Electromechanical products Compabloc 1000

A
A1.16
Electromechanical products
Compabloc 1000
Load on slow speed shaft
For this type of product the permissible load on the slow speed shaft depends on the speed of rotation and the transmitted torque but not on
the reduction.
Force in N.m.
Gearbox characteristics Clockwise or anti-clockwise direction
Speed min -1 Max. torque N.m F r F a + F a -
400 16 1296 618 645
300 15 1464 730 757
300 20 1399 677 713
200 22 1613 832 871
200 33 1465 719 781
150 22 1802 893 1021
150 33 1651 869 934
150 45 1404 838 929
100 22 1900 1435 1485
100 33 1800 1274 1347
100 45 1710 1077 1172
75 22 1900 1936 1990
75 33 1800 1768 1843
75 45 1710 1563 1660
50 22 1900 2838 2902
50 33 1800 2663 2756
50 45 1710 2441 2570
≤ 40 22 1900 3040 3040
≤ 40 33 1800 2995 2995
≤ 40 45 1710 2800 2800
F r = radial force on the shaft end at 20 mm from the shoulder.
Direction of force
Fa + = PULLING axial force on shaft end.
F a - = PUSHING axial force on shaft end.
Note : These values correspond to the most adverse load conditions.
SPECIAL CASES : please consult Leroy Somer.
Cb 1502
= =
Fr
Fa