oScilloScopES - LeCroy

Test & Measurement 

Line Card

NEW! HD4096 HigH DEfiNitioN tEcHNology 

High Signal 

to Noise Input 

Amplifiers 

Low Noise 

System 

Architecture 

High Sample 

Rate 12-bit 

ADC’s 

HD4096 high definition technology consists of 

high sample rate 12-bit ADcs, high signal-to-noise 

ratio amplifiers and a low-noise system architecture. 

this technology enables high definition 

oscilloscopes to capture and display signals of 

up to 1 gHz with high sample rate and 16 times 

more resolution than other oscilloscopes. 

Oscilloscopes with HD4096 technology have higher resolution 

and measurement precision than 8-bit alternatives. The high 

sample rate 12-bit ADCs provide high resolution sampling at 

up to 2.5 GS/s. The high performance input amplifiers deliver 

phenomenal signal fidelity with a 55 dB signal-to-noise ratio 

and provide a pristine signal to the ADC to be digitized. The 

low-noise signal architecture ensures that nothing interferes 

with the captured signal and the oscilloscope displays a 

waveform that accurately represents the signals from the 

device under test. 

16x More Resolution 

12-bits of vertical resolution provides sixteen times more resolution than 8-bits. The 4096 discrete 

levels reduce the quantization error. Signals captured with lower resolution oscilloscopes have a higher 

level of quantization error resulting in less accurate waveforms on the display. Signals captured on an 

oscilloscope with 12-bit HD4096 technology are accurately displayed with minimal quantization error. 

2 

16x Closer to Perfect 

8-bit 12-bit 

Quantization Error 

Digitized Waveform 

Signal from 

Device Under test

HigH DEfiNitioN oScilloScopES 

oscilloscopes with HD4096 have a variety of benefits that 

allow the user to debug in high definition. Waveforms 

displayed by high definition oscilloscopes are cleaner and 

crisper. More signal details can be seen and measured; these 

measurements are made with unmatched precision resulting 

in better test results and shorter debug time. 

8-bit 12-bit 

A A 

B c 

B 

A Clean, Crisp Waveforms | Thin traces show the actual waveform with minimal noise interference 

B More Signal Details | Waveform details lost on an 8-bit oscilloscope can now be clearly seen 

c Unmatched Measurement Precision | Measurements are more precise and not affected by quantization noise 

16x More Resolution 

16x Closer to Perfect 

Who’sdoin‘that? teledynelecroy.com/hd4096 

product Highlights 

• 12-bit ADc Resolution, 15-bit with ERES 

• HD4096 technology 

• 200 MHz, 350 MHz, 500 MHz, 1 gHz Bandwidth 

• long Memory up to 250 Mpts 

• 12.1" Multi-touchscreen 

• 25 Serial Data trigger/Decode Solutions 

• Standard Spectrum Analyzer package (HDo 6000) 

• Very powerful new powerMeasure option 

c 

3

4 

oScilloScopES 

labMaster 10 Zi-A labMaster 9 Zi-A WaveExpert 100H 

WaveMaster 8 Zi-A 

(SDA/DDA 8 Zi-A) 

Bandwidth 13 GHz to 65 GHz 13 GHz to 45 GHz 20 GHz to 100 GHz 4 GHz to 45 GHz 

Bandwidth 

Upgradeable 

Yes Yes Yes Yes 

Standard 

20 Mpts/Ch 20 Mpts/Ch 4 Mpts 20 Mpts/Ch 

Memory 

32 Mpts (interleaved) 

Max. Memory 256 Mpts/Ch 768 Mpts/Ch 510 Mpts 768 Mpts/Ch 

Rise time 5.6 ps to 32.5 ps 8 ps to 32.5 ps 18 ps to 1 ps 8 ps to 95 ps 

channels Up to 80 Up to 80 4 4 

Max Sampling 

Rate2 160 GS/s 120 GS/s 10 Ms/s 120 GS/s 

Display 

trigger types 

Serial trigger 

and Decode 

options 

Applications 

Software 

options 

Mixed Signal 

options 

connectivity 

and Storage 

1 Optional 

15.3" WXGA 

Color Touch Screen 

Edge, Width, Glitch, 

Pattern, Video, HDTV, 

Runt, Slew Rate, 

Interval (Period), 

Dropout, Qualified, 

Cascade (Sequence) 

Trigger, High-speed 

Serial Protocol Trigger 1 

I 2 C, SPI, UART, RS-232, 

CAN, LIN, FlexRay, SENT, 

Audio, ARINC 429, 

MIL-STD-1553, D-PHY, DigRF 

3G, DigRF v4, USB 1.0/1.1/2.0, 

USB 2.0-HSIC, 

Vehicle Bus Analyzer 

Package 

USB 3.0, SAS2, SATA, 

PCI Express, HDMI, DisplayPort, 

XAUI, FB-DIMM, InfiniBand, 

Fibre Channel, Ethernet, MIPI, 

DDR, UWB, Spectrum Analysis, 

EMC, Optical Recording, Jitter & 

Timing, Digital Filter, Advanced 

Customization, Disk Drive 

Measurement, Cable 

De-embedding, 8b/10b 

Decode, Serial Data Mask 

USB2-HSIC, Ethernet 10G, 

64b/66b, MOST150o, MOST 

50e, BroadR-Reach, SENT 

250 MHz or 500 MHz 

18 Ch or 36 Ch 

USB Host for Storage 

LAN for PC 

LXI for PC 

GPIB for PC 1 

15.3" WXGA 











CAN, LIN, FlexRay, 



3G, DigRF v4, USB 1.0/1.1/2.0, 

USB 2.0-HSIC, 

Vehicle Bus Analyzer 

Package 

USB 3.0, SAS2, SATA, PCI 

Express, HDMI, DisplayPort, 




EMC, Optical Recording, 

Jitter & Timing, Digital Filter, 

Advanced Customization, Disk 

Drive Measurement, Cable Deembedding, 

8b/10b Decode, Serial 

Data Mask USB2-HSIC, Ethernet 

10G, 64b/66b, 10GBaseKR, 

Multi-lane Serial Data Analysis, 

MOST150o, MOST 50e, BroadR- 

Reach SENT 




LAN for PC 

LXI for PC 

GPIB for PC 1 

10.4" SVGA 


15.3" WXGA 


Sequential and CIS Edge, Width, Glitch, 








N/A I 2 C, SPI, UART, RS-232, 




3G, DigRF v4, USB 1.0/1.1/2.0, 

USB 2.0-HSIC, Vehicle Bus 

Analyzer Package 

TDR, S-parameter, 

Eye Diagram Analysis, 

Jitter Measurement, 

Virtual Probing, 

Equalizer Emulation 

USB 3.0, SAS2, SATA, PCI 

Express, HDMI, DisplayPort, 




EMC, Optical Recording, 

Jitter & Timing, Digital Filter, 

Advanced Customization, Disk 

Drive Measurement, Cable Deembedding, 

8b/10b Decode, Serial 

Data Mask USB2-HSIC, Ethernet 

10G, 64b/66b, MOST150o, Multilane 

Serial Data Analysis, MOST 

50e, BroadR-Reach SENT 

N/A 250 MHz or 500 MHz 



LAN for PC 

GPIB for PC 1 


LAN for PC 

LXI for PC 

GPIB for PC 1

Wavepro 7 Zi-A 

(SDA/DDA 7 Zi-A) 

WaveRunner 6 Zi 

(8-bit and 12-bit) 

HDo 6000 

Bandwidth 1.5 GHz to 6 GHz 400 MHz to 4 GHz 350 MHz to 1 GHz (12-bit) 

Bandwidth 

Upgradeable 

Standard 

Memory 

Yes N/A N/A 

20 Mpts/Ch 16 Mpts/Ch 


Max. Memory 256 Mpts/Ch 64 Mpts/Ch 


25 Mpts/Ch 


125 Mpts/Ch 


Rise time 70 ps to 235 ps 75 ps to 875 ps 75 ps to 875 ps 

channels 4 4 4 

Max Sampling 

Rate 2 

Display 15.3" WXGA 


trigger types Edge, Width, Glitch, 








Serial trigger 

and Decode 

options 

Applications 

Software 

options 

Mixed Signal 

options 

connectivity 

and Storage 

40 GS/s 40 GS/s 2.5 GS/s (12-bit) 




MIL-STD-1553, D-PHY, DigRF 3G, DigRF 

v4, USB 

Vehicle Bus Analyzer Package 

PCI Express, SATA, USB2.0, Ethernet, 

HDMI, MIPI, DDR, Spectrum Analysis, 

EMC, Optical Recording, Jitter & Timing, 

Digital Filter, Advanced Customization, 

Disk Drive Measurement, Demodulation, 

PowerMeasure, Cable De-embedding, 

USB2-HSIC, Ethernet 10G, 64b/66b, 

MOST150o, Multi-lane Serial Data Analysis, 

MOST 50e, BroadR-Reach SENT 




LAN for PC 

LXI for PC 

GPIB for PC 1 

12.1" WXGA 



Pattern, Video, 

HDTV, Runt, 

Slew Rate, 


Dropout, Qualified 





v4, USB 1.0/1.1/2.0, USB 2.0-HSIC, 


Jitter and Timing Analysis, Digital Filter, 

Disk Drive Measurement, PowerMeasure 

Analysis, Spectrum Analysis, Advanced 

Customization, Serial Data Mask, Ethernet, 

USB 2.0 Compliance Test, EMC Pulse 

Parameter, Electrical Telecom 

Mask Test, Statistics, 

Advanced Math, 


MOST150o, MOST 50e, BroadR-Reach 

SENT 




LAN for PC 

LXI for PC 

GPIB for PC 1 

1 Optional 2 Maximum sample rate is sometimes achieved via operating in 2-channel mode. 3 2 Ch models only. 

12.1" WXGA 



Pattern, Video, 

HDTV, Runt, 

Slew Rate, 




CAN, LIN, FlexRay, SENT, 



v4, USB 1.0/1.1/2.0, USB 2.0-HSIC, 


Jitter and Timing Analysis, Digital Filter, 

Disk Drive Measurement, PowerMeasure 

Analysis, Spectrum Analysis, Advanced 

Customization, Serial Data Mask, Ethernet, 

USB 2.0 Compliance Test, EMC Pulse 

Parameter, Electrical Telecom 

Mask Test, Statistics, 

Advanced Math, 


MOST150o, MOST 50e, BroadR-Reach 




LAN for PC 

LXI for PC 

GPIB for PC 1 

5

6 

oScilloScopES—Sold through distribution partners 

HDo4000 MSo MXs-B WaveSurfer MXs-B 

Bandwidth 200 MHz to 1 GHz 400 MHz to 1 GHz 200 MHz to 1 GHz 

Resolution 12-bit ADC resolution, 

15-bit with enhanced resolution 

8-bit ADC resolution, 




Rise time 1.75 ns to 350 ps 875 ps to 300 ps 1.75 ns to 300 ps 

channels 2, 4 4 + 18 4 

Display 12.1” Wide TFT-LCD 

Touch Screen 

Memory 12.5 Mpts/Ch 

5 Mpts Interleaved 

10.4" Color SVGA 

Touch Screen 

16 Mpts/Ch 


10.4" Color SVGA 

Touch Screen 

16 Mpts/Ch 


Sample Rate 2.5 GS/s 2.5 GS/s to 10 GS/s 2.5 GS/s to 10 GS/s 

MSo characteristics – 250 MHz, 1 GS/s – 

trigger types Edge, Width, Glitch, 


Runt, Slew Rate, Interval (Period), 


Serial trigger and 

Decode 1 

connectivity and 

Storage 

I2C, SPI, UART, 

RS-232, CAN, LIN, FlexRay, 

SENT, Audio, MIL-STD-1553, 

D-PHY, ARINC 429, 

DigRF 3G, DigRF v4, 

USB 1.0/1.1/2.0, USB 2.0-HSIC 


USB Device for PC 

LAN for PC 

GPIB for PC1 Math +, -, x, /, FFT, 

Absolute Value, Average, 

Derivative, Envelope, 

Enhanced Resolution, Floor, 

Integral, Invert, 

Reciprocal, Roof, 

Square, Square Root, Trend 

Dimensions (HWD) 291.7 x 399.4 x 131.31 mm 

(11.48”x 15.72”x 5.17“) 










USB 1.0/1.1/2.0, USB 2.0-HSIC 


LAN for PC 

GPIB for PC1 +, -, x, /, FFT, 






Square, Square Root 

260 x 340 x 152 mm 

(10.25" x 13.4" x 6") 










USB 1.0/1.1/2.0, USB 2.0-HSIC 


LAN for PC 

GPIB for PC1 +, -, x, /, FFT, 






Square, Square Root 

260 x 340 x 152 mm 

(10.25" x 13.4" x 6") 

Weight 5.71 kg (12.6 lbs) 7.26 kg (16.0 lbs) 7.26 kg (16.0 lbs) 

1 Optional 2 4 ch models only 3 2 ch models only

WaveJet 300A WaveAce 2000 WaveAce 1000 

Bandwidth 100 MHz to 500 MHz 70 MHz to 300 MHz 40 MHz to 100 MHz 

Resolution 8-bit ADC resolution, 






Rise time 3.5 ns to 750 ps 5.0 ns to 1.2 ns 8.8 ns to 3.5 ns 

channels 2, 4 2, 4 2 

Display 7.5" Color VGA 7” Color Wide VGA 7” Color Wide QVGA 

Memory 500 kpts/Ch 12 kpts/Ch 

24 kpts Interleaved 

1 Mpts/Ch 


Sample Rate 1 GS/s to 2 GS/s 1 GS/s to 2 GS/s 500 MS/s to 1 GS/s 

MSo characteristics – – – 

trigger types Edge, Width, Video, 


Pulse Count 

Serial trigger and 

Decode 1 

connectivity and 

Storage 

Edge, Width, Video, 

Slope, Alternate 

Edge, Width, Video, 

Slope, Alternate 

– – – 



LAN for PC 1 

GPIB for PC 1 



LAN for PC 



Math +, -, x, FFT +, -, x, /, FFT +, -, x, /, FFT 

Dimensions (HWD) 190 x 295 x 102 mm 

(7.5" x 11.2" x 4") 

163 x 360 x 124.1 mm 

(6.42” x 14.17” x 4.89”) 

163 x 313 x 115.8 mm 

(6.42” x 12.32” x 4.6”) 

Weight 3.2 kg (7.0 lbs) 3.33 kg (7.40 lbs) 2.78 kg (6.10 lbs) 

7

8 

HigHligHtED pRoDUctS 

LabMaster 10 Zi 

High Bandwidth 

Oscilloscopes 

65 GHz Maximum Real-Time Bandwidth 

n 4 channels @ 36 GHz per acquisition module 

n Bandwidth and channel upgrade flexibility 

n ChannelSync for precise synchronization of all acquisition modules 

n Server-class CPU (33.6 GHz effective clock rate, up to 192 GB RAM) 

n Lowest jitter noise floor (100 fsrms) and highest time base stability. 

n 14.1 Gb/s hardware serial trigger (28 Gb/s in development) 

LabMaster 10 Zi is perfect for developed and emerging 10-12 Gb/s technologies, such as 

40/100 GBASE-R Ethernet and SAS12, benefit from 80 GS/s on four (or more) channels at 

up to 36 GHz. Ultra-high speed technologies, such as CEI-25/28, CEI-56, and optical coherent 

modulation communication systems (DP-QPSK, 16-QAM, MIMO) benefit from the 

world’s fastest real-time bandwidth (65 GHz) .and four or more channels. 

Learn More: 

teledynelecroy.com/labmaster 

Signal Integrity Network Analyzer High-bandwidth, Multi-port S-parameter Measurements 

Teledyne LeCroy’s proprietary 

ChannelSync technology in the 

LabMaster 10 Zi oscilloscopes permits 

precise synchronization of up to twenty 

silicon-based 36 GHz / 80 GS/s channels 

and up to ten 60 GHz / 160 GS/s DBI 

channels—capability not offered by 

any other manufacturer. 

SpARQ 4, 8 and 12-port units, capable of characterizing crosstalk on multi-lane differential 

devices, are available for order. The 12-port SpARQ can simultaneously measure NEXT and FEXT 

crosstalk on up to 3 differential lanes, and is similar in price to a lesser-capable 4-port VNA. 

It is ideal for: 

n Development of measurement-based simulation models 

n Design validation 

n Compliance testing 

n High-performance TDR 

n PCB testing 

n Portable measurement requirement 

Try it Free—Download software here 

teledynelecroy.com/sparq

tESt & MEASUREMENt iNStRUMENtS 

WaveStation Waveform Generators Powerful Combination of Performance and Flexibility 

With 5 basic signal types, and over 40 built-in arbitrary waveforms the WaveStation 

is a versatile waveform generator. A variety of modulation schemes, intuitive waveform 

editing software and remote control capabilities, enable versatile waveform generation 

of waveforms up to 50 MHz. The 3.5” display and simple user interface make it easy 

to generate a wide range of waveforms. 

Logic Analyzer 16 Channels, 1 GS/s, 100 MHz Input plus I 2 C, SPI and UART Analysis 

$990 

Learn more: 

teledynelecroy.com/wavestation 

logicStudio 16 provides 16 channels with a high sample rate of 1 GS/s and maximum input of up 

to 100 MHz. The software provides a lively, dynamic waveform display with a smart, intuitive 

user-interface that is easily navigated by a few basic mouse clicks. logicStudio provides a lot of tools 

for digital debug including timing cursors, unique zooming and panning of waveforms, a persistence 

display and a history mode which can replay old data captures. Additionally, protocol analysis for I 2 C, 

SPI and UART is included to decode waveforms as they are captured and provide the ability to trigger 

on specific address or data packets on the bus. 

Try it Free—Download software here 

teledynelecroy.com/logicstudio 

PeRT 3 Test System Protocol-enabled Receiver and Transmitter Tolerance Tester 

The peRt 3 (Protocol-enabled Receiver and Transmitter Tolerance Tester) fills the space 

between physical layer test and protocol test, providing a new and more intelligent 

capability for performance testing of receivers and transmitters. Designed to meet 

the test needs of engineers working with serial data transceivers and other high-speed 

serial data communication systems, the Teledyne LeCroy peRt 3 Test System is not just a new 

instrument, it is an entirely new instrument class. 

LEARN MORE AT: 

teledynelecroy.com/pert3 

Arbitrary Waveform Generators High Resolution Generators for Analog and Digital Waveform Generation 

ArbStudio series of arbitrary waveform generators (AWG) generates signals up to 125 MHz with high 

sample rate, long memory and high resolution as well as a variety of operating modes, modulation 

capabilities and a digital pattern generator. The software interface that controls the hardware is 

designed to simplify waveform creation with an intuitive navigation tree which allows easy access to 

all channels along with special views for controlling basic function generator outputs as well as pulse 

width modulation (PWM) capabilities. 

LEARN MORE AT: 

teledynelecroy.com/arbstudio 

9

10 

pRotocol ANAlyZERS 

the following overview includes the most popular teledyne lecroy protocol analyzers. 

for more information please visit teledynelecroy.com/protocolanalyzer 

DDR4 

PCI Express ® 

Fibre Channel Over Ethernet (FCOE) 

Kibra 480 Analyzer 

1g � 2g � 4g � 8g � 16g � 

The Teledyne LeCroy Kibra 480 is a stand-alone protocol analyzer that provides comprehensive DDR3 and 

DDR4 JEDEC timing analysis. Sitting in-line on a live system, the analyzer uses a proprietary probe implementation 

to allow loss-less capture of high speed DDR transactions while automatically identifying timing and 

protocol violations. 

Summit T3-16 Analyzer 

2.5 gt/s � 5 gt/s � 8 gt/s � 

The Summit T3-16 is Teledyne LeCroy’s highest performance PCI Express protocol analyzer, and supports PCI 

Express 3.0; data rates of 2.5 GT/s, 5 GT/s and 8 GT/s; full data capture on bidirectional lane widths of x1, x2, 

x4, x8 and x16; and a full 8 GB of trace memory. The system offers advanced features such as performance 

monitoring, LTSSM, Dynamic equalization, NVM Express, SCSI Express, SATA Express decodes and much 

more. 

Summit Z3-16 Exerciser 

2.5 gt/s � 5 gt/s � 8 gt/s � 

The Summit Z3-16 is Teledyne LeCroy’s fourth generation protocol exerciser, with support for PCI Express at 

the Gen3 data rates of up to 8 GT/s. The Summit T3-16 Analyzer and Summit Z3-16 Exerciser provide a 

complete test and development system for engineers working on PCI Express 3.0 designs. 

Summit T3-8 Analyzer 

2.5 gt/s � 5 gt/s � 8 gt/s � 

The Summit T3-8 is a new protocol analyzer for the highest transfer speeds currently supported by the 

PCI Express specification, the PCI Express 3.0 protocol at data rates of 8 GT/s. The Summit T3-8 Protocol 

Analyzer provides the full, powerful feature set of the Summit T3-16 protocol analyzer but at close to half the 

physical size and at significantly lower cost. The Summit T3-8 protocol analyzer system can support lane widths 

up to x8 in a single configuration and also support up to x16 when combined together with another Summit 

T3-8 protocol analyzer. 

Summit T28 Analyzer 

2.5 gt/s � 5 gt/s � 

The Summit T28 is a new protocol analyzer that provides a powerful and extremely cost-effective solution for 

any applications requiring PCIe 2.0 speeds and functionality. The new compact Summit T28 Protocol Analyzer 

features a small chassis footprint while maintaining (for lane widths up to x8) the same data recording and 

analysis features found in the high-end Summit T3-16 protocol analyzer. The Summit T28 protocol analyzer 

supports PCIe ® data transmission rates up to 5 GT/s and data lane widths up to x8 in a single compact unit. 

SierraNet M408 

10g � 40g � 

The Teledyne LeCroy SierraNet is the most advanced integrated Ethernet protocol analyzer system available. 

Based on Teledyne LeCroy’s next generation platform, the SierraNet M408 provides 100% recording of all 

Ethernet traffic at full line rates on all ports, while maintaining the link integrity through custom-designed 

pass-through probe technology.

pRotocol ANAlyZERS 

Fibre Channel (FC) 

Universal Serial Bus (USB) 

SierraFC TM M164 Protocol Analysis System 

The SierraFC M164 system provides 16G Fibre Channel data capture and protocol verification for developers & protocol 

test engineers in storage networking and other Fibre Channel applications. Available with 4 recording channels, the 

SierraFC offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, 

large capture buffers, and standard support for Speed Negotiation and Forward Error Correction (FEC) enabled links. 

Serial Attached SCSI (SAS) and Serial ATA (SATA) 

Sierra M124 Protocol Verification System 

1.5g � 3g � 6g � 12g � 

The Sierra M124 SAS/SATA system supports data rates up to 12 Gb/s for SAS and 6 Gb/s for SATA; and provides 

a linear pass-through probing technology for true 12 Gb/s SAS support from link training, speed negotiation, to upper 

protocol layer analysis. The Sierra product family sets new standards for performance while incorporating a complete 

set of features in a single, economical system. 

Sierra M6-4 Protocol Verification System 

1.5g � 3g � 6g � 

The Sierra M6-4 SAS/SATA test solutions support data rates up to 6 Gb/s, and provide analysis, traffic generation, 

emulation, error injection, and compliance test capabilities in one flexible platform. The Sierra product family sets 

new standards for performance while incorporating a complete set of features in a single, economical system. 

Sierra M6-2 Protocol Verification System 

1.5g � 3g � 6g � 

The Sierra M6-2 system provides an economical alternative to the industry-leading Sierra M6-4 for customers 

that require only 1 or 2 SAS/SATA ports. While providing all of the traffic generation, emulation, error injection, and 

compliance test capabilities of the M6-4 the Sierra M6-2 delivers this in a more compact package with significant 

cost savings. 

Voyager M3i Protocol Verification System 

1.5M � 12M � 480M � 5g � 

The Voyager M3i is Teledyne LeCroy’s 6th generation USB protocol verification system designed for the next evolution of 

universal serial bus known as SuperSpeed USB. Leveraging Teledyne LeCroy’s extensive expertise in high-speed serial 

data analysis, the Voyager provides 100 % accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s. 

USB Advisor T3 Analyzer 

1.5M � 12M � 480M � 5g � 

The USB Advisor T3 protocol analyzer is an inexpensive, small form-factor, but full featured analysis system for those 

testing USB 3.0 and USB 2.0 devices. It captures, displays, and analyzes bus traffic using the CATC Trace display 

software. It automatically highlights protocol errors while displaying a chronological list of packets with full decoding 

of USB device classes. 

Mercury T2 

1.5M � 12M � 480M � 

The Mercury T2 is the industry’s smallest, most affordable hardware-based USB 2.0 protocol analyzer that combines 

the defacto standard CATC Trace display with powerful analysis features. The pocket-sized Mercury T2 is bus powered 

and is controlled using any Windows PC. With comprehensive triggering, the Mercury T2 provides much of the 

same lab quality protocol analysis capabilities offered in Teledyne LeCroy’s top-of-the-line USB analyzers. 

for additional products and other protocols supported, please see our website at teledynelecroy.com/protocolanalyzer 

11

pRoBES 

Wavelink ® Differential 

probes (4 gHz – 25 gHz) 

D610/D620, D410/D420, D600A- 

AT, D300A-AT, D500PT, D610-PT, 

D620-PT, D410-PT, D420-PT, 

D830, D830-PS, D1030, D1030- 

PS, D1330, D1330-PS, D1305-A, 

D1305-A-PS, D1605-A, D1605- 

A-PS, D2005-A, D2005-A-PS, 

D2505-A, D2505-A-PS 

Differential probes 

(200 MHz – 1.5 gHz) 

ZD1500, ZD1000, ZD500, ZD200 

ZS Series High impedance 

Active probes 

ZS2500, ZS1500, ZS1000, 

ZS2500-QUADPAK, 

ZS1500-QUADPAK, 

ZS1000-QUADPAK 

High Voltage 

Differential probes 

ADP305, ADP300, AP031 

current probes 

CP031, CP030, AP015, CP150, 

CP500, DCS015 

High Voltage 

passive probes 

PPE1.2KV, PPE20KV, PPE2KV, 

PPE4KV, PPE5KV, PPE6KV 

passive probes 

PP008-1, PP009-1, 

PP007-WR-1, PP007-WS-1, 

PP005A, PP006A, 

PP010-1, PP011-1, PP017-1, 

PP0018-1 

High performance 

Differential Amplifier 

DA1855A 

1-800-5-LeCroy 

teledynelecroy.com 

WaveLink ® probes provide industry leading technology for wideband signal connection 

to test instruments. The first differential probes to employ SiGe technology, they deliver 

full system bandwidth when used with WaveRunner, WavePro, WaveMaster, DDA, and 

SDA oscilloscopes up to 25 GHz. 

High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make 

these active differential probes ideal for applications such as automotive development 

(e.g. FlexRay) and failure analysis, as well as wireless and data communication design. 

The ProBus interface allows sensitivity, offset and common-mode range to be displayed 

on the oscilloscope screen. 

The ZS Series probes provide high impedance and an extensive set of probe tips and 

ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input 

resistance and low 0.9 pF input capacitance mean this probe is ideal for all frequencies. 

The ZS Series probes provide full system bandwidth for all Teledyne LeCroy oscilloscopes 

having bandwidths of 2 GHz and lower. 

Low cost active differential probes are intended for measuring higher voltages. The 

differential techniques employed permit measurements to be taken at two points in a 

circuit without reference to the ground, allowing the oscilloscope to be safely grounded 

without the use of opto-isolators or isolating transformers. 

Teledyne LeCroy current probes reach bandwidths of 100 MHz, peak currents of 700 A 

and sensitivities of 10 mA/div. Use multiple current probes to make measurements 

on three-phase systems or a single current probe with a voltage probe to make 

instantaneous power measurements. Teledyne LeCroy current probes enable the 

design and testing of switching power supplies, motor drives, electric vehicles, and 

uninterruptible power supplies. 

The PPE Series includes five fixed-attenuation probes covering a range from 2 kV to 

20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs 

up to 1.2 kV. All fixed-attenuation, standard probes automatically rescale compatible 

Teledyne LeCroy oscilloscopes for the appropriate attenuation of the probe. 

Teledyne LeCroy passive probes automatically scale the oscilloscope waveforms 

without user input. Passive probes are the ideal tool for low frequency signals since 

circuit loading at these frequencies is minimized. Passive probes are designed to handle 

voltages of at least 400 V, some as high as 600 V. 

The DA1855A is a stand-alone, high-performance differential amplifier providing the 

fastest overdrive recovery of any commercially available product. This unique capability 

allows the amplifier to make measurements that would normally be limited by 

oscilloscope overdrive recovery. 

© 2012 by Teledyne LeCroy. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. 

Product or brand names are trademarks or requested trademarks of their respective holders. 

PCI Express ® is a registered trademark and/or service mark of PCI-SIG. 

local sales offices are located throughout the world. 

Visit our website to find the most convenient location. 

PLC-9nov12

oScilloScopES - LeCroy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?