The Single Speed/Fixie Bike in unique color combinations ... - Dom

The Single Speed/Fixie Bike in unique color combinations, super cool details, high end
components and 50mm aluminum wheel rims is here! And because of the “Flip-Flop hub” you
can ride either in the freewheeling or Fixie mode.
The perfect combination of pure design, smooth function and lifestyle!
Details:
Single Speed Bike
Frame silver, 50mm rims magenta color without CNC milling, crank set silver / black, yellow
color chain, black PVC saddle, white wheels, alu colored hubs, magenta color handlebar.
Frame: Hi-ten steel
Frame height: 54cm
Parallel saddle and seatpost (72° seat and steering angle). All TIG welded, with dropout cycling
track seat stay bridge prepared to install an additional brake (brakes in front and in back are
already in place)
Aluminum one-bolt seat clamp. Without cable routing or counterholder.
Fork: TIG welded Hi-Ten steel with oval Fork 1-1/8”
Handlebar: Aluminum 500mm medium high

Wheels: 700C, 50mm high profile (Aero) Aluminum wheel rims with high profile hubs and CNC
milling on the surface of the brakes, plus front and rear helical axes.
Tires: 700C x 23C high pressure (100psi) Nylon speed bike tires
Crank set: 165mm Aluminum crank, 44 tooth chainring with 5-arm connector
Bottom Bracket: Shimano
Pedal: Synthetic pedal including straps and reflectors
Sprocket/Freewheel: 16 teeth sprocket Flip-Flop hub (rigid and freewheel hub)
Grips: 110mm soft-grip
Brakes: Adjustable 2-finger Aluminum lever, C-Star alloy brakes, brake cables friction reduced
and brake pads with wheel control
Saddlepost: 250mm x 25.4mm Alu Micro-Adjust
Saddle: Racing saddle with PVC Soft-Feel surface, synthetic shell reinforced with steel
Total Weight: 10.9kg
Wheelbase: 978mm
The Single Speed/Fixie Bike is delivered in a seven layer bike box and is already 90%
assembled. All you have to do after unpacking is to install the front wheel and the pedals,
adjust the brake cables/brakes and make sure the handle bar is straight… and off you go!
To be on the safe side, tighten all the screws again, especially the nut of the fixed sprocket on
the back wheel. Instructions are included in the box, as well as front and back collectors.
ATTENTION:
This bike does not completely comply with the StVZO regulations, since some
of the parts (for instance the bell and the reflectors) have deliberately not been
installed.
What must a bike have to comply with the regulations of the StVZO?
- a bell with a high octave ring
- 2 independent brakes that can be used easily while the bike is in use
- a white front light and a red tail light (battery lights are ok too)
- a white front reflector and a red tail reflector (can be integrated in the lights)
- yellow pedal reflectors
- yellow reflectors on each side of the wheels in the spokes
Particularly for bike racers Paragraph 67 section 11 of the StVZO is interesting: For racing
bikes of 11 kilos or more the regulations are not very strict. Racing bikes do not have to have
lights installed, they can be battery operated and attached when necessary! However, they
must be switched on at dusk, if it’s already dark or if visibility is poor because of rain etc.