Aluminium Mold Bases - DME
Aluminium Mold Bases - DME
Aluminium Mold Bases - DME
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Titel Info<br />
AFN<br />
Al 90,5<br />
Mg >2,1<br />
Mn >0,4<br />
Si >0,4<br />
Cu >1,5<br />
Fe >0,2<br />
Cr >0,18<br />
Zn >5,1<br />
Rest >0,05<br />
Ultimate tensile strength Rm 460-540 MPa<br />
Hardness 130-155 HB<br />
Density 2,80 g/cm 3<br />
Modulus of elasticity 72 GPa<br />
Thermal conductivity ± 130-160 W/m-K<br />
Coefficient of thermal expansion 23,4x10 -6 K -1<br />
Machining Information:<br />
2 - www.dmeeu.com<br />
Material - <strong>Aluminium</strong> alloy as per EN 3.4365<br />
Composition:<br />
Material characteristics:<br />
1. Locating ring to be ordered separately<br />
2. Screws M/IS 610<br />
3. Cavity plate / nozzle side<br />
4. Leader pins - K 7711<br />
5. Leader pin bushings - K 7721<br />
6. Cavity plate / moving side<br />
7. Ejector plates without boreholes<br />
8. Risers<br />
Excellent machining properties with drilling, countersinking, milling, tapping and turning. Conventional HSS-tools can be used at<br />
maximum speeds and feeds. The material guarantees good polishability. <strong>Aluminium</strong> as per EN AW 7075 can be machined on any spark<br />
erosion-machine at metal removal rates and very acceptable levels. The usage of copper and graphite electrodes, as well as reduced<br />
current and spark gap will result in improved surface finishes.<br />
01/03/2012