Brochure - Sony Professional Solutions Asia Pacific
Brochure - Sony Professional Solutions Asia Pacific
Brochure - Sony Professional Solutions Asia Pacific
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Timecode/User Bit Recording and HDMI Embedded Timecode Output<br />
The HXR-NX30P features the important professional camcorder functions of timecode and user bit settings. Like other NXCAM camcorders, the<br />
HXR-NX30P’s timecodes can be centrally reset using the supplied infrared remote control to allow easy synchronization of video from multiple<br />
cameras. Using NLE software, live footage shot with multiple NXCAM camcorders can be efficiently edited with timecode sync. Timecodes and user<br />
bits can also be output through an HDMI jack.<br />
Built-in Light<br />
You can use this built-in<br />
light as a flash when<br />
shooting still images or as<br />
an auxiliary light source<br />
when recording video.<br />
Using the NightShot mode<br />
is particularly effective<br />
when recording in low-light<br />
conditions and allows you<br />
to capture otherwise<br />
impossible shots.<br />
Built-in USB cable for easy file transfer/charge<br />
The high-speed, built-in USB 2.0 cable allows for easy connection<br />
to your computer for charging or file transfer without having to<br />
remember separate cables. It also fits conveniently into the hand<br />
strap so it’s out of the way until you need it. Charging your<br />
camcorder is faster than ever now through the USB; for every two<br />
minutes of charge time you get one minute of recording time<br />
Direct Copy to external HDD without PC<br />
Store your memories or backup important shots by copying footage<br />
directly from your camcorder to an external hard disk drive*, which is<br />
sold separately, all without the need for a computer. Your camcorder<br />
can also access videos stored on the external hard drive for playback<br />
on your HDTV, allowing you to utilize the camcorder’s handy playback<br />
features.<br />
1. Direct Copy is compatible with USB media that meets the following requirements<br />
• USB media that meets the USB2.0 requirement.<br />
• For external HDD or USB memory under 2TB, an AC powered external HDD is recommended.<br />
• USB media formatted in the FAT32 file system. In the case when USB media is not in<br />
FAT32 file system, reformatting is required and all data will be erased.<br />
Note: There may be cases when USB media is not compatible with the Direct Copy function.<br />
2. When using Direct Copy the camcorder needs to be connected to AC power.<br />
3. Using VMC-UAM1(supplied) cable when the HXR-NX30P is connected to External HDD.<br />
4. Connection via USB-hub is not supported.<br />
ACCESSORIES<br />
Rechargeable Battery Pack<br />
NP-FV70 (6.8 V / 14.0 Wh / 2060 mAh)<br />
NP-FV100 (6.8 V / 26.5 Wh / 3900 mAh)<br />
Accessory Kit<br />
ACC-V1BP (Include NP-FV100 and AC-VQV10)<br />
AC Adaptor/Charger<br />
AC-VQV10<br />
(AC 100 V – 240 V)<br />
Wide Conversion Lens<br />
VCL-HGA07B (0.75x)*<br />
Built-in Projector<br />
A built-in projector<br />
can project images<br />
up to 100 inches<br />
wide (when<br />
projecting 5m from<br />
a screen, 40 inches<br />
wide when<br />
projecting 2m from<br />
a screen). Large-screen projection of images enables all the staff<br />
involved to check the rushes at the end of the shoot and reduces the<br />
need for an external display.<br />
Geotagging with built-in GPS receiver<br />
A built-in GPS receiver makes the HXR-NX30P an ideal choice for<br />
professional videographers. The receiver gives you the ability to “tag”<br />
your shooting locations as a future reference if you need to return to<br />
the same location or to create a log of areas covered when surveying<br />
remote locations.<br />
Additionally, the receiver automatically adjusts your camcorder’s<br />
clock to the proper time zone when international travel is part of your<br />
assignment. Your locations can be tracked on Google Maps and all<br />
GPS data can be extracted with a CMU is supplied PC software.<br />
Battery Charger<br />
BC-TRV<br />
(AC 100 V – 240 V)<br />
Tele Conversion Lens<br />
VCL-HG1737C (1.7x)*<br />
* The supplied step-down ring is required to mount conversion lenses. Conversion<br />
lenses cannot be mounted unless the supplied hood is removed. Also, be sure<br />
to set the conversion lens mode on the body before using. When using the Wide<br />
Conversion Lens setting, switch Balanced Optical SteadyShot off.<br />
Accessory Kit<br />
ACC-VA1BP<br />
(include NP-FV70, BC-TRV, RM-VD1 etc)<br />
*HXR-NX30P cannot output S Video out<br />
Memory Stick PRO-HG Duo<br />
MS-HX32B<br />
(32 GB, 16 GB, 8 GB)<br />
SD / SDHC Memory Card<br />
SF-32UX<br />
(32 GB, 16 GB, 8 GB,)