eco-track - Camox

More documents

Recommendations

Info

4 www.eco-tracks.com 5
BASICS Manufacturing The tracks are made from carbon manganese steel, alloyed with boron by a special metallurgical treatment. After hardening with water, the steel has a 500 HB degree of hardness. The steel has good welding properties and wear characteristics. Important order information to get the right track: 1. Tire dimension 2. Tire brand and model 3. Machine type and model 4. Ground conditions 5. Type of use (No 1 and 2 is very important) Recommended ECO-Tracks linkage system Machines/Maximum load Tire size Track model Link Ø Link hook Harvesters 26,5 09X- 22 mm 15 x 45 mm Forwarder 10-15 ton load 26,5 09X- 22 mm 15 x 45 mm Harvesters 26,5 09X- 22 mm 15 x 45 mm Forwarder 14-18 ton load 26,5 - 30,5 29X-, 39X 26 mm 18 x 45 mm Forwarder 18 ton load > 26,5 - 30,5 49X- 30 mm 30 x 50 mm 5
Page 1 and 2: WELCOME TO OUR TERRITORY 1 English
Page 3: For those who go where no one else
Page 7 and 8: ECO-TRACK 26 mm link system Part no
Page 9 and 10: EVO 26 mm link system Part no. Desc
Page 11 and 12: OF 22 mm link system OF The track
Page 13 and 14: MAX 26 mm link system Notice! Narro
Page 15 and 16: BALTIC 22 mm link system 26 mm link
Page 17 and 18: MAGNUM 26 mm link system Part no. D
Page 19 and 20: EXW 26 mm link system 30 mm link sy
Page 21 and 22: CONVENTIONAL TRACKS Standard Track.
Page 23 and 24: WHEEL TRACK 22 mm link system Part
Page 25 and 26: SPECIAL PROdUCTS BILd KOMMER SPECIA
Page 29: QUALITY AND KNOWLEDGE Olofsfors was

eco-track - Camox

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?