Wire weaving machines BD520, BD600, BD800 - Schlatter

More documents

Recommendations

Info

8 Technical data Standard weaving width special widths on request Wire diameter Square mesh screens meshes per inch (25.4 mm) Dutch weave meshes per inch (25.4 mm) Wire material Number of picks (depending on weaving width and fabric specification) Basic tension Specification BD520, BD600 and BD800 are flexible wire weaving machines for the efficient production of highest-quality fabrics. BD520 1300 mm 1600 mm 2100 mm 2500 mm 0.05 –0.45 mm 15 –200 up to 300 stainless steel, iron, copper, brass, bronze, aluminum, platinum 180 1/min 2000 daN/m BD600 1300 mm 1600 mm 2100 mm 2500 mm 3500 mm 0.1– 0.8 mm 10 –100 up to 300 stainless steel, iron, copper, brass, bronze, aluminum, platinum 150 1/min 4000 daN/m BD800 2100 mm 2500 mm 3200 mm 4200 mm 0.3 –1.6 mm 4 –50 up to 250 stainless steel, iron, copper, brass, bronze, aluminum 80 1/min 8000 daN/m
Wire material • stainless steel • iron • copper • brass • bronze • aluminum • platinum Wire specification You can weave wires made of the various materials in different conditions: bank, annealed or unannealed, alloyed or unalloyed, hard or soft, smooth or twisted. 9
Page 1 and 2: Wire weaving machines BD520, BD600,
Page 3 and 4: All from one supplier The wire weav
Page 5 and 6: Fabric pattern Plain fabric, three-
Page 7: BD520 for fine fabrics: protection
Page 11 and 12: Investment protection through susta

Wire weaving machines BD520, BD600, BD800 - Schlatter

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?