MERIT JAHTI 20, 30, 80 - Temaspeed

MERIT JAHTI 20, 30, 80
PRODUCT DATA SHEET 25.05.2007
REF. NO TCF 0002
1 (2)
DESCRIPTION A one component urethane alkyd lacquer containing UV-protective agent.
EMISSION
CLASSIFICATION
PRODUCT
FEATURES AND
RECOMMENDED
USES
TECHNICAL DATA
The paint does not contain free formaldehyde and after drying it does not emit
formaldehyde to the environment.
♦ Excellent resistance to abrasion.
♦ Excellent resistance to all ordinary cleaning detergents, SFS 3755.
♦ Good resistance to solvents: gasoline, turpentine, white spirit and methylated
spirits. Does not resist e.g. thinner
♦ Resists lubricating oils and greases, animal and vegetable fats.
♦ Recommended for boats, floors, doors, windows and other wooden surfaces
both indoors and outdoors.
Solids content abt. 49 volume %, 56 weight %.
Specific gravity 0.92 kg/l.
Product code 005 0090, 005 0091 and 005 0110
Theoretical coverage 4 - 6 m 2 /l (100 μm).
Practical coverage depends on the application method, painting conditions and the
shape and roughness of the surface to be coated.
Application details Brush or sray.
Airless spray
- nozzle 0.009" - 0.013" (0.230 - 0.330 mm)
- thinning 0 - 10 vol-%
Drying times 23 ºC
Thinner Thinner 1054.
Cleaning of equipment Thinner 1054.
Dust dry, after 2 h
Dry to handle, after 6 h
Recoatable, after 24 h
Fully cured and durability properties reached within 2 weeks.
Drying and recoating times are related to the film thickness, temperature, the
relative humidity of the air and ventilation.
Gloss ISO 2813/60º 20 (005 0090)
30 - 40 (005 0110)
> 80 (005 0091)
Tikkurila Coatings Oy | P.O. Box 53 | Kuninkaalantie 1 | FIN-01301 Vantaa | Tel. +358 (0)9 857 741 | Fax +358 (0)9 8577 6911
VAT FI10694878 | Business Identity Code 1069487-8 | Registered OfficeVantaa | www.tikkurila.com

TIKKURILA COATINGS OY PRODUCT DATA SHEET 25.05.2007
REF. NO TCF 0002
2 (2)
MERIT JAHTI 20, 30, 80
APPLICATION DETAILS
Surface treatment New untreated surfaces
Remove dirt and dust.
Surfaces outdoors: prime with Valtti Base Priming Oil.
Finewood surfaces: wash with Thinner 1054.
Previously treated surfaces
Wash the surface with FONTECLEAN AL detergent and rinse thoroughly with water.
Remove old loose lacquer with scraper. Sand the whole surface and remove sanding
dust.
Application Stir the lacquer carefully before use. For priming new untreated surfaces thin the
lacquer about 20 - 40 % with Thinner 1054. Brush evenly a thin layer 2 - 3 times. Thin
top laqcuer 0 - 20 % if necessary. Varnish previously treated surfaces directly with
unthinned lacquer 1 - 2 times. Sand the surface lightly after each coat.
Note! Priming of exterior objects must always be done with high gloss MERIT
JAHTI.
Application conditions The surface to be treated has to be dry i.e. the moisture content of the timber has to be
below 20 %. During application and drying the temperature of the air has to be at least
+ 5 ºC and the relative humidity of the air below 80 %.
Do not apply the lacquer under direct sunlight or during moist and cold weather. Time
varnishing so that the lacquer film has enough time to dry before the evening dew.
VOC The Volatile Organic Compounds amount is 390 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 514 g/l.
HEALTH AND SAFETY Containers are provided with safety labels, which should be observed. Further
information about hazardous influences and protection are detailed in individual health
and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Coatings Oy.
lilti120506/tmk250507/005 0090, 0091, 0110
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data
sheet. When necessary verify the validity of the product data sheet. The quality of the product is ensured by our operational system, based on
the requirements of the standards ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using
the product against our instructions or for inappropriate purposes.