GUARDSENSE Wireless Through-Wall Audio - Winkelmann (UK)
GUARDSENSE Wireless Through-Wall Audio - Winkelmann (UK)
GUARDSENSE Wireless Through-Wall Audio - Winkelmann (UK)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
data sheet<br />
<strong>GUARDSENSE</strong><br />
<strong>Wireless</strong><br />
<strong>Through</strong>-<strong>Wall</strong><br />
<strong>Audio</strong><br />
Features<br />
+ Stand alone, field-ready system<br />
+ Digital-encrypted transmission using<br />
commercial open spectrum (2.4GHz)<br />
+ Uses up to 7 lightweight, weather-proof<br />
wireless microphone sensors<br />
+ High intelligibility listening through<br />
50cm concrete walls<br />
+ Handheld multichannel receiver with<br />
advanced DSP-based noise reduction<br />
+ Over 8 hours of continuous performance time<br />
+ Microphone & contact microphone operation<br />
+ Ruggedized case, inc. outdoor mounting kit<br />
1 2<br />
1. Contact Microphone Transmitter Sensor 2. Microphone Transmitter Sensor<br />
www.winkelmann.co.uk<br />
Applications<br />
A MATTER A MATTER OF NATIONAL OF NATIONAL SECURITY<br />
+ Listening through walls<br />
+ Structure-borne sound sensing<br />
+ Life saving, search and rescue operations<br />
+ Industrial and noisy environments<br />
+ Standard outdoor surveillance operations<br />
+ Homeland Security<br />
+ Suited for use in SWAT & tactical task forces
About the Guardsense<br />
GuardSense provides fire,<br />
police and special enforcement<br />
teams with handheld, digitallyencrypted<br />
sound monitoring<br />
over 250 meters (line-of-sight)<br />
via the commercially open<br />
2.4GHz spectrum, making it<br />
an indispensable intelligence<br />
gathering tool for nearly<br />
every scenario.<br />
Its high performance technology<br />
supports as many as 7 lightweight<br />
wireless sensors capable of very<br />
high intelligibility - even through<br />
concrete walls as thick as 50cm.<br />
The GuardSense receiver includes<br />
DSP based noise reduction, a<br />
built-in speaker, sensor power<br />
and signal monitoring, batteryconserving<br />
sleep functionality and<br />
optional built-in digital recorder.<br />
GuardSense is a wireless, standalone,<br />
high performance device that<br />
enables you to listen and record<br />
through air and through various<br />
surfaces including walls, floors,<br />
windows, and doors without the<br />
need to be inside the room in which<br />
the recording is taking place.<br />
It provides the user with handheld,<br />
digitally-encrypted sound<br />
monitoring over 250 meters (lineof-sight)<br />
via the commercially open<br />
2.4GHz spectrum.<br />
GuardSense has the following<br />
sensor types:<br />
Mic Microphone<br />
Transmitter Sensor<br />
The MIC sensor includes an<br />
omni-directional, highly sensitive<br />
microphone that can pick up a wide<br />
range of speech signals in the room.<br />
The unit transmits the audio<br />
channel to the receiver, in which<br />
ambient noise can be attenuated via<br />
the Receiver’s Noise Reduction 10<br />
segment’s control.<br />
DMic Directional Microphone<br />
Transmitter Sensor<br />
The DMIC (Directional Microphone)<br />
is very similar to the MIC as it<br />
captures speech, but this sensor<br />
uses an internal Noise Cancelling<br />
construction which provides better<br />
directivity (the speakers/target<br />
should be in front of and at the rear<br />
axis of the sensor). This sensor will<br />
not pick up signals further away<br />
from the sensor or at the sides<br />
of the sensor effectively and will<br />
reduce reverberation and echo.<br />
These characteristics, together<br />
with the control of the Noise<br />
Reduction in the receiver, enable<br />
maximum intelligibility from the<br />
speakers/target at the front and<br />
rear of the sensor.<br />
TMic Throw Microphone<br />
Transmitter Sensor<br />
Ruggedized omni microphone<br />
designed to be thrown long<br />
distances, survive impact and keep<br />
transmitting quality audio.<br />
cM contact Microphone<br />
Transmitter Sensor<br />
The CM (Contact Microphone)<br />
senses the vibrations of thin to<br />
medium thickness walls and<br />
converts these vibrations into<br />
audio signals. The sensor should<br />
be attached firmly to the structure,<br />
either using the needle or Blu Tack<br />
(for indoor applications) or the<br />
double side adhesive patches (for<br />
outdoor applications).<br />
TWcM Thick <strong>Wall</strong> contact<br />
Microphone Transmitter Sensor<br />
The TWCM (Thick <strong>Wall</strong> Contact<br />
Microphone) is very similar<br />
to the CM but utilizes higher<br />
sensitivity to maximize faint<br />
signals which are attenuated<br />
by thick walls. This sensor is not<br />
ideal for thin structures such as<br />
windows and doors.<br />
PMic Probe Microphone<br />
Transmitter Sensor<br />
Ultrasensitive omni microphone<br />
attached to 30cm semi-rigid<br />
probe, designed for insertion<br />
through tight spaces.
Technical Specifications<br />
RF Properties<br />
Transmitting frequency 2.4GHz<br />
Transmitting principle Digital, encrypted<br />
Maximum number of 7<br />
transmitters per receiver<br />
(one at a time)<br />
Maximum distance At least 250m<br />
between transmitter and<br />
receiver (open space)<br />
Maximum distance At least 250m<br />
between transmitter<br />
and receiver for remote<br />
activation (open space)<br />
Receiver antenna 5dBi<br />
Transmitter power 6-100mW<br />
(maximum power at max.<br />
distance between<br />
transmitter and receiver)<br />
Acoustic Properties<br />
Intelligibility through Up to 50cm (~20”)<br />
concrete wall thickness<br />
Frequency response 20 to 3400Hz<br />
Amplification Up to 10,000<br />
Noise reduction via DSP 0 to 22dB in 10 steps<br />
DSP latency 10msec<br />
Headphones output 102dB SPL<br />
sound pressure level<br />
Loudspeaker output >94dB SPL<br />
SPL (0.5 W @ 1m)<br />
Recording Properties<br />
Signal to Noise ratio 64dB<br />
Recording mode Mono<br />
Compression algorithm Without compression,<br />
u-Law, ADPCM 2-and<br />
4-bytes<br />
Sampling rate 5.5, 8 (default),<br />
11, 16 or 22kHz<br />
Frequency range 100-4000Hz<br />
PC interface USB 1.1, exchange rate<br />
up to 5.5Mbit<br />
Recording Times<br />
Without Compression 329 min (55 kbit/s)<br />
(SR=5.5 kHz)<br />
Without Compression 224 min (80 kbit/s)<br />
(SR=8 kHz) default<br />
Logarithmic Compression 400 min (44 kbit/s)<br />
(u- Law) (SR=5.5 kHz)<br />
Logarithmic Compression 280 min (64 kbit/s)<br />
(u- Law) (SR=8 kHz)<br />
ADPCM 4-bites 800 min (22 kbit/s)<br />
(SR=5.5 kHz)<br />
Recording Times continued...<br />
ADPCM 4-bites 560 min (32 kbit/s)<br />
(SR=8 kHz)<br />
ADPCM 2-bytes 1600 min (11 kbit/s)<br />
(SR=5.5 kHz)<br />
ADPCM 2-bytes 1120 min (16 kbit/s)<br />
(SR=8 kHz)<br />
Electronic Properties<br />
Recommended transmitter Photo-lithium CR2<br />
battery type<br />
Recommended receiver 4 x AA (Alkaline),<br />
batteries rechargeable can be<br />
used for shorter<br />
operational time<br />
Line out (mobile phone ear < 10mV<br />
piece/mic input compatible)<br />
Operational Properties<br />
Operating temperature range 0°C to +60°C<br />
(32°F-140°F)<br />
Receiver and transmitter Up to 8 hours<br />
operation time<br />
Dimensions and Weights<br />
Dimensions of transmitter 40 x 70 x 25mm<br />
(HxDxW)<br />
Weight transmitter 55g<br />
(including battery)<br />
Dimensions receiver 80 x 195 x 35mm<br />
(HxDxW)<br />
Weight receiver 450g<br />
(including batteries)<br />
Receiver antenna 190mm<br />
Package type & dimensions Rugged case, Explorer,<br />
434 x 415 x 149mm<br />
Package weight 5.5Kg
The GuardSense receiver is a<br />
multi-channel receiver designed<br />
for digital encrypted transmissions<br />
which utilizes advanced noise<br />
reduction (DSP) technology. It<br />
contains the main components<br />
for controlling power, microphone<br />
settings, volume and noise<br />
reduction settings, and for<br />
attaching headphones and an<br />
optional recording device.<br />
The basic GuardSense system<br />
comes with two lightweight<br />
wireless transmitter sensors: one<br />
microphone transmitter sensor<br />
and one contact microphone<br />
transmitter sensor.<br />
However, it can be connected<br />
up to seven wireless transmitter<br />
sensors in total, which are<br />
activated sequentially (not<br />
simultaneously).<br />
Technology<br />
GuardSense uses various types<br />
of microphones which sense<br />
pressure and pressure gradients<br />
through the air, alongside contact<br />
microphones which sense the<br />
microscopic vibrations resulting<br />
from sound and noises inside<br />
the room and translates them<br />
into audio signals. GuardSense<br />
is based on unique acoustic<br />
technology resulting in high<br />
quality sound.<br />
It includes a built-in DSP based<br />
Noise Reduction function that<br />
increases voice intelligibility<br />
in noisy environments or<br />
where there is ambient noise,<br />
such as air conditioning or in<br />
highly reverberant rooms. The<br />
GuardSense contact microphone<br />
heads are both highly sensitive<br />
and extremely robust devices. +<br />
Product Codes<br />
GuARDSEnSE TAcTicAl liSTEninG - Full Systems<br />
3-299-581 GuardSense Ultimate - including one receiver with built-in digital<br />
recorder, seven transmitters (4 Contact microphone transmitter<br />
sensor + 3 Microphone transmitter sensor), professional<br />
headphones, receiver antenna, batteries, package of Blu tack<br />
adhesive, two-sided adhesive stickers, Needle Kit (Plaster <strong>Wall</strong><br />
Needles & Butterfly screws), Guidance Manual & carrying case.<br />
3-299-582 GuardSense Professional - including one receiver, two transmitters<br />
(1 Contact microphone transmitter sensor + 1 Microphone<br />
transmitter sensor), professional headphones, receiver antenna,<br />
batteries, package of Blu tack adhesive, two-sided adhesive stickers,<br />
Needle Kit (Plaster <strong>Wall</strong> Needles & Butterfly screws), Guidance<br />
Manual & carrying case.<br />
GuARDSEnSE TAcTicAl liSTEninG - Accessories, components & upgrades<br />
3-299-583 GuardSense Built-in digital recorder (2-8hrs)<br />
3-299-585 Microphone Transmitter Sensor - Capture sound from all directions<br />
3-299-586 Directional Microphone Transmitter Sensor - Capture sound close to<br />
the microphone, reduces reverberation<br />
3-299-587 Throw Microphone Transmitter Sensor - Ruggedized omni<br />
microphone designed to be thrown long distances, survive impact<br />
and keep transmitting quality audio<br />
3-299-584 Contact Microphone Transmitter Sensor - Attach to window,<br />
doors, thin walls to capture speech through vibration of structures<br />
(attach with Blu-tack, adhesive tape, needle kit)<br />
3-299-588 Thick <strong>Wall</strong> Contact Microphone Transmitter Sensor - Two aggregate<br />
contact sensors for attachment to a thick wall (attach with Blu-tack,<br />
adhesive tape, needle kit)<br />
3-299-589 Probe Microphone Transmitter Sensor - Ultrasensitive omni<br />
microphone attached to 30cm semi-rigid probe, designed for<br />
insertion through tight spaces<br />
3-299-590 GuardSense multi-channel receiver designed for digital encrypted<br />
transmissions with built-in DSP based Noise Reduction function<br />
For further information contact<br />
<strong>Winkelmann</strong> (<strong>UK</strong>) Limited<br />
Unit 63, Rowfant Business Centre<br />
<strong>Wall</strong>age Lane, Rowfant, Near Crawley<br />
West Sussex RH10 4NQ <strong>UK</strong><br />
T: +44 (0) 1342 719024<br />
F: +44 (0) 1342 719030<br />
E: sales@winkelmann.co.uk<br />
www.winkelmann.co.uk