AtlAsAutomotive Equipment

Wireless Rear
Sensors
Sensor Control Panel
Wireless Front Sensors
Edge 801 With Bluetooth® Wireless Sensors
and FastClamp Wheel Clamps
Features Bluetooth ® wireless data transmission and is customized for all truck axle
configurations – 2, 3, 4 and 5 axle configurations. This system combines blazing speed,
precision accuracy, and reliable Bluetooth ® wireless communication all at a very affordable
cost. It is PC Driven using high quality components and prints detailed alignment reports,
then stores these reports on its hard drive for future retrieval. The Atlas 801 Truck FastClamp
system allows the operator to perform alignments on a level floor without the need for a truck
lift. Truck FastClamps require no lateral run-out compensation, so accurate measurements are
obtained immediately.
Operator Pushes Four
Color Coded Arrow
Buttons On Each
Sensor To Navigate
The Entire Program.
Sensors Tell Operator if Angle
is Within Specifications,
Making a Rear Remote
Unnecessary
FastClamp Wheel Clamps
Precision accuracy is the result of the proper relationship
between the reference point, the measuring sensors, and the
software data. The patented FastClamp system assures the
operator of the most accurate reference possible.
The FastClamp fastens to the wheel by “gripping the tire.”
There is no need for any type of “roll-back” procedure and zero
run-out is attained (IMMEDIATELY). Lipless wheels and
dual wheel trucks are absolutely “no-problem.”
FastClamps are available for passenger and light truck
wheels and for over the road semi wheels.
Alignment Machines
FeAtures
• Bluetooth ® Wireless Data
Transmission
• 35”-50” Non Runout 3 Point
FastClamp Wheel Clamp.
• Premium Cabinetry With
Head Charging.
• Lightweight (8 lb.) Sensor
Heads.
Specifications Subject to Change. We are Not Responsible for Misprints.
• Printer, 19” LCD Display,
Keyboard.
• Data Filing Stores Millions Of
Printouts.
• Premium Software Including
Help Images, Trailer Program,
Multi Axles, Busses And
Coaches, And Light Trucks.
• Shipping Weight: 400 lb.
Super Accurate Bluetooth ® Wireless
Meaure the Front and Rear Camber and
Toe (with Thrust) Automatically.
alignment Calibration Bar
The Atlas calibration fixture system allows the owner of an Atlas
101, 201 or 601 computer alignment machine to perform sensor
calibration procedures in his shop. The Atlas calibration system is
easy to use and takes less than 15 minutes to calibrate all four
sensor heads. The entire calibration procedure is included in the
software and the step-by-step (on screen) instructions are easy to
view and understand.
www.atlasautoequipment.com | 35