Construction Tools - Atlas Copco

Silent demolition tools
Extremely robust design
Atlas Copco combi cutters and pulverizers are designed
for hard and long-term use with high throughput
performance and loads. They can absorb high forces and
constant stresses.
Hydraulic rotation
360° hydraulic drives for infinite rotation with overload
protection are fitted as standard and provide excellent
handling. The CC 250 is equipped with a mechanical
rotation unit.
High speed valves
Powerful cylinders with speed valves offer high breaking
forces with short cycle times, thus enabling rapid progress
and high productivity.
Practical wear part concept
All products are fitted with easy-to-replace wear parts
which can be renewed on site using simple tools. This
helps to minimize service and maintenance downtimes.
Two moving jaws concept
Atlas Copco combi cutters are equipped with the proven
system of two moving jaws, each powerd by its own
hydraulic cylinder. This offers constantly high breaking
force over the entire breaking cycle.
CAPS (Coupling And Positioning System)
Thanks to CAPS, the two cutter jaws of Atlas Copco
combi cutters (from CC 1700 upwards) can be fitted and
removed as a modular unit. CAPS connects the jaws
even after they have been removed and facilitates refitting
through a special guide system. This makes it easy to
replace the jaws quickly on site.
120