AtlAsAutomotive Equipment

truck adapter Set
This two piece set consists of
a double sided center cone for
wheel centers up to 7 inches and a
spacer to help prevent wheels from
contacting the side of the balancer.
Fits 40mm shafts.
Universal adapter
Motorcycle
adapter Kits
The Atlas MC adapter kit and the
Atlas MC-XLT kit convert your Atlas
computer wheel balancer into a
motorcycle wheel balancer.
Kit Hub Assembly Max Width
MC Kit 9 1/4”
MC-XLT Kit 13 3/4” (1’ 1 3/4”)
Wheel Balancer Accessories
Spoke Support adapter (SSa)
The Atlas SSA allows the operator
to “leave on” some of the wheel
accessories found on custom bike
rear wheels. Many of these wheel
accessories need to be removed
from the wheel when using the “pad”
system included with the Atlas M/C kit
and the Atlas M/C-XLT kit.
Atlas Universal Adapter (UA) is
designed for wheels that have either a
closed center or wheels that are made
without a “true center” and classified
as “lug-centric.”
Most GMC ® SUVs and custom wheels
are “lug-centric.” Fits 40mm shafts.
The spacer is designed to keep the wheel assembly
away from the machine so that the rubber does not
contact the balancer when the assembly is spinning
Cam
Lug Nuts
MC Kit
Shown
32 | www.atlasautoequipment.com
Cam
Allen Bolt
2-Sided Cone Allows Wheel
Assemblies With Center Holes
Between 4 7/8” - 7” To Be
Properly Mounted On Wheel
Balancer Shaft
Measuring
Allen
Wrench
Caliper
Cone
Multiple Plate
Locations
Accomodate
Any Wheel
Diameter
Lug Nut Wrench
with Handle
Optional Storage Case
Size of Motorcycle
Tire Shown:
200/55-R18
Specifications Subject to Change. We are Not Responsible for Misprints.
Adapter Bolts Securely to Balancer Hub
Foam Pads
(Colors May Vary)
Large Cones Small Cones Spacers
2-Sided
Cone
This Wheel Configuration
is Commonly Found on
1-Ton Trucks (and up)
Universal Adapter Mounted On Balancer
Flanges
Cam
Mounting
Special
Bolt
Lug Nuts
Cone
Mounting
Bolt
Wing Nut