Electric assembly tools and systems
Electric assembly tools and systems
Electric assembly tools and systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
66<br />
ELECTRIC ASSEMBLY TOOLS<br />
Tool key<br />
The tool key below explains the significance of the letters/numbers forming the name of the tool model.<br />
Battery screwdriver – ETB<br />
B = Battery<br />
powered<br />
Battery screwdriver,<br />
pistol grip<br />
ETB<br />
T = Shut-off<br />
B T V<br />
V = Right angle<br />
D = In-line<br />
Torque (Nm)<br />
i = torch lights<br />
L = low speed<br />
6i<br />
Battery screwdriver – BTV<br />
<strong>Electric</strong> shut-off<br />
ETD = In line<br />
ETV = Right angle<br />
ETP = Pistol<br />
Torque (Nm)<br />
28<br />
<strong>Electric</strong> screwdriver – EBL<br />
<strong>Electric</strong> brushless<br />
screwdriver,<br />
EBL<br />
Technology<br />
D = DigiTork control<br />
L = Low voltage<br />
10<br />
<strong>Electric</strong> screwdriver – MicroTorque TM<br />
ETF = Fixtured<br />
ETD = H<strong>and</strong>-held<br />
ETF<br />
Torque<br />
03<br />
M = "Digitork"<br />
MT = Transducerized<br />
MT<br />
<strong>Electric</strong> screwdriver – Tensor DL<br />
1 = Generation<br />
Torque (Nm)<br />
06 = 1/4", square drive<br />
10 = 3/8", square drive<br />
B10 = 3/8", square drive, ball retainer<br />
42 = 1/4", hex. bit drive<br />
Q = 1/4", hex. quick chuck<br />
FS10 = flush socket hex. 10 mm A/F<br />
FS13 = flush socket hex. 13 mm A/F<br />
FS5/16= flush socket hex 5/16" hex<br />
HAD = Hold <strong>and</strong> Drive<br />
SS = Soft-stop models<br />
RE = Reporting models<br />
SS<br />
Torque (Ncm)<br />
100<br />
Square drive size<br />
06 = 1/4"<br />
10 = 3/8"<br />
ETD DL 2 1 07 I 06 QC<br />
Motor size I = Female hex Option<br />
QC = Quick change chuck<br />
PS = Push-to-start
Change language