AWT-1 Transmitter - Audio Wireless
AWT-1 Transmitter - Audio Wireless
AWT-1 Transmitter - Audio Wireless
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>AWT</strong>-1 <strong>Transmitter</strong><br />
Territorial freedom, with switching bandwidth up to 120MHz<br />
for crews, camera operators and sound recordists
Territorial freedom and operational convenience,<br />
combined with exemplary audio quality, are the hallmarks<br />
of <strong>Audio</strong> <strong>Wireless</strong> systems. The <strong>AWT</strong> transmitter offers<br />
the utmost flexibility for crews, operators and sound<br />
recordists, whether working internationally or simply<br />
under challenging RF conditions.<br />
Its out-and-out practicality is reflected as much by its extra-wide<br />
frequency-switching bandwidth – up to 120MHz – as by its unique<br />
battery compartment. The unit's single AA battery is held in place by<br />
a captive, easy-twist compartment cover, with a click-stop<br />
mechanism. This is simple and intuitive in operation enabling quick,<br />
reliable battery changes to be made by feel alone – invaluable when<br />
working under pressure.<br />
Product features<br />
• Switching bandwidth up to 120MHz<br />
• Tunable in 25kHz steps<br />
• Switchable RF output power<br />
• Top-level flexibility for international working<br />
• Compact design, with rugged all-metal construction<br />
• 1 x AA alkaline provides up to 5 hours operating time or lithium<br />
battery for longer<br />
• Easy-twist battery compartment cover,<br />
with click-stop reassurance<br />
• External powering with adaptor leads<br />
• Unique mic-pre design maximises audio quality<br />
• Input sensitivity from -50dBu to 0dBu before limiting<br />
• Switchable low-cut filter<br />
• Easy operation by backlit LCD with programmable functions<br />
• Battery-level indication and transmitted “low batt” warning system<br />
• Pilot-tone carrier<br />
• Reliable, professional-grade connectors<br />
Quality performance worldwide<br />
The <strong>Audio</strong> <strong>Wireless</strong> <strong>AWT</strong> transmitter uses a unique design of lownoise<br />
microphone preamplifier – its AGC-Limiter is coupled with a<br />
low-noise VCO-PLL circuit, to produce the highest possible<br />
transmission quality. This design acknowledges the over-crowded<br />
spectrum and non-harmonised radio microphone allocations<br />
prevalent in many territories, with the wide frequency-switching<br />
bandwidth maximising its agility for worldwide, on-demand<br />
production. The RF transmission power can also be adjusted to<br />
adapt to regional regulations, and to increase battery life.<br />
Informative displays<br />
The <strong>AWT</strong> offers easy adjustment of the audio input level via the multifunction<br />
LCD display, as well as traditional easily visible LED display<br />
at the top panel (-10 and 0dB) indicating the audio level and allowing<br />
repeatable levels to be set. Continuous AF metering is displayed on<br />
the LCD. The <strong>AWT</strong> includes a soft audio limiting circuit, with a user-<br />
adjustable gain threshold to give a wide dynamic range. This<br />
advanced design enables the limiter to be used as an automatic<br />
level control, without the pumping effect usually associated with<br />
audio AGC, and it can also be used as a ‘distortionless’ emergency<br />
limiter to prevent over-modulation. Additional front-end protection is<br />
provided by an adjustable low-cut filter (set via the<br />
LCD), which reduces wind noise and counteracts<br />
close-microphone effects. Battery status is<br />
displayed on the transmitter’s LCD, and can be seen<br />
at a glance via the battery-monitoring LED indicator<br />
on the top panel.<br />
The system uses a pilot-tone carrier to operate the<br />
matching receiver’s squelch. This enables the<br />
receiver to remain muted until it receives the pilot<br />
tone from the matching transmitter. An option on the<br />
display menu also enables the user to lock the<br />
system against accidental adjustment.<br />
For long-term reliability, the <strong>AWT</strong> uses a very high<br />
quality 6-pin Lemo mic input connector and a<br />
miniature SMA RF antenna connector. Dedicated<br />
audio input cables are available to connect mic- or<br />
line-level signals to the transmitter.<br />
The <strong>AWT</strong>’s unique design, together with its overall<br />
strength and durability, is focused on withstanding<br />
the heavy demands of day-in-day-out location use,<br />
while its compact, smoothly sculpted case is<br />
comfortable to wear – ideal for situations where<br />
concealment is necessary.
RF Transmission System<br />
Carrier Range 470 to 790MHz<br />
Number of frequencies Switchable in 25 kHz steps<br />
Switching bandwidth up to 120MHz<br />
Modulation System F3EGN<br />
RF output power switchable, typical: 50mW, 30mW and 10mW<br />
RF output connector SMA 50 Ohms<br />
AF characteristics<br />
AF sensitivity 0dBu to -50dBu adjustable in 1dB steps<br />
Compander system <strong>Audio</strong> <strong>Wireless</strong> UNR (Unique Noise Reduction)<br />
System S/N Ratio >100dB<br />
System Frequency Response 60Hz to 20 kHz, ±2dB<br />
System THD
<strong>Audio</strong> <strong>Wireless</strong> <strong>AWT</strong>-1<br />
<strong>Transmitter</strong><br />
Switching bandwidth up to<br />
120MHz, for crews,<br />
camera operators<br />
and sound<br />
recordists.<br />
<strong>Audio</strong> <strong>Wireless</strong> AWDR-1<br />
Diversity Receiver<br />
Small, true-diversity receiver<br />
for broadcast and location<br />
recording applications,<br />
switchable RF front-end<br />
filtering.<br />
<strong>Audio</strong> <strong>Wireless</strong><br />
Monitoring Receivers<br />
Monitoring mobility for<br />
presenters, directors<br />
and crew, in broadcast<br />
and film, in studio or on<br />
location.<br />
<strong>Audio</strong> <strong>Wireless</strong> Ltd<br />
Phoenix 5<br />
Andrew Mitchell Building<br />
Elstree Studios<br />
Shenley Road, Borehamwood<br />
Hertfordshire<br />
WD6 1JG<br />
UK<br />
Telephone: +44 (0)20 8324 2375<br />
www.audiowireless.co.uk<br />
Email: enquiry@audiowireless.co.uk