AMIAD Automatic Filters Filtomat M100-6800 Series Models - Netafim

More documents

Recommendations

Info

F 5. Depending on the actual diameter of your filter use two units of Amiad’s Screen Separation Tool (Catalog Number 65-9999-0203 for 2‖-8‖, 65-9999-0204 for 10‖-12‖ or 65-9999-0205 for 14‖-16‖ filters) to separate the Chamber Flat Screen and the Dirt Collector from the Fine Screen. Filtomat M100-6800 10.2009 Page 16 of 24
Re-installing the Screen and the Dirt Collector 1. Insert the Dirt Collector to the Fine Screen. Make sure that the first suction nozzle of the Dirt Collector (A) is pointing downwards when inserted into the Fine Screen. 2. Use the two Amiad’s Screen Separation Tools to reconnect the Chamber Flat Screen and the Fine Screen. 3. Insert the fine screen back to the filter housing (A). Use the fork part of the Push Pull Tool to lift the screen and push it through the last few centimeters till it is correctly seated in the filter housing (B). Filtomat M100-6800 10.2009 Page 17 of 24 A A
Page 1 and 2: AMIAD Automatic Filters Filtomat M1
Page 3 and 4: TABLE OF CONTENTS Specifications
Page 5 and 6: SAFETY INSTRUCTIONS General � Car
Page 7 and 8: INTRODUCTION The FILTOMAT M100-6800
Page 9 and 10: INSTALLATION Read these instruction
Page 11 and 12: TROUBLESHOOTING Problem Possible Ca
Page 13 and 14: SERVICING Draining the Filter 1. Cl
Page 15: D Filtomat M100-6800 10.2009 Page 1
Page 19 and 20: PARTS SCHEDULE No. Description Cat.
Page 21 and 22: PARTS DRAWING #2 Filtomat M100-6800
Page 23 and 24: PARTS DRAWING #4 Filtomat M100-6800

AMIAD Automatic Filters Filtomat M100-6800 Series Models - Netafim

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?