Electric assembly tools and systems

screw size M1 – M4
torque range 0.03 – 3.4 nm
The Eliza electric screwdrivers are the
ideal choice in the electronic industry,
among small components manufacturers,
the appliance industry and other industries
where cleanliness in operation,
ease of installation, low noise level and
limited total investment are essential.
l ergonomic – Soft touch grip, low
weight, small dimensions, perfect balance,
a minimum of vibration and reaction
force.
l accurate – Combined mechanical
clutch and electric shut-off provides for
excellent torque repeatability.
l High productivity – Careful balance
between speed and torque, electrically
and mechanically dimensioned for
continuous production, meet the highest
demands for production rate and
service life.
l ESD certified – Dissipative plastic casing
and electric connection of the tool
body to ground potential prevent static
electricity from being built up in or on
the face of the tool and discharge to
sensitive electronic components.
l safe – Via a transformer the tools are
powered by a mere 30 VDC, which
means that there is no risk for dangerous
electric chock in operation or during
service and maintenance.
74
eleCtrIC sCreWdrIVers
Eliza – Clutch type
l soft stop options – This model features
a modified clutch and gear package
for those applications where shock
sensitive electronic devices might
be harmed by the vibrations from the
clutch action. The smooth shut-off also
reduces the jerk to the hand of the operator.
torque range Free Weight
screw soft joint speed length Bit
Model capacity nm in lb r/min kg lb mm drive Ordering no.
trigger start screwdrivers (excl. control box)
ELI006 M1.0-2.0 0.03 - 0.2 0.3 - 1.7 1000 0.35 0.8 183 Ø 4 mm 8431 0156 06
ELI06 M1.2-2.5 0.05 - 0.5 0.4 - 4.4 1000 0.38 0.8 197 1/4 hex 8431 0156 00
ELI16 M2-3 0.15 - 1.6 1.3 - 14 825 0.6 1.4 235 1/4 hex 8431 0156 18
ELI26 M2.5-4 0.3 - 2.5 2.6 - 22 700 0.7 1.5 255 1/4 hex 8431 0156 26
ELI36 M2.5-4 0.4 - 3.4 3.5 - 30 700 0.6 1.4 235 1/4 hex 8431 0156 34
Push start screwdrivers (excl. control box)
ELI16-P M2-3 0.15 - 1.6 1.3 - 14 825 0.6 1.4 235 1/4 hex 8431 0156 42
ELI26-P M2.5-4 0.3 - 2.5 2.6 - 22 700 0.7 1.5 255 1/4 hex 8431 0156 59
ELI36-P M2.5-4 0.5 - 1.8 4.3 - 16 1500 0.6 1.4 235 1/4 hex 8431 0156 63
soft-stop screwdrivers with trigger start (excl. control box)
ELI06-SS M1.4-2.5 0.1 - 0.44 0.9 - 3.9 1000 0.4 0.9 197 1/4 hex 8431 0156 67
ELI16-SS M2-3 0.25 - 1.3 2.2 - 11 825 0.6 1.4 235 1/4 hex 8431 0156 75
ELI26-SS M2.5-3 0.5 - 1.7 4.4 - 15 700 0.7 1.5 255 1/4 hex 8431 0156 83
Control boxes ESD certified
CBE50 Controller for single ELI006, 06, 16 or 26 models 8431 0164 09
CBE65 Controller for single ELI36 models 8431 0164 17
CBE50-S Slow start controller for single ELI006, 06, 16 or 26 models 8431 0164 25
transformers
PFS60-ESD For single ELI006, 06, 16 or 26 models – 230/22 V. ESD certified 8431 0160 11
PFS60-ESD-115 For single ELI006, 06, 16 or 26 models – 115/22 V. ESD certified 8431 0160 13
PFS151 For ELI36 models and power network – 230/22 V. Not ESD certified ab 8431 0160 15
PFS151-115 For ELI36 models and power network – 115/22 V. Not ESD certified ab 8431 0161 15
HT150 "High Tension" transformer – 230/24 V. Not ESD certified abc 8431 0161 24
Power packages ESD certified
CTB50 Transformer and controller for single ELI006, 06, 16 or 26 models 8431 0162 01
CTB65 Transformer and controller for single ELI36 models 8431 0162 19
CTB100 Transformer and controller for two ELI006, 06, 16 or 26 models 8431 0162 27
a In EPA (Electrostatic Protected Area) use power package CTB65 for ELI36 or distantly placed HT150.
b PFS151 has double socket connection.
c Use HT150 to compensate for voltage drop due to long distance between transformer and controller.
Acceleration
120
100
80
60
40
20
0
0
2000
Shock Response Spectrum
4000
6000
Frequency
ELI16
ELI16SS
8000
10000