RU 22 PILOT UNIWERSALNY - emmerson

other buttons of the remote are operating
the corresponding functions of the device. If
the remote does not work, please check the
code and brand again and repeat
programming. If the remote still does not
work please try other codes listed from the
code list.
4. If there isn’t any code working with your
device, please try our Power Searching and
Fastest Searching.
Power Searching:
1. Turn on the equipment you want the remote to
control, and point the remote toward it.
2 .Press Device Key (e.g. TV, DVD) and release
3. Press and hold the [SET] Key until the LED turn
on.
4. Press [POWER] and release, LED goes off and
flashes every 3 seconds. It stands for entering
the Power Searching Mode. In Searching, you
could press [UP] or [DOWN] to change the
direction.
5. Press [OK] to save the code until the device is
powered off.
6. You can power on the device again by hand and
test whether the function keys are working, such
as CH+, CH-. If the function keys are not
working, repeat Step 1 to Step 5.
Note: When it is searching the code
automatically in step 4, you can press any key
to exit the power searching mode without
setting,