MRO - Lubker Distribution Fasteners for Industry

Manufacturing in the US since 1892 

Bostik is a worldwide company 

awith over 4,000 employees, 48 

production facilities and sales operations in 

45 countries across 5 continents. 

Bostik’s parent company is Total, a 

$180-billion multi-national 

company. Total is the 4th largest worldwide 

oil and gas company. 

Bostik. Inc, and its Construction & Distribution 

Division are proud to present you 

the best and most versatile 

product selection whether you service the 

Construction, General Industrial, MRO, or 

Marine OEM and Assembly markets. 

THEN 

& 

NOW 

Boston Blacking Co., 1892 Bostik R&D Center, 2007 

Website 

Customer serviCe 

teChniCal serviCe 

CorrespondenCe 

tds / msds requests 

authoriZed bostiK 

distributor priCing 

www.bostik-us.com 

888.603.8558 

Fax: 978.750.7306 

Mon-Fri. 8am-6pm EST 

800.523.2678 

Mon-Fri, 8am-6pm EST 

Bostik, Inc. | C&D Headquarters 

211 Boston Street | Middleton, MA 01949 

800.7.BOSTIK | contactus@bostik-us.com 

To obtain a TDS / MSDS for any Bostik product, 

please consult our website. For 24-hour 

MSDS information, call 800.227-0332. 

Please contact your sales representative or 

Customer Service for up-to-date product 

pricing.

This catalog showcases the 

broad range 

of products sold through our 

C&D Division, including the 

best brands Bostik has 

to offer. To become an 

authorized Bostik 

Distributor, please call 

888.603.8558. 

Table of Contents 

Construction 

Adhesives & Sealants 

Heavy Duty Industrial 


Marine 


Industrial and Maintenance 

Repair Operations 

engineering adhesives 

solvent-borne liquids 

Accessories 

guns & nozzles 

product displays 

literature 

Warranty & Affiliations 

2 

8 

14 

18 

18 

20 

22 

25 

26 

29 

30 

32 

35

no matter what the commercial application, 

foundation to finish, bostik has the highperformance 

adhesive and sealant to meet 

and exceed the challenges posed by weather, 

moisture, joint movement or dissimilar materials. 

our broad line of adhesives and sealants provide 

unsurpassed adhesion, durability, flexibility, 

weatherability and water resistance... and 

we’ve got the industry-recognized validations to 

prove it. available in two- and one-component, 

pourable and non-sag formulas, and a broad 

spectrum of colors, bostik has the product to 

appease even the most particular architect and 

the most demanding commercial application. 

Chem-Calk – sealing excellence since 1968. 

2 

EXTERIOR 

Pourable One-Component Pourable Two-Component 

955-SL SELF-LEVELING 

URETHANE SEALANT 

Chem-Calk 955-SL is a one-component 

pourable urethane sealant. Its 

tear and abrasion resistance characteristics, 

along with its strong bonding 

ability to concrete, delivers an ideal 

sealant. Its adhesion ability to many 

common building materials allows it 

to be specified for various horizontal 

sealing projects of dissimilar substrates. 

Chem-Calk 955-SL is an excellent 

crack repair sealant. 

VOC 

Compliant 

ASTM 

C920 

POURABLE 


Chem-Calk 550 is a two-component, pourable 

horizontal grade urethane sealant. Compliance 

to applicable performance standards makes it 

the sealant of choice for the architectural community 

when a traffic grade urethane sealant is 

required. The inherent tear and abrasion resistance 

characteristics of this 

urethane technology 

offer years of service 

as a weather sealing 

sealant. 

N-32, N-40 AND 

PRIME COAT 

Primer N-32 has been developed to provide adhesion 

on surfaces covered with fluorocarbons, silicone 

acrylics, acrylics, etc. Drying time: approximately 5 to 

10 minutes. 

Primer N-40 has been developed for use on anodized 

and mill-finish aluminum 

and most other metals. 

Prime Coat Primer is recommended 

for use on concrete, 

masonry, wood and most 

porous substrates if intermittent 

or continuous 

water immersion is anticipated. 

550 

PRIMERS 

Concrete & Masonry Window & Door Pre-Fabricated Metal Building Roofing & Flashing 

class 

ASTM 

C920 

class

EXTERIOR: Non-Sag One-Component Urethanes 

900 

Chem-Calk 900 is a premium, onecomponent, 

architectually specified 

polyurethane, non-sag sealant. Chem- 

Calk 900 meets ASTM C-920, Type S, 

Grade NS, Class 35, Use NT; US. Federal 

Specification TT-S-00230C, Type II, 

Class A. Principle applications include 

various dynamic joints, such as expansion, 

control and perimeter joints, and 

exterior sealing applications on diverse 

building materials. 

VOC 

Compliant 

916 

Chem-Calk 916 is a one-component, 

polyurethane, non-sag, textured sealant. 

It exhibits a textured appearance 

for excellent transitional sealing between 

materials of different textures. 

Chem-Calk 916 meets ASTM C-920, 

Type S, Grade NS, Class 25, Use NT; 

US. Federal Specification TT-S-00230C, 

Type II, Class A. Primary applications 

include perimeter sealing in masonry, 

perimeter sealing of windows and 

doors, construction joints, and control 

and expansion joints. 

VOC 

Compliant 

20 

ARCHITECTURAL GRADE 


ASTM 

C920 

TEXTURED 


ASTM 

C920 

class 

class 

CONSTRUCTION GRADE 


915 


polyurethane, non-sag sealant. Chem- 

Calk 915 meets ASTM C-920, Type S, 

Grade NS, Class 25, Use NT; US. Federal 

Specification TT-S-00230C, Type 

II, Class A. Key applications include 

perimeter sealing of windows and 

doors and masonry applications, such 

as expansion and control joints. 

VOC 

Compliant 

GENERAL PURPOSE 


GPS1 

Chem-Calk GPS1 is a one-component, 

polyurethane, non-sag sealant specifically 

formulated to fulfill general sealing 

installations while exhibiting excellent 

dynamic movement capability. 

Chem-Calk GPS1 meets ASTM C-920, 

Type S, Grade NS, Class 25, Use NT; 

US. Federal Specification TT-S-00230C, 

Type II, Class A. Suggested applications 

are sealing roofing components, such 

as flashing, soffit/fascia, and termination 

bar and general exterior sealing of 

dissimilar building materials. 

VOC 

Compliant 

Construction Adhesives & Sealants 

Siding HVAC Subfloor Painter & General Purpose Caulk Fiber-Reinforced Paneling 

ASTM 

C920 

ASTM 

C920 

class 

class 

Through SWRI, Chem-Calk 915 has been 

validated as meeting the following 

specifications: 

astm C719: adhesion and Cohesion of 

elastomeric Joint sealants under Cyclic 

movement [hockman Cycle] 

pass: Yes 

extension: +25% 

Compression: -25% 

substrate: glass, aluminum, Concrete 

(Concrete substrates primed with 

prime Coat l primer) 

astm C661: test method for indentation 

hardness of elastomeric - type 

sealants by means of durometer 

hardness 

rating: 30 

SWR Institute is an international 

trade association 

that represents the commercial 

sealant, waterproofing 

and restoration 

construction industry. their 

members are some of the 

most experienced and qualified 

contractors, manufacturers and design 

professionals in the industry. members promote 

industry-wide standards of application 

and products. the members of sWr institute 

are very active and are constantly striving to 

advance our industry and provide the highest 

quality products to market. 

3

Chem-Calk 2020 

NEW! 

• Next generation of waterproofing sealant 

• Silicone-free Hybrid Technology 

• Silyl-terminated sealant 

• Non-yellowing, superior UV resistance 

• Sandable and paintable 

• Very low modulus 

• Solvent- and water-free, very low VOC 

and odor 

• Doesn’t shink, crack or dry out 

• Mold and mildew resistant 

• ± 50% joint movement 

4 

Concrete & Masonry 

EXTERIOR 

Non-Sag One-Component Hybrid 

2020 


moisture curable advanced hybrid 

sealant that offers superior adhesion 

to vinyl siding, vinyl trim board and 

a variety of dissimilar surfaces. It is 

suitable for most building materials, 

including stone, masonry, wood, engineered 

wood, hardboard, aluminum 

and a variety of other metals. Chem- 

Calk 2020 has a non-sag consistency 

suitable for most vertical applications. 

Chem-Calk 2020 meets ASTM 920, 

Type S, Grade NS, Class 50. 

VOC 

Compliant 

ARCHITECTURAL GRADE 

HYBRID SEALANT 

ASTM 

C920 

class 

CONSTRUCTION GRADE 

HYBRID SEALANT 

2000 


advanced hybrid sealant. Chem-Calk 

2000 is colorfast and has long lasting 

elastomeric qualities for construction 

grade applications. Chem-Calk 2000 

meets ASTM C-920, Type S, Grade NS, 

Class 25, Use NT; US. Federal Specification 

TT-S-00230C, Type II, Class 

A. Primary applications include vinyl 

window perimeter sealing and 

engineered trim board applications. 

Chem-Calk 2000 is also available as 

textured, Chem-Calk 2000T. 

VOC 

Compliant 

ASTM 

C920 

hybrids represent state-of-the-art sealant technology, comprising properties of both 

a silicone and a polyurethane sealant. For example, the hybrids exhibit non-yellowing 

characteristics and tremendous dynamic movement capability which typifies silicones. 

moreover, these products demonstrate superb adhesion attributes, such as the polyurethanes. 

thus, hybrids embody the best of both sealant worlds. 

Window & Door Pre-Fabricated Metal Building Roofing & Flashing 

class

EXTERIOR 

Non-Sag Butyl Non-Sag Silicone 

GENERAL PURPOSE 

BUTYL SEALANT 

Chem-Calk 300 is a high performance 

butyl sealant. It is designed 

as a commercial-grade, butyl sealant 

for roofing applications. Chem-Calk 

300 meets ASTM 1311 and US. Federal 

Specification TT001657. Primary 

applications are sealing applications 

where little or no movement is expected, 

such as thresholds and sill plates 

and where water resistant properties 

are needed. 

EXTERIOR : Two-Component Polyurethane 

500 

300 

NON-SAG 


20 

Chem-Calk 500 is a two-component, non-sag, 

polyurethane sealant ideal for sealing joints in 

pre-cast concrete panels, metal curtain walls, 

perimeter sealing of door and window frames, 

plus many other uses. Chem-Calk 500 is durable, 

flexible and forms a watertight bond with most 

building materials in any combination. Tough and 

elastic, it allows for 

movement of up to 

50% of the total 

joint movement. 

Chem-Calk 500 utilizes 

the Uni-Base 

Color Pack system; 

one base is used for 

all colors! 

ASTM 

C920 

class 

1200 

RTV SILICONE 

SEALANT 

Chem-Calk 1200 is a one-component 

RTV architectural grade silicone sealant 

primarily formulated to be used 

on non-porous surfaces. Its inherent 

superior weathering properties allow 

it to be used on exterior applications 

that must withstand the harshest of 

atmospheric conditions. Chem-Calk 

1200 has particularly good adhesion 

to substrates, such as glass, metals, 

ceramics and most plastics. 

VOC 

Compliant 


UNI-BASE COLOR PACKS 

The Uni-Base System offers a vast array of colors 

to satisfy your architectural needs. A required 

component used with both Chem-Calk 500 and 

550 sealants, Color Packs include a necessary 

component for a complete cure. 


BuildingGreen is an independent company 

committed to helping building-industry professionals 

improve the environmental performance 

and reduce the adverse impacts 

of buildings. 

greenspec is buildinggreen’s premiere 

product information service. it contains 

detailed listings for more than 1,700 environmentally 

preferable building products 

with descriptions, manufacturer information, 

and links to additional resources. all 

listings are screened and written exclusively 

by our staff. the buildinggreen logo denotes 

those bostik products that are specified on 

www.buildinggreen.com. 

5

6 

Product Curing Mechanism Temperature 

Range 

Cure Time Skin Time 

Tensile 

Strength 

Elongation 

% 

Shore A 

Hardness 

Applicable Standards 

300 Solvent Release -20 to 150ºF >4 days 72 hours 80 psi 500% 25 ASTM C1311, TT-S-001657 

500 Chemical -20 to 150ºF 4-7 days 8 hours 120 psi 750% 28 ASTM C920, TT-S-227 

550 Chemical -20 to 150ºF 4-7 days 8 hours 230 psi 750% 35 ASTM C920, TT-S-227 

600 Water Evaporation 20 to 150ºF 3 days 30 mins 130 psi 250% 50 ASTM D-834, SWRI 

900 Atmospheric Moisture -40 to 150ºF 3-6 days 6 hours 180 psi 950% 38 



ASTM C920, Class 35, 

TT-S-00230C, SWRI 





955-SL Atmospheric Moisture -20 to 150ºF 3-6 days 4 hours 171 psi 500% 48 ASTM C920, TT-S-00230C 

1200 Atmospheric Moisture -85 to 450ºF 2-4 days ≥30 mins 350 psi 600% 29 

2000 Atmospheric Moisture -40 to 210ºF 

1-1 1/2 

days 

30 mins 260 psi 520% 35 

2020 Atmospheric Moisture -40 to 210ºF 1-2 days 60 mins 220 psi 700% 40 

GPS1 Atmospheric Moisture -40 to 180ºF 2-4 days 1 hour 135 psi 550% 35 

Painters’ Caulk Water Evaporation 20 to 150ºF 3 days 45 mins 130 psi 250% 50 None 

INTERIOR: Non-Sag One-Component 

Concrete & Masonry 

600 

SILICONIZED ACRYLIC 

LATEX CAULK 

Chem-Calk 600 is a gun grade siliconized 

acrylic latex caulk for interior and 

limited exterior applications. Chem- 

Calk 600 is ideal where little or no 

movement is experienced and ease 

of water cleanup is desired. Its quick 

skinning property reduces construction 

site dirt pick up, it has low odor 

and can be painted once skinned. 

Chem-Calk 600 conforms to ASTM 

C-834. 

VOC 

Com pliant 

VOC 

Compliant 

the voC Compliant 

logo designates 

bostik products that 

meet or exceed all 

Federal, state, and 

local voC standards 

for voC content, including epa, Carb, 

aqmds and otC. 


TT-S-00230C, TT-S-01543A 







PAINTERS’ CAULK 

Chem-Calk Painters’ Caulk is a painter’s 

grade interior acrylic latex caulk. 

Its ease of gunning and water cleanup 

make it the ideal caulk for the professional 

painter to seal voids between 

pipes, walls, bathroom fixtures and 

many more dissimilar materials. Chem- 

Calk Painters’ Caulk can be painted 

with a quality latex or oil-based paint 

after just 30 minutes. 

VOC 

Compliant 

ACRYLIC LATEX 

ADHESIVE 

FRP 

Chem-Calk FRP is a synthetic acrylic, latex-based 

adhesive for interior installations only. FRP is low 

odor, fast grab, and has easy-to-trowel properties 

which makes it “the contractors’ friend” when installing 

Fiber-Reinforced Panels. FRP possesses a 

solids content of 70% 

by weight, and adjustability 

time of 25-30 

minutes. 

VOC 

Compliant 

Window & Door Pre-Fabricated Metal Building Roofing & Flashing 

Note: Not intended to be used for specification preparation.

HDCA 

20 

Chem-Calk Heavy Duty Construction 

Adhesive is a one-component, 

polyurethane adhesive specially 

designed for gluing sub-floor materials 

to solid wood floor joists and 

engineered laminated joist systems. 

It offers high strength, flexibility and 

extreme durability in both interior 

and exterior installations, and bonds 

wet, frozen and treated lumber to 

most building materials. It meets 

ASTM D3498, C-557, HUD60-01 

and AFG-01 specifications. HDCA 

is CARB and OTC compliant. 



7

For more than a century, manufacturers around 

the globe have turned to bostik for innovative 

solutions to bonding and sealing applications. 

along the way, we have pioneered 

many breakthrough technologies, such as 

high performance urethane sealants and 

simson ® silyl-modified adhesives and sealants. 

as a world leader in the manufacture and supply 

of adhesives and sealants, bostik products 

are at work in the heavy-duty industrial assembly 

market sectors. 

8 

Gap & Seam Sealant 

UREThaNES & SIlICONE 

TRANSPORTATION 

LoVOC SEAL SEALANT 

Bostik LoVOC Seal is a one component, 

moisture curing, low VOC urethane 

sealant specifically designed to 

meet the demands of the transportation 

industry. Primarily targeted for 

joint/gap filling and seam/weldline 

applications where low shrinkage 

and excellent sealability is required 

at economical prices. LoVOC Seal 

possesses outstanding adhesion to 

aluminum, wood and FRP (Fiberglass 

Reinforced Polyester). It can be sanded 

and/or painted after tack free time 

has been achieved. 

VOC 

Compliant 

1152 FS 

LIQUID RIVET ADHESIVE 

Bostik Liquid Rivet 1152 FS is a one 

component, moisture curing, polyurethane 

adhesive that has extremely 

high thixotropy and cured strength. 

Significant product benefits include 

very high green strength and initial 

tack, excellent elastic high strength 

bonds. 

VOC 

Compliant 

FAST-SETTING URETHANE 

SEALANT/ADHESIVE 

1100 FS 

Bostik 1100 Fast Set is a one part urethane 

sealant that cures by reaction 

with atmospheric moisture to form a 

tough, flexible seal. It has tenacious 

adhesion to woods, metals, FRP and 

most plastics. Bostik 1100 Fast Set 

can be used in bonding, beading and 

sealing applications. 

VOC 

Compliant 

SILICONE 

SEALANT 

9732 

Bostik 9732 is a single component , 

solvent-free, acid cure, silicone industrial 

sealant that cures to a tough, 

flexible, rubbery elastomer. Its outstanding 

weatherability allows the 

sealant to retain its original adhesion, 

elongation and tensile strength properties 

after years of exposure. Not 

paintable. 

VOC 

Compliant 

Interior Sealant Exterior Sealant (UV Resistant) Sprayable Seam Sealant

advaNCEd hyBRId POlyMER TEChNOlOGIES 

2100 SPS HYBRID SEALANT FAST-SETTING 

HYBRID SEALANT 2175 FS 

2100 SPS is a 100% solids, advanced 

polymer high performance sealant 

based on Bostik Hybrid Technology. 

Its outstanding formulation exhibits 

fast curing, resulting in a superior adhesion 

to both porous and non-porous 

surfaces. Its non-yellowing characteristics 

make it an ideal product 

for aesthetically critical applications. 

Solvent-free and no isocyanates. 

70-03A 

70-03A is a versatile, high strength 

adhesive used for panel bonding in 

truck, coach and bus manufacturing. 

Its good green strength reduces the 

need for extended assembly clamping 

time. Odorless, solvent-free and isocyanate-free 

SMP technology. Moisture 

curing within 15 minutes skin time. 

Designed for making elastic construction 

joints that require high strength. 

Solvent and isocyanate-free. 

VOC 

Compliant 

70-05A 

SMP ADHESIVE 

HIGH MODULUS 

SMP ADHESIVE 

70-05A is a one-component adhesive, 

based on SMP technology, that 

has superior tensile strength after 

complete cure; suitable for bonding 

metal, wood, fiberglass-filled polyester. 

Bonds are permanently elastic 

at temperatures between -40.°F to 

212.°F. Solvent and isocyanate-free. 

VOC 

Compliant 

VOC 

Compliant 

heavy duty Industrial Adhesives & Sealants 

2175 Fast Set is a 100% solids, 

one-component, moisture curing, 

exterior industrial grade sealant 

based upon Bostik Hybrid Technology. 

Significant product benefits include 

fast skin-over time in less than 30 

minutes, paintable after skin formation 

and non-yellowing. It will not ingas 

on cure and will not shrink. Bonds 

to wood, metal, plastic, glass, FRP and 

fiberglass. Solvent-free and no isocyanates. 

VOC 

Compliant 

70-03A SK 

SLOW SKINNING 

SMP ADHESIVE 

70-03A SK is a slow skin forming (30 

minutes) version of the 70-03A (15 

minutes). Because of its slow skin 

time, 70-03A SK is the ideal product 

for the DUAL accelerated technology 

(see next page for more details). 

Solvent and isocyanate-free. 

VOC 

Compliant 

70-07A 

SMP SPRAYABLE 

SEAM SEALER 

ISR 70-07/70-07A is a one-component, 

fast curing, sprayable seam 

sealer that can be used for underbody 

coating or for overlapping seams between 

PVC, wood and metal. Paintable 

after skin formation. Sandable 

after cure. Solvent-free, does not 

shrink or bubble. Isocyanate-free. 

VOC 

Compliant 

Panel Bonding Roof Bonding Window Bonding 

NEW! 

2200 TS Advanced Hybrid Sealant 

• Next generation of waterproofing 

exterior sealant 

• Silicone-free Hybrid technology 

• Non-yellowing; superior UV resistance 

to aging and weathering 


• No HAPS, solvent-free, very low VOC 

and odor 

• Fast skinning 

• Easy to tool 

VOC 

Compliant 

9

EVOLUTION 

PRODUCT 

RANGE 

* Primerless denotes that product does not require any primer for the indicated 

application or substrate. However, considering the diversity of 

substrates, manufacturers, coatings and surface cleanliness, it is recommended 

to test Bostik SMP products for adhesion prior to using them in 

your manufacturing facility. NOTE FOR GLASS BONDING: 70-08 does not 

usually require a primer for direct glass (glazing) bonding. Fritted Glass: 

check adhesion of 70-08 to factory applied frit. Some types of frit may require 

pretreatment with PREP G. Non-fritted glass: PREP G is mandatory 

for direct UV exposure. If bond area is shielded, PREP G is not required. 

10 

Simson branded adhesives and sealants 

from Bostik combine the best of both 

worlds: the strength of polyurethanes and 

the weatherability of silicones. Bostik’s decades 

of experience and industry know-how 

have enabled it to develop a broad range of 

innovative Simson SMP products precisely 

formulated to meet demanding requirements 

for strength, durability and elasticity 

over a wide temperature range. 

Gap & Seam Sealant 

70-08A 

70-11 

SMP WINDSHIELD 

ADHESIVE 

ISR 70-08/70-08A is a one-component 

adhesive, high tensile strength; 

high green strength, which reduces 

and eliminates clamping and assembly 

times. Conforms to FMVSS 212, 

1-hour drive-away time. Contains no 

solvents and is isocyanate-free. Comes 

with conic nozzle for narrow grooves 

(KCA version) or precut V-notch nozzle 

(KC version as shown). Available 

in black only. Designed for primerless 

windshield and glass bonding. 


ADHESIVE 

ISR 70-11 is a one-component adhesive, 

high tensile strength; outstanding 

green strength, which reduces and 

eliminates clamping and assembly 

times. Contains no solvents and is 

isocyanate-free. ISR 70-11 has a longer 

skin time than 70-08 and is ideal 

when used with DUAL accelerated 

technology. 

VOC 

Compliant 

VOC 

Compliant 

SMP ADHESIVE 

ISR 70-09 is a high green strength 

version of 70-05. Used for bonding 

mirrors. Isocyanate, solvent and corrosive 

addititive-free. Slower curing 

speed versus other SMP products. 

Comes with precut V-notch nozzle. 

Available in white only. 

VOC 

Compliant 


ADHESIVE 


high tensile strength; very high 



times. ISR 70-12 is a higher green 

strength version of 70-08. Conforms 

to FMVSS 212, 1-hour drive-away 

time. Contains no solvents and is 

isocyanate-free. Comes with precut 

V-notch nozzle. 

VOC 

Compliant 

70-09 

70-12 

Interior Sealant Exterior Sealant (UV Resistant) Sprayable Seam Sealant

dUal SMP Technology: Accelerated, Elastic Bonding 

B-Component is a paste-like compound 

used as an accelerator for the curing 

process of Bostik SMP single component. 

B-Component is used primarily with 70- 

03A SK and ISR 70-11. Also available in 

sausages and pails. 

heavy duty Industrial Adhesives & Sealants 

CURE CATALYST GUN AND KIT 

B-COMPONENT DUAL SMP400P 

The handheld Dual SMP400P Gun is designed to 

deliver the adhesive and the B-Component at the 

proper ratio. It uses a unique static mixer to meter 

and mix the adhesive and B-Component together 

that is then dispensed to achieve a bead of adhesive 

that will cure “through” in hours, not days. 

Panel Bonding Roof Bonding 

Window Bonding 

The Dual SMP System brings Bostik’s SMP 

Technology to the next level by providing speed 

and security. This is done by adding a small amount 

of a water-based B-Component that catalyzes the 

moisture-curable bead to cure throughout at the 

same rate. Cure progession of the one-component 

products, by contrast, is from “outside-in”. 

For larger projects, a two-component machine 

called the SMP Precision Dose 2C Pump combines 

B-Component SMP (20 oz. sausage) with the SMPbased 

adhesive (5 gallon pail and 52 gallon drum). 

Bead Cross-section 

One-component SMP vs. Dual SMP 

One-component SMP bead is not solid after 24 hours, 

while the Dual SMP bead is solid in just 4 hours! 

11

Bostik has a complete range of high performance 

sealants formulated for ease of 

use and long lasting performance. Designed 

for a multitude of sealing applications, these 

products are engineered to provide outstanding 

adhesion to all types of materials of 

fabrication. From perimeter sealing and roof 

penetrations to sidewall, lap or butt seams, 

Bostik has the sealant for trains, buses, truck 

bodies and trailers, recreational and special 

purpose vehicles. 

Industrial Products: Typical Physical Properties 

12 

Product Basic Material Curing 

Method 

PREP G is a “black out” primer to be used on glass, 

polycarbonate (PC) and acrylic glass (PMMA) without 

ceramic coating (frit) before dispensing the 

glazing 70-08A, 70-11 and 70-12 adhesives. PREP 

G provides ultraviolet light protection to the bond 

line. Note: UV protection is required for all direct 

glazing bonding applications. Factory applied frits 

usually provide UV protection. Read and follow 

instructions in the Technical Data Sheet. 

Skin Forming 

Time (mins) 

Complete Cure 

(.125” bead) 

Tensile 

Strength (psi) 

Test Method BTM BTM ASTM D412 

DIN53504/IS037 

PREP M improves bond strength of SMP-based 

products on most non-porous substrates, such as 

metals, and especially metal with mill-oil finish. In 

cases where high thermal or physical loads, especially 

under humid conditions requiring ultimate 

adhesion, use PREP M. A clean, dry and grease 

free substrate is necessary for 

ultimate adhesion. Read and 

follow instructions in the Technical 

Data Sheet. 

Shear 

Strength (psi) 

ASTM D1002 

DIN53283 

Elongation % 

@ Break 

ASTM D412 

DIN53504/IS037 

LoVOC Urethane Moisture 45 24 hours 125 90 300 35 

1100 FS Urethane Moisture 60 1.5-3 days 150 165 870 37 

Liquid Rivet Urethane Moisture 30-45 24 hours 250 300 200 55 

2175 FS SPS Moisture 20-40 24-36 hours 145 110 100 45 

2100 SPS SPS Moisture 50 24 hours 175 75 >400 30 

2200 TS SPS Moisture 30-40 24 hours 250 230 200 55 

70-03A SMP Moisture 10-15 24 hours 400 250 270 55 

70-03A SK SMP Moisture 25 24-36 hours 400 250 270 55 

70-05A SMP Moisture 15 24 hours 500 440 200 60 

70-07A SMP Moisture 30 24-36 hours 225 150 175 45 

70-08/70-08A SMP Moisture 10-15 24 hours 425 375 225 65 

70-09 SMP Moisture 10-15 24 hours 425 310 200 65 

70-11 SMP Moisture 30-45 24-36 hours 335 365 450 60 

70-12 SMP Moisture 10-15 24 hours 580 400 380 65 

B-Component Proprietary NA NA 

Prep M Solvent-based NA NA 

Preg G Solvent-based NA

BUTYL TAPE 

Bostik’s new Butyl Tape product line provides manufacturers 

of a wide variety of products the option 

of bonding substrates with a flexible, solvent-free 

tape. Easy release from liner for user-friendly application. 

Available in various sizes. 

VOC Content 

(g/l) 

UV 

Resistance 

Colors 

(Standard) 

Packaging Comments 

ASTM D2369 ASTM G153 All listed Bostik products meet or exceed all Federal, State, and local VOC standards for VOC 

VOC 

Compliant 

content, including EPA, CARB, AQMD and OTC. 

51 Good W, G, B C, S, P, D Minimal shrink on cure; ideal for gap filling and seam sealing 

48 Fair W, G, B C, S, P, D Outstanding non-sag properties; use when large beads of sealant are needed with quick 

curing properties. Can be used as an adhesive for small loads 

36 Fair W C, S Very high green strength and initial tack; improves vibration attenuation and sound dampening 

to ensure seaworthiness of 

any vessel, bostik offers a 

variety of elastic bonding 

adhesive/sealant systems 

that provide exceptional 

weather and water-resistant 

properties. the range of 

marine products has been 

engineered for high performance elastic 

bonding and sealing of marine plywood, 

aluminum, fiberglass or other composite 

materials used in building marine vessels. 

14 

920 

Bostik Marine 920 is a one-part, gungrade 

urethane adhesive/sealant that 

moisture cures to an extremely tough, 

resilient seal, which exhibits excellent 

tear and abrasion resistance while retaining 

permanent elastomeric properties. 

It has tenacious adhesion to most 

common marine substrates, including 

virtually all woods, metal, FRP and 

most plastics. Marine 920 can be used 

as either a sealant or an adhesive. 

URETHANE 

ADHESIVE / SEALANT 

940A 

VOC 

Compliant 

SMP 


Bostik Marine 940A is a slower skin 

(30 to 45 minutes) version of 940 Fast 

Set (15 to 20 minutes). Bostik 940A is 

formulated to withstand harsh marine 

environments and has a longer opentime 

which allows for longer working 

times, especially on larger applications; 

is UV resistant (non-yellowing), 

sandable and paintable. It combines 

the adhesion/mechanical properties of 

a urethane, plus the flexibility and UV 

resistance of a silicone. 

920 FS 

FAST-SETTING 


Bostik 920 Fast Set is a one-part, gungrade 

urethane sealant/adhesive that 

moisture cures to an extremely tough, 

resilient seal, which exhibits excellent 

tear and abrasion resistance while retaining 

permanent elastomeric properties. 

It has tenacious adhesion to 

most common marine substrates including 

virtually all woods, metal, FRP 

and most plastics. Bostik 920 Fast Set 

can be used as either a sealant or an 

adhesive, and is a faster skinning formula 

of 920. 

VOC 

Compliant 

940 FS 

FAST-SETTING SMP 


Bostik Marine 940 Fast Set/940 FSA 

is a high performance, rapid moisture-curing, 

fast skinning, one-component, 

sealant/adhesive based upon 

Silyl Modified Polymer (SMP) Technology; 

specially formulated to withstand 

harsh marine environments. Possesses 

UV resistance, is sandable and paintable. 

Exhibits superior adhesion to 

porous and non-porous surfaces in 

most applications without the use of 

a primer. Maintains elasticity within 

temperature range of -40°F to 212°F 

(-40°C to 100°C). 

VOC 

Compliant 

Gap & Seam Sealant Exterior Sealant (UV Resistant)

EXTERIOR SEALANT SMP WINDSHIELD 

960 SR ADHESIVE 70-08A 

Bostik 960 SR is a fast skinning, moisture-curing 

sealant based upon Bostik 

innovative hybrid technology; specifically 

formulated to withstand harsh 

marine exposures that are encountered 

in “above deck” applications. 

Unlike conventional silicone sealants, 

960SR is not only non-yellowing, nonchalking 

and non-cracking, but also 

sandable and paintable. 


70-11 ADHESIVE 


high tensile strength; outstanding 




isocyanate-free. ISR 70-11 has a longer 

skin time than 70-08 and is ideal 

when used with DUAL accelerated 

technology. 

9732 

RTV SILICONE 

SEALANT 

Bostik 9732 is a single component , 

acid cure, silicone marine sealant that 

cures to a tough, flexible, rubbery 

elastomer. Its outstanding weatherability 

allows the sealant to retain 

its original adhesion, elongation and 

tensile strength properties after years 

of exposure. 

Interior Sealant 

VOC 

Compliant 

VOC 

Compliant 

VOC 

Compliant 

ISR 70-08/70-08A is a one-component 

adhesive, high tensile strength; 

high green strength, which reduces 

and eliminates clamping and assembly 

times. Contains no solvents and 

is isocyanate-free. Comes with conic 

nozzle for narrow grooves (KCA version) 

or precut V-notch nozzle (KC 

version as shown). Designed for primerless 

windshield and glass bonding. 

Available in black only. 

VOC 

Compliant 

70-12 


ADHESIVE 


high tensile strength; very high 




isocyanate-free. Comes with precut 

V-notch nozzle. ISR 70-12 is a higher 

green strength version of 70-08. 

VOC 

Compliant 

All Purpose Adhesive 

Marine Adhesives & Sealants 

Window Bonding 

940FS 

• Outstanding discoloration resistance 

• Excellent resistance to weathering 

• Fast-skinning, no dirt pick-up 

• Doesn’t foam or bubble when curing 

• Primerless adhesion on gelcoat or 

aluminum 

• Higher temperature resistance 


• Non-corrosive, very low odor 

15

16 

Product Basic 

Material 

Curing 

Method 

Skin Forming 

Time (mins) 

Complete Cure 

(0.125” bead) 

Tensile Strength 

(psi) 

Test Method BTM* BTM* ASTM D412 

DIN53504/ISO37 

Shear Strength 

(psi) 

ASTM D1002 

DIN53283 

Elongation % 

@ break 

ASTM D412 

DIN53504/ISO37 

920 Urethane Moisture 90 3-6 days 175 65 >500 

920 FS Urethane Moisture 70 1.5-3 days 175 65 >500 

940 SMP Moisture 35-55 1-2 days 300 250 225 

940 FS/ 

940FSA 

Charles Caudrelier, on bostik2, winner of the famous 

european race afflelou le Figaro 2004. 

SMP Moisture 15-30 24 hours 450 375 225 

960 SR SPS Moisture 25 24 hours 150 125 225 

9732 RTV Silicone Moisture 5-9 1-3 days 150 - 600 

70-08/70-08A SMP Moisture 10-15 24 hours 425 375 225 

70-11 SMP Moisture 30-45 24-36 hours 335 365 450 

70-12 SMP Moisture 10-15 24 hours 580 400 380 

Prep M Solvent-based n/a n/a n/a n/a n/a 

Prep G Solvent-based n/a n/a n/a n/a n/a 

* BTM: Bostik Test Method

All Bostik Marine sealants are easy to use, easy to sand and paint (except 9732) and stand up to the harshest marine environments. Used for 

permanent sealing or for service and repair, their applications include sealing deck hardware and hatches, around doors and portholes, 

deck to hull assembly, through-hull fittings and seams, keel joints and undermoldings, or bedding navigational equipment. 

* Primerless denotes that product does not require any primer for the indicated application or substrate. However, considering the diversity of substrates, manufacturers, coatings, 

and surface cleanliness, it is recommended to test Bostik SMP products for adhesion prior to using them in your manufacturing facility. NOTE FOR GLASS BOND- 

ING: 70-08 does not usually require a primer for direct glass (glazing) bonding. Fritted Glass: Check adhesion of 70-08 to factory applied frit. Some types of frit 

may require pretreatment with PREP G. Non-fritted glass: PREP G is mandatory for direct UV exposure. If bond area is shielded, PREP G is not required. 

Shore A 

Hardness 

VOC Content 

(g/l) 

UV Resistance Colors Packaging Comments 

D2240 ASTM D2369 ASTM G153 All listed Bostik products meet or exceed all Federal, State, and local VOC 

standards for VOC content, including EPA, CARB, AQMDs and OTC. 

37 47 fair W, B C, S Adhesive/sealant with excellent tear and abrasion resistance 

37 47 fair W, B C, S Fast curing adhesive/sealant forms tough, resilient seal 

55

supertak ® adhesives from bostik are a group 

of high performance adhesives packaged in 

easy-to-use and easy-to-store aerosol containers. 

supertak aerosol adhesives are offered in 

a range of performance properties and deliver 

consistently reliable bonds in industrial, mro, 

construction, product assembly, packaging 

and labeling applications. From fast-grabbing 

temporary bonds to bonds with the strength 

of conventional liquid contact cements, bostik 

supertak aerosols combine high performance 

with ease-of-use. 

18 

HIGH PERFORMANCE TRIM 

High Performance is the strongest 1-surface bond 

you can achieve from the Bostik SuperTak product 

line. High Performance is often used for attaching 

insulation, carpet or fabrics to wood or metal surfaces 

in vehicle or marine interior cabin construction 

or conversions; transportation 

or marine interiors; bonding 

swimming pool liners, or wherever 

strong permanent bonds between 

most porous and many non-porous 

surfaces is needed. Special 

adjustable nozzle valve allows 

for applying in a narrow-to-wide, 

low-to-high volume fan spray web 

pattern. 

FOAM & FABRIC 

SuperTak Foam & Fabric is a fast-tacking 1 or 2surface 

adhesive that forms strong, pliable, nondimpling 

bonds on a variety of fabrics; foams 

(latex, urethane, polyethylene), polyethylene films 

either being bonded to themselves, to one another 

or to wood, metals and many 

plastics. Applied with a precisioncontrolled 

lace spray pattern, it 

has “low soak” characteristics and 

its orange color allows for easy 

visual detection of proper coverage. 

Foam & Fabric is often used 

in general upholstery applications, 

transportation or marine interiors, 

construction of office partitions, 

assembly of equipment cases or 

cabinets and specialty packaging. 

SuperTak Trim is a transparent adhesive which 

offers a soft bond line, high heat resistance and 

excellent green strength for both temporary (1surface) 

or permanent (2-surface) bonding of 

lightweight materials, such as polyurethane or 

latex foams, fabrics or leather to 

a variety of porous or nonporous 

surfaces including wood, metals, 

FRP, many plastics and painted 

surfaces. 

MIST 

SuperTak Mist provides nearly the same 1-surface 

bond strength as SuperTak “High Performance”, 

but is applied as a transparent, non-staining, nonyellowing 

fine mist with low soak-in characteristics 

and longer open-time making 

it ideal for bonding to lightweight 

materials, such as foam, cloth, 

fabrics, felt, cardboard and paper. 

Applications include affixing 

labels and nameplates; attaching 

insulation, carpet or fabrics to 

wood or metal surfaces for both 

temporary or permanent installations.

GENERAL PURPOSE CONTACT TYPE 

SuperTak General Purpose is a quick-tack, specially 

formulated, versatile adhesive for both temporary 

(1-surface) or permanent (2-surface) bonding of a 

variety of lightweight materials, including paper, 

cardboard, fabric, leather, foil, foam and fiberglass 

to themselves, to each other or to 

wood, metals and some plastics. It 

can be used in a variety of graphic 

arts applications, for labeling, carton 

sealing, light assembly and 

MRO applications. 

What to Know for Best Results 

SuperTak Contact Type is used like a traditional 

contact cement: The adhesive must be applied to 

both substrate surfaces, allowed to cure for up to 

20 minutes before being joined to form a permanent, 

high-strength bond. It offers high heat and 

moisture-resistant bonding on a 

variety of similar or dissimilar materials 

used in construction, product 

assembly, laminating and MRO 

applications involving insulation, 

wood, foam, drywall, FRP, concrete, 

metals, some plastics and plastic 

laminates. Special adjustable 

nozzle valve allows for applying in 

a narrow-to-wide, low-to-high volume 

fan spray web pattern. 

Each Bostik SuperTak product has been formulated without ODC (ozone depleting 

chemical) or CFC (chlorofluorocarbon) usage. Bostik’s ongoing mission is in meeting 

or exceeding Federal, regional, state or local limits on VOC (volatile organic compound) 

emissions. 

SuperTak Aerosols are the ideal solution for: 

• Attach carpet and fabric in van 

conversions 

• Bond insulation to plywood 

• Fabric and foam bonds 

• Assemble office partitions 

• Affix labels or signage 

• Seal cartons 

• Mount photos 

• Always consult the TDS (Technical Data Sheet) and MSDS (Material Safety Data Sheet) for the 

product being used or considered. 

• The end-user must perform periodic testing of bonded production parts or assemblies to the 

conditions or exposures encountered or expected in final use in order to verify product effectiveness. 

• All SuperTak products meet Federal and local standards for VOC content. 

• Laminate edge bonding for cabinets 

or furniture 

• Jewelry display assembly 

• “1-surface” bonding means that adhesive is only applied to one substrate or surface, often done 

for temporary bonds. 

“2-surface” bonding means that the adhesive should be applied to both surfaces, substrates or 

materials being bonded, often done for more permanent bonds. 

MRO Spray Adhesives 

20 

High Performance Aerosol 

• Three-way adjustable nozzle 

• Speeds product assembly 

• Strongest 1-surface bond 

• Adheres to metals and plastics 

• High tack strength 

19

Engineering Adhesives 

bostik ® 7500 series epoxy systems are 2-part, 

room temperature curing structural adhesives 

designed to provide exceptional versatility for 

many applications. these unique formulae have 

been engineered with a range of properties to 

deliver the performance to match your unique 

and demanding requirements for construction, 

repair, mro or product assembly applications. 

bostik 7400 series Cyanoacrylate (“Ca”) adhesives 

are single-component, room temperature 

curing, rapid setting adhesives intended for 

bonding close-fitting surfaces. these products 

fall within a special category of “surface insensitive” 

cyanoacrylates which outperform conventional 

cyanoacrylates in terms of their cure 

speed, final cured strength or ability to bond 

to a wider range of substrates including many 

plastics, natural or synthetic rubbers, elastomers, 

cork, woods, veneers and leathers. 

20 

7522 

7575 

90-MINUTE POT LIFE 

48-96 HOUR CURE 

Structural epoxy having high 

peel and shear strength with 

adhesion to diverse materials, 

including rubber, plastics, woods 

and metals. An exceptional epoxy 

for bonding diverse materials 

that will tolerate adverse conditions. 

Rated: 2,800 psi shear 

strength on steel; 4.5% elongation 

at break. Temperature 

service range: -60°F to +210°F. 

Clear appearance. Meets DOD A 

82720 (1) specifications. 

7500 

EPOXY APPLICATOR GUN 

Applicator gun for two ounce, dual-barrel cartridges 

used for small maintenance or assembly 

applications. Used with a twist-on static mixer, 

the resin and hardener are mixed completely and 

dispensed accurately. Static mixers also available 

separately and are supplied 10 mixers per bag. 


12-HOUR CURE TIME 

Structural epoxy having high 

shear strength and strong adhesion 

to metals, woods, reinforced 

plastics and masonry. 

The best choice for bonding 

parts which must withstand 

weather, moisture and temperature 

fluctuations, 7538 

will adhere with minimum 

surface preparation and has a 

low coefficient of expansion. 

Rated 3,000 psi shear strength 

on steel; 2.0% elongation at 

break. Temperature service 

range: -60°F to +210°F. Green 

color. Meets MIL-A-52194-A 

requirements. 

7538 


1-3 HOUR CURE TIME 

Fast and versatile epoxy for structural bonding of metals, phenolic plastics, polyesters, glass, 

FRP, hard boards, wood, ceramics, rubber and masonry materials. Unlike conventional 

5-minute epoxies, Bostik 7575 is designed for structural bonding applications requiring 

a fast setting epoxy with low shrinkage, good shock resistance and excellent mechanical 

and electrical properties. It provides superior resistance to vapors, gases, water, galvanic 

action, petroleum fuels and salt solution. Unique formula allows for exposure to moist 

or damp surfaces while bonding. Rated: 2,800 psi shear strength on steel; 8.0% elongation 

at break. Temperature service range: -60°F to +185°F. Clear appearance.

7431 

2-5 cps VISCOSITY 

.007” GAP FILL 

Low viscosity for better surface penetration with 

wide gap filling capability. For bonding nitrile, 

neoprene and natural rubbers; 

many plastics (ABS, EPT, EVA, 

soft PVC or polyacetal; and 

metals (steel, aluminum, copper, 

brass). MIL-A-46050C 

Type II, Class 1. 

7434 

1500 cps VISCOSITY 


Higher 1500 cps viscosity allows strong bonds to 

rough, semi-porous surfaces. General purpose 

type bonds to a wide variety 

of woods, metals and plastics, 

to themselves or to each other. 

MIL-A-46050C Type II, Class 3. 

7432 


006” GAP FILL 

Used for bonding a wide and versatile range of 

materials, including woods, papers, cardboard, 

leathers, fabrics, many metals, 

plastics and elastomers. Applications 

include bonding wood 

components or trim in furniture, 

hobby and craft applications, 

product assembly and repair. 

MIL-A-46050C Type II, Class 2. 

7435 



Higher viscosity allows for strong bonds to 

rougher, more porous or acidic surfaces on 

difficult to bond substrates. General 

purpose bonds to woods, 

metals and plastics in any combination. 

MIL-A-46050C Type 

II, Class 3. 

ACCELERATOR 

Extremely fast, low viscosity 

primer/accelerator for preparing 

bond surfaces, enhancing 

bond strength or decreasing 

curing speeds. Commonly 

used when high viscosity 

adhesive is used on porous 

surfaces. Low ODC blend 

formulated to be “plastic 

friendly”. 

MRO Engineering Adhesives 

20 

Cyanoacrylates develop high tensile and 

shear strength. They’re easy to handle and dispense 

from convenient squeeze-tube packaging. 

These adhesives are well suited for bonding 

small parts or assemblies and can be adapted to 

high-speed assembly operations with automatic 

dispensing equipment. 

Advanced formulae with additional shock and 

peel resistance are available for added reliability 

in applications subject to high temperature and 

other environmental extremes. 

Bostik Engineering Adhesives are the 

permanent bonding solution for: 

• Rubber o-rings 

• Plastic to metal 

• Fiber name plates 

• Ceramic pottery 

• Soft wood and cork 

• Potting electronic circuitry 

• Golf club head-to-shaft assembly 

• Open-cell foam to rigid vinyl 

21

never-seez ® from bostik is the recognized 

brand leader in anti-seize compounds and 

lubricants. never-seez offers the broadest 

range of products formulated to protect metal 

parts from rust, corrosion, galling, excessive 

wear and seizure in high heat, extreme pressure, 

high moisture, salt water or caustic environments. 

never-seez is widely specified and 

recommended for assembly and maintenance in 

aircraft, marine, automotive, petrochemical, oil 

exploration, power generation, agriculture, logging, 

mining and food processing industries. 

22 

REGULAR GRADE NICKEL NUCLEAR GRADE 

The “original” anti-seize compound and extreme 

pressure lubricant formulated with copper, graphite, 

aluminum and other ingredients to protect 

metal parts against rust, corrosion and seizure 

up to 1800ºF. Specified by BMW, Mercedes, GE 

D6Y28A1, Garrett Engine 

Division PCS5724, 

Pratt & Whitney PWA 

36053-2 and tested to 

MIL-A-907. 

A nickel and graphite based anti-seize compound 

formulated to protect up to 2400ºF against seizure 

and galling, galvanic and severe environmental 

corrosion. Specified by GE Aircraft A5OTF198-2, GE 

D6Y28C1, Garrett Engine Division PCS5721, Pratt 

& Whitney PWA 36053 

and PWA 36053-1, Boeing 

BAC5008, and tested 

to MIL-A-907. This product 

is recommended for 

use when applications 

prohibit the presence 

of copper, especially 

when resistance to corrosive 

acidic and caustic 

solutions is required. 

The standard in the nuclear industry, Nickel Nuclear 

Grade is specially tested and certified pure for 

use in nuclear power plants. Each production of 

Nuclear Grade is tested for contaminants of sulfer, 

halogens and low-melt metals and each container 

is labeled with 

the lot number that 

certifies purity. Recommended 

for nuclear fittings, 

valves and steam 

manifolds. Provides 

maximum protection 

from high heat up to 

2400ºF and aggressive 

chemicals. Meets General 

Electric Nuclear 

D50YP12 and tested to 

MIL-A-907. 

PURE NICKEL SPECIAL HIGH TEMP STAINLESS 

A stainless steel, graphite, aluminum based antiseize 

compound formulated to protect up to 

2200ºF against seizure and galling, galvanic and 

severe environmental corrosion. It was specifically 

designed for applications that cannot use copper 

or nickel based products. 

Tested to MIL-A-907.

HT STAINLESS NUCLEAR HEAVY METAL FREE 

This premium grade anti-seize protects nuclear 

components from seizure and galling at temperatures 

up to 2200ºF. Each production lot of Never- 

Seez Nuclear Grade is tested for contaminants of 

sulfur, halogens and low-melt metals and each 

container is labeled 

with the lot number 

that certifies purity. 

This unique product prevents rust, galling and 

galvanic corrosion in salt water, salt air and highmoisture 

environments. It is a proven combination 

of copper flakes, graphite and aluminum paste 

suspended in grease specially formulated for 

marine applications to 

protect up to 1800ºF. 

This product was developed 

from years of experience 

working with 

marine engineers to 

provide superior parts 

protection in applications 

exposed to salt 

water. 

A high percentage of lubricious molybdenum disulfide 

in a premium grease provides ultimate 

protection for component assembly and roller 

bearings exposed to extreme pressure, high temperature 

and slow operating speeds. Withstands 

weld load up to 400kgf 

and temperatures up to 

750ºF. 

MRO Anti-Seize & Lubricating Compounds 

20 

The Heavy Metal Free formulation provides superior 

lubrication to all metals, including stainless 

steel, aluminum, alloy and other soft metals up 

to 2450˚F. Specifically developed for applications, 

such as marine, when the presence of copper, 

nickel or any heavy 

metals are prohibited. 

Heavy Metal 

Free offers the highest 

resistance to 

water washout, and 

protects metal parts 

from rust, corrosion, 

galling and seizure 

under extreme heat 

and heavy loads in 

severe industrial environments. 

MARINE GRADE BLUE MOLY 

BLACK MOLY 

Never-Seez Blue Moly lubricant is designed for 

industrial applications requiring non-destructive 

assembly and disassembly where combinations of 

high loads, high temperatures and low speeds are 

encountered to reduce friction during the assembly 

of press-fit components. 

Blue Moly 

withstands pressures 

and temperatures up 

to 1500ºF. 

NEW! 

Heavy Metal Free 

• Highest resistance to water washout 

• Low torque factor (.11) 

• Extreme heat resistance to 2450˚F 

• Excellent lubricity 

• Compatible with soft metals 

• Contains NO copper, nickel or 

heavy metals 

23

24 

RED BEARING LUBRICANT 

Superior in performance to soap thickened 

grease, Red Bearing Lubricant has 

70% longer life than commercial lubricants, 

as well as temperature resistance 

to 350ºF continuous service and 400ºF 

intermittent. It also shows excellent 

structural stability and maintains its consistency 

better than competitive greases 

under severe operating conditions, such 

as encountered in an over packed bearing. 

Regular Grade 

NS-10 Tube 1 oz. 

NSB-4 Tube 1/4 lb. 

NSBT-4 Brush Top 1/4lb. 

NSBT-8 Brush Top 8 oz. 

NSA-16 Aerosol 16 fl.oz. 

NS-160 Flat Top 1 lb. 

NSBT-16 Brush Top l lb. 

NSC-1 Cartridge 1 lb. 

NS-168 Flat Top 8 lb. 

NS-42B Pail 42 lb. 

NS-130B Drum 130 lb. 

NS-425B Drum 425 lb. 

Pure Nickel Special 

NSBT-8N Brush Top 8 oz. 

NSN-165 Flat Top 1 lb. 

NSBT-16N Brush Top 1 lb. 

NSN-8 Flat Top 8 lb. 

NSN-42B Pail 42 lb. 

NSN-130B Drum 130 lb. 

NSN-425B Drum 425 lb. 

Nickel Nuclear Grade 

NGBT-8 Brush Top 8 oz. 

NGBT-16 Brush Top 1 lb. 

NG-165 Flat Top 1 lb. 

NG-8 Flat Top 8 lb. 

High Temperature Stainless 

NSS-160 Flat Top 1 lb. 

NSSBT-8 Brush Top 8 oz. 

NSSBT-16 Brush Top 1 lb. 

NSS-42B Pail 42 lb. 

NSS-425B Drum 425 lb. 

High Temperature Stainless 

Nuclear Grade 

NGSS-160 NF Flat Top 1 lb. 

NGSS-4NF Flat Top 4 lb. 

Blue Moly 

NBBT-8 Brush Top 8 oz. 

NB-160 Flat Top 1 lb. 

NBBT-16 Brush Top 1 lb. 

NB-42B Pail 42 lb. 

NB-425B Drum 425 lb. 

HT BEARING LUBRICANT PIPE COMPOUND W/ TEFLON 

Never-Seez High Temperature Bearing 

Lubricant is an exclusive combination 

of a specially formulated 

high temperature grease and lubricating 

enhancers that provide long 

lasting lubrication at temperatures 

between 500ºF and 1000ºF. High 

Temperature Bearing Lubricant has 

no dropping point and is recommended 

for ball and roller bearings, 

bushings, open and sealed bearings. 

Lithium EP Grease is a multi-purpose 

lubricant for maximum protection 

of highly stressed mechanical 

components in a wide range of 

operating temperatures. This NLGI 2 

product offers extreme pressure performance, 

high load protection and 

corrosion resistance. Recommended 

for use on black iron, galvanized 

stainless steel, and high pressure 

steam pipes in contact with malleable 

cast iron, brass, stainless steel 

and galvanized fittings. 

Black Moly Lubricant 

NSB-150 Flat Top 1 lb. 

NSB-35B Pail 35 lb. 

NSB-425B Drum 425 lb. 

Red Bearing Lubricant 

NSR-140 Flat Top 14 oz. 

NSRC-1 Cartridge 14.1 oz. 

NSR-35B Pail 35 lb. 

NSR-400B Drum 400 lb. 

High Temperature Bearing Lubricant 

NHTC-14 Cartridge 14.1 oz. 

NHT-35B Pail 35 lb. 

NHT-120B Drum 115 lb. 

NHT-390B Drum 390 lb. 

White Food Grade with PTFE 

NSWT-14 Flat Top 14 oz. 

NSWT-1C Cartridge 14.1 oz. 

NSWT-7 Flat Top 7 lb. 

NSWT-120B Drum 120 lb. 

NSWT-400B Drum 400 lb. 

Never-Seez Pipe Compound with Teflon ® allows 

greater thread engagement and more positive 

sealing. This product prevents corrosion and galling 

of threads for easy disassembly at temperatures 

up to 525˚F. Recommended 

for use on 

black iron, galvanized 

stainless steel and 

pressure steam pipes in 

contact with maleable 

cast iron, brass, stainless 

steel and galvanized 

fittings. 

LITHIUM EP GREASE WHITE FOOD GRADE W/PTFE 

FDA authorized PTFE provides additional lubricity, 

especially where a thin film of lubricant is desirable. 

Never-Seez White Food Grade with PTFE is 

virtually odorless, colorless and tasteless. NSF-H1 

Certified. 

Pipe Compound with Teflon ® 

NPBT-8 Brush Top 8 oz. 

NPBT-16 Brush Top 1 lb. 

Marine Grade 

NMBT-8 Brush Top 8 oz. 

NM-160 Flat Top 1 lb. 

NMBT-16 Brush Top 1 lb. 

NM-42B Pail 42 lb. 

NM-425B Drum 425 lb 

Lithium EP grease 

PM-210 14.1 oz.

TOPCOTE ® 

Bostik TopCote ® is the perfect addition to the shop 

for table saw beds, drill presses, lathes, planers, 

band saws, miters, panel saws and hand tools. 

Compared to paste wax, TopCote is 30% slicker 

and is easier to apply. Since 

it does not contain silicone 

or petroleum, it will not stain 

wood or interfere with glues 

or finishes. Spray Bostik Top- 

Cote on your saw’s table and 

even heavy sheets of wood 

feel like they’re floating on 

air. TopCote’s fluoropolymer 

dramatically reduces sliding 

friction while it repels dust, 

dirt and moisture. 

DRICOTE ® 

Bostik DriCote ® bonds to the microstructure of 

metal in saw blades, drills and router bits, creating 

a clear, tough, microthin coating that greatly 

reduces friction and extends overall blade life by 

300%. It helps prevent resin and 

pitch buildup, so you can save 

both time and money on blade 

cleanings and resharpenings, 

while increasing overall yield. 

Since DriCote contains no silicone 

or petroleum oil, it won’t stain or 

interfere with glues or finishes. 

BEARING LUBRICANT 

Bostik Bearing Lubricant protects against welding 

and seizing like no petroleum-based lubricant 

can even under heavy operating loads and high 

temperatures - up to 550ºF. Regular maintenance 

with Bearing Lubricant can extend 

bearing life up to three times, 

far better than oil or other treatments. 

What’s more, it frees up 

frozen bearing and seals bearings 

from moisture. It dries quickly and 

won’t gum up, even after several 

applications. 


20 

Use Bostik Woodworking Products to: 

• Reduce friction on saw tables 

• Extend saw blade life up to 300% 

• Obtain faster, straighter rip cuts 

• Prevent resin buildup on blades 

and bits 

• Extend bearing life 

• Loosen frozen bearings 

• Lubricate locks, hinges, latches, 

casters and drawer slides 

25

ostik ® hot melt adhesives offer a quick, 

clean and economical way to bond a wide 

variety of materials, including wood, metal 

and glass to hard-to-bond plastics and vinyl. 

bostik offers the most complete line 

of hot melt adhesive technologies in the 

industry - polyamides, polyesters and eva 

copolymers. they’re fast, non-toxic and 

non-flammable. 

bostik thermogrip ® glue sticks are available 

in a broad selection of diameters and 

lengths for use with hand-held glue guns. 

the variety of formulations offer choices in 

open time, strength, flexibility and temperature 

resistance for bonding and assembly 

in floral, crafts, woodworking, product assembly, 

specialty packaging and more. 

26 

Bostik Hot Melts offer convenient 

solutions for: 

• Product assembly 

• Specialty packaging 

• Woodworking 

• Carton closing 

• Foam bonding 

• Cabinet and drawer assembly 

• Craft and floral displays 

• Display board assembly 

A properly formed hot melt adhesive bond will acheive 

50% of its strength after 1 minute; 75% of its strength 

after 1 hour; and 100% after 24 hours. 

23G 

Model 23G (Switchable Dual Temperature Gun) is 

best suited for craft and hobby use. Switch to a 

“low-temperature” setting for use with speciallyformulated 

glue sticks to bond styrene, ribbon, 

balloons or other thermal-sensitive substrates. 

Tried and true mainstay of the Bostik line, model 

TG-4 provides 3 to 5 lbs./hr. output for heavy-duty 

industrial applications. Powered by three solidstate 

PTC heating elements for 100 watts of melting 

power, TG-4 offers the best performance value 

for product assembly and packaging applications. 

Accessory nozzles available. 

81G 

Model 81G, a 100-watt resistance-heated gun 

with 2-3 times faster warm up and recovery than 

ordinary PTC-heated guns. A medium-duty gun 

with thermal overprotection control and precise 

dispensing features, 81G is designed 

for demanding temperature-specific 

product assembly where 2 to 4 

lbs./hr. output rate is needed. 

Accessory nozzles available. 

TG-4 TG-760 

Model TG-760 is our best hand-powered gun for 

.45” diameter sticks. At 300 watts, this gun sets 

a new standard for heavy-duty, high (5-8 lbs./hr.) 

melt output required for production, assembly or 

packaging. The TG-760 offers rapid heat-up and 

recovery times; a highly accurate 240°-420°F 

user-adjustable thermostat; and the ergonomic 

4-finger trigger and cushioned hand-grip provides 

maximum output with minimal effort 

and less hand fatigue during use. 

The TG-760 comes in a heavyduty 

plastic carrying case.

Product Product Description, Features, and Applications (3) FDA (1) Typical Viscosity 

@ 350°F 

0110 

0120 

0130 

0140 

0720 

1525 

2102 

2103 

2105 

2107 

2109 

2124 

2239 

2385 

6239 

6305 

6327 

6328 

6330 

6333 

6363 

6368 

6370 

6384 

6390 

EVA-based. Clear product for porous substrates where an invisible or “hidden” bond line is important. 

Used widely in craft, floral and fabric bonding applications. 

EVA. Medium viscosity, open-time and good hot-tack formulated for premium wood bonding. Strong 

bonds to other porous substrates, like paper, fabrics and some leathers. Tan color. 

EVA. Best Bond ® . Medium open-time; bonds to many difficult substrates, including ABS. Better resistance 

to yellowing and UV exposure than standard semi-clear sticks. 

EVA. Medium viscosity, general purpose hot melt for bonding porous substrates in light-duty, hobby, 

craft or floral applications. Economical. Semi-translucent appearance. 

EVA. Highly versatile. Bonds to most porous and many non-porous substrates, open or closed-cell 

foams; styrene and EPS for specialty packaging. Applied at 280°F to 400°F. Semi-clear. 

Polyamide performance and flexible bonds in woodworking assembly applications. Clear amber color. 

Oil resistant, wide-temperature resistance. Also good for fabric and other porous substrates. 

EVA. Faster setting than 2109, slower than 6305. Hard stick offers maximum gun “idling” time with 

minimal feeding problems. Used in “standby” assembly or packaging applications. Straw/tan color. 

EVA-PE. Low viscosity, high performance bonding of many plastics and other non-porous substrates 

or dissimilar materials. Medium open-time range. Colorless. 

EVA. Low viscosity, short open-time for woodworking and packaging applications. Runs well in low 

performance guns. Applied at 280°F to 400°F. Straw or light yellow color. 

EVA. Medium performance and features, viscosity, open-time and “hot tack”. Good general purpose 

product for porous substrates, product assembly, packaging. Straw color. 

EVA. Low viscosity, medium-setting, good hot tack for corrugated and packaging applications. 

Applied at 280°F to 400°F to many other porous substrates, including wood and some foams. Tan/ 

EVA-PE. High performance, all-purpose bonding for many difficult substrates or combinations. Longer 

open-time product provides strong, flexible bonds. Translucent appearance. 

Polyamide. Low application viscosity, high temperature resistance and long open time. Amber color. 1” 

diameter x 3”L. Plastisizer resistant for vinyl bonding. Available in .45” diameter as product “6239”. 

EVA. High performance with long open-time for bonding most porous and some non-porous substrates. 

Used for carpet bonding, cabinet and wood product assembly. Amber color. 1” diameter x 3”L only. 

Polyamide. Low application viscosity, high temperature resistance and long open time. Plastisizer 

resistant for vinyl bonding. Used for difficult product assembly applications. Amber color. 

EVA. Fast setting, low viscosity with excellent quick-tack and good heat resistance for packaging. 

Adheres to a variety of coated and uncoated board stocks. Pale yellow color. 

EVA. Low viscosity, medium open-time, flexible bonding to porous substrates, wood, fabrics, carpeting 

and some plastics. Economical, good for craft-floral markets. Translucent. 

EVA. Similar to 6327, except having higher viscosity and longer open-time. Straw color. For bonding 

wood, fabrics, carpeting and some plastics. Good for craft/floral markets. 

EVA. All purpose, high performance bonding to many difficult substrates, including metals, plastics 

and polyolefins. Very flexible with long open time. Clear appearance. 

PE-based. Low viscosity, medium open-time, general-purpose bonding of porous substrates provides 

a wider temperature resistance range than similar products. Opaque, straw color. 

EVA. All-purpose, high performance, flexible bonds to a wide range of materials. Used in product assembly 

for dissimilar or difficult substrate materials bonding. Opaque, off-white color. 

PE blend. Combines high viscosity, fast-setting and wide temperature resistance for demanding packaging, 

product assembly or repair applications. Opaque, light amber color. 

EVA. Very flexible, all-purpose type used in a wide range of craft, floral, carpet and upholstery applications. 

Semi-clear appearance. 

EVA. General purpose product with medium-to-high viscosity and medium-to-long open-time. Good 

bonds to plastics, including polyethylene, polystyrene and polyurethane foams. 

EVA. Medium open-time, versatile product for bonding many plastics, including ABS, Lexan, polyethylene 

and phenolics. Good wood bonding. Wide temperature resistance range. Light straw. 


20 

Approx. Temp. 

Service Range (4) 

Open 

Time A (2) 

Y 11,000 cps. -20°F to 154°F Medium 

Y 8,600 cps. -20°F to 149°F Short-Med 

Y 11,200 cps. 0°F to 152°F Med-Long 

11,000 cps. -10°F to 155°F Medium 


11,500 cps. -20°F to 196°F Medium 

Y 5,750 cps. 0°F to 156°F Short 

Y 5,500 cps. 0°F to 156°F Short-Med 

Y 2,025 cps. -20°F to 150°F Short 



Y 15,000 cps. -20°F to 154°F Long 

3,900 cps. 0°F to 239°F Long 

Y 4,625 cps. -20°F to 150°F Long 

Y 3,900 cps. 0°F to 239°F Long 



Y 10,500 cps. -22°F to 151°F Med-Long 

Y 25,000 cps. -40°F to 140°F Long 


Y 19,000 cps. -22°F to 125°F Med-Long 





Notes: (1) Compositional compliance with FDA regulation 21 CFR 175.105 regarding indirect food contact. Contact Bostik, Inc. for technical assistance. 

(2) “Open-time” varies depending on application (gun) temperature, amount of adhesive applied, type of substrate, substrate and ambient temperature(s). 

(3) References to “color” or “clarity” are for general descriptive purposes only. 

(4) “Temperature Service Range” values are approximate and must be determined or verified by users for their specific applications. 

27

Bulk Hot Melt Adhesives 

28 

Product Features* and Applications 

APAO Hot Melt Adhesives 

H9431 

HM4379 

H3199A 

H9446 

H9389 

Pressure-Sensitive 

H2790 

H5077 

H5265 

H4073A 

H2465 

Extended open time APAO-based hot melt with good green strength. Bonds well to PE, PP, ABS and polyester 

substrates. Absence of residual tack at room temperature. Available in higher tack version ( H9440). Used 

for fiberglass to foil insulation, fabric bonding and panel lamination. 

APAO with short open time and good adhesion on PE and PP. Best used on extrusion applications. White in 

color. 

General purpose APAO-based hot melt with a broad service range and a good open time for non-structural 

assembly. Applications include filter end-cap attachment, mattress assembly and fabric bonding. 

High performance APAO-based hot melt designed for adhesion to PE, PP and polyester scrim. Used for transportation 

interior trim and “shoddy” pad bonding applications. Short open time with high heat resistance 

and SAFT rated at 240° 

APAO with short open time for high temperature, high performance assembly application. Excellent cohesive 

strength with high SAFT. Good adhesion to PE and PP. Used in air filter assembly applications. 

Semi pressure-sensitive hot melt for bookbinding. Low viscosity allows for suggested 275°F to 300°F application 

temperature. Clear color. Excellent creep resistance. 

General purpose fugitive hot melt pressure-sensitive adhesive. “Water white”. Gives peelable bond between 

most polyethylene, polypropylene and paper substrates. Good for affixing credit cards or brochures to polyethylene 

substrates. 

This fugitive hot melt pressure-sensitive adhesive is “water white” in color. This is an improved version of 

#H5077 with a reduced level of staining, but higher peel values. 

General purpose hot melt PSA. Low viscosity. Good adhesion to PE, PP and nonwoven materials. Light color. 

SAFT is 135°F. 

General purpose hot melt PSA with good tack and peel. Low viscosity. Can be used for spray and extrusion 

applications. Light to water-clear color. Can be also used as side glue for soft cover, spine glue for hard cover 

books in graphic arts. 

R&B Softening 

Point (˚F) 

Viscosity 

(cps @ ˚F) 

250 7,000 @ 375 

257 2,700 @ 375 

298 3,100 @ 350 

301 10,300 @ 375 

315 25,000 @ 375 

155 750 @ 300 

172 1,100 @ 300 

172 2,235 @ 300 

172 1,500 @ 325 

182 2,050 @ 325 

H7911334B Versatile, semi pressure-sensitive hot melt offers excellent adhesion to polyethylene. 192 2,250 @ 350 

H2284-01 

H20053 

H2315-02 

H2211 

Medium viscosity PSA hot melt with high tack and peel. Can be applied by spray or extrusion. Can be used 

for general assembly and garage door insulation (EPS foam). 

PSA hot melt. Aggressive with good balance of tack, peel and shear. Medium viscosity. Improved SAFT over 

H2571B (183°F). Very light color. 

“Workhorse” product assembly hot melt pressure-sensitive adhesive with balanced peel, tack and shear 

strength. Bonds well to foam, paper, corrugated, various films for automotive, RV, appliance, office panels, 

plaques, carpet and trim attachment. SAFT is 206°F. 

Versatile, high performance hot melt pressure-sensitive adhesive used widely for bonding trim, carpet, foam 

insulation or sound deadening materials to wood, ABS, other plastics and some metals. Sprayable. Wide 

temperature service range with SAFT at +196°F. High tack, high peel. 

High Performance: Polyamide / Polyester Hot Melt Adhesives 

HM7116 

HM4229 

HM4239S 

Some pressure-senstive Thermogrip ® bulk 

hot melts are available in non-tacky, pillow 

shape form. 

High performance polyester hot melt in granulated form. Relatively low viscosity for polyester. Used for bonding 

wood, textiles and vinyl films in product assembly applications. 

Versatile, high performance polyamide hot melt features low application viscosity, medium set speed, good 

resistance to oils and temperature service range from 0°F to 257°F. Used for product, furniture or automotive 

assembly applications; some PVC or vinyl bonding. Pellet form, amber color. 

Versatile, high performance polyamide product features very low application viscosity, slow setting, good oil 

resistance and a temperature resistance of 239°F (115°C). Applications include oil filter assembly, non-wovens 

construction and wood cabinet assembly. Also available in stick sizes/shapes for use in many handheld 

hot-melt guns. 

206 5,400 @ 350 

247 9,200 @ 350 

248 8,000 @ 375 

250 7,900 @ 375 

270 34,000 @ 392 

275 3,500 @ 392 

275 3,480 @ 392 

*“Open-time” varies depending on application (gun) temperature, amount of adhesive applied, type of substrate, substrate and ambient temperature(s).

Bostik Thermogrip ® bulk hot melt adhesives offer 

optimum versatility, performance and economy for distributor driven 

production and assembly applications. Products based on APAO, 

SBR, SBS, SIS, SEBS, polyamide and polyester offer a range of properties, 

making them ideal for bonding a wide range of substrate 

materials for a wide variety of applicatons. These products are available 

in a variety of forms. 

Water-Borne Liquid Adhesives 

Thermogrip ® bulk hot melts are ideal for appliance assembly. 

Product Features and Applications Base 

Miscellaneous Water-Based Assembly Adhesives 

L5126A For carpet or shoddy lamination. Good water-resistance. Can be sprayed. 

Resin 

Emulsion 

Approx. 

Viscosity 

% 

Solids 

2,300 cPs 56 

L5178F01 Clean machining, fast bond development. Fluoresces under UV light to visually aid application. PVA 6,000 cPs 50 

L7073 For cloth or foam to plastic. Acrylic PSA 6,500 cPs 67 

M20-800-G 

MRO Bulk Hot Melts & Water-Borne Liquids 

20 

For foam rubber and miscellaneous lamination. Green tint to visually aid application. Please note both 

substrates must be sprayed for effective bonding. 

Synthetic 

Rubber PSA 

D-1500 Trowelable floor adhesive with high immediate grab. Acrylic 

1,000 cPs 59 

29

Solvent-Borne Adhesives (sbas) are 

still the preferred product of choice for many 

demanding applications. When a combination 

of flexibility, immediate bond strength, 

toughness, the capability of bonding dissimilar 

materials (like rubber to stainless steel) 

or where maintaining historically consistent 

levels of performance are mandatory, choose 

one of the following bostik solvent-borne 

adhesives to meet your requirements. 

30 

Solvent-Borne Liquid Adhesives 

Product (1) Base % Solids 

Application 

Methods 

Suggested Curing 

Agents (“B” Part) 4 

L1007M Chloroprene 27 spray, brush, roller not required 

L1095M Chloroprene 25 brush, roller Boscodur 9RX 

L1096M Chloroprene 24 brush, roller 

LADH1097A 

Neoprene-modified 

Synthetic Resin 

not required if 1-c 

Boscodur 9RX 

25 brush, roller, knife not required 

L1125M Chloroprene 21 spray, brush, roller Boscodur 25C 

L1142M Chloroprene 23 spray, brush, roller not required 

LADH1531A Chloroprene 16 spray, brush not required 

L1685M Chloroprene 29~31 brush, roller, knife not required 

L3050 

Synthetic 

Elastomer 

55 brush, roller, knife not required 

L4036 Nitrile 25 brush, knife, trowel not required 

L4045 Nitrile 26 brush, roller, knife not required 

L4145-30F Nitrile 30 brush, knife, trowel not required 

L4145-14H Nitrile 30 brush, knife, trowel not required 

L4420 Nitrile 21.7 spray, brush, roller not required 

L4490 Nitrile 21~23 spray, brush, roller not required 

L4585 Nitrile 31 brush, knife, trowel not required 

LADH7008 Synthetic resin 27 brush, knife, trowel not required 

L7040A Synthetic resin 28~30 roll coatable L7040B 

L7040B Amine-Based 3.5~4.0 roll coatable L7040A 

L7132 Polyester 25.5 spray, roll-coat Boscodur 4 

L7132K Polyester 25.5 spray, roll-coat Boscodur 24T 

L7132M Polyester 20 spray, roll-coat 

Boscodur 4 or 

Boscodur 4F 

L7132R Polyester 25.5 spray, roll-coat Boscodur 4B 

L7133 Polyurethane 13~18 brush, knife, trowel 

not required if 1-c 

As 2-part (optional), 

use Boscodur 4 

Notes: (1) The “L” or “LADH” prefix designates “Liquid”. Some product literature may not show these 

prefix letters. Contact Bostik, Inc. for assistance.

Shelf-Life 

(days) (3) 

270 

270 

270 

270 

270 

270 

270 

180 

270 

180 

270 

270 

270 

270 

270 

270 

180 

180 

Features and Applications (2) 

Primer designed to improve adhesion to many materials including iron, steel (chrome-plated and stainless), aluminum, glass, plastics, concrete and other 

difficult surfaces in aerospace, automotive and construction applications, as well as in the manufacturing of electronics, textiles or plastics. 

2-part contact adhesive provides excellent heat, water and oil resistance. Used to bond various rubbers, coated fabrics and rigid plastics to themselves 

or to each other. Not for flexible PVC. Applications include fabric seaming on inflatable or air-supported structures, industrial exposure suits and foul 

weather gear. 

1-part or 2-part fast tack, all-purpose contact adhesive used for bonding high pressure laminates to wood, particle-board or metals, as well as for rubbers 

or rubber foams to rigid plastics or metals. Not for flexible PVC. 

1-part adhesive with good heat, water and solvent resistance for high performance, all purpose bonding of fabrics, woods, laminates and plastics in 

construction or assembly applications. Not for flexible PVC. 

2-part adhesive with high immediate strength for bonding rubber-coated fabrics, SBR, neoprene or Hypalon materials to themselves or to each other. 

Provides strong flexible bonds in applications, including life vests, life raft inflatables and industrial exposure suits. 

1-part contact adhesive with good heat and water resistance. Used for high performance, all-purpose bonding (to themselves or to each other) of rubbers, 

metals, woods, rigid plastics (such as ABS or phenolics), fabrics, some leathers, high pressure laminates. Not recommended for flexible PVC. 

1-part spray-grade contact adhesive combines high immediate bond strength with long open-time for product assembly or construction applications on 

most substrate materials, except flexible PVC. Reduced HAPS content replacement for former L1531. 

1-part adhesive provides strong bonds to cured or uncured neoprene and butyl to concrete, wood or metal. Excellent resistance to cold-to-boiling water, 

detergents and aliphatic oils. (Example: Bonding cellulose sponge to metal mop assembly.) 

1-part high performance, pressure-sensitive adhesive. High initial grab, excellent shear and peel strength. For PSA bonding applications on metals (steel, 

aluminum), rigid plastics, nylons, polyesters and woods. 

1-part, hot-cured adhesive or base coat for synthetic rubber fabrics. Properly cured, bonds show good resistance to gasoline, oils, aromatic fuels, detergents, 

water and elevated temperatures up to 225°F. 

1-part fast-drying adhesive with high initial bond strength, dries to a clear, flexible film. Resistant to plasticizers; bonds PVC to a wide variety of materials 

in product assembly and upholstery applications. 

1-part adhesive dries quickly to a tough, elastic bond with good resistance to water, oils, detergents and plasticizers. Used for bonding vinyl to rigid 

plastics, foams and metals for interior trim, upholstery and cabin construction in transportation, automotive, aerospace and marine applications. 

1-part adhesive dries quickly to a tough, elastic bond with good resistance to water, oils, detergents and plasticizers. Used for bonding vinyl to rigid 

plastics, foams and metals for interior trim, upholstery and cabin construction in transportation, automotive, aerospace and marine applications. 

1-part fast-drying adhesive with high initial bond strength for high-strength bonds to rigid plastics, ABS, many unprimed TPO’s, primed polyolefins, PUR 

foams and carpeting. Bonds to itself for high green strength contact bonding applications. 

1-part. Similar to L4420, except available in large container size (totes) only. For fast-drying, high strength bonds to rigid plastics, ABS, unprimed TPO’s, 

primed polyolefins, PUR foams and carpeting. 

1-part versatile, all-purpose adhesive with excellent resistance to oils, water and elevated temperature. For bonding vinyls, synthetic rubbers, felt and wood 

to themselves or to each other. Applications include paint rollers, oil or air filters, felt pads and gasket bonding for storage, electronic or equipment cases. 

1-part special heat-cured adhesive, thermoplastic up to 250°F and thermosetting above 250°F. Used for bonding metals, rigid or thermoset plastics, 

plywood, hardwoods and ceramics bonded to themselves or each other; also as a coating for copper wire windings, electronic and audio loudspeaker 

components. 

2-part (with L7040B) fast curing adhesive used to enhance bonding of Buna-N, Thiokol or other rubber compounds to nylon, rayon or other synthetic 

fabrics. Can also be used as a primer on steel, brass or aluminum to promote stronger bonds to Buna-N butyl or neoprene rubber substrates. 

180 See L7040A (above). 

270 

180 

180 

180 

180 

MRO Solvent-Borne Liquids 

20 

2-part vinyl bonding adhesive system for vacuum-forming PVC to fibrous, porous or foam substrates used in automotive, aerospace, transportation, furniture, 

upholstery, luggage and other applications. Strong adhesion to polyester films, plastic laminating films, foils and sheet metal surfaces. 

Kit (7132R adhesive with premeasured Boscodur 24T) per BMS 5-127, Type 2, Class 2, Revision “F”. For vacuum-forming PVC to fibrous, porous or foam 

substrates in automotive, aerospace, furniture, upholstery, luggage and other applications. 

2-part vinyl bonding adhesive system for vacuum-forming PVC to fibrous, porous or foam substrates used in automotive, aerospace, transportation, 

furniture, upholstery, luggage and other applications. Strong adhesion to polyester films, plastic laminating films, foils and sheet metal surfaces. 

2-part vinyl bonding adhesive system for vacuum-forming PVC to fibrous, porous or foam substrates used in automotive, aerospace, transportation, 

furniture, upholstery, luggage and other applications. Strong adhesion to polyester films, plastic laminating films, foils and sheet metal surfaces. 

1-part adhesive specifically designed for bonding vinyl-coated fabrics with superior resistance to high humidity and prolonged stress at elevated temperatures. 

Used for vinyl lap seam construction for air inflatable shelters, tarps, or covers. Can be used as a 2-part with Boscodur 4 in most critical situations. 

(2) It is recommended to obtain and review a TDS (Technical Data Sheet) and MSDS (Material Safety Data Sheet) for each product. 

(3) Shelf-life is from date of manufacture (“DOM”). Subject to change. Contact Bostik, Inc. for more information. 

(4) Curing agents can be used to improve or modify specific properties of adhesives. Refer to the TDS and MSDS information. 

31

Anisam Nozzles Sausage Nozzles Cartridge Nozzles 

noZ007 • noZ008 • noZ001 • noZ006 noZ002 • noZ005 noZ009 • noZ004 • noZ003 

41001 

7:1 ratio ; 10.1 oz cartridge handgun for 

all low viscosity sealants 

T16X 

10.1 oz cartridge airgun with pressure regulator 

B12S20 

13.5 and 20 oz sausage handgun 

32 

accessories Guns & Nozzles 

41004-2T 

26: 1 ratio; 10.1 oz. cartridges 

handgun for all general purpose 

sealants and adhesives 

ANISAM/3SC 

10.1 oz cartridge airgun for 70-07 Sprayable 

Seam Sealer 

61006 

10 and 13.5 oz sausage airgun 

H45 

46:1 ratio ; 10.1 oz cartridge handgun 

for very high viscosity adhesives. 

51001 

12:1 ratio; handgun for 10 oz. sausage packs 

61006-20 

10, 13.5 and 20 oz. sausage airgun 

Construction Industrial Marine

never-seeZ ® Counter-top point oF purChase displaY 

designed to hold 12-1 lb. cans of never-seez anti-seize and lubricating 

compounds, its compact size makes this sturdy corrogate p.o.p. an ideal 

countertop display. mix-and-match products for an eye-catching 

display! Contact your bostik Customer service representative and 

receive your p.o.p. free of charge. 

bostiK ® sealant and adhesive displaY raCK 

this steel display rack has five substantial bins that can each hold a case of 

product, allowing you to offer quantity and variety. powder-coated white 

finish provides extra durability and appeal. (10.1 oz. cartridges shown) 

Bostik rack headers are available in a variety of styles, and 

for most product lines. Contact Bostik for your custom 

designed header! 

accessories Displays 

33

34 

accessories Literature 

industrial transportation and bostiK marine ® 

bostik sealants & elastic bonding adhesives for transporation & marine is a helpful guide with 

application-specific technical information. (Literature code: TM1) 

The dual smp brochure comes complete with a mini-cd containing a flash demonstration of the Dual 

SMP400P gun. For more information, visit www.dualsmp.com. (Literature code: B59) 

Chem-CalK ® : CommerCial ConstruCtion 

bostik ® Chem-Calk sealants is a complete guide by application and technology for all your construction 

sealant and adhesive needs. (Literature code: C15) 

Blue Bostik Division 7 Binders include current product Technical Data Sheets. (Literature code: C31) 

Chem-Calk color charts (Literature code: CC1) 

mro: never-seeZ ® 

never-seez Catalog and our q&a brochure are the key pieces of literature explaining the myriad of 

applications for Bostik Anti-Seize compounds, greases and lubricants. (Catalog Literature code: N1; 

Q&A Brochure: N30) 

Technical and Material Safety Data Sheets are comprehensive sources of information available at the 

click of a button. Find current technical data sheets or an MSDS at www.bostik-us.com. 

Industrial Product binders are also available, and include current product Technical Data Sheets and 

Technical Marketing information. (Literature Code: B108)

Notes 

35

38 

Warranty & affiliations 

Our Commitment to “Green” 

Bostik continuously proves its commitment to the environment by offering its customers “green” products that are easily recyclable, environmentally 

friendly and which anticipate regulatory improvements and responses to requirements. 

All of our production facilities rigorously and systematically monitor their emissions and wastes. 

Performance indicators allow us to regularly check on the environmental performances of our plants. Systems are established to manage our 

environmental performance, as well as safety and quality achievement. 

By aligning our business with ‘green’ 

coalitions, such as the U.S. Green Building 

Council and Green Building Initiative, 

Bostik endeavors to offer our customers 

the safest and eco-friendliest products on 

the market. 

INDUSTRY ALLIANCES 

The U.S. Green Building Council (USGBC) is the 

nation’s foremost coalition of leaders from every 

sector of the building industry working to promote 

buildings that are environmentally responsible, 

profitable and healthy places to live and work. Their 

more than 7,200 member organizations and network 

of more than 80 regional chapters are united to advance 

their mission of transforming the building industry to 

sustainability. 

The mission of the Green Building Initiative is to 

accelerate the adoption of building practices that result 

in energy-efficient, healthier and environmentally 

sustainable buildings by promoting credible and 

practical green building approaches for residential 

and commercial construction. Bostik is a Regular 

member of the Green Building Initiative. 

All statements, technical information and recommendations set forth herein are based on tests, 

which Bostik believes to be reliable. However, Bostik does not guarantee their accuracy or 

completeness. The buyer should conduct their own tests of this product before use to determine 

proper preparation technique and suitability for proposed application. Any sales of this product 

shall be on terms and conditions set forth on Bostik’s order acknowledgement. Bostik warrants 

that the product conforms with Bostik written specifications and is free from defects. BOSTIK 

DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE REMEDY FOR 

NONCOMPLIANCE WITH THIS WARRANTY SHALL BE THE REPLACEMENT OF THE PRODUCT OR 

REFUND OF THE BUYER’S PURCHASE PRICE. IN NO CASE WILL BOSTIK BE LIABLE FOR DIRECT, 

CONSEQUENTIAL, ECONOMIC OR OTHER DAMAGES. 

The technical information supplied is typical physical property data and is not intended for specification use. 

Photography used in this brochure is representative of applications suitable for Bostik products and in no way 

represents endorsement by any manufacturer.

Notes 

39

Bostik Construction & Distribution Locations 

C&D HEADqUARTERS 

211 Boston Street | Middleton, MA 01949 

P: 978.777.0100 | F: 978.750.7802 

E: info@bostik-us.com 

CORPORATE HEADqUARTERS 

11320 Watertown Plank Road | Wauwatosa, WI 53226 

P: 414.774.2250 | F: 414.479.0645 

RESEARCH & DEVELOPMENT 

1035 Louis Drive | Warminster, PA 18974 

P: 215.957.0690 | F: 215.957.0716 

MANUFACTURING 

1740 County Line Road | Huntingdon Valley, PA 19006 

P: 215.357.0756 | F: 215.357.0460 

205 W. Oliver Drive | Marshall, MI 49068 

P: 269-781-3971 | Fax: 269-781-6400 

BOSTIK HEADqUARTERS 

Immeuble Iris - La Defense 2 | 92062 Paris La Defense 

Cedex, FRANCE 

P: (33) 1 47 96 94 65 | F: (33) 1 47 96 96 90 11320 

BOSTIK CANADA 

4565 Boulevard Metropolitain East 

Montreal, Quebec | CANADA H1R 1Z4 

P: 514.593.0418 | F: 514.593.0413 

BOSTIK BRASIL 

São Paulo, Brasil 

P: 011 55 11 3622-1999 | F: 011 55 11 3621-4455 

Contato: Aguinaldo dal Pogeto 

BOSTIK NETHERLANDS B.V. 

Roosendaal 

P: (31) 165 590 590 | F: (31) 165 556 662 

E: infol@bostik.com | www.bostik.nl 

B2 - 2007; rev 1. © 2007 by Bostik, Inc. All rights reserved. This catalog, including all graphic designs, is the sole property 

of Bostik, Inc. Nothing may be altered or reproduced in any form without the permission of Bostik, Inc. 

BOSTIK AUSTRALIA PTY. LTD. 

51-71 High Street | Thomastown, Victoria 3074 Australia 

P: 61(3)9279.9207 | F: 61(3)9279.9240 

E: frank.lord@bostikfindley.com.au 

BOSTIK ARGENTINA 

Buenos Aires, Argentina 

P: 011 54 11 4662 2374 | F: 011 54 11 4662 2378 

E: ovidio.biafore@bostikfindley-us.com 

BOSTIK MEXICO 

Esfuerzo Nacional 2 | Fracc Alce Blanco 

Naucalpan de Juarez | Edo de Mexico CP 53370 

P: 011 (52) (55) 53 58 20 09 | F: 011 (52) (55) 53 58 22 69

MRO - Lubker Distribution Fasteners for Industry

Create successful ePaper yourself

Delete template?

Save as template?