RSP Series

More documents

Recommendations

Info

• UL1598 suitable for Wet Locations. Round Spectra-Lyte Garage Luminaire for HID, RSP SP HID Unit • 200-70W HID • 4x42W, 4x32W, 4x26W, 2x42W, 2x57W CF • 165W, 85W QL • Parking Garages • Canopies • Covered Walkways • Low Soffits • HID unit constructed to IP54, CF/QL unit constructed to IP52 CF and QL Sources • Optional IP65 construction available with Pendant Mounting • Controlled Downlight and Uplight Component • Suitable For Low Ceilings and Shallow Viewing Angles • Additional Down Light Option Available, Useful for Garage Entrance Zones • Bi-Level® Dimming Available for HID Units • RSP-LF Option for HID Units Provides Uniform Photometric Performance with 55W HO Circline Fluorescent Auxiliary Lamp Emergency Systems • Emergency Battery Backup Options Available for CF Units • Asymmetric Sheilding Available CF/QL Unit • Mounting Options include: • Standard Easy Hanger Plate for Mounting to Junction Box • Pendant Mounting to 3/4” Rigid Conduit with Threaded Hub • Direct Surface Mount with Feed-Through Wiring • Architectural Styling P.O. Box 606 • San Marcos TX 78667-0606 • (512) 392-5821 • Fax (512) 753-1122 HID Unit Square Spectra-Lyte Garage Luminaire for HID and CF Sources • UL1598 suitable for Wet Locations, both HID and CF unit constructed to IP54 • 175-70W HID • 2x42W, 2x57W CF • Parking Garages • Canopies • Covered Walkways • Low Soffits • Both HID and CF unit constructed to IP54 • Controlled Downlight and Uplight Component • Suitable For Low Ceilings and Shallow Viewing Angles • No UpLight Option Available, for Shielding of Upper Lens Aperture • Bi-Level® Dimming Available for HID Units • Electronic Dimming Ballast Available for CF Units • Asymmetric Sheilding Available CF Unit • Mounting Options include: • Standard Easy Hanger Plate for Mounting to Junction Box • Pendant Mounting to 3/4” Rigid Conduit with Threaded Hub • Direct Surface Mount with Feed-Through Wiring • Architectural Styling ® 39
OP Series Optra Area Luminaire Type: Job: Optra Arm Mount on 5” Round Pole 50.5” (128.27cm) applications 36.0” (91.44cm) Architectural Site Lighting Parking Lots Optra Post Top Mount on 4” Round Pole 42.1” (106.96cm) 28.6” (72.64cm) 36.0” (91.44cm) 40 Specifications and dimensions are subject to change without notice. Catalog Number: - - - - - Plazas SERIES DISTRIBUTION VOLTAGE MOUNTING OPTIONS FINISH 13.3” (33.66cm) EPA (Effective Projected Area in Ft 2) For Architectural Outdoor options, finish choices and accessories, see pages 72 - 76. Post Top 2.07 ACCESSORIES Specifications Housing Die-cast aluminum housing construction. All hardware shall be corrosion resistant. The OptraTM shall consist of a separate ballast housing and optical housing ensuring cooler operation and significantly longer component and unit life. Standard optic chamber constructed to IP65. Full Cutoff Optical System Revolutionary optics design incorporates the advantages of vertical lamping with an innovative inverse conical lens (patent pending) to provide compliance with IES Full Cutoff definition in addition to unrivaled photometric performance. Optical lens employs collimating lens technology to capture and focus uncontrolled lumens back into the main beam while masking arc tube glare. Multi-faceted segmented reflectors shall be made of high purity, anodized “Super Sheet” aluminum with an inorganic dielectric coating, producing a minimum reflectivity of 94% for optimum efficiency. The optical head is equipped with an electrical disconnect and is fully gasketed to ensure Dust-Tite construction for higher maintained light levels. Symmetric pattern provides excellent spacing to mounting height ratios with very low glare. Asymmetric pattern provides directional spill light control, useful for perimeter areas. Luminaire is Dark Sky Ordinance compliant. Lamp Access Top of the fixture hinges open to provide tool-less lamp access and relamping. Lens Precision manufactured fully tempered inverse conical glass lens, in conjunction with the collimating optic lens, exceeds limitations of sag glass lens photometrics, which can provide no better than cutoff performance. Ballast Separate but integral ballast shall be high power factor with reliable starting at temperatures as low as -29°C (-20°F) for Metal Halide, -34°C (-30°F) for Pulse Start Metal Halide, and -40°C (-40°F) for High Pressure Sodium. Crest factor does not exceed 1.8. Ballast has Class H, 180°C (356°F) rated insulation system. Ballast module shall be tool-less for ease of installation and service. Mounting Fixture is constructed for one-person installation. Field installed surface arm mount shall be of die-cast aluminum. Mounting arm with integral ballast tray assembly shall be used to bolt fixture to a 4” to 5” OD round or 4” to 6” square pole. Post top mount allows fixture mounting to a 2-3/8” OD x 4” vertical tenon on a 4”, 5” or 6” round or square pole. Finish Standard finish shall be Textured Satin Aluminum UltraClad polyester powder coating, 2.5 mil nominal thickness, electrostatically applied and oven cured to ensure extreme durability. Other colors may be specified. Listings UL/cUL Listed luminaire, UL 1598, suitable for Wet Locations. The quality systems of this facility have been registered by UL to the ISO 9001 Series Standards. Warranty / Terms and Conditions Standard 5 Year Limited Warranty Wide-Lite's current Warranty may be found at www.wide-lite.com (keyword: warranty) as well as Wide-Lite's current Standard Terms and Conditions of Sale (keyword: terms). All sales of items in this catalogue shall be subject to Wide-Lite's Standard Terms and Conditions of Sale current at the time of shipment. If you do not have a copy of Wide-Lite's Warranty and Standard Terms, please contact the factory for same prior to ordering. www.wide-lite.com CATALOG KEYWORD: OP Arm Mount 1 @ 90° 1.38 2 @ 90° 2.76 2 @ 180° 2.76 3 @ 120° 3.39 3 @ 90° 3.79 4 @ 90° 3.95 Wide-Lite P.O. Box 606 • San Marcos TX 78667-0606 (512) 392-5821 • Fax (512) 753-1122
Page 1 and 2: Architectural Outdoor (continued on
Page 3: Architectural Outdoor (continued) s
Page 7 and 8: EAL Series Area Luminaire Type: Job
Page 9 and 10: EWL Series Wall Luminaire Type: Job
Page 11 and 12: AL2 Series Spectra II Area Luminair
Page 13 and 14: AL3 Series Spectra III Area Luminai
Page 15 and 16: AL4 Series Spectra IV Area Luminair
Page 17 and 18: AL2R Series Spectra II Round Area L
Page 19 and 20: AL3R Series Spectra III Round Area
Page 21 and 22: MSL Series Mini Square Supra-Lyte A
Page 23 and 24: SL Series Square Supra-Lyte Area Lu
Page 25 and 26: RMSL Series Mini Round Supra-Lyte A
Page 27 and 28: RSL Series Round Supra-Lyte Area Lu
Page 29 and 30: S10 Series Spectra Ten Area Luminai
Page 31 and 32: XL Series Excel-Lyte Area Luminaire
Page 33 and 34: RSP Series Round Spectra-Lyte Garag
Page 35 and 36: SP Series Square Spectra-Lyte Garag
Page 37 and 38: section 2 Architectural Outdoor Opt
Page 39 and 40: section 2 Architectural Outdoor Arc
Page 41 and 42: section 2 Architectural Outdoor Acc

RSP Series

Create successful ePaper yourself

Delete template?

Save as template?