Section 06 Custom Chrome Europe Catalog 2024

6 

ELECTRICAL 

www.custom-chrome-europe.com

Quick Disconnect 

893256 893257 893258 893259 

893271 893272 893273 893274 

Fork Terminal 

893383 

893263 893264 

893278 893279 

893384 893385 893386 893387 893388 

6 

893389 893390 893391 893392 893393 

893394 893395 893396 893397 893398 

Butt Splice 

893260 893261 893262 

893275 893276 893277 

893399 893400 893401 893402 893403 

Ring Terminal 

893404 893405 893406 893407 893408 

893265 

893268 

893280 

893283 

893266 

893269 

893281 

893284 

18-Gauge Wire on Spool 

• On 100 Foot (30 meters) spools in 18 

gauge (1.02 mm) 

• Available in all OEM colors 

893383 Black 

893384 Black/Red Stripe 

893385 Brown/Black Stripe 

893386 Pink/White Stripe 

893387 Brown 

893388 Brown/White Stripe 

893389 Red 

893390 Red/Yellow Stripe 

893391 Red/Blue Stripe 

893392 Orange/Black Stripe 

893393 Orange/White Stripe 

893394 Yellow/Black Stripe 

893395 Yellow 

893396 Green/Blue Stripe 

893397 Blue/Black Stripe 

893398 Blue 

893399 Violet/Black Stripe 

893400 Violet 

893401 Gray 

893402 Gray/Green Stripe 

893403 Gray/White Stripe 

893404 White/Black Stripe 

893405 White 

893406 White/Brown Stripe 

893407 White/Blue Stripe 

893408 White/Violet Stripe 

893267 

Universal Connectors 

• Available PVC fully insulated or heat shrinkable 

• Pack of 25 

22-18 

WIRING (0.7- 

1.2 MM) 

16-14 12-10 

WIRING WIRING 

(1.6-2.0 MM) (2.6-3.2 MM) 

PVC Male 893256 893257 N/A 

PVC Female 893258 893259 N/A 

Heat Sealable Male 893271 893272 N/A 

Heat Sealable Female 893273 893274 N/A 

PVC 893263 893264 N/A 

Heat Sealable 893278 893279 N/A 

PVC 893260 893261 893262 

Heat Sealable 893275 893276 893277 

#8 (4.1 mm) 893265 893268 N/A 

#10 (4.8 mm) 893266 893269 N/A 

#.25” (6,35 mm) 893267 893270 N/A 

Heat Sealable, #8 (4.1 mm) 893280 893283 N/A 

Heat Sealable, #10 (4.8 mm) 893281 893284 N/A 

Heat Sealable, #.25” (6,35 

mm) 

893270 

893282 

893285 

893282 893285 N/A 

6.2

APPAREL 

SEATS & 

TOURING 

BEFORE 

Copper 

Stainless Steel 

AFTER 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Flex Braiding 

• Best protection 

• “Old School” look 

• 25 foot roll 

Copper 

670032 1/2” ID max 

Black Flex 

893412 3/4” ID max 

Black Flex 

DEI Protect-A-Wire 

For a clean look that protects critical wiring and hoses from 

heat. The DEI Protect-A-Wire is great for preventing hardening, 

cracking or shorting. Constructed from high temp resistant glass 

fiber material. Heat treated & saturated with an acrylic binder to 

provide stiffness and frey resistance. Capable of handling direct 

heat up to 500°F. Fuel & chemical resistant. Use when installing 

turn signals, stereos, license plate relocation, auxiliary lighting, 

and GPS units or whatever wiring you may need to protect. 

Includes Military spec shrink tubing. Available in three different 

diameters. Made in the USA. 

660830 Black 10 feet Protect-A-Wire 5mm wide 

660831 Black 10 feet Protect-A-Wire 8mm wide 

660832 Black 5 feet Protect-A-Wire 13 mm wide 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

893417 3/4” ID max 

893373 1/4” ID max 

Stainless Steel 

893374 3/8” ID max 

670030 1/2” ID max 

670031 3/4” ID max 

893375 1/2” ID max 

893376 3/4” ID max 

ENGINE 

Brass Steel 

893411 1/2” ID max 

GASKETS 

TRANNY & 

CLUTCH 

Namz Clear Heat Shrink Tubing 

• Made of durable PVC 

• Used with braided lines to protect painted finishes 

• Will not fade, turn yellow, or crack 

• Shrinks to half of its original size 

• Sold in 25 foot spools 

Clear 

Black 

670033 1/4" I.D. 

670034 5/16" I.D. 

670035 3/8" I.D. 

670036 1/2" I.D. 

670037 3/4" I.D. 

893382 3/32” I.D. 

893381 3/16” I.D. 

893379 1/8” I.D. 

893378 1/4” I.D. 

893380 3/8” I.D. 

893377 1/2” I.D. 

Black ‘Wrap-It’ Wiring Harness Sleeving by 

Russell 

Lightweight oversleeve used to bundle and protect cable 

assemblies and wire harness from chaffing and cutting. The 360° 

self-wrapping feature allows for quick, easy installation and 

removal without tools. Sold in 25 foot rolls. 

27018 1/2"-diameter 

771991 

771995 

771987 

Round It Wire Wrap 

• Add protection and looks 

• A wire can be added or joined to an existing harness with no 

cutting or fishing necessary 

• Sold in 6-foot lengths 

• Black 

771995 1/2” 

771987 1/4” 

771991 3/8” 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

for more details check www.custom-chrome-europe.com 

6.3

918445 

918447 

Lighting Splice Connector 

• Perfect when adding connections or repairing broken ones 

• No tools needed! 

• Easy to use 

• Sold in 5pk 

Unit: Pack, Qty.: 5 

PART# 

DESCRIPTION 

918445 Straight „H“ Style 18-22 Gauge, Two-Wire to Two- 

Wire 

918447 „T“ Style 18-22 Gauge, Two-Wire to Two-Wire 

6 

918444 

918446 

918444 Straight „H“ Style 18-22 Gauge, Single Wire to Single 

Wire 

918446 „T“ Style 18-22 Gauge, Single Wire to Single Wire 

918465 

918467 

Butt Splice with Low Temperature Solder 

Heat Shrinkable Butt Splice with Low Temperature Solder. 


918466 

PART# 

DESCRIPTION 

918465 0,3-0,8 mm² 

918466 1,3-2,0 mm² 

918467 3,3-5,3 mm² 

670823 

670826 

670820 

Deutsch DTM Series 

Connectors 

• For all HD 98-23 models 

• For 14-23 (1.6-0.8 mm) gauge wire 

Male Connectors 

670821 

670828 

670826 2-Position (OEM 74102-98BK) 



670828 6-Position (OEM 74106-98BK) 

670827 



Male Sockets 

670825 

670830 Stamped pins (100) 

Female Connectors 

670829 




670822 




Female Pins 


670830 

670824 

Plug-off Pins 

670042 Plug-off pins (10) 

6.4

APPAREL 

893126 893127 

SEATS & 

TOURING 

670064 670070 670066 670072 

893128 893129 

FOOT 

CONTROLS 

893130 893131 

HAND 

CONTROLS 

670063 670069 670065 670071 

LIGHTING 

670061 670067 670047 670053 

Interface Seals 

893126 2 Position 






ELECTRICAL 

EXHAUST 

INTAKE 

893124 

893123 

Deutsch OEM DT Series Connectors 





893136 

ENGINE 

670061 2-Position, grey (OEM 72122-94GY) 

670046 2-Position, black (OEM 72102-94BK) 



GASKETS 







893135 

TRANNY & 

CLUTCH 




670049 6-Position, black (OEM 72106-94BK) 

670070 6-Position, grey (OEM 72136-94GY) 


DRIVELINE 









893134 

WHEELS, TIRES 

& BRAKES 

Female Sockets 

Male Pins 

670074 Stamped sockets (100) 

893124 Solid sockets (100) 


893123 Solid pins (100) 

Plug-off Pins 

FRAMES 

670025 Plug-off pins (10) 

Deutsch DT-Series 

Sealed Connectors 

893134 4-Position Header 

FORKS & 

SHOCKS 



SHEETMETAL 

Throttle Control 6 Position Connector Kit includes terminals, wire seals 

and TPA lock 

Part#: 918471, Fitment: 18-23 Softail, 17-23 Touring, 17-23 Trike, OEM #: 69201394, Unit: 

Kit, Qty.: 1 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.5

893213 664145 

893216 

664152 

664158 

893214 

664163 

893217 

893215 

664146 

670880 

664153 

664159 664147 

664164 

664154 

6 

664148 664160 

664155 664165 

664149 

664161 

664156 664166 

664150 664162 

664157 664167 

664151 

664168 

664170 

Molex MX-150 Series Connectors 

OEM connectors replacement for Harley-Davidson 07-23 


893213 2-Position, black (OEM 69200271) 



893214 3-Position, brown (OEM 72542-07BN) 

893215 3-Position, green (OEM 75240-07GN) 











Female Crimp Terminals 

664168 Pins (100) 

664169 


893216 2-Position, black (OEM 69200272) 



893217 3-Position, brown (OEM 72542-07BN) 

670880 3-Position, green (OEM 72534-07GN) 










Male Crimp Terminals 

664170 MX-150 Blade Cavity Plugs 

664169 Pins (100) 

Molex Connector 

• Molex (2008-Up) 6-position female connector, (single row) black. Throttle control actuator connector. 

PART# FITMENT OEM# 

897350 16-23 Softail, 08-16 Touring, 16-17 FXDLS with TBW 72483-08BK 

6.6

APPAREL 

670026 

670027 

670076 

670028 

670079 

670029 

AMP Multilock Connectors 

These connectors (sold each) are typically used in lighting 

applications. Fits stock models from 96-23 

• 3-wire connector is used with stock headlight wire harness 

• 6-wire connector is used with stock front turn signals 

• 8-wire connector is used at the main wire harness to the rear 

lighting harness 

• 10-wire connector is used with indicator lights 

Cap Connectors 


SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 



LIGHTING 

670077 6-Position (OEM 73106-96BK) 

670077 

670080 




ELECTRICAL 


670043 

670044 

670083 Pins (100) 



EXHAUST 



INTAKE 


893137 


893139 

893140 12-Position (OEM 73164-96BK 

Plug Connectors 

ENGINE 

670082 Pins (100) 

893138 

893140 

GASKETS 

TRANNY & 

CLUTCH 

670083 

670082 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

670848 670847 670850 670849 

670851 

670852 

AMP Mini Multilock 040 Connectors 

This connectors can be found on all HD Touring models located in 

the fairing or used for heated grip wiring on models 08-19. 

Cap Connectors 

Plug Connectors 

670848 2-Position (OEM 

72902-01BK) 


72904-01BK) 


670851 Pins (25) 


72912-01BK) 


72914-01BK) 

Male Pins 

670852 Pins (25) 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

Fuel Pump Connector 

• NAMZ fuel pump/sender assembly connector kit (HD # 72485- 

07) includes: Connector, terminals, wire seals, and TPA lock. 

PART# 

OEM# 

897349 72485-07 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.7

670092 

670086 

893296 

893297 

893298 

670093 

670087 

893295 

893293 893292 

MX-1900 Series Connectors 

Introduced by the factory in 2011 on the 11-23 CAN-Bus models. 

models, These are some of the smallest water tight connectors. 

670094 

670088 

Connectors 

893296 2-Position female (OEM 72906-11) 

893295 2-Position male (OEM 72905-11) 

6 

893298 4-Position female (OEM 72908-11) 


Pins 

893293 Female crimp terminals (Pack 25), (OEM 72910- 

11/69200308) 

670095 

670089 

893292 Male crimp terminals (Pack 25), (OEM 72909-11) 

670096 

670090 

MX-1900 Pin Housing 

• MX-1900 4-position pin housing (OEM 69201180). 

670097 

670091 

PART# 

OEM# 

897351 69201180 

897352 69201179 

893142 

893144 

670843 670844 

670831 

670841 

670838 670839 

670832 

670842 

670099 

670098 

670836 



72043-71A) 


72034-71) 


72036-71) 


70292-89) 


72037-71) 


70287-81) 


70293-87) 


72278-74) 


889098 Pins (100) 

670837 

670845 670846 

670833 

670834 670835 

AMP Mate-N-Lock OEM Connectors 





72044-71A) 


72035-71) 


72040-71) 


70291-89) 


72041-71) 


70288-81) 


70305-87) 


72276-74) 

Male Pins 

670855 Pins (100) 

670840 

AMP Mate-N-Lock Series Connectors 

• Wire seal on both ends and between connectors 


Cap with Wire Seals Plug with Wire Seals 

670092 2-Position 








670099 Pins (100) 








Male Pins 

670098 Pins (100) 

JST Receptacle 

• JST 6-position receptacle with wire seal. 

PART# OEM# UNIT 

897353 69201162 Each 

6.8

APPAREL 

JST Tab 

• JST 6-position tab with wire 

seal. 


893237 

893238 

1-Position Female Connector 

893147 With wire seal and terminal, for 

BCM Power Connector (OEM 

72350-11) 

SEATS & 

TOURING 

FOOT 

CONTROLS 

897354 69201163 Each 

893236 

670868 

HAND 

CONTROLS 

893300 

893301 

893239 

670869 

OEM Engine Temp Connector 

893150 With terminals, for 95-06 models 

(except Dyna 06), (OEM 72273-95) 

LIGHTING 

ELECTRICAL 

670876 

670878 

893302 

893240 

670870 

OEM Intake Air Temp Sensor 

893151 With terminals, for 95-05 EFI 

models (OEM 72247-95) 

EXHAUST 

INTAKE 

893303 

670866 

670867 

ENGINE 

670875 

670877 

893241 

Delphi Weather Pack 

Environmentally sealed connection system made 

to withstand exposure to extreme temperatures, 

moisture and chemicals with superior performance. 

Connectors with Seals 

Pins and seals 

OEM Throttle Position Sensor 

Connector 

893148 With terminals, for 95-05 models 

(OEM 72280-95) 

GASKETS 

TRANNY & 

CLUTCH 

670879 

JST Series Connectors 

• Super small and water tight 

• For 22-26 (0.71-0.45 mm) 

gauge wire only 



69200305) 



769200306) 


Female Crimp Terminals 

670879 Pins (100) (OEM 

69200307) 




893299 

893236 1-Position male 

893237 1-Position female 







670866 Male crimp terminals 

(Pack 50) 

670867 Female crimp 

terminals (Pack 

50) 

893241 10 repl. wire 

seals 

Oil Pressure Switch Connector 

PART# FITMENT OEM# 

897348 99 FLHT, 99-06 FLHTCUI, 99-02, 

08, 09 FLTR, 99-02 FLTRI, 07-10, 

12-16 FLHTCU, 07 FLHTCUSE2, 08 

FLHTCUSE3, 09 FLHTCUSE4, 10 

FLHTCUSE5, 10-16 FLHTK, 10, 13 

FLTRX, 12 FLHTCUSE7, 13 FLHTCUSE8, 

13 FLHTK_ANV, 13, 16 FLTRU, 14, 

15 FLHTKSE, 15, 16 FLHTKL, 15, 

16 FLTRXS, 11, 15, 16 FLTRUSE, 11 

FLHTCUSE6 

72400-99 

OEM Idle Speed Control 

Actuator & Ignition Coil 

Connector 

893149 Idle speed control actuator for 

models 95-05 and ignition coil 

connector for models 02-05 (OEM 

72263-95) 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 


Male Crimp Terminals 

893299 Pins (100) 

TOOLS & 

EQUIPMENT 


6.9

670863 

893155 

893146 

893153 

670045 

6 

670861 

670864 

Delphi EFI Connectors 

Speed Sensor, Coil and Horn 

670863 Speed sensor and alarm siren, 

06-19 models (OEM 72064-06) 

893155 Mate for CC# 670863 

Throttle Position Sensor 

670861 06-17 Dyna, 06-15 Softail, 06-07 

Touring (OEM 72065-06) 

893157 Mate for CC# 670861 

Idle Speed Sensor, Ignition Coil and 

Speed Sensors 

670864 06-19 models (OEM 72066-06) 

893156 Mate for CC# 670864 

Map Sensor 

893157 

893156 

670860 

670860 04-06 Sportster, 98-03 XL1200S, 

99-17 Dyna, except 16-17 FXDLS, 

00-15 Softail, except 11 FLSTSE2, 

12 FLSTSE3, 13-14 FXSBSE, 14-15 

FLSTNSE, 99-07 Touring, 02-17 

V-Rod (OEM 72230-98) 

670865 

670853 

893154 

893154 Mate for CC# 670860 

Fuel Injector Connectors 

893146 95-05 EFI models (OEM 72244-95) 

893153 Mate for CC# 893156 

670865 06-17 Dyna, except 16-17 FXDLS, 

06-07 Touring, 06-15 Softail, 

except, 11-15 CVO models, 15-20 

Street (OEM 72098-06) 

893152 Mate for CC# 670865 

O2 and Active Exhaust Sensors 

Fits 05-17 Softail & Dyna, 05-16 Touring 

670853 07-13 Sportster, 07-10 Dyna, 

07-11 Softail, 07-09 Touring, 

08-11 V-Rod (OEM 72007-05) 

670854 07-16 Touring, 07-16 Softail, 

07-16 Dyna, 09-16 Trike (OEM 

72012-07) 

Air Temp Sensor 

893152 

670854 

670862 

670862 06-17 models (OEM 72062-06) 

Motor Factory Deutsch 

Connector Builder Kits 

Complete kit contains all the Deutsch 

connectors used on Harley-Davidson 

motorcycles. Both grey and black kits 

comes with tray and order reference chart 

to replenish bins. Each kit contains four 

of the following, with wedge locks, and 

silicone seals. 

12-wire receptacle and plug housings 






Male pins – strip of 100 

Socket pins – strip of 100 

670045 Black Builders Kit 

Mate-N-Lok 

Connector 

• 6 of each 2 and 12 point 

connectors 


connectors 


connectors 

• 100 pins (male & female) 

670085 Builder kit 

Molex Builder Kit 


connectors 


connectors 

• 3 of each 12 and 16 

point connectors 



NAMZ / Dephi & 

AMP Component 

Connector Builders 

Kit 

670872 Wide Delphi/AMP 

selection of cable 

connectors from 

Namz repl. OEM 

72314-01 

Motor Factory Multilock 

Connector Kit 

These AMP connectors are direct 

replacements for those mainly used in 

lighting applications. Ideal for integrating 

aftermarket lighting to connect to 

harness, or to repair existing lighting 

wire harnesses. Comes with tray and 

order reference chart to replenish bins. 

Kit contains eight of cap housing, plug 

housings and connector pins. 

• 2-wire connector 





• Socket pins (pack of 100) 

• Male pins (pack of 100) 

670075 AMP Multilock Connector Kit 

6.10

85091 

APPAREL 

SEATS & 

TOURING 

Mate-N-Lok Connector 

• 6 of each 2 and 12 point connectors 






Universal Mini “U” Barrel 

Crimp Tool 

• MX-1900 JST and Delphi Terminal. 

893294 Tool 

Molex MX-150 Terminal 

Removal Tool by Namz Cycle 

Products 

Molex MX-150 style removal tool. 

Removes both pins and receptacles. Made 

in the USA 

664122 Sold each 

Chrome Cable Ties 

These cable ties feature speciallyprocessed 

chrome-plating to resist 

cracking, and are ideal to dress up any 

wiring job. Sold in packs of 5. 

85090 140 mm (5 1/2"-long) 

85091 160 mm (6 1/4"-long) 

85095 300 mm (11 3/4"-long) 

893247 

893248 

85090 

893249 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

Mate-N-Lok Terminal Removal 

Tools 

Use with AMP Mate-N-Lok connectors. 

664143 Rigid type 

664144 Slide action (shown) 

893242 

893243 

893245 

893244 

670873 

ENGINE 

GASKETS 

Maxi-Fuse Connector 

PART# 

UNIT 

900901 Kit 

Part#: 920005, Length: 160 mm, Unit: 

Each, Qty.: 1 

Delphi-Packard Terminal 

Removal Tool by Namz Cycle 

Products 

A great tool for when working on 

Delphi-Packard weather-pack terminal 

connectors. Made in the USA 


Fuses (Non-Automatic Reset) 

Mini Fuses (Pack of 5) 

893248 2-Amp 

893249 5-Amp 

893247 15-Amp 

ATO Fuses (Pack of 5) 

893242 3-Amp (OEM 72301-89) 

893243 5-Amp (OEM 72302-89) 

893244 10-Amp (OEM 72340-94) 

893245 15-Amp (OEM 72347-94) 

Maxi Fuse (Each) 

670873 40-Amp (OEM 72314-01) 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Replacement Fuse 

This replacement fuse with 40 A fits the 

mo.unit battery cable with fuse and can 

be exchanged easily. 

Part#: 920006, Field of Application: 

For mo.unit battery cable with fuse, 

Description: 40 Amp, Unit: Each, Qty.: 

1 

Terminal Pin/Receptacle 

Extractors 

Use with Molex style connectors on most 

models 07-19. 

400376 Pin extractor 

400377 Receptacle extractor 

Cap Terminals 

893288 OEM Cap terminal (pack 10), (OEM 

9905) 


893250 893251 893252 

893253 893254 893255 

Circuit Breakers (Resettable) 

Blade Style (Each) 

893250 10-Amp (OEM 74586-94) 

893251 15-Amp (OEM 74587-94) 

893252 20-Amp (OEM 74588-94) 

Circuit Breakers (Each) 

893253 10-Amp, accessory 

893254 15-Amp, accessory 

893255 20-Amp, charging system 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.11

17063 



Standard Fuse and Socket 

Kit comes with a 20 amp fuse and a 

socket with 4” leads. Designed for custom 

applications. 

17702 Fuse and Socket 

Electrical Junction 

Blocks 

Universal connection 

blocks have brass-nickel plated links 

and are rated for up to 30 amp loads. 

Available with four, six or eight 

connection terminals. 

17707 Four connections 

17706 Six connections 

17705 Eight connections 

6 

895418 


19295 

895419 

893227 893224 

Fuses Holder 

893224 30-Amp AGU fuses (Pack 5) 



893227 AGU Fuse holder 

893232 AMP Power plug kit 

Solid State Turn 

Signal/Hazard Flasher 

Stock replacement 12-volt, two 

pin solid state flasher. Can be used as a 

turn signal flasher or hazard flasher. Fits 

all models from 65-83. 

640881 Replaces OEM 68543-64C 

Circuit Breakers by Standard 

Top-quality electrical parts for a wide 

variety of Harley-Davidson applications 

from the manufacturer of Blue Streak 

Performance Products. Sold each. 

17064 15 amp (repl OEM 74587-94) 

17063 15 amp (repl. OEM 74589-73) 

17062 30 amp (repl OEM 74599-77B) 

617526 40 amp (repl OEM 74600-97A) 

17061 50 amp (repl. OEM 74600-94) 

895418 Circuit Breaker With 10-32 Stud 

And 2 1/4” Blade Terminals 

Spades, 30 AMP 

895419 Circuit Breaker With 10-32 Stud 

And 2 1/4” Blade Terminals 

Spades, 40 AMP 

19295 Circuit breaker clips/rivets. Pack 

of 10. 17064 

NAMZ Sealed ATO Fuse Holder 

670857 For 14 gauge wires 

4-Way ATC Fuse Block 

Sealed cap, this 4-way ATC fuse block 

allows you to connect your wiring using 

crimp-on spade terminals. 

893246 4-way ATC fuse block 

Hazard Flasher 

D.O.T. approved stock 

replacement 12-volt, two-pin bi-metal 

(type) hazard flasher unit for all models 

from 65-90 (except 69-90 Touring models). 

640880 Replaces OEM 68541-64B 

Electric Terminal Plate 

A perfect reproduction of the Original 

Equipment part. Fits FX and FL models 

from 70-77. 

35633 Replaces OEM 72300-70 

Motor Factory Circuit Breakers 

American-made replacement circuit 

breakers for most models. 

25200 30 amp. Fits FL models from 

70-72 with mounting bracket 

(repl. OEM 74586-70) 

25201 30 amp. (repl. OEM 74559-77) 

25202 15 amp. (repl. OEM 74589-73) 


of 10. 

Circuit Breaker Clips 

Reproductions of the stock zinc-plated 

parts. Includes aluminum rivet. Used many 

applications to hold the turn signal flasher 

unit and the circuit breaker. 


of 10. 

893304 893305 

Toggle Switch 

• 5-Amp 

• Requires a 1/4” hole for mounting 

893304 High/low beam 

893305 Momentary ON & DUMP function 

(perfect air ride fill switch) 

6.12

APPAREL 

17720 

17728 

SEATS & 

TOURING 

17719 

17727 

Standard Toggle Switches 

Toggle switches are a high quality parts 

for custom applications. 

17719 Small toggle switch on/off spade 

terminal 

17720 Toggle switch 3 position 9” leads 

17727 Toggle switch 3 position spade 

terminal 

17728 Toggle switch on/off screw terminal 

Universal Toggle Switch 

Handles 6 or 12-volt applications up to 

35 amps. It was used for the spotlamps 

on 4-speed FL models from 62-84 and 

Heritage Softail Classic models from 87-03. 

26097 Toggle switch, replaces OEMs 

67844-70, 67858-89 

RST toggle switches 

687855 RST 3 position toggle switch 

687856 RST 2 position toggle switch 

Dakota Digital MLX-3012-K 

Fuel Light Resistor Pack 

• When swapping the OEM speedo-tach 

gauge on 14-Up Street or 15-Up Road 

Glides to a single Dakota Digital MLX- 

3012-K, you will need this module in 

order to get the proper fuel reading on 

your gauge. 

• Plugs in between the fuel pump 

connection under the seat and taps 

switched power from the RED unused 

purge solenoid connector on top the 

battery tray. 

• Heat-sealable butt splice is pre-installed 

for easy hook up. 

Part#: 925142, Fitment: 15-18, 20-21, 

23 FLHXS, 15 FLTRUSE, 15-23 FLTRXS, 

16-19 FLTRU, 18-23 FLHX, 18 FLHX 

ANV, 18-23 FLTRX, 19 FLXHS, 20-23 

FLTRK, 22-23 FLHXST, 22 FLHX, 22 

FLTRXST, 23 FLHXANV, Fitment Note: 

In combination with Dakota Digital 

MLX-3012-K single speedometer, Unit: 

Pack, Qty.: 1 

893347 

893346 

Complete Motorcycle Wiring 

Harness 

• OEM color-matching harness with 

11-second self canceling turn signal 

module 

• Fuse block holds a full size, commonly 

available & replaceable starter relay and 

(3) ATO fuses 

• A 30-Amp circuit breaker is installed 

and is ready for any regulator/charging 

system 

• Harness provides running light and 

turn signal functions to the front turn 

signals, run, brake and turn signal 

functions for the rear turn signals 

• Oil, neutral, high beam, and turn signal 

indicator wiring 

• Color matching handlebar switch wiring 

like 96-13 models 

• Headlight wiring with headlight socket 

and terminals 

• Front turn signal connectors and 

terminals 

• Rear fender harness with connectors 

and terminals 

• Key switch wiring with ring terminals 

• Coil wire with ring terminals, 

tachometer, horn, oil sending unit, 

brake switch and neutral switch wiring 

with terminals 

• Sections of 3/16”, 1/4”, 3/8” and 1/2” ID 

heat shrink included 

• Heavy gauge 12 (+) power and (-) 

ground wires with terminals for battery 

connection 

890142 Complete motorcycle wiring harness 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Stainless Steel Push Button 

Switch 

Made of stainless steel, sold each. 

619408 Push button switch 

MD Ground Clip 

This clip simplifies the ground connection 

to the handlebar and to the attached 

switches. Makes electric installation easier 

and safer. 

653382 Ground clip 

893348 

OEM Complete Ignition 

Harness 

Plug-n-Play with the 3-position Delphi connector 

and the 3 stand-alone mating male crimp 

terminals. 

893346 OEM 32435-99 

893347 OEM 32435-00 

893348 OEM 32435-01 

EFI Harness 

• Match OEM H-D specs 

• Simple, plug-and-play installation 

• Made in the USA 

PART# FITMENT OEM# UNIT 

897363 

02-05 Dyna, 

02-05 Touring, 

02-05 Softail, 02- 

05 V-Rod, 02-05 

Sportster 

70233- 

02 

Each 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.13

899865 899866 

6 

899867 899868 899869 

Feuling O2 Sensors 

Precision made 

Meet or exceed OE specifications 

Assembled in the USA 

PART# DESCRIPTION FITMENT OEM# UNIT 

899865 

899866 

899867 

899868 

899869 

12mm Oxygen Sensor, Black 

Connector 29“ OAL, 4 Wires 

12mm Oxygen Sensor, Grey 

Connector, 29“ OAL, 4 Wire 

18mm Oxygen Sensor 12.5“ 

OAL, 2 Wire Sensor 


OAL, 2 Wire Sensor 


0AL, 2 Wire Sensor 

OE Replacement Twin Cam Bagger 

OE Replacement Twin Cam Bagger 

Each 

Each 

07-08 Touring (incl. CVO) front, 09 Touring (incl. CVO) rear 27719-07 Each 

08-10 FXDF front/rear, 06-09 FXDL front/rear, 06-11 FXDB front/rear, 06- 

09 FXD front/rear, 06-11 FXDC front/rear, 06-11 FXDWG front/rear, 07-09 

FLSTSSE front/rear, 07-09 FXSTSSE front/rear, 10-11 FLSTSE front/rear, 09- 

10 FXDFSE front/rear, 07-08 FXDSE front/rear, 09-11 FLSTSB front/rear, 07 

27683-06 Each 

FLSTSC front/rear, 08 FXCW/C front/rear, 07 FLSTN front/rear, FXSTD 07-11 

front/rear, 07 FXST front/rear, 07-08 FXSTB front/rear, 07-11 FLSTC front/ 

rear, 07-11 FLSTF/B front/rear, 07-11 Sportster front/rear, 09 Touring (incl. 

CVO) front, 07-08 Touring (incl. CVO) rear, 09 V-Rod front 

08 V-Rod front/rear, 09 V-Rod rear Each 

18mm O2 Sensor 

Wide band Lambda 02 sensor, fits auto tune modules and dynos. 5 wire, broadband, flat contacts in connector. 

Part#: 917815, Field of Application: For Auto Tune Modules and Dynos, OEM #: 27719-07, Unit: Each, Qty.: 1 

6.14

APPAREL 

SEATS & 

TOURING 

920465 920466 920467 920477 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

920469 920470 920471 

EXHAUST 

Oxigen O2 Replacement Sensor 

• Direct fit, no modifications needed. 

• Extra high temperature dual shield end 

• Improved engine performance 

• ISO 9001 and TS 16949 certified manufacturing plant 

• Meets or exceeds OEM specifications 

Unit: Each, Qty.: 1 

PART# FITMENT FITMENT DESCRIPTION OEM # 

NOTE 

920461 07-13 Sportster, except 08-10 XR1200, 10-13 XR1200X, 07-09 Touring, 09 Trike Front only 2 Wire 7 1/2“ 27719-07 

920462 07-09 Touring Rear only 2 Wire 11 1/2“ 27683-07 

920463 08-11 V-Rod 2 Wire 17 1/2“ 27703-08 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

920464 10-16 Touring, 10-16 Trike, 15-20 Street Front only 27729-10 

920465 10-16 Touring, 10-16 Trike Rear only 27809-10 

DRIVELINE 

920466 12-17 Dyna, 12-17 Softail, 12-17 V-Rod Front only 32700005 

920467 12-17 Dyna, 12-17 Softail, 12-17 V-Rod, 14-20 Sportster Rear only 32700006 

920468 14-20 Sportster Front only 32700026 

WHEELS, TIRES 

& BRAKES 

920469 08-10 XR1200, 10-13 XR1200X 27690-08 

920470 17-20 Touring, 17-20 Trike Front only 32700046 

920471 18-20 Softail 32700083 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.15

6 

mo.unit blue Control Box 

• The mo.unit blue is the digital control unit for your motorbike, the heart of the entire on-board electrical system. It can be 

operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also 

performing fuse functions. There are considerably fewer relays and individual components in the wiring harness and the vehicle 

can be rewired with less effort in a very short amount of time. 

• Features WITH smartphone and mo.ride App 

• Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and mo.unit blue energy usage 

• Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone) 

• Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.) 

• Alarm system mode and sensitivity can be adjusted 

• The on board voltage can be monitored in the App 

• Diagnostics on all inputs and outputs; current, voltage and device temperature measurement 

• Real-time audio fault messages issued via the helmet headset. 

• Outputs can be switched manually via smartphone (except for starter) 

• Firmware updates provided anywhere via smartphone and App without removal. 

• Setup menu can be configured anywhere via smartphone and App without removal 

• Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for 

maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc 

• Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks 

• Parking position display and Ping! for help locating the vehicle 

• LIN bus connection for connecting to compatible motogadget products at a later date. 

PART# 

UNIT 

900292 Each 

922804 922803 922802 917437 917438 

i.LASH Vehicle-Specific Adapter Cable with Integrated Simulation Electronics for Rear 3in1 DF 

Lights 

• The i.LASH products contain all parts so the indicator frequency is correct and dashboard warnings do not appear. The equipment 

includes two adapter cables for the indicators with conncetors that fit the vehicle, if necessary with integrated adaption 

electronics and if necessary a load-independent flasher relay. 

• Vehicle compatible plug connection 

• Very easy installation 

• Usual flashing frequency 

• No dashboard warnings 

• Undisturbed operation of all Kellermann LED-indicators 

Unit: Set, Qty.: 1 

PART# FITMENT FITMENT NOTE DESCRIPTION 

922802 18-20 FLSL, 18-19 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 

For Rear 3 in 1 DF Turn Signals 

FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 18-20 

FXFB, 18, 20 FXFBS 114, 18-20 FXLR, 18-20 FXBB, 19 FXFB 114, 20 FXLRS 

922803 14-20 Sportster For Front and Rear 3 in 1 DF 

Turn Signals 

922804 13-17 Softail For models with For Rear 3 in 1 DF Turn Signals 

standard 3in1 

indicators 

917437 18-20 Scout Bobber For Front Turn Signals 

917438 18-20 Scout Bobber For Rear 3 in 1 DF Turn Signals 

6.16

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

i.SED 3-In-1 Turn Signal Module 

• For mounting Indicators with higher wattage than original, 

indicators on vehicles where the ground is „plus“ but not 

„minus“ as usual or „DF“ products on vehicles where the 

indicators ground is switched but not the plus as usual. Note: 

On some models, the “LED displays” option must be activated 

PART# FITMENT DESIGN UNIT 

912573 

14-20 Sportster, 12-17 

Dyna, 11-23 Softail, 14- 

i.SED - V 

23 Touring, 14-23 Trike, 

12 

21-23 Sportster RH, 21-23 

Pan America 

Set 

i.BOS Turn Signal Module 

• Provides correct function of the control and hazard 

light, e.g. when using DF versions for Harley Davidson 

models with Can-Bus. 

PART# DESIGN UNIT 

912572 i.BOS - CL 1 Set 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

m.button 

Another innovation from motogadget: the m.button. 

It’s a big help - in combination with the new m.unit blue, basic and m.unit v.2 

- in reducing ‘cable clutter’ and simplifying wiring harnesses. Integrated into 

the handlebar tube - or any other adequate location - this tiny cylinder will 

electrically connect all handlebar instruments, switches and buttons. Using 

state-of-the-art bus technology, the m.button digitally processes signals and 

transmits them to the m.unit over a thin cable. The electrical consumers 

will then be switched inside the m.unit. All control wires are moved into 

the handlebar. This saves space, weight, labour and time. A ‘must have’ for 

custom bikes with clean-look handlebars. 

690974 mo.Button 

CBW1 Can-Bus Resistor 

• The CBW1 resistor provides a required electrical load for your 

vehicle, which, if the dip switches are set correctly, will result 

in no flashing of the accessory flashers in the cockpit. If the 

accessory indicators fail due to an electronic fault, an error 

message is immediately displayed in the cockpit. Up to 2 

channels can be operated, such as turn signals at the rear left 

and turn signals at the rear right. The CBW1 can also be used 

on vehicles with original LED turn signal equipment. 

• Dimensions: Height = 11mm, Width = 31mm (without straps), 

Width = 46mm (with tabs), Length = 40mm 

• Cable length = 200mm with pins 

• Resistance values: 150 ohms, 200 ohms, 170 ohms, 240 ohms, 

300 ohms, 400 ohms, 600 ohms, 1200 ohms 

PART# 

UNIT 

913218 Each 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Front ABS 12“ Extension Harness 

• 12“ extension 

• Allows a simple way to safely lengthen your front end while 

still having ABS connected properly 

• 100% Plug-n-Play 

Fitment Note: ABS Models, Length: 304.8 mm, Unit: Each, 

Qty.: 1 

PART# 

FITMENT 

921795 08-23 Touring, except 17-22 FLHR, 17-18 FLHRC, 18-23 

FLHRXS 

921796 17-22 FLHR, 17-18 FLHRC, 18-23 FLHRXS 

CB2 Position Light Control Box 

• With few work steps install the CB2 PL CONTROLBOX between 

the 2in1 indicator and activate a new great safety feature. 

During the flashing process, the CB2 box switches the position 

light off and starts only again after the flashing process. Thus, 

the flashing signal is better perceived in road traffic. 

• Dimensions: Diameter: 11 mm, Length: 17,5 mm 

PART# FITMENT UNIT 

913219 Not suitable for headlights with position light. Pair 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.17

912995 

6 

895525 895524 

Wire Plus 105-Series Wiring System 

The ultimate chopper-style wiring system! It features a solidstate 

breaker pack (breakers that will never burn out) that 

measures only 1" x 1" and is molded in waterproof epoxy with 

diagnostic LED’s. The pre-assembled harness is configured for an 

automotive start switch (switch sold separately) which eliminates 

start circuit wiring in the harness. This system is supplied with an 

installation kit that allows the builder to add indicator and turn 

signal wires. Custom applications. 

640362 Complete kit 

TLT Moto CAN Switchbox 

To convert handlebar controls, tacho or speedo on CAN Bus 

equipped models. This switchbox makes it possible! To ease up 

the connection to the bikes harness we offer a handlebar and a 

speedometer cable kit separately. For more detailed instructions 

visit our dealer store! 

912995 TLT CAN switchbox 

895524 TLT handlebar-cable-kit 

895525 TLT speedometer-cable-kit 

912574 

912575 

6.18 

Brake Light Switch 1/8“ Female Crimp Terminal 

1/8“ Female Crimp Terminal, 22-16 Gauge, with heat shrink. Fits 

1969 to 1981 brake switches. 

Part#: 918459 , Fitment: 69-81 Sportster, 71-81 FX Shovel, 

69-81 FL Shovel , OEM #: 9904 , Unit: Pack , Qty.: 10 

Turn Signal Relay 

• All necessary components required for installation are included 

• Simple installation in feed to the indicator switch or swap the 

original 2-3 pole flasher relay 

• Connection to indicator control light also possible 

• Restricts the accompanying flashing of non-activated 

indicators 

• Load-independent / steady flash rate 

• Switching capacity 0,5-50 watt 

• Very small dimensions 22 x12 x 6 [mm] (L/W/H) 

• Suitable for indicator switches 

• Suitable for 6 and 12 volt DC applications 

PART# FITMENT DESIGN UNIT 

912574 R1 Each 

912575 

In certain cases the hazard warning 

flasher must be deactivated. 

R2 

Each

APPAREL 

920478 920479 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

920480/-81 920482 

LIGHTING 

MD Cycle Control Box 

The cycle control box is one of the smallest units on the market. 

It allows the use of push buttons for functions such as hi-low 

beam, turn signals left and right, horn and last but not least it 

even has an option for a starter button! The unit can be used 

with conventional or LED turn signals. Due to its size it can be 

installed almost anywhere on the bike, even in the headlight! 50 

mm x 45 mm x 21 mm (2” x 1 3/4” x 0.8”) 

681572 MD Cycle Control Box 

681897 MD Cycle Control Box including hazard light function 

681898 MD Cycle Control Box including hazard light and self 

canceling turn signal function (17 seconds) 

920483 920484 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

920485 

GASKETS 

TRANNY & 

CLUTCH 

MD Cycle Control Databus System 

This little unit has the same functions as the standard MD Cycle 

Control box but instead of running five wires through and out of 

your handlebar there is only one wire that comes out and goes 

to the module which is hidden somewhere on the bike! There is 

no way to get a cleaner look. Detailed instructions included. 


OEM Replacement Crank Sensor 

• These are designed to be a direct replacement Crank sensor 


PART# FITMENT OEM # 

920478 99 Dyna, 99 Touring 32497-99 

920479 00-03 Dyna, 00-03 Touring 32798-00 

920480 00 Softail 32707-00 

920481 06-20 Sportster, 06-17 Dyna, 01-17 Softail, 32707-01C 

04-16 Touring, 09-16 Trike 

920482 02-17 V-Rod 32313-01 

920483 04-05 Dyna 32798-04 

920484 04-05 Sportster 32804-04 

920485 18-20 Softail, 17-20 Touring, 17-20 Trike 32700048 

920486 95-98 Touring 32447-95 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.19

681988 

6 

motogadget mo.Flash Relay 

• Incredibly small and lightweight - just 

a cable with a tiny device the size of a 

mint 

• Perfect for Custom Bikes with limited 

space – no more clumsy OEM flasher 

relay 

• Laying cables together with the 

mo.Flash inside a handlebar, frame tube 

or directly on the wiring loom 

• Completely load independent (widerange 

indicator relays) – always stable 

and correct flash rate 

• Suitable for all flasher types: LED, Micro 

size, 10 Watt, or 21 Watt 

• No bulky load resistors necessary 

• It works with 1 or 2 or 4 flashers in use 

• Instant, loss less flash light operation 

• Very easy to install – just connect the 

two wires 

• Completely waterproof 

• Short - circuit - proof 

• Automatic overload shut down 

• Safe against high voltage spikes 

• Generates no heat during operation 

• Operating voltage from 5V to 18V 

• Also suitable for 6 V vehicle voltage 

systems 

• Made by motogadget in Germany 

681988 MG RELAY mo.Flash 

motogadget mo.Relay+ 

The mo.Relay+ is a true combination of 

a load independent digital turn signal 

relay with push button functions. 4 modes 

are available by pushing the buttons in 

different time frames: 

• Changing lines: short fingertip on 

the button - turn signal flashes 3x, 

automatic shut off after 3rd flash 

• Turning: short push of the button - 

flashes 10x, automatic shut off after 

10th flash 

• Permanent: push longer the button - 

will turn off after second push of the 

button when needed 

• Hazard warning flasher by pushing 

both buttons for left and right side 

together 

The m-Relay+ is load independent 

(1-100W) and works with almost every 

possible light combinations such as LEDturn 

signals, micro-turn signals, halogenturn 

signals, 10W or 21 Watt filament 

lamps and delivers a constantly stable 

flash mode. Bright and efficient turn 

signal lights caused by a very efficient 

microelectronic. 

653346 m Relay+ 

mo.Relay - a small electronic 

relay to switch high current 

devices with tiny loads 

The mo.Relay is a small, compact relay 

to switch almost all kind of devices like 

e.g. horn, ignition etc. The mo.Relay 

moves high loads and currents directly 

to the switched devices (the front 

lamp for example). Thus enhances 

electrical reliability of your bike and 

reduces voltage drops in power supply 

significantly. The load und current at the 

handle bar switch gear and also at the 

ignition lock is reduced to a minimum. 

So you can use cables with very small 

diameter at the switch gear. Damaged 

and scorched contacts or cables will never 

happen again. The absence of voltage 

drops let shine your lights much brighter 

and enhances your security on the road. 

A threaded hole in the center of the 

housing enables fast and easy mechanical 

installation almost anywhere at the 

bike - especially when you use multiple 

units. The housing of the mo.Relay is 

CNC machined and black anodized. It is 

internally molded and completely water 

proof and vibration resistant. Two red 

cables allow the connection of devices 

for 12V power supply and up to 20A load 

current. The two black cables allow the 

connection of the switch gear. Please 

note! the mo.Relay is not intended as a 

control unit for push button gear. Outer 

diameter 19 mm, Hight without cable 

19mm 

682834 MG mo. relay 12V 20A 

682347 

682346 

Spare parts for mo.Lock 

The mo.Lock is a contact free digital ignition lock with RFID 

technology and substitutes mechanical ignition locks or their 

electrical switching feature respectively. 

• RFID technology is tamper-resistant 

• each key has a unique code 

• the key first activates the mo.Lock without touching it and 

then, via the relay, the entire on-board system 

• neither key nor mo.Lock suffer from mechanical wear 

• the key requires no battery - failsafe 

• no overload or scorched pins possible due to indirect 

switching via the 40 A main relay 

• the mo.Lock is very compact an can be mounted hidden in 

many places 

• water tight and vibration resistant because of the 

moulded-in construction 

• depending on the model, key sizes range from very small 

(key fob sized) to tiny (glass vial) and may be integrated 

into other objects like gloves, clothing, pendants (NON- 

METALLIC!) etc. 

• keys can be easily purchased and 'learned' to any mo.Lock - 

your integrated locksmith 

• a switching distance of 4 - 5 cm ensures convenient 

switching while excluding the possibility of accidental 

engagement 

• An integrated LED shows the status of the mo.Lock while 

mounting, connecting and 'teaching' new keys 

Dimensions and specifications 

Transmitter/receiver, diameter of 

installed assembly: 30 mm, Height: 

14 mm, Cable length: approx. 50 

cm, Weight incl. cable: approx. 30 

g, Fixture: 2 x M3 threaded hole 

on back side, Operating voltage: 

6V - 18V, Operating temperature: 

-20 °C... +80 °C 

Parts delivered 

Transmitter/receiver, diameter of 

installed assembly: 30 mm, Height: 

14 mm, Cable length: approx. 50 

cm, Weight incl. cable: approx. 30 

g, Fixture: 2 x M3 threaded hole 

on back side, Operating voltage: 

6V - 18V, Operating temperature: 

-20 °C... +80 °C 

Spare parts 

682346 mo.Lock key teardrop 

682347 mo.Lock key glass tube 

682348 mo.Lock relay 12V 50A 

682349 mo.Lock backing capacitor 

6.20

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

mo.lock NFC Ignition Switch 

• NFC technology is tamper-resistant 

• Each key has a unique code 

• The key first activates the mo.lock without touching it and 

then, via the relay, the entire on-board system 

• Neither key nor mo.lock NFC suffer from mechanical wear 

• The key requires no battery 

• No overload or scorched pins possible due to indirect switching 

via the 40 A main relay 

• The mo.lock NFC is very compact an can be mounted hidden in 

many places 

• Water tight and vibration resistant because of the moulded-in 

construction 

• Keys can be easily purchased and ‚learned‘ to any mo.lock NFC 

- your integrated locksmith 

• A switching distance of 2 - 4 cm ensures convenient switching 

while excluding the possibility of accidental engagement 

• An integrated RGB-LED shows the status of the mo.lock while 

switching, connecting and ‚teaching‘ new keys 

• Included parts: mo.lock NFC, 2 keys, 1 automotive relay, 

12V/40A, Detailed installation and operating instructions 

Part#: 924915, Field of Application: We do not recommend 

using the mo.lock in conjunction with an immobilizer. 

Please ask your dealer whether the immobilizer can be 

deactivated., Color: Black, Unit: Set, Qty.: 1 

mo.lock NFC Full Wiring Kit 

As a complete solution, the mo.lock wiring harness enables very 

quick and easy installation of the mo.lock in the vehicle‘s onboard 

network. 

Simply plug the relay supplied with the mo.lock into the 

appropriate relay socket on the wiring harness, connect three 

prepared cables to the mo.lock and connect two eyelets to the 

battery poles - done! No soldering or crimping is required. 

All cables are pre-assembled and the integrated 40A main fuse 

protects the new electrical system centrally and safely. 

• Cable from relay via fuse to +12V and ground: 60 cm 

• Cable from relay to mo.lock NFC: 150 cm 

• Cable from relay to vehicle electrical system: 150 cm 

• integrated relay socket 

• integrated 40A main vehicle fuse 

• pre-assembled battery connection (M6 eyelets) 

Part#: 924916, Unit: Set, Qty.: 1 

mo.lock NFC Replacement Key 

The mo.lock NFC key is a replacement key for the mo.lock 

NFC ignition lock. Up to 125 keys can be trained on a mo.lock. 

Teaching in additional keys requires at least one key that has 

already been taught in. 

Part#: 924918, Unit: Each, Qty.: 1 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

mo.lock NFC Replacement Bracket 

Part#: 924919, Color: Black, Unit: Each, Qty.: 1 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

mo.lock NFC Connection Cable 

The mo.lock NFC connection cable is a high-quality, 2m long, 

3-wire cable for connecting the mo.lock NFC and fits the cable 

cover included with the mo.lock. 

Part#: 924917, Unit: Each, Qty.: 1 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.21

Custom Chrome Turn Signal Load Equalizer 

Very small designed load equalizer exclusively for Custom 

Chrome. 


6 

Custom Chrome Load Equalizer II for CAN-Bus 

models 

The Load Equalizer II compensates the load differnce between 

the LED unit and the board system on 11-23 Softail, 12-17 Dyna, 

14-23 Touring, 14-20 Sportster, 14-23 Trike, 15-20 Street. To be 

used with LED taillight, brake light and turn signals. 

652728 Load Equalizer II 

604920 

912596 

Turn Signal Load Equalizer 

912597 

PART# FITMENT DESCRIPTION 

912596 

63-13 Sportster, 91-11 Dyna, 


85-94 FX Model, 63-65 

Panhead, 66-84 FL Shovel, 71- 

84 FX Shovel, 02-17 V-Rod 

Without Can-Bus 

11-23 Softail, 12-17 Dyna, 14- 

23 Touring, 14-20 Sportster, 

912597 

14-23 Trike, 15-20 StreetWith 

Can-Bus 

for use with LED Lights 

for use with LED Lights 

On some models, the 

“LED displays” option 

must be activated 

Intensifier HI/LOW Modules 

All Badlands Intensifier High/Low Modules are designed 

to provide an inexpensive method to convert a (1) wire 

incandescent, Halogen or LED light into a dual function or HI/ 

LOW light. Example, if you are installing an old school tail light 

that has only (1) wire for illumination and (1) wire for ground 

you would need our IHL-01 Module. This module will allow you 

to have running and brake light illumination on that (1) single 

wire! If you purchased a new pair of turn signals and they only 

have (1) wire for illumination and (1) wire for ground, you would 

need our IHL-02 Module. You would install this module to the 

front or rear turn signal output wires and a protected switched 

12+ power source. Then the output of our module would feature 

turn signal and running light functions on (1) wire per side. If 

room is an issue, (custom bike application) our IHL-03 Intensifier 

will perform the same functions of our IHL-02 but are only rated 

for 500-milliamps maximum. 

TYPE OF 

CONNECTION 

Hard-Wired 

DESCRIPTION 

Single light intensifier 

(Universal) 

PART# 

604920 

6.22

APPAREL 

SEATS & 

TOURING 

12690 

604909 

890080 

604908 

FOOT 

CONTROLS 

HAND 

CONTROLS 

36924 

890078 

890081 

890082 

LIGHTING 

ELECTRICAL 

699997 604924 

890079 

EXHAUST 

Load Equalizers I, II, III and for CAN/BUS Models 

All Badlands Load Equalizer Modules are designed to provide you the ability to use small incandescent bulbs, Halogen bulbs or LED 

style (module operates both front & rear) turn signals without a rapid flash. (INSTALL OUR MODULE BEFORE YOU INSTALL YOUR 

NEW LIGHTS!) A “rapid-flash” is caused by the factory turn signal module not seeing the specific amperage draw that the factory 

installed 1156/1157 bulbs provided. Whether you have a Plug-n-Play module or the hard-wired version, Load Equalizer Modules all 

work the same. 

LOAD TYPE OF 

EQUALIZERS CONNECTION DESCRIPTION 

LED 

READY 

PART# 

I Hard-Wired All models 73-99 No 12690 

II 

Hard-Wired 

All models 73-99. Same as the version 1 but with emergency flasher capability , 

when the bike is shut off. 

No 36924 

III Hard-Wired All 91-13 models Yes 699997 

III 

Plug-n-Play 

FLH 96-13 (except Street & Road Glides 10-17), FX & Dyna 97-13 (except Rocker), 

XL models 99-03 

Yes 604908 

III Plug-n-Play XL 04-13 Only Yes 604909 

III Plug-n-Play Street Glides and Road Glides 10-13 Only Yes 604924 

FOR CAN/BUS MODELS 

FRONT USE ONLY 

CAN/Bus 

REAR USE ONLY 

CAN/Bus 

Plug-n-Play 

Plug-n-Play 

14-20 Sportster, 12-17 Dyna, 11-23 Softail, 14-23 ToFitment neu, 11-23 Softail, 

12-17 Dyna, 14-23 Touring, 14-20 Sportster, 14-23 Trike, 15-20 Street On some 

models, the „LED displays“ option must be activated 

Softail 11-17, FXDF 12-17, FXDB/P 12-17, FXDWG 12-17, FLD 12-17, FXDC/L 12-17, 

FLSTC 12-17, FLSTF/B 12-17, FLSTN 12-17, FXST 12-17 

Yes 890078 

Yes 890079 

CAN/Bus Plug-n-Play FXSB 12-17, FLS 11-17 Yes 890080 

CAN/Bus Plug-n-Play XL 14-20 Yes 890081 

CAN/Bus Plug-n-Play All Touring Models 14-23 Yes 890082 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

Plug & Play Illuminator Module 

• Like all Victory Motorcycles, Indian front nor rear turn signals have the running light feature. The module installs in minutes and 

adds the running light feature to front turn signals. 

PART# 

FITMENT 

900899 15-17 Indian Bagger, 14-17 Indian Cruiser, 15-17 Indian Touring 

900900 15-23 Indian Scout 


LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.23

604900 

6 

918462 

Illuminator Run, Brake and Turn Signal Module 

All Badlands Illuminator Modules are designed to provide you 

running light, brake light and turn signal functions to each rear 

turn signal. These modules also have a built-in Load Equalizer 

which is perfect when switching out factory turn signals to 

halogen or LED versions. 

Color: Black, Unit: Kit, Qty.: 1 

PART# 

FITMENT 

604900 99-03 Sportster, 97-11 Dyna, 96-10 Softail, 97-13 

Touring, except 10-13 FLHX, 10 FLHXSE, 10, 13 FLTRX, 

11 FLHXSE2, 12 FLHXSE3, 12 FLTRXSE, 13 FLTRXSE2, 13 

FLTRXSE2 ANV 

918462 19-20 FXDRS 114 

Badlands Illuminator Pro Module 

This new module is a custom builders dream, and it also works perfectly 

on stock models. It has several of our existing modules built into one 

to control every feature you would want your turn signal system to 

do. Automatic canceling, front running lights and turn signal on single 

filament halogen or incandescent bulbs and LED’s, rear running lights, 

brake light function and turn signals on single filament halogen or 

incandescent bulbs as well as LED’s. A built in load equalizer runs LED’s 

and up to 70 watts per corner / each station. You can cancel at any time 

for a quick lane change and this module has emergency flasher mode that 

does not build up heat. 

• Built in automatic canceller 

• Built in load equalizer 

• Front run & turn signal for single filament bulbs, halogen 

bulbs & LED’s 

• Rear run, brake and turn signal functions like our 

“Illuminator” module 

• Emergency flasher without heating up 

• Cancels at any time for quick lane changes 

604904 Illuminator Pro 

12675 

604902 

Hard-Wire Super Load Equalizer 

This Plug-n-Play CAN/Bus Load Equalizer is needed to prevent 

brake light BCM trouble codes when removing center taillights 

on 2011-Up HD CAN/Bus models. 

Part#: 918463, Fitment: 14-20 Sportster, 12-17 Dyna, 11-23 

Softail, 14-23 Touring, 14-23 Trike, Unit: Each, Qty.: 1 

75567 

75566 

Self-Cancelling Turn Signal Modules 

These are Original Equipment items. Excellent for stock 

replacement or custom projects. 

75567 Replaces OEM 68540-96 

75566 Replaces OEM 68537-83G 

PART# 

604901 

604903 

Self Cancelling Modules 

Designed to provide a less expensive alternative to the factory 

flasher module. This modules are not only a built in 11-second 

flasher but are also a Load Equalizer which allow you to use 

small incandescent bulbs, halogen bulbs or LED’s without any 

rapid-flashing issues. They also have a 4-way flasher feature for 

safety or parade mode just like the factory flasher unit. Whether 

you have a Plug-n-Play module or the hard-wired version, they 

all work the same. 

TYPE OF 

CONNECTION 

12675 Hard-Wired 

DESCRIPTION 

Universal on 73-90 models 

without self canceling or Custom 

Bikes 

604901 Plug-n-Play FLH 87-93, FX 90-93, XL 92-93 

604902 Plug-n-Play 

604903 Plug-n-Play 

All 94-99/2000 models (until 

Delphi TSM system with 

8-Position MALE Deutsch 

Connector) 

All 94/2000 models (Until Delphi 

TSM System) 

6.24

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Marker Light X Box 

Marker lights at motorbikes are allowed since some years and 

it is a big safety plus, cause the bike is easier to recognize 

from other traffic. Many manufacturers had developed flasher 

indicator / marker light combinations. However, the contrast of 

the direction indicators is very low in some combinations due 

to the high brightness of the marker light. Our Marker Light X 

module switches off the marker light in the moment when you 

switch on the direction indicator at one side. This increases the 

contrast of the turn signals and makes it easier to be seen from 

other traffic. The implementation of the module is very easy and 

it fits in the most handlebars due to it´s small dimensions. 

Part#: 917974, Length: 38 mm, Height: 11 mm, Width: 16 

mm, Unit: Each, Qty.: 1 

Version H Electronic Box 

• The box is able to control the main electrical functions of your 

motorcycle from a central location. 

• Light control with switch and push button possible 

• Flasher control with switch and push button possible 

• Emergency flash function 

• 2 x flashes when ignition on 

• Comfort flasher function 

• Control of horn 

• Control of starter relais 

PART# HEIGHT LENGTH WIDTH 

902034 25 40 12.5 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

Brake 2 Flash Control Module 

• This is a small brakelight-modulator for having more visibility 

in traffic. It gives a significant plus in motorbike safety. 14 

different flash programs can be chosen. 

• Wakes up motorists behind you 

• Provides more safety 

• 14 different flasher mode ajustments 

• Easy programming 


902045 11 38 16 

Version D Electronic Box 

• This electronic box version D controls the main functions of 

your motorbike in combinations with switches or push buttons. 

• Flasher control with button or a switch 

• Auto flasher off function, emergency flasher, „Low Light“ dim 

modus adjustable 

• Control of low and high beam with 2 buttons or a switch 

• Control of starter relay and motor off with 1 or 2 

buttons*Control of horn 

• Brake light control 


902035 12 50 42 

Touch 2 Switch 2-Channel Relay 

This electronic relay has 2 independent channels. Each output 

can drive 70 Watt. The small size allows installation in the 

handlebar or headlight. You can switch different loads with one 

push button. Two different inputs allow you to control each 

output with the pushbutton, whether the pushbutton is wired to 

ground or + 12V. The Touch 2 Switch module can also be used as 

a standard toggle switch relay. Just connect the thin brown input 

cable directly to ground and the thin blue input cable directly to 

+ 12 volts. That‘s it. Now the module switches between output 

1 and output 2 when you press the button wired to the thin 

purple cable. 

• Inputs for non-locking push-button switches in separate mode 

and for locking switches if the channels are linked together. 

• You can use very thin cables for the connection between the 

buttons and the module 

• 2 independent channels, that can be linked together in order 

to increase the maximum load to 120 Watt. 

• The small dimensions allow an implementation in the most 

handle bars. 

• The module can also work as voltage inverter. 

• Push-button switch (not latching) with connection to chassis or 

to + 12 Volt 

Part#: 919976, Length: 38 mm, Height: 11 mm, Width: 16 

mm, Unit: Each, Qty.: 1 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.25

Handlebaradapter for D-Box or C-BS Wiring 

Harness 

• Watertight cast housing 

• Connections 0.14mm², 20cm length 

Part#: 921939 , Color: Blue , Length: 25 mm, Height: 8 mm, 

Width: 10 mm, Unit: Each , Qty.: 1 

Multi Flasher Relay 

• This is a small flasher controller for pushbuttons in a small 

package what will fit in every handlebar. A comfort flasher 

function is integrated which will switch off the indicators after 

a while if no button is pushed. 

• Emergency flash function 

• 2 x flashes when ignition on 

• Flasher function with automatic off 

• 2outputs, 5A each 


902046 11 38 16 

6 

6 Booster 6V to 12 V Converter 

This module is a 6 Volt to 12 Volt converter. It allows the 

implementation of modern 12 Volt equipment, like led 

indicators, rearlights or speedos in a vintage bike that still have a 

6 Volt charger system. The maximum usuable load is 3 Watt or 2 

Watt constant load. The module fits in the handlebar or even in 

most LED rearlights due to it´s small size. 

Part#: 919977 , Length: 20 mm, Height: 8 mm, Width: 12 

mm, Unit: Each , Qty.: 1 

Mini Switch Relay 

• The box is able to control the main electrical functions of 

your motorcycle from a central location with switches or push 

buttons location. 

• Light control with switch or button mode possible 

• 2 Outputs, 5A each 

• “Lights off when ignition on“-possibility 

PART# 

HEIGHT LENGTH WIDTH 

902047 11 38 16 

Air Ride Control Relay 

• This Air Ride memory unit saves and recalsl the pump up time 

and the valve open time. It allows the user to save and recall 

individual heights of your bike. 

• Control of „pump“-time and „valve open“-time 

• Press on the button recalls the saved time 

• 2 outputs, 200W continous / 350 peak each 


902040 12.5 40 25 

Nano Flasher Relay 

• Smallest electronic flasher relay on the bike market 

• Handles loads between 0,1 Watt and 42 Watt 

• Replaces the standard flasher relay in custombikes 

• Glued in an ABS housing. 

• Works with LED lights or traditional halogen bulbs 


902048 5 15 9 

Vari Load Load Equalizer 

• You know the szenario: you have installed the new beautful 

led flashers in your bike and now you have trouble with the 

flasher speed cause the new led lights have a much lower 

power consumption compare to the old bulbs, leading in 

faster flashes or any kind of other trouble with your ecu 

in your bike. However You can buy and try different load 

equalizer for your bike until you have spend much time and 

money and have found the right load equalizer for your bike. 

• The load is simple adustable by touching and holding the blue 

cable to + 12 Volt or ground. A touch and hold to + 12 Volt 

increases the load up to 10 Watt. Touching and holding the 

blue cable to ground result in a decrease of the load down to 

0 Watt. A flashing led indicates the change of the load and 

the preset number. The led is permanent on if the minimum 

or maximum value is reach and switches off when you remove 

the blue cable and the adjusted value is stored in the Vari Load 

as preset. The time between the lowest load value and the 

maximum load value is about 20 seconds. 

PART# 

UNIT 

914348 Each 

6.26

APPAREL 

Automatic Daytime running light switch 

• This electronic relay contains 2 power outputs what can drive 

60 Watt / each. A daylight sensor detect if the ambience light 

is dark or bright and the device switch between daytime 

running light and low beam, depending of the ambience light. 

The switch time from daytime running light to low beam is 

immediately for situations when you ride from a bright place 

in a darker place. The switch time from low beam to daytime 

running light is adjusted to 3 seconds in order to get the the 

light sensitivity down against light reflections. You can adjust 

and store the trigger value of the ambience light in 60 steps. 

PART# 

UNIT 

914346 Each 

Ground Split Terminal Splitter 

Many electrical problems at the bike result from a bad 

connection to the minus pole of the battery. The chassis is often 

in use as minus pole, which is not the best connection due to 

rust, paint or dirt at the contact screw. The Gnd-Split is a 4 

pin divider that can be screwed directly to the minus pole of 

the battery. It can split up to 4 cables with a maximum size of 

AWG14. 



Elektronicbox Version B 

The B-Box is our response from some clients, who prefer an easy 

mechanical implementation of the control box in a bike and who 

don´t take care about a bit bigger size compare to our other 

devices. The B-Box can be controlled with the standard ignition 

switch. 8 implemented status led´s allow a fast check while the 

installation or the adjustment of the different functions. A 20 

Ampere inline fuse in the main line is integrated. However, the 

outputs are short circuit protected and self resetting. 

• Functions: 

• Switch - output for parking light / Plate light / speedo etc. 

• Ignition (with or without side stand switch control) 

• Starter (with or without neutral switch control) 

• Headlight with button or switch control 

• Integrated flasher relay, control with buttons or switches 

• Brake light with flasher option 

• Horn 



SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Multi Flasher Plus Relay 

This is a small flasher controller for pushbuttons in a small 

package that will fit in every handlebar. This device is controlled 

via 12 Volt inputs, what make it easier to implement in an 

existing OEM harness if no minimal wiring is required. An auto 

cancel function can be activated. It switch off the indicators after 

a while if no button is pushed. 



TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Flasher Merger 

The Flasher Merger is connected between the 2 direction 

indicators and the indicator led in the dashboard or speedo. Two 

diodes are implemented. The module allows the control of one 

indicator led for both flashers. The maximum load is 100 mA or 

1,2 Watt. The module is waterproof potted what makes it simple 

to install without the need to wire 2 diodes, insulate it and try to 

get it waterproofed. 



Minimal Indicator 

The minimal indicator is a small microcontroller module and 

a 3-color LED. The controller drives the different colors of the 

LED and allows to indicate all necessary functions of your bike 

with just one LED. Allows to display 2 or 3 events at the same 

time easily. The small dimensions allows the implementation 

inside the head light or even in the handle bar. Cleans up your 

dashboard for a much cooler look. 

• You can indicate the following functions with one LED: 

• Flasher left and right 

• High beam 

• Neutral 

• Oil Pressure 



FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.27

Multi Flasher C 

Have you exchanged your oem indicators for LED devices and 

are still having problems with the flashing frequency of the turn 

signals being way too high? The Multi Flasher C (The C stands 

for constant frequency) convert any flasher frequency or even 

a permanent switched output of the OEM flasher relay to 90 

flashes/minute. 



Speedometer and Instrument Extension 

Harness 

NAMZ Speedometer / Tachometer Extension Harness 15“, 

Fits Sportster 1999 – 2006, Dyna 1999 – 2006. Allows for easy 

relocation of speedo/tach cluster when using tall risers. 

• 15“ long OEM wire colors, terminals and connector 

installed. 

• Includes heat shrink tubing 

• Rider must de-pin OEM connector for easy installation 

6 

Part#: 918456, Fitment: 99-06 Sportster, 99-06 Dyna, 

Length: 381 mm, Unit: Kit, Qty.: 1 

Woven Cloth Split Loom 

Woven Cloth Split Loom, an easy to use spring-bound wire loom. 

Available in assorted 4 ft and 8 ft. 

• Perfect for harness repairs when fishing through heat-shrink is 

not possible. 

• Easy to use and cut 

• Kit includes 3 sizes 

Unit: Kit, Qty.: 1 

PART# DESCRIPTION LENGTH MM 

918453 For diameter 

1/8“,1/4“,3/8“; 8‘ ft long 

918452 For diameter: 

1/2“,5/8“,3/4“; 4‘ ft long 

2438 

1219 

OEM Replacement Accessory 12 Volt Power 

Connection 

OEM Replacement electrical power connection for 

navigation, audio, heated grips or charging ports. Supplies 

ground, switched and 12+ battery power without CAN/Bus 

interference. 

Part#: 918440, Fitment: 18-23 Softail, 17-23 Touring, 17- 

23 Trike, OEM #: 69201599A, Unit: Each, Qty.: 1 

Speedometer Extension Harness for Indian 

Chief 

Handlebar Control Xtension Harness, 15” longer than stock for 

any size handlebar. 

• Easy to install 

• 100% plug-n-play 

• Allows riders to install taller bars, taller risers or relocate their 

speedometers on ALL 2022-Up Indian Chief Models 

• Color matching wire, OEM connectors and covered with PVC 

extruded tubing for a “finished” look 

Part#: 924992, Fitment: 22-23 Chief Dark Horse, 22-23 

Chief Bobber Dark Horse, 22-23 Super Chief Limited, 23 

Chief, 23 Chief Bobber, 23 Super Chief, 23 Sport Chief, 

Length: 381 mm, Unit: Each, Qty.: 1 

Female H9 and H11 to Male H4 Connector 

Headlight Adapter Pigtail 

Headlight adapter pigtail, with (female) H9 & H11 to 

(male) H4 Connector. Fits all models with 7“ headlights 

when using 2014-Up Road King dual LED headlight. 

Part#: 918442, Fitment: 86-13 Touring, except 86-93 

FLTC, 89, 91-95 FLTCU, 96 FLTCUI, 99-03, 07-09 FLTR, 

99-06 FLTRI, 09 FLHX, 09 FLTRSE3, 10, 13 FLTRX, 11 

FLTRUSE, 12 FLTRXSE, 13 FLTRU, 13 FLTRXSE2, 13 

FLTRXSE2 ANV, 09-13 Trike, 15-16 FLRT, 12, 14-16 FLD, 

13 FLD103, 86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90- 

00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 FLSTN, 

01-06 FLSTCI, 01-06 FLSTFI, 05 FLSTFSE, 05-06 FLSTNI, 

06 FLSTFSE2, 10-12, 14-17 FLSTFB, 12, 14-17 FLS, 12 

FLSTSE3, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 

13 FLSTF 103, 13 FLSTFB 103, 13 FLSTN103, 14-15 

FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS, Unit: Each, Qty.: 1 

6.28

APPAREL 

SEATS & 

TOURING 

893338 

Headlight & Passing Lamp Adaptor Harness 

893349 For 90-04 models using 4” auxiliary lamps (each) 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Front Turn Signal Harness 

• Stainless steel braided and clear coated 

893338 24” 

893339 36” 

893339 

NAMZ Replacement Headlight Socket & 

Terminal Kit 

670874 Repl. OEM 72047-71 

ELECTRICAL 

EXHAUST 

INTAKE 

Turn Signal Extensions by Namz Cycle Products 

A must when installing taller bars, these practical turn signal 

extensions are the cleanest way to extend the wires and retain 

factory colors. 

Fits 96-13 Sportster, 96-11 Dyna, 96-10 Softail 

664137 4” 

664138 8” 

Fits 16-23 Softail, except 16-17 FLSTC, FLSTN, 18-20 FLDE, 

18-23 FLHC, FLHCS. 

897355 4" 

897356 8" 

897357 12" 

897358 15" 

ECM Connector 

• ECM 36 Pin connector kit with connector, strain relief, retainer 

lock, seal, & terminals. 


897364 72078-00 Kit 

MD Mini Solid State Relay for Hi-Low Beam 

Very small solid state relay for use with push buttons to switch 

between hi and low beam. Due to ist minimal size it can be 

installed inside the headlight and switches from low to high 

beam at the touch of a button. 30 mm x 30 mm x 15 mm (1.18” x 

1.18” x 0.6”) 

681573 

H9 and H11 to H4 Connector Headlight 

Adapter Pigtail 

• NAMZ Headlight Adapter Pigtail, with mating H9 & H11 to H4 

Connector 

• Used when removing OEM dual-bulb Headlight and replacing 

with standard 7“ universal LED light 

Part#: 918441, Fitment: 14-23 Touring, except 15-16 

FLTRUSE, 15-23 FLTRXS, 16-19 FLTRU, 18-23 FLTRX, 18-19, 

21-22 FLTRXSE, 20-23 FLTRK, 22-23 FLTRXST, 22 FLTRKSE, 23 

FLTRKSEANV, Fitment Note: H9 and H11 to H4 Pigtail, Unit: 

Each, Qty.: 1 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.29

6 

Speedometer & Instrument Extension Harness 

for Sportster and Dyna 

Speedometer / Tachometer Xtension Harness 15“. Allows for easy 

relocation of speedo/tach cluster when using tall risers. 

• 15“ long OEM wire colors, terminals and connector installed 

• Includes heat shrink tubing 

• Rider must de-pin OEM connector for easy installation 

Plug-n-Play 8 to 6 Position Multilock Rear 

Fender Harness 

• Simple to install 

• 38 ¾ inches long 

• A perfect matching OEM color-coded wiring harness 

• Complete with OEM 8-position connector that attaches under 

the seat and the 6-position connector that connects into the 

rear taillight circuit board. 

• All NAMZ wiring harnesses are made in the USA 

Part#: 918437, Fitment: 97-09 Touring, 99-03 Sportster, 97- 

11 Dyna, 96-10 Softail, Fitment Note: Touring Models only 

97-13 Electra Glide, 98-09 Road Glide, 06-09 Street Glide, 

Description: 8-Position Multilock to 6-Position Multilock, 


20“ Plug and Play Speedometer and 

Instrument Extension Harness 

Part#: 924881, Fitment: 15-16 FLTRUSE, 15-23 FLTRXS, 16-19 

FLTRU, 18-23 FLTRX, 18-19, 21-22 FLTRXSE, 20-23 FLTRK, 22- 

23 FLTRXST, 22 FLTRKSE, 23 FLTRKSEANV, Unit: Each, Qty.: 1 


Harnesss 

NAMZ Plug-n-Play Speedometer & Instrument Extension Harness, 

36“ Fits 2014-Up Road King & Sportster, 2012-2016 Dyna, 2011- 

Up Softail Models (except FXBB, FXBR, FXBRS). Allows for easy 

relocation of speedometer and indicator lights. 


Softail, except 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 

114 ANX, 18-20 FXBB, 20-23 FXST, 21-23 FXBBS, 21-22 

FXBRS, 22-23 FXLRST, 14-18 FLHRC, 14 FLHRSE, 16-22 FLHR, 

18-23 FLHRXS, Length: 914.4 mm, Unit: Kit, Qty.: 1 


Harness for M8 Softail 

NAMZ Speedometer & Instrument Extension Harness, 100% Plugn-Play, 

32“ long extended replacement, Fits 2018-Up Street Bob, 

Breakout, FXDRS & 2020 Softail Standard Models. 

• 16“ longer than the OEM/factory harness 

• 100% Plug-n-Play and installs in minutes 

Part#: 918464, Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 

18 FXBRS 114 ANX, 18-20 FXBB, 19-20 FXDRS 114, 20-23 

FXST, 21-23 FXBBS, 21-22 FXBRS, 22-23 FXLRST, Length: 

812.8 mm, Unit: Each, Qty.: 1 

OEM Speedometer and Rear Fender Tri-Bar 

Light Connector Kit 

OEM Speedometer/Tachometer and rear Fender Tri-Bar Light 

Connector Kit, includes (12) Female Terminals. 


Softail, 04-23 Touring, 09-23 Trike, 21-23 Sportster RH, 21- 

23 Pan America, 17-20 Street, OEM #: 72130-04, Unit: Pack, 

Qty.: 12 

6.30 

12 V Power Connection 

PART# FITMENT OEM# UNIT 

897365 14-16 Touring, 14-16 Trike 69200722 Kit 

Replacement Headlamp H4 Pigtail 

NAMZ replacement headlight H4 pigtail for all models with H4 

headlight harnesses, includes connector, heatshrink, installed 

terminals on #16-gauge wire at 6“ long. 

Part#: 918443, Field of Application: For all Models with H4 

Light Socket., Unit: Each, Qty.: 1

APPAREL 

893233 

SEATS & 

TOURING 

670856 893223 

FOOT 

CONTROLS 

893231 

893229 

893222 

HAND 

CONTROLS 

LIGHTING 

Fairing Radio Plugs 

670856 23-Position radio plug (OEM 

72382-98BK) 

893223 23-Position radio plug Header 

plug 

893222 35-Position radio plug (OEM 

72384-06BK) 

893221 Female terminals (OEM 72381- 

98) Pack 50 

893228 

Radio Amplifier Accessories 

During your amplifier installation, you 

may want have these items. Our noise 

filter will reduce any buzz in your speakers 

caused by your charging system. A Hi/ 

Low module is perfect for cleaner signal 

when using OEM radio with an amp. RCA 

cable is perfect when adding an amp or 

component. 

893231 In-Line RCA Cable noise filter for 

engine noise reduction 95-23 

Touring, 09-23 Trike 

893228 Hi to Low level converter for 

OEM radios with amplifiers 95-23 


893233 3-Foot Gold plated RCA cable, 

oxygen free wire 

893230 

Radio Amplifier Installation 

When installing an external power 

amplifier on your motorcycle you will 

need either one of our wiring kits. The 

#10 gauge kit is intended for up to 

600-watts and the #8 gauge kit is for up 

to 900-watts. Both come with everything 

you need to install an amp properly the 

first time! 

893229 #10 Wire, 2 RCA cables, fuse, holder 

and terminals 

893230 #8 Wire, 2 RCA cables, fuse, holder 

and terminals 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

AMP Power Plug Kit 

893232 AMP Power plug kit 

893286 

893287 

OEM Speaker Connectors 

This is the ones used by the factory since 1994. 

893286 187” Female terminal (pack 20), 

(OEM 72294-94) 94-23 Touring, 

09-23 Trike 

893287 25” Female terminal (pack 20), 

(OEM 77290-94) 94-23 Touring, 

09-23 Trike 

Rear Speaker Harness 

To use with the stock HD radio, perfect for 

rear speakers (flash required) 

893234 Rear speaker harness, HD radio only 

OEM HD Radio Connector/BCM 

Connector Kit with mating 

terminals in (3) gauge sizes 

OEM 2014-Up Harley Davidson Radio 

Connector/BCM Connector Kit with 

mating terminals in (3) gauge sizes. 

Part#: 918469, Fitment: 14-23 Touring, 

14-23 FLHTCUTG, 18 FLHTCUTG ANV, 

20-22 FLHTCUTGSE, 23 FLTRT, Fitment 

Note: Only for HD models equipped 

with OEM radio, OEM #: 69200193, 


DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.31

893361 893359 

664181 

6 

Switch Controller for 

Can/Bus Models 

So you you want to change 

out your stock handlebar 

controls on your 11-17 Softail 

or 12 & 17 Dyna? This module 

allows you to choose any 

brand switch assembly you 

want! Attach the wiring 

directly to our color matching 

wired module, plug in the 

other end into the wiring 

harness of the bike and it´s 

done! 

890141 14-23 Bagger models 

Note: Will not work with keyless ignition 

models. 

‘VOES’ Switches 

These are Original Equipment 

parts. Replacement vacuum 

operated electric switch. 

895451 Fits XL / XLS / XLX 

83-85, FXR 48-90 (repl. 

OEM 23557-83) 

895452 Fits FXST, FLST, Dyna, 

FXR 91-95 (repl. OEM 

26566-91) 

75295 Fits Softail, FXR and 

Dyna Glide models 

from 91-95 (repl. OEM 

26566-91) 

75294 Fits Softail and 

4-speed FX models 

from 84-90 and 

Sportster models from 

86-93 (repl. OEM 

26558-84) 

75293 Fits FXR models from 

84-90 and Sportster 

models from 83-85 

(repl. OEM 26557-83) 

O2 Sensor Extension/ 

Adapter Kit by Namz 

Cycle Products 

Got your eye on that perfect 

exhaust system for your 

Bagger but it only fits up to 

2009? Well the crew at Namz 

has solved that problem with 

this slick new kit. It’s fast and 

easy to install; simply plug it in 

between the front O2 sensors 

and the OEM wiring harness 

and install the reducer plugs 

into the O2 sensor ports on 

the exhaust header and thats 

it your done! Also works for 

2012 and later Softails and 

Dynas. 

664180 O2 Sensor extension/ 

adapter for all 10-17 

Touring models and 

12-17 Softails and 

Dynas 

664190 O2 Sensor extension/ 

adapter for all 10-17 

Touring models 

and 12-17 Softails 

and Dynas without 

connectors 

681983 

681984 

Wiring Bypass 

Connector from Pistor 

This little item makes the 

usage of aftermarket exhausts 

or aircleaner systems possible. 

It overrules the engine 

electronic, warning lights will 

not come up after mounting 

aftermarket systems. 

681983 Bypass connector for 

aftermarket exhaust 

systems 

681984 Bypass connector for 

aftermarket aircleaners 

MODEL/ 

YEAR 

SPORTSTER V-ROD DYNA SOFTAIL TOURING 

2006 N/A N/A 893359 N/A N/A 

2007 

2008 

2009 

2010 

2011 

2012 

2013 

670884 

Inline 

Enrichment 

Devices 

A simple plug-n-play 

fuel management 

upgrade for your bike. 

Nightrider´s unique 

patented design works 

with your existing 

OEM O2 sensor 

and ECM allowing 

richer fuel mixtures. 

Recommended for 

stock bikes and those 

with exhaust/intake 

changes. 

2014 N/A 

2015 N/A 

2016 N/A 

664182 

670884 

664181 

670884 

INLINE 

ENRICHMENT 

DEVICES 

664181 

670884 

664183 

893360 

664182 

664181 

670884 

664183 

893360 

TARGET 

AFR 

664181 

670884 

664183 

893360 

664183 

AFR 

SETTING 

893361 14.2:1 Fixed 

893359 14.3:1 Fixed 

664182 14.0:1 Fixed 

664181 13.8:1 Fixed 

664184 13.8:1 Fixed 

664183 13.9:1 Fixed 

893360 14.3- Adjustable 

13.8:1 

670884 14.3- 

13.8:1 

Adjustable 

2017 N/A N/A 

664181 

670884 

670884 

664184 

664183 

893360 

664183 

893360 

6.32

APPAREL 

664120 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Throttle-by-Wire 

Extension Harness by 

Namz Cycle Products 

Namz new Throttle-by-Wire 

harness is ‘plug-n-play’ and 

a no brainer when installing 

taller handlebars. It is longer 

than stock and is one size fits 

ALL handlebars. Simply remove 

the OEM harness and plug this 

one in. It comes complete with 

OEM connectors installed for 

simple installation. 

Heated Grip Wiring 

Extension Kit 

The must for models with 

taller handlebars. 

893352 96-07 models 

Universal Tachometer 

Harness 

Compatible with most factory 

and aftermarket tachometers 

893428 Universal 

893334 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

664120 Fits all Touring models 

from 08-13 

893335 

EXHAUST 

897359 4" Long, 16-23 

Softail, 16-23 Touring, 

16-23 Trike 

897360 8" Long, 16-23 


16-23 Trike 

897361 12" Long, 16-23 


16-23 Trike 

897362 15" Long, 16-23 


16-23 Trike 

893331 

Universal Headlight 

Harness 

• Harness fully assembled 

• With a clear layer PVC 

893423 Universal 

CAN/Bus Handlebar 

Switch Harness 

Same harness like OEM but 

much longer to install the 

tallest ape hangers without 

cutting, splicing, soldering or 

messing with the new CAN/Bus 

BCM module. Lenght 48”. 

893336 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

893333 For T14-23 Touring, 

except 14-23 Roadking, 

14-23 Trike, except 15-23 

FLRT 

WHEELS, TIRES 

& BRAKES 

893332 

Handlebar Wiring 

Covers 

• Use it when you making 

your own wiring 

• Includes two pieces of 

braided steel wiring hose, 

black & clear heat shrink 

and four Namz logo shrink 

ends. 

893331 For internal wiring 

893332 For “stock” external 

wiring 

Handlebar Wiring 

Harness Extensions 

for CAN-BUS models 

by Namz Cycle 

Products 

These new plug-n-play wiring 

harness extensions will allow 

for an easy install of tall 

handlebars on the new CAN- 

BUS equipped Softails. Fits 

14-20 Sportster, 12-17 Dyna, 

11-23 Softail 

664185 Extension 4 inch 

length 


length 


length 


length 

Momentary Switch 

Converter Module 

Allow you using momentary 

(ON) switches for headlights 

and a run switch the ability to 

toggle as a HIGH/LOW switch 

and a kill, ON/OFF switch. OEM 

color matching wires, heat 

shrink and instructions. 

893329 Switch converter 

module 

893337 

Universal Handlebar 

Wire Extensions 

Just cut and solder it! 

Terminals already installed, 

24” long, matching colors and 

heat shrink included. 

893334 Touring 96-06 models 

only 

893335 All models 96-06 (except 

Touring) 

893336 Touring 07-13 models 

only 

893337 All models 07-13 (except 

Touring) 893334 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.33

OEM Replacement Engine Coolant Temperatur 

Sensor 

• These are designed to be a direct replacement for the OEM 

part 

Part#: 920491, Fitment: 02-13 V-Rod, OEM #: 32315-01, 


6 

OEM Replacement Engine Temperature Sensor 

• These are designed to be direct replacement for the OEM part 

Part#: 920490 , Fitment: 04-17 Dyna, 01-17 Softail, 99-16 

Touring, 09-16 Trike , Fitment Note: Only EFI Models. , OEM 

#: 32446-99 , Unit: Each , Qty.: 1 

Plug-n-Play Rear Fender Harness 



• Complete with OEM 6-position connector that connects under 

the left side cover and comes with the 12-position connector 

that connects into the tri-bar light in the rear fender fascia. 

• All NAMZ wiring harnesses are made in the USA 

Part#: 918439, Fitment: 14-23 Touring, Description: 

OEM 6-Position Molex with 12-Position Fender Fascia 

Connector, Unit: Each, Qty.: 1 

6.34 

Ready to Install Handlebar Wire Extension Kits 

by Namz Cycle Products 

All the Items needed to successfully extend the wiring to a set 

OEM handlebar switches. Harnesses include both male and 

female terminal crimped on each end. All kits include wire 

heat shrink and color matched wire. 08-17 Touring models with 

Electric throttle require an additional wire kit. Made in the USA 

For all 07-13 FLHT/FLHX/FLHR/FLTR Models (26 wire) 

664100 4-Inch kit 

664101 8-Inch kit 

664102 12-inch kit 

664103 15-inch kit 

For all 96-06 FLHT/FLHX/FLHR/FLTR Models (24 wire) 

664108 4-Inch kit 

664109 8-Inch kit 

664110 12-inch kit 

664111 15-inch kit 

For all 07-13 Models (except Touring Models and 11-up 

Softails and 12-up Dynas) (14-wires) 

664104 4-Inch kit 

664105 8-Inch kit 

664106 12-inch kit 

664107 15-inch kit 

For all 96-06 Models (except FLHT/FLHX/FLHR/FLTR Models) 

(12-wires) 

664112 4-Inch kit 

664113 8-Inch kit 

664114 12-inch kit 

664115 15-inch kit 

Additional Kits 

For all 08-14 Touring Models with ‘Throttle by Wire’ 

Electric Throttle 

664116 4-Inch kit 

664117 8-Inch kit 

664118 12-inch kit 

664119 15-inch kit 

Plug-n-Play 6 Position Molex to 10 Position Tri 

Bar Light Connector Rear Fender Harness 



• Complete with OEM 6-position connector that connects under 

the left side cover and comes with the 12-position connector 

that connects into the tri-bar light in the rear fender fascia. 

• All NAMZ wiring harnesses are made in the USA! 

Part#: 918438, Fitment: 10-13 FLHX, 10, 13 FLTRX, 13 

FLTRU, Description: OEM 6-Position Molex connector to 

12-Position Connector, Tri Bar Light in rear Fender Fascia, 


918435 918436 

Plug-n-Play Rear Fender Harness Adapter 

(Fender Fascia) 

Rear fender harness adapter, intended to adapt OE rear fender 

harness from 97-13 Road King, Electra Glide, 98-09 Road Glide 

and 06-09 Street Glide to a OE rear fender harness from a 10-20 

Road Glide or Street Glide. 100% plug-n-play. A must when using 

a late model fender fascia. 

Fitment: 97-13 Touring, except 10-13 FLHX, 10 FLHXSE, 10, 

13 FLTRX, 11 FLTRUSE, 11 FLHXSE2, 12 FLHXSE3, 12 FLTRXSE, 

13 FLTRU, 13 FLTRXSE2, 13 FLTRXSE2 ANV, Unit: Each, Qty.: 1 

PART# 

DESCRIPTION 

918435 When using 10-13 Fender Fascia Light 

918436 When using 14-20 Fender Fascia Light

APPAREL 

664132 

893357 

893364 

SEATS & 

TOURING 

FOOT 

CONTROLS 

893355 

893367 

HAND 

CONTROLS 

893356 

LIGHTING 

ELECTRICAL 

Hot Box Accessory Wiring 

Harnesses by Namz Cycle 

Products 

NHB-B01 

A replacement rear lighting harness for 

both taillight and rear turn signals with 

Namz ‘plug-n-play’ technology. Features 

two separate detachable harnesses for 

each saddlebag with RUN, TURN SIGNAL 

and BRAKE functions. This module is 

perfect for adding a custom taillight 

to your fender and turn signals to your 

saddlebags. 

664132 Fits all Big Twins from 96-13 

(except 11-13 Softails and 12-13 

Dynas) 

NHB-B02 

Features two separate detachable 

harnesses for each saddlebag with RUN, 

TURN SIGNAL and BRAKE functions. 

Designed to run with your stock rear 

lighting harness, just unplug your stock 

harness and plug the Namz unit in 

between and your done! This module is 

perfect for relocating your turn signals to 

your saddlebags or if you just want to add 

some custom lighting to your saddlebags. 



Dynas) 

664141 Fits 10-13 FLHX and FLTR models 

NHB-B03 

This unit utilizes a load equalizer and 

provides a detachable right & left turn 

signal harness for each saddlebag that 

will operate both standard incandescent 

or LED bulbs. Designed to run with your 

stock rear lighting harness, just unplug 

your stock harness and plug the Namz 

unit in between and your done! This 

module is perfect for adding custom 

lighting to your saddlebags while keeping 

your all your OEM lights. 



Dynas) 

664142 Fits 10-13 FLHX and FLTR models 

Power Port 

The perfect source for additional switched 

power. Remove the seat of your Touring 

and plug in this Y-Adaptor or charger port 

that will allow you to charge a phone, 

iPod or GPS. 

893355 For NON CAN-Bus models 

893356 For 14-20 Touring, 11-23 Softail, 

12-17 Dyna, 14-20 Trike, 14-20 

Sportster 

893357 With dust cover, for all CAN-Bus 

models 

893289 

893290 

893145 

Power Connectors 

Used for accessory power and come with 

terminals 


893290 1-Position female 04-13 Sportster, 

05-11 Dyna, 04-09 Softail, 04-13 

Touring, 09-13 Trike, 07-17 V-Rod 

(OEM 72260-04) 

893145 18-Position, on FX 12-17 models 

(OEM 72664-12) 

4-Way ATC Fuse Block 

Power-Up ONLY 

893366 

893368 

893369 

• A quick-disconnect harness to power-up 

a Tour-Pack 

• Plug in between rear fender harness 

and connect into your Tour-Pack 

• Connector is exposed behind the seat 

for easy removal 

893364 Touring 96-13 (except Street & 

Road Glides 10-13 and CVO or SE 

09-13) 

893366 09-17 CVO models 

Power-Up and Run-brake-turn Module 

• This EZ harness will give you running, 

brake & turn signal module inside your 

Tour-Pack 

• A few simple modifications to the Tour- 

Pack wiring and attach the harness with 

a few crimps. 

893367 Touring 96-13 (except Street & 

Road Glides 10-13 and CVO or SE 

09-13) 

893368 Street & Road Glides 10-13 ONLY 

893369 10-13 CVO Touring models 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.35

CAN/Bus Ignition Switch Converter Module 

CAN/Bus ignition switch converter module. Allows the use of any 

aftermarket Ignition or accessory switch on all Harley CAN/Bus 

models. (not for use on key-less models) 


Softail, 14-23 Touring, 14-23 Trike, Fitment Note: Except 

models, equipped with key-less go, Unit: Pack, Qty.: 10 

920501 920502 

6 

920503 920504 

920493 920494 920495 

920497 

920498 

920496 

920499 

OEM Replacement Throttle Position Sensor 

• These are designed to be a direct replacement for the throttle 

position sensor 


PART# FITMENT FITMENT NOTE OEM # 

920501 98-01 Touring Early Magneti- 27271-95 

Marelli Injection 

920502 07-20 Sportster, 

27629-01 

02-05 Touring, 

04-05 Dyna, 01-05 

Softail 

920503 02-17 V-Rod 27975-01 

920500 

OEM Replacement Speed Sensor 

• These are designed to be direct replacement for OEM speed 

sensors 



920493 95-05 Dyna, 94-96 FLHR 74420-94C 

920494 95-03 Sportster, 97-01 M2, 74402-95B 

97-98 S1, 97-99 S3, 99-01 

X1 

920495 96-99 Softail 74437-96B 

920504 06-07 Touring, 06- 

17 Dyna, except 

16-17 FXDLS, 06- 

15 Softail, except 

11 FLSTSE2, 12 

FLSTSE3, 13-14 

FXSBSE, 14-15 

FLSTNSE 

27659-06 

920496 00-03 Touring, 97-99 FLHR, 74429-97C 

98-99 FLHRCI 

920497 00-06 Softail, 04-06 Touring 74430-00D 

920498 02-04 V-Rod 74403-01C 

920499 04 Sportster 74402-04A 

920500 05-20 Sportster, 06-17 

Dyna, 07-23 Softail, 07-23 

Touring, 09-23 Trike, 05-17 

V-Rod 

74402-05 

OEM Replacement Intake Air Control (IAC) Unit 

• These are designed to be a direct replacement for the OEM 

part 

Part#: 920492, Fitment: 06-17 Dyna, except 16-17 FXDLS, 

06-15 Softail, except 11 FLSTSE2, 12 FLSTSE3, 13-14 

FXSBSE, 14-15 FLSTNSE, 06-07 Touring, OEM #: 27658-06, 


6.36

APPAREL 

920489 895428 

SEATS & 

TOURING 

920475 920476 

FOOT 

CONTROLS 

920477 

OEM Replacement Cam Sensor 

• These are designed to be a direct replacement part 



920475 99 Dyna, 99 Touring 32496-99 

920476 00 Dyna, 00-01 Touring 32793-00 

920477 00 Softail 32794-00 

920511 

OEM Replacement Oil Pressure Sensor 




920489 99-16 Touring, except 99-03, 07-10, 13, 16 74438-99A 

FLHR, 99-06 FLHRCI, 99-00, 03, 07-10 FLHT, 

00-02, 04-06 FLHRI, 02 FLHRSEI, 03-04, 06 

FLHTI, 04-06 FLHRSI, 07-16 FLHRC, 07 FLHRS, 

07 FLHRSE3, 07-10, 13 FLHTP, 08 FLHRSE4, 

13 FLHRSE5, 14 FLHRSE, 09-16 FLHTCUTG, 

13 FLHTCUTG ANV 

920509 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 26561-84 

88-93 FLHS, 94-98 FLHR, 98 FLHRCI 

920511 87-98 Touring, except 89-93 FLHS, 94-98 74406-87 

FLHR, 98 FLHRCI 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

923243 923244 

GASKETS 

920487 920488 

TRANNY & 

CLUTCH 

923245 

DRIVELINE 

OEM Replacement MAP Sensor 




920487 04-06 Sportster, 99-17 

Dyna, except 16-17 FXDLS, 

01-15 Softail, except 11 

FLSTSE2, 12 FLSTSE3, 13-14 

FXSBSE, 14-15 FLSTNSE, 99- 

07 Touring, 02-17 V-Rod 

920488 07-20 Sportster, 16-17 

Softail, 11 FLSTSE2, 12 

FLSTSE3, 13-14 FXSBSE, 14- 

15 FLSTNSE, 08-16 Touring, 

09-16 Trike, 16-17 FXDLS 

32316-99, 32416-10, 32417- 

10 

32319-07 

OEM-Replacement Twist Grip Sensor 

• These replacement twist grip sensors are an exact replica of 

the OEM replacement without the small green connector in 

the handlebar 

• 100% plug-n-play 

• Include the heated grip connector 



923243 08-13 Touring 32310-08 

923244 14-15 Touring 32310-08A 

923245 16-23 Touring, 16-23 Trike, 

16-17 Softail, 16-17 FXDLS 

32700050A 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.37

893307 

25004 

Starter Relays 

Starter relays used on most 

models 73-93. Fits FL and FX 

models 73-79, Sportster models 

74-79 and all models 80-85 using 

round plastic, terminal-style relay. 

25004 Replaces OEM 71463- 

73A 

893308 

Micro Starter Relay 

with Diode by Standard 

Motor Products 

A replacement for the Original 

Equipment micro-sized unit fitted 

to all Big Twins from 00-15. Sold 

each. 


00A 

24998 

Fits all models 80-93 using either 

a metal or plastic square bodied 

‘plug’ style relay. 

24998 Replaces OEM 31506- 

79B 

6 

Starter Relay 

• 30-Amp 

893308 Socket & terminal kit 

(OEM 9937, 72046- 

79) 

893307 Heavy Duty (OEM 

31504-91A) 

17050 

17152 

17518 

Starter and Brake 

Light Relay with 

Diode 

This is an Original Equipment 

part. Fits the starters on all 

models from late 93-10, and 

the brake light circuit on 

Touring models from 91-10. 


91A 

Standard Micro 

System Relay 

A replacement for the original 

equipment micro sized unit 

fitted for all big twins from 

00-15 


01A 

Starter Relay 

This starter relay replaces OEM 

31506-79 and fits most Big 

Twin and Sportster models 

from 80-99. Sold each. 

688590 Starter relay 80-99 

models (repl. OEM 

31506-79) 

Late Model XL Starter 

Relay by Blue Streak 

Replacement starter relay for 

late model Sportsters. Sold 

each. 

668347 05-09 XL starter relay 

Daytona Twin Tec 

Ignition Power Relay 

Kit 

This relay kit improves or 

eliminates the voltage drop on 

big inch or high compression 

motors with single fire 

ignitions. 

684962 Power relay kit 

17060 17059 

17293 

17294 

Standard Motor Products 

Top-quality electrical parts for a wide variety of Harley-Davidson 

applications from the manufacturer of Blue Streak Performance 

Products. Sold each. 

Starter RelaysFits all 04-15 

models 


04, 31586-07 04-13 

Sportster, 04-23 


Fits all 80-99 models using a metal 

or plastic square bodied ‘plug’ 

style relay. 

17060 Replaces OEM 31506- 

79B 

Same as CC #17060 but with an 

improved ‘weather-proof’ skirt to 

protect the connector block. 

17059 Replaces OEM 31506- 

79B 

Fits FL and FX models 73-79, 

Sportster models 74-79 and all 

models from 80-03 using a round 

plastic, terminal-style relay. 


73A 

Micro Starter Relay with 

Diode 

A replacement for the Original 

Equipment micro-sized unit fitted 

to all Big Twins from 00-15. 


00A 

Starter/Brake Light Relay 

with Diode 

Works with starters on all models 

from 93-10, and the brake light 

circuit on Touring models from 

91-10. 


91A 

Starter Relay Connectors with 

Pigtail Harness 

Connectors for use with CC #’s 

17059 and 17060. Also fits CC 

#’s 17518 and 75218 relays if 

orange wire is not used. 

17293 Five lug 

17294 Four lug 

Circuit Breakers 

895443 

17064 15 amp (repl OEM 

74587-94) 

17063 15 amp (repl. OEM 

74589-73) 

17062 30 amp (repl OEM 

74599-77B) 

617526 40 amp (repl OEM 

74600-97A) 

17061 50 amp (repl. OEM 

74600-94) 

19295 Circuit breaker clips/ 

rivets. Pack of 10. 

Starter Relay Custom 

895443 High/Lowbeam control 

for one wire button 

switch 17060 

6.38

17715 

26447 

APPAREL 

17716 

26440 

SEATS & 

TOURING 

895446 

FOOT 

CONTROLS 

Starter Relay Cover 

A chrome relay cover complete 

with mounting spacers and 

screws that fits all 4-speed FL 

models from 65-84. 


68T 

Goodridge Brake 

Light Switch 

Hydraulic switch features wire 

leads for your stoplight. Fits 

most Big Twin and Sportster 

models. Ideal for many 

applications (7/8" hex with 

1/8" NPT thread) 

27052 Goodridge brake 

light switch 

25505 25506 

Accel Hydraulic Brake 

Switches 

Top-quality Accel rear brake 

light switches for most models. 

They feature heavy-duty 

contacts and brass terminals. 

Fits ServiCar from 51-73 and 

58-70 FL models. 


51A 

Fits Big Twin models from 

71-up (except 08-Up Dyna 

models), and Sportster models 

from 79-03. 

25506 Replaces OEM 72023- 

51A 

Hydraulic Brake 

Switches 

Top-quality hydraulic rear 

brake light switches for most 

models. Heavy-duty contacts 

and quality brass terminals. 

17716 79-20 Sportster, 

68-84 FL Shovel, 

71-84 FX Shovel, 

85-94 FX Model, 

84-23 Softail, 85-23 

Touring, 02-17 

V-Rod, 91-07 Dyna, 

21-23 Sportster 

RH, except 22-23 

Nightster RH975, 

23 Nightster Special 

RH975S, 21-23 Pan 

America (repl. 72023- 

51A) 

Fits ServiCar from 51-73 and 

58-70 FL models. 

17715 Replaces OEM 

72002-51AFits FL 

and FX models 73-79, 

Sportster models 74-79 

and all models from 

80-03 using a round 

plastic, terminal-style 

relay. 

895446 79-20 Sportster, 




84-23 Softail, 85-23 

Touring, 02-17 

V-Rod, 91-07 Dyna, 


RH, except 22-23 

Nightster RH975, 

23 Nightster Special 

RH975S, 21-23 Pan 

America Replaces 

OEM 72023-51D 

Brake Light Switch 

Banjo Bolt by 

Goodridge 

Banjo bolt with pressure 

switch built into it. Simplifies 

the rear brake by eliminating 

the tee and pressure switch 

and creating a single brake 

line system. Sold Each. 

14137 3/8"-24 

14138 7/16"-24 

26448 

12287 

26429 

26435 

Chrome Replacement 

Stop Light Switches 

Stamped steel construction 

and heavy-gauge support 

plates. Ideal for replacing 

worn stock parts during a 

restoration project or when 

building a ground-up full 

custom. 

26447 Fits FX, FXE and FXS 

models 73-77 (repl. 

OEM 72005-73A) 

push-off style 

26448 Fits Sportster models 


72004-75) pull-on 

style 

26435 Fits Big Twin models 

37-57, 45" WL 

models 37-57 and 

Servicars 37-50 (repl. 

OEM 72003-34T) 

pull-on style 



72004-70T) push-off 

style 

26429 Fits Sportster and K 

models 52-66 (repl. 

OEM 72004-52) pushoff 

style 

Universal Stop Light 

Switch 

Sold on a display card of 10, or 

individually. 


12288 Card of 10 

Rear Brake Switch 

Harness 

Stainless braided rear brake 

switch harness. 

893425 Rear brake Harness 

Twin Cam Oil Pressure 

Switch 

Oil pressure switch for all Twin 

Cam models and V-rod models 

688635 Oil pressure switch 

(repl. OEM 26561-99) 

Oil Pressure Switch 

Quality replacement oil 

pressure switch for XL and K 

models 54-76 and Big Twin 

(except Evo) 41-84. Replaces 

OEM 26552-72, sold each. 

688594 Oil pressure switch 

(repl. OEM 26552-72) 

Replacement 

Hydraulic Stoplight 

Switch 

Part#: 922741, Fitment: 

79-20 Sportster, 68-84 FL 

Shovel, 71-84 FX Shovel, 

85-94 FX Model, 84-23 


02-17 V-Rod, 91-07 Dyna, 

21-23 Sportster RH, except 

22-23 Nightster RH975, 23 

Nightster Special RH975S, 

21-23 Pan America, OEM 

#: 72023-51E, Unit: Each, 

Qty.: 1 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.39

668346 

895426 

25536 17902 

17901 

84899 

895427 895428 

658444 

658445 

895425 

6 

Oil Pressure Switch 

895426 For FX/FXE/FXS1200/FXEF80/FXS80/FXB80/FXWG80 71-84, 

FLT/FLHT 80-83, FL 80-92, FXR 82-83 (repl. OEM 26552- 

72) 

895427 For 77-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 

X1, 03-10 XB (repl. OEM 26554-77,-77D) 

895428 For FLH/FLT/FXR 84-85, FX 84-86, Softail 84-99, FXR 86-92, 

Dyna 91-99 (repl. OEM 26561-84) 

668346 For Twin Cam and V-Rod 

25464 25463 

25460 

Accel Oil Pressure Switches 

American-made units with heavy-duty contacts, brass ferrule, 

thermoplastic insulator and a bright finish. 

Fits Sportster and K models from 54-76 and Big Twins from 41-84 

(except Evolution models). 

25460 Replaces OEM 26552-72 

Fits 77-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 03-10 

XB 

25463 Replaces OEM 26554-77 

Fits Evolution Big Twin models from 84-99 (except models with 

electric oil pressure gauge) 

25464 Replaces OEM 26561-84 

Transmission Neutral Switches 

25536 Fits 4-speed FL models from 59-64 and FX models with 

ratchet top from late 73-early 79 as well as Evolution 

Big Twin 87-97 and Sportster models 86-98 (repl. OEM 

33900-59C) 

17902 Fits 4-speed FL models with ratchet top from 65-E78 

(repl. OEM 71507-65) 

17901 Fits 4-speed FX models with ratchet top from 71-E73 

(repl. OEM 71507-71) 

84899 Fits 4-speed Big Twin models with ‘pancake’ top from 

79-86 (repl. OEM 33901-79) 

658444 Fits 5-speed Twin Cam Softail models from 00-06 and 

Dyna Glide models from 01-05 and Touring models 01-06 

(repl OEM 33904-00) 

658445 Fits Softail models from 98-99 and Touring and Dyna 

Glide models from 99-00 (repl. OEM 33902-98) 

895425 Fits FL 59-64, FX/FL 73-79, FXST 86, XL 86-98, FLT/FXR/ 

FXST/FLST 87-97 

Related Parts 

75520 Connector for neutral light switch (repl. OEM 9905). 

Pack of 10. 

Replacement Transmission Neutral Switch 


PART# FITMENT COLOR DESCRIPTION OEM # 

922740 99-20 Sportster Silver One Pin 33900-99 

922742 01-05 Dyna, 00- 

06 Softail, 01-06 

Touring 

Black Two Pin 33904-00 

6.40 

Chrome Oil Pressure Sender Cover Kit by 

Kuryakyn 

This rubber-lined, easily-installed, die-cast cover kit fits all 

Evolution Big Twins from 84-99 (except models equipped with 

2-terminal sending units). 


Universal Switch Plates 

Sold on a card of 12. 

15103 Key switch bracket 

12943 Single mount hole 

15103 

12943 

Marine-Grade Key-Start Ignition Switch 

Marine-Grade, Key-Start Ignition Switch with polished stainless 

and knurled jam-nut. Complete with 2 keys and brass screws. 

Includes optional momentary switch when you push in the key 

while key is on! 

• High impact recoil key start switch 

• Includes: 

• Brass screws 

• Polished stainless-steel and knurled panel nut 

• 2 keys 

Part#: 925143, Unit: Kit, Qty.: 1

APPAREL 

12251 12286 

SEATS & 

TOURING 

Chrome Ignition Switches 

Fits Sportster models 75-77 and FX models 

73-77. 

12251 Ignition switch (repl. OEM 70124- 

75) 

Fits FX models from 78-85, Sportster 

models from 78-93 and FXR 


Universal Ignition Switch 

• 3 Position 

• Mounting Stem Diameter 5/8” and 

length 7/16” 

• 12V 5/10 AMP 

895420 Universal ignition switch 

Ignition Switch 

Direct replacement for Dyna 93-02, FLHR 

94-02 and Softail 96-02 (repl. OEM 71313- 

96, 71501-93) 

895421 Ignition switch 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 


77T) 

ELECTRICAL 

Three-Way Universal Ignition 

Switch 

12289 Popular as an OEM replacement 

Mini Ignition Switch 

Two position mini ignition switch for 

custom applications. Includes two keys. 

Sold each. 

688193 Mini ignition switch 

Custom Ignition Switch 

Made of durable plastic which makes it 

waterproof. Features off, run and spring 

return start with push button feature. Can 

be used without a starter relay. Made in 

USA. 

12203 Ignition switch, water resistant, 

flat switch style with spring-return 

start, 12-volts 

Oil Sending Harness 

Slide over the 18-gauge wire. 

893424 For all EVO engines 

Heavy-Duty Ignition Switch 

A top-quality, heavy-duty ignition switch 

for all Softail, FXWG and FL models from 

73-95 (except Dyna Wide Glide models). 

Also compatible with all of our custom six 

post switch dash covers. 


73T) 

Heavy-Duty Electronic Ignition 

Switch 

Totally electronic switching eliminates 

the troublesome pole-to-bar contacts of 

Original Equipment switches. The 6-pole 

terminal pattern is highly-resistant to 

vibration and corrosion. Includes two 

reversible keys and both the early and 

late-style ignition switch caps. 

26455 Fits all models from 36-95 (except 

Dyna Wide Glide models) 

Convertible Ignition Switch 

5-post ignition switch and lock assembly 

complete with both styles of caps. 


36TA) 

Replacement Ignition Switch Cap 

Late die-cast style. Includes pins. Pack of 10. 

25538 Switch cap 


Late Style Ignition Switch 

Assemblies 

Switch assemblies feature round tumbler 

style keys for added security and simple 

hook-ups. 

Fits Sportster models from 75-03, FXR 

models from 82-99, Dyna Glide models 

(except FXDWG) from 91-03, and FX 

models from 73-03 (except FXWG and 

FXST) as well as custom applications. 

49211 OEM-style barrel key ignition 

switch, replaces OEM 71428-90B 

Replacement for Dyna Glide models 

(except FXDWG) from 91-93 as well as 

many custom applications. 

49212 Replaces OEM 71421-90 

Side Hinge Ignition Switch 

Chrome side hinge ignition switch with 

barrel style key. Fits FXDWG 93-11; Softail 

models 96-10; and Road King models 94- 

13. Includes two keys. 

17717 Replaces OEMs 71501-93 and 

71313-96 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.41

Drive 

Universal 1" Handlebar 

Combination Switch 

High-lo beam switch with kill or horn 

button. 

25991 Chrome 

Grill 

Ignition Parts 

Direct replacement for stock parts 

59725 Ignition rotor for many models 

from 83-02 (except models with 

fuel injection) replaces OEM 

32402-83 

59726 Ignition rotor screw and washer 

replaces OEM 2611B. Pack of 10. 

6 

Scallop 

Handlebar Light Switch 

Mounts to any 1" handlebar. Duplicates 

original-style, inside handlebar-wired 

switch perfectly. 

25534 Replaces OEM 71840-29T 

Handlebar Button Switch 

Mounts to any 1" handlebar. Two-wire 

style, and designed to run wires through 

the handlebar for horn or starter. 

25533 Replaces OEM 71800-26TA 

PM FL Ignition Switch Cover 

Assembly 

For FL models 07-13 

607468 Grill, chrome 

For 14-23 Touring, 14-23 FLHTCUTG, 18 

FLHTCUTG ANV 

607473 Drive, contrast cut 

607474 Drive, chrome 

607475 Grill, contrast cut 

607476 Grill, chrome 

607478 Scallop, chrome 

Standard Motor Products 

Ignition Sensors 

Anyone who has ever told you that the 

stock electronic ignition either works or 

it doesn’t, is WRONG! Thousands of dyno 

runs have proven to us that your stock 

sensor can be operating at less than 100% 

efficiency without you ever knowing it. 

609994 For Touring models from 80-93, 

Softail models from 84-85, FXR 

and Sportster models from 80-94 

(repl. OEM 32400-80A) 

609995 For Dyna Glide models from 

91-95 (repl. OEM 32404-90) 

609996 For Touring models from 94-95, 

Sportster models from 95-97 

and XL 1200S models from 98-03 

(repl. OEM 32400-94) 

Accel Single/Dual Fire Ignition 

This ignition unit works with both single 

or dual fire coils, eliminating the need to 

buy a new ignition when you change coils. 

Hours of dyno testing went into creating 

this ignition so that it is simple to use and 

delivers the premium performance you 

expect from Accel. It has 14 preset ignition 

curves to cover a stock engine through 

exhaust and intake changes to a full 

blown big inch, high compression motor. 

Other features include an easily selectable 

rev limiter and LED. timing light for quick 

static timing. The harness has a V.O.E.S. 

input, tachometer output and is externally 

grounded for better reliability, and the 

housing is machined out of aluminum for 

better heat dissipation. 

668013 Fits Big Twins from 71-99 (except 

Twin Cam 88 models) and 


6.42

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Compu-Fire Ignition System 

for High Compression Motors 

Eliminate pinging and misfire in high 

compression and large displacement 

engines. Advance curves range from fairly 

steep for near stock to more gradual for 

high-horsepower engines. All ignition 

circuits are contained in the nose cone and 

there is an ‘Accu-Ray’ static timing LED. 

Single or dual fire operation is switchselected, 

and dual sensor circuits eliminate 

hard starts and give accurate spark timing 

even at high RPM. Eight advance curves, 

adjustable rev-limiter (6,000 to 7,500 rpm) 

and two VOES modes. 

17178 Fits all carbureted Big Twins 

from 70-99 (except Twin Cam 

models) and Sportster models 

71-03 

Compu-Fire ‘Elite 1’ Digital 

Electronic Ignitions 

All circuits are contained on the timing 

plate. There’s no module or anything 

else to mount! The HDE-1 and HDE-2 

have fixed advance curves and 6500 RPM 

rev-limiters to protect the engine. Model 

HDE-3 has eight advance curves and an 

eight-stage rev-limiter adjustable from 

6000 to 7500 RPM or off. All models 

have the Accu-Ray timing LED for precise 

timing and system check. They work with 

the factory VOES switch (HDE-3 offers 

dual-range operation). Fit all carbureted 

Big Twins from 70-99 (except Twin Cam 

models) and Sportster models from 71-03. 

17174 HDE-1 dual fire. Will not work on 

kicker models. 

17175 HDE-2 single fire 

17176 HDE-3 single or dual fire 

Compu-Fire Electronic 

Ignitions 

These digital ignitions use advanced 

Hall-Cell triggering and surface mount 

technology with a convenient builtin 

‘Accu-Ray’ static timing LED. They 

completely eliminate the rev-limiter and 

have built-in adapters to correct the 

tachometer output. Fit non-EFI Evolution 

Big Twin models from 70-00 and Sportster 


17170 Dual-Fire ignition system for single 

plug cylinder heads 

17171 Single-Fire ignition system for 

single plug cylinder heads 

Note: 80-10 models fitted with Original Equipment electronic 

ignition systems will require the additional purchase of a 

mechanical advance unit. 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

031003 

TRANNY & 

CLUTCH 

VT-I Electronic Ignition System 

by Daytona Twin Tec 

Dual fire electronic ignition. Designed for 

all Harley V-Twins except early magneto 

style and 99 and later Twin Cam models. 

Includes trigger rotor for use with 

mechanical points. Built in adjustable RPM 

limiter (5200-7000 RPM). Status LED for 

easy static timing. Electronic dwell control 

for maximum ignition energy at high RPM 

and reduced current draw at low RPM. 

Easy installation, simple two wire hookup. 

672536 VT-I Ignition 

Mallory Unilite Breakerless 

Ignition 

Permits an easy conversion from point 

ignition to the self contained Unilite 

module which has no moving parts to 

wear out. Using Mallory's time tested 

breakerless ignition circuit, combined 

with modern surface mount Thermal 

Clad construction, the Mallory Unilite can 

drive any ignition coil or combination of 

coils with a total primary resistance of at 

least 2.0 Ohms. We recommend ignition 

coils with 2.0 to 3.0 Ohms for racing 

applications and 3.0 to 4.0 Ohms for street 

use. Conversion is an easy three-wire 

connection. 

26915 Complete kit for 70-99 Big Twins 

with point ignitions (except Twin 

Cam) 


Daytona Twin Tec Fully 

Programmable Ignition 

Systems 

These ignitions are an upgrade from 

the non-adjustable stock OEM unit, and 

feature advanced electronics set into a 

machined billet aluminum housing. Rotary 

switches are used to set the operating 

modes (such as single or dual fire), adjust 

the timing advance, and select the RPM 

limit. Two diagnostic LEDs indicate the 

status and the state of the vacuum switch 

(VOES). The status LED is also used to 

indicate top dead center (TDC) for easy 

timing set-up. A special feature allows 

use of the tachometer wire for a link to a 

laptop PC. Windows compatible software 

is freely available for download at the 

company website. For kickstart enthusiasts 

we have also included a kickstart mode. 

031003 Fits most models from 70-99 

(except Sportster models from 

98-10 and Twin Cam 88 engines) 

using stock electronic ignition 

trigger rotor (not included) 

672492 Internal Ignition 1500S for all 

98-02 Sportster (except 1200S) 

Not legal for sale or use on pollution 

controlled vehicles. 

Note: Sportster models from 71-82 and Big Twins from 70-83 

require that mechanical advance units and point ignitions, or 

early electronic ignitions and rotors be replaced by an OEM 

32402-83 ignition timing rotor (CC #59725). 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.43

6 Dyna ‘S’ Ignition Systems 

Systems use magnetic rotors with Original 

Equipment spark advance mechanisms 

to retain the factory advance curves 

and replace points and condensers with 

a high-performance dual or single-fire 

system. Dyna ‘S’ ignitions change timing 

less than 3° from 0-8,000 RPM and feature 

improved performance, easy installation 

and a 3-year factory warranty. Dyna 

recommends using 5.0 ohm coils on Dynas’ 

dual and single fire ignitions. Completely 

self-contained, and install behind points 

cover. Big Twins -99, XL -03. 

Note: For proper results, matching high-performance coils 

must be installed in conjunction with the CC #’s 12302 and 

12369 single fire kits. 

Complete Ignition Kits with Dyna 

Coils 

Complete solution with Dyna S ignitions, 

Dyna high-performance coils, wiring and 

detailed instructions. 

12097 Dyna ‘S’ single fire kit 

12098 Dyna ‘S’ dual fire kit 

Kits without Advance Unit Assembly 

Fit Sportster models from 71-79 and Big 

Twins from 70-79 using OEM advance unit. 

12319 High-performance dual fire 

system (MFG #DS6-1) 

12302 Single-fire ignition system (MFG 

#DS6-2) 

Daytona Twin Tec Nose Cone 

Ignition Kit 

Replaces the Original Equipment ignition 

system, and mounts in the gear case 

cover using the standard H-D timing rotor 

(not included). Ignition offers adjustable 

advance, adjustable RPM limit settings in 

100 RPM increments, and switch selectable 

single or dual fire modes. Single fire mode 

improves starting, reduces the occurrence 

of backfiring at low RPM, and improves 

power at high RPM. Red LED flashes when 

the engine reaches top dead center (TDC) 

permitting easy static timing. The status 

LED also provides diagnostic information. 

A green VOES LED illuminates when 

the VOES (vacuum switch) input is 

active. A special feature allows use of 

the tachometer wire for an RS-232 link 

to a laptop computer when the engine 

is not running. Individual units can be 

programmed with a custom advance curve 

and other engine parameters such as rear 

cylinder timing offset. The use of the 

tachometer wire for the PC link eliminates 

the need to remove the outer cover plate. 

Kit includes Single Fire ignition coil, 8.5 

mm universal plug wire set, and a nose 

cone ignition. 

672528 Fits all Big Twin models from 

70-99 and Sportster models from 

71-97 insert 

‘Stand-Alone’ Ignition System 

for Twin Cam Models by 

Thunder Heart Performance 

This innovative ignition is designed for 

use in custom bike applications were a 

twin cam motor and crank sensor is going 

to be used. It consolidates all ignition 

components into a small easy-to-mount 

package. Wiring the ignition system is 

a snap, because it includes components 

needed to hook up the ignition to custom 

bike application. No factory ignition 

harness required. Includes 'Smart Link' 

software that allows the user to fully 

program the front and rear spark timing 

and rev limit with a lap top computer. 

• Simplifies the installation of a Twin Cam 

motor into a custom bike 

• Complete ignition system: Ignition 

module, Ignition coil 

• Consolidates all ignition functions in a 

compact, easy-to-mount package 

• Integrated high-output single fire 

operation 

• Real-time diagnostic features aid in 

trouble-shooting and tuning 

• Utilizes the factory crank trigger for 

improved starting and performance 

• Billet aluminum housing is weather and 

vibration-proof 

• Includes comprehensive instructions for 

installation 

• Custom mounting using 1/4"-20 bolts at 

2" center-to-center hole spacing 

• Fits custom bikes using Twin Cam 

engines and Evolution engines with 

crank sensors 


6.44

APPAREL 

630101 

SEATS & 

TOURING 

640281 

FOOT 

CONTROLS 

630102 

HAND 

CONTROLS 

031005 

LIGHTING 

630103 

Dynatek 2000iP Programmable Ignition Systems 

Dynatek has upgraded their popular 2000i ignitions to be fully programmable when used with the 

optional programming kit. 

• Completely self-contained under the cam cover for a clean look 

• Heavy-duty billet aluminum construction for long life 

• Single fire operation down to zero rpm for easier cranking and kicking 

• Operates all combinations of single fire or dual fire with single plug or dual plug heads (when 

used with appropriate coils) 

• Eight advance curves to cover a broad range of engine configurations and riding styles 

• Engine over-rev protection adjustable from 6.000 to 7.500 rpm 

• Adjustable timing retard for nitrous and turbo applications 

• VOES indicator tells you at a glance, the status of the VOES switch 

• Built-in tach driver can be used to activate shift lights and auto-shifters 

• Easy static timing with built-in timing indicator 

• Intelligent over-current/short-circuit protection, active dwell control and over-voltage protected 

• Fits Sportster models from 70-03 and all Big Twin models from 70-99 (except Twin Cam 88 

models) 

630108 Dyna 2000i module ONLY 

630101 Complete kit for single plug/single fire applications (includes one DC6-5 'Twin Fire II' 3 Ohm 

coil) 

630102 Complete kit for single plug/single fire applications (includes two DC3-1 single tower 3 Ohm 

coils) 

630103 Complete kit for dual plug/single fire applications (includes two Dyna DC1-1 dual tower 3 

Ohm coils) 

Optional Programming Kit for Dynatek 2000iP Ignitions 

Adds full PC programmability and data recording to Dynatek 2000iP ignitions. 

• 8 point fully definable wide open throttle curve, 8 point fully definable part throttle curve 

• Rev limit programmable in 50 RPM steps 

• Programmable dead cranking revs 0-5, Programmable rear cylinder offset, total of +/- 10° 

• Programmable rev limiter 

• Maximum RPM and Seconds near rev limit 

• Total engine hours/time at wide open throttle 

• Number of engine starts (two minutes running counts as one) 

• Longest time operating at wide open throttle 

630100 Programming kit 



Programmable 

Ignition Modules 

Special features: 

• More power with dyno 

tuning – optimized built-in 

advance curves and easy 

programming of custom 

curves 

• Full support of the new 

J1850 data bus used for 

communications with 

instrument cluster and turn 

signal/security module (TSM/ 

TSSM) 

• Compatible with 

H-D scan tools, also 

allows recalibration of 

speedometer/odometer to 

accommodate tire and gear 

changes 

• Built-in data logging for 

last 30 minutes of engine 

operation (engine builders 

will find this highly useful 

for tuning, diagnosing 

problems, and reducing 

unjustified warranty claims) 

• Free demo software 

available for download on 

Daytona Twin Tec web site 

and custom advance curves 

(must use USB interface 

cable) 

• Fits carbureted Twin Cam 88 

and Sportster models with 

12-pin connector from 04-06 

640281 Programmable module 

ONLY (T/C 04-06, 

XL with 12 pin) 

031005 Fits carbureted Twin 

Cam 88 models from 

99-03 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.45

6 

630107 

890545 

Mallory Unilite Distributor 

For faster, easier starting, Mallory’s 12- 

volt electronic ignition system delivers 

performance and reliability at an 

affordable price. The billet aluminum 

distributor utilizes the Unilite ignition 

module, and a heavy-duty fully adjustable 

mechanical advance unit. Includes 

detailed instructions and wiring harness. 

26916 Fits Big Twins from 36-69 

Note: When using stock heads, no head removal is required 

895422 

895423 

890546 Mallory All Electronic Ignition 

Distributor 

All the features and benefits of an 

Dynatek 2000 for Carbureted 

electronic Hall Effect ignition packaged in 

Twin Cam & Sportster models a distributor for early model Big Twins and 

• Single Fire ignition 

for the old school customs. With electronic 

• Fully programmed 

advance, rev limiting, and choice of Single 

• Stock OEM mounting 

or Dual Fire for 12-volt systems. Detailed 

• Stock OEM connectors 

instructions included. Installs without 

• Reverse battery and Spike protection removing the cylinder heads. 

built-in 

630107 Twin Cam carbureted 99-03 

668030 Fits Big Twins from 36-69 

890545 Twin Cam carbureted 04-06 

890546 Sportster 04-06 

895424 

Points & Condenser Kit 

895422 Sportster And K Models Except 

Magneto 54-70 and Big Twins 

48-69 

895423 900 CC XLHC With Magneto 

58-69 

895424 Sportster 71- Early 78 and Big 

Twins 70-Early 78 

Chrome Ignition Module 

Cover 

Chromed steel cover replaces the 

standard black metal cover on Sportster 



Ignition Module Bolt Kit 

Secure the ignition module cover on 

Sportster models. Three-piece chromeplated 

countersunk sockethead screw kit. 

32049 Fits models from 98-03 

Roller Bearing Advance Kit 

Smooth advance for ignition timing has 

reached a new level of performance and 

reliability with our roller bearing advance 

kit. Roller bearings at the pivots of the 

advance weights gives the proper amount 

of ignition advance at the right time every 

time. Included are all the parts to make 

the ignition up-to-date with better-thannew 

performance. Includes the roller 

bearing weights installed on a quality 

advance unit shaft and plate, circuit 

breaker base plate, points cam, wiring 

harness, springs and timing screw. Fits 70- 

E78 Big Twins or 71-E78 Sportster models 

as well as many models from late 78-03 

when converting to point-style ignitions. 


Static Timer 

This static-timing device permits you to 

lock your advance position while you 

static-time it. Helps reduce kickback while 

promoting easier starts and smoother 

running. 

20134 Fits all models with point-type 

ignitions from 70-78 

6.46

APPAREL 

SEATS & 

TOURING 

25447 

17191 

Blue Streak High- 

Performance Points 

and Condenser 

These Blue Streak lubripoints 

feature heavy-duty 

construction, lubriwick, 

oversize ventilated contacts 

and copper shunt. Available in 

a kit or individually. 

Point and Condenser Set 


from 71-E78 and 

all Big Twins from 

70-E78 (repl. OEMs 

32661-70, 32726-30, 

30801-47) 

Points Only 


from 71-E78 and Big 

Twins from 70-E78 

(repl. OEM 32661-70) 

Condenser Only 

17192 Fits all Sportster and 

K models (except 

magneto) from 

54-E78 and Big Twins 

from 30-E78 (repl. 

OEMs 32726-30A, 

30801-47) 

25446 

25492 

Accel Tune-Up Kits/ 

Components 

The tune-up kits include 

matched point sets with a 

compact mylar-insulated 

condenser and a packet of 

point cam lube. Sold each. 

Fits Sportster Models from 

71-E78 and Big Twins from 

70-E78 

High-performance point set 

has a heavy-duty 32-oz. spring 

to resist ‘point bounce’ at high 

RPMs. 

25490 Tune-up kit 

25446 High-performance 

point set 

Fits Sportster and K Models 

(except Magneto) from 54- 

70 and Big Twins from 48-69 


25447 Condenser (repl. 

OEMs 32726-30A, 

30801-47) 

Fits 58-69 Sportster Models 

with Magneto 


Motor Factory Circuit 

Breaker Cam 

12322 Circuit breaker cam 

(repl. OEM 32542- 

70TA) 

Chrome Antique-Style 

Coil Covers 

Designed after the popular 

covers used in the mid-1940s. 

The two openings in the front 

permit easy access to the plug 

wires, and the inside of the 

covers features a heavy-duty 

mounting bracket. 

15206 Fits all Softail models 

84-99 

Note: These coil covers may not be used 

in conjunction with CC #’s 25410 or 

25411 due to interference problems. 

Coil Cover for Twin 

Cam Models 

Billet Aluminum coil cover 

for Twin Cam models. Black 

powder coated. Sold each 

681424 Black coil cover for 

crane single fire coil 

Chrome Coil Cover for 

Sportster Models 

Show-chrome two-piece coil 

cover. Beautifully constructed 

from stamped steel for 

a perfect fit on Original 

Equipment or aftermarket 

coils from 71-81. 


83T 

26378 688075 

Chrome or Black Coil 

Covers 

A variety of styles to add the 

perfect custom touch to your 

machine. Fit 4-speed Big Twin 

and Softail models from 65-99. 

26378 Louvered chrome 

coil cover (repl. OEM 

31610-83T) 

688076 Louvered black coil 

cover (repl. OEM 

31610-83T) 

15210 Plain chrome coil 

cover (repl. OEM 

31606-65TA) not 

shown 

688075 Plain black coil cover 

(repl. OEM 31606- 

65TA) 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Ignition Wiring Cover 

This kit has everything you 

need to braid the wire coming 

our of the cam cover. 

SHEETMETAL 

893426 For all EVO ignition 

harnesses 

Coil Cover for FXR 

Models 

A beautiful chrome-plated coil 

cover for all FXR models from 

82-94. 


82T 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.47

990109 917670 917670 607805 

6 

607803 607800 917669 917669 

890392 607804 890706 890393 

890394 607806 607809 607817 

607801 607802 607807 607810 

607818 607808 607815 890391 

6.48

APPAREL 

MotorFactory Ignition Coils 

• High quality replacement coils 

• OEM replacement coils for Indian and H-D models 


FITMENT FITMENT NOTE COLOR OEM # OPERATION 

TYPE 

ELECTRICAL 

RESISTANCE 

PART# 

01-06 Softail, 02-06 Touring, 01-06 Dyna EFI Models Black 31743-01 Single Fire 0,5 607803 

02-17 V-Rod EFI Models Black 32477-01A Single Fire 3 890393 

07-17 Dyna, 07-16 Touring, 07-17 Softail, 09-16 EFI Models Black 31696-07 Single Fire 0,5 607805 

Trike 

07-20 Sportster EFI Models Black 31656-07 Single Fire 0,5 607804 

08 FXCW, 08-10 FXCWC EFI Models Black 31684-08 Single Fire 0,4 890394 

11 FXCWC, 11-12 FXS, 14-16 FXSB, 13-14 EFI Models Black 31684-11 Dual Fire 3 890395 

FXSBSE, 13 FXS 103 

15-23 Indian Bagger, except 22 Challenger EFI Models Black Dual Fire 0,9 990109 

Dark Horse, 22 Challenger Limited, 23 

Challenger, 23 Challenger Dark Horse, 23 

Challenger Limited, 23 Challenger Elite, 

12-23 Indian Cruiser, 15-23 Indian Touring, 

except 22-23 Pursuit Dark Horse, 22-23 Pursuit 

Limited, 23 Pursuit Elite 

17-23 Touring, 17-23 Trike EFI Models Black 31600017 Dual Fire 5 917669 

18-23 Softail EFI Models Black 31600067 Dual Fire 3 917670 

65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, 


65 Panhead, 66-79 FL Shovel, 71-79 FX Shovel, 


71-03 Sportster, 70-84 FL Shovel, 71-84 FX 

Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 

Softail, 85-98 Touring 

71-03 Sportster, 70-84 FL Shovel, 71-84 FX 

Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 


80-84 FL Shovel, 80-84 FX Shovel, 80-82 

Sportster, 84 Softail 

80-84 FL Shovel, 80-84 FX Shovel, 80-82 

Sportster, 84 Softail 

85-99 Sportster, 91-98 Dyna, 85-99 Softail, 85- 

98 Touring 

85-99 Sportster, 91-98 Dyna, 85-99 Softail, 85- 

98 Touring 

95-97 FLHTCU, 95-98 FLHTC, 95-98 FLHR, 96-98 

FLHT, 96 FLHTUI, 96-97 FLHRI, 97-98 FLHTCUI, 

98 FLHRCI 

Carburator 

Models, 

with Points 

Condensor 

Ignition 

Carburator 

Models, 

with Points 

Condensor 

Ignition 

Carburator 

Models 

Carburator 

Models 

Carburator 

Models, with 

Elektronic 

Ignition 

Carburator 

Models, with 

Elektronic 

Ignition 

Carburator 

Models 

Carburator 

Models 

Magneti-Marelli 

Fuel Injected 

98-03 XL1200S Carburator 

Models 

99-01 Touring Carburator 

Models 

99-06 Dyna, 00-06 Softail, 04-06 Sportster, 02- 

06 Touring 

Carburator 

Models 

Black 31609-65A Dual Fire 5 607806 

(Compact 

Case),607809 

(Molded 

Case),607813 

Chrome 31609-65A Dual Fire 5 607817 

Black Single Fire 3 607801 

Chrome Single Fire 3 607802 

Black 31609-80 Dual Fire 4 607807 

(Compact 

Case),607810 

(Molded 

Case),607814 

Chrome 31609-80 Dual Fire 4 607818 


(Compact 

Case),607811 

(Molded 

Case),607815 

Chrome 31614-83 Dual Fire 3 607819 


Gray 31646-98 Single Fire 3 890706 



SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.49

09100 

672493 

6 

Thunderbolt Coil 

The internal windings 

are 100% immersed in an 

oil-filled jacket. The oil 

insulation cannot become 

brittle with age or crack from 

heat like conventional jelly 

materials. Includes wirecore 

‘yellow jacket’ spark 

plug leads with black 90° 

plug boots, a chromed coil 

bracket, hardware and a 

“THUNDERBOLT” sticker. 

25588 12-volt coil with 5.0 

Ohms of resistance 

for use with pointtype 

ignition systems 

Stock Replacement 

Coils by Powerband 

While these coils all share the 

same physical configuration 

as the current production 

late-model electronic ignition 

coil, they all feature the exact 

same electrical specifications 

of their respective Original 

Equipment counterparts. 

Note: These coils are not interchangeable. 

Misapplication may shorten point life or 

damage other components. 

Fits all 12-volt Sportster or Big 

Twin models from 65-79 with 

points or Prestolite electronic 

ignitions. 


65A 

Fits Big Twin models from 84- 

99 and Sportster models from 

85-03 with V-Fire III ignitions. 


83 

09413 

Dynatek ‘Twin Fire’ 

High-Output Coils 

The perfect complement to 

digital electronic ignition 

systems. Each unit packs two 

individual 40,000 volt coils into 

one high-performance single 

fire unit, for FXR, Dyna Glide 

and Softail models in stock 

locations using stock brackets 

and covers. 

• No exposed lamination 

to rust and degrade 

performance 

• Terminals machined from 

solid brass 

• High impact thermoplastic 

housings are ultrasonically 

welded and sealed against 

moisture 

• 3-Ohm resistance with peak 

gap current in excess of 

500ma 

• Accepts 7 to 8mm sparkplug 

wires 

• Made in the USA. 

For Single Spark Plug Heads 

Easily fits under the gas tanks 

of Sportster and Touring 

models. 

09100 Two output towers 

(MFG #DC6-5) 

For Dual Spark Plug Heads 

Slightly larger than a stock 

coil and features high and low 

mount output towers. 

09413 Four output towers 

(MFG #DC6-4) 

Note: These single fire coils were designed to 

be used with digital electronic ignitions with 

dwell control such as the Dyna 2000 Digital. 

EFI Coil for Twin Cam 

by Daytona Twin Tec 

High output ignition coil for 

fuel injected Twin Cam models 

from 00-06. Mounts in stock 

location. Sold each. 

672494 

672477 

High Output Coils by 


672493 3 Ohm primary, 

compatible with all 

Twin Tec and most 

aftermarket single 

fire ignitions. Fits 

Shovelhead models 

70-84, Sportster 

models 71-84 and 

Evolution Big Twin 

models 84-99 (except 

those equipped with 

fuel injection). 

672494 0.5 Ohm primary, 

fits 99-06 carbureted 

Twin Cam and 

Sportster 04-06. 

Replaces OEM 31655- 

99 (WILL NOT replace 

OEM 31639-99) 

672477 3 Ohm mini coil , 

compatible with 

most single fire ignitions, 

includes bag 

with terminals (ARB 

O.E. number D-641-2) 

Sold each. 

Chrome-Plated 

Original-Style Coil 

Original-style square coil 

complete with copper core 

wires, connectors and bracket. 

Available to fit many models 

from 48-E82. They’re not 

compatible with electronic 

ignitions on 80-Up models. 

Plug wires are 13” and 23” 

long. Sold each. 

17132 12-volt 

12381 

Dynatek Ignition Coils 

Dynatek coils for Harley- 

Davidson applications are 

high-quality American-made 

performance coils designed 

to provide spark voltages 

in excess of 30,000 volts 

and spark energy second to 

none. Coils may be installed 

in conjunction with Original 

Equipment V-Fire III and 

compatible after-market 

electronic and point-type 

ignition systems. Available 

in four 12-volt versions with 

single and dual towers, these 

coils are the perfect answer 

for two or four plug heads. 

Additional brackets will be 

required for installation. Sold 

in pairs. 

09422 12-volt, 3.0 Ohm coils 

with single towers 

(MFG #DC-3) 


with dual towers 

(MFG #DC-1) 


with dual towers 

(MFG #DC8-1) 


with single towers 

(MFG #DC10-1) 

672537 EFI Twin Cam coil 

6.50

APPAREL 

SEATS & 

TOURING 

Dynatek Dyna-Mite Coils 

Feature the same dependability and 

performance as the original ‘Dyna’ coils 

and produce spark voltages in excess of 

30,000 volts with spark energies secondto-none. 

All ‘Dyna’ coils are covered by a 

Limited Manufacturers Warranty against 

defects in materials and workmanship. 

12381 3.0 Ohm for electronic ignitions 

(MFG #DC6-1) 

12382 5.0 Ohm for use with point ignitions 

(MFG #DC7-1) 

Motor Factory 12-Volt Coils 

Quality replacement coils for 12-volt 

applications. Engineered to the exact 

specifications and design as the Original 

Equipment parts they replace. They’re 

available for 65-79 models or 80-84 

models equipped with V-Fire II or V-Fire III 

electronic ignitions. 

Note: These two coils are not interchangeable. Installation 

of the 80-84 coil on earlier models, or the installation of the 

65-79 coil on later models, may shorten point life or damage 

other electronic components on the vehicle. 

17130 Fits 12-volt models from 65-79 

with points or Prestolite electronic 

ignitions (repl. OEM 31609- 

65A) 

17131 Fits all Shovelhead models from 

80-84 and Sportster models from 

80-82 with V-Fire II electronic 

ignition, as well as Sportster 

models from 83-84 with V-Fire III 

ignitions (repl. OEM 31609-80) 

RevTech Coils 

High-output, 80,000 volt coils that work 

with 3 Ohm electronic ignitions on most 

Big Twin models from 80-99 and Sportster 

models from 80-03. Available in single or 

dual fire versions that fit under Original 

Equipment coil covers. 

28714 Dual fire 

28673 Single fire 

Ignition Coil for Twin Cam by 

Blue Streak 

Designed for a stock replacement ignition 

coil on 02-06 Touring, 01-05 Dynas, 00-06 

Softails and 04-06 Sportsters. Carbureted 

models only. Sold each. 

668345 TC repl. ignition coil 

Single Fire Ignition Coil by 

Blue Streak 

High Quality coil for use with most single 

fire applications (except Twin Cam). 3 

Ohm primary resistance. Sold each. 

668344 Single fire coil 

ACCEL Stealth Supercoil 

The all new ACCEL Stealth SuperCoil is 

the hottest looking and best performing 

ignition coil on the market. The ACCEL 

Stealth SuperCoil eliminates the need for 

ignition wires forever by mounting the 

coil directly to the spark plug. A beautiful 

cast aluminum cover holds the coil in 

place and acts as a functional heat sink to 

pull heat away from the cylinder head. All 

wiring is hidden in the fins of the head for 

a clean and custom look. 

• Patent pending design mounts the coil 

directly to the spark plug 

• Custom, clean, wireless appearance 

• Proven automotive technology for your 

air cooled Twin Cam 

• Maximum spark energy to the plugs 

• Limited Lifetime Warranty 

656070 Black for EFI Softail models 

01-17, EFI FL models 09-16 and 

EFI Dyna models 06-17 

656071 Natural for EFI Softail models 

01-17, EFI FL models 09-16 and 

EFI Dyna models 06-17 

668367 

668368 

Accel Super Coils for Twin 

Cams 

These ACCEL Motorcycle Super Coils 

are designed to produce the maximum 

amount of spark energy, fast coil rise 

times and a voltage output that is 

45% higher than the OEM coil. The 

ACCEL Super Coil is our highest output 

motorcycle coil. The Electronic Super Coil 

is easily installed in the OEM location 

using stock (later model year) coil covers 

on electronic ignitions. 

668367 Accel Carbureted Twin Cam -06 

668368 Fits fuel injected Softails 01-06, 

Dynas 04-05 and 2011 and 

Touring models 02-07 

Accel Power Pulse Coil 

Accel performance coil with a unique 

design that provides longer spark 

duration with a greater KV rating and 

faster rise time than the stock coil. 

Molded in bright yellow epoxy, it is 

guaranteed to improve starting, midrange 

response and top-end performance. 

25507 Fits 12-volt models with 

point-triggered or Prestolite electronic 

ignitions from 65-79 (4.2 

Ohm primary resistance) 

Accel Single Fire 3 Ohm ‘Super 

Coil’ 

This ‘Super Coil’ is just as powerful as the 

original. Makes for a perfect replacement 

or upgrade and will bolt right on with no 

modifications to your bracket. Fits all Big 

Twin and Sportster models (except Twin 

Cam models or fuel injected models) with 

aftermarket single fire ignitions from 65- 

06. Comes in black and ‘Accel Yellow’. 

668002 Yellow 

668033 Black 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.51

25236 

651307 

6 

Chrome Coil Bracket 

Heavy-duty chrome plated coil brackets 

for Big Twins 48-82. Can also be used for 

custom builds with frames having the coil 

mounts on the left hand side of the down 

post. 

25236 Coil bracket repl. OEM 31728- 

78TA 

651307 Coil bracket repl. OEM 31725- 

48A 

618388 

Accel Super Coils 

These coils produce up to 67% more 

voltage than stock coils. They also have 

a faster rise time and longer spark 

duration which provide quicker starting, 

an improved idle and crisper throttle 

response. Other features include a 

finned top which acts as a voltage dam 

to prevent arcing, carbon-tracking 

and “flashover”, as well as improved 

configurations to permit simple bolt-on 

installations. Come in black or ‘Accel 

Yellow’ or chrome. Fits all 12-volt models 

with point-triggered or Prestolite 

ignitions from 65-79 (4.7 Ohm primary 

resistance). 

25410 Yellow 

668031 Black 

Fits all models with electronic ignitions 

(except Twin Cam engines and fuel 

injected Evolution engines) from 80-03 

(2.3 Ohm primary resistance) 

25411 Yellow 

668032 Black 

Note: These coils may not be used in conjunction with CC #’s 

15205 or 15206 coil covers due to interference problems. 

Coil Relocation Kit 

This bracket relocates the coil and ignition 

switch between the cylinder heads. 

Fitment Note: Horn Needs To Be 

Relocated., Color: Black Powder 

Coated, Unit: Kit, Qty.: 1 

PART# 

FITMENT 

917042 07-13 Sportster 

917043 14-20 Sportster 

618387 

Ignition Switch Relocation 

Brakets for Sportster by ODC 

618387 For Sportster 04-13 (on primary) 

618388 For Sportster 92-03 (on battery 

case) 

MW Black Billet Twin 

CamMotor Mount 

Black top motor mount made of billet 

aluminum and black powder coated 

finish. Fits Twin Cam models 


Cylinder Brackets for Dyna by 

ODC 

With this bracket, relocate your coil and 

horn between the cylinders. 

656150 For Dyna 99-17 

6.52

APPAREL 

618383 

SEATS & 

TOURING 

618386 

888406 

FOOT 

CONTROLS 

619662 

Accel ‘300+’ Plug Wire Sets 

8.8 mm core has 300% greater current 

capacity than most other ‘highperformance’ 

ignition wires, yet still 

suppresses radio frequency interference 

that electronic ignition systems demand. 

HAND 

CONTROLS 

LIGHTING 

23788 Fits all Softail models from 91-99 

619661 

690831 

23782 Fits Dyna Glide models from 

91-98; Softail models from 84-90; 

FX models from 85-86; Sportster 


ELECTRICAL 

23827 Fits Touring models from 99-06 

(except models with Delphi fuel 

injection) 

EXHAUST 

Cylinder Brackets for 

Sportster by ODC 

With this brackets, be free to relocate 

your choke, coil or ignition switch on your 

Sportster. 

618386 With choke relocation for 

Sportster 04-06 

619662 With coil relocation for Sportster 

07-20 

619661 With coil and ignition switch 

relocation for 07-20 Sportster, 

except 08-10 XR1200, 10-13 

XR1200X(must be used with a 

tank lift) 

Coil & Key Switch Relocation 

Kit 

Black powder coated. 

888406 XL 04-06 

690831 XL 07-13 888406 

23789 Fits Touring models from 91-98 

23787 Fits Evolution Sportster models 

(except XL1200S models) from 


23828 Fits 4-plug Sportster XL1200S 

from 98-06 

23783 Fits 4-speed FX models from late 

78-84 and 4-speed FL models 

65-84 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Coil Relocation Kit 

Black powder coated. 

888407 XL 14-20 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Universal Black Spark Plug 

Wires by Compu-Fire 

For use with all custom applications 

utilizing single or dual plug heads and any 

coil combination. 

FORKS & 

SHOCKS 

SHEETMETAL 

Ignition Coil Relocation Kit 

23232 8mm spiral wound plug wire set 

for four-plug applications 

• Converts the position of the coil up and 

closer to the engine 

• OEM bracket needs shortening 

INSTRUMENTS 

& GAUGES 

Coil Relocation Bracket by 

Cult Werk 

Steel bracket black powder coated to 

relocate the coil under the tank section. 

No change of wiring needed! 

PART# FITMENT COLOR FINISH 

912725 

18, 23 

Softail 

Black Powder 

Coated 

LUBRICANTS & 

CHEMICALS 

Fits 06-19 Sportster 

893742 Coil bracket 

TOOLS & 

EQUIPMENT 


6.53

6 

409 Pro Race 10,4mm Ignition Wires 

• Taylor‘s .409-inch, 10.4mm diameter high performance ignition wires are available for street or track applications. 

• „409” ignition wires provide continuous heat protection up to 600-degrees Fahrenheit and 102,000 volts dielectric strength and is 

recommended for extreme under hood temperatures and open wheel racing. 

• Features a Spiral-Wound core with 350 ohms per foot resistance for EMI and RFI suppression delivering maximum fire power 

without radio interference and recommended for use with multiple-spark discharge and electronic ignition systems. 

• Available in three color choices, Black, Red, and Blue, with color coordinated low profile 100% silicone PRO BOOTS® featuring 

vibration proof double spring locking spark plug terminals. 


FITMENT BLACK BLUE RED 

00-17 Softail, except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB, 99-17 Dyna 602165 602167 602166 

07-20 Sportster, except 08-10 XR1200, 10-13 XR1200X 602171 602172 

09-16 Touring, 09-16 Trike 602180 602182 602181 

17-23 Touring, 17-23 Trike 917698 917700 917699 

18-23 Softail 917701 917702 

66-79 FL Shovel, 71-84 FX Shovel, 85 FX Model, 91-98 Dyna, 84-99 Softail, 65-85 Sportster except FXR 602162 602164 602163 

Models 

80-84 FL Shovel, 85-98 Touring, 86-03 Sportster, except 98-03 XL1200S 602168 602169 

82-84 FX Shovel, 85-94 FX Model Only FXR Models 602177 602179 602178 

99-08 Touring, 04-06 Sportster 602176 602175 

Pro-Spark 8mm High Performance Ignition Wires 

• Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts 

due to its affordable value and overall high performance 

features 

• Spiro-Pro‘s two-layer 100% silicone inner core & outer 

jacket keeps the wires flexible for the life of your vehicle 

maintaining its vibrant color with heat protection to 600º F 

• Taylor Cable’s Spiro-Pro wire consists of a high conductive 

spiral wound core with a Stainless Steel wire and covered with 

a fluorocarbon conductive material 

• Spiro-Pro features 350 ohms per foot resistance which 


provides more fire power to the spark plugs than OEM resistor 

core wires and has up to 10 times less resistance than standard 

resistor core wires 

• Spiro-Pro eliminates radio frequency interference (RFI) and is 

recommended when using a multi spark discharge, electronic 

ignition systems and other electronic components 

• Features Taylor Cable’s EXCLUSIVE low profile 100% silicone 

PROBOOTS® with vibration proof Stainless Steel double 

spring locking spark plug terminals 

FITMENT BLACK BLUE RED YELLOW 

00-17 Softail, except 08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 602134 602137 602135 

FXSB, 99-17 Dyna 

07-20 Sportster, except 08-10 XR1200, 10-13 XR1200X 602142 602145 602143 

08 FXCW, 08-11 FXCWC, 11-12 FXS, 13 FXS 103, 14-16 FXSB 602158 602161 602159 

09-16 Touring, 09-16 Trike 602154 602155 

17-23 Touring, 17-23 Trike 917704 917707 917705 917706 

18-23 Softail 917708 917711 917709 

66-79 FL Shovel, 71-84 FX Shovel, 85 FX Model, 91-98 Dyna, 84-99 Softail, 602130 602133 602131 

65-85 Sportster except FXR Models 

80-84 FL Shovel, 85-98 Touring, 86-03 Sportster, except 98-03 XL1200S 602138 602141 602139 

82-84 FX Shovel, 85-94 FX Model Only FXR Models 602150 602153 602151 

99-08 Touring, 04-06 Sportster 602146 602149 602147 

6.54

APPAREL 


SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Accel 8 mm Spark Plug Wire 

Sets 

Accel 8 mm wires deliver up to 5x more 

energy to the spark plug. Fully compatible 

with Fuel Injected or Carbureted engines. 

Can withstand temperatures over 500º. 

Silicone outer layer available in a variety 

of colors. 

Fits 00-17 FXST, FLST Models (except 

FXCW/C) 

668068 Black 

668069 Red 

Fits 99-17 FXD/FXDWG Models 



Fits 99-08 FLHT/FLTR Models 



Fits 09-16 FLHT/FLTR Models 

668362 Black 

668359 Red 

Fits 07-20, except 08-13 XR1200/X 

668358 Black 

668355 Red 


Accel Thundersport 5mm 

Ignition Wire Kits 

Half the diameter of stock wire and extremely 

flexible. Easy to run through cylinder heads, 

rocker covers, and frame tubes for a totally 

hidden look. 150 Ohms per foot Ferro- 

Spiral wound alloy conductor delivers super 

performance. The high gloss 5mm silicone jacket 

is rated for over 550 degree F and 60KV. They 

are available in four different colors, and packed 

with two 5 foot leads with 90 degree spark plug 

ends crimped on. Just run the wire, cut off excess, 

and follow the easy instructions to terminate the 

straight coil boots. Fits all models except those 

with Delphi fuel injection. 

668003 Black 

668006 Blue 


Chrome Spark Plug Covers by 

Kuryakyn 

Simply pushes over the spark plugs 

to cover the plugs and head bolts 

next to them. Chrome-plated die-cast 

construction. Sold in pairs. 

Note: Will not fit aftermarket head castings. 

48018 Fits Evolution Big Twin 84-99 and 


Accel Black 8.8 mm Custom 

Wire Sets 

Black with black plug boots. Non-resistor 

stainless-reinforced high-conductivity 

silver-plated copper wire or resistor 

suppression core. High dielectric-strength 

silicone plug boots prevent arcing to 

cylinder heads, and brass coil terminals 

have weatherproof boots attached at the 

factory to insure perfect termination. 

Stainless/Copper Core 

26872 Fit all Sportster models with 

magneto from 58-69 

26870 Fit all 4-speed FL and FX models 

from 65-E78 

Suppression Core 

26868 Fit all 4-speed FL and FX models 

(except Softail models) from late 

78-84 

26869 Fit Sportster models from late 

78-85, FX models from 85-86; 

Softail models from 84-90; Dyna 

Glide models from 91-98 

26875 Fit Evolution Sportster models 

(except XL1200S models) from 

86-03 

26873 Fit all FXR models from 82-99 

26874 Fit all 5-speed Touring models 

80-84 

26884 Fit all Softail models from 91-99 

26885 Fit all Touring models from 91-98 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.55

912637 

912632 912634 912636 

913161 913163 

6 

Custom Spark Plug Wires 

• These wire sets feature extra thick 8 mm silicone jacket and silicon insulation to eliminate electrical leakage or RFI interference that 

interrupts electronic ignitions and EFI systems. 

• 500 Ohms per foot 

• Maximum RFI protection shields sensitive electronics 

• Up to 5 times more peak energy than other „performance“ wires 

• Custom fit sets are ready to install, no cutting or splicing required 

• Include wire tires for a factory appearing installation 

FAMILY FITMENT FIELD OF APPLICATION BLACK RED 

Dyna 99-07, 10-17 Dyna, 99-02 M2, 99 S3, 03-10 XB, 99-02 

X1, 08, 09 FXDB, 08, 09 FXDC, 08, 09 FXDF, 08 FXDL, 

08 FXDSE2, 09 FXDFSE 

M2 99-07, 10-17 Dyna, 99-02 M2, 99 S3, 03-10 XB, 99-02 



S3 99-07, 10-17 Dyna, 99-02 M2, 99 S3, 03-10 XB, 99-02 



Compatible with both carbureted and 

fuel injected systems. 





668060 668061 



Softail 00-03, 06-17 Softail, 04, 05 FLSTCI, 04 FLSTFI, 04 Compatible with both carbureted and 668068 668069 

FXSTBI, 04, 05 FXSTDI, 04, 05 FXSTI, 04, 05 FXSTSI, 05 fuel injected systems. 

FLSTFSE, 05 FLSTN, 05 FLSTNI, 05 FLSTSCI, 05 FXSTD 

Softail 08 FXCW, 08-11 FXCWC, 11, 12 FXS, 13 FXS103, 14-17 

912632 912634 

FXSB 

Softail 17-23 Touring, 17-23 Trike 912636 912638 

Softail 18-23 Softail 913161 913163 

Sportster 06 Sportster, 04, 05 XL1200C, 04, 05 XL1200R, 04, 

05 XL883, 04 XL53C, 05 XL883L, 05 XL883R, 05 

XL(H)53C, 99, 00, 02, 03, 07, 08 FLHT, 99-02, 07 

FLHTC, 99-06 FLHTCUI, 02, 04, 05 FLHTCI, 03, 04, 

06 FLHTI, 04 FLHTCSE, 05 FLHTCSE2, 06 FLHTCUSE, 

07, 08 FLHTCU, 07 FLHTCUSE2, 07, 08 FLHTP, 08 

FLHTCUSE3 

Sportster 07-20 Sportster, except 08-10 XR1200, 10-13 

XR1200X 

Touring 06 Sportster, 04, 05 XL1200C, 04, 05 XL1200R, 04, 

05 XL883, 04 XL53C, 05 XL883L, 05 XL883R, 05 

XL(H)53C, 99, 00, 02, 03, 07, 08 FLHT, 99-02, 07 

FLHTC, 99-06 FLHTCUI, 02, 04, 05 FLHTCI, 03, 04, 

06 FLHTI, 04 FLHTCSE, 05 FLHTCSE2, 06 FLHTCUSE, 

07, 08 FLHTCU, 07 FLHTCUSE2, 07, 08 FLHTP, 08 

FLHTCUSE3 








668358 668355 


Touring 09, 10 FLHT, 09-13 FLHTC, 09, 10, 12, 13 FLHTCU, 09 Compatible with both carbureted and 668362 668359 

FLHTCUSE4, 09, 10, 13 FLHTP, 09 FLTR, 09 FLTRSE3, 

10 FLHTCUSE5, 10-13 FLHTK, 10, 13 FLTRX, 11 

FLHTCUSE6, 11 FLTRUSE, 12 FLHTCUSE7, 12 FLTRXSE, 

13 FLHTCUSE8, 13 FLHTK_ANV, 13 FLTRU, 13 

FLTRXSE2, 13 FLTRXSE2_ANV 


Touring 17-23 Touring, 17-23 Trike 912636 912638 

Trike 17-23 Touring, 17-23 Trike 912636 912638 

X1 99-07, 10-17 Dyna, 99-02 M2, 99 S3, 03-10 XB, 99-02 



XB 99-07, 10-17 Dyna, 99-02 M2, 99 S3, 03-10 XB, 99-02 









6.56

APPAREL 

668335 

SEATS & 

TOURING 

FOOT 

CONTROLS 

668339 

Blue Streak Plug Wires for 

Points Ignitions 

For older points style ignitions Blue Streak 

offers a ‘Copper Core’ plug wire set with 

improved electrical conductivity and 

mechanical strength. These non resistive 

sets should only be used with points 

ignitions, proudly made in the USA. 

HAND 

CONTROLS 

LIGHTING 

668340 

668336 

668260 Fits XL and XLCH models with 

magneto 65-69 

668261 Fits all XL models 71-78 

668262 Fits 65-78 FL, FLH and 71-78 FX 

FXE models 

Kuryakyn ‘Scorpion’ Head Bolt 

Covers for Twin Cam Models 

Held in position with set screws, insuring 

rattle-free performance. With this design, 

the spark plugs can be removed without 

taking the covers off. Sold in pairs. 

48271 Fits all Twin Cam models from 

99-17 except 17 Touring models 

ELECTRICAL 

EXHAUST 

INTAKE 

895448 

ENGINE 

GASKETS 

668338 

Blue Streak Silicone Plug Wire 

Sets 

These replacement plug wire sets feature 

triple silicone construction throughout 

jacket, insulation and core. They meet or 

exceed SAE J2031 and J2032 specifications. 

Proudly made in the USA. 

668330 Universal multi-fit set 

668331 Fits all Softails 84-99, FXD 91-98 

and FL 80-84 

668332 Fits all FLT, FLHT, FLHR, FLTR 

models 85-96 and FLHS 82-93 

668333 Fits all FXR models 82-99 

668334 Fits XL models (except 1200S) 

86-03 


models 97-98 


models 99-08 

668337 Fits all FXD models 99-17 

668338 Fits all XL 1200S models 

668339 Fits all Softail models 00-17 

668340 Universal 4 plug multi-fit set 

668341 Fits all XL models 04-06 

668342 Fits all XL models 07-20, except 

08-13 XR1200/X 

895447 Fits Touring 09-16 (repl. OEM 

32313-08) 

Blue Streak Silicone Plug Wire 

Sets 

895448 Fits Victory 08-15 

895449 Fits Indian 09-13 

895450 Fits HD Street models 


Spark Plug Wire Separators 

Machined from billet aluminum and 

available in brilliant chrome or a red, 

blue or black anodized finish with stylish 

accent grooves. Sold each. 


78413 Red 

78414 Blue 

78415 Black 

Flashlight Magnifier 

• Flashlight and magnifying glass in one 

• Perfect for reading spark plugs, jet sizes, 

and many other uses 

• Durable plastic head with chrome steel 

body 

20155 Flashlight 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.57

Pulstar Pulse Spark Plugs 

Pulstar spark plugs generate up to 12% more horsepower and torque. They improve fuel 

efficiency, throttle response. The Pulstar plugs come with iridium electrodes and a capacitor 

built in for increased spark energy. 

Note: For engines with performance modifications it is recommended to richen the air fuel mixture and slightly retard the timing. 

688110 Pulstar plug 2PK for 86-20 Sportster, except 08-13 XR1200/X, 99-17 Dyna, 00-17 Softail, 

99-16 Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 Trike 

688111 Pulstar plug 2PK for Evolution and Shovelheads 

6 

22012 


U-Groove Spark Plugs 

• High-performance spark plugs for H-D models are ideally 

suited for all temperature ranges due to high-quality materials 

• The special shape of the ground electrode produces a spherical 

spark, which prevents misfires 

• Sold in pairs 

Unit: Pair , Qty.: 1 


22000 48-65 Panhead, 66-84 FL Shovel, 71-74 FX 

Shovel 

22012 78-81, 84 FX Shovel, 78-81, 84 FL Shovel, 85-94 

FX Model, 91-98 Dyna, 84-99 Softail, 86-98 

Touring 

22016 86-20 Sportster, 99-17 Dyna, 00-17 Softail, 99-16 


3-4 

5R6A 

6R12 

Spark Plugs 

• Platinum-tipped high-performance plugs will maintain a 

precise gap longer for more consistent ignition performance 

• Better mileage 

• Side electrode is from high-chromium/nickel alloy for better 

spark at any voltage level 

Unit: Pair , Qty.: 1 


22024 78-84 FL Shovel, 78-84 FX Shovel, 85-94 FX 

Model, 91-98 Dyna, 84-99 Softail, 86-98 Touring 

22023 86-20 Sportster, except 09-10 XR1200, 10-12 

XR1200X, 99-17 Dyna, 00-17 Softail, 99-16 

Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 

Trike 

5R6A 

6R12 

Precision Spark Plug Covers 

PART# FITMENT COLOR 

FINISH 

776444 17-23 Touring, 17-20, 

22-23 Trike, 18-23 

Softail 

777185 17-23 Touring, 17-20, 

22-23 Trike, 18-23 

Softail 

Black 

Gloss 

Chrome 

6.58

APPAREL 

SEATS & 

TOURING 

Copper Plus Spark Plugs 

Spark Plugs including a wider-base insulator which provides an easier path to speed the transfer of heat and a longer insulator nose 

containing a center electrode of pure copper inside of chrome-nickel to transfer heat between firings and help resist fouling. 

Unit: Pack 

OEM# FITMENT TEXT PACK 

4 

31600012 18-23 Softail, 17-23 Touring, 15-20 Street, 17-23 Trike 920023 

PACK 

10 

3, D16 36-47 Knucklehead, 52-73 Servi Car, 45-51 GL, 45-52 WL, 45, 49-52 WLA 22140 

PACK 

24 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

32303-47A, 32301-60 48-65 Panhead, 66-74 FL Shovel, 71-74 FX Shovel, 54-78 Sportster 22115 

32311-83 78-84 FL Shovel, 78-84 FX Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 85-98 22129 031217 

Touring 

32317-86, 32362-04 86-20 Sportster, except 08-10 XR1200, 10-12 XR1200X, 99-17 Dyna, 00-17 Softail, 22122 031218 

99-16 Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 Trike 

H8C 57-78 Sportster 22120 

N12YC 78-79 FX Shovel, 78-79 FL Shovel 22121 

ELECTRICAL 

EXHAUST 

RL82YC 79-85 Sportster 22123 

INTAKE 

ENGINE 

3124339 923259 923256 923708 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

3123212 3127634 3123932 3122633 

Standard Spark Plugs 

• OEM approved 

• Triple-gasket sealing process 

• Consistent performance 

• Spark plug of choice in millions of motorcycles 

• Specified by more motorcycle manufacturers than any other spark plug company 

• Sold in box of 10 


PART# FITMENT DESCRIPTION OEM # 

3122633 79-85 Sportster BPR6HS-10 4R5 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

3123212 75-78 FX Shovel B6L H8C 

3123932 86-20 Sportster, except 08-10 XR1200, 10-12 XR1200X, 99-17 Dyna, 00-17 Softail, 99-16 DCPR7E 6R12 

Touring, 97-02 M2, 97-98 S1, 97-99 S3, 09-16 Trike 

3124339 00-02 X1, 03-10 XB, 02-17 V-Rod, 15-23 Indian Bagger, except 23 Challenger, 23 DCPR8E 10R12A, 3088051 

Challenger Dark Horse, 23 Challenger Limited, 23 Challenger Elite, 22 Challenger Dark 

Horse, 22 Challenger Limited, 12-23 Indian Cruiser, 15-23 Indian Touring, except 22-23 

Pursuit Dark Horse, 22-23 Pursuit Limited, 23 Pursuit Elite 

3127634 91-98 Dyna, 84-99 Softail, 85-98 Touring, 85-94 FX Model, 78-84 FL/FX Shovel except E78 BPR5ES11 RN12YC 

models 

923256 18-23 Softail, 17-23 Touring, 15-20 Street, 17-23 Trike CR9EB 31600012 

923259 15-23 Indian Scout, 19-23 Indian FTR MR7F 3022662 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

923708 22 Challenger Dark Horse, 22 Challenger Limited, 23 Challenger, 23 Challenger Dark 

Horse, 23 Challenger Limited, 23 Challenger Elite, 22-23 Pursuit Dark Horse, 22-23 

Pursuit Limited, 23 Pursuit Elite 


LZMAR8AI-10 3070482 

TOOLS & 

EQUIPMENT 

6.59

6 

32 Amp Heavy Duty ‘Lectric’ 

Rotor by Accel 

ACCEL Motorsports Lectric stator rotors 

are made for high vibration and daily 

drive abuse. The magnets are enclosed 

by stainless steel to protect against 

dislodging, and a super thick housing 

and splines eliminate the possibility of 

cracking. The perfect complement to 

Accel’s Lectric Stators! 

668372 32 Amp rotor for Softail and 

Dyna models 91-00 

Stock Alternator Rotor 

These are Original Equipment parts. 

Components 

75214 Rotor for all Big Twin models 

from 82-05 (OEMs 29957-81B, 

29957-85A) 

Stator Rotor, Lectric, 38 Amp 

for Harley-Davidson 

ACCEL Lectric stator rotors are made for 

high vibration and daily drive abuse. The 

magnets are enclosed by stainless steel 

to protect against dislodging and a super 

thick housing and splines eliminate the 

possibility of cracking. 

607411 Accel Lectric Rotor 38/45 Amp. 

for FXST 00-06, Dyna 04-05, 

Touring 00-05 (repl. OEM 29981- 

95) 

Compu-Fire Alternator Rotor 

for S&S Shafts 

Replacement rotor for Evolution Big Twins 

using S&S sprocket shafts. 

23226 Alternator rotor for 32 amp and 

40 amp charging systems, for CC 

#’s 23229 

Heavy Duty Forged Alternator 

Rotor by Spyke 

Thicker-than-stock black powder forged 

steel rotors have encapsulated magnets 

for durability. Features more steel 

around the critical spline contact area for 

better engagement. Ideal for high RPM 

performance applications. 

28597 Fits Softail 91-00 and Dyna Glide 


Spyke Super-Duty 32 Amp 

Charging Systems 

Heavy-duty forged steel rotors featuring 

encapsulated magnets, thick gauge 

stator windings with three rib plugs, and 

durable solid-state voltage regulators, in 

your choice of black or chrome finishes. 

Fits all Big Twins from 70-99, (except Fuel 

Injected models and TwinCams) 

28849 With black regulator 

28836 With chrome regulator 

Rotors 

895431 For models 70-03 (32, 18, 22, 

32 Amp)(repl. OEM 29957-81B 

/29956-70) 

895432 For models 95-04 with 3 Phase 

Stator, 38 Amp (repl. OEM 29981- 

95) 

895433 For models 95-04 with 45 Amp 

system (repl. OEM 29999-97) 

6.60

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Accel Complete 38 Amp 3 Phase Charging 

System Kit 

• Heavy Duty Rotor features premium quality magnets to ensure 

long life 

• Stator is precision wound with premium copper to ensure long 

life and the highest possible output 

• Controlled by a premium chrome plated regulator 

668052 Complete Charging System – Fits Softail models 01-06 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Compu-Fire 3-Phase Charging Systems 

These charging systems provide 25 amps at idle and 40 amps 

continuously above 2.800 rpm. The unique narrow rotor and 

stator combination fits the primary cases and voltage regulator 

bolts on Softail and Dyna Glide models without any frame 

modifications. The precision balanced vented rotor keeps the 

stator cooler in closed primary systems to maintain maximum 

output under all high-current draw conditions. The large flanged 

seal spacer provides maximum support for the rotor and the 

voltage regulator output is calibrated to 14.25 volts from idle on 

up to red line. 

610303 Fits Big Twins with enclosed primaries from 81-99 

610316 Fits Big Twins with enclosed primaries from late 99-02 

610304 Fits Big Twins with enclosed primaries from 03-06 

(Except 06 Dyna, 06 Touring) 

610305 Fits Big Twins with open belt drives from 81-99 

610306 Fits Big Twins with open belt drives 03-06 (except 06 

Dyna and Touring) 

Replacement parts 

610325 Stator for 610303 and 610305 

610327 Vented rotor for 610306 

Compu-Fire Charging Systems 

A must have for overloaded electrical systems! 

• Made in the USA, delivers increased charging 

• Systems include stator, rotor and voltage regulator 

32 Amp Charging Systems 

Each kit includes a stator, rotor and a black rectifier/regulator. 

17016 Fits all Big Twin engines with Original Equipment sprocket 

shafts from 81-99 

23229 Fits all S&S Evolution Big Twin engines or stock engines 

with S&S sprocket shafts 

Replacement Parts 

17030 32 amp for Evolution Big Twin models from 89-99 

17014 Alternator rotor for CC #17016 

23226 Alternator rotor for 32 amp and 40 amp charging systems, 

for CC #’s 23229 

17018 32 amp stator for CC#’s 17016 and 23229, for most carbureted 

Evolution Big Twins from 89-99 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.61

923975 18876 

895435 

Stators 

OEM replacement stator units meet or exceed factory standards. Some deliver a higher output specially when needed for a higher 

electric consumption on the bike such as stereo systems, CB radios or charging devices for mobile handhelds etc.. 


6 

FITMENT 

PLUG ELECTRICAL 

STYLE CURRENT 

OEM # ACCEL MOTOR 

FACTORY 

STANDARD 

MOTORCYCLE 

PRODUCTS 

00 Softail, 99-03 Dyna 32 AMP Unmolded E 32.0 29951-99 895435 

00 Softail, 99-03 Dyna 38 AMP Unmolded E 38.0 29951-99 668028 

00 Softail, 99-03 Dyna 38 AMP Unmolded Stator E 38.0 29951-99 899998 

01-06 Softail, 04-06 Dyna 38 AMP Unmolded N 38.0 30017-01 668053 

01-06 Softail, 04-06 Dyna 38 AMP Unmolded Stator H 38.0 30017-01 899999 

02-05 Touring B 29987-02 668381 

02-05 Touring 45 AMP Unmolded B 45.0 29987-02 895436 

02-05 Touring 45 AMP Unmolded Stator B 45.0 29987-02 900002 

04-06 Dyna, 01-06 Softail 38 AMP Unmolded N 38.0 30017-01 895439 

06-16 Touring 50 AMP Unmolded M 50.0 29987-06 668375 

06-16 Touring 50 AMP Unmolded Stator, 3 Phase M 50.0 29987-06 900003 

07-13 Sportster 32 AMP Unmolded Stator G 32.0 29997-07 900004 

07 Dyna, 07 Softail 40 AMP Unmolded Stator N 40.0 30017-07 900000 

07 Softail, 07 Dyna 40 AMP Unmolded N 40.0 30017-07 668373 

08-17 Softail, 08-17 Dyna 40 AMP Unmolded Stator M 40.0 30017-08 900001 

18-23 Softail, 17-23 Touring, 17-23 Trike 48 AMP Unmolded 

Stator 

K 48.0 29900042 923975 

70-75 FL Shovel, 71-75 FX Shovel 18 AMP Unmolded, Plug A C 18.0 29965-70 56225 

76-80 FL Shovel, 76-80 FX Shovel 17,8 AMP Molded D 17.8 29965-75 18871 

76-80 FL Shovel, 76-80 FX Shovel 22 AMP Molded, Plug B D 17.0 29965-75 56226 

81-84 FL Shovel, 81-84 FX Shovel, 85-88 FX Model, 85-88 

Touring, 84-88 Softail 22 AMP Molded, Plug C 


Touring, 84-88 Softail 22 AMP Molded 


Touring, 84-88 Softail 22 AMP Unmolded, Plug C 

F 22.0 29965-81 56227 

F 22.0 29965-81 18872 

F 22.0 29965-81 56228 

84-90 Sportster Except E84 models 22 AMP Molded, Plug E L 22.0 29967-84 56222 

89-94 FX Model, 91-98 Dyna, 89-99 Softail, 89-96 Touring 

Except EFI models 32 AMP Unmolded, Plug D 

89-94 FX Model, 91-98 Dyna, 89-99 Softail, 89-96 Touring 

Except EFI models 32 AMP Unmolded 

J 32.0 29970-88 56229 

J 32.0 29970-88 18876 895440 

91-06 Sportster 17 AMP Unmolded Stator L 17.0 29967-89 640950 

91-06 Sportster 22 AMP Unmolded L 22.0 29967-89 18877 

97-98 Touring 38 AMP Unmolded E 38.0 29987-97 668029 

97-98 Touring 40 AMP Unmolded Stator L 40.0 29987-97 640951 

97-98 Touring 45 AMP Unmolded A 45.0 29987-97 895437 

99-01 Touring 38 AMP Unmolded E 38.0 29987-99 668374 

99-01 Touring 40 AMP Unmolded Stator E 40.0 29987-99 640952 

99-01 Touring 45 AMP Unmolded A 45.0 29987-99 895438 

6.62

A 

B 

C 

D 

E 

APPAREL 

SEATS & 

TOURING 

640951 

900002 

56225 

56226 

640952/ 900002/ 899998 

FOOT 

CONTROLS 

F 

G 

H 

J 

K 

HAND 

CONTROLS 

LIGHTING 

56227/ 56228 

900004 

899999 

56229 

923975 

ELECTRICAL 

L 

M 

N 

P 

EXHAUST 

INTAKE 

56222/640951/640950 

900001 

900000 

ENGINE 

GASKETS 

P 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Replacement Stator 

• Meets or exceed OEM Standards 

• 32 AMP Versions available 

• Perfect for overloaded electrical systems 

Part#: 17018, Plug Style: P, Fitment: 89-94 FX Model, 91-98 

Dyna, 89-99 Softail, 89-98 Touring, Unit: Each, Qty.: 1 

Crankcase Stator Plug Wire Retainer 

Part#: 919714, Fitment: 70-84 FL Shovel, 71-84 FX Shovel, 

85-94 FX Model, 84-99 Softail, 85-98 Touring, 91-98 Dyna, 

Color: Stainless Steel, OEM #: 45095-85, Unit: Pack, Qty.: 10 

Motor Factory Charging System Upgrade Kits 

Enjoy a remarkable improvement in electrical performance by 

installing one of these Motor Factory 32-amp systems. Each one 

includes a Motor Factory alternator, rectifier/regulator and an 

alternator rotor. Fit all Big Twins except Twin Cam Models from 

70-99. 

56230 With black rectifier 

56232 With chrome rectifier 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

Stator Mounting Kit 


030608 Includes lock plates, plug retainer and hardware. Fits Big 

Twins 70-13 

TOOLS & 

EQUIPMENT 

6.63

6 

Motor Factory Finned Rectifier/Regulators 

These rectifier/regulators utilize the latest state-of-the-art surface-mount technology. Unlike many products on the market today, 

our rectifier/regulators are made with screen-printed circuit boards and ceramic components which lower operating temperatures 

for longer life without temperature-related failures. They deliver improved electrical performance for lighting, battery and ignition 

which also helps protect valuable power sources and wiring. Standard black finish with polished fins or fully chromed. Engineered in 

the USA. 

See table for applications. 

Motor Factory Solid-State Voltage Regulators for Generator Models 

Solid-state voltage regulators replace earlier-style mechanical regulators on generator-equipped bikes. No battery needed for lights if 

used with magneto. Covered by our exclusive ‘High Voltage’ limited warranty that effectively extends coverage to one full year from 

date of installation. 

See table for applications. 

Regulators (for more images visit our Dealer Store) 

Replacement regulators manufactured under highest standards to replace the OEM units. They meet or exceed the factory quality 

by far. To make the identification easier we added the connecting Plug-Style in the table chart which can be identified on the right 

hand page. 

FITMENT 

PLUG 

STYLE 

OEM # 

MOTOR 

FACTORY 

BLACK 

MOTOR 

FACTORY 

CHROME 

00 Softail H 74512-00 648362 648363 

01-06 Softail K 74540-01, 74610-01 648364 648365 

02-03 Touring P 74505-02 648384 648385 

04-05 Dyna N 74631-04 648378 648379 

04-05 Touring S 74505-04 648386 648387 

04-06 Sportster R 74523-04 648368 648369 

06-07 Dyna Q 74631-06 648380 

06-08 Touring T 74505-06 648388 648389 

07-08 Sportster, except 08 XR1200 T 74546-07 648370 648371 

07 Softail M 74540-07 648374 648375 

08-17 Dyna T 74631-08 648382 648383 

08-17 Softail T 74540-08, 74540-11 648376 648377 

08-17 V-Rod T 74440-08 899982 899983 

09-13 Sportster, 08 XR1200 T 74711-08 648372 648373 

09-16 Touring, 09-16 Trike T 74505-09 899980 899981 

66-77 Sportster, 65 Panhead, 66-69 FL Shovel Solid State G 74507-85, 74510-64, 74510-65 25369 

Regulator to replace Mechanical Regulators on Generator 

Models 

70-75 FL Shovel, 71-75 FX Shovel B 74510-70 25358 25365 

76-80 FL Shovel, 76-80 FX Shovel C 74510-75, 74512-79 25359 25366 

77-81 Sportster E 74504-78 25354 25361 





A 74515-86, 74516-86, 74513-85, 74512- 

84, 74513-82 

A 74515-86, 74516-86, 74 513-85, 74512- 

84, 74513-82 

82-84 Sportster Except L84 models D 74505-82, 74504-82 25355 25362 

84-85 Sportster Except E84 Models. F 74523-84 25356 

86-90 Sportster F 74523-84 25357 25364 

89-94 FX Model, 91-98 Dyna, 89-99 Softail, 89-96 Touring J 74519-88, 74537-93 25353 25372 

Except EFI models 

91 Sportster F 74523-91 25349 25350 

92-93 Sportster F 74523-92 25351 

94-03 Sportster L 74523-94, 74490-00 25328 25329 

97-01 Touring H 74505-97 648366 648367 

99-03 Dyna H 74518-99, 74561-99 648360 648361 

25360 

25367 

6.64

APPAREL 

SEATS & 

TOURING 

668024 648377 648364 648366 

25328 

FOOT 

CONTROLS 

PLUG CHART REGULATORS 

HAND 

CONTROLS 

A 

B 

C 

D 

E 

LIGHTING 

ELECTRICAL 

G 

H 

J 

K L M 

EXHAUST 

N 

P Q 

R S 

T 

U 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

Regulator Deutsch Connector Kit 

• Connectors and terminals 

• For XL 94-03 models 

670305 Regulator connector kit (OEM 74119-98BK) 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Regulator Wiring Cover 

This kit has everything you need to braid your existing regulator 

wiring. 

893427 Regulator wiring cover 

Precision Voltage Regulator Cover 

PART# FITMENT COLOR FINISH 

776427 17-23 Touring, 17-23 Trike Chrome 

776428 17-23 Touring, 17-23 Trike Black Gloss 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.65

23235 

17030 

19284 19282 

6 

Compu-Fire High Performance 

Series Voltage Regulators 

• New generation series regulator 

obsoletes outmoded shunt regulators 

• Black powder coated, bolt-on 

replacements 

• Voltage output is suitable for 

maintenance-free batteries 

• Reduces load on stator and extends 

stator life 

• Reduces engine drag for extra power 

• Delivers high performance at an 

exceptional cost! 

17030 32 amp for Evolution Big Twin 


Alternator Plug Retainers 

Standard and chromed heavy-duty retainers 

prevent rectifier/regulator plugs from working 

loose. Fit all Big Twin models (except EFI and Twin 

Cam models) from 70-99. 

19284 Standard retainer, stainless steel 

(held by engine case bolts) card 

of 5 

19282 Chrome-plated heavy-duty model 

(held by front motor mount bolt) 

card of 5 

Regulator Cover for Softails 

by Kuryakyn 

A stock voltage regulator normally fades 

into the background, but with this sharp 

new Voltage Regulator Cover it will 

be right in the spotlight! Deep fins & 

beautiful chrome, it really stands out! For 

01-17 Softails. 

605208 Softail regulator cover 

17031 22 amp for Big Twin models from 

81-88 

17035 22 amp for Sportster models 

from 91-99 and Buell models 

(except Blast and Firebolt models) 

from 93-96 

Compu-Fire Chrome Billet 

Series Voltage Regulators 

Offering the same sophisticated technical 

features as their line of OEM-style 

regulators, but in an attractive “bulletproof” 

chrome billet case with mounting 

bracket. 

23235 32 amp for Evolution Big Twin 


Alternator Plug Retainer 

Comes with self-tapping screws unlike the 

Original Equipment part it replaces. Fits 

Big Twins from 70-99. Sold on a card of 5. 

19281 Replaces OEM 29954-71 

Chrome Regulator Cover for 

Touring Models by Kuryakyn 

A two-piece design that uses a stamped 

steel base and a chrome composite top 

to cover your stock voltage regulator. 

Routing holes for the wires and a wellvented 

design keeps your regulator 

running cool. Two functional and 

decorative chrome fasteners add the 

finishing touch. 

600393 Fits all Touring models from 

97-07 

12492 

12493 

18900 

Regulator Brackets 

These chrome brackets mount solidstate 

regulators on models with solidlymounted 

motors. 

19261 Fits Big Twins including Softail 

models from 76-86 (repl. OEMs 

74533-75, 74534-80) 

640912 

Accel Mechanical Regulators 

Top-quality American-made units 

feature heavy-duty shock mounted steel 

bases, vibration-resistant internal wire 

connections, fiber and mylar insulated 

pads, and large diameter contact surfaces. 

640911 

12-Volt Bosch-Style 

Fits XLH from 65-66 and XLCH from 65-77. 

12495 Black (repl. OEM 74511-65) 


12-Volt Delco-Style 

Fits FL models from 65-69 and XLH from 

67-77. 

12493 Chrome (repl. OEM 74507-85T) 

6-Volt Delco-Style 

Fits 54-64 KH, XL and XLH models, and 52- 

64 6-volt FL models. 


Chrome Rectifier Regulator 

Mounting Bracket 

Fits rubber-mounted 5-speed models 

from 80-03 (except Dyna Glide models). 

This reproduction steel bracket has an 

extra set of holes for a second mounting 

position when relocating the rectifier/ 

regulator on custom applications. 


Voltage Regulator Covers 

All are chrome finished with all necessary 

mounting hardware. Just bolt it on. 

640911 Fits Softail models from 89-99 

(repl. OEM 74578-97) 


(repl. OEM 74597-01) 

640913 Fits Dyna Glide models from 

91-03 (repl. OEM 74577-97) 

640914 Fits Sportster models from 85-03 

(repl. OEM 74579-97) 

6.66

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Motor Factory Generator 

Regulator with Integral 

Charging Monitor 

Cure electrical system reliability problems 

with the Motor Factory solid state 

regulator with integral charging LEDs. 

It attaches directly to the end of the 

generator and is enclosed in a die-cast 

aluminum housing with polished fins 

on the end. Solid state components are 

completely sealed in epoxy to eliminate 

moisture and vibration problems giving 

completely reliable service. Green and red 

LEDs give continuous readout of system 

performance. Green wire to field, red wire 

to armature and black wire to battery. 

Requires battery. 

28092 Fits all Sportster models from 

65-77 and FL models from 65-69 

with 12-volt generators 

All Balls 12V Generators 

These premium units fit Big Twin and 

Sportster models. They feature machine 

wound armatures, hardened shafts and 

premium bearings are used throughout. 

Available in standard black finish or show 

quality chrome. Fits 65-69 big twins and 

65-81 Sportsters with 12V systems. 

668420 Generator 12V black 

Accel Generator Armature 

This American-made 12-volt armature 

features: heavy gauge copper wire 

windings; precision- machined and 

finished shafts; long-life, solid copper 

commutator and heavy service lamination 

segments. 


and Big Twins from 65-69 (repl. 

OEMs 30851-65A, 30851-86T) 

Generator Brush Set by 

Standard 

Replacement brush set for all two brush 

generators from 58-64. 

668343 Brush set 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Precision Starter Cover 

TRANNY & 

CLUTCH 


FINISH 

776416 17-23 Touring, 17-23 Chrome 

Trike 

776446 Black Gloss 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

12V Generators by Cycle 

Electric 

Quality generators made in the USA. 

Available with or without built in 

regulator. Model without regulator 

requires current limiting regulator (10 A) 

to prevent damage due to excess current 

draw. 

685470 Generator with regulator 

685471 Generator only 

685472 Repl. regulator 

Battery Eliminator Kit by 

Accel 

Boost spark voltage at cranking and 

eliminate flickering lights at low speed 

with ACCEL Motorcycle battery eliminator. 

Includes shock-resistant mounting clamps 

and attachment hardware. Made in the 

USA 

668371 Battery eliminator 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.67

6 

Motor Factory Hitachi-Type 

Starter Motors 

The latest in starter technology 

performance has been integrated in this 

starter. With heavy duty bearings that 

provides better reliability, and higher 

torque output for dependable starts. Fits 

73-88 

644072 Black starter motor assembly 

(repl. OEM 31570-73) 

644073 Chrome starter motor assembly 

(repl. OEM 31559-89T) 

28606 Chrome starter motor end cover 

(repl. OEM 31565-67) 

28624 Drive gear end ball bearing, fits 

all Hitachi starters on Big Twins 

from 73-88 and Sportster models 

74-76 (repl. OEM 31583-73) 

Motor Factory Prestolite-Type 

Starter Motors 

Reproductions of the Original Equipment 

Prestolite electric starter motor used on 

many models from 66-82. Chrome end 

cover kit and replacement parts are also 

available. 

644070 Black starter motor assembly 

(repl. OEM 31458-66TA) 

644071 Chrome starter motor assembly 

(repl. OEM 31463-88T) 


(repl. OEM 31565-67) 

28604 Drive gear end ball-bearing, fits 

all Prestolite starters on Big Twins 


from 67-73 or 77-80 (repl. OEM 

31539-66) 

2 KW Starter 

• High-Quality replacement starter units. 

PART# FITMENT FINISH OEM# 

899977 

94-06 Touring, 

94-06 Softail 

Raw 

31558- 

94 

693871 693870 923966 923966 923966 

899978 644060 644062 644064 

OEM Replacement Starter 

High-Quality replacement starter units. 

Power: 1.4 kW, Unit: Each, Qty.: 1 

PART# FITMENT COLOR OEM # 

693870 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Chrome 31621-06 

693871 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Black 31618-06 

644060 94-05 Dyna, 94-06 Softail, 94-06 Touring, 94 FX Model Aluminium, Raw 31553-94, 31558-94, 31559-99 

644062 94-05 Dyna, 94-06 Softail, 94-06 Touring, 94 FX Model Black 31335-03 

644064 94-05 Dyna, 94-06 Softail, 94-06 Touring, 94 FX Model Chrome 31559-99 

644061 89-93 FX Model, 91-93 Dyna, 89-93 Softail, 89-93 Touring Aluminium, Raw 

644063 89-93 FX Model, 91-93 Dyna, 89-93 Softail, 89-93 Touring Black 31552-89 

644065 89-93 FX Model, 91-93 Dyna, 89-93 Softail, 89-93 Touring Chrome 

923966 91-20 Sportster Black 31390-86, 31390-91 

899978 91-20 Sportster Chrome 31390-86, 31390-91 

6.68

APPAREL 

SEATS & 

TOURING 

36251 

36265 

FOOT 

CONTROLS 

Accel Generator 

Repair Kit 

Top-quality American-made 

generator repair kit for 12- 

volt, 2-brush generators. Fits 

FL models from 65-69 and 

Sportster models from 65-81. 

Kit includes a pair of brushes, 

gasket, seal and packet of 

grease. 

25515 Repair kit 

Compu-Fire 1084 Gear 

Set 

Engineered to increase the 

starter motor torque by 

lowering the gear ratio of 

the pinion gear to the clutch 

ring gear. When used as a 

replacement for the 9:66 ratio 

gear sets, a 15% increase in 

torque is obtained. Can also 

be used as a re-placement for 

the weak 10:102 ratio gear sets 

which are prone to breaking. 

610302 Fits all Big Twins from 

98-06 (except 06 Dyna) 

Chrome Generator 

End Cover Kit 

This die-cast end cover is the 

perfect finishing touch for the 

generator on both stock and 

custom motorcycles. It installs 

easily in minutes and fits all 


as well as 58-69 Big Twins. 


83T 

Generator Mounting 

Hardware from 

Colony 

High quality generator 

mounting hardware made in 

USA by Colony. Fit Big Twins & 

Sportsters as noted. 

Chrome Sockethead Screw 

Kits 


71-E84 

36265 Fits Big Twins 58-69 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

921784 

921785/921786 921785 

921783 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

030393 

030394 

Starter 

Starters feature all new construction and are way stronger than the Factory units. Available in black or chrome/polished finish. 

Starters include a special conversion jackshaft bolt that allows these starters to fit most Big Twins. 


PART# FITMENT COLOR OEM # POWER KW 

030393 89-94 FX Model, 91-05 Dyna, 89-06 Softail, 89-06 Touring Black 31553-94B 1.4 

030394 89-94 FX Model, 91-05 Dyna, 89-06 Softail, 89-06 Touring Chrome 1.4 

030395 89-94 FX Model, 91-05 Dyna, 89-06 Softail, 89-06 Touring Chrome 1.7 

921784 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Black 31618-06A 1.4 

921785 18-23 Softail Black 31400057 1.4 

921786 17-23 Touring, 17-23 Trike Black 31400053 1.4 

921783 81-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 03-10 XB Black 31390-91F 1.4 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.69

6 

All Balls Early Model Starters 

New, up to date 1.4 KW designs that replace Hitachi and 

Prestolite type starters. They are more compact, but generate 

twice the shaft speed and 50% more power than the original 

versions. Available in with black or chrome finishes. A great 

remedy for those hard to start big-inch motors! 

Black 

030396 Hitachi starter (repl. OEM 31570-73) 

030398 Prestolite starter (repl. OEM 31458-66TA) 

28675 

28664 

28666 

693871 

PMGR 1.6 kW Starter for Early Big Twins by 

Compufire 

Permanent Magnet Gear Reduction (PMGR) Starter Motor for all 

65-88 Harley-Davidson Big Twins. Mates to the OE starter gear 

case and output shaft. 1.6 kW of cranking energy. 

610328 PMGR starter 

693870 

M.E.S. Starters for Late-Model Twin Cams 

1.4kw gives your bike more cranking power. Starters feature 

M.E.S. lifetime starter clutch. Available in either a chrome-plated 

or black finish. 

Fits all06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike models 


693871 Black 

Spyke SuperTorque 1.4KW Starters 

High-performance motors demand high-performance starting 

power, which is exactly what Spyke starters are built to provide. 

Full 1.4 KW rating, which is up to 25% more torque than stock. 

Increased cranking speed and low amperage-draw design 

delivers fast, reliable starts with less battery drain. 

For Big Twins from 94-06 (except 06 Dyna) 

28661 Black 

28596 Polished 

For Big Twins from 89-93 

28660 Black 

For Big Twins from 86-88 

28663 Black80-86 FXWG-FXSB, 84-Early 86, FXST 

82-Classic, 83-85 FLH-80, 80-84 Solid Mount w/ 

Rear Belt 


For Big Twins with Rear Chain Drive (except rubbermounted 

Models) from L79-85 


For Rubber-Mounted Big Twins (except enclosed rear 

chain) from 80-85 


For Big Twins with Rear chain Drive from 65-E79 


For Sportster and Buell models 81-20 

28669 Black 

6.70

APPAREL 

SEATS & 

TOURING 

Compu-Fire ‘Gen III’ Starters 

The ‘Gen III’ turns over a full 2kw of starting power while 

only drawing 175 amps from the battery. This chrome and 

polished starter features a removable jackshaft coupler, ultra 

powerful neodymium magnets, innovative high torque clutch 

and 6:1 planetary gear reduction. It has the power to start 

large displacement, high-compression motors, even without 

compression releases. All in a short, compact package. 

643882 Fits all Evolution and Twin Cam 88 Big Twins from 90-06 

(except 06 Dyna) 

643883 Fits all big bore Twin Cam 95 Big Twins from 90-06 (high 

speed) (except 06 Dyna) 

Easy Starter Kits for Big Twin Models 

Improves starting on high-compression big inch engines through 

an improved starter-to-clutch basket gear ratio. Complete kits 

include a clutch basket for Big Twin models with a 66-tooth 

starter ring and a 9-tooth starter pinion gear. 

17664 Complete kit for Big Twin models from 94-97 

17665 Complete kit for Big Twin models from 98-06 (except 06 

Dyna) 


17448 Clutch basket with ring gear for CC #17664 

17663 Clutch basket with ring gear for CC #17665 

23185 66-tooth starter ring gear with hardware fits only CC 

#17420 clutch basket and OEM 37707-90 

23183 9-tooth pinion gear 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 


‘The 

Slugger’ 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

1.5 kw Starter for late Twin Cams by Terry 

Components 

Available in chrome or black finish 

Fits all 06-17 Dyna and 07-17 Softail and 07-16 Touring 

models 

640685 Chrome 


Ring Gear Conversion Kits 

Ring gear conversion kits are precision machined from 8620 steel, 

heat treated and case hardened. Kit consists of ring gear and 

bolts. 

66T Conversion Kit for OEM Baskets 

893668 Big Twin 90-97 

893669 Big Twin 98-06 (except Dyna 06) 

84T Conversion Kit for OEM Baskets 

893665 Big Twin 90-93 

893666 Big Twin 94-97 

893667 Big Twin 98-06 (except Dyna 06) 


47900 47909 

47901 

High-Torque Starters by Terry Components 

1.8KW ‘The Slugger’ Starters 

• ‘Universal’ starters offer superior windings, high tolerance 

heavy-duty clutch, and thicker commentators that resist flying 

shorts 

• Static balanced for smoother operation 

• Low-profile design clears the electronic speedometer sender 

for easy installation 

• Puts out the same amount of torque as a 2.0KW with less 

amperage drain 

640644 Polished/Chrome for Big Twins from 89-93 

640645 Black wrinkle for Big Twins from 89-93 

640646 *Polished/Chrome for Big Twins from 94-06 (except 06 

Dyna Glide models) 

640647 *Black wrinkle for Big Twins from 94-06 (except 06 Dyna 

Glide models) 

*Note: Installation of these starters on Touring models will require the additional purchase of a 

CC #640643 Oil Pan Dipstick Adapter. 

Replacement Parts for Terry Starters 

47900 Solenoid repair kit (also fits most Original Equipment 

and aftermarket Nippon Denso starters) 

47901 Starter brush holder for 1.4KW starters 

47902 Starter brush holder for 1.6KW and 2.0KW starters 

47909 Starter clutch for 1.2KW, 1.4KW and 1.8KW starters 

47910 Starter clutch for 1.6KW and 2.0KW starters 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.71

28626 

28811 

050434 

050437 

28818 

050443 

25504 

25531 

644074 

28074 

6 

09778 

28627 12082 

Replacement Starter Parts for Big Twin and Sportster Models 

Listed below in CC part number order. Sold each unless noted otherwise. 

09778 Starter housing bearing (replaces OEM 9062) sold each 

09782 Fits 4-speed Big Twin models with Prestolite motor 65-E79 (repl. OEM 31465-65) 1/4-20 threads 

12082 O-ring, starter crank, 37-86 (replaces OEM 11101). Pack of 10. 

25504 Starter drive (Accel) for all Big Twin models from 65-88, and Sportster models from 67-80 (replaces OEM 31443-65A). 

25531 Starter drive for all Big Twin models from 65-88, and Sportster models from 67-80 (replaces OEM 31443-65A). Made in USA 

28074 Needle bearing for Sportster models from 67-80, and FX and FL chain drive models from 65-84 (replaces OEM 9063) 

28626 Starter gear shift lever for all 4-speed Big Twin chain drive models from 65-84 (replaces OEM 31445-65A) 

28627 Oil deflector plate for 4-speed FL chain drive models from 65-82, and 4-speed FX chain drive models from 71-85 (replaces OEM 

60516-65A) 

28811 Pivot screw, gear shift lever for inner primary cover on all 4-speed Big Twins from 65-86 (replaces OEM 31478-65A). Sold in 5 pack. 

Top screw. 

28818 Thrust washer, starter drive for all 4-speed Big Twins from 65-80 and Sportster models from 67-80 (replaces OEM 31502-65). Sold 

in pairs. 

050434 Shifter collar starter shaft for all 4-speed Big Twin chain drive models from 70-84 (replaces OEM 31503-70) 

050437 Snap ring for 4-speed FX and FL models from 65-88 and Sportster models from 67-80 (replaces OEM 11039). Pack of 10. 

050443 Thrust washer, starter drive for all 4-speed Big Twins from 65-80 and Sportster models from 67-80 (replaces OEM 31502-65). Made 

in USA. Pack of 5. 

644074 Starter drive (replaces OEM 31443-65A) 

09782 

25020 



Generator Parts 

Listed below in CC part number order 

25020 Bearing, drive gear. Fits 58-81 Big Twin and Sportster models (repl. OEM 9007) 

25306 Oil seal, end cover. Fits 61-73 Big Twin and Sportster models (repl. OEM 12002). Pack of 5. 

54061 Oil seal, drive gear. Fits 46-81 Sportster and Big Twin models (repl. OEM 30145-46A) pack of 10 

6.72

APPAREL 

893531 

893514 

SEATS & 

TOURING 

893507 

893534 

FOOT 

CONTROLS 

893509 

893508 

893514 

893515 

893533 

Pinion Gears by Primo Rivera 

893529 9 tooth pinion gear Big Twin 

Brute 4 and 5 belt drives with 66 

tooth ring gear 


94-06 (except Dyna models 06 

with 66 tooth ring gear) 


90-93 with 84 tooth ring gear 


94-06 (except Dyna models 06 


HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

893512 

893516 

ENGINE 

Starter Ring Gears for Big 

Twins by Rivera 

High quality replacement starter ring 

gear kits for fitment on Primo belt drive 

baskets. They are available with 66 tooth, 

102 tooth and 106 tooth configurations 

(ring gear bolts are included). There is 

also an 84 tooth kit sold with matching 10 

tooth pinion gear for 90-93 & 94- models 

running a Brute lll or Brute lll Extreme. 

893507 66 teeth Big Twins 37-84 with 

rivets for early belt drives 3 holes 

893508 66 teeth Big Twins 37-84 with 

bolt model Brute , classic , Brute 

2 

893509 84 teeth Big Twins 90-93 fits with 

10 teeth pinion gear Brute 3 / 

Extreme 

893511 84 teeth Big Twins 94-06 fits 

with 10T Pinion Gear Brute 3 / 

Extreme, 


893512 106 teeth Big Twins 07-, Dyna 

06- with Bolt Brute 3 Extreme / 4 

Extreme 

893513 102 teeth Big Twins 98-06 (except 

06 Dyna models) chain drive 

Seal Kit Starter Housing & 

Shift Lever by James Gaskets 

667114 65-81, Shovelhead 

893517 

Ring Gear Conversion Kits by 

Primo Rivera 

Specially designed kits which allow you 

to convert existing stock ring & pinion 

combinations to the more advantageous 

combos offered by a 66 tooth ring gear 

with a 9 tooth pinion gear for 94-06 

Big Twins (except ‘06 Dyna Models) or 

a middle of the road 84 tooth ring gear 

with a 10 tooth pinion gear which will 

offer more starter motor torque on the 

early models yet help prevent ring gear 

breakage from starter kickback on the 

later models equipped with 102 tooth ring 

gears. 

893514 66 teeth / 9 teeth Big Twin 94-97 

893515 66 teeth / 9 teeth Big Twin 98-06 

(except 06 Dyna models) 

893516 84 teeth / 10 teeth Big Twin 

90-93 


94-97 


98-06 (except 06 Dyna models) 


Starter Jackshaft Assemblies 

by Rivera Primo 

893521 Without pinion gear for Big 

Twins 89-93 

893522 Without pinion gear Big for 

Twins 94-06 (except Dyna models 

06) 

893523 For Big Twins 89-93 (except those 

with 10 tooth pinion gear or use 


893524 For Big Twins 94-06 (except Dyna 

Models 06, those with 10 tooth 

pinion gear or use with 84 tooth 

ring gear) 

893525 For Big Twins 94-06 (except Dyna 

models 06, with 9 tooth pinion 

gear or use with 66 tooth ring 

gear 

893528 For Big Twin 94-06 (except Dyna 

models 06 , with 10 tooth pinion 

gear or use with 102 tooth ring 

gear) 

Starter Shaft Assemblies 

Starter shaft assemblies are precision 

machined from aircraft quality steel, heat 

treated and black oxide coated. 

For Big Twin 94-06 (except Dyna 06) 

893655 66T 

For Big Twin 90-03 

893653 84T 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.73

Replacement Starter Jackshaft 

Kits 

Complete jackshaft kits include starter 

shaft, coupling, pinion gear, clips, spring, 

locktab, washers and screws. 

Starter Shaft Bolt Lock Tabs 

Part#: 924480, Fitment: 94-05 Dyna, 

94-06 Softail, 94-05 Touring, 94 FX 

Model, OEM #: 33126-94, Unit: Pack, 

Qty.: 10 

921763 

28380 10-tooth for Big Twins from 94-06 


6 

628370 9-tooth for 94-06 Big Twins from 

when using a 66-tooth starter 

ring gear on 94-06 models 


28381 9-tooth for Big Twins from 89-93 

Replacement Starter Motor 

Parts 

Listed below in OEM part number order. 

All parts are sold each unless noted 

otherwise. 

3 5/8" 

921764 

75279 Gear shaft screw for Big Twins 

from 94-05 (repl. OEM 4358) pack 

of 10 

75281 Retaining ring (repl. OEM 11248) 

pack of 10 

75276 Pinion gear for Big Twins from 

94-05 (repl. OEM 31342-94) 

921765 

75288 Thrust washer for Big Twins from 

89-93 (repl. OEM 31430-93) 

75277 Thrust washer for Big Twins from 

94-03 (repl. OEM 31430-94) pack 

of 5 

28382 Coupling for Big Twins from 

89-93 (repl. OEM 31548-90) 

75289 Lockplate for Big Twins from 

89-93 (repl. OEM 33126-93) 

75278 Lockplate for Big Twins from 

94-05 (repl. OEM 33126-94) pack 

of 5 

28384 Extension shaft for Big Twins 

from 89-93 (repl. OEM 33127-90) 

92200 Starter shaft bushing for Big 

Twins from 89-93 (repl. OEM 

33445-89) 

92201 Starter shaft bushing for inner 

primary on Big Twins from 94-05 

(repl. OEM 33445-94) 

92214 Starter shaft bushing for outer 

primary on Big Twins from 94-05 

(repl. OEM 33446-94) 

Spyke Grind-Free Jackshaft Kit 

This Grind-Free jackshaft with 9 tooth 

pinion gear fixes the grind associated with 

many 3“ open belt drives that utilize onepiece 

jackshafts. The grind-free is a three 

piece unit with ramped teeth and enough 

flex to integrate seamlessly with any belt 

drive. 

683394 Fits Big Twin models from 94-06 

with 3” open-belt drive 


28678 

Spyke Starter Jackshaft Kits 

Includes starter shaft extension, couplings 

and components for complete starter 

installation. 

One Piece Jackshaft Kit 



921763 89-93 FX 

Model, 

91-93 Dyna, 

89-93 

Softail, 89- 

93 Touring 

921764 94 FX 

Model, 

94-05 

Dyna, 94-06 

Softail, 94- 


921765 94 FX 

Model, 

94-05 

Dyna, 94-06 

Softail, 94- 


9 Tooth 

10 Tooth 

9 Tooth Conversion 

Starter Bearings 

Replacement bearings for Prestolite and 

Hitachi starter motors. Sold each. 

28678 Fits Big Twin models from 94-06 


28677 Fits Big Twin models from 89-93 

28604 Drive gear end ball-bearing, fits 

all Prestolite starters on Big Twins 


from 67-73 or 77-80 (repl. OEM 

31539-66) 

28624 Drive gear end ball bearing, fits 

all Hitachi starters on Big Twins 


74-76 (repl. OEM 31583-73) 

6.74

APPAREL 

28627 

SEATS & 

TOURING 

28626 

Starter Gear Shift Lever and 

Oil Deflector Plate 

Fit all Big Twin models with 4-speed 

transmissions and rear chain drives from 

65-84 (except 83-84 FL). 

921760 921761 

Heavy Duty Starter Drive by 

MES 

A typical starter drive gear contains five 

rollers. This starter drive gear contains six 

rollers providing a more reliable starter 

gear, and less wear. 

644074 Starter drive (replaces OEM 

31443-65A) 

FOOT 

CONTROLS 

HAND 

CONTROLS 

28626 Starter gear shift lever for all 

4-speed Big Twin chain drive 

models from 65-84 (replaces OEM 

31445-65A) 

LIGHTING 

28627 Oil deflector plate for 4-speed FL 

chain drive models from 65-82, 

and 4-speed FX chain drive models 

from 71-85 (replaces OEM 

60516-65A) 

921762 921768 

921767 

Accel Starter Drive 

This unit fits all electric start models from 

65-88 (except 81-88 Sportster models). 

25504 Starter drive (Accel) for all Big 

Twin models from 65-88, and 


(replaces OEM 31443-65A). 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

Starter Motor Housings 

Replacement starter motor housings that 

duplicate the Original Equipment parts 

which commonly have the mounting ears 

broken off. Needle bearing not included. 

09782 Fits 4-speed Big Twin models with 

Prestolite motor 65-E79 (repl. 

OEM 31465-65) 1/4-20 threads 

09778 Starter housing bearing (replaces 

OEM 9062) sold each 

921770 

Starter Drive 

• Direct OEM replacement 


Starter Drive Clutch by Spyke 

Stock replacement for OEM 31663-90. For 

Big Twin 90-05, XL883 95-02, XL1200-Buell 

91-03. 

28960 Starter clutch (repl. OEM 31663- 

90) 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Heavy Duty Starter Drive 

Beefier than the factory part for longer 

life with high torque starters. Fits all 

electric start models from 65-88 (except 

81-88 Sportster models). 

25531 Starter drive for all Big Twin 

models from 65-88, and Sportster 

models from 67-80 (replaces OEM 

31443-65A). Made in USA 


921760 91-94 FX Model, 

91-05 Dyna, 91- 

06 Softail, 91-06 

Touring 

921761 89-90 Softail, 89-90 

Touring, 89-90 FX 

Model 

921762 06-17 Dyna, 07- 

17 Softail, 07-16 


921767 67-80 Sportster, 




85-88 Touring, 84-88 

Softail 

921768 81-20 Sportster, 

97-02 M2, 97-98 S1, 

97-99 S3, 99-02 X1, 

03-10 XB 

921770 18-23 Softail, 17-23 


31663-90, 

31516-94 

31544-90 

31633-07A 

31443-65A 

31556-91D 

693872 

Starter Clutch by M.E.S. 

693872 Fits 06-17 Dyna, 07-17 Softail and 

07-16 Touring models 

644066 Fits all 1.2 kw, 1.4 kw and 1.8 

kw on all Big Twin models from 

90-05 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.75

25008 

668348 

Starter Drive 

668348 81-90 XL starter drive 

895445 91-06 Big Twins (repl. OEM 31663-90) 


895445 

895434 

6 

High Quality Delco Remy Style Starter Relay 

Starter relay reduces the voltage drop in single fire ignition 

applications during cranking and will allow full 12 volt battery 

voltage to the module and coil. 

Part#: 920510, Fitment: 67-68 FL Shovel, 71-74 Sportster, 

OEM #: 71455-67B, Unit: Each, Qty.: 1 

Starter Solenoid Repair Kit 

Kit includes seals, gaskets, solenoid plunger, copper terminals 

and contacts. 

25008 For Big Twin models 89-06 (repl. OEM 31604-91) 

895434 For Big Twin 65-83, Sportstser 67-80 (repl. OEM 71465- 

85T) 

668349 

668350 

Starter Solenoid 

• OEM Replacement 


921766 921769 


921766 67-80 Sportster, 65 Panhead, 66-84 FL 

Shovel, except 80-84 FLT, 81-84 FLTC, 71-84 

FX Shovel, except 82-84 FXR, 82-84 FXRS, 

83-84 FXRT, 84 FXRSDG, 84-88 Softail 

921769 18-23 Softail, 17-23 Touring, 17-23 Trike 

71469-65B 

Standard Starter Solenoids 

Solenoids for 4 speed and 5 speed Big Twins. 

Starter Solenoid for Big Twin 65-81 Single Bracket 


Starter Solenoid for Big Twin 80-86 Dual Bracket 


895442 

895441 

921758 921759 

Solenoid Chrome 

895441 For FL 65-84, XLH 76-78, FXE/F/S 71-85, XL 79-80, FX/FXE/ 

FXEF80 79-85,FXB 80-85, FXSB 83-85,FXST 84-88,FXWG 

85-86 (Repl. OEM 71469-65B, 71469-69) 

895442 For FLT 80-88, FXR/P 82-88 (Repl. OEM 31489-79B, 

31511-90T,31526-81B) 

6.76 

Starter Solenoid Rebuild Kit 



921758 81-20 Sportster, 97-02 M2, 

97-98 S1, 97-99 S3, 99-02 

X1, 03-10 XB 

921759 06-17 Dyna, 07-17 Softail, 

07-16 Touring, 09-16 Trike 

31603-91 


26430 668377 

Starter Solenoids (Single Bracket) 

A variety of imported or Accel starter solenoids. Fit all Sportster 

models from 67-80 and Big Twins from 65-88 (with solenoid 

mounted parallel to primary cover) including all 4-speed models 

and all Softail models. 

Accel Starter Solenoids 

25003 Plain (repl. OEM 71469-65TB) 

668377 Black (repl. OEM 71469-65B) 

26430 Chrome (repl. OEM 71470-86T)

APPAREL 

25046 

668378 

Starter Solenoids for 5-Speed Models (Dual 

Bracket) 

Accel starter solenoids for all 5-speed Big Twin models from 80- 

88 (except Softail models). 

Accel Starter Solenoids 

25045 Plain (repl. OEM 31489-79TB) 

668378 Black (repl. OEM 31489-79B) 


Solenoid Mounting Kit 

Fits Big Twin models from 65-88 and Sportster models from 67-80 

with 2 hole mounting tab. Includes mounting spacer bolts and 

lock washers. 

050419 Replaces OEM 31452-65 

Solenoid Inner Boot 

Rubber solenoid inner boot for all 65-88 Big Twins and 67-80 

Sportster models. Sold each. 

25033 Replaces OEM 31441-65A 

Fail-safe Pushbutton for Terry Components 

Starters 

Fail-Safe Switch. Use as a "backup" system or as a custom starter 

button. Mounts on the end of the solenoid and installs in 

minutes. For Terry Components 1.2 and 1.4 KW starters. 

640687 Chrome Fail Safe Switch 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

Spyke Solenoid Repair Kit 

Includes plunger assembly and contacts. Fits Big Twins from 89- 

06. 

28961 Replaces OEM 31604-91 

640909 640910 

Solenoid Cover Starter Button Switches 

Can be used as a “back up” system or as a custom starter button 

without the need for a starter switch on your handlebars. It 

bypasses the stock relay, permitting starter activation at the push 

of a hidden button. Fits stock bikes and customs using late style 

1.2kw, and 1.4kw output type starters. 


640910 Black wrinkle finish 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Starter Solenoid Repair Kit 

Repair kit for the electric starter solenoids on all models from 

65-88 (except 81-88 Sportster models). 

25006 Replaces OEM 71465-85T 

Chrome Solenoid Cover 

No adjustment needed to mount this triple chrome-plated cover. 

It slides over the solenoid and mounts with existing bolts to the 

primary case. Fits all 4-speed Big Twins from 65-86 and all Softail 



WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Starter Solenoid Connector & Terminal 

893291 1-Position locking connector. Pack of 5 (OEM 72295-94) 

Rubber Solenoid Cover 

Rubber solenoid cover for Big Twin models. 

25025 Replaces OEMs 31444-65A, 31475-77 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 


Clean-up the looks of your bike with this chrome cover for the 

starter solenoid. 

25036 Fits all models from 89-06 



Fits the solenoid boot on Softail and 4-speed FL/FX models from 

65-88. 

25040 Includes a new solenoid boot 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.77

683450 

683449 

Custom Horn Cover for 

Sportster Models 

Cover snaps over stock horn on XLH 883 

models from 86-93 and XR 1000 models 

from 83-84. Replaces OEM 39038-88T 

350109 Horn cover 

6 

Pullstart Lever for 65-88 Big 

Twins by CPV 

The coolest way ever to start your shovel. 

Turn the ignition on and pull the beefy 

lever! Relay sold seperately. 

683449 Raw finish 

683450 Black Anodized 

893978 

Chrome Horn Covers 

Set it off in style and add a custom touch 

to your bike with these creative horn 

cover kits. Available in 4 designs: Iron 

Cross, Flames, Skull, and Flaming Skull. 

Each one includes a new, black mini horn, 

and fits most models with vertical motor 

mount horn from 91-13. Sold each. 

609991 Flames 

Note: Requires horn bracket (OEM 69120-91) 

Ness Horn Covers 

• These round horn covers accept any 5 

hole point cover to match the theme 

of your bike. Choose Ness, HD or your 

favorite aftermarket design 

• Steel construction cover is finished in 

chrome or black powder coated finish 

• Replaces the factory “cowbell” shaped 

horn cover on 91-19 Big Twin and XL 

models 

Note: Point cover sold seperately. 

654039 Ness horn cover chrome 

654040 Ness horn cover black 

Note: With stock cowbell cover. 

Chrome Starter End Cover 

A simple-to-install chrome starter motor 

end cover kit for all Sportster models 

from 67-80 and Big Twins with Hitachi or 

Prestolite starters from 65-88. 


(repl. OEM 31565-67) 

10-Gauge Key Switch Cover 

• Billet Aluminum 

• Mounts directly over factory ignition 

switch 

• 10-Gauge style 

893979 


FINISH 

990192 15-23 Indian Scout Chrome 

Horn Covers 

893978 The Vilain (incl. horn), for Touring 02- 

16 

893979 Stealth (incl. horn), for Touring 02-16 

6.78

APPAREL 

SEATS & 

TOURING 

28151 

28152 

28150 

FOOT 

CONTROLS 

Horn Covers 

Chrome-plated replacement horn covers. 

Fits low note horns on Sportster models 

76-85, and FX models from 76-80. 


Fits high note horns on Big Twins from 

late 76-90, and 76-85 Sportster 

models 


Fits Sportster models from 86-92 and 

Softail or FLT models from 91-92. 

28153 Replaces OEM 69012-86A (not 

shown) 

Fits Sportster models from 93-94 and 

Softail or FLT models from 93-03. 

28154 Replaces OEM 69012-93 (not 

shown) 

Tear Drop Horn Cover Kits by 

Paughco 

If you like Paughco’s Tear Drop air 

cleaners then you might get your kicks 

out of these matching horn covers. 

Available in vertical or horizontal mount 

versions. Mini chrome horn included. 

651298 Ribbed horn kit, horizontal 

Arlen Ness Beveled Horn Kits 

• Beveled styling with a chrome finish 

• Our new horn assemblies feature a high 

performance horn and forged billet 

aluminum construction 

• The high performance horn is capable 

of 110 dB 

• A stainless steel mesh insert is installed 

into each housing for style and 

additional horn protection 

• These horns are a perfect match to our 

Inverted Series Air Cleaners 

550165 For Twin Cam models 91-20, 

black 

550166 For Sportster models 07-20, chrome 

550167 For Sportster models 07-20, black 

550168 Universal fitment, chrome 

550169 Universal fitment, black 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

651299 Ribbed horn kit, vertical 

651300 Smooth horn kit, horizontal 

GASKETS 

Roulette Horn Cover for 

Victory Models 

Skull Horn Cover by Kuryakyn for H-D 

models 

629670 Chrome fits all 91-94 FX Model, 

91-17 Dyna, 91-17 Softail, 91-23 

Touring, 09-23 Trike, 91-20 

Sportster 

605225 Black skull horn cover for all 

91-94 FX Model, 91-17 Dyna, 


09-23 Trike, 91-20 Sportster 

Note: With stock cowbell cover. 

Mini Horn 

Small zink-plated two terminal horn packs 

a powerful sound and measures 2 1/2" in 

diameter. 

19891 Mini horn 

Deluxe Chrome Horn with 

Adjustable Mount 

Two terminal horn comes equipped with a 

universal adjustable mounting bracket. 

19892 Chrome horn 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Universal Horn with Cover 

This 12-volt horn features a universal 

mounting bracket and a removable 

chrome-plated, injection-molded cover. 

Can be used in custom applications and 

has spade-type terminals. 

31506 Universal horn 

Electric Horn 

Early-style 12-volt electric horn with 

chrome grill. This heavy-duty, top-quality 

horn has a universal mount and can be 

used in many applications. 

28120 Horn and grill 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.79

370320 

6 

6.80 

Mega Battery Cables with 12” 

Auxiliary Wire 

All Terry Components cables have 18k 

gold plating and tined copper 1666 

strand Mega Cable. The auxiliary wire is 

12 gauge tined copper 259 strand Mega 

Cable. 

Positive 

These positive battery cables with 

auxiliary wire eliminates stacking cables 

on the battery and are perfect for custom 

wiring direct to the terminal block, 

regulator or any accessory. 

647532 Positive 6" (w/12" auxiliary wire) 

Battery Cable 

647533 Positive 8" (w/12" auxiliary wire) 

Battery Cable 

647534 Positive 10" (w/12" auxiliary 

wire) Battery Cable 









Negative 

These negative battery cables with 

auxiliary wire are perfect for a custom 

bike ultra ground and eliminate poor 

electrical ground connections. Install the 

4 gauge cable to the transmission and the 

12 gauge wire to any electrical accessory 

for an ultra ground. 

647539 Negative 6" (w/12" auxiliary 














All Balls ‘Ultra Flex’ Battery 

Cables 

• Increase starter performance by 

supplying maximum battery current to 

the starter motor 

• 4-gauge cable manufactured with pure 

electrolytic grade, 36-gauge tinned 

copper strands for maximum current 

transfer and flexibility 

• Specially rated 125° C, oil and gas 

resistant, ultra flexible translucent 

jacket guarantees excellent 

performance 

• Sold each 

370320 10"-long 

370321 12"-long 

370322 14"-long 

370323 16"-long 

370324 25"-long 

Battery Cables 

• Pro-Flex battery cable 

• 4-gauge made 

• 1/4” and 5/16” heavy duty battery lugs 

BLACK 

LENGTH 

893312 6” 

893313 7” 

893314 9” 

893315 11” 

893316 13” 

893317 15” 

893318 17” 

893319 19” 

893312 

893320 

CLEAR 

LENGTH 

893320 6” 

893321 7” 

893322 9” 

893323 11” 

893324 13” 

893325 15” 

893326 17” 

893327 19” 

mo.unit Battery Cable with 40A Fuse 

The mo.unit battery cable with fuse is the possible connection cable between each 

mo.unit and the vehicle battery. It has an integrated main fuse with 40 A maximum 

current load. This high quality copper cable has high conductivity and comes with an 

integrated fuse holder, 2 fuse, 2 cable eyelets for crimping and 2 pieces of heat shrink 

tubing. One cable eyelet and heat shrink tubing are already pre-assembled 

The total length is 160 cm. 

• 1 x connection cable with approx. 8.4 

qmm cross-section (AWG 8) and 160 cm 

length. 

• 1 x integrated fuse holder. 

Part#: 920005, Length: 160 mm, Unit: Each, Qty.: 1 

• 2 x fuse 40 A. 

• 2 x cable eye. 

• 2 x heat shrink tubing. 

Bulk Battery Cable Dealer Kit 

• Pro-Flex battery cable 

• 4-gauge made 

• Include 1/4” and 5/16” heavy duty 

battery lugs 

893309 Bulk battery cable dealer kit 

893310 

Battery Lugs 

• Pack of 5 

893310 1/4” Battery lugs 

893311 5/16” Battery lugs 

893311 

Rubber Battery Straps 

Duplicates of the Original Equipment 

parts. Sold each. 

25032 Fits 5-speed Touring models from 

80-92, Softail models from 84-93, 

and 77-79 Sportster and XLCR 

models (repl. OEM 66105-77) 

300157 Rear strap for 93-10 Softail models 

(repl. OEM 66111-93) 

300158 Front strap for 93-10 Softail models 

(repl. OEM 66109-93) 

301151 Battery strap for 70-84 FLH models 

mo.unit Battery Cable without 

Fuse 

The mo.unit battery cable without fuse 

is the possible connection cable between 

each mo.unit and the vehicle battery. It 

does NOT have an integrated main fuse. 

This high quality copper cable has high 

conductivity and comes with 2 cable lugs 

for crimping and 2 pieces of heat shrink 

tubing. One cable eyelet and heat shrink 

tubing is already pre-assembled 

The total length is 60 cm. 

Part#: 920007, Length: 60 mm, Unit: 

Each, Qty.: 1

APPAREL 

921781 921776 

921782 

SEATS & 

TOURING 

FOOT 

CONTROLS 

921773 

921777 

921774 

921780 

921772 

921775 

921771 

921778 

921779 

Battery Cable Kit 

• Cables will increase starter performance by reducing voltage 

losses from undersized cables 

• Cables are manufactured with pure electrolytic grade, 

36-gauge copper wire strands 

• The 7 over 7 bundling of the copper strands maximizes current 

flow and the flexibility of the cable 

• The outer jacket material is rated for 257 °F (125 °C) and is oil 

and gas resistant 

Color: Black, Unit: Kit, Qty.: 1 

PART# 

FITMENT 

921771 84-88 Softail 

921772 89-08 Softail 

921773 85-88 FX Model, 82-84 FXR, 82-84 FXRS, 83-84 FXRT, 84 

FXRSDG 

921774 89-94 FX Model 

Mega Battery Cables 

The lugs are twice the thickness of standard lugs and are made 

from 99% pure electroplated copper, then 24k gold-plated to 

provide a positive connection with greater conductivity. Kits 

contain the lengths needed for specific applications. 

Mega Cable Kits 

647549 Fits Softail models from 08-17. Includes a 6” ground cable 

and a 10” battery-to-starter cable, except 13-17 FXSB/S/SE 

47521 Fits Softail models from 89-07. Includes a 10" ground 

cable and a 12" battery-to-starter cable 

47520 Fits Softail models from 84-88. Includes an 8" ground 

cable, a 17" battery-to-solenoid cable, and a 15" solenoid-to-starter 

cable 

47522 Fits 4-speed FL models from 65-79. Includes a 9" ground 

cable, a 16" battery-to-solenoid cable and a 16" solenoid-to-starter 

cable 

647546 Fits 07 Touring models. Includes a 17" ground cable with 

an 8" auxiliary wire, and a 13" battery-to-ground wire. 

647547 Fits 08 Touring models. Includes a 14" ground cable with 

a 1/4" bent, 45 degree lug and a 9" auxiliary wire, and a 

10" battery-to-starter cable with a 1/4" bent, 45 degree 

lug. 

647548 Fits Touring models from 09-13. Includes a 13" ground 

cable with a 1/4" bent, 45 degree lug and a 5" auxiliary 

wire. The positive cable is a 9" with a 1/4" bent, 45 

degree lug and a 5" auxiliary wire. 

647550 Fits Dyna models from 06-17. Includes 9”, 12” and 14” 

cables 

647551 Fits Sportster models from 04-13. Includes 12” and 13” 

cables 

Individual Mega Cables 

Black insulation with copper lugs. 

47530 7” 

47533 13” 

47531 9” 

47532 11” 

47534 15” 

47535 17” 

47536 25” 

47537 32” 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

921775 91-03 Dyna 

921776 66-79 FL Shovel 

921777 80-84 FL Shovel, 85-88 Touring 

921778 89-92 Touring 

921779 93-08 Touring 

921780 81-03 Sportster 

921781 04-09 Sportster 

921782 04-09 Dyna 

Yuasa Jumper Cables 

• Heavy duty, 8 foot, 8-gauge cables will not stiffen or freeze 

• Tangle-resistant, encased rubber grips for safer use 

2831656 Jumper cables 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.81

6 

RevTech Power AGM 

The RevTech Power AGM battery is identical in construction to 

the OEM-Battery and thus offers OEM-quality Made in the USA. 

The AGM design allows easy installation without the worry of 

acid spills and damage to equipment. Completely spillproof and 

leakproof. The absorbed glassmat (AGM) technology increases 

power while improving rider and environmental safety. Molded 

top and side connection terminals provide versatility, increased 

strength and durability. 

• WORRY FREE... 

• No vent tube 

• No acid leaks to cause terminal corrosion 

• Withstands damaging effects of vibration 

• Environmentally friendly, 100% recyclable 

• MAINTENANCE FREE... 

• No filling 

• No activation 

• Eliminates low water levels 

• Low discharge rates for off season storage 

MOTOBATT Quadflex AGM 

• Reduce your battery inventory by nearly 85% 

• 2 x Minus and 2 x Plus Connectors 

• Quit messing around with electrolyte 

• MotoBatt is an AGM battery, a type of sealed lead acid 

battery! 

• Get all the benefits of a GEL battery at a sensible price 

Unibat Batteries 

Unibat have been producing high performance batteries for cars, motorcycles and heavy duty vehicles for over fifteen years and is 

a leader in its field across European markets. All the shown batteries are maintenance free AGM batteries , and gives out optimum 

cranking power. This type of battery can be safely installed in almost any position, because the acid is kept by individual separators 

made of special absorbed glass material (AGM). These separators keep the acid and electric contacts between the elements. 

Unibat CX Heavy Duty AGM 

• 30% more power than classic AGM batteries 

• Reinforced and more robust design 

• Completely filled and sealed 

• Leak proof and completely maintenance free 

• Reinforced housing and connection contacts 

• Particularly resistant to vibrations and shocks 

• AGM technology with glass fiber fleece (similar to gel 

technology) 

• More charge cycles than conventional acid batteries 

• Battery installation possible in every position 

• Vibrations resistant 

Unibat Maintenance Free AGM 

• Dry Battery with Acid Pack 

• Maintenance free (MF) 

• AGM 

• Acid pack included 

• Superior starting power 

• More discharge cycles with respect to conventional batteries 

• It can be installed in any position, with no risk of acid leaks 

• Available for the majority of applications 

• Totally hermetic 

• It doesn’t need refill 

Important Notice: According to Regulation (EU) 2019/1148, 

battery acid may NOT be provided or sold to end customers. 

intAct Bike Power Gel Battery 

The heavy-duty bundle of energy copes well with the strongest road shocks and engine vibrations from 

Harleys or other large-displacement bikes and also starts two-wheelers with a high demand for electrical 

energy (e.g. with ABS). 

• Perfect for Harleys and other high displacement 2-cylinder engines 

• Highest cold currents 

• For two-wheelers with high energy requirements, e.g. ABS safety technology 

• Extremely vibration resistant, plate packs compressed and accurately fitted in the battery box 

• Robust housing made of impact-resistant plastic for heavy mechanical stresses 

• Leak-proof, can be installed at any angle, electrolyte bound as gel 

• Absolutely maintenance-free 

Important Notice on battery disposal: The following notice is addressed to those who use batteries or products with built-in batteries and no longer resell them in the form 

in which they were delivered to them (end users): You are legally obligated to return used batteries as an end user. You can return used batteries, which we carry or have 

carried as new batteries in our product range, free of charge at our shipping warehouse. The symbols shown on the batteries have the following meaning: The symbol of the 

crossed-out garbage can means that the battery must not be placed in the household garbage. 

Pb = Battery contains more than 0.004% lead by mass | Cd = battery contains more than 0.002 mass percent of cadmium | Cadmium Hg = battery contains more than 

0.0005 mass percent mercury 

6.82

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Yuasa Maintenance Free High Performance AGM Wet Charged Factory Activated Battery 

If high power is top priority in a replacement battery, look to Yuasa‘s High Performance Maintenance Free batteries. Yuasa means 

more power, less maintenance and longer life. 

• Factory Activated 

• Spill-proof design means virtually no possibility of leaks 

• Advanced lead-calcium technology pumps up starting power 

• Sulphation retardant dramatically reduces battery-killing plate sulphation 

• Long lasting which means Yuasa‘s High Performance Maintenance Free batteries will last up to three times longer than 

conventional batteries 

• Exceptional resistance to vibration makes Yuasa the most reliable battery on the market today 

• And, VRLA batteries hold voltage longer and need less charging in standby or storage mode 

• Plus Increased Power 

• Up to 30% more cranking amps thanks to a radial grid design and additional plates 

Yuasa Maintenance Free AGM Wet Charged Factory Activated Battery 

VRLA (Valve Regulated Lead Acid) means a battery that‘s perfect for people who have better things to do than battery maintenance! 

Our permanently sealed VRLA battery never needs refilling; however, it still needs periodic charging. Ideal for motorcycles, scooters, 

ATVs, riding mowers and personal watercraft. 

• Factory Activated 








Yuasa Maintenance Free AGM High Performance (with Acid Pack) 









• Plus Increased Power 

• Up to 30% more cranking amps thanks to a radial grid design and additional plates 



Yuasa Maintenance Free AGM (with Acid Pack) 

VRLA (Valve Regulated Lead Acid) means a battery that‘s perfect for people who have better things to do than battery 

maintenance! Our permanently sealed VRLA battery never needs refilling; however, it still needs periodic charging. 


• pill-proof design means virtually no possibility of leaks 









Yuasa Conventional Battery 

The Conventional 12 Volt battery is the industry standard for motorcycles, snowmobiles and ride-on mowers. 

• Specifically designed to protect against seepage and corrosion 

• Made to withstand vibration 

• Patented separators providing high cranking power 

• Through-partition construction delivers maximum power while the unique sealed posts resist corrosion for a longer battery life 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 








TOOLS & 

EQUIPMENT 

6.83

6 

FAMILY FITMENT POWER 

AGM, 

GREY 

Softail 91-23 Softail 685336 



Dyna 91-96 Dyna 685336 

Dyna 97-17 Dyna 685335 

Touring 

Touring 

97-23 

Touring 

85-96 

Touring 

REVTECH MOTOBATT UNIBAT YUASA INTACT 

685337 

Trike 09-23 Trike 685337 

Sportster 

Sportster 

Sportster 

Sportster 

Sportster 

Sportster 

RH 

Pan 

America 

04-20 

Sportster 

97-03 

Sportster 

79-96 

Sportster 

70-78 

Sportster 

(Kickstart) 

67-78 

Sportster 

(E-Start) 

21-23 

Sportster S 

RH1250S, 

22-23 

Nightster 

RH975 

21-23 Pan 

America 

656128 

685336 

QUADFLEX 

AGM 

619277 

(Yellow), 

619278 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

619305 

(Yellow), 

888214 

(Black) 

619305 

(Yellow), 

888214 

(Black) 

656129 

(Yellow), 

911424 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

CX 

HEAVY 

DUTY 

AGM, 

BLACK 

MAINTENANCE 

FREE AGM 

(DRY WITH 

ACID PACK), 

BLACK 

911760 618428 

911759 

911758 618427 

911760 618428 

911759 

FACTORY 

ACTIVATED 

MAINTENANCE 

FREE AGM, 

BLACK 

2831686, 

2831685 (High 

Performance) 

2831686, 

2831685 (High 

Performance) 

MAINTENANCE 

FREE AGM 

(DRY WITH 

ACID PACK), 

BLACK 

2831560, 

2831668 (High 

Performance) 

2831565, 

2831667 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

CONVEN- 

TIONAL 

DRY 

LEAD 

ACID 

BIKE 

POWER 

GEL, 

BLACK 

919316 

919316 

911761 618430 2831647 2831687 919317 

2831669 (High 

Performance) 

919319 

911761 618430 2831647 2831687 919317 

911757 618426 2831682 919318 

911760 618428 

685334 911758 618427 

656128 

656128 

Street XG 15-20 Street 656128 

656129 

(Yellow) 

656129 

(Yellow) 

656129 

(Yellow) 

2831686, 

2831685 (High 

Performance) 

2831668 (High 

Performance), 

2831560 

2831565, 

2831667 (High 

Performance) 

2831179 

(White) 

2831443 

(Black) 

919316 

911757 618426 2831682 919318 

911757 618426 2831682 919318 

911757 618426 2831682 919318 







6.84

APPAREL 

SEATS & 

TOURING 

FAMILY FITMENT POWER 

AGM, 

GREY 

V-Rod 07-17 V-Rod 685336 

V-Rod 

FX Model 

FL Shovel 

FL Shovel 

02-06 V-Rod, 

07 VRSCR 

85-94 FX 

Model 

80-84 FLT, 

81-84 FLTC 

66-84 FL 

Shovel 

REVTECH MOTOBATT UNIBAT YUASA INTACT 

QUADFLEX 

AGM 

619277 

(Yellow), 

619278 

(Black) 

CX 

HEAVY 

DUTY 

AGM, 

BLACK 

MAINTENANCE 

FREE AGM 

(DRY WITH 

ACID PACK), 

BLACK 

911760 618428 

685624 911756 618425 

685334 911758 618427 

FACTORY 

ACTIVATED 

MAINTENANCE 

FREE AGM, 

BLACK 

2831686, 

2831685 (High 

Performance) 

2831684 (High 

Performance) 

MAINTENANCE 

FREE AGM 

(DRY WITH 

ACID PACK), 

BLACK 

2831560, 

2831668 (High 

Performance) 

CONVEN- 

TIONAL 

DRY 

LEAD 

ACID 

BIKE 

POWER 

GEL, 

BLACK 

919316 

2831489 919320 

2831565, 

2831667 (High 

Performance) 

2831669 (High 

Performance) 

2831443 

(Black) 

919319 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

FX Shovel 

FX Shovel 

Panhead 

Indian 

Bagger 

Indian 

Touring 

Indian 

Cruiser 

Indian 

Cruiser 

Indian 

Scout 

Indian 

FTR 

Buell 

1125 

71-84 FX 

Shovel 

71-72 FX 

Shovel 

(Kickstart) 

65 Panhead 

15-23 Indian 

Bagger 

15-23 Indian 

Touring 

14-23 Indian 

Cruiser 

12-13 Indian 

Cruiser 

685334 911758 618427 

685336 911760 618428 

685336 911760 618428 

685336 911760 618428 


2831565, 

2831667 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

2831669 (High 

Performance) 

15-23 Scout 923845 923842 

19-23 Indian 

FTR 

685624 

09-10 1125 656128 

Buell XB 03-10 XB 685624 

Buell X1 99-02 X1 685336 

Buell M2 97-02 M2 685336 

911424 

(Black) 

656129 

(Yellow) 

911424 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

619277 

(Yellow), 

619278 

(Black) 

2831179 

(White) 

2831443 

(Black) 

919316 

919316 

919316 

919319 

911756 618425 2831684 923843 919320 

911757 618426 2831682 919318 

911756 618425 2831684 2831489 919320 

911760 618428 

911760 618428 

Buell S1 97-98 S1 618427 

Buell S3 97-99 S3 685336 

Custom 

Applications 


Applications 

619277 

(Yellow), 

619278 

(Black) 

911760 618428 

2831686, 

2831685 (High 

Performance) 

2831686, 

2831685 (High 

Performance) 

2831686, 

2831685 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

2831565, 

2831667 (High 

Performance) 

2831560, 

2831668 (High 

Performance) 

924936 

919316 

919316 

919316 







INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.85

PART# BATTERY TYPE OEM # COLD 

CRANKING 

AMPS 

RevTech Power AGM 

685334 YB16-B-CX 

65991-82, 

65991-75 

WIDTH X DEPTH 

X HEIGHT 

325 174 x 100 x 155 

685335 YB16HL-A-CX 65989-90 325 175 x 100 x 155 

CONFIGURATION 

685337 YIX30L 66010-97 400 165 x 128 x 178 

685624 YTX14-BS 65948-00 220 147 x 85 x 143 

656128 YTX14-LBS 65958-04 220 147 x 84 x 145 

685336 YTX20L-BS 65989-97 310 178 x 88 x 155 

MOTOBATT QUADFLEX AGM 

6 

619278 

YTX20BS, 

YTX20LBS 

65989-97, 

65991-75, 

65991-82, 

65989-90 

310 173 x 86 x 156 

888214 YIX30L 66010-97 390 164 x 126 x 177 

911424 YTX14BS 65948-00 200 130 x 87 x 151 

619277 

YTX20BS, 

YTX20LBS 

65989-97, 

65991-75, 

65991-82, 

65989-90 

310 174 x 86 x 154 

656129 YTX14-LBS 65958-04 240 150 x 89 x 146 

619305 YIX30L 66010-97 390 166 x 125 x 176 

UNIBAT CX HEAVY DUTY AGM 

911757 GYZ16HL 65958-04 275 147 x 86 x 145 

911761 GYZ32HL 66010-97 510 167 x 127 x 177 

923845 YTX14AH-BS 4014770 245 134 x 89 x 164 

911756 YTX14-BS 65948-00 275 147 x 83 x 147 

911758 YTX20H-BS 

65991-82, 

65991-75 

435 172 x 98 x 158 

911760 YTX20HL-BS 65989-97 385 173 x 87 x 155 

911759 YTX20L-BS 65989-90 435 172 x 97 x 160 

UNIBAT MAINTENANCE FREE AGM (DRY WITH ACID PACK) 

618430 YIX30L 66010-97 385 164 x 124 x 175 

618425 YTX14-BS 65948-00 200 148 x 84 x 144 

618426 YTX14L-BS 65958-04 200 148 x 87 x 144 

618428 YTX20L-BS 65989-97 270 173 x 87 x 155 

618427 YTX20L-BS 

INTACT BIKE POWER GEL 

65991-82, 

65991-75 

270 173 x 87 x 155 

919317 YIX30L-BS 66010-97 445 166 x 130 x 175 

919320 YTX14-BS 65948-00 255 149 x 87 x 144 

919318 YTX14L-BS 65958-04 255 149 x 87 x 144 

919316 YTX20L-BS 65989-97 350 176 x 87 x 154 

919319 YTX24HL-BS 66010-82 410 205 x 87 x 162 

YUASA MAINTENANCE FREE AGM (FACTORY ACTIVATED) 

2831647 YIX30L 66010-97 400 166 x 129 x 178 

2831684 YTX14H 65948-00 240 149 x 89 x 145 

2831685 YTX20HL 65989-97 310 175 x 87 x 155 

2831686 YTX20L 65989-97 270 175 x 87 x 155 







6.86

PART# BATTERY TYPE OEM # COLD 

CRANKING 

AMPS 

YUASA MAINTENANCE FREE AGM (DRY WITH ACID PACK) 

WIDTH X DEPTH 

X HEIGHT 

2831687 YIX30L-BS 66010-97 400 166 x 129 x 178 

923842 YTX14AH-BS 4014770 210 134 x 89 x 166 

2831489 YTX14-BS 65948-00 200 149 x 89 x 145 

923843 YTX14H-BS 4017581 240 150 x 87 x 145 

2831682 YTX14L-BS 65958-04 200 151 x 89 x 146 

924936 YTX15L-BS 

2831565 YTX20-BS 

2831667 YTX20H-BS 


Application 

65991-82, 

65991-75 

65991-82, 

65991-75 

230 175 x 87 x 130 

270 175 x 85 x 155 

310 175 x 87 x 157 

2831668 YTX20HL-BS 65989-97 310 175 x 88 x 156 

2831560 YTX20L-BS 65989-97 270 175 x 85 x 155 

2831669 YTX24HL-BS 66010-82 350 206 x 87 x 163 

YUASA CONVENTIONAL LEAD ACID 

2831443 YHD-12 66007-84 200 242 x 130 x 164 

2831179 12N7-4A 66006-70 74 134 x 75 x 136 

CONFIGURATION 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

‘Riveted’ Battery Covers 

Chrome-plated covers with extra nonfunctional 

buttonhead rivets for that 

high-tech “racers only” look. These covers 

complement our complete line of other 

‘Riveted’ covers. 

688077 

TRANNY & 

CLUTCH 

37258 Fits 4-speed FX models with 

electric start from 73-86 (except 

Softail models) and all Sportster 


DRIVELINE 

26375 

WHEELS, TIRES 

& BRAKES 

26376 

12296 

91297 

FRAMES 

26019 

Battery Covers for 4-Speed FL 

Models 

Show-chrome battery covers. Fit 4-speed 

FL models from 70-84. Available in two 

styles, choose the one which suits your 

taste. 

26019 Plain 

26376 Louvered 

Battery Covers for Sportster 

and FX Models with Electric 

Start 

Complete with cell viewing window. Fit all 

FX 4-speed electric start models from 73-86 

(except Softail models) and all Sportster 


12296 Chrome plain battery cover 

688077 Black plain battery cover 

26375 Chrome louvered battery cover 

26506 24K gold wing emblem 

Battery Cover and Tray Kits 

Available in two different configurations. 

We offer kits with covers only which 

include the side and top covers including 

the hold down strap, or with both covers, 

the strap and the tray. 

Kit With Cover 

91298 Fits 73-86 4-speed FX models 

(except FX Softail models) 

Kit With Cover and Tray 

91297 Fits 73-86 4-speed FX models 

(except FX Softail models) 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 








TOOLS & 

EQUIPMENT 

6.87

15204 

12269 

6 

Stainless Steel Battery Hold- 

Down Straps 

18-gauge stainless steel with stainless eye 

bolts and nuts. 

25029 Fits FL models from 70-84 (repl. 

OEM 66383-70T) 

25028 Fits electric start Sportster models 

from 67-78 (repl. OEM 66470-67) 

25030 Fits FX and Sportster models with 

kickstart only from 70-78 (repl. 

OEM 66470-70T) 

25031 Fits electric start 4-speed FX models 

(except Softail models) from 

73-86 and all Sportster models 

from 82-97 (repl. OEM 66476- 

73T) 


(repl. OEM 66476-98) 

Battery Cushions 

High-quality pure neoprene closed-cell 

foam rubber. Includes a 4" x 6 1/2" pad 

for the battery tray, and two 2" x 1" 

pads for the top cover. 

Includes a 5 3/16" x 8" pad for the battery 

tray, and three 2" x 1" pads for the top 

cover. 


(repl. OEM 66210-85B) 


12268 

Oil Tank, Battery and Fender 

Accessories 

12265 Tall 6-volt hold-down rods (repl. 

OEMs 66390-58, 66393-58) 

12269 Battery top plate (repl. OEM 

66373-54TA) 

12268 Battery bottom plate (repl. OEM 

62575-36) 

15204 Battery plate bracket (repl. OEM 

62585-36) 

26085 

26088 

26086 

Chrome Battery Top Covers 

26085 Fits 4-speed FL models from 65-84 

CHROME 




from 82-96 CHROME 




from 82-96 BLACK 

26088 Fits electric start Sportster models 

from 67-78 CHROME26085 

Chrome Battery Carrier Trays 

Replacement chrome battery carriers 

Include battery pad, rubber mounting 

studs, brackets and all required mounting 

hardware. 

26479 Fits electric start FX models from 

73-78 (repl. OEM 66191-73) 

6.88

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

YCX1.5 Smart Battery Charger 

• Fully automated 7-step charge and maintenance process refined by GS Yuasa engineers for unrivaled battery care 

• Charges batteries faster than comparable models thanks to higher performance 

• Engineered with GS Yuasa‘s world-leading battery manufacturing expertise to extend life, maintain performance and ensure 

ultimate reliability 

• Optimum charging performance for conventional lead-acid, AGM, lithium and gel batteries 

• Charge and charge retention for motorcycle and powersport batteries (6 V and 12 V). charging from 2Ah to 30Ah; Trickle charge 

up to 120 Ah 

• Automatic battery diagnosis with patented rejuvenation phase to stop the sulphation process 

• Detection and reporting of all charging errors caused by battery problems 

• Automatic trickle charge with energy-saving eco mode maintains the optimal state of charge during storage of the battery 

• Rugged, integral clamp and spade terminals attach permanently for plug-and-play connection 

• Compact format with interchangeable sockets for use in Europe, UK and USA 

• Enhanced safety features with short circuit, overcharge and reverse polarity protection provide ultimate reliability 

• Easy to use thanks to simple navigation buttons and meaningful indicator LEDs 

Part#: 924932, Field of Application: For all AGM, Sealed Maintenance Free, GEL, Lithium and Lead Acid Batteries, Color: 

Black, Unit: Each, Qty.: 1 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

YCX6 Smart Battery Charger 

• The fully automatic nine-stage charging and charge retention process, refined by GS Yuasa engineers, ensures maximum battery 

protection 

• Engineered with GS Yuasa‘s world-leading battery manufacturing expertise to extend life, maintain performance and ensure 

ultimate reliability 

• Charger designed for commercial use, popular and tried and tested by workshops and technicians 

• Active cooling ensures stable power delivery and extends the life of the charger 

• Self-activating float mode maintains optimal state of charge during battery storage 

• Faster charging thanks to higher output power than comparable models 

• Optimum charging performance for conventional lead-acid, start-stop, EFB, AGM, lithium and gel batteries 

• Charging and charge retention of 12V batteries (even from the fully discharged state). Charging up to 120 Ah and trickle charging 

up to 180 Ah 

• Automatic battery diagnosis with patented rejuvenation phase to stop the sulphation process 

• Detection and reporting of all charging errors caused by battery problems 

• One charger for multiple uses: thanks to the adjustable output power, an unrivaled range of battery capacities is covered 

• Automatic trickle charge with energy-saving eco mode maintains the optimal state of charge during storage of the battery 

• Enhanced safety features with short circuit, overcharge and reverse polarity protection provide ultimate reliability 

• Durable, splash-proof (IP44) construction with robust, integrated clamp and spade terminals 

• Easy to use thanks to simple navigation buttons and meaningful indicator LEDs 

Part#: 924933, Field of Application: For all AGM, Sealed Maintenance Free, GEL, Lithium and Lead Acid Batteries, Color: 

Black, Unit: Each, Qty.: 1 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.89

6 

CH-26000 Battery Charger 

• Switchable for Lead-acid / AGM / Gel / 

Lithium batteies 

• Output: 6V, 12V or 24V switchable 

• Operating voltage: 200V-250V/AC50HZ 

• Charging current: 6V - Auto/8A/24A ; 

12V - 4A/12A/26A ; 24V - 2A/6A/13A 

• LCD Display 

• USB ports DC 5V 

• Winter mode 

• Repair function 

• Automatic lithium BMS unlock 

• Provide protection against: over 

temperatur, short circuit, overload, 

high voltage, low voltage, reverse 

connection, lithium battery BMS unlock 

Part#: 921666, Description: 26A, Unit: 

Each, Qty.: 1 




• Output: 6V, 12V or 24V switchable 


• Charging current: 6V - 4A/8A/15A ; 12V - 

4A/8A/15A ; 24V - 2A/4A/8A 

• LCD Display 







Part#: 921665, Description: 

15A, Unit: Each, Qty.: 1 




• Output: 12V or 6V switchable 


• Charging current: 1A-6V / 1A-12V 






Part#: 921663, Description: 1A, Unit: 

Each, Qty.: 1 






• Charging current: 3.5A-6V / 3.5A-12V 







Part#: 921664, Description: 3,5A, Unit: 

Each, Qty.: 1 

Optimate 3 Battery Charger 

OptiMate 3 is the most trusted fully sealed 

battery saving charger and maintainer 

– The most popular motorcycle charger 

world-wide! Fully automatic multi-step 

program brings the battery safely to 

full charge. The all-in-one tool for 12V 

battery care at home. Diagnoses, recovers, 

charges, tests and optimally maintains, 

automatically. No risk of overcharging. 

Totally safe for vehicle electronics. Sparks 

suppressed. Safe for long-term battery 

maintenance. Automatic shut-down if 

short-circuited or battery disconnected. 

7 Step fully automatic operation (low volt 

(from2V) start, desulfate safe, pulse safe, 

controlled charge, optimize, test after 

charge, Optimate maintenance). 

• For AGM, GEL, STD 12V batteries from 

2.5 – 38Ah 

• 0.8A (constant current) charging amps 

• Nominal: 12V range: 2V - 14.4V 

charging volts 

• Fully automatic operation 

• Indoor / Outdoor use (lowest 

temperature: -40°F / -40°C). 

• Weatherproof case with wall mount 

• Low Volt Start of 2V + 2 step 

desulphation recovery 

• Including weatherproof battery lead 

(SAE) and battery clip set 

Part#: 653138 , Field of Application: 

For all AGM, Sealed Maintenance 

Free, GEL, and Lead Acid Batteries , 

Unit: Each , Qty.: 1 

OptiMate Lithium 4s 0.8A 

8-step 12.8V 0.8A sealed battery saving 

charger and maintainer. Ultimate 

protection for your high performance 

Lithium battery. Fully automatic multistep 

program brings the battery safely 

to full charge – Connect to the battery 

and OptiMate Lithium 4s 0.8A does the 

rest, no supervision required! For Li-Ion 

12.8V / 13.2V power sport battery types 

made with LiFePO4 / LFP technology. 

Maintains and protects LiFePO4 batteries. 

No risk of overcharging. Totally safe for 

vehicle electronics. Sparks suppressed. 

Safe for long-term battery maintenance. 

Automatic shut-down if short-circuited or 

battery disconnected. 

8 Step fully automatic operation (low volt 

(0.5V) start, low volt safe, safe - monitor 

cells, test - cell damage, cell-balancing 

charge, optimize, test after charge, 

Optimate 365 maintenance). 

• For Lithium (LiFePO4) 12.8/13.2V 

batteries from 1 – 10Ah 

• 0.8A (constant current) charging 

• Nominal: 12.8V range: 0.5V - 14.4V 

charging volts 

• Fully automatic operation 

• Indoor / Outdoor use (lowest 

temperature: -40°F / -40°C) 

• Weatherproof case with wall mounts 

• Low Volt Start of 0.5V + 3 step low volt 

save and test 

• Including weatherproof battery lead 

(SAE) and battery clip set 

Part#: 607677 , Field of Application: 

For all Lithium, AGM, Sealed 

Maintenance Free, GEL, and Lead Acid 

Batteries , Unit: Each , Qty.: 1 

6.90

APPAREL 

895143 

895140 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Battery Tender is a revolutionary 

charger that charges any 12 or 6-volt 

lead-acid or gel battery and keeps 

it at full charge forever, WITHOUT 

DAMAGING OR DESTROYING THE 

BATTERY! It is NOT a trickle charger. 

Just hook it to a battery and forget it. 

Comes with alligator clips and quick 

disconnect connections. 

895141 

LIGHTING 

ELECTRICAL 

EXHAUST 

Gauge LCD Battery Meter 

• QDC Plug 

895143 Gauge LCD Battery 

INTAKE 

LED. Battery Gauge 

Simple two-wire connection & a compact 

size (about 2” x 3/4” x 3/16”) make 

installation a breeze. Universal fitment 

designed for all 12 V charging systems. 

Fits: Universal Fitment for 12V Battery 

Charging Systems 

774219 Chrome (ea) 

774218 Black (ea) 

USB Port Charger 

• QDC Plug 

895144 USB Port Charger 

1,25Amp and 4Amp Dual 

Selectable Power Tender 


• Input voltage: 220 to 240Vac, 50/60Hz 

• Charger weight: 612,3 grams 

• Size: 17,2cm x 9,3cm x 4,9 cm 

• ISMTM Microcontroller constantly 

updates charge sequence for smooth 

transitions between charging steps 

• Spark proof 

• Short circuit protected 

• Reverse hook-up protection 

• Safety timer 

• Designed for AGM, Standard, Flooded 

and GEL batteries 

• Lithium (LiFeP04) - Switchable 

895140 1,25Amp Power Battery Tender 

895141 4Amp Power Battery Tender 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.91

6 

Junior 800, Selectable Lead 

Acid/Lithium 

• Output: 12 V @ 800 mA 

• Input voltage: 220 to 240 Vac, 50/60 Hz 

• Charger weight: 467 grams 

• Size: 8,3 cm x 5 cm x 3,5 cm 

• ISMTM Microcontroller constantly 

updates charge sequence for smooth 

transitions between charging steps 

• Spark proof 

• Short circuit protected 

• Reverse hook-up protection 

• Safety timer 

• Selectable for AGM, flooded and GEL or 

Lithium (LiFeP04) batteries 

895139 800 mamp Power Battery Tender 

Battery Tender Accessory Bag 

This bag will accommodate the Battery 

Tender Junior or the Battery Tender Plus 

including all connectors and accessories. 

2851017 Accessory bag 

5A Power Tender Series High 

Efficiency by Battery Tender 

The Battery Power Tender Plus High 

Efficiency is a 5 amp battery charger that 

will fully charge and maintain a battery 

at its proper storage voltage without 

the damaging effects caused by trickle 

chargers. 

• Short Circuit Protected 

• Reverse Polarity Protected 

• Safety timer: 72 hours 

• Dimensions: 3.99 W x 8.26 L x 2.34 H 

890449 Battery Charger, Power Battery 

Tender® Plus HI 12 V 5 A 

Lithium Battery Charger 

WP800 by Battery Tender 

• Input: 120 VAC @ 60 Hz 

• Designed to charge any 12 volt Lithium 

(LiFePO4) Battery 

• Spark Proof 

• Short Circuit Protected 

• Reverse Polarity Protected 

• Auto recovery mode for batteries with 

very low voltage 

• Weatherproof 

• Weighs only 1 Pound 

890547 Lithium battery charger WP800 

Battery Tender Waterproof 

Chargers 0,8A 

• Spark-proof, even when the leads are 

touched together 

• Reverse polarity protected – will 

not damage charger if hooked up 

incorrectly 

• Easy to install and use 

• Safe in all weather conditions 

• Will safely charge and maintain any size 

12-volt battery though 200 amp-hour 

capacity 

• Safe and easy to use on all lead acid 

batteries 

• Solid-state two color LED indicates start 

of charge 

Battery Tender Waterproof Chargers 

686744 For Europe 


2851015 Alligator clip-style quick connect 

harness (sold each) 

2851016 Black fused grommet-style quick 

connect harness (sold each) 

Battery Tender 12-Volt 4-Bank 

International Chargers 

The 4-Bank International battery tender 

charging station works anywhere in the 

world! Designed to fully charge a battery 

and maintain it at proper storage voltage 

without the damaging effects caused by 

trickle chargers. 

• Features 4 independent charging 

systems and 12 volts at 1.25 amps per 

station 

• Weighs less than 3 lbs.! 

• Operates anywhere in the world (100- 

240 VAC 50/60 Hz.) 

• Microprocessor controlled constant 

current charging 

• Reverse polarity protected 

• Complies to all International safety 

standards 

• Perfect for all AGM, sealed maintenance 

free and flooded batteries 

• Optional 25 ft. extension leads available 

Battery Tender 4-Bank Chargers 

686834 For Europe 

6.92

APPAREL 

SEATS & 

TOURING 

Stereo Accent 

Made from lightweight ABS. No tools or 

disassembly required for installation. 

605185 

918448 

FOOT 

CONTROLS 

Fits: ‘96-’13 Electra Glides, ‘06-’13 Street 

Glides & ‘09-’13 Trike 

773765 Chrome (ea) 

HAND 

CONTROLS 

605186 

LIGHTING 

Switch Panel Accent by 

Kuryakyn 

This trim places an attractive chrome 

frame around the ignition & the adjacent 

control switches. The smooth chrome 

surface is much easier to keep clean than 

the stock matte finish. Simple peel-&- 

stick installation requires no tools or 

disassembly. 

605184 Switch accent panel, fits 96-13 


Speaker Grills by Kuryakyn 

Crank it up! While you’re enjoying great 

travelin’ tunes, add some visual punch to 

your speakers. With these trick grills, your 

speakers will look as good as they sound! 

For all Electra and Street Glides. Sold in 

pairs. 

605185 Zombie speaker grills, fits 96-13 

Touring/Trike 

605186 Flame speaker grills, fits 96-13 

Touring/Trike 

918449 

Plug-n-Play Complete Wiring 

Installation Kit with Quick 

Connector for Detachable Tour 

Pack 

Everything you need to connect the 

wiring on your detachable OEM or aftermarket 

tour pack! Allows for a plug-nplay 

wiring harness with quick-disconnect 

feature for easy removal. 


ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 


Rear Speaker Accents 

Look great by themselves but are also 

required to install matching Speaker Grills 

to your rear speakers. Installs over stock 

black rear speaker rings. Includes polished 

stainless hardware. 

Fits: ‘98-’13 FLHTCU/I, ‘10-’13 FLHTK, 

‘08-’11 FLHTCUSE, ‘11-’13 FLTRU & ‘09-’13 

FLHTCUTG 

773792 Rear Speaker Accents (pr) 

Note: Will also fit ‘98-’13 FLHTC if equipped with Accessory 

Rear Speaker Kit. 

OEM Delphi Tour Pack Light 

Bar Connector 

OEM Tour-Pack Light Bar Connector Kit, 

includes terminals, wire seals, and TPA 

lock. 

• 5-position connector 

• OEM# 69200225 

Part#: 918470, Fitment: 14-23 Touring, 

14-23 Trike, Fitment Note: For models, 

equipped with OEM tour pak, OEM #: 

69200225, Unit: Kit, Qty.: 1 

Complete Wiring Installation 

Kit for Retrofitting Tour Packs 

Complete Tour Pack Wiring Installation 

Kit for Retrofitting a 2014-Up tour pack 

to 2010-2013 Street & Road Glide Models. 

Everything you need to connect the 

wiring on your OEM or after-market tour 

pack light! Allows for a plug-n-play wiring 

harness with quick-disconnect feature for 

easy removal. 

• Kit includes everything you need to 

wire up an OEM 2014-Up King Tour 

Pack onto 2010-2013 Street & Road 

Glide Models. 


PART# 

FITMENT 

918451 09 FLTRSE3, 10 FLHXSE, 11 

FLHXSE2, 12 FLHXSE3, 12 

FLTRXSE, 13 FLTRXSE2, 13 

FLTRXSE2 ANV 

918450 10-13 FLHX, 10, 13 FLTRX, 13 

FLTRU 

918448 14, 18-23 FLHX, 

14-18 FLHRC, 14 

FLHRSE, 15-18, 

20-21, 23 FLHXS, 

15-22 FLHXSE, 

15-23 FLTRXS, 

16-22 FLHR, 18 

FLHX ANV, 18 

FLHXS ANX, 18- 

23 FLTRX, 18-19, 

21-22 FLTRXSE, 

18-23 FLHRXS, 

19 FLXHS, 

20-21 FLHT, 

22-23 FLHXST, 

22 FLHX, 22-23 

FLTRXST, 22 FLH, 

23 FLHXANV 

918449 99-13 Touring, For Retrofitting 

except 09 a 2014-Up 

FLHTCUSE4, tour pack to FL 

09 FLTRSE3, 10 1999-2013 

FLHTCUSE5, 

10 FLHXSE, 

10-13 FLHX, 

10, 13 FLTRX, 

11 FLTRUSE, 

11 FLHXSE2, 

11 FLHTCUSE6, 

12 FLHTCUSE7, 

12 FLHXSE3, 

12 FLTRXSE, 13 

FLHRSE5, 13 

FLHTCUSE8, 13 

FLTRXSE2, 13 

FLTRXSE2 ANV, 

13 FLTRU 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.93

6 

Self Leveling Drink Cup Holder 

by RAM Mounts 

The perfect accessory for any vehicle 

including motorcycles, ATVs and Big Rigs. 

Easily installed and positioned to keep 

your favorite beverage within reach comes 

with a RAM can insulator. Take a corner, 

this holder is ready to ride. 

893924 RAM level cup drink holder 

with koozie 

Tough Claw Mount by RAM 

Mounts 

Consists of the small Tough-Claw base 

and universal X-Grip holder. The X-Grip 

holder has a clean and clever four leg 

design that sports great holding power 

without hiding your smart-phone behind 

foam pads and plastic. The X-Grip holder 

expands and contracts for perfect fit of 

most smart phones. This mount rotates 

360 degrees. 

893923 RAM Tough-Claw mount with 

universal X-Grip phone cradle 

U-Bolt Mount by RAM Mounts 

Consists of hardware for mounting to 

either brake/clutch reservoirs and rails that 

are 0.5” to 1.25” in diameter, short length 

double socket arm and universal X-Grip® 

cell phone cradle. 

893921 RAM combination brake/clutch 

reservoir U-Bolt mount with short 

arm and universal X-Grip cell/ 

iPhone cradle 

U-Bolt Handlebar Mount by 

RAM Mounts 

Consists of a zinc coated u-bolt base, 

standard size aluminum double socket 

arm and 1” diameter ball with custom 

GoPro Hero adapter. With a RAM 1” 

diameter patented rubber ball and socket 

system that has adjustment points at both 

ends of the double socket arm, absorbs 

shock and vibration. 

893922 RAM handlebar mount, zinc coated 

U-bolt & 1” ball with custom 

GoPro Hero adapter 

893915 

893914 

Rail U-Bolt Mount by RAM 

Mounts 

This mount consists of a zinc coated u-bolt 

base, double socket arm and universal 

X-Grip cradle. Included in this package 

is hardware that will accommodate rails 

from 0.50” to 1.25” in diameter. 

893919 RAM rail U-Bolt mount universal 

with X-Grip 

Torque Handlebar Mount by 

RAM Mounts 

The new RAM Torque handlebar and rail 

mounting base. We’ve paired a B-sized 1” 

rubber ball base that accommodates bars 

3/4” - 1” in diameter with the dynamic 

X-Grip for phones. Sizing inserts are 

included to provide a snug fit and offer 

additional protection for the rail. 

893920 RAM bar mount 3/4”-1”ø short 

with X-Grip 

Phablet X-Grip Mounts by 

RAM Mounts 

The RAM-X-Grip for Phones/Phablets has 

a clean and clever four leg design that 

provides great holding power without 

hiding your phone or mobile device 

behind foam pads and plastic. 

Cradle Dimensions 

• Min width = 1.75“ (max height = 5.5“) 

• Max width = 4.5“ (min height = 3.25“) 

893915 Universal X-Grip large phone/ 

phablet cradle 

Cell Phone Mounts 

Cradle Dimensions 

• Min width = 1.875” (max height = 

4.25”) 

• Max width = 3.25” (min height = 2.25”) 

893914 Universal X-Grip cell/iPhone cradle 

Handlebar/Rail Mount by RAM 

Mounts 

This mount consists of a zinc coated u-bolt 

base, double socket arm and universal 

X-Grip cradle. Included in this package 

is hardware that will accommodate rails 

from 0.50” to 1.25” in diameter. 

893917 RAM handlebar rail mount with 

zinc coated U-Bolt base and universal 

X-Grip cell/iPhone cradle 

GoPro Hero Adapter by RAM 

Mounts 

Here we offer a sleek new adapter that 

will bring two revolutionary product 

lines together and open up a world of 

possibilities. While the GoPro line of 

mounting accessories is nothing to scoff 

at. 

893916 RAM custom GoPro Hero adapter 

with 1” rubber ball 

6.94

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Mirror Post Base by RAM 

Mounts 

Fits most H-D Touring models 08-. 

893913 RAM Mount mirror post base 

with 1” rubber ball for Harley 

Davidson motorcycles 

Torque Handlebar/Rail Mount 

by RAM Mounts 

The new RAM Torque handlebar and rail 

mounting base. We’ve paired a B-sized 1” 

rubber ball base that accommodates bars 

3/4” - 1” in diameter with the dynamic 

X-Grip for phones. With a RAM 1” 

diameter patented rubber ball and socket 

system that has adjustment points at both 

ends of the double socket arm. 

893918 RAM Torque 3/4” - 1” ø handlebar/rail 

base with 1” ball, medium 

arm and X-Grip for phones 

Combination Base by RAM 

Mounts 

The RAM combination handlebar and 

brake/clutch reservoir base provides 

the ultimate flexibility for mounting to 

your motorcycle. Mount to either your 

handlebar or brake/clutch.. 

893912 RAM motorcycle combination 

base for handlebar or brake/ 

clutch reservoir with 1” ball 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

Double Socket Arm by RAM 

Mounts 

These clamps provide a socket at both 

ends that accommodates 1” ball bases. A 

single spring inside the arm opens the end 

sockets, allowing you to pivot the ball and 

socket connection. 

893905 RAM Rail Base 

ENGINE 

GASKETS 

893910 

893908 

TRANNY & 

CLUTCH 

Clutch/Brake Reservoir Base 

Mount by RAM Mounts 

This mount connects to your handlebar 

clutch/brake clamp, left or right side, and 

holds one 1” diameter mounting ball. The 

chrome base fits the control clamps on your 

motorcycle with 40mm x 6mm stainless steel 

hardware, provided in the kit. 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

893909 

893907 

893911 Chrome motorcycle brake/clutch 

reservoir base with 1” ball 

FRAMES 

Double Socket Arm by RAM 

Mounts 

These clamps provide a socket at both 

ends that accommodates 1” ball bases. A 

single spring inside the arm opens the end 

sockets, allowing you to pivot the ball and 

socket connection. 

Chrome 

893910 Middle 90 mm 

893909 Short 60 mm 

Black 

893908 Middle 90 mm 

893907 Short 60 mm 

Torque Mounting Base by RAM 

Mounts 

The RAM Torque handlebar and rail 

mounting base has a 1” rubber ball and 

accommodates bars ” to 1” in diameter. 

Sizing inserts are included to provide a 

snug fit and protection of the rail. 

893906 1” diameter handlebar/rail base 

with 1” ball 


Free-Flex Cup and Phone 

Holder 

Don’t be forced to choose between your 

drink and your device. While other phone 

mounts kick your beverage to the curb, 

the Free-Flex Device and Cup Holder lets 

you sync AND drink! Made in the U.S.A., 

this sleek and versatile mount fits inside 

virtually any standard car, truck, SUV or 

UTV cup holder. The innovative design 

leverages tension caused by the durable 

nylon “flexing” out from within the cup 

holder, forming an extremely secure base 

that keeps the cup holder’s intended use 

intact. Flexible extended arms create the 

perfect perch that accommodates a wide 

variety of phone sizes and cases, so you 

can keep your hands free and focus on 

the road. 

Part#: 776474 , Color: Black , Material: 

ABS , Unit: Each , Qty.: 1 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

6.95

6 

USB Type-A Power Supply for Handlebar 

Mount 

• Input: DC 12V 

• The USB port becomes 5V2.4A output, and the tablet terminal 

can be charged 

• A convenient product that can charge a battery such as a 

smartphone 

• You can choose the mounting method according to usage 

situation 

• Even sudden rain with the book cap covering the power 

supply inlet is safe 

Part#: 923952, Color: Black, Unit: Set, Qty.: 1 

Slim-Mount Two-Port USB Type-A Power 

Supply 

USB power socket with two ports and a slim size with a thickness 

of 13.5 mm and a clean appearance. 

Handle clamps are compatible with 22.2 and 25.4 mm and can be 

mounted on a wide range of vehicles. 

• USB 2 port (MAX 5V4.8A) 

• Input voltage: DC12V 

• Input voltage range: DC10V-16V 

• Stand-by current (when not used): 6 mA 

• Output voltage: 4.8-5.2 V 

• Output rated current: 2.4A (1 port) 

• Output rated efficiency: 12W (1 port) / 24W (2 ports total) 

Part#: 918594, Color: Black, Unit: Each, Qty.: 1 

L-Shaped USB Cable 

• L-shaped 

• Wire length 200mm 

• 18W(5V/3A, 9V/2A, 12V/1.5A) 

Color: Black, Unit: Each, Qty.: 1 

PART# 

DESCRIPTION 

923953 USB Connector Type C to Type C 

923954 USB Connector Type C to Lightning 

923955 USB Connector Type A to Type C 

923956 USB Connector Type A to Lightning 

Slim-Mount One-Port USB Type-C Power Supply 

in Aluminium Case 

• Aluminum housing 

• For USB PD(Power Delivery) 

• Input DC12V 

• Output 5V/3A, 9V/2A, 12V/1.5A 

• Max. 18W 

• For 22,2/25,4mm handlebars (22,2mm adapter included) 

• Powers on with ignition key 

• Water-resistant when closed 

• CE approved 

Part#: 925202, Color: Black, Certification: ECE-Approved, 


USB Type-C Power Supply for Handlebar Mount 

• Type-C for USB PD (Power Delivery) 

• Work with main switch 

• Input DC12V 

• Output 5V/3A, 9V/2A, 12V/1.5A 

• Max. 18W 

• Including mini mounting stay 

Part#: 923951, Color: Black, Unit: Set, Qty.: 1 

6.96

889721 

889711 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

889720 

HAND 

CONTROLS 

891960 

889720 

Eklipes Bike-To-Bike Jr. Jump- 

Start Harness 

Jump start one vehicle from another by 

simply plugging this cable directly into 

your 2000 Amp EZ Jump-Start Battery 

Harness. 

LIGHTING 

ELECTRICAL 

• Jump-start extension cable 

• Battery terminal alligator clips 

889715 Eklipes Bike-To-Bike Jr. jump start 

kitç 

EXHAUST 

INTAKE 

Eklipes Viper smartphone and 

GPS adapter socket 

• Fits Viper handlebar brackets (above) 

• Smartphone or GPS power socket 

• # 889720 includes 2000 A EZ Jumpstart 

12 V battery harness 


ENGINE 

GASKETS 

Cell Phone Mount for 

Handlebars 

• Securely fits any phone up to 3-1/4“ x 

7“ 

• Durable Flex ball joint allows 360° 

rotation and flexibility 

• Design with quick-fasten technology for 

easy on-the-fly mounting and removal 

• Fits 7/8“, 1“ and 1-1/4“ handlebars 

891960 Cell phone mount 

889721 BlackEklipes Viper Adjustable 

Dual Ring Handle Bar Bracket 

• Fits all industry-standard 1 inch 12 V 

power sockets 

• Handle bar mount bracket ONLY 

• 1 ”, 1” and 7/8” insert rings, chrome or 

black 

889711 Eklipes Viper, black 

Eklipes Bike-To-Bike Jump- 

Start Harness 

• Jump-start extension cable 

• Battery terminal alligator clips 

• Includes Eklipes EZ jump-start harness 

889716 Eklipes Bike-To-Bike jump start 

kit including EZ jump-start harness 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Duo USB Smart Charger with 

Battery Voltage Display 

• Automatically adjusts current to avoid 

overcharging devices 

• Digital voltage display reads the output 

of vehicle battery 

• LED in USB ports 

891961 Duo USB Smart charger 

Eklipes EZ Jump-Start Harness 

Jump starting between any two Power 

Sports Vehicles. 

• 2 ft (approx. 65 cm) long harnes 

• Handles up to 2000 cranking amps 

• 15 A fuse 

• Waterproof caps 

889714 Eklipes EZ jump-start harness 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


6.97

NAMZ Universal Cigarette Lighter to USB 

Charger Adapter 


6 

NAMZ “On Board” Power Port with Dust Cover 

670882 For 94-13 Touring, 09-13 Trike 

77896 77897 

USB Power Source 

Charging your device just got even easier. Featuring two USB 

ports (bottom 1.0A & top 2.1A) to provide enough output for 

charging any modern device including iPads. Mount anywhere 

you choose including inside your tour pack, on the dash, or on 

your handlebars. 

Fits: Universal for 12V Applications - Requires 1” x 1” flat surface 

or 1” of straight section on 1” bar for mounting (Connects 

directly to battery with in-line fuse) 

771688 USB Power Source (ea) 

Hidden Antenna for Touring Models 

Mount it anywhere, in virtually any vehicle (UTV, boat, RV 

or motorcycle), and in any position! Kuryakyn‘s flexible and 

discreet Hidden Antennas can be tucked away virtually anywhere 

for a clean look while enjoying all the benefits of AM/FM/ 

Weatherband radio! 

• Antennas are 11“ long with 2“ of cable 

• Requires no power wire; simple plug-in installation 

• Offered with universal round antenna connector, or with 

Harley-Davidson-specific connector for 2014-newer models 

• Provides AM/FM & Weatherband signal (no CB radio 

capabilities) 


771423 

PART# FITMENT FITMENT NOTE DESCRIPTION 

77896 80-84 FL Shovel, Only for Models 

86-13 Touring, 15- with Factory 

23 Indian Bagger, Stereo 

except 16-21, 23 

Springfield, 18-21, 

23 Springfield 

Dark Horse, 22 

Springfield, 22 

Springfield Dark 

Horse, 15-23 

Indian Touring 

77897 14-23 Touring, 

14-23 FLHTCUTG, 

18 FLHTCUTG 

ANV, 20-22 

FLHTCUTGSE, 23 

FLTRT 

Only for Models 

with HD Factory 

Sound System 

With Universal 

Connector 

With Plug and 

Play Connector 

for 14-22 H-D 

771483 

Electrical Power Point 

Keep your cell phone, iPod, GPS, air pump or any other electrical 

device charged while on the road. Comes with everything you 

need to connect directly to your battery with a quick disconnect. 

771423 1” Bars (ea) 

771476 1-1/4” Bars (ea) 

771483 All 82-84 FL Shovel, 82-84 FX Shovel, 85-94 FX Model, 

82-20 Sportster, 91-17 Dyna, 84-23 Softail, 85-23 Touring, 

09-23 Trike, 02-17 V-Rod, 15-23 Indian Bagger, 12-23 

Indian Cruiser, 15-23 Indian Touring, 15-23 Indian Scout 

6.98

Section 06 Custom Chrome Europe Catalog 2024

Create successful ePaper yourself

Delete template?

Save as template?