8 12 16 20 24 28 32 36 

* Approximate in vivo resorption time. 

1 

Reported from the product’s instructions for use. 

2 

Data on file with ACE Surgical Supply Co., Inc. 

Shown Actual Size 

509-6000 RCM 6 Resorbable Collagen Membrane 15 x 20mm 



RCM6 ® is a registered trademark of ACE Surgical 

RCM6 ® is manufactured for ACE Surgical by Collagen Matrix, Inc., Oakland, NJ USA 

BioMend ® Extend is a registered trademarks of Zimmer Dental. 

BioGide ® is a registered trademark of ED. GEISTLICH SOHINE AG. 

15 x 20mm 20 x 30mm 30 x 40mm


12 


RESORBABLE COLLAGEN PLUG, FOAM and TAPE 

• Provides an excellent matrix to assist in wound healing 

• Beneficial in protecting the wound site 

• Controls minor bleeding due to the intrinsic hemostatic properties 

of collagen fibers 

resorbable collagen plug 

Resorbable Collagen Features Plug Foam Tape 

Fully resorbable • • • 

Ideal for applications in oral wounds • • • 

Provides an excellent matrix to assist in wound healing • • • 

Protects the oral wound bed • • • 

Ideal for extraction sockets 

Controls minor bleeding due to the intrinsic hemostatic 

properties of collagen fibers 

• 

• • • 

resorbable collagen foam 

A 

resorbable collagen tape 

B 

RCP RESORBABLE COLLAGEN PLUG 

A 509-4000 RC-Plug, Sterile 1cm x 2cm 10/box 

B 

C 

RCF RESORBABLE COLLAGEN FOAM 

509-2000 RC-Foam, Sterile 2cm x 4cm, 3mm thick 10/box 

RCT RESORBABLE COLLAGEN TAPE 

509-1000 RC-Tape, Sterile 2.5cm x 7.5cm, 1mm thick 10/box 

RC Plug, RC Foam, and RC Tape are manufactured for ACE Surgical 

by Collagen Matrix, Inc., Oakland, NJ USA 

C


Bone And Membrane Fixation 

13 

TITANIUM MICRO MESH 

Customizable Titanium Mesh for Guided Bone Regeneration 

• Manufactured from commercially pure titanium (6Al-4V ELI), 

perforated, non-sterile 

• Can be secured with ACE TruFIX Self-Drilling bone screws 

• Trim to size using Smith Wire Cutting Scissors (page 39) 

A 003-9429 Titanium Micro Mesh, 34 x 25mm .1mm thick 

B 003-9430 Titanium Micro Mesh, 120 x 60mm .1mm thick 

C 003-9433 Titanium Micro Mesh, 152 x 66mm .2mm thick 

D 

E 

003-94501 Titanium Micro Mesh, 98.5 x 77.5mm .6mm thick 

003-94701 Titanium Micro Mesh, 98.5 x 77.5mm .2mm thick 

A 

E 

Mesh inset images 

are enlarged 400% 

B 

Recessed holes in mesh D and 

E are compatible with ø3mm 

heads of the ACE TruScrew. 

Holes will accept screws up to 

a 2mm thread diameter. 

Outlines all shown 

100% actual size 

C 

D 

Mesh inset images are enlarged 400% 

F G H I 

F 

G 

H 

I 

TITANIUM TENTING MESH 

Pre-Shaped Titanium Mesh for Guided Bone Regeneration 

• F G H feature a 12 point center locking design, which supports 

the connection on top of standard 2.7mm External Hexagon Implants 

and ACE Tenting Screws 

• Manufactured from commercially pure titanium (6Al-4V ELI), 

perforated, non-sterile 

• Can be secured with ACE TruFIX self-drilling bone screws 

003-9434 7 x 14mm Tenting Mesh .2mm thick 


003-9442 13 x 33mm Custom Tenting Mesh .2mm thick 


Tenting Mesh all shown 100% actual size

14 


A Complete Fixation System 


TRUFIX FIXATION SYSTEM 

The All-In-One Bone Fixation and Membrane Stabilization Solution 

The TruFIX System from ACE Surgical Supply provides you with everything you need 

for both bone fixation and membrane stabilization. This system incorporates all the 

necessary components to pick up and drive the ACE TruSCREW and TruTACK. 

The TruFIX system eliminates the need for multiple systems and unnecessary 

components, making it user-friendly for your practice. 

• True centered patented locking connection 

• True axial alignment with pickup each time 

• TruSCREW self-drilling screw developed for easy insertion with maximum fixation 

• TruSCREW Patented Removal Sleeve for disengaging the screw from the driver 

without damaging screw head 

• TruTACK hexagon driver head and barbed tip to pierce without drilling for simple 

tack insertion and easy screw-like removal 

The TruSCREW, with its aggressive cutting flutes, is the ideal bone screw for the 

fixation of small bone within the oral and maxillofacial environment. These cutting 

flutes (in most instances) eliminate the need for any pre-drilling. The patented 

design of the screw ensures an effortless insertion into all types of bone. 

The TruTACK makes the stabilization of membranes quick and trouble-free. 

Our unique tack incorporates a hexagon on its head and threads on its shaft, 

allowing for easy removal. The TruTACK is placed like a tack and removed like 

a screw, a feature that you will not find in any other system. 

System Includes: 

A 454-19001 

B 454-17001 

C 454-15001 

C 454-17901 

D 454-15201 

E 454-40203 

truFIX Driver Handle, 98mm (3.875”) long 

truTACK Driver Tip (includes Tip Cover) 

truSCREW Driver Tip 

truSCREW Driver Removal Sleeve 

truSCREW Driver Tip, Contra-Angle 

2-Step Countersink Bur, (.8 and 1.6mm), Contra-Angle 

F 454-40202 1.1mm Pilot Twist Drill, 29.8mm 

G 50-27-00045 Pilot Bur, 0.45mm, 27mm Length, Contra-Angle 

H 20-1577-02 0.88mm External Hex Hand Driver 

I 454-50201 truSCREW Packaging Removal Tool 

454-18501 truFIX Tray 

J 

454-18015 truFIX Complete Fixation System 

TruFIX Small Driver Handle (sold separately) 

This smaller, thinner, and lighter handle is often preferred by surgeons 

with smaller hands. 

454-19501 Optional Small Driver Handle, 89mm (3.5”) long 

The TruFIX driver’s 

true-centered 

locking connection 

holds the TruSCREW 

securely. 

The removal sleeve disengages 

the driver from the screw without 

compromising the screw or the 

stability of the graft. 

B 

A 

C 

D 

Handles shown actual size. 

J 

E F G 

H 

I

TruTACK, TruSCREW AND TruTENT 


Bone Tacks, Self Drilling Bone Screws and Tenting Screws 


Patented spline 

driver recess 

15 

Smooth beveled seating neck 

High strength surgical grade 

titanium alloy (6Al-4V ELI) 

Hex head driver 

High strength surgical grade 

titanium alloy (6Al-4V ELI) 

Collar available in 3 different 

heights (6mm shown) 

1.6 mm collar thickness 

Smooth beveled seating neck 

Thread for easier removal 

Self-drilling thread design 

Tapered thread for strength 

Anchor collar to grab 

and secure tack in place 

Barbed tip to pierce 

without pre-drilling 

A truTACK B truSCREW C truTENT TENTING SCREW 

Full form thread for 

maximum stability 

Twin-offset cutting flutes 

for quick and easy insertion 

Pin point tip for 

tissue penetration 

A truTACK 2.5mm Head Diameter Sterile, 10/package 

3.0mm 0.7mm Thread Ø 96-003-13 – 

5.0mm 0.7mm Thread Ø 96-003-14 – 

B truSCREW 3mm Head Diameter Sterile, 5/package 

Total Length 1.2mm Thread Ø 1.5mm Thread Ø 2.0mm Thread Ø 

4.5mm 454-27202 – – 

6.0mm 454-27203 454-27502 454-28002 

7.5mm 454-27204 454-27503 454-28003 

9.0mm 454-27205 454-27504 454-28004 

10.5mm 454-27206 454-27505 454-28005 

12.0mm – 454-27506 454-28006 

13.5mm – 454-27507 454-28007 

15.0mm – 454-27508 454-28008 

C truTENT Tenting Screw 5mm Head Diameter Sterile, 1/pkg 

Total Length Collar Height 1.5mm Thread Ø 

10.0mm 4mm 454-391001 – 

12.0mm 6mm 454-391002 – 

14.0mm 8mm 454-391003 – 

ruTENT 

Self Drilling Tenting Screw System 

Self Drilling Bone Screw System 

Self Drilling Bone Screw System


16 

Surgical Instruments 

A 

B 

SINUS LIFT KIT 

Tray Included. All instruments may be purchased separately 

C 

D 

E 

F 

G 

H 

A 

003-4194 Sinus Lift Kit (Set of 6 with tray) 

B 

C 

D 

E 

F 

G 

H 

Kit Includes: 

765-1050 Autoclavable Tray 

03-110-88 Shepherd Sinus Lift Retractor 18cm (7”) 

03-110-23 Freer Periosteal Elevator, strong curve 19cm (7-1/2”) 

03-110-77 #3 Clepper Tatum Antralplasty Elevator, DE 16.5cm (6-1/2”) 

10-002-36 #1 Sinus Lift Curette, standard bend, DE, 3mm/5mm 19cm (7-1/2”) 

10-002-37 #2 Sinus Lift Curette, severe bend, DE, 3mm/5mm 16.5cm (6-1/2”) 

714-0243 Depth/Packing Gauge, DE, Titanium 16.5cm (6-1/2”) 

markings at 8-10-13-15-18mm, 3.3/4mm ends 

ELEVATOR KITS 

Antralplasty Elevator Kit for Sinus 

and Socket Lift Procedures 

Designed for exploring and walking antral floor in displaced root tip removal 

Instruments have dulled edges to prevent tearing of the membrane 

I 

J 

K 

L 

M 

I 

J 

K 

L 

M 

E 

Antralplasty Elevator Kit 

All kit instruments sold separately 


10-002-25 #1 Antral Curette, DE 16.5cm (6-1/2”) 

10-002-34 #3 Antral Curette, DE 14.5cm (5-3/4”) 


10-002-33 #2 Antral Curette, DE 15cm (6”) 


F 

G 

E 

Sinus Lift Elevator Kit 

00-002-30 Sinus Lift Elevator Kit (Includes F, G and E) 

Kit Includes: 

10-002-36 #1 Sinus Lift Curette, standard bend, DE, 3mm/5mm 19cm (7-1/2”) 

10-002-37 #2 Sinus Lift Curette, severe bend, DE, 3mm/5mm 16.5cm (6-1/2”) 

03-110-77 #3 Clepper Tatum Antralplasty Elevator, DE 16.5cm (6-1/2”)



17 

FINAL 

STEP 

FINAL 

STEP 

SITE DILATOR KIT 

• Convex Tip Design - See Detail 

454-3000 Site Dilator Kit (Set of 11 dilators with tray) 

Kit Includes: 


454-3001 Site Dilating Osteotomes, Step 1.6 mm/2.0 mm 






454-3701 Site Dilating Osteotomes, Final 2.8 mm, Final 

454-3301 Site Dilating Osteotomes, Final 3.3 mm 




SINUS LIFT OSTEOTOME KIT 

• Concave Tip Design - See Detail 

454-5000 Sinus Lift Osteotome Kit (Set of 11 with tray) 

Kit Includes: 


454-5001 Sinus Lift Osteotome, Step 1.6 mm/2.0 mm 






454-5701 Sinus Lift Osteotome, Final 2.8 mm 





Also Available, Not Included in the Kit 



OFFSET OSTEOTOME KIT 

• Concave Tip Design - See Detail 

454-2000 Offset Osteotome Kit (Set of 7 osteotomes with tray) 

Kit Includes: 


454-2001 Offset Sinus Lift Osteotome, Step 1.6 mm/2.0 mm 




454-2401 Offset Sinus Lift Osteotome, Final 2.8 mm 



Also Available, Not Included in the Kit 





18mm 

15mm 

13mm 

10mm 

8mm 

Convexed 

surface 4mm 

from tip 

Convexed Tip 

CONVEX TIP DETAIL 

All dilators and 

ossteotomes are 

15cm (6”), 

shown here 

actual size. 

All dilators, 

ossteotomes, 

and trays may 

be purchased 

separately. 

18mm 

15mm 

13mm 

10mm 

8mm 

Sharply honed 

cutting surface 

4mm from tip 

Concaved Tip 

CONCAVE TIP DETAIL


18 


15mm 

13mm 

11.5mm 

10mm 

8mm 

Before 

After 

RIDGE EXPANDING KIT 

• Discover a safe, controllable way to widen a thin 

questionable ridge to one capable of accommodating an 

implant up to 4.5mm without compromising cortical bone. 

• The slowly revolving dilators of increasing diameter gently 

widen the bone in a risk free procedure to the exact depth 

and direction of the final implant. 

• After each dilator is inserted, allow 30-60 seconds before 

removing it. This allows time for the elasticity of the bone 

to respond. 

• Laser markings provide accurate guidance for the placement 

of implants into the newly expanded ridge. 

055-60000 Ridge Expanding Kit (Set of 4 with surgical kit) 

Kit Components Individually: 

055-60201 2.5mm Bone Expander 




04-9734-01 Connection Driver Tool (Hex), for CA Handpiece 

96-002-28 Universal Ratchet 

20-1558-11 Driver Extender (Hex) 

96-004-49 Square Titanium Bowl 

20-1950-12 Autoclavable Tray 

SIMPLIFYING THE TREATMENT 

OF ATROPHIC MAXILLARY OR 

MANDIBULAR RIDGES 

This technique takes advantage of the innate elasticity and flexibility of bone. Through a series of progressively 

wider expanders, SLOW, STEADY pressure is created as the expander advance expands the alveolar bone 

without raising a complete flap, allowing an implant to be placed with minimal ridge splitting. 

The procedures and techniques presented throughout this catalog are intended to provide basic reference only and should not be substituted for the complete surgical procedure being performed by a licensed 

practitioner. A complete understanding and execution of the techniques and procedures presented within this catalog are the full responsibility of the licensed practitioner. These procedures and techniques are 

NOT TO BE SUBSTITUTED for the practitioner's complete knowledge, education, experience or for any instrument or product instructions for use.



19 

RIDGE EXPANDING CHISEL KIT 

• All Ridge Expanding Chisels are 15cm, 6” 

• All chisels and tray may be purchased separately. 

454-4700 Ridge Expanding Chisel Kit (Set of 4 w/tray and handle) 

Kit Includes: 

454-4701 3.0 mm Ridge Chisel 




765-1090 Tray 

454-1501 Chisel Handle (Uses 1.25mm Hex Driver) 

SINGLE STAGE RIDGE SPLIT 

2 

1 3 

4 

5 6 7 

Thin anterior maxillary 

ridge requiring expansion. 

An initial incision and flap 

reflection is made to allow 

access to the ridge. 

Small diameter pilot drill 

is introduced to mark 

implant site. 

(Option for Soft Bone) An 

initial crest osteotomy can 

be started with an ACE 

Mini Blade (786-6400). 

Vertical osteotomy cuts performed with Ridge 

Expanding Chisel through the buccal cortex in an 

oblique fashion followed by horizontal osteotomy 

at ridge crest. 

ACE Site Dilator can 

be used to prepare the 

expanded osteotomy for 

implant placement. 

Implant osteotomy site is 

completed using chosen 

implant protocols. Implant in 

place; labial ridge preserved. 

Reference Article: Palti A. Ridge Splitting and Implant Techniques for the Anterior Maxilla. Dental Implantology Update 2003; Volume 14, Number 4. 

The procedures and techniques presented throughout this catalog are intended to provide basic reference only and should not be substituted for the complete surgical procedure being performed by a licensed 

practitioner. A complete understanding and execution of the techniques and procedures presented within this catalog are the full responsibility of the licensed practitioner. These procedures and techniques are 

NOT TO BE SUBSTITUTED for the practitioner's complete knowledge, education, experience or for any instrument or product instructions for use.

20 



B C 

D E 

A 

B 

C 

D 

E 

BONE SPREADER OSTEOTOME KIT 

• Designed for taking chin and ramus monocortical block grafts. 

• Single end handle can be tapped with a mallet. 

• Markings at 13mm, 16mm and 19mm. 

• D-contoured tips to avoid fracturing weaker boney wall. 

• Instruments and tray are made from surgical grade stainless steel. 

454-2106 Osteotome Bone Spreaders for Bone Grafting with mallet and tray 

Osteotomes and Accessories available separately 

454-2102 Osteotome Bone Expander 4.3mm 27mm Scoop 




64-003-12S Surgical Mallet, Stainless Steel (shown in kit) 6-1/2” (16.5cm) 

94-000-36 Instrument Tray with supports and 1 retainer 175 x 140 x 24mm 

A 

Especially designed for taking Chin and 

Ramus monocortical block grafts. 

BONE SPREADER OSTEOTOMES 

In Use: Here the Bone Spreader Osteotome is in place, separating the block 

graft from the ramus on the mandible. The site was prepared and the crest 

burnished. The crest is then perforated to outline the graft using a .75mm 

round bur. The outline should be 4-5mm medial from the buccal plate. The 

length of the graft is determined using a caliper. A 702L bur is used to connect 

the perforations to the length of the graft. Vertical anterior and posterior cuts 

are made with the 702L bur 10-12mm in length. At the vertical depth, the 

buccal plate is scored using a #8 round bur. The block graft is out-fractured 

using the bone spreader osteotome.



21 

REUSABLE BONE SCRAPERS 

• The tool for simple and fast recovery of allogenic bone grafts. 

• Made of surgical-grade stainless steel, 

free of biocompatibility hazards 

• Easy to clean and sterilize 

• Reusable, cutting blade can be replaced 

Bone Scraper, Straight 

398-95700 Bone Scraper, Straight, Stainless Steel, with 1 Blade 

398-95701 Replacement Blade for 398-95700 

Bone Scraper, Angulated 

398-95900 Bone Scraper, Angulated, Stainless Steel, with 1 Blade 

398-95901 Replacement Blade for 398-95900 

BONE CRUSHER 

• Insert the bone piece into the crusher and use the pestle in order to crush 

the bone. If necessary, you may additionally use a mallet. 

• Stainless steel 

• Crushing surface: 20mm 

96-000-50 Bone Crusher 

GRAFT DELIVERY SYRINGES 

• With Funnels 

• Stainless Steel 

98-000-35 Graft Delivery Syringe, 3.5mm Opening Curved 


96-000-25 Graft Delivery Syringe, 5.0mm Opening Straight 


3.5mm tip 4.5mm tip 5.0mm tip 6.0mm tip 7.0mm tip

22 



A 

A 

GRAFTING INSTRUMENTS 

Bone Graft Holding Forceps 

96-000-26 Bone Graft Holding Forceps 20cm (8”) 


C 

B 

B 

C 

Kuehne Membrane Holding Forceps 

96-003-22 Kuehne Forceps, Angled, w/o Lock 10.5cm, (4-1/4”) 

96-003-24 Kuehne Forceps, Straight, w/Lock 10.5cm, (4-1/4”) 

96-003-26 Kuehne Forceps, Straight, w/o Lock 10.5cm, (4-1/4”) 

Membrane Placement Instrument 

D 03-001-39 ACE Buser Type Elevator 18cm (7”) 

D 

E 

F 

G 

E 

F 

G 

STEP PILOT DRILLS 

• Ideal for Use In Lag Screw Placement. 

454-44501 HP, SS, 48mm, (0.81, 1.6, 2.1mm) 3 step 

454-44001 CA, SS, 30mm, (0.81, 1.6, 2.1mm) 3 step 

454-281001 CA, SS, 30mm, (0.8, 1.6mm) 2 step 

DRILL GUIDE PARALLELING SYSTEM KIT 

• Assures parallelism between multiple osteotomies 

• For parallel drilling of two or more osteotomies 

• Drill guide holes are marked every two millimeters for drilling 

8, 10, 12, 14, 16, 18 or 20mm 

• Paralleling pins machined with a precision 4.0mm outer diameter to 

friction-lock with the drill guides 

• Assemble drill guide using paralleling pins to achieve parallel drilling 

around or across the entire arch 

• Drill guide distances are laser marked for easy identification 

• A machined cross-hole in the center of the pins can be used with dental 

floss to prevent the pin from being dropped during delivery and/or 

removal from the oral cavity 

• Drill guides are precision machined from titanium alloy (Ti-6Al-4V ELI) 

20-9730-00 Drill Guide Paralleling System Kit 

Kit Includes: 

20-9732-01 2.8mm Threaded Paralleling Pin 

20-9730-02 2.0/2.8mm Straight Paralleling Pins (4) 

20-9770-01 Paralleling Drill Guide, 8mm 



12-37-0020 2mm Twist Drill (not sold separately) 

765-1030 Autoclavable Tray



23 

MISCH RAMUS RETRACTORS 

Unique design to retract tissues of the posterior mandible in preparation for 

obtaining graft from lateral mandibular external oblique ridge. 

A 05-020-56 Right, Curved Down 21cm (8-1/2”) 

B 05-020-57 Left, Curved Down 21cm (8-1/2”) 

B 

BONE HARVESTING INSTRUMENTS 

Chisels for Harvesting Bone from the Mandible 

• Start with a #701 Taper Fissure Bur 

• Retrieve bone graft with ACE Osteotomy Chisel (05-010-18). 

• Specially angled and contoured to elevate unicortical grafts. 

C 05-012-20 5mm Chisel, Flat, 45° Angle 15cm (6”) 

A 

D 

E 

SPATULA OSTEOTOMES 

05-000-10 4mm x 30mm 15cm (6”) 

05-000-11 5mm x 35mm 15cm (6”) 

C 

D 

E 

F 

G 

H 

MALLETS 

Surgical Mallet 

64-003-12S Surgical Mallet, SS 16.5cm (6-1/2”) 

Mead Mallet 

64-003-07 Mead Mallet, with 2 Plastic Facings 20cm (8”) 

Replacement Facings for Mead Mallet 

64-003-05 Replacement Mallet Facings, Mead Sold Individually 

F 

G 

H


24 


B 

A 

PERIOTOME HANDLE & BLADES KIT 

• Periotome is used to remove ligament attachment from the root of the tooth 

and the alveolar housing. 

• Single end handle can be tapped with a mallet or used with hand pressure. 

• Components can be purchased separately. 

344-1770 Periotome Kit complete 

C 

D E F G 

B 

C 

D 

E 

F 

G 

H 

Periotome Blades and Accessories available separately 

16-9010-01 Single end Periotome handle only 15cm (6”) 

344-1651 P3, 1.5mm, Angled 4.5cm (1.75”) 

344-1631 P1, 2mm, Straight 4cm (1.5”) 

344-1641 P2, 1.5mm, Straight 4cm (1.5”) 

344-1691 2.5mm, Straight, Semi Rigid 4cm (1.5”) 

344-1661 Arrow Shape Periotome 4.9cm (1.8”) 

64-003-12S Surgical Mallet, Stainless Steel (shown in kit) 16.5cm (6.5”) 

344-1665 Periotome Blade Storage Holder, holds 6 blades 15.2cm (6”) 

94-000-36 Instrument Tray with supports and 1 retainer 175 x 140 x 24mm 

A 

H 

In Use: Periotome is removing the ligament 

attachment from the root of the tooth and 

the alveolar housing. 

Blade Storage Holder: Stands up for easy access during procedures and 

folds flat for sterilization and storage. Holds 6 blades (sold separately).



25 

PERIODONTAL LIGAMENT/LUXATING ELEVATOR KIT 

• Single end handle can be tapped with a mallet. 

• Instruments and tray are Stainless Steel. 

A 

454-7111 Periodontal Ligament/Luxator Elevator Kit, with mallet and tray 

Periotome Blades and Accessories available separately 

B 

C 

D 

E 

F 

454-7701 Periodontal Ligament/Luxator Elevator, Brown Angled “OUT” 

454-7901 Periodontal Ligament/Luxator Elevator, Green Curved “OUT” 

454-7401 Periodontal Ligament/Luxator Elevator, Blue Straight 2.5mm 

454-7501 Periodontal Ligament/Luxator Elevator, Red Arrow Tip 

454-7601 Periodontal Ligament/Luxator Elevator, Gold Angled “IN” 

64-003-12S Surgical Mallet, Stainless Steel (shown in kit) 16.5cm (6-1/2”) 

94-000-36 Instrument Tray w/supports and retainer 175 x 140 x 24mm 

B 

C 

D 

E 

F 

A 

In Use: Straight Blade Periotome 

(blue handle 454-7401) is 

removing the ligament attachment 

from the root of the tooth and the 

alveolar housing. 

In Use: The Angled IN Periotome 

(gold handle 454-7601) is used 

to loosen and remove difficult or 

impacted 3rd molars. 

Developed in conjunction with Dr. Michael Zide, Fort Worth, TX


26 


TISSUE PUNCH SIZE CHART 

A 

1.5mm 2mm 2.5mm 3mm 

3.5mm 4mm 5mm 6mm 

REUSABLE TISSUE PUNCHES 

• Provides a precise easy method of soft tissue removal to insure positive 

seating of healing abutments. 

• Diameter of instrument is designed to extend over the implant for 

simplified tissue removal. 

• Can be used for tissue biopsies. 

• Honed cutting edge. 

• Hand-held 

• Surgical grade stainless steel 

C 

B 

A Long Handle Straight Tissue Punches 

90-000-03 ø3mm Long Handle, Straight 10cm (4”) each 



B Long Handle Angled Tissue Punches 

90-000-60 ø3mm Long Handle, Angled 10cm (4”) each 

90-000-80 ø4mm Long Handle, Angled 10cm (4”) each 

C Short Handle Half Cut Tissue Punches 

20-1785-01 ø3.5mm Short Handle, Half Cut 1-1/4” (3cm) each 

20-1785-02 ø4mm Short Handle, Half Cut 1-1/4” (3cm) each 



INTEGRA DISPOSABLE BIOPSY PUNCHES 

• Sterile • Single Use • Plastic Handle 

Long Handle Disposable Biopsy Punches 

D 

D 

3331AA ø1.0mm Long Handle Disposable 10cm (4”) 50/pkg 

3331A ø1.5mm Long Handle Disposable 10cm (4”) 50/pkg 

3331 ø2mm Long Handle Disposable 10cm (4”) 50/pkg 


3333 ø3.5mm Long Handle Disposable 10cm (4”) 50/pkg 





3338 Assortment: 10 each of 2, 3, 4, 5, 6mm 10cm (4”) 50/pkg 

Short Handle Disposable Biopsy Punches 

E 

E 

3333SH ø3.5mm Short Disposable 1-1/16” (2.7cm) 50/pkg 

3334SH ø4mm Short Disposable 1-1/16” (2.7cm) 50/pkg 



K 

J 

F 

G 

H 

I 

CONTRA ANGLE TISSUE PUNCHES 

92-000-02 ø2mm Mucosa Punch, for CA 1” (25mm) each 


92-000-01 ø3.5mm Mucosa Punch, for CA 1” (25mm) each 




Tissue Punches Driver 

F 

G 

H 

I 

J 

K 

20-1550-01 Thumb Knob each 

20-1554-11 Ratchet Extension each 

Complete Set of Mucosa Tissue Punches 

L 

• Includes 6 Punches (above) 

• Plus Ratchet Extension, Thumb Knob (see inset) and Delrin Tray 

L 

92-000-20 Complete Set of Mucosa Tissue Punches Set of 6



27 

A 

BOLEY GAUGES 

08-000-10 Boley Gauges, 0-100mm 14cm (5-1/2”) 

A 

B 

BONE MEASURING CALIPERS 

08-000-59 Ridge Mapping Caliper, 0-25mm 15cm (6”) 

B 

C 

DEPTH PACKING GAUGE 

• For use with 3.3mm, 3.75mm and 4.0mm self-tapping implants. 

• Contoured ends allow use as packing instrument; especially 

useful in sinus elevation procedures. 

• 8, 10, 13, 15, 18mm markings. 

• Titanium (6Al-4V-ELI). 

714-0243 Depth Packing Gauge, DE 18cm (7”) 

C 

D 

LACRIMAL PROBES 

Bowman – Standard 

61-225-40 Size 0000-000, Sterling 13cm (5”) 






D 

Bowman Probe Tip Detail: No Bulb 

Williams 







Williams Probe Tip Detail: with Bulb 

E 

STAINLESS STEEL RULERS 

08-000-03 Stainless Steel Ruler 1.2cm x 10cm (1/2” x 4”) each 

08-000-11 Stainless Steel Ruler 1.2cm x 15cm (1/2” x 6”) each 

E 

F 

PLASTIC RULER 

• Standard and metric increments 

• Cold sterilization only 

003-2937 Plastic Ruler 2.3cm x 15cm (7.8” x 6”) 10/pkg. 

F 

All instruments Stainless Steel unless noted.

28 



A 

B 

C 

A 

B 

C 

D 

E 

F 

G 

H 

RONGEURS 

10-000-09 Standard Blumenthal Rongeur, 30° Angle 15cm (6”) 

10-000-34 Friedman Rongeur 14cm (5-1/2”) 

10-000-35 Mini Friedman Rongeur 13cm (5”) 

10-100-36 Micro Friedman Rongeur 14cm (5-1/2”) 

10-000-01 #1 Rongeur 16.5cm (6-1/2”) 

10-000-21 #4 Cleveland Rongeur 14cm (5-1/2”) 

10-000-18 Rongeur Luer 4mm Cup 15cm (6”) 

10-000-25 Rongeur Universal Side Cutting 15cm (6”) 

10-000-43 Beyer Double Action Rongeur 18cm (7”) 

10-000-75 Kerrison Rongeur, 3.5mm Bite, 4" Shaft 14.5cm (5-3/4”) 

D 

G 

H 

E 

F 

L 

K 

I 

J 

O 

M 

N 

I 

J 

K 

L 

ROOT ELEVATORS 

63-000-04 #301 Apexo 15cm (6”) 

63-000-08 #303 Apexo 15cm (6”) 

63-000-14 #34 Seldin 15cm (6”) 

63-001-40 #34S Seldin 15cm (6”) 

63-150-15 #34S Seldin, Serrated 15cm (6”) 

63-000-18 #8 Crane Pick 15cm (6”) 

63-000-11 #46R Heidbrink Elevator 15cm (6”) 

63-000-59 #71 Miller Apexo 15cm (6”) 




63-000-63 #6X Potts, T-Bar Handle 15cm (6”) 

63-000-64 #7X Potts, T-Bar Handle 15cm (6”) 

Heidbrink Root Tip Pick 

M 

N 

63-001-13 #1 16.5cm (6-1/2”) 

63-001-14 #2 16.5cm (6-1/2”) 

63-001-15 #3 16.5cm (6-1/2”) 

63-001-18 #13/14 19cm (7-1/2”) 

Double Ended Root Tip Elevator 

O 

63-151-30 Serrated, Double Ended 19.5cm (7-3/4”)



29 

A 

B 

C 

D 

E 

F 

SURGICAL SCISSORS 

40-000-01 #9 Dean, Smooth 16.5cm (6-1/2”) 

40-150-02 #9 Dean, Serrated 16.5cm (6-1/2”) 

40-052-01 #9 Dean, Serrated, Tungsten Carbide 17cm (6-3/4”) 

40-010-19 #17 Iris, Delicate, Straight 11.5cm (4-1/2”) 

40-020-20 #18 Iris, Delicate, Curved 11.5cm (4-1/2”) 

40-010-21 Iris, Very Delicate, Straight 10cm (4”) 

40-020-22 Iris , Very Delicate, Curved 10cm (4”) 

40-052-10 Iris, Straight, Tungsten Carbide 11.5cm (4-1/2”) 

40-052-11 Iris, Curved, Tungsten Carbide 11.5cm (4-1/2”) 

40-010-26 Iris Tissue, Very Delicate, Straight 11.5cm (4-1/2”) 

40-010-03 Kelly, Straight, Smooth 16cm (6-1/4”) 

40-020-05 #1 Kelly, Curved, Smooth 16cm (6-1/4”) 

40-020-06 #1 Kelly, Curved, Serrated 16cm (6-1/4”) 

40-020-07 Kelly, Angled, Smooth 16cm (6-1/4”) 

40-020-08 Kelly, Angled, Serrated 16cm (6-1/4”) 

40-052-03 Kelly, Curved, Tungsten Carbide 16cm (6-1/4”) 

40-052-04 Kelly, Angled, Tungsten Carbide 16cm (6-1/4”) 

40-000-09 #15 Sullivan, Smooth 14cm (5-1/2”) 

40-000-30 #13 Littauer Stitch 15cm (6”) 

40-000-32 #13S Littauer Stitch 13cm (5”) 

40-000-11 #12 Locklin 16cm (6-1/4”) 

40-000-33 Sickle Stitch 13cm (5”) 

40-010-28 #16 Goldman Fox, Straight, 1 Blade Serrated 14cm (5-1/2”) 

40-020-29 #16 Goldman Fox, Curved, 1 Blade Serrated 14cm (5-1/2”) 

40-020-15 #14 LaGrange, Curved, Serrated 11cm (4-1/4”) 

40-020-63 Lahey Metzenbaum, Dissecting, Curved 14cm (5-1/2”) 

E 

C 

A 

D 

B 

G 

MICROSURGICAL SCISSORS 

41-020-42 Westcott Tenotomy, Curved, Sharp 14cm (5-1/2”) 

41-060-32 Westcott Stitch, Straight, Sharp 12cm (4-3/4”) 

41-060-33 Westcott Stitch , Curved, Sharp 12cm (4-3/4”) 

41-020-03 Micro Swedish Scissors, Curved, Sharp 10cm (4”) 

41-020-86 Micro Iris Scissors, Curved, Delicate,Flat Shank 9cm (3-1/2”) 

G 

F 

H 

I 

MICROSURGICAL NEEDLE HOLDERS 

31-052-06 Castroviejo, Serrated, Straight 14cm (5-1/2”) 

31-052-05 Castroviejo, Serrated, Fine Tip, Tungsten Carbide, Str 14cm (5-1/2”) 

31-051-10 Castroviejo, Serrated, Narrow, Tungsten Carbide, Str 14cm (5-1/2”) 

31-050-10 Castroviejo, Serrated, Broad, Tungsten Carbide, Str 14cm (5-1/2”) 

31-050-16 Castroviejo, Serrated, Broad, Tungsten Carbide, Str 18cm (7”) 

31-050-18 Castroviejo, Serrated, Curved, Broad, TC 18cm (7”) 

I 

H 

J 

K 

L 

NEEDLE HOLDERS 

30-010-12 Crile Wood, Straight 15cm (6”) 

30-020-16 Crile Wood, Curved 15cm (6”) 

30-051-17 Crile Wood, Straight, Tungsten Carbide 15cm (6”) 

30-051-18 Crile Wood, Straight, Tungsten Carbide 18cm (7”) 

30-010-18 Mayo Hegar, Straight 15cm (6”) 



30-051-09 Mayo Hegar, Straight, Tungsten Carbide 16cm (6-1/4”) 

30-051-10 Mayo Hegar, Straight, Tungsten Carbide 18cm (7”) 

32-150-10 Debakey, Tungsten Carbide 18cm (7”) 

30-150-01 Halsey Serrated 13.5cm (5-1/4”) 

30-051-00 Halsey, Serrated, Tungsten Carbide 13cm (5”) 

30-051-03 Webster, Serrated, Tungsten Carbide 12cm (4-3/4”) 

77-13-035 Webster, Serrated, Shiny Finish - Economy 13cm (5”) 

L 

J 

K

30 


A 


B 

C 

A 

B 

DRESSING FORCEPS 

20-021-45 #17 Dressing 16cm (6-1/4”) 

20-021-46 #18 Dressing 16.5cm (6-1/2”) 

D 

C 

RUSSIAN TISSUE FORCEPS 

20-011-08 Russian Tissue Forceps 15cm (6”) 

20-011-09 Russian Tissue Forceps 20cm (8”) 

E 

D 

MAGILL FORCEPS 

44-19-051 Magill Forceps, Child 19cm (7-1/2”) 

44-23-050 Magill Forceps, Adult 25cm (9 3/4”) 

F 

E 

STERILIZING FORCEPS 

20-013-20 Universal Sterilizing Forceps – Straight 20cm (8”) 

F 

YOUNG TONGUE SEIZING FORCEPS 

01-001-51 With Rubber Jaws 16cm (6-1/4”) 

01-001-52 Replacement Tips (Latex Free) 2/set 

G 

H 

G 

BONE GRAFT HOLDING FORCEPS 



H 

CORN SUTURE PLIERS 

20-001-07 Corn Suture Pliers, Angled 15cm (6”) 

I 

MORSELIZER 

06-000-73 Rubin Septal Morselizer, Angular Blades 20cm (8”) 

J 

I 

J 

WOODSON PLASTIC FILLING INSTRUMENT 

62-000-97A ACE Style Woodson #1, Double Ended 16.5cm (6-1/2”)



31 

A 

B 

HALSTED MOSQUITO FORCEPS 

20-022-02 #3, Curved 12cm (4-3/4”) 

20-012-01 #4, Straight 12cm (4-3/4”) 

B 

A 

C 

D 

PROVIDENCE KELLY MOSQUITO FORCEPS 

20-012-20 Providence Kelly Mosquito, Straight 14cm (5-1/2”) 

20-022-21 Providence Kelly Mosquito, Curved 14cm (5-1/2”) 

C 

D 

E 

CRILE MOSQUITO FORCEPS 

20-022-25 Crile Mosquito Forceps, Curved 14cm (5-1/2”) 

F 

G 

H 

I 

TISSUE FORCEPS 

20-151-15 Adson #41, Serrated 12cm (4-3/4”) 

20-001-18 Adson #42, 1x2 Teeth 12cm (4-3/4”) 

20-001-19 Adson, 1x2 Teeth 15cm (6”) 

20-001-27 Adson, 1x2 Teeth, Thumb Grips 12cm (4-3/4”) 

21-000-38 Micro Adson, 1x2 Teeth .8mm 15cm (6”) 

21-150-37 Micro Adson, 1x2 Teeth, Straight 12cm (4-3/4”) 

21-150-35 Micro Adson, Straight, Serrated 12cm (4-3/4”) 

20-000-48 Debakey, 2mm Wide 15cm (6”) 

20-000-49 Debakey, 2mm Wide 19.5cm (7-3/4”) 

20-021-05 Gerald, 1x2 Teeth, Curved 18cm (7”) 

20-001-04 Gerald, 1x2 Teeth, Straight 18cm (7”) 

21-020-22 Iris, Delicate, Half Curve, Serrated 10cm (4”) 

E 

H 

G 

F 

I


32 


A 

B 

PERIOSTEAL ELEVATORS 

C 

D 

A 

B 

C 

D 

Molt 

03-000-73 Double Ended 18cm (7”) 

03-140-42 Double Ended, SB 19cm (7-1/2”) 

03-000-74 Heavy Pattern, Double Ended 19cm (7-1/2”) 

03-000-72 Double Ended, Titanium 19cm (7-1/2”) 

E 

E 

Allen 

03-000-80 #9A 16.5cm (6-1/2”) 

F 

G 

F 

G 

Seldin, #23 

03-000-01 Double Ended 19.5cm (7-3/4”) 

03-000-04 Octagonal Handle, Double Ended 19cm (7-1/2”) 

H 

H 

Freer 

03-110-23 Strong Curve 19cm (7-1/2”) 

03-000-22 #15 Curved Ends 20cm (8”) 

03-000-23 #16 Strong Curved Ends 20cm (8”) 

I 

I 

Pritchard 

03-000-65 Pritchard, Double Ended 19.5cm (7-3/4”) 

J 

K 

L 

M 

N 

J 

K 

L 

M 

CURETTES 

Miller Curettes 

10-002-03 #9 Miller Curette, Double Ended 18.5cm (7-1/4”) 

10-002-04 #10 Miller Curette, Double Ended 18.5cm (7-1/4”) 

10-002-05 #11 Miller Curette, Double Ended 18cm (7”) 

10-002-06 #12 Miller Curette, Double Ended 18cm (7”) 

Molt Curettes 

N 10-002-21 #2/4 Molt Bone Curette, Double Ended 18cm (7”)

ACE VARIJET 

SUCTION/IRRIGATION SYSTEM 

• Single-handed suction with controlled irrigation. 

• Flush and clean site with one convenient instrument. 

• Improved vision to the site by using fewer instruments. 


09-000-90 VariJet Suction Irrigator - 3mm 20cm (8”) 

IRRIGATION TUBING 

SUCTION TUBING 


33 

A 

B 

C 

SUCTION TIPS 

Yankauer 

Includes adapter 

for additional 

connection options 

11-28-004 Yankaur Suction Tip, Complete 28cm (11”) 

09-001-29 Yankaur Suction Tip, Complete, HVAC End 28cm (11”) 

11-02-006 Yankaur Suction Tip, Replacement Tip Only 2.5cm (1”) 

B 

A 

D 

E 

Frazier 

09-000-62 Suction Tip, 8 FR w/stylet, 30° Angle 18cm (7”) 

09-000-64 Suction Tip, 10 FR w/stylet, 30° Angle 18cm (7”) 

09-000-66 Suction Tip, 12 FR w/style, 30° Angle 18cm (7”) 

D 

C 

F 

McKesson Type 

09-000-01 McKesson Suction Tip, 2mm 18cm (7”) 




E 

2mm 

Tip 

3mm 

Tip 

4mm 

Tip 

McKesson Type - Modified 

• Tapered tip designed to fit the irrigation cannulas. 

• Clearing out an extraction site has never been easier. 

• Also perfect for suctioning those hard to reach implants. 

G 09-000-02 McKesson Modified Suction Tip, 3mm 18cm (7”) 

TEAMING UP TO REACH 

THE UNREACHABLE. 

The honed, tapered end of the McKesson 

Type - Modified Suction Tip fits securely 

onto Irrigation Cannulas for finely 

controlled Suction and Irrigation. 

G Tapered tip is 

designed to fit the 

irrigation cannulas. 

H 

G 

F 

H 

I 

MISCELLANEOUS CLEANING BRUSHES 

603-9015 Nylon Bristles 3/pkg 18cm (7”) 

603-9016 Stainless Steel Bristles 3/pkg 18cm (7”) 

I 

J 

J 

J 

K 

K 

L 

L 

AUTOCLAVABLE CLEANING BRUSHES 

09-161-17 Small, 3mm Bristle Diameter, 12/pkg 30.5cm (12”) 

09-161-18 Small, 3mm Bristle Diameter 12/pkg 61cm (24”) 

09-171-18 Medium, 5.3mm Bristle Diameter 12/pkg 30.5cm (12”) 

09-171-19 Medium, 5.3mm Bristle Diameter 12/pkg 61cm (24”) 

09-181-19 Large, 11mm Bristle Diameter 12/pkg 30.5cm (12”) 

09-181-20 Large, 11mm Bristle Diameter 12/pkg 61cm (24”) 

K 

L 

Shown Actual Size

34 



A 

ALL INSTRUMENTS ARE STAINLESS STEEL 

UNLESS OTHERWISE NOTED 

C 

B 

D 

A 

B 

C 

D 

E 

F 

G 

MAXILLARY & MANDIBULAR 

EXTRACTION FORCEPS 

63-003-01 #1 Standard, Upper Anterior 18cm (7”) 

63-004-07 #13 Lower Root 15cm (6”) 

63-003-44 #17 Lower Molar 17cm (6-¾”) 

63-003-45 #23 Lower Molar Forceps 16.5cm (6-½”) 

63-004-13 #33 Lower Root 14cm (5-½”) 

63-003-07 #65 Upper Root 18.5cm (7-¼”) 

63-004-17 #74N Lower Incisor 15cm (6”) 

63-004-53 #89 Upper Cowhorn 18cm (7”) 

63-004-52 #90 Upper Cowhorn 18cm (7”) 

63-004-44 #150 Upper, Smooth 18cm (7”) 

63-164-73 #150S Upper 15cm (6”) 

63-154-42 #150AB Serrated Upper Molar 18cm (7”) 

63-153-09 #150 Serrated Upper Molar 18cm (7”) 

63-004-68 #150AS Pedo Upper Molar, Serrated 14.5cm (5-¾”) 

63-164-72 #151S Lower Molar Forceps 15cm (6”) 

63-003-25 #151A Lower 16.5cm (6-½”) 

63-003-20 #151 Lower Molar Forceps 16.5cm (6-½”) 

63-004-27 #MD3 Mead Lower Ant. Forceps 14cm (5-½”) 

20-011-70 Steiglitz Root Forceps, Straight 14cm (5-½”) 

20-021-71 Steiglitz Root Forceps, 45 degree Angle 13.5cm (5-¼”) 

20-021-72 Steiglitz Root Forceps, 90 degree Angle 13cm (5”) 

E 

F 

G



35 

A 

ARCH BARS 

08-001-10 Erich – Meter Roll 1m (approx. 36”) 

A 

B 

SPOOL WIRE ON AUTOCLAVABLE DELRIN SPOOLS 

Stainless Steel 

08-000-87 Spool Wire, 28G, .012”, 4 oz. Spool 61m (200 feet) 






C 

TUBE WIRE 

08-001-82 28G, Strands 50/tube 45.75cm (18”) 




B 

D 

WIRE CUTTING SCISSORS 

08-002-11 Wire Cutting Scissors 12cm (4-3/4”) 

08-052-12 Wire Cutting Scissors, Tungsten Carbide 12cm (4-3/4”) 

08-002-13 Smith, 1 blade Serrated 15cm (6”) 

08-052-60 Smith, 1 blade Serrated, Tungsten Carbide 18cm (7”) 

C 

E 

WIRE TWISTERS 

08-082-36 Wire Twisters, Blunt 15cm (6”) 

08-052-37 Wire Twisters, Blunt, Tungsten Carbide 15cm (6”) 

D 

E

36 



A 

PLASTIC RETRACTORS 

• Can be steam sterilized to 270°F (130°C) 

• Dry heat not recommended 

B 

A 

ACE Lip/Cheek Retractors 

• Autoclavable 

• Plastic 

01-000-30 Universal, Double Ended 40mm (4”) 2/pkg 

01-000-38 Adult, Single Ended 45mm (4-1/4”) 2/pkg 

C 

B 

C 

Self-Spanning Lip/Cheek Retractors 


• Plastic 

01-160-32 Child, 35mm each 

01-170-31 Adult, 50mm each 

01-160-25 With Holders, Child, 35mm each 

01-170-25 With Holders, Adult, 50mm each 

F E D 

Adult Child Small 

D 

E 

F 

ACE MCKESSON TYPE MOUTH PROPS 

• Autoclavable • Not shown actual size • Silicone — Latex Free 

01-160-35 Small Child, Black pair 

01-160-39 Small Child, Blue pair 

01-160-36 Small Child, Tan pair 

01-160-37 Child, Black pair 

01-160-40 Child, Blue pair 

01-160-38 Child, Tan pair 

01-170-41 Adult, Black pair 

01-170-43 Adult, Blue pair 

01-170-42 Adult, Tan pair



37 

2” (5cm) wide 

STAINLESS STEEL 

LIP/CHEEK/TONGUE RETRACTORS 

A 

2-7/8” (7.5cm) wide 

B 

C 

A 

B 

C 

D 

E 

F 

G 

H 

01-003-91 Columbia, Double Ended 13cm (5”) 

61-003-90 Branemark® Type 16cm (6-1/4”) 

01-003-94 Feldman Retractor, Double Ended 14cm (5-1/2”) 

01-160-95 Wieder Retractor, Child 13cm (5”) 

01-170-94 Wieder Retractor, Adult 13cm (5”) 

01-000-88 University of Minnesota, 14cm (5-1/2”) 

Tongue/Cheek Retractor, Double Ended 

01-001-60 University of Minnesota, Austin Retractor 7.5cm (3”) 

01-004-04 Simplex, Lip/Cheek Retractor 11.5cm (4-1/2”) 

01-002-06 Farabeuf Retractors, Double Ended, 2 /set 11.5cm (4-1/2”) 

1-3/8” (3.5cm) 

D 

E 

G 

F 

H 

I 

MOUTH GAGS 


01-170-16 Molt Mouth Gag, Adult 14cm (5-1/2”) 

01-160-18 Molt Mouth Gag, Child 11.5cm (4-1/2”) 

01-170-23 Molt Mouth Gag Replacement Covers set/2 

I 

J 

J 

01-000-25 Denhardt Mouth Gag 13cm (5”) 

TMJ DYSFUNCTION TREATMENT 

In Port 

Levaging TM Joint – Shepherd Arthrocentesis Instrument 

A small incision (1/8”) is made into the skin; mosquito forceps are used to 

make a blunt dissection to the lateral ligament; the arthrocentesis instrument 

may then enter the capsule into the superior chamber. 

Reference: Trieger, N, Hoffman, C, Rodriguez, E. The Effect of Arthrocentesis of 

the Temporomandibular Joint in Patients With Rheumatoid Arthritis. Journal of 

Oral and Maxillofacial Surgery May 1999; 57:537-541. 

Out Port 

Trocar for 

Superior 

Chamber 

07-020-42 Shepherd Arthrocentesis Instrument 18G x 2.5”

38 

Sutures 


REVERSE CUTTING NEEDLES 

3/8 Circle 

FS3 

FS2 

C2 

P1 

1/2 Circle 

M1 

C19 

ROUND DIAMOND NEEDLES 

1/2 Circle 

TF 

RB1 

REVERSE CUTTING NEEDLES 

3/8 Circle 

DS18(FS2) 

DS24(FS1) 

DSM13(P3) 

DSM18(PS2) 

DS12(C2) 

Comparable Comparable 

ACE SUTURES 

to ETHICON to LOOK 

Item # Size Description Needle In. Qty. Suture Needle Suture Needle 

003-2487 3-0 Black Braided Silk DS18 18” 12 2772 FS2 784B C6 

003-2488 3-0 Black Braided Silk HS24 18” 12 632G X1 785B C31 

003-2486 3-0 Black Braided Silk HS16 18” 12 7762 X8 - - 

003-2491 3-0 Black Braided Silk DS24 18” 12 684G FS1 786B C7 

003-2489 4-0 Black Braided Silk DS18 18” 12 683G FS2 - - 

003-2492 4-0 Black Braided Silk DSM13 18” 12 641G P3 - - 

003-2479 5-0 Black Braided Silk DSM13 18” 12 - - - - 

003-2500 5-0 Green Braided Poly. HRT17 18” 12 7773 V5 797B Y5 

003-2460 5-0 Black Mono Nylon DS12 10” 12 - C2 913B C17 

003-2461 6-0 Black Mono Nylon DS12 10” 12 - C2 911B C17 

003-2501 5-0 Polyprop.Blue Mono. DSM13 18” 12 8698G P3 - C3 

ACE PGA SUTURES EQUIVALENT TO VICRYL ® ** 

Item # Size Description Needle In. Qty. 

003-3930 3-0 Violet Braided PGA Coated DS18 18” 12/box 

003-3920 4-0 Violet Braided PGA Coated DS18 18” 12/box 

003-4640 4-0 Violet Braided PGA Coated DSM13 18” 12/box 

003-4630 5-0 Violet Braided PGA Coated DSM13 18” 12/box 

003-4220 4-0 Undyed Braided PGA Coated DS18 27” 12/box 

003-4960 4-0 Undyed Braided PGA Coated DSM18 18” 12/box 




ACE PGA-RAPID ABSORBING* SUTURES EQUIVALENT TO VICRYL RAPIDE ® ** 

Item # Size Description Needle In. Qty. 

003-9907 3-0 Undyed Braided PGA-RA DSM18 18” 12/box 


003-9900 4-0 Undyed Braided PGA-RA HRT17 27” 12/box 


*Maintains 50% tensile strength at 5 days; 0% at 14 days. 

**Vicryl ® and Vicryl Rapide ® are Registered Trademarks of Ethicon, Inc. 

1/2 Circle 

HS24(X1) 

HS16(X8) 

ACE PTFE SUTURES 

Item # Size Description Comparable Needle In. Qty. 

TAPER POINT NEEDLES 

1/2 Circle 

HRT17(V5) 

T4(SH1) 

T28(RB1) 

430-12-4020 2-0 PTFE Suture - 3/8 circle, 19mm - Reverse Cutting FS-2 18” 12/box 



430-12-4032 3-0 PTFE Suture - 1/2 circle, 13mm - Reverse Cutting M1 18” 12/box 

430-12-4040 4-0 PTFE Suture - 3/8 circle, 16mm - Reverse Cutting FS3 18” 12/box 

430-12-4041 4-0 PTFE Suture - 3/8 circle, 13mm - Reverse Cutting C2 18” 12/box 

430-12-4042 4-0 PTFE Suture - 1/2 circle, 13mm - Round Diamond Point TF 18” 12/box 

430-12-4043 4-0 PTFE Suture - 3/8 circle, 19mm - Reverse Cutting FS2 18” 12/box 



430-12-4052 5-0 PTFE Suture - 1/2 circle, 13mm - Round Diamond Point RB1 18” 12/box 

430-12-4061 6-0 PTFE Suture - 1/2 circle, 10mm - Round Diamond Point TF 18” 12/box 

430-12-4062 6-0 PTFE Suture - 3/8 circle, 10mm - Reverse Cutting C2 18” 12/box

Knurled 


Surgical Burs 

39 

ACE TREPHINE BURS - CONTRA-ANGLE 

• For harvesting bone in autogenous bone graft placement. 

• May be used for retrieval of implants. 

• Laser marked score lines. 

• Manufactured from Titanium Alloy (Ti-6Al-4V ELI). 

• Internally irrigated to minimize the risk of overheating the bone during drilling. 

• Can be used with the Drill Guide Paralleling System to eliminate drill chatter during graft or implant harvesting. 

I.D. 

mm 

O.D. 

mm 

Length 

mm 

Cutting 

length 

Markings 

04948001 A 2 2.8 35 18.5 mm 8,10,13,15,18 mm 

04948002 B 2.75 3.5 35 18.5 mm 8,10,13,15,18 mm 

04948201 C 3.75 4.6 35 18.5 mm 8,10,13,15,18 mm 

04948202 D 4.25 5.10 35 18.5 mm 8,10,13,15,18 mm 

04948401 E 5.25 6.10 32 15.5 mm 8,10,13,15 mm 

04948501 F 6 6.9 32 15.7 mm 8,10,13,15 mm 

04948502 G 7 7.9 32 15.8 mm 8,10,13,15 mm 

04948701 H 8 8.9 32 14 mm 8,10,13 mm 

04948702 I 10 10.8 32 14 mm 8,10,13 mm 

ACE TREPHINE BURS – HANDPIECE 

• For harvesting bone in autogenous bone graft placement. 

• Laser marked score lines. 

• Burs may be notched for the Stryker 100K Impaction Drill – Flat or Stepped – or J-Notched for an additional charge. 

• Stryker notched burs may be used in straight Hall type handpieces. 

• Manufactured from Titanium Alloy (Ti-6Al-4V ELI). 

A 

B 

C 

D 

E 

F 

G 

H 

I 

I.D. 

mm 

O.D. 

mm 

Length 

mm 

Cutting 

length 

Markings 

04949201 J 3.75 4.6 52 18.5 mm 8,10,13,15,18 mm 

04949202 K 4.25 5.1 52 18.5 mm 8,10,13,15,18 mm 

04949501 L 6 6.9 49 15.7 mm 8,10,13,15 mm 

J 

K 

L 

SUGGESTED TREPHINES TO USE FOR RETRIEVE FAILED IMPLANTS For Implants up to..... 

3.3 mm use 04948201 3.5–4.0 mm......... use 04948202 4.5–5.0 mm......... use 04948401 5.0–6.0 mm......... use 04948501 

ACE TREPHINE BURS SURGICAL KIT 

• Includes the 9 Contra Angle Trephines A through I listed above 

• Includes the 3 Handpiece Trephines J through L listed above 

• Includes an ACE 2" Square Titanium Bowl and Delrin Case 

0494512 ACE Trephine Burs Surgical Kit 

M 

N 

ACE DR. SMILER’S TREPHINE BURS – POSTERIOR 

• For harvesting autogenous bone in the posterior maxillary region 

• Cutting length is 6.75 mm, total length is 23 mm 

• Laser marked score line at 6 mm depth 

• Manufactured from Titanium Alloy (Ti-6Al-4V ELI) 

04948601 Smiler’s Trephine bur, 6 mm I.D. 6.9mm O.D. 

04948602 Smiler’s Trephine bur, 7 mm I.D. 7.9mm O.D. 

M 

N 

O 

ACE LATCH TO SQUARE DRIVER CONVERTER 

• Secures and locks contra shaft for hand or ratchet drive 

20155411 Latch to square driver converter, 14mm long 

O

ME / NA 

BONE REGENERATIVE 

PRODUCTS CATALOG 

Copyright © February 2023 ACE Surgical Supply Co., Inc. 

Reproduction in whole or part is specifically prohibited without written permission. 

We are not responsible for typographical errors.

2023 ACE Catalogue MENA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?