Tillage Catalogue 2024

TILLAGE 

2024 

New Product 

The ADAPT-T 

Productivity | Efficiency

Welcome the 

ADAPT-T to Tillage 2024 

Compatible with liquid 

systems, granular fertiliser 

and wetting agent 

Switch from single 

to double shoot or 

inline to paired row 

Adjustable continuous 

point with minimum 

point wastage 

How to Order: 

1 

Choose your seeder bar 

2 

Choose your Starter (BLUE) Dual Shoot, 

Single Shoot or Paired Row. 

ADAPT-T Starter (BLUE) comes PRE-ASSEMBLED. 

Attach to your machine with two bolts. 

3 

Choose your options 

Our team is here to help, so please call your local Primary Sales technical support for advice on the 

right product for your conditions and your machine. 

Call 08-9250-3500 or email us at sales@primarysales.com.au 

2 TILLAGE 2024 

For help & more information, call your Primary Sales office

Adapt-T Seeding System 

SINGLE SHOOT 

DUAL SHOOT 

or 

ADAPT-T SINGLE SHOOT STARTER MORRIS INC HOLDER, 2 X POINTS & FASTENERS 

ADT3-MO-SSKA *liquid tube not included, must order separately 

$443.00 

ADAPT-T CURVED SEED TUBE MORRIS/HORSCH 

ADT3-STMC-40 $79.50 

Options 

ADAPT-T CURVED SEED TUBE MORRIS 40MM WITH LIQ 

ADT3-STMC-40L $89.00 

ADAPT-T FERTILIZER TUBE INC MOUNT CLAMP 

ADT3-FTH-K $21.50 

ADAPT-T PAIRED ROW BOOT TIPPED INC BOLT & NYLOC 

ADT3-PR01-TK $117.00 

ADAPT-T FERT BOOT TIPPED INC BOLT & NYLOC (FOR INLINE ROCKY CONDITIONS) 

ADT3-FB01-TK $52.00 

ADAPT-T LIQUID TUBE SUIT MORRIS/HORSCH 

ADT3-LM $37.50 

ADAPT-T DUAL SHOOT STARTER MORRIS INC HOLDER, 2 X POINTS, FERTILISER TUBE, LIQUID & FASTENER 

ADT3-MO-DSLKA 

$465.50 

ADAPT-T DUAL SHOOT STARTER MORRIS INC HOLDER, 2 X POINTS & FASTENERS, AND FERTLIZER TUBE 

ADT3-MO-DSKA *Liquid tube not included 

$441.00 

ADAPT-T FERT BOOT TIPPED INC BOLT & NYLOC 

ADT3-FB01-TK $52.00 


ADT3-STMC-40 $79.50 

Options 

ADAPT-T CURVED SEED TUBE MORRIS 40MM WITH LIQ 

ADT3-STMC-40L $89.00 


ADT3-LM $37.50 


ADT3-PR01-TK $117.00 

ADAPT-T PAIRED ROW FERT/SEED. TUBE REAR (SUIT HORSCH/MORRIS) 

ADT3-PR-FTRH $69.50 

Parts 

55MM SEED 

TUBE NOW 

AVAILABLE 


ADT3-FTH-K $21.50 

Precision Non-Wetting Soil Sticky Soil 

Seeding 

ADAPT-T SEED BOOT MOUNT PLATE (PAIR INC FASTENERS) SUIT MORRIS/HORSCH 

ADT3-SBM01-K $61.50 

ADAPT-T HOLDER, SUIT MORRIS 

ADT3-HM $159.50 

ADAPT-T CONTINUOUS POINT 16MM INC FASTENERS 

ADT3-P03-16K $115.00 

Prices are ex works & exclude GST. 

All Prices are list & are subject to change without notice. Parts may vary slightly from illustrations. PRIMARYSALES.COM.AU 3


Seeding 


SINGLE SHOOT 

DUAL SHOOT 

or 

ADAPT-T SINGLE SHOOT STARTER HORSCH INC HOLDER, 2 X POINTS & FASTENERS 

ADT3-H18-SSKA * Liquid tube not included, must be ordered separately $452.50 

ADAPT-T CURVED SEED TUBE HORSCH/MORRIS 

ADT3-STMC-40 $79.50 

Options 


ADT3-FTH-K $21.50 


ADT3-PR01-TK $117.00 


ADT3-FB01-TK $52.00 

ADAPT-T DUAL SHOOT STARTER HORSCH INC HOLDER, 2 X POINTS, FERTILISER TUBE, LIQUID & FASTENERS 

ADT3-H18-DSLKA 

$490.00 

ADAPT-T DUAL SHOOT STARTER HORSCH INC HOLDER, 2 X POINTS & FASTENERS & FERTILISER TUBE 

ADT3-H18-DSKA * Liquid tube not included, must be ordered separately 

$467.00 


ADT3-STMC-40 $79.50 


ADT3-FB01-TK $52.00 

Options 


ADT3-LM $37.50 


ADT3-PR01-TK $117.00 

ADAPT-T PAIRED ROW FERT/SEED TUBE REAR (SUIT HORSCH/MORRIS) 

ADT3-PR-FTRH $69.50 

Parts 

ADAPT-T SEED BOOT MOUNT PLATE (PAIR INC FASTENERS) SUIT MORRIS/HORSCH 

ADT3-SBM01-K $61.50 

ADAPT-T HOLDER, SUIT HORSCH 

ADT3-H18V2 $220.00 


ADT3-P03-16K $115.00 


ADT3-FTH-K $21.50 


ADT3-STMC-40 $79.50 




SINGLE SHOOT 

ADAPT-T SINGLE SHOOT STARTER BOURGAULT INC HOLDER, 2 X POINTS, DEFLECTOR & FASTENERS 

ADT3-BG-SSKA * Liquid tube not included, must be ordered separately 

$417.00 

ADAPT-T CURVED SEED TUBE BOURGAULT 

ADT3-STBC-40 $79.50 

Options 


ADT3-STBC-40 $79.50 

ADAPT-T CURVED SEED TUBE BOURGAULT 40MM WITH LIQ 

ADT3-STBC-40L $89.00 


ADT3-FTH-K $21.50 


ADT3-PR01-TK $117.00 


ADT3-FB01-TK $52.00 

Precision Non-Wetting Soil 

Sticky Soil Wetting 

DUAL SHOOT 

or 

ADAPT-T DUAL SHOOT STARTER BOURGAULT INC HOLDER, 2 X POINTS, LIQUID & FASTENERS & FERTILISER TUBE 

ADT3-BG-DSLKA $454.50 

ADAPT-T DUAL SHOOT STARTER BOURGAULT INC HOLDER, 2 X POINTS & FASTENERS AND FERTILISER TUBE 

ADT3-BG-DSKA *liquid tube not included, must order separately 

$430.00 


ADT3-FB01-TK $52.00 


ADT3-STBC-40 $79.50 

Options 

ADAPT-T CURVED SEED TUBE BOURGAULT 40MM WITH LIQ 

ADT3-STBC-40L $89.00 

ADAPT-T LIQUID TUBE SUIT BOURGAULT 

ADT3-LB2 $37.50 


ADT3-PR01-TK $117.00 

ADAPT-T PAIRED ROW FERT/SEED TUBE REAR SUIT BOURGAULT 

ADT3-PR-FTRB $70.00 

Parts 

ADAPT-T HOLDER MOUNT BOURGAULT (INC FASTENERS) 

ADT3-HBM-K $92.50 

ADAPT-T HOLDER BOURGAULT 

ADT3-HB $136.00 


ADT3-P03-16K $115.00 

DEFLECTOR BOURGAULT 

ADT3-DB $9.50 


ADT3-FTH-K $21.50 




Seeding 

Contour 2 / Quantum Dual 

TINE LEG WITH IN-LINE DUAL SHOOT > FOR ACCRETIVE SOIL CONDITIONS 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N (B-N12-UNC-NYL, B-200-12-UNC-G8). 

MO-C2-TL 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N (B-N12-UNC-NYL, B-200-12-UNC-G8) 

MO-C2-TL 

$176.50 

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE POINT INCL. B&N (B-M10-035-G10, B-NM10-NYL) 

MO-C2-PF $111.50 

DEEP BANDING, ADJ. FERTILISER TUBE INC 4X B&N, FOR OPTIMUM SEPARATION 

PHX-DS-FT2 $118.50 

10MM LIQUID TUBE 

MO-C2-LIQ $39.00 

ADJ SEED TUBE WITH 40MM CLOSER 

MO-C2-STC-40 $83.50 

Options 

HEAVY DUTY 16MM WEAR ENHANCED, HEIGHT-ADJ. REPLACEABLE POINT INCL. B&N 

MO-C2-PF-16 $143.50 


Run 

MO-C2-STC-25 Out $85.00 

ADJ SEED TUBE WITH (CURVE) 40MM CLOSER 

MO-C2-STC-40C2 $87.00 

REVERSIBLE RESIDUE DEFLECTOR 

MO-C2-RD $44.50 

TINE LEG WITH IN-LINE DUAL SHOOT > FOR SANDED/LOAMY SOIL CONDITIONS 

$176.50 


MO-C2-PF $111.50 

DEEP BANDING, ADJ. FERTILISER TUBE INC 4X B&N FOR OPTIMUM SEPARATION 

PHX-DS-FT2 $118.50 


MO-C2-LIQ $39.00 


MO-C2-STC-40C2 $87.00 

Options 


MO-C2-PF-16 $143.50 

ADJ FERTILISER TUBE (INC 4 X B&N) 

PHX-DS-FTN $72.50 


ADJ SEED TUBE 600MM Y-TAIL 

MO-C2-STC-25 

$85.00 MO-C2-ST-YTAIL 

$130.00 


MO-C2-STC-40 

ADJ SEED TUBE (CURVE) WITH 55MM 

$83.50 MO-C2-STC-55C2 

$115.00 



Contour 2 / Quantum Single 

TINE LEG WITH IN-LINE SINGLE SHOOT 


MO-C2-TL 


MO-C2-TL 

$176.50 


MO-C2-PF-16 $143.50 

SINGLE SHOOT BRACKET (INC 4 X B&N) 

MO-C2-SBB $48.00 

10mm Liquid Tube 

MO-C2-LIQ $39.00 


MO-C2-ST-YTAIL $130.00 

Options 


Run 

MO-C2-STC-25 Out $85.00 


MO-C2-STC-40 $83.50 


MO-C2-STC-40C2 $87.00 


MO-C2-RD $44.50 

TINE LEG WITH IN-LINE SINGLE SHOOT 

$176.50 


MO-C2-PF $111.50 


MO-C2-SBB $48.00 


MO-C2-LIQ $39.00 


MO-C2-STC-55C2 $115.00 

Options 


MO-C2-STC-25 $85.00 


Seeding 


MO-C2-STC-40 $83.50 


MO-C2-STC-40C2 $87.00 


MO-C2-RD $44.50 




Seeding 

Contour 2 / Quantum 

TINE LEG WITH MORRIS PAIRED ROW & PSA WING DUAL SHOOT > FOR ACCRETIVE 

SOIL CONDITIONS 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N. (B-N12-UNC-NYL, B-200-12-UNC-G8 

MO-C2-TL $176.50 


MO-C2-PF $111.50 


MO-C2-LIQ $39.00 

WEAR ENHANCED WING TO SUIT OEM MORRIS PAIRED ROW 

MO-C2-WING $120.00 

Options 


MO-C2-PF-16 $143.50 


MO-C2-RD $44.50 

MORRIS QUANTUM HOSE HOLDER 

MORRIS QUANTUM HOSE HOLDER - GALVANISED (INC FASTENERS) 

MO-Q-HH $93.00 

LIQUID AND WETTER SOLUTIONS QUANTUMS ONLY 

MORRIS C2 SEED TUBE 40MM TAIL WITH LIQ (SUITS QUANTUM ONLY) 

MO-C2-STC-40L 

MORRIS C2 Y TAIL SEED TUBE WITH DUAL LIQUID 

MO-C2-ST-YTAIL-L 

LIQUID AND WETTER SOLUTIONS WITH C2 CLEARANCE 

NEW 

$117.50 

MORRIS C2 SEED TUBE 55MM TAIL WITH LIQ (SUITS QUANTUM ONLY) 

MO-C2-STC-55L $123.50 

$160.00 

MORRIS C2 CURVED SEED TUBE - 40MM WITH LIQUID WITH C2 CLEARANCE 

MO-C2-STC-40L2 $120.00 

MORRIS C2 CURVED SEED TUBE - 55MM WITH LIQUID WITH C2 CLEARANCE 

MO-C2-STC-55C2L2 $125.00 



Contour Drill 1 

TINE LEG WITH IN-LINE DUAL SHOOT > FOR ACCRETIVE SOIL CONDITIONS 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N 

MO-CD-CTL $166.50 

WEAR ENHANCED, HEIGHT-ADJ REPLACEABLE POINT INCL. B&N 

MO-C2-PF $111.50 

DEEP BANDING, ADJ. FERTILISER TUBE (INC 4X B&N) FOR OPTIMUM SEPARATION 

PHX-DS-FT2 $118.50 


MO-CD-CTL-LT $29.50 


MO-C2-STC-40 $83.50 

Options 


MO-C2-PF16 


MO-C2-RD 

$143.50 


MO-C2-STC-25 $85.00 

TINE LEG WITH IN-LINE DUAL SHOOT > FOR SANDED/LOAMY SOIL CONDITIONS 

Options 


MO-C2-PF-16 

$44.50 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL 2 X B&N 

MO-CD-CTL $166.50 


MO-C2-PF $111.50 

DEEP BANDING, ADJ. FERTILISER TUBE (INC 4X B&N) FOR OPTIMUM SEPARATION 

PHX-DS-FT2 $72.50 

10mm LIQUID TUBE 



Run 

MO-C2-STC-25 Out 

$85.00 

$143.50 




Seeding 


MO-C2-STC-40 

$83.50 

ADJ SEED TUBE (CURVE) WITH 55MM CLOSER 



MO-C2-RD 

$44.50 




Seeding 

Contour Drill 1 

TINE LEG WITH MORRIS PAIRED ROW & PSA WING DUAL SHOOT > FOR ALL SOIL 

CONDITIONS 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL. 2 X B&N. (B-N12-UNC-NYL, B-200-12-UNC-G8 

MO-CD-CTL $166.50 


MO-C2-PF $111.50 



WEAR ENHANCED WING TO SUIT OEM MORRIS PAIRED ROW 

MO-C2-WING $120.00 

Options 


MO-C2-PF16 $143.50 


MO-C2-RD $44.50 

TINE LEG WITH IN-LINE SINGLE SHOOT OPTIONS 

TINE LEG (TO SUIT REPLACEABLE POINT) INCL 2 X B&N 

MO-CD-CTL 


MO-C2-PF 


MO-C2-STC-40 

$166.50 


MO-C2-PF-16 $143.50 


MO-C2-SBB $48.00 

10mm LIQUID TUBE 


SEED TUBE 60MM Y-TAIL 


Options 

$111.50 


MO-C2-STC-25 $85.00 

$83.50 


MO-C2-RD $44.50 



Bourgault Paralink 

TINE LEG WITH IN-LINE DUAL & SINGLE SHOOT > FOR SANDED/LOAMY SOIL 

Standard 

TINE ADAPTOR, INC: POINT HOLDER FERTILISER TUBE, SHANK MOUNT PLATE (INC 4 X B&N) 

BG-3310-TA2 $136.50 


BG-3310-P $109.50 

CURVED STEEL SEED TUBE 

BG-3310-STC-3 $77.50 

Options 

HEAVY DUTY 16MM WEAR ENHANCED, HEIGHT ADJ. REPLACEABLE POINT INCL. B&N 

BG-3310-P16 $137.00 

WEAR ENHANCED, HEIGHT-ADJ. REPLACEABLE POINT WITH LIQUID TUBE INCL. B&N 

BG-3310-P-LIQ $131.00 

HEAVY DUTY 16MM WEAR ENHANCED, HEIGHT-ADJ. REPLACEABLE POINT WITH LIQUID TUBE. INCL B&N 

BG-3310-P16-LIQ $165.00 

Precision Non-Wetting Soil 

Sticky Soil Wetting 

STRAIGHT ADJ STEEL SEED TUBE 

BG-3310-ST-2 $100.00 


Run 

BG-3310-YTAIL Out 

$117.00 

STEEL REDUCER TUBE REQUIRED WHEN USING 25MM I.D. HOSE 

ST-RED-32-25 $11.00 




Seeding 

Horsch Sprinter (2018 & Onwards) 

TINE LEG WITH IN-LINE DUAL SHOOT > ALL ROUNDER PHOENIX 

Phoenix 


PHX-H18-TL $188.50 


MO-C2-PF $111.50 

DEEP BANDING, ADJ. FERTILISER TUBE (INC 4 X B&N) FOR OPTIMUM SEPARATION 

PHX-DS-FT2 $118.50 


PHX-STC-40C-2 $95.00 

Options 


MO-C2-PF16 $143.50 




PHX-STC-40-2 $90.50 


MO-C2-RD $44.50 

TINE LEG WITH IN-LINE DUAL & SINGLE SHOOT > FOR SANDED/LOAMY SOIL 

Standard 


HOR-S18-TL $128.50 

TINE ADAPTOR, IN: POINT HOLDER FERTILISER TUBE, SHANK MOUNT PLATE (INC 4 X B&N) 

BG-3310-TA2 $136.50 


BG-3310-P $109.50 

CURVED STEEL SEED TUBE 

BG-3310-STC-3 $77.50 

Options 


BG-3310-P16 $137.00 

WEAR ENHANCED, HEIGHT-ADJ. REPLACEABLE POINT WITH LIQUID TUBE INCL. B&N 

BG-3310-P-LIQ $131.00 

HEAVY DUTY 16MM WEAR ENHANCED, HEIGHT-ADJ. REPLACEABLE POINT WITH LIQUID TUBE. INCL B&N 

BG-3310-P16-LIQ $165.00 

STRAIGHT ADJ STEEL SEED TUBE 

BG-3310-ST-2 $100.00 


BG-3310-YTAIL-2 $117.00 



Primary Coulter Assemblies 

Excels in heavy Stubbles & vine-type weeds 

The right-hand side of this paddock clearly illustrates the benefits of using our coulter discs 

when sowing into heavy stubbles. 

• Heavy-duty castoring coulter assemblies designed for a wide range of 100mmframe 

cultivators, chisel plows and toolbars, featuring: adjustable depth (5 

increments) & pressure settings 

• Can be pinned-up when not required or easily removed 

• Fitted with 500mm Ø x 60 ripple disc 

• Long service life & low-maintenance design 

• Includes all mounting gear 

• Suitable for bars with adequate lifting capacity only 

CLT-TBM-HYD-A 

CLT-TBM-HYD-N 

Twin Hydraulic Coulter HD Adjustable 

Twin Hydraulic Coulter Fixed 260mm 

POA 

POA 

TWIN ADJUSTABLE WIDTH, 

HYDRAULIC DEPTH CONTROL 

CLT-TBM-HYD-A 

SINGLE DISC ASSEMBLY 

SINGLE Bar Mount 

CLT-SBM-60 


Weeding 

CLT-TBM-HYD-W 

Twin Hydraulic Coulter Fixed 300mm 

POA 

CLT-SBM-HYD 

Single Hydraulic Coulter 

POA 

CLT-SBM-60 

CLT-TBM-60-HDA 

CLT-TBM-60-HD260 

CLT-TBM-60-HD300 

Single Bar Mounted Coulter 330mm 

Heavy Duty Twin Adjustable Coulter 

260mm Heavy Duty Twin Fix 260mm Coulter 

Heavy Duty Twin Fix 300mm Coulter 

$1,957.00 

$2,940.00 

$2,211.50 

$2,357.00 

TWIN DISC ASSEMBLY 

Twin Adjustable 

CLT-TBM-60 

Stubble 

CLT-TBM-60 

Twin Bar Mounted Coulter 226mm-300mm 

$2,202.50 

ORDER 

SOON FOR 

DELIVERY 

2024 

*Adaptable to 160-330mm 

HEAVY DUTY TWIN DISC 

ASSEMBLY Twin H/D Adjustable 

CLT-TBM-60-HDA 

Heavy duty adjustable version, showing 

tapered roller bearing assemblies. 

Row Spacing: 160mm to 23mm or 

226mm to 330mm @ approx. 10mm 

increments. Fixed spacing options to 

400mm. 



Precision Yield Seeding 

Non-Wetting Soil Weeding Deep Ripping 

MADE RUGGED FOR DURABILITY & PRODUCTIVITY 

Productivity 

With increasing need for dry seeding the priority for many 

Australian farmers is getting 

the seed into the ground for effective soil-to-seed contact and 

to take advantage of any available moisture at depth whilst 

completing their seeding program in time to benefit from rain 

when it arrives. 

Designed for Durability 

Deep solid frame structure provides the rigid strength required to 

cope with tough Australian farming conditions. 

Control 

To achieve flourishing crop emergence and yield potential having 

better control over consistency in seed depth, fertiliser separation 

and the soil-to-seed contact to suit your specific paddock 

conditions is essential. 

Trash Flow 

Superior through frame trash flow through deep rank frame 

design (6 centre and 5 on wing frames) 

Depth & Placement 

Precision Seeder Bar 

Control over seed and fertiliser separation and placement to your 

conditions, easy seed boot adjustment in 7.5mm increments and 

control to 

dig deep or shallow; easy control of working depth of the tine 

from 5mm to 300mm. 

Seeding into High Stubble 

Depth of frame allows high flow of trash through the bar. Combined 

with contour following tine module able to deliver 1000lbs 

breakout at the point, this gives you control to maintain effective 

delivery of seed in compact to rocky soil conditions. 

Floatation tyres for better weight distribution & control 

Leading Ground 

Engaging Options 

See page 15 



• Hydraulically adjustable tine trip delivers up to 1000LB force at the point 

• Poppet valve in tine cylinder to dampen return 

• Assembly can be pinned up for double row spacing 

ROLLER BOX U-PLATE BOLT ON 

REPLACEMENT 

P-T-RBUP-B2 

$40.00 

ROLLER ASSEMBLY COMPLETE 

FOR ROLLER BOX ASSEMBLY 

P-T-FTRAC-3275 

$94.00 

SHORT RE-OPENER TO SUIT 

BOLT-ON WEAR PLATE HEAT 

TREATED SPRING Steel tine, 

16mm wide. Tine depth adjustable 

in increments of 7.5mm 

P-ST-3087-SH 

$32.50 

PPS HUB CAP SUIT 4 STUD 

HUB PRESS WHEEL & 

COULTER 

P-PW-HC-2966-8 

$49.50 

PRESS WHEEL TYRE, 140MM 

WIDE “V” 

P-PW-TYWV-2965 

$175.00 

Wide presswheel to maximise 

flotation and water harvesting 

$34.50 

• Rugged tapered roller bearings, 

double seal design with 

mud shield and dust cap 

• Spring-loaded hinging joint 

to avoid damage on breakout 

PRESS WHEEL RIM HALF, GAL- 

VANISED STEEL 

P-PW-RH-2873 

Precision Tine Assembly 

FERTILISER TUBE, GALVANISED 

(Hose holder Included) 

P-FT-3107-2 

$221.00 

SEED TUBE FOR 3087 RE- 

OPENER P-ST-3087-04N 

$32.50 

WEAR PLATES FOR 3087 RE- 

OPENER Tungsten Tipped C/W 

Bolts 25mm P-ST-3087-WP25 

$30.50 

25MM HD WITH EXTRA 

TUNGSTEN P-ST-3087-WP25E 

$64.50 

40MM WIDE 

P-ST-3087-WP40 

$48.00 

PRECISION 

FERTILISER INJEC- 

TOR TUBE WITH TC 

WEAR PROTECTION 

(Unsuitable for 

harsh conditions) 

P-FT-3003-SQ 

$109.00 

COMPLETE TINE RAM 

ASSEMBLY P-R-TINE-P-ASS 

$632.00 

OPTIONAL LOWER TINE QUICK 

ADJUSTER 

Get the best wear from your 

points with this clever innovation! 

P-T-LTQA INC PIN/CLIP 

$176.50 

LIQUID FERTILISER TUBE 

10MM 

STAINLESS STEEL (Other sizes 

available to order) 

FOR PPS KNIFE POINT 

P-FT-3325-LHDK 

$75.00 

FOR PPS WINGED POINT 

P-FT-3327-LIQW 

$56.50 

CAST POINTS, HEAT TREATED 

WITH TUNGSTEN CARBIDE TIPS 

(Fixed to tine lower leg with 

flush-fitting roll pins) 

KNIFE POINT, 200 MM T/C 

P-P-K-200-3325 

$140.50 

KNIFE POINT,150 MM T/C 

P-P-K-150-3325 

$128.00 

WINGED POINT, 190 MM T/C 

P-P-W-190-3327 

$212.00 

WINGED POINT,150 MM T/C 

P-P-W-150-3327 

$212.00 

Precision Yield 

MOUNT BAR FOR Y-TAIL 

BOOT 

(2 X BRACKET REQUIRED) 

P-ST-3087-ST-V4 

$43.50 

38MM OD HOSE, FOR 

65MM Y-TAIL 

P-ST-YTAIL 

$118.50 

MOUNT BAR FOR 

CURVED BOOT 

(2 X BRACKET REQUIRED) 

P-ST-3087-ST-V4 

$43.50 

38MM OD HOSE FOR 

25MM WIDE CURVED 

TAIL P-ST-TAIL-C25 

$100.50 

FERTILISER PROFILED 

THROUGH THE TILLAGE 

ZONE WITH OPTIONAL 

POLYURETHANE FER- 

TILISER BOOT. 

INC. STAINLESS T-BOLT 

CLAMP 

P-FT-PFC-3001 

$36.00 



Cultivators 

TINES WITH 2 X 7/16” BOLT HOLES @45MM CENTRES 

Non-Wetting Soil Weeding 

Machine 

CASE PTX 600 350LB, FLEXICOIL 

265/350LB. C SHANK SHEARER 800 (PRE-2002) 

GASON 5100 

GYRAL AGBOSS 400LB 

AFM 430LB 

Bolts & Nuts for narrow points: 

Points Selection 

See Below 

See Below 

See Below 

Two 2¾”X 7/16” G8 Bolts & Nyclocs (includes extra 

length for fitting boots) torque setting 75 nm, 55 LBFT. 

SUPER SEEDER (60MM WING) 

Tungsten Carbide on leading 

edge and underside of wing 

PR-96-DB-TW 

$88.00 

Single Shoot 

Brackets 

ST-SBB-1 

ST-SBB-4 

ST-SBB-FM-1 

ST-SBA-FM-1 


ANGLED Tungsten Carbide on 

leading edge and wing 

PR-96-DB-ATW 

$99.00 

Dual Shoot 

Fertiliser Brackets 

ST-SBB-1 

ST-DPB-F4 (32MM) 

ST-DPB-LF (38MM) 

ST-DPB-F7 (32MM) 

ST-DPB-LF7 (38MM) 

POINTS ARE TUNGSTEN CARBIDE TIPPED 

FOR EXTRA WEAR LIFE AND EXCELLENT 

PENETRATION 

Seed Boots 

All 

All 

All 

Seed Boot Options 

See Page 21 

12MM HEAVY DUTY KNIFE 


edge 

PR-97 

$104.00 

Double Shoot Boots 

Use the cross-bolt to position the fertiliser 

delivery tube for deep or shallow placement. 

These fertiliser boots are also popular 

for single shoot seeding behind shallow 

working points, but only when sowing at 

depth of working. 

7/16” BOLT HOLES@45MM 

CENTRES 32MM O/D HOSE 

ST-DPB-F4 

$78.50 

7/16” BOLT HOLES @ 45MM 

CENTRES 32MM O/D HOSE 

ST-DPB-F1 

$94.50 

38MM O/D HOSE 

38MM O/D HOSE 

ST-DPB-LF4 

ST-DPB-LF1 

$77.00 $76.50 

Single Shoot Brackets 

ST-SBB-1 

ST-SBB-4 

$51.00 $51.00 

Ultra Tine System 

Upgrade your existing cultivator or chisel plow to an ultra-low disturbance machine with 

these cost efficient, easy-to-fit replacement tines. 

MADE TO ORDER 

(ORDER EARLY) 

Deep Ripping 

• Choice of “T” wing or Narrow knife point with tungsten carbide on leading edges 

• Super slim design for ultra-low soil disturbance and superior stubble flow 

• Various Shank, point and boot designs available to order 



Cultivators 

TINES WITH 2 X ½” BOLT HOLES @45MM CENTRES 

Machine Points 

CASE PTX 600, SHEARER 630, 800 (POST 2002) 

MORRIS* 9000 & 2000 (400, 550LB. TINE) 


See Below 

Single Shoot 

Brackets 

ST-SBB-2-5 

Dual Shoot 


T-DPB-F2-5 (32MM O/D 

HOSE) OR STDPB-LF2-5 

(38MM O/D HOSE) 

Seed Boots 

All 

Non-Wetting Soil 

FLEXICOIL 350LB. EDGE-ON 

See Below 

ST-SBEO-FC 

ST-DPB-EO-F 

All 

BOURGAULT, EZEE-ON, GYRAL AGBOSS HB 

SCARIBAR, GASON VERT. SHANK, SMALE 

SIMPLICITY, PSA SCARI. CONVERSIONS 

See Below 

ST-SBB-4 

ST-DPB-F4 (32MM OD/ 

HOSE) OR ST-DPB-LF4 

(38MM OD/HOSE) 

All 

* Morris Contour Drills: A complete range of point and boot options for these machine is available. Refer page 9 and 10 

for more information. 


See Page 21 




POINTS ARE TUNGSTEN CARBIDE TIPPED FOR 

EXTRA WEAR LIFE AND EXCELLENT PENETRATION 




PR-86-DB-TW 

$127.00 










Angled Tungsten Carbide on 

leading edge and wings 

PR-86-DB-ATW 

$140.00 

32MM O/D HOSE 

ST-DPB-F2-5 

$74.50 

38MM O/D HOSE 

½” BOLT HOLTES @ 45- 

50MM CENTRES 

ST-DPB-LF2-5 

$75.50 

ST-SBB-2-5 

$51.00 $51.00 



edge 

PR-87 

$133.00 

32MM O/D HOSE 

½” BOLT HOLES @ 45-57MM 

CENTRES 

ST-DPB-F4 

$78.50 

38MM O/D HOSE 

ST-DPB-LF4 

$77.00 

ST-SBB-4 

Weeding Deep Ripping 



Chisel Plows 

TINES WITH 2 X ½” BOLT HOLES @ 57MM CENTRES 


Machine 

CASE PTX 600, CONCORD, 

JOHN DEERE, FRIGGSTAD, FLEXICOIL 

550/650 MORRIS 750, SHEARER T/WORKER 

BOURGAULT 

EZEE-ON 

AFM SCARICHISEL 



See Below 

See Below 






PR-86-DB-TW 

$127.50 

Run 

Out 

PR-18-T 

2 ½” RIPPER T.C. TIPPED 

$68.00 









Dividing ridge avoids bringing 

“sour” soil to surface. 

Single Shoot 

Brackets 

ST-SBB-3 

ST-SBB-4 

Dual Shoot 


ST-DPB-F3 (32MM O/D 

HOSE) OR ST-DPB-LF3 

(38MM O/D HOSE) 

Note: use ST-DPB-FTW 

for Shearer T/worker 

(57mm centres) 

ST-DPB-F4 (32MM) OR 

ST-DPB-LF4 (38MM) 

POINTS ARE TUNGSTEN CARBIDE TIPPED FOR 

Seed Boots 

EXTRA WEAR LIFE AND EXCELLENT PENETRATION 

SUPER SEEDER 

(60MM WING) ANGLEDTungsten 

Carbide on leading edge 

and wing 

Run 

Out 

$140.00 

PR-87 

PR-86-DB-ATW $133.00 

All 

All 



edge 

32MM O/D HOSE 

32MM O/D HOSE 

ST-DPB-F3 

ST-DPB-F4 

$74.50 $78.50 

38MM O/D HOSE ½” BOLT 

HOLES @ 57MM CENTRES 

ST-DPB-LF3 

$77.00 $77.00 

ST-SBB-3 

$51.00 

38MM O/D HOSE ½” BOLT 

HOLES @ 45-57MM CENTRE 

ST-DPB-LF4 

ST-SBB-4 

$51.00 


See Page 21 



Scarifiers 

TINES WITH ½” BOLT HOLE 

8” LOW-PROFILE SWEEP T.C. 

TIPPED 

PR-14-T 

$73.50 


Coil Tine Parts for “Convert-a-Drill” 

7” SWEEP T.C. TIPPED 

PR-13-T 

$64.50 

2 ½” RIPPER T.C. TIPPED 

PR-11-T 

$53.00 

One 2/14 x 1/2 G8 Bolts & Nyclocs (includes extra length for fitting boots) torque setting 82 nm, 60 LBFT. 

Pasture Renovation 

DUAL SHOOT 

FERTILISER 

BOOT 

PCT-FT-235 

$60.50 

75MM (INC. 

NYLOCS ) OR - 

UB4A 100MM) 

PCT-UB3A 

$20.00 

“BAKER” T-BOOT 

PR-93-TW 

$65.50 

Tungsten Carbide on leading edge (60mm bolt 

centres) Use two 1½” x 5/16” bolts for Connor 

Shea Coil Tine coulter drill. Use two M10x30 

bolts for Agrow Drill or Duncan Drill & two 1¾”x 

5/16” for Aitchison (NZ) Drill 

PR-94-TW 

$83.00 

Super Seeder 50mm wing with tungsten carbide 

leading edge and underside of wing. Agronomic 

benefits of an inverted-T seedbed with minimum 

disturbance and precise seed placement. 

OR PR-94 $59.00 

With tungsten carbide leading edgeUse one 2 

1/2 x 7/16 G8 Bolt & Nylocs 

COIL TINE MUD 

SHIELD 

ST-MUD-R 

$12.50 

102MM 

PCT-L75A OR 

PCT-L-102A 

FROM $34.50 

SINGLE DUAL 

SHOOT BRACK- 

ET 

PCT-SBB-2 

$24.00 

75MM 

PCT-CP3A or 

102MM 

PCT-CP4A 

FROM $25.50 

MINI T-BOOT 

PR-92-M-TW 

$49.50 

Tungsten Carbide on leading edge (32mm bolt 

centres) Use two 1” x 5/16” bolts for Begg, 

Shearer Tine Drill, Sod Seeder Coulter Tine Drill, 

Trash Culti-Drill, all other machines converted 

with “Caldow” tine adaptors. Note: 2003 Model 

adaptors may have 3/8” boltholes 

KNIFE POINT 

PR-91 

$56.00 

BARE TINE $253.00 

Tungsten Carbide on leading edge 20mm-wide 

Lucerne type point for pasture renovation and 

minimised disturbance of the soil. 

Use one 2 1/2 x 7/16 G8 Bolt & Nylocs. 

DIAMOND (OR VERTICAL) MOUNT TINE 

PCT-D-LH/RH 

Shown with adjustable seed and fixed fertiliser boots, mud shielf and 

residue deflector. 

SLEEVE BARFLOW INSERT 

TO FLEXI BOOT 

RUBBER FLEXI 

BOOT 

ST-RFB (see previous 

page) 

CHOICE OF TAIL 

FERTILISER 

BOOT 

PCT-FT-235 

RESIDUE 

DEFLECTOR 

PCT-TT-4 

POINT 

PR-94-TW 

MUD-SHIELD 

ST-MUD-R 

Non-Wetting Soil Weeding Seeding 

Deep Ripping 



Cultivators & Combines 


EDGE-ON TINES WITH SINGLE 7 /1 6” BOLT HOLE 

Machine 

44 :ALAN JOHNS1, GASON 4100/ 5100, GY- 

RAL, INT. 751, MASSEY, RYAN1, JOHN SHEARER 

580/620, ALFARM, HORWOOD BAGSHAW2 

35:ACKLAND PARKES, ALFARM, H. BAGSHAW 

44: FORWARD 270, JOHN DEERE 

700/275 

35: BLUELINE, DUNSTAN, 

4 FMRS, GYRAL, N H 

1. USE GRADE 10.9, M10 BOLTS WITH RYAN & ALAN JOHNS TINES 


See Below 

See Below 

2. SOME EARLY HORWOOD BAGSHAW SQUARE TINES REQUIRE TINE ADAPTOR PA-63 

$83.00 

DUAL BANDING BOOT FOR 

MOST TINES 

Requires tine clip (TCB series) 

& 1½” X 5/16”Bolt & Nyloc. Advise 

shank type when ordering. 

ST-UNI-R35 

$75.00 

Single Shoot 

Brackets 

ST-SBEO-4 

ST-SBEO-3 

SUPER SEEDER WITH 50MM 

20MM KNIFE POINT 

WING 

Tungsten Carbide Tipped 

Tungsten Carbide on nose & 

PR-91 

underside of wing 

PR-94-TW $56.00 

4” COMBINE POINT, T.C. 

7” CULTIVATOR POINT, T.C. 

TIPPED 

TIPPED PR-9-T 

PR-3-T $61.00 

$41.00 

2” CULTIVATOR 

Tungsten Carbide Tipped 

PR-23-T 

$36.50 

SPEAR POINT, T.C. 

TIPPED PR-42 

$48.50 

Direct fit on Connellan, 

Gyral, Gason, Horwood 

Bagshaw, fitted with spear 

point tines adaptors. Also 

fits Janke 4 with PA 42-1 

adaptor. 

Run 

Out 

OF 35 TINES ORDER 

PR 21-T 7” CULTI. 

$45.00 

SUITS MOST SINGLE BOLT 

TINES Requires suitable st-cb 

tine clip and 1” X 5/16”bolt & 

nut ST-SBEO-4 

$39.50 

SUITS JD 275,753, FORWARD 

270, 853 AND MOST 35 DE- 

GREE TINES 

Requires suitable st-cb tine clip 

and 1” X 5/16”bolt & nut 

ST-SBEO-3 

$41.50 

Adaptor to fit PR-42 

Spear point to 

Janke tines 

PA-42-1 

$45.50 

Dual Shoot 


ST-UNI-R35 WITH 

TINE CLIP (See 

Below) 

ST-FE-270-F 

(32MM OD HOSE) 

44° & 35° STEM ANGLE 

Seed Boots 

All 

All 


One 2½”X 7/16” G8 Bolt & 

Nycloc (includes extra length 

for fitting boots) torque setting 

70 nm, 52 LBFT. 

B-212-716-UNC-G8 

B-N716-UNC-NYL-G8 

DUAL-SHOOT EXAMPLE 

Mud shield 

For dual banding boots 

ST-MUD-R 

$12.50 


See Page 21 



Seeding Boot Selection 

TO SUIT 32MM OD DELIVERY HOSE 

Select Boot 

STANDARD FLEXI BOOT 

ST-RFB 

$49.00 

Direct fit on Connellan, Gyral, 

Gason, Horwood Bagshaw, 

fitted with spear point tines 

adaptors. Also fits Janke 4 

with PA 42-1 adaptor. 

LOW-MOUNT FLEXI BOOT 

Hose mounts lower to match 

long points and avoid bracket 

damage on breakout 

ST-RFB-LM 

$53.00 

Select Tail 

STRAIGHT TAIL (45MM 

LONG) 

ST-RFBTAIL-45 

$21.00 

CURVED TAIL 

ST-RFBTAIL-C 

$23.00 

32, 35 & 38MM TAIL 

Not suited to rocky conditions 

ST-ADJ 

$59.50 

TOP SPIGOT OF FLEXIBOOT CAN BE 

SLEEVED TO SUIT SMALLER HOSE 

WARRANTY 

TO SUIT 38MM OD DELIVERY HOSE 

All rubber Flexiboots 

must have the delivery 

hose (or quality 

substitute nylon hose) 

fully inserted into 

boot for long life and 

Select Boot 

LARGE FLEXI BOOT 

ST-L-RB 

$51.00 

LARGE FLOW-MOUNT FLEXI 

BOOT 

Hose mounts lower to match 

long points and avoid bracket 

damage on breakout 

ST-L-RB-LM 

$59.00 

31.5MM OD X 25MM ID 

WHITE NYLON TUBE 

ST-FB-32TUBE-NY 

$8.00 

38MM OD X 32MM ID 

WHITE NYLON TUBE *also 

available as 30m roll 

ST-FB-38TUBE-NY 

$8.00 

Select Tail 


LONG) 

ST-L-RBTAIL-45 

$26.00 


WIDE TAIL) 

As used on our precision 

seeder bars 

P-ST-LRBTL-25 

$21.00 

TAIL (65MM WIDE) 

Not designed for use 

behind 

narrow points or in rocky 

conditions 

ST-L-RBTAIL-Y 

Seeding 

CURVED TAIL 

ST-L-RBTAIL-C 

$24.50 

HARDWARE ORDERED SEPARATLY. USE 2 OF 

1” X 5/16” BOLTS AND NYLOCS TO MOUNT. 

B-100-516-UNC-G5 

B-N516-UNC-NYL 

$37.50 

ALL RUBBER FLEXIBOOTS ARE 

SUPPLIED WITH QUALITY 

STAINLESS HOSE CLAMPS 



HYDRA 

IMPROVE SOIL 

BETTER CROP FLOURISH 

INCREASE PRODUCTIVITY 

LESS STOPPING VIA VARIABLE 

RATE PROGRAM 

AVAILABLE IN 7,000, 10,000 (2 X 5,000) & 14,000 (2 X 7,000) LITRE 

SIZES 

INCREASE OPERATIONAL EFFICIENCY & 

CROP PROTECTION 

YIELD IMPROVEMENT THROUGH SUPPORTING 

PRECISION IN-FURROW LIQUID INJECTION IN SEEDING 

CHECK FOR SIZES AVAILABLE FOR 2025 SEASON DELIVERY 

INCLUDES A 500L FLUSH TANK 

COMPATIBLE WITH ALL LEADING LIQUID SYSTEMS 

MADE TO ORDER 

PUMP MODULE, PLUMBING/HARNESS LINES & 

INSTALLATION IS IN AN ADDITIONAL COST & CAN BE 

PURCHASED THROUGH YOUR DEALER OR LIQUID SYSTEM 

PROVIDER SYSTEMS 

PROUDLY MADE IN WESTERN AUSTRALIA 

PRIMARYSALES.COM.AU/HYDRA

THE HAY EXPRESS 

STOCKFEEDING IS NOW QUICK, SAFE & EASY! 

Features 

» Robust steel construction 

» 2 tonne rated load capacity 

» Stable, easy-to-tow design 

» Patented mechanism controls feeds-out-rate 

» Superior W A R N winch mechanism 

» Optional breakaway braking system and lights 

» Suitable for 4x4, 4x3 big square bales (with an optional 

kit for 3x3 bales) 

» Tandem load-sharing, roller-rocker spring assemblies 

Benefits 

» One person operation 

» Considerable time and labour saving 

» Saferty first (stay in the cab while feeding out) 

» Low maintenance 

» Wise investment compared with your current 

feed-out methods 

» Can be towed by any vehicle with a tow hitch 

» Feeds hay in “biscuits” so stock can feed from all 

directions with less trampling and wastage compared 

to windrows 

THE HAY EXPRESS UTE MOUNTED 

The “son” of Hay Express mounts easily on any 

substantial farm ute, to provide measured delivery 

of hay when a trailer is not practical or justified. 

Made to the same high quality and durability as the 

tailed version and fitted with cordless remote control 

and a substantial winch. 

PRIMARYSALES.COM.AU/HAYEXPRESS

HARVESTING YOUR CROP 

PROGRAM JUST GOT EASIER 

» REDUCE DOCKAGE AND LOSSES 

» SWAP OUT CONCAVE INSERTS IN MINUTES 

» FITS TO JOHN DEERE, CASE IH & NEW HOLLAND HEADERS 

» IMPROVE GRAIN QUALITY & REDUCE GRAIN LOSS 

PRIMARYSALES.COM.AU/MADCONCAVES 

FAST & SAFE 

COMBINEHARVEST 

LOSS CALBIRATION 

SAVINGS $35,000 (BARLEY) 

8% TO 3% LOSS IN 1,000 HA 

PROGRAM 2T/HA 

INTEGRATED APP 

FOR QUICK & EASY 

LOSS CALCULATION 

PRIMARYSALES.COM.AU/BUSHELS PLUS

THE BETTER ADJUSTABLE UPPER CROSS AUGER 

PROVEN 45% 

INCREASE IN 

PRODUCTIVITY 

» Feed better with the adjustable upper cross Auger. 

Adjustable from the cap. 

» Available for Macdon D60/ D65/D1, FD2, FLEX FD 

70/75, CASE, 3152 JOHN DEERE 600/700 Series. 

PRIMARYSALES.COM.AU/FEEDSTORM 

THE GOLD STANDARD IN FEED DRUM TECHNOLOGY 

» Eliminate blockages & increase ground speed 

» Farmers choice for direct heading 

» Designed by i-paddock & available exclusively from 

Primary Sales Australia 

» Tested by farmers for farmers 

» Agressive pattern of retractable & adjustable fingers 

grabs the crop & steadily pulls through massive crop 

window providing an event flow for threshing 

» Now available for Macdon D1, CA20, CA25 & John 

Deere 6 and 7 series and Midwest 

PRIMARYSALES.COM.AU/TYPHOON

ADAPT-A-GAP 

CROP FINGER SYSTEM 

THE FE-13, 17, 21 AND 30W 

Blue) finger extensions are angled upwards to provide an 

ideal catching area on headers with downwards angled 

knives, directing crop into the front. 

FE PICKUP-2 

This light duty lifter is designed to pick up down or lodged 

crops 

FE PICKUP-1 

For lentils, peas and other ground- hugging crops 

THE FE 13-3,17-3, 21-3 

New 30W-3 (Pink) fingers provide a straight extension of 

the knife guard. They are ideal for header knives which are 

relatively horizontal when lowered. 

FIELD DENSITY FEEDS IN AT WIDTH 

“A” AND IS COMPRESSED TO WIDTH 

“B” FOR MUCH GREATER DENSITY 

AT THE KNIFE. 

21MM GAP USING 

PLATFORM EXTEND- 

ERS 

For sorghum, 

lupins, etc., and shatter-prone 

crops. 

13MM GAP SETTING 

FE 13 (FE-13-3) extensions 

for cereals: 

6 bags/acre, 1.2 

tonnes/ha. 


Alternate FE- 

13(FE-13-3)with 

FE-17(FE-17-3) 

extensions for cereals 

6-0 bags/acre 

1.2-.8tonnes/ha. 


FE 17(FE-17-3) extensions 

for cereals 9-12 

bags/acre, 1.2-1.8 

tonnes/ha 


Alternate FE17 

(FE-17-3) with FE 21 

(FE-21-3) for cereals 

12-15 bags/acre, 2.4- 

3 tonnes/ha 


FE21(FE-21-3) extensions 

for cereals over 

15 bags/acre, over 3 

tonnes/ha 

3.62: 

1 

2.93: 

1 

2.54: 

1 

2.24: 

1 

2.00: 

1 

1.81: 

1 



SNAP-ON EXTENSIONS FOR ADJUSTING GAP WIDTH & ANGLE 

CANADIAN, U.S. AND AUSTRALIAN PATENTS GRANTED 

Simply “snap-on” the appropriate extensions to give the gap width/angle 

you want and start recovering the grain you have previously been leaving 

behind on the ground. 

In light crop densities, cut stalks and heads can be lost over the front 

because there is insufficient field density. 

Also integrates with HWSC to help increase weed seed pickup. 

Optional Extensions 

These optional extensions greatly boost the flexibility, convenience, and efficiency with which crops such as sorghum, lupins, soybeans, chickpeas, and 

faba beans may be profitably harvested. 

The system is very useful for combing-up wind or hail-damaged or tangled crops. The angle adjustable version is the most popular, on which the catching 

area forward of the guard can be adjusted to positions which best suit most header front types and cutter bar positional requirements. 

1 

MAXIMUM UPLIFT 

(FE50WA-P) 

Use on headers with 

downward-angled knives 

FIND 

$85,000 

YOU COULD BE LEAVING ON 

THE GROUND 

DOWNLOAD THE 

“CROP LOSS” 

CALCULATOR 

2 MEDIUM UPLIFT 

(FE50WA-S) 

3&4 STRAIGHT 

(FE50WA-P/FE50WA-S) 

5 MEDIUM PICKUP 

(FE50WA-P) 

6 MAXIMUM PICKUP 

(FE50WA-S) 

Ideal for knives that are 

relatively horizontal when 

lowered. 

Use for combing up of 

down and tangled crops. 

REPLACEABLE 

WEAR STRIP 

FS 10 X 8 

REPLACEABLE 

WEAR STRIP FS 

10 X 8 


Bare 3 finger guards 

for all crops 


FE-13 (FE-13-3) for 

lighter crops when 

using 2” centre 

guards 10 - 13 bags/ 

acre 


FE-30W for lighter 

crops when using 2” 

centre guards 7 - 10 

bags/acre 

32MM GAP 

Using FE 65W-A platform 

extenders on 

2” center guards for 

sorghum, lupins, etc., 

and shatter-prone 

crops. 


Bare 2-finger guards 

for all crops 


For 2-finger guards 

in lighter crops, 

using FE-30W (blue) 

or FE-30W-3 (pink) 

extensions 

1.33: 

1 

2.10: 

1 

2.44: 

1 

3.20: 

1 



Get in Touch 

National 

Customer Service 

(08) 9250 3500 

sales@primarysales.com.au 

Victoria & Southern NSW 

Brian Legg 

0436 608 435 

(08) 9250 3500 

bendigo@primarysales.com.au 

Western Australia 

Michael Bailey 

0407 990 794 

(08) 9250 3500 

sales@primarysales.com.au 

Central & Northern NSW & QLD 

Warrick Finlay 

0429 779 473 

(08) 9250 3500 

dubbo@primarysales.com.au 

South Australia 

Chris Bazeley 

0428 990 973 

(08) 9250 3500 

adelaide@primarysales.com.au 

Trading Terms 

Terms and Conditions 

Terms and conditions relating to purchases of Primary Sales Terms product are 

available from our website. 

Part Return Policy 

Within 14 days of invoice date - No penalty. 

14 days plus of invoice date - A restocking fee may be charged depending on 

circumstances of 20%. After 90 days - Non-refundable. 

Prices 

Are GST-exclusive recommended retail Primary Sales products which 

are effective 1st January, 2024 and are subject to change without notice. Product 

specifications may also change without notice as a result of our commitment 

to product development. 

Warranty 

Original purchasers of all new Primary Sales products enjoy the protection of 

the statutory provisions of the trade practices act. As the set-up and use of tillage, 

seeding and harvesting equipment is affected by variables beyond our control, 

neither the Manufacturer nor any person employed on its behalf - including 

dealers or agents - are liable for any loss or damage, whether consequential or 

otherwise, resulting from the use of its products. 

Warranty may/may not apply where any product is used for other than its 

intended and recommended purpose, or is subjected to pressures, loads or 

conditions beyond that for which it is designed. Should a product not perform 

its intended or recommended function, contact the supplying Dealer (your 

place of purchase). 

Quality 

ISO 9001 

WA Only 

PRIMARY SALES AUSTRALIA PTY. LTD 

ABN 90 608 575 051

Tillage Catalogue 2024

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?