Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.mastercuttool.com<br />
Dental Product<br />
Catalog<br />
Vol. 5
2<br />
<strong>Mastercut</strong> <strong>Tool</strong> <strong>Corp</strong>. has been providing tools and services to the Solid Carbide Cutting <strong>Tool</strong> industry for<br />
over 25 years. Visit www.mastercuttool.com for details about the wide range of products and services offered.<br />
Terms and Conditions of Sale:<br />
To Order: Orders may be faxed or e-mailed in, however online ordering is also available. For online ordering<br />
setup, please contact our customer service department. When placing your order, please specify quantity<br />
and part numbers.<br />
Minimum Orders: $50 for standard items, $200 for special orders. Orders below $50 are subject to a $7.50<br />
handling fee.<br />
Standard Payment Terms: Overseas customers: Prepaid. US customers: Due upon receipt. Open accounts can<br />
be established under certain conditions.<br />
Freight: Orders totaling $1500 or more are shipped freight prepaid barring any special labeling or etching<br />
requirements. Freight is F.O.B. shipping point. A 1.5% special marking fee is available as an option to receive<br />
prepaid freight for privately marked orders exceeding $1500. Prepaid freight only applies to ground shipments<br />
within the US.<br />
Return Policy: We do not accept returns on items which we do not maintain in stock. Returns are subject to a<br />
15% re-stocking fee. No returns will be accepted beyond 6 months from date of shipment.<br />
Products in this catalog are subject to change without notice.<br />
Table of Contents:<br />
Terms and Conditions, Special Services Page 2<br />
Coating Options and Information Page 3<br />
Dental and Medical HP Carbides Page 4, 6<br />
Dental Lathe <strong>Burs</strong> Page 5 - 6<br />
Dental <strong>Milling</strong> <strong>Burs</strong> Page 7 - 9<br />
Flexo <strong>Burs</strong> for Flexible Partials Page 10<br />
EuroCut <strong>Burs</strong> Page 10<br />
TriCut Page 10<br />
Diamond Discs Page 11 - 12<br />
Dental Diamonds/Lab Diamonds<br />
Electric Handpiece Motor Set<br />
Page<br />
Page<br />
12 - 15<br />
16<br />
Special Services:<br />
Special <strong>Tool</strong>ing for Your Requirements: When you need a non-standard tool for a specific job, give us a call.<br />
Requirements for special tooling or modifications of existing standard items will be given prompt, expert<br />
attention.<br />
Resharpening: <strong>Mastercut</strong> <strong>Tool</strong> <strong>Corp</strong>. employs skilled craftsmen and advanced equipment to provide excellent<br />
resharpening services. We can sharpen dull cutters regardless of the manufacturer. This is an excellent<br />
and efficient way to get new tool performance at a fraction of the cost. Prices for resharpening <strong>Mastercut</strong><br />
tools are noted in this Catalog, for other tools please inquire about our resharpening prices.<br />
Recoating: Along with the ability to resharpen, <strong>Mastercut</strong> <strong>Tool</strong> <strong>Corp</strong>. also provides recoating options on<br />
most of our tools. We can recoat most cutters regardless of the manufacturer. For more information, call or<br />
email us.
Coating options:<br />
PowerA is <strong>Mastercut</strong> <strong>Tool</strong> <strong>Corp</strong>’s new proprietary coating that surpasses<br />
the proven performance of AlTiN for superior extreme machining results.<br />
With a thermal stability above 1,600°F (900°C) this coating excels in<br />
high speed dry machining applications. Harder than our original AlTiN<br />
by 1000 HV, with an increase in thermal stability of 200°F (100°C),<br />
PowerA will ensure that heat buildup, friction, and edge breakdown are<br />
all greatly reduced, resulting in better cutting performance and longer<br />
tool life. As with it’s predecessor, PowerA will be an excellent coating for<br />
applications involving tough-to-cut tool steels, stainless, cast iron and<br />
non-ferrous material, and it can also be used very effectively for<br />
interrupted cuts. PowerA can be run at more aggressive speeds and feeds than other coatings, and<br />
can be run without coolant in specific applications. PowerA continues to be the coating of choice<br />
for tough-to-cut materials.<br />
Hardness: 3800 HV, Coating Thickness: 2-4 Microns, Thermal Stability: 1,650°F or 900°C.<br />
PowerZ Zirconium Nitride (ZrN) Coating has proven itself over the years<br />
in many industries. ZrN’s characteristics have made it suitable for<br />
applications where TiN has not performed well. It has excellent erosion<br />
resistance, good lubricity and ductility combined with an attractive<br />
appearance to make it stand out from the all the rest. This coating has<br />
worked well in all non-ferrous applications. Recommended Applications:<br />
Aluminum, Brass, Cast Iron, Graphite, Ni Alloys, Ti Alloys, 300/PH Series Stainless Zinc, Glass-filled<br />
Plastics (Not recommended for carbon steels). Coating Characteristics: Thickness (2-5 microns),<br />
Hardness (2800 Vickers), Thermal 1,049°F (550°C), Lubricity (0.5 coefficient of friction).<br />
PowerT Titanium Nitride (TiN) Coating is bright gold in color, has an<br />
ambient temperature hardness in the 2800 Vickers (low 80Rc) range, a<br />
coefficient of friction under 0.5, and a thermal stability up to about 1000°F.<br />
Cutting speeds, feeds, wear resistance and tool life generally improve.<br />
PowerDLC (diamond like coating) offers the highest hardness, the<br />
smoothest surface, and a very low coefficient of friction. This specialty<br />
coating is used primarily for cutting tools used in composite materials with<br />
an affinity for sticking. It gives the closest performance to real diamond<br />
coatings, but in a thin layer form.<br />
Why use a Coating?<br />
• Carbide tool’s life increases 2 to 5 times. Deposition<br />
temperatures as low as 480°-840°F (250°-450°C) protect<br />
carbide’s binder from deterioration, by comparison with<br />
the CVD process applied at more than 1,850°F (1,000°C).<br />
• Isolates the tool from the part, avoids edge buildup<br />
and tool cratering.<br />
• Reduces friction against workpiece and chips, reduces<br />
spindle torque, less vibration, better finish.<br />
• Speed and Feed increases from 10 to 50 percent.<br />
• Reduces or eliminates coolant (with specific coatings).<br />
• Repeatable, stable performance of the coatings<br />
between batches.<br />
PowerA<br />
Consider PowerA<br />
coating to run more<br />
aggressive speeds<br />
and feeds!<br />
PowerZ<br />
All of our burs are available with<br />
advanced PVD coatings.<br />
PowerT<br />
PowerDLC<br />
PowerDLC and Real Diamond Coatings<br />
available upon request. Pricing in this<br />
catalog does not reflect those of Diamond<br />
coatings, please call for more info.<br />
3
Dental and Medical HP Carbides<br />
4<br />
Resharpening Prices for Regular, Fine and Coarse cuts below: Uncoated: $10.80 Coated: $12.91<br />
Chipbreaker Cut (Regular) Prices: Uncoated $19.85 Coated $23.72<br />
52-C 52-D 53-A<br />
63-B<br />
82-T 84-T<br />
83-E 83-EE 88-A 47-X 73-C 51-A 61-A/81-A<br />
Diamond Cut (Fine)<br />
Type Description<br />
44-C 1/8 x 9/16 x .0925 x 1-1/2 Cylinder<br />
41-P 1/8 x 5/8 x .0925 x 1-1/2 Cone Shape<br />
44-CM 3 x 14 x .2.35 x 38 Cylinder (Metric)<br />
41-PM 3 x 16 x 2.35 x 38 Cone Shape (Metric)<br />
Prices:<br />
84-T/SP<br />
88-A/SP<br />
Uncoated $19.85 Coated $23.72<br />
52-C/XF 52-D/XF 53-A/XF 63-B/XF 82-T/XF 84-T/XF 83-E/XF 83-EE/XF 88-A/XF 47X/XF 73-C/XF 51-A/XF 61-A/81-A/XF<br />
Uncoated $19.85 Coated $23.72<br />
Doublecut (Coarse) Prices:<br />
52-C/XC 52-D/XC 53-A/XC 63-B/XC 82-T/XC 84-T/XC 83-E/XC 83-EE/XC 88-A/XC 47X/XC 73-C/XC 51-A/XC 61-A/81-A/XC<br />
Chipbreaker Cut Carbide Dental <strong>Burs</strong><br />
HP Shank 1/8 Head (Fractional) ,<br />
3mm Head (Metric) Prices:<br />
Resharp: Uncoated: $9.00<br />
Coated: $10.09<br />
44-C<br />
44-CM<br />
41-P<br />
41-PM<br />
Uncoated<br />
$16.54<br />
Coated<br />
$18.53<br />
Dental Bur Part IDs:<br />
1. Begin with ‘DEN’<br />
2. Indicate bur shape and cut type<br />
(without dashes or slashes)<br />
3. Indicate coating if desired<br />
For Example: For Type 52-C with a<br />
Diamond Cut and a PowerA Coating,<br />
the part number would be<br />
‘DEN52CXFTA’<br />
Fastmill<br />
Resharp: Uncoated: $14.40<br />
Coated: $16.51<br />
Dental Step-Drills<br />
Prices:<br />
Uncoated Coated<br />
$17.64 $19.64<br />
Resharp: Uncoated: $9.60<br />
Coated: $10.69<br />
35-0780<br />
Uncoated<br />
$26.46<br />
Coated<br />
$30.33<br />
EDP# (Metric) OD1xOD2xLOC1xLOC2xShankxOAL<br />
35-0780 1.95 x 3 x 5.75 x 6.2 x 3 x 35 Step Drill<br />
Bur Coating IDs:<br />
PowerA = ‘TA’<br />
PowerT = ‘TN’<br />
Prices:<br />
For all other coatings<br />
please simply<br />
indicate the coating<br />
by name<br />
HP Shank Carbide<br />
Dental Bur Dimensions<br />
Type OD x LOC x Shank x OAL ODxLOCxshankxOAL<br />
52-C 1/4 x 3/8 x .0925 x 1-7/8 6.3x9.5x2.35x48<br />
52-D 1/4 x 1/4 x .0925 x 1-3/4 6.3x6.3x2.35x45<br />
53-A 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
63-B 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
82-T 1/4 x 5/8 x .0925 x 2 6.3x12.7x2.35x50<br />
84-T 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
83-E 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
88-A 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
47/X 5/32 x 1/2 x .0925 x 2 4x12.4x2.35x50<br />
73-C 1/4 x 1/4 x .0925 x 1-3/4 6.3x6.3x2.35x45<br />
61-A/81-A 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
51-A 3/16 x 3/8 x .0925 x 1-7/8 5x9.5x2.35x48<br />
84-T/SP 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
88-A/SP 1/4 x 1/2 x .0925 x 2 6.3x12.7x2.35x50<br />
All our burs are precision<br />
ground on state of the art CNC<br />
machines for smooth operation.<br />
T<br />
All Dental <strong>Burs</strong><br />
Shank Tolerance +.0000 -.0005
Dental Lathe <strong>Burs</strong> (1/4 Shank fractional and 6mm Shank metric)<br />
Fractional<br />
Metric<br />
Fractional<br />
Metric<br />
Fractional<br />
Metric<br />
Chipbreaker Cut<br />
Resharp: Uncoated: $16.80 Coated: $21.01<br />
Doublecut<br />
Fastmill<br />
TYPE OD x LOC x Shank x OAL<br />
Uncoated PowerT Coated PowerA Coated<br />
Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill<br />
A-3/8 3/8 x 3/4 x 1/4 x 2-1/2 DENA3/8 DENA3/8XC DENA3/8FM DENA3/8TN DENA3/8XCTN DENA3/8FMTN DENA3/8TA DENA3/8XCTA DENA3/8FMTA<br />
B-3/8 3/8 x 1-1/16 x 1/4 x 2-13/16 DENB3/8 DENB3/8XC DENB3/8FM DENB3/8TN DENB3/8XCTN DENB3/8FMTN DENB3/8TA DENB3/8XCTA DENB3/8FMTA<br />
C-3/8 3/8 x 3/4 x 1/4 x 2-1/2 DENC3/8 DENC3/8XC DENC3/8FM DENC3/8TN DENC3/8XCTN DENC3/8FMTN DENC3/8TA DENC3/8XCTA DENC3/8FMTA<br />
D-3/8 3/8 x 5/8 x 1/4 x 2-3/8 DEND3/8 DEND3/8XC DEND3/8FM DEND3/8TN DEND3/8XCTN DEND3/8FMTN DEND3/8TA DEND3/8XCTA DEND3/8FMTA<br />
E-3/8 3/8 x 3/4 x 1/4 x 2-1/2 DENE3/8 DENE3/8XC DENE3/8FM DENE3/8TN DENE3/8XCTN DENE3/8FMTN DENE3/8TA DENE3/8XCTA DENE3/8FMTA<br />
F-3/8 3/8 x 5/16 x 1/4 x 2-1/8 DENF3/8 DENF3/8XC DENF3/8FM DENF3/8TN DENF3/8XCTN DENF3/8FMTN DENF3/8TA DENF3/8XCTA DENF3/8FMTA<br />
A-1/2 1/2 x 1 x 1/4 x 2-3/4 DENA1/2 DENA1/2XC DENA1/2FM DENA1/2TN DENA1/2XCTN DENA1/2FMTN DENA1/2TA DENA1/2XCTA DENA1/2FMTA<br />
B-1/2 1/2 x 1-1/8 x 1/4 x 2-7/8 DENB1/2 DENB1/2XC DENB1/2FM DENB1/2TN DENB1/2XCTN DENB1/2FMTN DENB1/2TA DENB1/2XCTA DENB1/2FMTA<br />
C-1/2 1/2 x 1 x 1/4 x 2-3/4 DENC1/2 DENC1/2XC DENC1/2FM DENC1/2TN DENC1/2XCTN DENC1/2FMTN DENC1/2TA DENC1/2XCTA DENC1/2FMTA<br />
D-1/2 1/2 x 7/8 x 1/4 x 2-5/8 DEND1/2 DEND1/2XC DEND1/2FM DEND1/2TN DEND1/2XCTN DEND1/2FMTN DEND1/2TA DEND1/2XCTA DEND1/2FMTA<br />
E-1/2 1/2 x 1 x 1/4 x 2-3/4 DENE1/2 DENE1/2XC DENE1/2FM DENE1/2TN DENE1/2XCTN DENE1/2FMTN DENE1/2TA DENE1/2XCTA DENE1/2FMTA<br />
F-1/2 1/2 x 7/16 x 1/4 x 2-1/4 DENF1/2 DENF1/2XC DENF1/2FM DENF1/2TN DENF1/2XCTN DENF1/2FMTN DENF1/2TA DENF1/2XCTA DENF1/2FMTA<br />
Metric<br />
Prices:<br />
Uncoated<br />
$38.59<br />
Coated<br />
$46.33<br />
Resharp: Uncoated: $18.00 Coated: $22.21 Prices:<br />
Resharp: Uncoated: $19.80 Coated: $24.01<br />
Uncoated<br />
$41.35<br />
Coated<br />
$49.09<br />
Prices:<br />
Uncoated<br />
$45.48<br />
Coated<br />
$53.21<br />
Chipbreaker Cut<br />
Resharp: Uncoated: $21.00 Coated: $26.74<br />
A 3/8 B 3/8 C 3/8 D 3/8 E 3/8 F 3/8 A 1/2 B 1/2 C 1/2 D 1/2 E 1/2 F 1/2<br />
A-095 B-095 C-095 D-095 E-095 F-095 A-127 B-127 C-127 D-127 E-127 F-127<br />
Doublecut<br />
Resharp: Uncoated: $22.20 Coated: $27.94<br />
A 3/8XC B 3/8XC C 3/8XC D 3/8XC E 3/8XC F 3/8XC A 1/2XC B 1/2XC C 1/2XC D 1/2XC E 1/2XC F 1/2XC<br />
A-095 B-095 C-095 D-095 E-095 F-095<br />
A-127 B-127 C -127 D-127 E-127 F-127<br />
Fastmill<br />
Resharp: Uncoated: $25.20 Coated: $30.94<br />
A 3/8FM B 3/8FM C 3/8FM D 3/8FM E 3/8FM F 3/8FM A 1/2FM B 1/2FM C 1/2FM D 1/2FM E 1/2FM F 1/2FM<br />
A -095 B-095 C-095 D-095 E-095 F-095 A-127 B-127 C-127 D-127 E-127 F-127<br />
Prices:<br />
Prices:<br />
Prices:<br />
Uncoated<br />
A-095 9.5x19x6x63 DENA095 DENA095XC DENA095FM DENA095TN DENA095XCTN DENA095FMTN DENA095TA DENA095XCTA DENA095FMTA<br />
B-095 9.5x27x6x71 DENB095 DENB095XC DENB095FM DENB095TN DENB095XCTN DENB095FMTN DENB095TA DENB095XCTA DENB095FMTA<br />
C-095 9.5x19x6x63 DENC095 DENC095XC DENC095FM DENC095TN DENC095XCTN DENC095FMTN DENC095TA DENC095XCTA DENC095FMTA<br />
D-095 9.5x16x6x60 DEND095 DEND095XC DEND095FM DEND095TN DEND095XCTN DEND095FMTN DEND095TA DEND095XCTA DEND095FMTA<br />
E-095 9.5x19x6x63 DENE095 DENE095XC DENE095FM DENE095TN DENE095XCTN DENE095FMTN DENE095TA DENE095XCTA DENE095FMTA<br />
F-095 9.5x8x6x54 DENF095 DENF095XC DENF095FM DENF095TN DENF095XCTN DENF095FMTN DENF095TA DENF095XCTA DENF095FMTA<br />
A-127 12.7x25x6x70 DENA127 DENA127XC DENA127FM DENA127TN DENA127XCTN DENA127FMTN DENA127TA DENA127XCTA DENA127FMTA<br />
B-127 12.7x28.5x6x73 DENB127 DENB127XC DENB127FM DENB127TN DENB127XCTN DENB127FMTN DENB127TA DENB127XCTA DENB127FMTA<br />
C-127 12.7x25x6x70 DENC127 DENC127XC DENC127FM DENC127TN DENC127XCTN DENC127FMTN DENC127TA DENC127XCTA DENC127FMTA<br />
D-127 12.7x22x6x66 DEND127 DEND127XC DEND127FM DEND127TN DEND127XCTN DEND127FMTN DEND127TA DEND127XCTA DEND127FMTA<br />
E-127 12.7x25x6x70 DENE127 DENE127XC DENE127FM DENE127TN DENE127XCTN DENE127FMTN DENE127TA DENE127XCTA DENE127FMTA<br />
F-127 12.7x11x6x57 DENF127 DENF127XC DENF127FM DENF127TN DENF127XCTN DENF127FMTN DENF127TA DENF127XCTA DENF127FMTA<br />
$48.24<br />
Coated<br />
$58.78<br />
Uncoated<br />
$50.99<br />
Coated<br />
$61.53<br />
Uncoated<br />
$57.60<br />
Coated<br />
$68.15<br />
5
6<br />
Diamond and Chipbreaker Cut HP Shank <strong>Burs</strong><br />
Prices:<br />
MC-2 MC-4 MC-5 MC-6 MC-7 MC-8<br />
Diamond Cut<br />
71G 33C 32P 31P<br />
Chipbreaker Cut<br />
Series 88 <strong>Burs</strong><br />
TYPE<br />
OD x LOC x Shank<br />
x OAL<br />
TYPE OD x LOC x Shank x OAL Uncoated PowerA Coated PowerT Coated<br />
MC-2 1/16 x 1/4 x .0925 x 1-1/2 DENMC-2 DENMC-2TA DENMC-2TN<br />
MC-4 3/32 x 3/8 x .0925 x 1-1/2 DENMC-4 DENMC-4TA DENMC-4TN<br />
MC-5 3/32 x 3/32 x .0925 x 1-1/2 DENMC-5 DENMC-5TA DENMC-5TN<br />
MC-6 3/32 x 3/8 x .0925 x 1-1/2 DENMC-6 DENMC-6TA DENMC-6TN<br />
MC-7 3/32 x 1/8 x .0925 x 1-1/2 DENMC-7 DENMC-7TA DENMC-7TN<br />
MC-8 3/32 x 5/8 x .0925 x 1-1/2 DENMC-8 DENMC-8TA DENMC-8TN<br />
71G 3/32 x 1/8 x .0925 x 1-1/2 DEN71-G DEN71-GTA DEN71-GTN<br />
33C 3/32 x 3/8 x .0925 x 1-1/2 DEN33-C DEN33-CTA DEN33-CTN<br />
32P 1/16 x 3/8 x .0925 x 1-1/2 DEN32-P DEN32-PTA DEN32-PTN<br />
31P 3/32 x 5/8 x .0925 x 1-1/2 DEN31-P DEN31-PTA DEN31-PTN<br />
88-A-4 88-B-4<br />
88-C-4 88-D-4<br />
88-T-4<br />
88-E-4<br />
88-F-4<br />
88M-A-4 88M-B-4<br />
88M-C-4<br />
88M-D-5<br />
88M-T-5<br />
88M-E-5<br />
88M-F-6<br />
Uncoated PowerA Coated PowerT Coated<br />
Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill<br />
88-A-4 1/4 x 5/8 x 1/4 x 2 88-A-4 88-A-4XC 88-A-4FM 88-A-4TA 88-A-4XCTA 88-A-4FMTA 88-A-4TN 88-A-4XCTN 88-A-4FMTN<br />
88-B-4 1/4 x 5/8 x 1/4 x 2 88-B-4 88-B-4XC 88-B-4FM 88-B-4TA 88-B-4XCTA 88-B-4FMTA 88-B-4TN 88-B-4XCTN 88-B-4FMTN<br />
88-C-4 1/4 x 5/8 x 1/4 x 2 88-C-4 88-C-4XC 88-C-4FM 88-C-4TA 88-C-4XCTA 88-C-4FMTA 88-C-4TN 88-C-4XCTN 88-C-4FMTN<br />
88-D-4 1/4 x 5/8 x 1/4 x 2 88-D-4 88-D-4XC 88-D-4FM 88-D-4TA 88-D-4XCTA 88-D-4FMTA 88-D-4TN 88-D-4XCTN 88-D-4FMTN<br />
88-T-4 1/4 x 5/8 x 1/4 x 2 88-T-4 88-T-4XC 88-T-4FM 88-T-4TA 88-T-4XCTA 88-T-4FMTA 88-T-4TN 88-T-4XCTN 88-T-4FMTN<br />
88-E-4 1/4 x 3/8 x 1/4 x 2 88-E-4 88-E-4XC 88-E-4FM 88-E-4TA 88-E-4XCTA 88-E-4FMTA 88-E-4TN 88-E-4XCTN 88-E-4FMTN<br />
88-F-4 1/4 x 5/8 x 1/4 x 2 88-F-4 88-F-4XC 88-F-4FM 88-F-4TA 88-F-4XCTA 88-F-4FMTA 88-F-4TN 88-F-4XCTN 88-F-4FMTN<br />
Metric<br />
Uncoated $16.54 Coated $18.53<br />
Resharp: Uncoated: $9.00 Coated: $10.09<br />
Prices:<br />
Uncoated<br />
Chipbreaker<br />
Uncoated<br />
Doublecut<br />
Uncoated<br />
Fastmill<br />
Coated<br />
Chipbreaker<br />
Coated<br />
Doublecut<br />
Coated<br />
Fastmill<br />
$18.85 $19.85 $21.61 $24.68 $27.34 $32.20<br />
Resharp: $10.20 $10.80 $11.76 $13.43 $14.88 $17.53<br />
Fractional<br />
Metric<br />
88M-A-4 6x16x6x50 88M-A-4 88M-A-4XC 88M-A-4FM 88M-A-4TA 88M-A-4XCTA 88M-A-4FMTA 88M-A-4TN 88M-A-4XCTN 88M-A-4FMTN<br />
88M-B-4 6x16x6x50 88M-B-4 88M-B-4XC 88M-B-4FM 88M-B-4TA 88M-B-4XCTA 88M-B-4FMTA 88M-B-4TN 88M-B-4XCTN 88M-B-4FMTN<br />
88M-C-4 6x16x6x50 88M-C-4 88M-C-4XC 88M-C-4FM 88M-C-4TA 88M-C-4XCTA 88M-C-4FMTA 88M-C-4TN 88M-C-4XCTN 88M-C-4FMTN<br />
88M-D-5 6x16x6x50 88M-D-5 88M-D-5XC 88M-D-5FM 88M-D-5TA 88M-D-5XCTA 88M-D-5FMTA 88M-D-5TN 88M-D-5XCTN 88M-D-5FMTN<br />
88M-T-5 6x16x6x50 88M-T-5 88M-T-5XC 88M-T-5FM 88M-T-5TA 88M-T-5XCTA 88M-T-5FMTA 88M-T-5TN 88M-T-5XCTN 88M-T-5FMTN<br />
88M-E-5 6x9.5x6x50 88M-E-5 88M-E-5XC 88M-E-5FM 88M-E-5TA 88M-E-5XCTA 88M-E-5FMTA 88M-E-5TN 88M-E-5XCTN 88M-E-5FMTN<br />
88M-F-6 6x16x6x50 88M-F-6 88M-F-6XC 88M-F-6FM 88M-F-6TA 88M-F-6XCTA 88M-F-6FMTA 88M-F-6TN 88M-F-6XCTN 88M-F-6FMTN<br />
Single Cut = Special Order<br />
Doublecut = ‘XC’<br />
Bur Cut Types<br />
Chipbreaker Cut = Default<br />
Diamond Cut = ‘XF’<br />
Fastmill = ‘FM’
<strong>Milling</strong> <strong>Burs</strong> (for use on all popular CAD/CAM milling machines, including implant restoration applications)<br />
Standard Length 2 Flute <strong>Milling</strong> <strong>Burs</strong><br />
OD x LOC x Shank x OAL SQ PowerA Ball PowerA<br />
.005x.015x1/8x1-1/2 DEN2200S $38.59 DEN2200B $41.90<br />
.010x.030x1/8x1-1/2 DEN2203S $38.59 DEN2203B $41.90<br />
.015x.045x1/8x1-1/2 DEN2206S $38.59 DEN2206B $41.90<br />
.020x.060x1/8x1-1/2 DEN2209S $38.59 DEN2209B $41.90<br />
.025x.075x1/8x1-1/2 DEN2212S $38.59 DEN2212B $41.90<br />
.030x.090x1/8x1-1/2 DEN2215S $38.59 DEN2215B $41.90<br />
.035x.105x1/8x1-1/2 DEN2218S $38.59 DEN2218B $41.90<br />
.040x.120x1/8x1-1/2 DEN2221S $38.59 DEN2221B $41.90<br />
.045x.135x1/8x1-1/2 DEN2224S $38.59 DEN2224B $41.90<br />
.050x.150x1/8x1-1/2 DEN2227S $38.59 DEN2227B $41.90<br />
.055x.165x1/8x1-1/2 DEN2230S $38.59 DEN2230B $41.90<br />
.060x.180x1/8x1-1/2 DEN2233S $38.59 DEN2233B $41.90<br />
.065x.195x1/8x1-1/2 DEN2236S $38.59 DEN2236B $41.90<br />
.070x.210x1/8x1-1/2 DEN2239S $38.59 DEN2239B $41.90<br />
.075x.225x1/8x1-1/2 DEN2242S $38.59 DEN2242B $41.90<br />
.080x.240x1/8x1-1/2 DEN2245S $38.59 DEN2245B $41.90<br />
.085x.255x1/8x1-1/2 DEN2248S $38.59 DEN2248B $41.90<br />
.090x.270x1/8x1-1/2 DEN2251S $38.59 DEN2251B $41.90<br />
.095x.285x1/8x1-1/2 DEN2254S $38.59 DEN2254B $41.90<br />
.100x.300x1/8x1-1/2 DEN2257S $38.59 DEN2257B $41.90<br />
.105x.315x1/8x1-1/2 DEN2260S $38.59 DEN2260B $41.90<br />
.110x.330x1/8x1-1/2 DEN2263S $38.59 DEN2263B $41.90<br />
.115x.345x1/8x1-1/2 DEN2266S $38.59 DEN2266B $41.90<br />
.120x.360x1/8x1-1/2 DEN2269S $38.59 DEN2269B $41.90<br />
Standard Length 4 Flute <strong>Milling</strong> <strong>Burs</strong><br />
OD x LOC x Shank x OAL SQ PowerA Ball PowerA<br />
.005x.015x1/8x1-1/2 DEN2400S $38.59 DEN2400B $41.90<br />
.010x.030x1/8x1-1/2 DEN2403S $38.59 DEN2403B $41.90<br />
.015x.045x1/8x1-1/2 DEN2406S $38.59 DEN2406B $41.90<br />
.020x.060x1/8x1-1/2 DEN2409S $38.59 DEN2409B $41.90<br />
.025x.075x1/8x1-1/2 DEN2412S $38.59 DEN2412B $41.90<br />
.030x.090x1/8x1-1/2 DEN2415S $38.59 DEN2415B $41.90<br />
.035x.105x1/8x1-1/2 DEN2418S $38.59 DEN2418B $41.90<br />
.040x.120x1/8x1-1/2 DEN2421S $38.59 DEN2421B $41.90<br />
.045x.135x1/8x1-1/2 DEN2424S $38.59 DEN2424B $41.90<br />
.050x.150x1/8x1-1/2 DEN2427S $38.59 DEN2427B $41.90<br />
.055x.165x1/8x1-1/2 DEN2430S $38.59 DEN2430B $41.90<br />
.060x.180x1/8x1-1/2 DEN2433S $38.59 DEN2433B $41.90<br />
.065x.195x1/8x1-1/2 DEN2436S $38.59 DEN2436B $41.90<br />
.070x.210x1/8x1-1/2 DEN2439S $38.59 DEN2439B $41.90<br />
.075x.225x1/8x1-1/2 DEN2442S $38.59 DEN2442B $41.90<br />
.080x.240x1/8x1-1/2 DEN2445S $38.59 DEN2445B $41.90<br />
.085x.255x1/8x1-1/2 DEN2448S $38.59 DEN2448B $41.90<br />
.090x.270x1/8x1-1/2 DEN2451S $38.59 DEN2451B $41.90<br />
.095x.285x1/8x1-1/2 DEN2454S $38.59 DEN2454B $41.90<br />
.100x.300x1/8x1-1/2 DEN2457S $38.59 DEN2457B $41.90<br />
.105x.315x1/8x1-1/2 DEN2460S $38.59 DEN2460B $41.90<br />
.110x.330x1/8x1-1/2 DEN2463S $38.59 DEN2463B $41.90<br />
.115x.345x1/8x1-1/2 DEN2466S $38.59 DEN2466B $41.90<br />
.120x.360x1/8x1-1/2 DEN2469S $38.59 DEN2469B $41.90<br />
2 flute standard length milling burs for<br />
faster cutting speeds<br />
4 flute standard length milling burs for<br />
superb rigidity<br />
7
<strong>Milling</strong> <strong>Burs</strong> (for use on all popular CAD/CAM milling machines, including implant restoration applications)<br />
Coated <strong>Milling</strong> <strong>Burs</strong><br />
OD x LOC x Shank x OAL LOP Flutes SQ PowerA PowerDLC Ball PowerA PowerDLC Corner Radius PowerA PowerDLC Coated <strong>Milling</strong><br />
1/64x3/64x1/8x2 3/64 2 DEN2000S $61.74 $69.46 - - - - - -<br />
burs, ideal for<br />
1/64x3/64x1/8x2<br />
1/32x3/32x1/8x2<br />
1/32x3/32x1/8x2<br />
1/32x3/32x1/8x2<br />
3/64x9/64x1/8x2<br />
5/32<br />
3/32<br />
5/16<br />
1/2<br />
9/64<br />
2<br />
2<br />
2<br />
2<br />
2<br />
DEN2003S<br />
DEN2006S<br />
DEN2009S<br />
DEN2012S<br />
DEN2015S<br />
$61.74<br />
$61.74<br />
$61.74<br />
$61.74<br />
$61.74<br />
$69.46<br />
$69.46<br />
$69.46<br />
$69.46<br />
$69.46<br />
-<br />
DEN2006B<br />
DEN2009B<br />
DEN2012B<br />
DEN2015B<br />
-<br />
$67.25<br />
$67.25<br />
$67.25<br />
$67.25<br />
-<br />
$74.97<br />
$74.97<br />
$74.97<br />
$74.97<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
cutting zirconia,<br />
titanium and<br />
other difficult to<br />
machine<br />
3/64x9/64x1/8x2 5/16 2 DEN2018S $61.74 $69.46 DEN2018B $67.25 $74.97 - - - materials<br />
8<br />
3/64x9/64x1/8x2 1/2 2 DEN2021S $61.74 $69.46 DEN2021B $67.25 $74.97 - - -<br />
3/64x9/64x1/8x2 3/4 2 DEN2024S $61.74 $69.46 DEN2024B $67.25 $74.97 - - -<br />
1/16x3/16x1/8x2-1/2 3/16 2 DEN2027S $61.74 $69.46 DEN2027B $67.25 $74.97 DEN2027R.010 $89.30 $97.02<br />
1/16x3/16x1/8x2-1/2 3/8 2 DEN2030S $61.74 $69.46 DEN2030B $67.25 $74.97 DEN2030R.010 $89.30 $97.02<br />
1/16x3/16x1/8x2-1/2 1/2 2 DEN2033S $61.74 $69.46 DEN2033B $67.25 $74.97 DEN2033R.010 $89.30 $97.02<br />
1/16x3/16x1/8x2-1/2 .650 2 DEN2036S $61.74 $69.46 DEN2036B $67.25 $74.97 DEN2036R.010 $89.30 $97.02<br />
1/16x3/16x1/8x2-1/2 .800 2 DEN2039S $61.74 $69.46 DEN2039B $67.25 $74.97 DEN2039R.010 $89.30 $97.02<br />
1/16x3/16x1/8x2-1/2 1 2 DEN2042S $61.74 $69.46 DEN2042B $67.25 $74.97 DEN2042R.010 $89.30 $97.02<br />
3/32x3/16x1/8x2-1/2 3/16 4 DEN2045S $61.74 $69.46 DEN2045B $67.25 $74.97 DEN2045R.010 $89.30 $97.02<br />
3/32x3/16x1/8x2-1/2 3/8 4 DEN2048S $61.74 $69.46 DEN2048B $67.25 $74.97 DEN2048R.010 $89.30 $97.02<br />
3/32x3/16x1/8x2-1/2 1/2 4 DEN2051S $61.74 $69.46 DEN2051B $67.25 $74.97 DEN2051R.010 $89.30 $97.02<br />
3/32x3/16x1/8x2-1/2 1 4 DEN2054S $61.74 $69.46 DEN2054B $67.25 $74.97 DEN2054R.010 $89.30 $97.02<br />
2 Flute <strong>Milling</strong> <strong>Burs</strong> for use on very specific machines (Metric Sizes, call for info)<br />
OD x LOC x Shank x OAL Neck Ball Bright PowerA<br />
1x2x3x38 .78mmx14mm DEN3000B $55.13 $62.01<br />
2x2x3x38 1.6mmx14mm DEN3001B $55.13 $62.01<br />
Standard Length 2 Flute <strong>Milling</strong> <strong>Burs</strong> in Metric Sizes<br />
OD x LOC x Shank x OAL SQ PowerA Ball PowerA<br />
0.2x0.6x3x38 DEN1400S $38.59 DEN1400B $41.90<br />
0.3x0.9x3x38 DEN1403S $38.59 DEN1403B $41.90<br />
0.4x1.2x3x38 DEN1406S $38.59 DEN1406B $41.90<br />
0.5x1.5x3x38 DEN1409S $38.59 DEN1409B $41.90<br />
0.6x1.8x3x38 DEN1412S $38.59 DEN1412B $41.90<br />
0.7x2.1x3x38 DEN1415S $38.59 DEN1415B $41.90<br />
0.8x2.4x3x38 DEN1418S $38.59 DEN1418B $41.90<br />
0.9x2.7x3x38 DEN1421S $38.59 DEN1421B $41.90<br />
1x3.0x3x38 DEN1424S $38.59 DEN1424B $41.90<br />
1.5x5.0x3x38 DEN1427S $38.59 DEN1427B $41.90<br />
2.0x6.0x3x38 DEN1430S $38.59 DEN1430B $41.90<br />
Same high quality milling<br />
burs in Metric Sizes
<strong>Milling</strong> <strong>Burs</strong> (Cont.)<br />
Standard Length 4 Flute <strong>Milling</strong> <strong>Burs</strong> in Metric Sizes<br />
OD x LOC x Shank x OAL SQ PowerA Ball PowerA<br />
0.2x0.6x3x38 DEN1600S $38.59 DEN1600B $41.90<br />
0.3x0.9x3x38 DEN1603S $38.59 DEN1603B $41.90<br />
0.4x1.2x3x38 DEN1606S $38.59 DEN1606B $41.90<br />
0.5x1.5x3x38 DEN1609S $38.59 DEN1609B $41.90<br />
0.6x1.8x3x38 DEN1612S $38.59 DEN1612B $41.90<br />
0.7x2.1x3x38 DEN1615S $38.59 DEN1615B $41.90<br />
0.8x2.4x3x38 DEN1618S $38.59 DEN1618B $41.90<br />
0.9x2.7x3x38 DEN1621S $38.59 DEN1621B $41.90<br />
1x3.0x3x38 DEN1624S $38.59 DEN1624B $41.90<br />
1.5x5.0x3x38 DEN1627S $38.59 DEN1627B $41.90<br />
2.0x6.0x3x38 DEN1630S $38.59 DEN1630B $41.90<br />
Necked and Coated <strong>Milling</strong> <strong>Burs</strong> in Metric Sizes<br />
OD x LOC x<br />
Shank x OAL LOP Flutes SQ PowerA PowerDLC Ball PowerA PowerDLC<br />
Corner Radius<br />
0.20 PowerA PowerDLC<br />
Corner Radius<br />
0.50 PowerA PowerDLC<br />
0.5x1.5x3x38 1.5 2 DEN1200S $56.23 $63.95 - - - - - - - - -<br />
0.5x1.5x3x38 4 2 DEN1203S $56.23 $63.95 - - - - - - - - -<br />
0.6x1.8x3x38 1.8 2 DEN1206S $56.23 $63.95 - - - - - - - - -<br />
0.6x1.8x3x38 5 2 DEN1209S $56.23 $63.95 - - - - - - - - -<br />
0.8x0.8x3x38 2.4 2 - - - DEN1210B $65.05 $72.77 - - - - - -<br />
0.8x0.8x3x38 7 2 - - - DEN1211B $65.05 $72.77 - - - - - -<br />
0.8x2.4x3x38 2.4 2 DEN1212S $56.23 $63.95 - - - - - - - - -<br />
0.8x2.4x3x38 7 2 DEN1215S $56.23 $63.95 - - - - - - - - -<br />
1x3x3x50 3 2 DEN1218S $56.23 $63.95 DEN1218B $65.05 $72.77 DEN1218R0.2 $78.28 $86.00 - - -<br />
1x3x3x50 6 2 DEN1221S $56.23 $63.95 DEN1221B $65.05 $72.77 DEN1221R0.2 $78.28 $86.00 - - -<br />
1x3x3x50 10 2 DEN1224S $56.23 $63.95 DEN1224B $65.05 $72.77 DEN1224R0.2 $78.28 $86.00 - - -<br />
1x3x3x38 14 2 - - - DEN1227B $65.05 $72.77 - - - - - -<br />
1x3x3x50 16 2 DEN1230S $56.23 $63.95 DEN1230B $65.05 $72.77 DEN1230R0.2 $78.28 $86.00 - - -<br />
1x3x3x50 20 2 DEN1233S $56.23 $63.95 DEN1233B $65.05 $72.77 DEN1233R0.2 $78.28 $86.00 - - -<br />
2x6x3x50 6 4 DEN1236S $56.23 $63.95 DEN1236B $65.05 $72.77 DEN1236R0.2 $78.28 $86.00 DEN1236R0.5 $78.28 $86.00<br />
2x6x3x50 10 4 DEN1239S $56.23 $63.95 DEN1239B $65.05 $72.77 DEN1239R0.2 $78.28 $86.00 DEN1239R0.5 $78.28 $86.00<br />
2x6x3x50 16 4 DEN1242S $56.23 $63.95 DEN1242B $65.05 $72.77 DEN1242R0.2 $78.28 $86.00 DEN1242R0.5 $78.28 $86.00<br />
2x6x3x50 20 4 DEN1245S $56.23 $63.95 DEN1245B $65.05 $72.77 DEN1245R0.2 $78.28 $86.00 DEN1245R0.5 $78.28 $86.00<br />
2.5x7x3x38 20 2 - - - DEN1248B $65.05 $72.77 - - - - - -<br />
2 Flute Necked <strong>Milling</strong> <strong>Burs</strong> in Metric Sizes<br />
OD x LOC x Shank<br />
x OAL<br />
LOP SQ PowerA Ball PowerA<br />
Corner Radius<br />
0.20<br />
PowerA<br />
0.5x1x4x50 - DEN1000S $45.20 - - - -<br />
0.5x1x4x50 4 DEN1003S $45.20 - - - -<br />
1x2x4x50 6 DEN1006S $45.20 DEN1006B $51.82 - -<br />
1x2x4x50 10 DEN1009S $45.20 DEN1009B $51.82 - -<br />
1.5x3x4x50 10 DEN1012S $45.20 DEN1012B $51.82 - -<br />
1.5x3x4x50 14 DEN1015S $45.20 DEN1015B $51.82 - -<br />
2x4x4x50 10 DEN1018S $45.20 DEN1018B $51.82 DEN1018R0.2 $67.25<br />
2x4x4x50 14 DEN1021S $45.20 DEN1021B $51.82 DEN1021R0.2 $67.25<br />
Coated<br />
<strong>Milling</strong><br />
burs, ideal<br />
for cutting<br />
zirconia,<br />
titanium<br />
and other<br />
difficult to<br />
machine<br />
materials<br />
9
10<br />
EuroCut Bur Series<br />
Introducing... our newest versions of the most popular Dental Lab <strong>Burs</strong><br />
TriCut<br />
Custom tools available with print or tool samples. Ask us for a quote!<br />
Flexo <strong>Burs</strong> for Flexible Partials<br />
Part ID OD x LOC x Shank x OAL Cone Radius Bright PowerA PowerT PowerZ<br />
DENFP1 9/32x9/16x.0925x2-3/32 15° $35.00 $42.00 $42.00 $42.00<br />
DENFP2 15/64x9/16x.0925x2-3/32 - $35.00 $42.00 $42.00 $42.00<br />
DENFP3 5/32x1/2x.0925x2 11° $35.00 $42.00 $42.00 $42.00<br />
DENFP4 5/32x1/2x.0925x2 - $35.00 $42.00 $42.00 $42.00<br />
DENFP1 DENFP2 DENFP3 DENFP4<br />
Shape and Cut OD x LOC x Shank x OAL Part ID Uncoated Coated<br />
073 Fine Double Cut 2.3x4.2x2.35x42.2 DEN073FXC/023 $19.85 $29.65<br />
079 Extra-Course Double Cut 5x13x2.35x51 DEN079XXC/050 $25.81 $36.75<br />
079 Extra-Course Double Cut 7x14x2.35x52 DEN079XXC/070 $25.81 $36.75<br />
079 Course Double Cut 7x14x2.35x52 DEN079CXC/070 $19.85 $29.65<br />
079 Course Double Cut 6x14x2.35x52 DEN251CXC/060 $19.85 $29.65<br />
251 Double Cut 6x14x2.35x52 DEN251XC/060 $19.85 $29.65<br />
251 Fine Double Cut 6x14x2.35x52 DEN251FXC/060 $19.85 $29.65<br />
295 Double Cut 2.3x15x2.35x50 DEN295XC/023 $19.85 $29.65<br />
295 Fine Double Cut 2.3x15x2.35x50 DEN295FXC/023 $19.85 $29.65<br />
351 Course Double Cut 7x13x2.35x51 DEN351CXC/070 $19.85 $29.65<br />
351 Double Cut 7x13x2.35x51 DEN351XC/070 $19.85 $29.65<br />
351 Fine Double Cut 7x13x2.35x51 DEN351FXC/060 $19.85 $29.65<br />
EDP# (Metric) OD x LOC x Shank x OAL Price<br />
101-1063 .0925x.450x.0925x1-3/4 $26.00<br />
• For flexible partials that are easier to<br />
adjust and polish<br />
• <strong>Burs</strong> feature accurately defined and<br />
finely spaced chipbreakers<br />
• Unique geometry :<br />
• creates smaller material flows<br />
• allows air to move through the<br />
tool efficiently<br />
• results in less loading and<br />
decreased heat build up<br />
For coated burs use one of the following extensions:<br />
-PA for PowerA<br />
-PT for PowerT<br />
-PZ for PowerZ<br />
Created with popular flute geometries and using <strong>Mastercut</strong> <strong>Tool</strong> <strong>Corp</strong>.’s top quality<br />
craftsmenship, these burs adhere to the international standards of our industry.<br />
• Unique geometry and smooth surface causes a minimal amount<br />
of friction with no clogging<br />
•Special PowerZ coating reduces heat allowing for faster, longer<br />
usage and an extended cutting capacity even after prolonged use<br />
• Affords increased hardness and wearing ability
Diamond Discs<br />
Coarse Codes:<br />
Coarse = 42<br />
Medium = 43<br />
Fine = 44<br />
Flexible - Single Sided<br />
Safe Side Up<br />
Flexible - Single Sided<br />
Safe Side Down<br />
Flexible - Double Sided<br />
Head Dia (1/10 mm) 190 220 190 220 190 220 220C<br />
Thickness (mm) = T .20 .20 .20 .20 .20 .20 .30<br />
Order No. D919A D919B D918A D918B D345A D345B D918BA<br />
Grit<br />
Price Unmounted $43.12 $43.12 $43.12 $43.12 $43.12 $43.12 $43.12<br />
Super Flexible - Double Sided<br />
Diamond Disc Part IDs:<br />
1: Begin with the Order No. 2: Indicate the grit courseness (numerical codes can be found next in the course key)<br />
3: Indicate U for unmounted or M for Mounted For Example: For a Serrated Die Separating Disc with a Dia of 450 that is<br />
mounted the part number would be D365C42M<br />
Head Dia (1/10 mm) 190 220 160 220 220 220 220<br />
Thickness (mm) = T .14 .15 .17 .17 .25 .17 .25<br />
Order No.<br />
Grit<br />
D911HEFA D911HEFB D911HA D911HB D911HC D911HFA D911HFB<br />
Price Unmounted $43.12 $43.12 $43.12 $43.12 $43.12 $43.12 $43.12<br />
InterOral Flexible -<br />
Double Sided<br />
Washer Support<br />
Flexible - Double Sided - Perforated<br />
Head Dia (1/10 mm) 080 100 220C 220 220 220<br />
Thickness (mm) = T .15 .15 .30 .15 .25 .15<br />
Order No.<br />
Grit<br />
D943A D943B D918PBA D405A D405B D605A<br />
Price Unmounted $43.12 $43.12 $43.12 $43.12 $43.12 $43.12<br />
11
12<br />
Diamond Discs (continued)<br />
Flexible - Double<br />
Sided - Serrated<br />
Double Sided - Serrated<br />
Die Separating<br />
Double Sided - Plaster<br />
Cutter<br />
Head Dia (1/10 mm) 190 220 300 450 300 880<br />
Thickness (mm) = T .15 .15 .30 .30 .30 .30<br />
Order No. D365A D365B D365C D365D D321A D321B<br />
Grit<br />
Price Unmounted $43.12 $43.12 $130.00 $138.67 $130.00 $182.00<br />
Single-Use Diamonds<br />
Disc Mandrels are $5. For ordering use Part ID DENMANDREL<br />
Shape No. 368 368 801 801 801 805 805 805 806 835 835 836 837 838 847 847 847<br />
Size (1/10 mm) 016 023 010 014 023 010 014 016 012 008 009 012 012 012 012 014 016<br />
Length (mm) 3.0 5.0 1.0 1.4 2.3 1.0 2.0 2.0 2.5 4.0 3.0 5.0 7.0 4.0 9/0.6 9/0.7 9/1.1<br />
Order No.<br />
Grit<br />
368A 368C 801A 801C 801E 805A 805B 805C 806A 835A 835B 836A 837A 838A 847A 847B 847C<br />
Shape No. 847 848 848 850 850 850 852 855 855 855 856 856 862 863 863 863 863<br />
Size (1/10 mm) 018 016 023 012 014 018 023 012 016 018 016 018 012 012 014 016 018<br />
Length (mm) 8/1.1 11/0.8 10/1.4 11/0.5 10/0.8 10/1.1 10.0 7/0.7 7/1.0 7/1.4 8/1.1 9/1.4 8.0 10.0 8.0 10.0 9.0<br />
Order No.<br />
Grit<br />
847D 848A 848C 850A 850B 850C 852A 855A 855B 855C 856B 856C 862A 863A 863B 863C 863D<br />
Shape No. 878 878K 878K 878K 879 879K 880 880 881 909 6055<br />
Size (1/10 mm) 012 014 016 018 018 018 010 012 014 035 018<br />
Length (mm) 8.0 9.0 9.0 8.0 9.0 11.0 7.0 7.0 8.0 1.1 8.0<br />
Order No.<br />
Grit<br />
878A 878KA 878KB 878KC 879B 879KA 880A 880B 881A 909A 6055A<br />
Diamond Part IDs:<br />
1: Begin with the Order No.<br />
2: Indicate the grit courseness (numerical<br />
codes can be found next in the course key)<br />
3: Indicate the Pack Size (preceded by a<br />
dash, Available pack sizes vary)<br />
For Example: For a Single-Use Diamond in<br />
Size 909 with a Super Coarse grit in a 10 pack<br />
the part number would be 909A11-10<br />
Super Coarse = 21<br />
Coarse = 22<br />
Medium = 23<br />
Fine = 24<br />
Extra Fine = 25<br />
Turbo Designed Multi-Use Diamonds are sold with the following pack sizes and prices per pack:<br />
$46.80/packs of 10<br />
$106.17/pack of 25<br />
$214.50/pack of 50<br />
$423.80/pack of 100
Multi-Use Diamonds<br />
Super Coarse = 21<br />
Coarse = 22<br />
Medium = 23<br />
Fine = 24<br />
Extra Fine = 25<br />
Shape No. 909 909 834 6055 837KR 850KR 850 850 850 855 855 855 856 856 856 856 856<br />
Size (1/10 mm) 035 043 021 018 012 018 012 014 018 012 016 018 014 016 018 021 023<br />
Length (mm) 1.1 1.3 6.0 8.0 8.0 9.0 11/0.5 10/0.8 10/1.1 7/0.7 7/1.0 7/1.4 8/0.9 8/1.1 9/1.4 8/1.6 7/1.8<br />
Order No. 909A 909B 834A 6055A 837KRA 850KRA 850A 850B 850C 855A 855B 855C 856A 856B 856C 856D 856E<br />
Grit<br />
Shape No. 847 847 847 847 848 848 848 835 835 835 835 836 837 838 880 880 881<br />
Size (1/10 mm) 012 014 016 018 016 018 023 008 009 010 012 012 012 012 010 012 014<br />
Length (mm) 9/0.6 9/0.7 9/1.1 10/1.1 11/0.8 10/1.1 10/1.4 4.0 3.0 4.0 4.0 5.0 7.0 4.0 7.0 7.0 8.0<br />
Order No. 847A 847B 847C 847D 848A 848B 848C 835A 835B 835C 835D 836A 837A 838A 880A 880B 881A<br />
Grit<br />
Shape No. 830 830 878K 878K 878K 879K 878 878 879 879 862 862 863 863 863 863 392<br />
Size (1/10 mm) 010 014 014 016 018 018 012 014 012 018 012 016 012 014 016 018 016<br />
Length (mm) 2.2 3.0 9.0 9.0 8.0 11.0 8.0 8.0 10.0 9.0 8.0 8.0 10.0 8.0 10.0 9.0 5.0<br />
Order No. 830A 830B 878KA 878KB 878KC 879KA 878A 878B 879A 879B 862A 862B 863A 863B 863C 863D 392A<br />
Grit<br />
Shape No. 852 858 859 889 801 801 801 805 805 805 806 813 811 368 368 368 379<br />
Size (1/10 mm) 023 014 023 008 010 014 023 010 014 016 012 014 033 016 018 023 023<br />
Length (mm) 10.0 8.0 10.0 3.0 1.0 1.4 2.3 1.0 2.0 2.0 2.5 2.0 4.2 3.0 5.0 5.0 4.5<br />
Order No. 852A 858A 859A 889A 801A 801C 801E 805A 805B 805C 806A 813A 811A 368A 368B 368C 379A<br />
Grit<br />
Diamond Part IDs:<br />
1: Begin with the Order No. 2: Indicate the grit courseness (numerical codes can be found next in the course key) 3: Indicate the Pack Size (preceded<br />
by a dash, Available pack sizes vary)<br />
For Example: For a Multi-Use Diamond in Size 909 with a Super Coarse grit in a 10 pack the part number would be 909A21-10<br />
Multi-Use Diamonds sold in packs of 5 at $86.87 a pack<br />
except for those with a grit courseness of Super Course/Extra<br />
Fine which are sold in packs of 5 at $103.96 per pack.<br />
13
14<br />
Lab Diamonds<br />
Shape No. 801 801 801 801 801 805 805 807 837 837 837 837 848 848 848 842R 850<br />
Size (1/10 mm) 012 014 016 023 029 018 023 016 018 023 030 040 018 023 030 018 016<br />
Length (mm) 1.5 2.0 4.0 6.0 10.0 10.0 15.0 10.0 10.0 10.0 12.0 10.0<br />
Order No. 801B 801C 801D 801E 801F 805D 805E 807A 837B 837C 837D 837E 848B 848C 848D 842RA 850D<br />
Grit<br />
Shape No. 850 856 856 856 859 860 862 863 863 898 909 825<br />
Size (1/10 mm) 023 012 021 025 018 012 025 012 014 016 055 093<br />
Length (mm) 10.0 8.0 8.0 8.0 10.0 5.0 8.0 10.0 10.0 10.5 2.0 1.5<br />
Order No. 850E 856F 856D 856G 859B 860A 862C 863A 863B 898A 909A 825A<br />
Grit<br />
Coarse = 52<br />
Medium = 53<br />
Fine = 54<br />
Turbo Designed Multi-Use Diamonds<br />
Coarse = 30<br />
Lab Diamonds sold per piece at $19.50 each except Shapes 909<br />
and 825. 909 and 825 are $30.33 each.<br />
Shape No. 368T 836T 837KRT 847T 847T 850T 850T 850KRT 855T 855T 856T 863T 880T<br />
Size (1/10 mm) 023 012 012 016 018 014 018 018 016 018 018 014 010<br />
Length (mm) 5.0 5.0 8.0 9.0 8.0 10.0 10.0 9.0 7.0 7.0 9.0 8.0 7.0<br />
Order No. 368TA 836TA 837KRTA 847TA 847TB 850TA 850TB 850KRTA 855TA 855TB 856TA 863TA 880TA<br />
Turbo Designed Multi-Use Diamonds are sold with the following pack sizes<br />
and prices per pack:<br />
$86.67/packs of 10<br />
$195.00/pack of 25<br />
Diamond Part IDs:<br />
1: Begin with the Order No.<br />
2: Indicate the grit courseness<br />
(numerical codes can be found next<br />
in the course key)<br />
3: Indicate the Pack Size (preceded<br />
by a dash, Available pack sizes vary)<br />
For Example: For a Lab Diamond in Size<br />
909 with a Coarse grit in a 10 pack the<br />
part number would be 909A52-10<br />
Turbo Diamond Part IDs:<br />
1: Begin with the Order No.<br />
2: Followed by a 30<br />
3: Indicate the Pack Size<br />
(preceded by a dash, Available<br />
pack sizes vary)<br />
For Example: For a 368T in a 10<br />
pack the part number would be<br />
368TA30-10<br />
Online Ordering<br />
Call our customer service department to set<br />
up your preferred password and to begin<br />
your convenient online ordering today.<br />
1(727) 726-5336
Notes<br />
15
Electric Handpiece Motor Set<br />
Order Number:<br />
DEN-HPMOTORSET<br />
Package Includes:<br />
• Control Box<br />
• Handpiece<br />
• Wrench<br />
• Additional<br />
Brushes<br />
• Foot Control<br />
• Handpiece<br />
Stand<br />
Accepts all HP<br />
standard burs,<br />
diamonds and<br />
mandrels<br />
Smooth, quiet and<br />
durable with true<br />
variable speed foot<br />
control!<br />
www.mastercuttool.com<br />
965 F. Harbor Lake Drive<br />
Safety Harbor, FL 34695 USA<br />
Telephone (727) 726-5336<br />
Fax (727) 725-2532<br />
dental@mastercuttool.com<br />
0-35,000 rpm Variable<br />
Speed Control<br />
Great Low Cost!<br />
Ask about ordering your favorite<br />
burs for a motor set discount!<br />
American Made, World Class Quality<br />
Wholesale and Dealer Discounts Available<br />
1 Year Warranty<br />
on the Control Box.<br />
6 Months Warranty<br />
on the Handpiece.<br />
List Price<br />
$399.00<br />
10-2011-61-FMP