CAMLOG® Implant System Product Catalog 2011

Valid from January 2011

The CAMLOG ® Implant System 

System Information 4 

Surgery 

Planning 14 

X-Ray Planning Foils 14 

X-Ray Transfer Pictures 14 

CT-Planning 15 

Implant Overview 16 

SCREW-LINE 18 

SCREW-LINE Implants 18 

SCREW-LINE Surgery Set 20 

SCREW-LINE Instruments 21 

Osteotomy Sets SCREW-LINE, straight/angled 24 

CAMLOG ® Guide System 26 

Healing Caps 30 

Surgery Sets 33 

Sinus Set 33 

Instruments 34 

Surgical Instruments 34 

Surgical-Prosthetic Instruments 36 

Prosthetic Instruments 37 

Content 

Prosthetics 

Prosthetic Overview 40 

Torque Wrench Setting 44 

Impression taking, Bite registration, 

Fabrication of the Plaster Model 48 

Impression taking, closed/open tray 48 

Bite Registration 50 


Crown and Bridge Restorations 51 

Temporary Abutments 51 

Esthomic ® Abutments 52 

Universal Abutments 55 

Gold-plastic Abutments 56 

Titanium Bases CAD/CAM 56 

Ceramic Abutments 57 

Logfit ® Prosthetic System 58 

Accessories for CAMLOG ® Abutments 59 

Hybrid Restorations 60 

Bar Restorations 60 

Ball Abutment Anchoring System 64 

Locator ® System 66 

Double Crown Restorations with Universal and 

Telescope Abutments 69 


Instruments for Dental Technicians 71 

Esthomic ® Selection Abutments 74 

Auxiliary Products 78 

Information 82 

Index 86 

Alphabetical 86 

Article numbers 93 

3

4 


System Information 


The CAMLOG ® Implant System is based on years of clinical 

and laboratory experience and is a user-friendly, reliable 

prosthetically oriented implant system. 

The CAMLOG ® Implant System is being continuously 

deve loped and adapted to the state of technology by the 

internal research and development team in collaboration with 

clinics, universities, and dental technicians. 

The CAMLOG ® Implant System is well documented 

scien tifically. Numerous studies based on various parameters, 

e. g. implant surface, time of implantation and/or implant 

loading, primary stability, connection design, or type of 

suprastructure, supporting long-term success. 

SCREW-LINE implants (K-Series) 

SCREW-LINE implants are conical self-tapping screw implants 

and are available in Promote ® (1.4 mm machined implant 

neck part) and Promote ® plus (0.4 mm machined implant 

neck part) versions. 

Both implant versions include the Tube-in-Tube inner 

configuration with square grooves allowing the user the 

Platform Switching option. 

The healing caps PS, impression posts PS and abutments PS 

can only be used with SCREW-LINE implants (K-Series). Only 

these components make the Platform Switching option with 

the CAMLOG ® Implant System possible. 

SCREW-LINE implants are mounted in the sterile packaging 

with an insertion post color coded based on the diameter. 

Implant diameters: 3.3/3.8/4.3/5.0/6.0 mm. Implant lengths: 

9/11/13/16 mm. 

0.4 mm 1.4 mm 

Promote ® plus Promote ® 

Note: The Platform Switching option is only possible 

with SCREW-LINE implants with K article numbers 

(K-Series)! 

Important note: 

Implants with 3.3 mm diameter 

These implants are an alternative in cases where the 

alveolar ridge width is only 5–6 mm. Because of their lower 

mechanical strength compared to larger diameter implants, 

they should only be used under the following conditions: 

• As single implants, they should be used only to replace 

mandibular incisors and/or maxillary lateral incisors. 

• An edentulous arch can be restored with a multi-unit 

prosthesis only if a bar is splinted with at least four 

implants of 3.3 mm diameter without distal extensions. 

• Implants of Ø 3.3 mm are suitable for a partially edentulous 

arch when combined with implants of larger diameter for 

splinted superstructures. However, the limited strength of 

the implants with Ø 3.3 mm must be taken into account. 

• Avoid excessive mechanical stressing of the implants 

when using ball abutments in combination with 

Ø 3.3 mm implants. 

The healing time for Ø 3.3 mm implants is at least 12 

weeks. Double crown constructions are not permissible on 

Ø 3.3 mm implants. 

Implants with 3.8 mm diameter 

These implants may not be used in the molar area with 

angled abutments.

CAMLOG Surface Structures 

Promote ® surface 

SCREW-LINE implants are available with the Promote ® surface 

(micro-macro surface). On SCREW-LINE implants, the abrasiveblasted, 

acid-etched Promote ® surface extends up to 1.4 mm 

under the implant shoulder and the Promote ® plus surface 

up to 0.4 mm under the implant shoulder. The Promote ® 

surface is a tried and tested surface for anchoring dental 

implants in the bone and has shown good scientific results 

in osteohistology and in pull-out trials. These results suggest 

that the Promote ® surface leads to rapid osseointegration of 

the CAMLOG ® implants. 

Promote ® surface 

CAMLOG ® Tube-in-Tube Implant-Abutment 

Connection 

All CAMLOG ® implants are equipped with the proven Tubein-Tube 

implant abutment connection and feature three 

symmetrically arranged grooves (width 0.5 or 0.7 mm, depth 

1.2 mm). 

SCREW-LINE implants have square grooves (inner 

configuration of the K-Series) in the cylindrical implant neck 

area. 



Implant inner thread and outer geometry 

The implant has two sets of internal threads. The upper 

internal thread of the 3.8, 4.3 5.0 and 6.0 mm implants 

is intended for the fixation of the healing caps, ball, bar 

and locator abtuments. The lower internal thread is for the 

fixation of the abutment screw. The 3.3 mm implant only has 

the lower internal thread for all healing caps and abutments 

(see diagram below). 

For optimal positioning of the abutments in the implant, 

they should be aligned in the bone so that one of the three 

grooves points vestibularly. With the SCREW-LINE implants, 

the drivers have marks that correspond to the three grooves 

of the implant inner configuration. 

Abutment guidance 

in the implant 

Implant 

Abutment 

Abutment screw 

Groove/ 

cam design 

Upper inner thread 

Lower inner thread 

The inner and outer geometry of the implants and abutments 

are for the most part rotary machined. The tolerances can 

therefore be kept very low. The result is excellent precision 

without impacting the material structure. The patented Tubein-Tube 

design of the implant abutment connection (Patent 

EP 851 744 and corresponding property rights) ensures a 

highly precise, stable and anti-rotation connection to the 

prosthetic components. 

5

6 



Abutment compatibility 

SCREW-LINE implants with the J article number can be 

combined with abutments with the K article number (K-Series) 

without limitation except with the PS abutments for Platform 

Switching. 

Implant with 

J article number 

What does not work... 

Due to the shortened square grooves, SCREW-LINE implants 

with the K article number (K-Series) cannot be combined with 

abutments with the J article number (long cams). 

SCREW-LINE implant 

with K article number 

Abutment with 

K article number 

Abutment with 


The PS abutments for Platform Switching cannot be combined 

with SCREW-LINE implants with the J article number. In this 

case, the grooves of the implant would not be fully covered. 

SCREW-LINE 

Implant with 


Abutment PS for 

Platform Switching

Platform Switching (PS) Option SCREW-LINE implants 

(K-Series) for Platform Switching 

To give CAMLOG users the option of Platform Switching, the 

implants of the SCREW-LINE (Promote ® and Promote ® plus 

surfaces) have been optimized geometrically and given the K 

article numbers. The three grooves of the Tube-in-Tube inner 

configuration have been changed from round to square and 

shortened (K-Series). The healing caps PS, impression posts 

PS and abutments PS of the K-Series can only be used with 

the SCREW-LINE implants (K-Series). These components make 

the Platform Switching method with the CAMLOG ® implant 

system possible. SCREW-LINE implants can be provided with 

standard abutments and abutments PS of the K-Series. 

SCREW-LINE 

Implant 

Promote ® plus Promote ® 

Abutment of 

K-Series 

Tube-in-Tube implant abutment connection with square implant grooves 

and abutment cams 

Healing Caps PS for Platform Switching 

The diameter of the healing caps PS (cylindrical, wide body, 

bottleneck) of the K-Series is reduced in the area of the 

shoulder support making it possible to adapt soft tissue over 

the implant shoulder. 



Impression posts PS, open and closed tray for 

Platform Switching 

Use of the healing caps PS (K-Series) requires application of 

the geometrically modified impression posts PS (K-Series) 

for Platform Switching due to soft-tissue adaptation over 

the implant shoulder. The cams of the impression posts have 

been adapted to the grooves of the SCREW-LINE implants 

and shortened. 

Temporary abutments PS, Esthomic ® abutments PS 

and Universal abutments PS for Platform Switching 

The abutments PS of the K-Series are also reduced in the area 

of the shoulder support making it possible to adapt soft tissue 

over the implant shoulder for the prosthetic restoration. The 

cams of the abutments have been shortened and adapted to 

the grooves of the SCREW-LINE implants. 

The Platform Switching option is used to support the hard and 

soft tissue in esthetic regions. Due to the horizontally reduced 

diameter of the abutment PS in relationship to the implant 

diameter, the implant-abutment interface on the implant 

shoulder is shifted towards the middle of the implant. 

The abutments PS are only compatible with the SCREW- 

LINE implants with K article numbers (K-Series). 

PS: Platform Switching 

7

8 



CAMLOG ® Abutments with K Article Number 

(K-Series) 

The abutments are tubular and extended toward the apex 

(5.4 mm) and have three cams in the upper area that match 

to the three grooves in the implant. 

All abutments of the K-Series have shortened cams that fit 

into the shortened grooves of the SCREW-LINE implants and 

are also compatible with previously sold implants. 

Short cam geometry (K-Series) 

When inserting the abutments, their tubular extension toward 

the apex allows for the simple, easy, and safe orientation in the 

longitudinal axis before the three cams rest on the shoulder 

of the implant. The abutment is rotated until perceptible 

engagement of the cams into the grooves of the implant has 

occurred. The abutment is then in the final position. 

The implant-abutment connection of the CAMLOG ® Implant 

System is predominantly a form-fitting connection. The 

connection with the short cam geometry has been optimized 

biomechanically by means of extensive finite element 

analyses. The figure below shows the distribution of the von 

Mises tension in the implant-abutment connection at a load 

in accordance to ISO 14801 with 200 N. 

Healing caps 

The various healing caps are used for single-stage or twostage 

procedures based on the indication. The healing caps 

are available in three designs (cylindrical, wide body, and 

bottleneck). 

Healing caps PS (cylindrical, wide body, and bottleneck) for 

Platform Switching are also available. 

The healing caps PS are only compatible with the SCREW- 

LINE implants with K article numbers (K-Series). 

CAMLOG ® bar and ball abutments, Locator ® 

abutments 

These abtuments differ in their apical thread which engages 

into the upper implant thread for the 3.8, 4.3, 5.0 and 6.0 

mm and the lower implant thread for the 3.3 mm implants. 

These abutments do not have cams due to their function. 

Bar, ball and Locator ® abutment

Prosthetic Restorations 

CAMLOG ® implants can be provided with a wide range of 

anatomically appropriate prosthetic components. Esthetic 

results are easily achievable. Nearly all abutments are color 

coded corresponding to the implant diameters. 

Abutments for crown and bridge restorations 

● Temporary abutment 

● Temporary abutment PS for Platform Switching 

● Esthomic ® abutments 

● Esthomic ® abutments PS for Platform Switching 

● Universal abutment 

● Universal abutment PS for Platform Switching 

● Gold-plastic abutment 

● Titanium base CAD/CAM 

● Ceramic abutment 

● Logfit ® abutment 

Abutments for hybrid restorations 

● Bar abutment 

● Ball abutment 

● Locator ® abutment 

● Universal and telescope abutment 

Temporary abutment 

The temporary abutments (PEEK material) can be used after 

immediate placement or for a traditional temporary restoration. 

Both temporary abutments and temporary abutments PS for 

Platform Switching are available for SCREW-LINE implants. 

Esthomic ® abutments 

The abutments of the Esthomic ® line have an anatomically shaped 

shoulder and are available in various gingival heights. 

● Esthomic ® abutment, straight 

● Esthomic ® abutment, 15° angled, in type A and B 

● Esthomic ® abutment, 20° angled, in type A and B 

● Esthomic ® abutment, inset 

After fabricating the master model, the suitable Esthomic ® 

abutments can be quickly and easily selected using the colorcoded 

Esthomic ® selection abutments in the dental laboratory. 

There is no longer any need for expensive and complicated 

storage of abutments. 

Angled Esthomic ® abutments, types A and B 

Angled abutments types A and B are available in the Esthomic ® 

line of abutments. Type A has a cam opposing the direction of 

the angle. In contrast to type A, type B has a 60° offset cam. 

Both types make six different rotation positions possible to 

achieve an optimal prosthetic axis alignment. 



Type A 

Cam alignment 

against the angle 

Type B 

Cam alignment in 

direction to the angle 

Type A Type B 

Cam with 60° offset 

Surgical instruments 

The surgical instruments are color coded to match the 

diameter of the implant. 

For simple overview and handling, an autoclavable surgery 

set is available for the SCREW-LINE implants and includes 

all required instruments. The instruments are sorted and 

marked in the set based on the sequence during implant bed 

preparation. 

The implant types can be inserted transgingivally (singlestage) 

or subgingivally (two-stage) based on the indication. 

See also indication description in the instruction manual. 

60° 

9

10 



General Safety and Precautionary Information 

The descriptions in this product catalog are not adequate to allow 

immediate use of the CAMLOG ® Implant System. Orientation in the 

handling of the CAMLOG ® Implant System by an experienced surgeon is 

recommended. 

An improper procedure during use of the CAMLOG ® products can lead to 

failures, implant damage, bone loss or unsatisfactory esthetic results. The 

products may be used only by dentists, physicians, and surgeons trained in 

the implant system. Use of these products requires specialized knowledge 

and experience in implant dentistry. CAMLOG regularly offers courses or 

technical consultations on the use of its products. Your CAMLOG local 

representative is glad to advise you. 

Our products are sold only to physicians/dentists and dental laboratories 

or on their prescription. Not all products are available in all countries. 

Technical consultation regarding our products can be obtained orally, in 

writing, by electronic media, and/or through demonstrations. It reflects 

the current state of knowledge and technology as known at the time 

of market introduction of the product. It does not absolve the user from 

the obligation to personally check the product and its suitability for the 

proposed purposes, indications, and procedures. Product processing and 

use occur outside our control and therefore are the responsibility of the 

user. Any liability for damages caused in this way is excluded. 

Use the product only in combination with CAMLOG ® implants and 

instruments. We accept no warranty or replacement responsibilities in the 

event third-party components are used. The CAMLOG ® Implant System 

is part of a comprehensive treatment concept and must be used only 

with the pertinent original parts and tools according to the suggestions 

and instructions for use provided by the manufacturer. All components 

of the CAMLOG ® Implant System are carefully matched to one another. 

The use of third-party components can affect system function and results 

in the exclusion of any warranty or replacement services offered through 

ALTATEC GmbH/CAMLOG. 

Tools and system components are designed for specific implant and 

prosthetic product lines and implant diameters. Use with a different 

implant or prosthetic product line or a different diameter can lead to 

mechanical failure of system components, tissue injury, or unsatisfactory 

esthetic results. Because of this, some implant and prosthetic product lines 

have some dedicated components and tools. The temporary abutment 

PS, universal abutment PS and Esthomic ® abutments PS are suitable for 

so-called Platform Switching and should be used exclusively with the 

SCREW-LINE implants (K-Series). Pay attention to the color markings when 

choosing abutments and instruments for the required implant diameter. 

If not otherwise specified in the instruction manual, reusable CAMLOG ® 

products may be reprocessed as long as they successfully pass the 

prescribed inspection according to the instruction manuals or preparation 

instructions. CAMLOG ® products intended for single use must not be reused 

because safe preparation and/or functional safety cannot be ensured. 

We guarantee the flawless quality of our products as part of our sales and 

delivery conditions. Specifications on existing patents, trademarks, or other 

intellectual rights are not legally binding. During intraoral 

use, products must be secured in general against aspiration 

and swallowing. 

Packaging units 

If not otherwise specified, the packaging unit is 1 each. 

Explanation of symbols/characters on labels/product 

labels and package inserts 

NON 

STERILE 

Rx only 

Sterilization using irradiation 

Non-sterile 

Caution, consult accompanying documents 

Use by 

Do not reuse 

Article number 

Lot number 

Manufacturer 

Temperature limitation 

Caution: Federal law (USA) restricts this 

product to sale by or on the order of a 

dentist or physician. 

Color coding of the surgical and prosthetic 

CAMLOG ® products 

Color Diameter 

grey 3.3 mm 

yellow 3.8 mm 

red 4.3 mm 

blue 5.0 mm 

green 6.0 mm

Exterior packaging: 

Sealed, color-coded, folding carton with product label 

Secondary packaging: 

Sealed 

Implant internal packaging (primary packaging): 

Sealed, color coded 

Example of product label 

of the implant internal packaging 

Implant type: 

SL: SCREW-LINE 

Implant/surface 

Symbol for sterilization with 

gamma-radiation 

HIBC – Barcode 

Caution: Federal law (USA) restricts 

this product to sale by or on the 

order of a dentist or physician. 

Manufacturer 

Sterile until 



Article number with diameter and length in mm (e. g. K-Series) 

Product family 

Ø 

Lot 

number 

Length Do not reuse 

The 

green dot 

Identification of registry in 

accordance with guideline 93/42 

EWG: DEKRA Certification, 

Stuttgart, Germany 

US Pat. No. 5,823,776 

Patent number 

Caution, 

consult accompanying 

documents 

Stickers 

for patient 

data file 

Color coding 

according to 

implant diameter 

11

Surgery 

Contents 

Planning 14 

X-ray Planning Foils 14 

X-ray Transfer pictures 14 

CT-Planning 15 

Implant Overview 16 

SCREW-LINE 18 

SCREW-LINE Implants 18 

SCREW-LINE Surgery Set 20 

SCREW-LINE Instruments 21 

Osteotomy Sets SCREW-LINE, straight/angled 24 

CAMLOG ® Guide System 26 

Healing Caps 30 

Surgery Sets 33 

Sinus Set 33 

Instruments 34 

Surgical Instruments 34 

Surgical-Prosthetic Instruments 36 

Prosthetic Instruments 37 

13

14 

Surgery – Planning 

Planning Foils / X-ray Transfer Pictures 

Art. No. Article 

K5300.9010 

(840-6870) 

K5300.9011 

(840-6871) 

K5300.9080 

(840-6872) 

K5300.9081 

(840-6873) 

K5300.9082 

(840-6875) 

K5300.9083 

(840-6877) 

K5300.9084 

(840-6878) 

X-ray Transfer pictures 1:1.25 

SCREW-LINE implants 

Planning slide, self-adhesive, 

Magnification 25% 

X-ray Planning Foil 1:1.25 



X-ray Planning Foil 1:1.4 



Ø 

in mm 

3.3 

3.8 

4.3 

5.0 

6.0 

kostenlos 

kostenlos 

kostenlos 

kost

Art. No. Article Material 

A2002.2000 

(840-0003) 

A2222.2200 

(840-0005) 

A2050.2600 

(840-9719) 

A2050.2800 

(840-7034) 

CT-tube 

for drill Ø 2.0 mm, corrugated tubing, 

Length 4.0/10.0 mm, 

internal diameter 2.1 mm, 

external diameter 2.5 mm, 

pack of 10 

CT-tube 

for drill Ø 2.2 mm, corrugated tubing, 

Length 4.0/10.0 mm, 

internal diameter 2.3 mm, 

external diameter 2.7 mm, 

pack of 10 

Drill for CT-tube 

(for A2002.2000), Ø 2.6 mm 


(for A2222.2200), Ø 2.8 mm 

Surgery – Planning 

CT-Planning 

Titanium alloy 


Stainless steel 


15

16 

Surgery 

Implant Overview 

SCREW-LINE Implant 

Promote ® 

K-Series 

SCREW-LINE Implant 

Promote ® plus 

K-Series 

L: 9 mm 

L: 11 mm 

L: 13 mm 

L: 16 mm 

K1042.3311 

Ø 

3.3 mm 

K1042.3809 

K1042.3811 

K1042.3813 

K1042.3816 

Ø 

3.8 mm 

Ø 

4.3 mm 

Ø 

5.0 mm 

Ø 

6.0 mm 

Ø apical 2.4 mm 3.3 mm 3.6 mm 4.3 mm 5.2 mm 

L: 9 mm 

L: 11 mm 

L: 13 mm 

L: 16 mm 

K1042.3313 

K1042.3316 

K1052.3311 

Ø 

3.3 mm 

K1052.3809 

K1052.3811 

K1052.3813 

K1052.3816 

Ø 

3.8 mm 

K1042.4309 

K1042.4311 

K1042.4313 

K1042.4316 

Ø 

4.3 mm 

K1042.5009 

K1042.5011 

K1042.5013 

K1042.5016 

Ø 

5.0 mm 

K1042.6009 

K1042.6011 

K1042.6013 

K1042.6016 

Ø 

6.0 mm 

Ø apical 2.4 mm 3.3 mm 3.6 mm 4.3 mm 5.2 mm 

All SCREW-LINE implants with K article number (K-Series) are equipped with square grooves in the inner 

configuration. 

K1052.3313 

K1052.3316 

K1052.4309 

K1052.4311 

K1052.4313 

K1052.4316 

K1052.5009 

K1052.5011 

K1052.5013 

K1052.5016 

K1052.6009 

K1052.6011 

K1052.6013 

K1052.6016

18 

Surgery SCREW-LINE 

SCREW-LINE Implants Promote ® 

Art. No. Article Ø 

in mm 

K1042.3311 

(840-6698) 

K1042.3313 

(840-6699) 

K1042.3316 

(840-6700) 

K1042.3809 

(840-6701) 

K1042.3811 

(840-6702) 

K1042.3813 

(840-6703) 

K1042.3816 

(840-6704) 

K1042.4309 

(840-6706) 

K1042.4311 

(840-6707) 

K1042.4313 

(840-6708) 

K1042.4316 

(840-6709) 

K1042.5009 

(840-6710) 

K1042.5011 

(840-6711) 

K1042.5013 

(840-6712) 

K1042.5016 

(840-6713) 

K1042.6009 

(840-6715) 

K1042.6011 

(840-6716) 

K1042.6013 

(840-6718) 

K1042.6016 

(840-6719) 

All CAMLOG ® implants are packed sterile. 

SCREW-LINE 

Implant, Promote ® 

includes insertion post 

and cover screw 

K-Series 

3.3 

3.8 

4.3 

5.0 

6.0 

Length 

in mm 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

Material 

Titanium Grade 4 



















Surface: Promote ® Micro-macro surface


in mm 

K1052.3311 

(840-6722) 

K1052.3313 

(840-6723) 

K1052.3316 

(840-6724) 

K1052.3809 

(840-6725) 

K1052.3811 

(840-6727) 

K1052.3813 

(840-6728) 

K1052.3816 

(840-6729) 

K1052.4309 

(840-6730) 

K1052.4311 

(840-6731) 

K1052.4313 

(840-6732) 

K1052.4316 

(840-6733) 

K1052.5009 

(840-6735) 

K1052.5011 

(840-6737) 

K1052.5013 

(840-6738) 

K1052.5016 

(840-6739) 

K1052.6009 

(840-6740) 

K1052.6011 

(840-6741) 

K1052.6013 

(840-6742) 

K1052.6016 

(840-6743) 


SCREW-LINE 

Implant, Promote ® plus 

includes insertion post 

and cover screw 

K-Series 


SCREW-LINE Implants Promote ® plus 

3.3 

3.8 

4.3 

5.0 

6.0 

Length 

in mm 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

Material 




















Surface: Promote ® Micro-macro surface 

The Promote ® micro-macro surface has proven its worth as a reliable dental implant surface. Numerous scientific studies demonstrate this. To provide the 

bone with a larger rough surface, the Promote ® plus implants have an additional Promote ® portion of 1.0 mm, right up to the bone-soft tissue margin 

compared to the Promote ® implants. This extends the bone-implant contact surface of Promote ® plus upward to the esthetically relevant coronal zone. 

Since they have the same insertion protocol, Promote ® and Promote ® plus implants can be used in combination in the same patient. 

Note: With SCREW-LINE implants with diameter 3.8/4.3/5.0/6.0 mm the option of Platform Switching is possible. 

See additional information on page 8. 

19

20 


Surgery Set SCREW-LINE 


J5300.0055 

(840-7340) 

Surgery set 

SCREW-LINE 

Contains all necessary color-coded surgical 

instruments, including torque wrench and 

holding key for insertion post


in mm 

J5005.2303* 

(840-6111) 

J5005.3500 

(840-0342) 

J5005.2003 

(840-6420) 

J5033.2003* 

(840-6147) 

J5033.2803* 

(840-6148) 

J5015.0009* 

(840-9697) 

J5015.0011* 

(840-9910) 

J5015.0013* 

(840-8903) 

* These instruments are also included in the SCREW-LINE surgery set. 

Round bur 

internal irrigation, resterilizable 

Round bur 


Pilot drill 

without coil, internal irrigation, 

resterilizable 

Pilot drill SCREW-LINE 

reduced coil, 


Pre-drill SCREW-LINE 


Depth stop SCREW-LINE 

for pilot drill (J5033.2003) and 

pre-drill (J5033.2803) 

with reduced coil, 



Surgical Instruments SCREW-LINE 

Length 

in mm 

Material 

2.3 – Stainless steel 




1.7-2.8 – Stainless steel 

– 9 Stainless steel 



21

22 




in mm 

J5025.3311 

(840-6112) 

J5025.3313 

(840-6113) 

J5025.3316 

(840-6114) 

J5025.3809 

(840-6117) 

J5025.3811 

(840-6119) 

J5025.3813 

(840-6120) 

J5025.3816 

(840-6121) 

J5025.4309 

(840-6123) 

J5025.4311 

(840-6125) 

J5025.4313 

(840-6126) 

J5025.4316 

(840-6130) 

J5025.5009 

(840-6138) 

J5025.5011 

(840-6139) 

J5025.5013 

(840-6140) 

J5025.5016 

(840-6141) 

J5025.6009 

(840-6142) 

J5025.6011 

(840-6143) 

J5025.6013 

(840-6145 

J5025.6016 

(840-6146) 

Form drill SCREW-LINE, 


internal irrigation, 


The instruments listed above are also included in the SCREW-LINE surgery set. 

3.3 

3.8 

4.3 

5.0 

6.0 

Length 

in mm 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

9 

11 

13 

16 

Material 





Stainless steel

Art. No. 

J5015.3300 

(840-6487) 

J5015.3800 

(840-4982) 

J5015.4300 

(840-4984) 

J5015.5000 

(840-4985) 

J5015.6000 

(840-4986) 

J5038.3316 

(840-6149) 

J5038.3816 

(840-6150) 

J5038.4316 

(840-6151) 

J5038.5016 

(840-6152) 

J5038.6016 

(840-6161) 

J5039.3309 

(840-6162) 

J5039.3809 

(840-6164) 

J5039.4309 

(840-6165) 

J5039.5009 

(840-6182) 

J5039.6009 

(840-6183) 

Article Ø 

in mm 

Depth stop 

for SCREW-LINE form drills, 




Cortical bone, 



Tap SCREW-LINE, 

with hexagon, 



The instruments listed above are also included in the SCREW-LINE surgery set. 



Length 

in mm 

3.3 – Titanium alloy 















23

24 


Osteotomy Set SCREW-LINE 


in mm 

J5418.0020 

(840-5443) 

Osteotomy set SCREW-LINE, straight convex 

Content: 

J5417.2800 Pre-Osteotome SCREW-LINE, 

straight convex 

J5418.3300 Osteotome SCREW-LINE, straight convex 




1.7-2.8 

3.3 

3.8 

4.3 

5.0 

6.0 

Material


in mm 

J5418.0030 

(840-8929) 

Osteotomy set SCREW-LINE, angled convex 

Contents: 

J5417.2800 Pre-Osteotome SCREW-LINE, straight convex 

J5418.3310 Osteotome SCREW-LINE, angled convex 






Osteotomy Set SCREW-LINE 

1.7-2.8 

3.3 

3.8 

4.3 

5.0 

6.0 

Material 

25

26 


CAMLOG ® Guide System 

Template-guided preparation of the implant bed and implantation of SCREW-LINE implants 


in mm 

SCREW-LINE implants CAMLOG ® Guide, Promote ® plus 

K1053.3809 

(114-8019) 

K1053.3811 

(114-8020) 

K1053.3813 

(114-8021) 

K1053.4309 

(114-8022) 

K1053.4311 

(114-8023) 

K1053.4313 

(114-8024) 


Surgery Sets CAMLOG ® Guide System 

J5041.0001 

(114-4964) 

J5041.0002 

(114-4965) 

J5041.0003 

(114-4966) 


CAMLOG ® Guide, Promote ® plus, 

includes insertion post and 

cover screw 


CAMLOG ® Guide, Promote ® plus, 


cover screw 

Surgery Set CAMLOG ® Guide, 

SCREW-LINE, 

internal irrigation, sterile, 

Content: Pre-drill CAMLOG ® Guide 

Ø 3.8 mm, length 6 mm 

and form drill CAMLOG ® Guide 



SCREW-LINE, 





Ø 3.8 mm, length 9 und 11 mm 


SCREW-LINE, 





Ø 3.8 mm, length 9, 11 und 13 mm 

Note: The surgery sets CAMLOG ® Guide SCREW-LINE, the gingiva punches CAMLOG ® Guide, and the form drills 

CAMLOG ® Guide SCREW-LINE cortical bone are intended for single use only! 

3.8 

3.8 

3.8 

4.3 

4.3 

4.3 

Length 

in mm 

9.0 

11.0 

13.0 

9.0 

11.0 

13.0 

Material 







Surface: Promote ® Micro-macro surface 

3.8 9.0 Stainless steel 


3.8 13.0 Stainless steel



Template guided preparation of the implant bed and implantation of SCREW-LINE implants 


in mm 

Surgery sets CAMLOG ® Guide System 

J5041.0004 

(114-4967) 

J5041.0005 

(114-4968) 

J5041.0006 

(114-4969) 

Gingiva Punch CAMLOG ® Guide 

J5041.3800 

(114-4970) 

J5041.4300 

(114-4971) 

Surgery set CAMLOG ® Guide, 

SCREW-LINE, 







SCREW-LINE, 





Ø 4.3 mm, length 9 und 11 mm 


SCREW-LINE, 





Ø 4.3 mm, length 9, 11 und 13 mm 

Gingiva Punch CAMLOG ® Guide, 

sterile, Ø 3.8 mm 

Gingiva Punch CAMLOG ® Guide, 

sterile, Ø 4.3 mm 

Length 

in mm 

Material 




3.8 Stainless steel 


Note: The surgery sets CAMLOG ® Guide SCREW-LINE, the gingiva punches CAMLOG ® Guide and the form drills 


Guiding Sleeve CAMLOG ® Guide 

J3714.5500 

(114-4961) 

J3714.5501 

(114-4962) 

Guiding Sleeve CAMLOG ® 

Guide, Ø 3.8 mm, 2 units 

Guiding Sleeve CAMLOG ® 

Guide, Ø 4.3 mm, 2 units 

3.8 Titanium alloy 


27

28 





in mm 

Insertion post CAMLOG ® Guide for lab analogs 

K2026.3800 

(114-5009) 

K2026.4300 

(114-5010) 

Insertion post CAMLOG ® Guide 

for lab analogs, 

includes fixing screw, Ø 3.8 mm, 

2 units 


for lab analogs, 

includes fixing screw, Ø 4.3 mm, 

2 units 

Note: The surgery sets CAMLOG ® Guide SCREW-LINE, the gingiva punches CAMLOG ® Guide, and the form drills 


Length 

in mm 

Material 



Form drills CAMLOG ® Guide SCREW-LINE Cortical bone, for bone quality 1 and 2 (Lekholm & Zarb 1985) 

J5048.3809 

(114-4972) 

J5048.3811 

(114-4973) 

J5048.3813 

(114-4974) 

J5048.4309 

(114-4975) 

J5048.4311 

(114-4976) 

J5048.4313 

(114-4977) 

Form drill CAMLOG ® Guide, 

SCREW-LINE, 

Cortical Bone, internal irrigation, 

sterile, Ø 3.8 mm, length 9 mm 


SCREW-LINE, 




SCREW-LINE, 




SCREW-LINE, 




SCREW-LINE, 




SCREW-LINE, 



3.8 

3.8 

3.8 

4.3 

4.3 

4.3 

9.0 

11.0 

13.0 

9.0 

11.0 

13.0 






Stainless steel





in mm 

CAMLOG ® Guide instruments for implant diameter 3.8 mm and 4.3 mm 

Length 

in mm 

Material 

J5301.0448 Check-up pin CAMLOG ® (114-4979) 

Guide 3.8 Stainless steel 

J3715.5500 Setting tool CAMLOG ® (114-4963) 


J3713.5555 Template drill CAMLOG ® (114-4960) 


J5300.0012 Driver for CAMLOG ® Guide 

(114-4978) 

implants, 

short, manual/wrench 

4.3 

4.3 

4.3 


4.3 

29

30 

Surgery 

Healing Caps 

Art. No. Article Ø GH 

in mm 

J2015.3320 

(840-0099) 

J2015.3340 

(840-0100) 

J2015.3820 

(840-0102) 

J2015.3840 

(840-0103) 

J2015.3860 

(840-0104) 

J2015.4320 

(840-0105) 

J2015.4340 

(840-0106) 

J2015.4360 

(840-0107) 

J2015.5020 

(840-0108) 

J2015.5040 

(840-0109) 

J2015.5060 

(840-0110) 

J2015.6020 

(840-0111) 

J2015.6040 

(840-0112) 

J2015.6060 

(840-0113) 

Healing cap, 

cylindrical 

* Suitable for bite registration. 

All healing caps are packed sterile. 

3.3 

3.8 

4.3 

5.0 

6.0 

2.0 

4.0 

2.0 

4.0 

6.0* 

2.0 

4.0 

6.0* 

2.0 

4.0 

6.0* 

2.0 

4.0 

6.0* 

GH: gingiva height 

Material 






Healing Caps PS, cylindrical, for Platform Switching with SCREW-LINE implants with K article number 

K2005.3820 

(114-4996) 

K2005.3840 

(114-4997) 

K2005.3860 

(114-4998) 

K2005.4320 

(114-4999) 

K2005.4340 

(114-5000) 

K2005.4360 

(114-5001) 

K2005.5020 

(114-5003) 

K2005.5040 

(114-5004) 

K2005.5060 

(114-5005) 

K2005.6020 

(114-5006) 

K2005.6040 

(114-5007) 

K2005.6060 

(114-5008) 

Healing cap PS, 

cylindrical 

PS 

3.8 

4.3 

5.0 

6.0 

2.0 

4.0 

6.0* 

2.0 

4.0 

6.0* 

2.0 

4.0 

6.0* 

2.0 

4.0 

6.0* 




Titanium alloy


in mm 

J2014.3320 

(840-6056) 

J2014.3340 

(840-6057) 

J2014.3820 

(840-6058) 

J2014.3840 

(840-6059) 

J2014.3860 

(840-6060) 

J2014.4320 

(840-6062) 

J2014.4340 

(840-6067) 

J2014.4360 

(840-6068) 

J2014.5020 

(840-6069) 

J2014.5040 

(840-6071) 

J2014.5060 

(840-6072) 

J2014.6020 

(840-6073) 

J2014.6040 

(840-6074) 

J2014.6060 

(840-6075) 

Healing Cap, 

wide body 

All healing caps are packed sterile. 

3.3 

3.8 

4.3 

5.0 

6.0 

GH 

in mm 

2.0 

4.0 

2.0 

4.0 

6.0 

2.0 

4.0 

6.0 

2.0 

4.0 

6.0 

2.0 

4.0 

6.0 


Material 






Healing Caps PS, wide body, for Platform Switching with SCREW-LINE implants with K article number 

K2004.3840 

(114-4988) 

K2004.3860 

(114-4989) 

K2004.4340 

(114-4990) 

K2004.4360 

(114-4991) 

K2004.5040 

(114-4992) 

K2004.5060 

(114-4993) 

K2004.6040 

(114-4994) 

K2004.6060 

(114-4995) 

Healing Cap PS, 

wide body 

PS 

3.8 

4.3 

5.0 

6.0 

4.0 

6.0 

4.0 

6.0 

4.0 

6.0 

4.0 

6.0 





Surgery 

Healing Caps 

31

32 

Surgery 

Healing Caps 


in mm 

J2011.3340 

(840-6046) 


(840-6048) 


(840-6049) 


(840-6050) 


(840-6051) 


(840-6052) 


(840-6053) 


(840-6054) 


(840-6055) 

Healing Cap, 

bottleneck 

GH 

in mm 

All healing caps are packed sterile. GH: gingiva height 

Material 

3.3 4.0 Titanium alloy 

3.8 

4.3 

5.0 

6.0 

4.0 

6.0 

4.0 

6.0 

4.0 

6.0 

4.0 

6.0 





Healing Caps PS, bottleneck, for Platform Switching with SCREW-LINE implants with K article number 

K2001.3840 

(114-4980) 

K2001.3860 

(114-4981) 

K2001.4340 

(114-4982) 

K2001.4360 

(114-4983) 

K2001.5040 

(114-4984) 

K2001.5060 

(114-4985) 

K2001.6040 

(114-4986) 

K2001.6060 

(114-4987) 

Healing Cap PS, 

bottleneck 

PS 

3.8 

4.3 

5.0 

6.0 

4.0 

6.0 

4.0 

6.0 

4.0 

6.0 

4.0 

6.0 




Titanium alloy

Art. No. Article Material 

T2010.0010 

(840-0449) 

Sinus set 

by Drs. Kirsch/Ackermann 

Contents: 

Surgery Sets 

Sinus Set 

Universal rasp Stainless steel 

Elevator 25°/25° Stainless steel 




Elevator 90°/90°/60° Stainless steel 


Plugging/packing instrument 

Ø 4.7 mm; spoon Ø 7.5 mm 

Plugging/packing instrument 

Ø 2.6 mm; pear Ø 4.5 mm 



Medical beaker Stainless steel 

33

34 

Instruments 

Surgical Instruments 

Art. No. Article Length 

in mm 

J5300.2028 

(840-0420) 

Paralleling pin 

SCREW-LINE, with depth marks 

J5002.0005 

(840-0337) Drill extension 

ISO shaft 

J5322.0010 

(840-6219) 

J5322.0011 

(840-6220) 

J5300.0007 

(840-0409) 

J5300.0008 

(840-0410) 

J5300.0009 

(840-0411) 

Tap adapter, short 

for tap SCREW-LINE 

Tap adapter, long 

for tap SCREW-LINE 

Driver 

for screw implants, with ISO shaft 

for angled handpiece 

Driver, short 

for screw implants, manual/wrench, 

with borehole for screwdriver, 

hex, long 

Driver, long 

for screw implants, 

manual/wrench 

Ø 1.7-2.8/ 

2.0 

Material 







27.0 Stainless steel

Art. No. Article Dimension 

in mm 

J5300.0010 

(840-0412) 

J5300.0030 

(840-0417) 

J5002.0010 

(840-0338) 

J5302.0010 

(840-0429) 

K5302.3310 

(114-8025) 

K5302.3810 

(114-8026) 

J5302.3300 

(840-0430) 

J5302.3800 

(840-0431) 

J5002.0012 

(840-0339) 

J5002.0020 

(840-0340) 

Cardanic driver (30°) 

for screw implants, 

adjustable length 

CAMLOG ® Pick-up instrument 

holder for carrying implants 

Adapter 

ISO shaft for angled handpiece 

Material 

– Stainless steel 



Holding key for insertion post – Stainless steel 

Adapter for screw implants, long 

for SCREW-LINE and ROOT-LINE 

implants 

Holding sleeve for screw implants 

color coded 

Cleaning needle 

for drills with internal irrigation 

Cleaning cannula 

for drills with internal irrigation 

Instruments 

Surgical Instruments 







35

36 

Instruments 

Surgical-Prosthetic Instruments 


in mm 

J5330.8600 

(840-5492) 

J5330.8500 

(840-5491) 

J5316.0510 

(114-8016) 

J5316.0501 

(114-8011) 

J5316.0502 

(114-8012) 

J5316.0504 

(114-8015) 

J5316.0503 

(114-8014) 

J5320.1030 

(840-0444) 

Prosthetic set 

Content: 

J5320.1030 Torque wrench 

Screwdriver: 

J5315.0501 hex, short, manual/wrench 

J5315.0502 hex, long, manual/wrench 

J5315.0503 hex, long, ISO shaft 

J5315.0504 hex, short, ISO shaft 

Prosthetic tray 

(without content) 

Screwdriver 

hex, extra short, 

manual/wrench 

Screwdriver 

hex, short, 

manual/wrench 

Screwdriver 

hex, long, 

manual/wrench 

Screwdriver 

hex, short, 

ISO shaft 

Screwdriver 

hex, long, 

ISO shaft 

Torque wrench 

with continuous torque adjustment 

until maximal 30 Ncm 

Material 

Plastic/ 


Plastic 






– Stainless steel


in mm 

J5300.0011 

(840-0413) 

J5315.0005 

(840-0408) 

J5300.0020 

(840-0415) 

J5300.0025 

(840-0416) 

J5300.0027 

(840-0794) 

J5300.0028 

(840-6186) 

08929-CB 

(840-8461) 

08393-CB 

(840-5258) 

09530-CB 

(840-5271) 

08517-CB 

(840-8117) 

Driver 

for ball abutment, 

manual/wrench 

Screwdriver 

Activator for ball abutment matrix 

CM Dalbo ® –Plus 

Driver 

for bar abutment 

Ø 3.3/3.8/4.3 mm 

Driver 


Ø 5.0/6.0 mm 

Driver 

for impression post and healing cap for 

bar abutment Ø 3.3/3.8/4.3 mm 

Driver 

for impression post and healing cap for 

bar abutment Ø 5.0/6.0 mm 

Driver 

for Locator ® , 

manual/wrench 

Locator ® instrument 

three part 

Instruments 

Prosthetic Instruments 

Material 









Locator ® angle measurement guide – Stainless steel 

Locator ® parallel post 

(4 units) 

– Nylon 

37

Prosthetics 

Contents 

Prosthetic Overview 40 

Torque Wrench Setting 44 

Impression Taking, Bite Registration, 


Impression taking, closed/open tray 48 

Bite Registration 50 


Crown and Bridge Restorations 51 

Temporary Abutments 51 

Esthomic ® Abutments 52 

Universal Abutments 55 

Gold-plastic Abutments 56 

Titanium Bases CAD/CAM 56 

Ceramic Abutments 57 

Logfit ® Prosthetic System 58 


Hybrid Restorations 60 

Bar Restorations 60 

Ball Abutment Anchoring System 64 

Locator ® Anchoring System 66 

Double Crown Restorations with Universal and 

Telescope Abutments 69 


Instruments for Dental Technicians 71 

Esthomic ® Selection Abutments 74 

39

40 

Prosthetics Overview 

Article GH 

in mm 

Impression 

taking 

PS 

PS 

Bite 

registration 

Fabrication 

of the 

plaster 

model 

Abutments 

for crown 

and bridge 

restorations 

PS 

PS 

Impression post, 

open tray 

Impression post PS, 

open tray, for 

Platform Switching with 


Article No. K 

Ø 

3.3 mm 

Ø 

3.8 mm 

Ø 

4.3 mm 

Ø 

5.0 mm 

Ø 

6.0 mm 

K2121.3300 K2121.3800 K2121.4300 K2121.5000 K2121.6000 

– K2119.3800 K2119.4300 K2119.5000 K2119.6000 


closed tray K2110.3300 K2110.3800 K2110.4300 K2110.5000 K2110.6000 


closed tray, for 



Article No. K 

Impression cap for 

impression post, 

closed tray 

Bite registration post, 

incl. bite registration 

cap 

– K2109.3800 K2109.4300 K2109.5000 K2109.6000 

J2111.3300 J2111.3800 J2111.4300 J2111.5000 J2111.6000 

J2140.3300 J2140.3800 J2140.4300 J2140.5000 J2140.6000 

Lab analog for 

CAMLOG ® abutments J3010.3300 J3010.3800 J3010.4300 J3010.5000 J3010.6000 


Temporary abutment PS, 

for Platform Switching 

with SCREW-LINE 

implants 

Article No. K 

Esthomic ® abutments, 

straight 

Esthomic ® abutment PS, 

straight, for Platform 

Switching with SCREW- 

LINE implants Article No. K 

1.0-1.8 

3.0-4.5 

– K2241.3800 K2241.4300 K2241.5000 K2241.6000 

– K2208.3800 K2208.4300 K2208.5000 K2208.6000 

– K2226.3810 

K2226.3830 

K2226.4310 

K2226.4330 

K2226.5010 

K2226.5030 

K2226.6010 

K2226.6030 

1.5-2.5 – K2202.3815 K2202.4315 K2202.5015 K2202.6015 

GH: gingiva height

Article GH 

in mm 

Abutments 

for crown 

and bridge 

restorations 

PS 

PS 

PS 


15° angled, 

type A 


15° angled, type A, for 



Article No. K 


15° angled, 

type B 


15° angled, type B, for 


SCREW-LINE Implants 

Article No. K 


20° angled, 

type A 


20° angled, 

type B 

Esthomic ® abutment 

Inset 

Universal abutment 

Universal abutment PS, 



Implants Article No. K 

Gold-plastic abutment 

Titanium base CAD/CAM 

1.0-1.8 

3.0-4.5 


Ø 

3.3 mm 

Ø 

3.8 mm 

– K2227.3810 

K2227.3830 

Ø 

4.3 mm 

K2227.4310 

K2227.4330 

Ø 

5.0 mm 

K2227.5010 

K2227.5030 

Ø 

6.0 mm 

K2227.6010 

K2227.6030 

1.5-2.5 – K2203.3815 K2203.4315 K2203.5015 K2203.6015 

1.0-1.8 

3.0-4.5 

– K2228.3810 

K2228.3830 

K2228.4310 

K2228.4330 

K2228.5010 

K2228.5030 

K2228.6010 

K2228.6030 

1.5-2.5 – K2204.3815 K2204.4315 K2204.5015 K2204.6015 

1.0-1.8 

3.0-4.5 

1.0-1.8 

3.0-4.5 

1.5-2.8 

– K2231.3810 

K2231.3830 

– K2232.3810 

K2232.3830 

K2231.4310 

K2231.4330 

K2232.4310 

K2232.4330 


K2231.5010 

K2231.5030 

K2232.5010 

K2232.5030 

K2231.6010 

K2231.6030 

K2232.6010 

K2232.6030 

K2235.3315 K2235.3815 K2235.4315 K2235.5015 K2235.6015 

K2211.3300 K2211.3800 K2211.4300 K2211.5000 K2211.6000 

– K2201.3800 K2201.4300 K2201.5000 K2201.6000 

K2246.3300 K2246.3800 K2246.4300 K2246.5000 K2246.6000 

K2244.3348 K2244.3848 K2244.4348 K2244.5048 K2244.6048 

41

42 


Article GH 

in mm 

Abutments 

for crown 

and bridge 

restorations 

Abutments 

for hybrid 

restorations 

Ceramic abutment 


Ø 

3.3 mm 

Ø 

3.8 mm 

Logfit ® abutments 0.8 

1.5 – K2550.3808 

K2550.3815 

Logfit ® impression cap 

Logfit ® analog 

Ø 

4.3 mm 

Ø 

5.0 mm 

Ø 

6.0 mm 

K2242.3340 K2242.3840 K2242.4340 K2242.5040 K2242.6040 

K2550.4308 

K2550.4315 

K2550.5008 

K2550.5015 

K2550.6008 

K2550.6015 

– J2551.4300 J2551.4300 J2551.6000 J2551.6000 

– J2552.4300 J2552.4300 J2552.6000 J2552.6000 

Logfit ® plastic coping, 

for crowns – J2553.4302 J2553.4302 J2553.6002 J2553.6002 

Logfit ® plastic coping, 

for bridge – J2553.4301 J2553.4301 J2553.6001 J2553.6001 

Bar abutment 0.5 

2.0 

4.0 

J2255.3305 

J2255.3320 

J2255.3805 

J2255.3820 

J2255.3840 

J2255.4305 

J2255.4320 

J2255.4340 

J2255.5005 

J2255.5020 

J2255.5040 

J2255.6005 

J2255.6020 

J2255.6040 

Impression post for 

bar abutment J2130.4300 J2130.4300 J2130.4300 J2130.6000 J2130.6000 

Healing cap for 

bar abutment J2030.4300 J2030.4300 J2030.4300 J2030.6000 J2030.6000 

Lab analog/ 

Soldering aid for 

bar abutment 

J3020.4300 J3020.4300 J3020.4300 J3020.6000 J3020.6000

Article GH 

in mm 

Abutments 

for hybrid 

restorations 

Ø 

3.3 mm 

Ø 

3.8 mm 

Ø 

4.3 mm 

Ø 

5.0 mm 

Ø 

6.0 mm 

Base for bar abutment, 

plastic, burn-out J2257.3300 J2257.3800 J2257.4300 J2257.5000 J2257.6000 


cast-on J2263.4300 J2263.4300 J2263.4300 J2263.6000 J2263.6000 


solderable 

J2258.4300 J2258.4300 J2258.4300 J2258.6000 J2258.6000 


Titanium, J2262.4300 J2262.4300 J2262.4300 J2262.6000 J2262.6000 

Titanium bonding base 

for bar abutment J2260.3300 J2260.3800 J2260.4300 J2260.5000 J2260.6000 

Sleeve for titanium 

bonding base J2261.3300 J2261.3800 J2261.4300 J2261.5000 J2261.6000 

Ball abutment set, 

incl. male part 

Ball abutment, 

male part 

1.5 

3.0 

4.5 

1.5 

3.0 

4.5 

J2250.3315 

J2250.3330 

J2249.3315 

J2249.3330 

J2250.3815 

J2250.3830 

J2250.3845 

J2249.3815 

J2249.3830 

J2249.3845 

J2250.4315 

J2250.4330 

J2250.4345 

J2249.4315 

J2249.4330 

J2249.4345 


J2250.5015 

J2250.5030 

J2250.5045 

J2249.5015 

J2249.5030 

J2249.5045 

Ball abutment 

lab analog J3015.3300 J3015.3800 J3015.4300 J3015.5000 – 

– 

– 

43

44 


Article GH 

in mm 

Abutments 

for hybrid 

restorations 

PS 

Locator ® abutment 1.0 

2.0 

3.0 

4.0 

5.0 

6.0 

Locator ® 

impression cap 

Locator ® analog 4.0 

5.0 

Locator ® male processing 

packages 





implants Article No. K 

Telescope abutment 

for double crown 

restorations 

2 Pack 

10 Pack 08519-02-CB 

08519-10-CB 


Ø 

3.3 mm 

08401-CB 

08402-CB 

08403-CB 

08404-CB 

08405-CB 

08406-CB 

Ø 

3.8 mm 

08970-CB 

08971-CB 

08972-CB 

08973-CB 

08974-CB 

08975-CB 

08519-02-CB 

08519-10-CB 

Ø 

4.3 mm 

08976-CB 

08977-CB 

08978-CB 

08979-CB 

08980-CB 

08981-CB 

08519-02-CB 

08519-10-CB 

Ø 

5.0 mm 

08982-CB 

08983-CB 

08984-CB 

08985-CB 

08986-CB 

08987-CB 

08519-02-CB 

08519-10-CB 

Ø 

6.0 mm 

08505-CB 08505-CB 08505-CB 08505-CB – 

08505-CB 08505-CB 08505-CB 08505-CB – 

08519-02-CB 

08519-10-CB 

K2211.3300 K2211.3800 K2211.4300 K2211.5000 K2211.6000 

– K2201.3800 K2201.4300 K2201.5000 K2201.6000 

– K2212.3800 K2212.4300 K2212.5000 K2212.6000 

–

46 

Prosthetics 

Torque Wrench Settings for final Fixation of Surgical Components 

and Suprastructures 

Article Ø 

J5320.1030 

in mm 

Implant cover screw: tightened by hand 

Healing caps (incl. PS): 

cylindrical 

wide body 

bottleneck 

Lab screw: 


(incl. PS) 

Scanbody 

Abutment screw: 20 Ncm 

Esthomic ® abutment, 

straight (incl. PS) 


angled 15°/20° (incl. PS) 

Esthomic ® abutment, Inset 

Universal abutment (incl. PS) 


Titanium Bases CAD/CAM 


Logfit ® abutment 


(from left to right) 

J4006.1601 

(Ø 3.3/3.8/4.3 mm) 

J4005.1601 

(Ø 3.3/3.8/4.3 mm) 

J4006.2001 

(Ø 5.0/6.0 mm) 

J4005.2001 

(Ø 5.0/6.0 mm) 

All screws have to be tightened after at least 5 minutes with the corresponding torque! 

J5316.0510 (hex, extra short) 

J5316.0501 (hex, short) 

J5316.0502 (hex, long)

Article Ø 

J5320.1030 

in mm 

Bar abutment: 

Healing cap 

for bar abutment: 

J4005.1602 

J4005.2002 

Prosthetic screw: 15 Ncm 

Bases for bar abutment 

Titanium bonding base 


Torque Wrench Settings for final Fixation of Surgical Components 

and Suprastructures 

(Ø 3.3/3.8/4.3 mm) 

(Ø 5.0/6.0 mm) 

All screws have to be tightened after at least 5 minutes with the corresponding torque! 

3.3 

3.8/4.3/ 

5.0/6.0 

tightened by hand 

Ball abutment: 20 Ncm 3.3 

Locator ® abutment: 20 Ncm 3.3 

J5300.0020 

(Ø 3.3/3.8/4.3 mm) 

J5300.0027 

(Ø 3.3/3.8/4.3 mm) 

J5316.0510 (hex, extra short) 

08929-CB J5300.0011 

J5316.0501 (hex, short) 

J5300.0025 

(Ø 5.0/6.0 mm) 

J5300.0028 

(Ø 5.0/6.0 mm) 

J5316.0502 (hex, long) 

20 Ncm 

30 Ncm 

30 Ncm 

30 Ncm 

3.8/4.3/ 

5.0 

3.8/4.3/ 

5.0 

47

48 

Prosthetics 

Impression taking, Bite registration, Fabrication of the Plaster Model 

Impression taking 


in mm 

Impression post, open tray 

(The fixing screw can be shortened extra-oral by 3 mm with a screwdriver, hex) 

K2121.3300 

(840-6752) 

K2121.3800 

(840-6753) 

K2121.4300 

(840-6754) 

K2121.5000 

(840-6755) 

K2121.6000 

(840-6756) 


open tray, 

incl. fixing screw 

Impression post PS, open tray, for Platform Switching 

(The fixing screw can be shortened extra-oral by 3 mm with a screwdriver, hex) 

K2119.3800 

(114-5015) 

K2119.4300 

(114-5016) 

K2119.5000 

(114-5017) 

K2119.6000 

(114-5018) 


open tray, 

incl. fixing screw 

PS 

Dimension 

in mm 

Material 

3.3 21.0/24.0 Titanium alloy 









Note: Impression posts PS should only be used for impression taking on SCREW-LINE implants with 

K article number!


Impression taking 


in mm 

Impression post, closed tray 

K2110.3300 

(840-6745) 

K2110.3800 

(840-6748) 

K2110.4300 

(840-6749) 

K2110.5000 

(840-6750) 

K2110.6000 

(840-6751) 


closed tray, 

incl. impression cap, bite 

registration cap and fixing screw, 

prosthetic height 10.7 mm 

Impression post PS, closed tray, for Platform Switching 

K2109.3800 

(114-5011) 

K2109.4300 

(114-5012) 

K2109.5000 

(114-5013) 

K2109.6000 

(114-5014) 


closed tray, 

incl. impression cap, bite 

registration cap and fixing screw, 

prosthetic height 10.7 mm 

PS 

Dimension 

in mm 

Material 










Note: Impression posts PS should only be used for impression taking on SCREW-LINE implants with 

K article number! 

Spare impression cap for impression post, closed tray 

J2111.3300 

(840-0134) 

J2111.3800 

(840-0135) 

J2111.4300 

(840-0136) 

J2111.5000 

(840-0137) 

J2111.6000 

(840-0138) 

Impression cap, 

(5 units) 

3.3 – POM 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 

POM: Polyoxymethylene 

49

50 

Prosthetics 



in mm 

Bite registration 

Bite registration post, incl. bite registration cap 

J2140.3300 

(114-4955) 

J2140.3800 

(114-5956) 

J2140.4300 

(114-5957) 

J2140.5000 

(114-5958) 

J2140.6000 

(114-5959) 

Spare bite registration cap 

J2112.3300 

(840-0139) 

J2112.3800 

(840-0140) 

J2112.4300 

(840-0141) 

J2112.5000 

(840-0142) 

J2112.6000 

(840-0143) 

Fabrication of the plaster model 

Lab analog for CAMLOG ® abutments 

Bite registration post, 

incl. fixing screw and bite 

registration cap, prosthetic 

height 8.1 mm 

(also for Platform Switching) 

Bite registration cap, 

(5 units) 

Dimension 

in mm 

Material 

3.3 – Titanium alloy/POM 





3.3 – POM 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 

J3010.3300 

(840-0277) Lab analog 3.3 – Titanium alloy 

J3010.3800 

(840-0278) 

J3010.4300 

(840-0279) 

J3010.5000 

(840-0280) 

J3010.6000 

(840-0281) 





POM: Polyoxymethylene


in mm 

Temporary abutment (PEEK) 

K2241.3800 

(840-6829) 

K2241.4300 

(840-6830) 

K2241.5000 

(840-6832) 

K2241.6000 

(840-6833) 

Temporary abutment, 

preparable, 

incl. abutment screw 

Temporary abutment PS (PEEK), for Platform Switching 

K2208.3800 

(114-5035) 

K2208.4300 

(114-5036) 

K2208.5000 

(114-5037) 

K2208.6000 

(114-5038) 

Temporary abutment PS, 

preparable, 


PS 

Crown and Bridge Restorations 

Temporary restoration 

Dimension 

in mm 

Material 

3.8 – PEEK 

4.3 – PEEK 

5.0 – PEEK 

6.0 – PEEK 

3.8 – PEEK 

4.3 – PEEK 

5.0 – PEEK 

6.0 – PEEK 

PEEK: Polyetheretherketone 

Note: Temporary abutments PS should only be used on SCREW-LINE implants with K article number! 

51

52 

Prosthetics 

Esthomic ® abutments for cemented crown and bridge restorations 


in mm 

Esthomic ® abutments, straight 

K2226.3810 

(840-6769) 

K2226.3830 

(840-6770) 

K2226.4310 

(840-6771) 

K2226.4330 

(840-6772) 

K2226.5010 

(840-6773) 

K2226.5030 

(840-6775) 

K2226.6010 

(840-6776) 

K2226.6030 

(840-6777) 

Esthomic ® abutment, straight, 

preparable, 


Esthomic ® abutments PS, straight, for Platform Switching 

K2202.3815 

(114-5023) 

K2202.4315 

(114-5024) 

K2202.5015 

(114-5025) 

K2202.6015 

(114-5026) 

Esthomic ® abutments, 15° angled, type A 

K2227.3810 

(840-6778) 

K2227.3830 

(840-6779) 

K2227.4310 

(840-6780) 

K2227.4330 

(840-6781) 

K2227.5010 

(840-6782) 

K2227.5030 

(840-6783) 

K2227.6010 

(840-6784) 

K2227.6030 

(840-6785) 


straight, 

preparable, 


PS 


15° angled, type A, 

preparable, 


GH 

in mm 

3.8 1.0-1.8 

3.0-4.5 

4.3 1.0-1.8 

3.0-4.5 

5.0 1.0-1.8 

3.0-4.5 

6.0 1.0-1.8 

3.0-4.5 

3.8 1.0-1.8 

3.0-4.5 

4.3 1.0-1.8 

3.0-4.5 

5.0 1.0-1.8 

3.0-4.5 

6.0 1.0-1.8 

3.0-4.5 


Material 





3.8 1.5-2.5 Titanium alloy 




Note: Esthomic ® abutments PS should only be used on SCREW-LINE implants with K article number! 




Titanium alloy




in mm 

Esthomic ® abutments PS, 15° angled, type A, for Platform Switching 

K2203.3815 

(114-5027) 

K2203.4315 

(114-5028) 

K2203.5015 

(114-5029) 

K2203.6015 

(114-5030) 



preparable, 


PS 

GH 

in mm 

Material 






Esthomic ® abutments, 15° angled, type B 

K2228.3810 

(840-6786) 

K2228.3830 

(840-6787) 

K2228.4310 

(840-6794) 

K2228.4330 

(840-6795) 

K2228.5010 

(840-6796) 

K2228.5030 

(840-6798) 

K2228.6010 

(840-6799) 

K2228.6030 

(840-6800) 


15° angled, type B, 

preparable, 


Esthomic ® abutments PS, 15° angled, type B, for Platform Switching 

K2204.3815 

(114-5031) 

K2204.4315 

(114-5032) 

K2204.5015 

(114-5033) 

K2204.6015 

(114-5034) 



preparable, 


PS 

3.8 1.0-1.8 

3.0-4.5 

4.3 1.0-1.8 

3.0-4.5 

5.0 1.0-1.8 

3.0-4.5 

6.0 1.0-1.8 

3.0-4.5 











53

54 

Prosthetics 


Art. No. Article Ø GH Material 

Esthomic ® abutments, 20° angled, type A 

K2231.3810 

(840-6801) 

K2231.3830 

(840-6802) 

K2231.4310 

(840-6803) 

K2231.4330 

(840-6805) 

K2231.5010 

(840-6806) 

K2231.5030 

(840-6807) 

K2231.6010 

(840-6808) 

K2231.6030 

(840-6809) 



preparable, 


Esthomic ® abutments, 20° angled, type B 

K2232.3810 

(840-6811) 

K2232.3830 

(840-6813) 

K2232.4310 

(840-6814) 

K2232.4330 

(840-6815) 

K2232.5010 

(840-6816) 

K2232.5030 

(840-6818) 

K2232.6010 

(840-6820) 

K2232.6030 

(840-6821) 

Esthomic ® abutments, Inset 

K2235.3315 

(840-6822) 

K2235.3815 

(840-6824) 

K2235.4315 

(840-6825) 

K2235.5015 

(840-6826) 

K2235.6015 

(840-6828) 



preparable, 


Esthomic ® abutment, Inset, 

preparable, 


3.8 1.0-1.8 

3.0-4.5 

4.3 1.0-1.8 

3.0-4.5 

5.0 1.0-1.8 

3.0-4.5 

6.0 1.0-1.8 

3.0-4.5 

3.8 1.0-1.8 

3.0-4.5 

4.3 1.0-1.8 

3.0-4.5 

5.0 1.0-1.8 

3.0-4.5 

6.0 1.0-1.8 

3.0-4.5 














GH: gingiva height

Specification Esthomic ® abutments types A and B 

Type A 

Cam alignment 

against the angle 

Type B 

Cam alignment in direction 

toward the angle 


Type A Type B 

Cams with 60° offset 

Universal abutment for cemented crown and bridge restorations and double crown restorations 


in mm 


K2211.3300 

(840-6757) 

K2211.3800 

(840-6760) 

K2211.4300 

(840-6761) 

K2211.5000 

(840-6762) 

K2211.6000 

(840-6763) 

Universal abutment, 

preparable, 


*only for crown restorations in the region of the upper lateral, lower lateral, and central incisors 

Universal abutment PS for Platform Switching 

K2201.3800 

(114-5019) 

K2201.4300 

(114-5020) 

K2201.5000 

(114-5021) 

K2201.6000 

(114-5022) 


preparable, 


PS 

Dimension 

in mm 

Material 

3.3* – Titanium alloy 










Note: Universal abutments PS should only be used on SCREW-LINE implants with K article number! 

60° 

55

56 

Prosthetics 


Gold-plastic abutments for cemented crown and bridge restorations 


in mm 

Gold-plastic abutments 

K2246.3300 

(840-6854) 

K2246.3800 

(840-6855) 

K2246.4300 

(840-6856) 

K2246.5000 

(840-6857) 

K2246.6000 

(840-6858) 

Gold-plastic abutment, 

cast-on, 


*only for crown restorations in the region of the upper lateral, lower lateral, and central incisors. 

3.3* 

3.8 

4.3 

5.0 

6.0 

Dimension 

in mm 

Noble metal 

weight approx. 

0.42 g 

Noble metal 


0.46 g 

Noble metal 


0.65 g 

Noble metal 


0.81 g 

Noble metal 


0.89 g 

Material 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Titanium bases CAD/CAM for individual mesostructures 

Titanium bases CAD/CAM, for the fabrication of mesostructures with the aid of CAD/CAM technologies 

K2244.3348 

(840-6849) 

K2244.3848 

(840-6850) 

K2244.4348 

(840-6851) 

K2244.5048 

(840-6852) 

K2244.6048 

(840-6853) 

Titanium base CAD/CAM, 


*only for mesostructures in the region of the upper lateral, lower lateral, and central incisors. 








in mm 

Ceramic abutments, 2-parts, for bonded/cemented full ceramic crowns 

K2242.3340 

(840-6835) 

K2242.3840 

(840-6838) 

K2242.4340 

(840-6842) 

K2242.5040 

(840-6845) 

K2242.6040 

(840-6847) 

Zirconium oxide sleeves 

J2242.3341 

(840-0194) 

J2242.3841 

(840-0197) 

J2242.4341 

(840-0200) 

J2242.5041 

(840-0203) 

J2242.6041 

(840-0206) 

Titanium bases 

K2242.3342 

(840-6837) 

K2242.3842 

(840-6841) 

K2242.4342 

(840-6844) 

K2242.5042 

(840-6846) 

K2242.6042 

(840-6848) 

Ceramic abutment, 

preparable, 

incl. titanium base, zirconium 

oxide sleeve and abutment screw 

Zirconium oxide sleeve, 

for ceramic abutment, 

preparable 

Titanium base, 

for ceramic abutment 

*only for crown restorations in the region of the upper lateral, lower lateral, and central incisors. 


Ceramic abutments for crown restorations 

Dimension 

in mm 

3.3* – 

3.8 – 

4.3 – 

5.0 – 

6.0 – 

Material 

Titanium alloy/ 

Zirconium oxide 









3.3* – Zirconium oxide 

3.8 – Zirconium oxide 









57

58 

Prosthetics 

Logfit ® prosthetic system for cemented crown and bridge restorations 


in mm 

Logfit ® abutments 

K2550.3808 

(840-6859) 

K2550.3815 

(840-6860) 

K2550.4308 

(840-6861) 

K2550.4315 

(840-6862) 

K2550.5008 

(840-6865) 

K2550.5015 

(840-6866) 

K2550.6008 

(840-6867) 

K2550.6015 

(840-6868) 

Logfit ® impression caps 

J2551.4300 

(840-6097) 

J2551.4300 

(840-6097) 

J2551.6000 

(840-6098) 

J2551.6000 

(840-6098) 


J2552.4300 

(840-6099) 

J2552.4300 

(840-6099) 

J2552.6000 

(840-6100) 

J2552.6000 

(840-6100) 

Logfit ® abutment, 


GH 

in mm 

3.8 0.8 

1.5 

4.3 0.8 

1.5 

5.0 0.8 

1.5 

6.0 0.8 

1.5 


Material 

Logfit ® impression cap 3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 





Logfit ® analog 3.8 – Titanium alloy 






Logfit ® prosthetic system for cemented crown and bridge restorations 


in mm 

Logfit ® plastic coping, for crowns (with rotation securing feature) 

J2553.4302 

(840-6104) 

J2553.4302 

(840-6104) 

J2553.6002 

(840-6107) 

J2553.6002 

(840-6107) 

Logfit ® plastic coping crown, 

burn-out 

Logfit ® plastic coping, for bridges (without rotation securing feature) 

J2553.4301 

(840-6103) 

J2553.4301 

(840-6103) 

J2553.6001 

(840-6106) 

J2553.6001 

(840-6106) 

Logfit ® plastic coping bridge, 

burn-out 

Accessories for CAMLOG ® abutments 

Abutment screws for the final fixation of abutments into the implant 

J4005.1601 

(840-0327) 

J4005.2001 

(840-0332) 

Abutment screw, hex 

Lab screws for the fixation of abutments on the working model 

J4006.1601 

(840-6108) 

J4006.2001 

(840-6110) 

Lab screw, hex, 

brown anodized 

Note: Lab screws used on working models only. 

Dimension 

in mm 

Material 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 

3.3 

3.8 

4.3 

5.0 

6.0 

3.3 

3.8 

4.3 

Thread 

M 1.6 

Thread 

M 2.0 

Thread 

M 1.6 

5.0 Thread 

6.0 

M 2.0 






59

60 

Prosthetics 

Bar restorations 


in mm 

Bar abutments 

J2255.3305 

(840-0228) 

J2255.3320 

(840-0229) 

J2255.3805 

(840-0231) 

J2255.3820 

(840-0232) 

J2255.3840 

(840-0233) 

J2255.4305 

(840-0234) 

J2255.4320 

(840-0235) 

J2255.4340 

(840-0236) 

J2255.5005 

(840-0237) 

J2255.5020 

(840-0238) 

J2255.5040 

(840-0239) 

J2255.6005 

(840-0240) 

J2255.6020 

(840-0241) 

J2255.6040 

(840-0242) 

Impression posts for bar abutment 

J2130.4300 

(840-4976) Impression posts for 

J2130.4300 

bar abutment 

(840-4976) 

J2130.4300 

(840-4976) 

J2130.6000 

(840-6010) 

J2130.6000 

(840-6010) 

Healing caps for bar abutment 

J2030.4300 

(840-6644) Healing cap for 

J2030.4300 

bar abutment 

(840-6644) 

J2030.4300 

(840-6644) 

J2030.6000 

(840-7257) 

J2030.6000 

(840-7257) 

GH 

in mm 

Bar abutment 3.3 0.5 

2.0 

3.8 

4.3 

5.0 

6.0 

0.5 

2.0 

4.0 

0.5 

2.0 

4.0 

0.5 

2.0 

4.0 

0.5 

2.0 

4.0 

Material 
















GH: gingiva height


in mm 

Lab analog/soldering aid for bar abutment 

J3020.4300 

(840-0286) 

J3020.4300 

(840-0286) 

J3020.4300 

(840-0286) 

J3020.6000 

(840-0287) 

J3020.6000 

(840-0287) 

Soldering aid 


Screws for bases, bar abutments, impression taking, open tray, and soldering 

J4005.1610 

(840-0331) 

J4005.2010 

(840-0336) 

Bases for bar abutment, plastic, burn-out 

J2257.3300 

(840-4860) 

J2257.3800 

(840-0243) 

J2257.4300 

(840-0244) 

J2257.5000 

(840-0245) 

J2257.6000 

(840-0246) 

Screw, hex, 

for bar abutment, 

impression taking, open tray, 

and for soldering aid 


burn-out 

Dimension 

in mm 

Hybrid Restorations 


Material 






3.3 

3.8 

4.3 

5.0 

6.0 

Thread 

M 1.6 

Thread 

M 2.0 

3.3 – POM 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 




61

62 

Prosthetics 



in mm 

Bases for bar abutment, cast-on 

J2263.4300 

(840-0261) 

J2263.4300 

(840-0261) 

J2263.4300 

(840-0261) 

J2263.6000 

(840-0262) 

J2263.6000 

(840-0262) 

Bases for bar abutment, solderable 

J2258.4300 

(840-0247) 

J2258.4300 

(840-0247) 

J2258.4300 

(840-0247) 

J2258.6000 

(840-0248) 

J2258.6000 

(840-0248) 


solderable 

Bases for bar abutment, titanium, laser-weldable 

J2262.4300 

(840-0259) 

J2262.4300 

(840-0259) 

J2262.4300 

(840-0259) 

J2262.6000 

(840-0260) 

J2262.6000 

(840-0260) 


cast-on 


laser-weldable 

3.3 

3.8 

4.3 

5.0 

6.0 

3.3 – 

3.8 – 

4.3 – 

5.0 – 

6.0 – 

Weight Material 

Noble metal 


0.48 g 

Noble metal 


0.48 g 

Noble metal 


Noble metal 


0.70 g 

Noble metal 


0.70 g 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Cast-on gold 

alloy/POM 

Solderable 

gold alloy 

Solderable 

gold alloy 

Solderable 

gold alloy 

Solderable 

gold alloy 

Solderable 

gold alloy 

3.3 – Titanium Grade 4 







in mm 

Titanium bonding bases for bar abutment 

J2260.3300 

(840-0249) 

J2260.3800 

(840-0250) 

J2260.4300 

(840-0251) 

J2260.5000 

(840-0252) 

J2260.6000 

(840-0253) 

Sleeves for titanium bonding base 

J2261.3300 

(840-0254) 

J2261.3800 

(840-0255) 

J2261.4300 

(840-0256) 

J2261.5000 

(840-0257) 

J2261.6000 

(840-0258) 

Holding pin for bar 

Titanium bonding base for 

bar abutment, 

Passive-Fit 

Sleeve for titanium bonding 

base, 

burn-out, Passive-Fit 

J2256.1600 Holding pin for bar, 

bar abutment/soldering aid 

bar abutment, yellow, thread 

M 1.6 (4 units) 

J2256.2000 

Prosthetic screws for bases for bar abutments/sleeves 

J4005.1602 

(840-0328) 

J4005.2002 

(840-0333) 

Holding pin for bar, 

for bar abutment/soldering aid 

for bar abutment, blue, for 

thread M 2.0 (4 units) 

Prosthetic screw for bar 

abutment, hex, 

(also for Passive-Fit) 

Dimension 

in mm 



Material 






3.3 – POM 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 

3.3 

3.3 

3.8 

4.3 

5.0 

6.0 

– POM 

3.8 – POM 

4.3 – POM 

5.0 – POM 

6.0 – POM 

Thread 

M 1.6 

Thread 

M 2.0 



63

64 

Prosthetics 

Ball abutment anchoring system 


in mm 

Ball abutment sets 

J2250.3315 

(840-0216) 

J2250.3330 

(840-0217) 

J2250.3815 

(840-0219) 

J2250.3830 

(840-0220) 

J2250.3845 

(840-0221) 

J2250.4315 

(840-0222) 

J2250.4330 

(840-0223) 

J2250.4345 

(840-0224) 

J2250.5015 

(840-0225) 

J2250.5030 

(840-0226) 

J2250.5045 

(840-0227) 

Ball abutments 

J2249.3315 

(115-2219) 

J2249.3330 

(115-2222) 

J2249.3815 

(115-2223) 

J2249.3830 

(115-2225) 

J2249.3845 

(115-2226) 

J2249.4315 

(115-2227) 

J2249.4330 

(115-2228) 

J2249.4345 

(115-2230) 

J2249.5015 

(115-2231) 

J2249.5030 

(115-2232) 

J2249.5045 

(115-2233) 

Ball abutment set, incl. 

male part und matrix 

CM Dalbo ® -Plus, 

red duplication aid/spacer, 

stabilizing ring and ball 

abutment analog 

Ball abutment, male part 

Dalbo ® -Plus is a registered trademark of Cendres + Métaux SA, Biel, Switzerland. 

3.3 

3.8 

4.3 

5.0 

3.3 

3.8 

4.3 

5.0 

GH 

in mm 

1.5 

3.0 

1.5 

3.0 

4.5 

1.5 

3.0 

4.5 

1.5 

3.0 

4.5 

1.5 

3.0 

1.5 

3.0 

4.5 

1.5 

3.0 

4.5 

1.5 

3.0 

4.5 


Material 


Titanium Grade 4/ 

Gold alloy/Brass/ 

Plastic 




Plastic 




Plastic 




Plastic 







in mm 

Spare matrix CM Dalbo ® -Plus 

J2250.0005 Matrix CM Dalbo ® -Plus, 

(840-0213) 

for ball abutment, incl. lamella 

retention insert 

Spare lamella retention insert 

J2250.0007 Lamella retention insert, 

for matrix CM Dalbo ® (840-0214) 

-Plus 

Ball abutment analogs 

J3015.3300 

(840-0282) 

J3015.3800 

(840-0283) 

J3015.4300 

(840-0284) 

J3015.5000 

(840-0285) 

Ball abutment analog 

incl. stabilizing ring 


Ball abutment anchoring system 

Dimension 

in mm 

3.3 – 

3.8 – 

4.3 – 

5.0 – 

Material 


Gold alloy 


Gold alloy 


Gold alloy 


Gold alloy 

3.3 – Gold alloy 




3.3 – Brass/Plastic 




GH: gingiva height TiN: Titanium nitride-coated 

65

66 

Prosthetics 

Locator ® anchoring system 


in mm 

Locator ® abutments 

08401-CB 

(840-6884) 

08402-CB 

(840-6885) 

08403-CB 

(840-9661) 

08404-CB 

(840-6886) 

08405-CB 

(840-6887) 

08406-CB 

(840-6889) 

08970-CB 

(840-5264) 

08971-CB 

(840-7983) 

08972-CB 

(840-5279) 

08973-CB 

(840-7805) 

08974-CB 

(840-5577) 

08975-CB 

(840-8152) 

08976-CB 

(840-5280) 

08977-CB 

(840-9456) 

08978-CB 

(840-7875) 

08979-CB 

(840-5281) 

08980-CB 

(840-5282) 

08981-CB 

(840-5550) 

08982-CB 

(840-8388) 

08983-CB 

(840-5283) 

08984-CB 

(840-5265) 

08985-CB 

(840-5397) 

08986-CB 

(840-5266) 

08987-CB 

(840-5267) 

Locator ® abutment for 

CAMLOG ® implants 

3.3 

3.8 

4.3 

5.0 

GH 

in mm 

1.0 

2.0 

3.0 

4.0 

5.0 

6.0 

1.0 

2.0 

3.0 

4.0 

5.0 

6.0 

1.0 

2.0 

3.0 

4.0 

5.0 

6.0 

1.0 

2.0 

3.0 

4.0 

5.0 

6.0 

Material 

Titanium alloy/TiN 



Titanium alloy/TiN


in mm 

Locator ® analog 

08530-CB Locator ® analog 

(840-5262) 

(4 units) 

08516-CB 

(840-5257) 

Locator ® impression cap 

08505-CB Locator ® impression cap 

(840-5278) 

(4 units) 

Locator ® male processing packages 

08519-02-CB 

(840-7629) 

(2 units) 

08519-10-CB 

(840-5259) 

(10 units) 

(840-9614) 

Locator ® replacement males 

Locator ® male processing 

packages 

Contents per unit: 

1 Titanium housing with 

processing replacement male 

1 Block out spacer white 

1 Replacement male clear 

1 Replacement male pink 

1 Replacement male blue 

08524-CB Locator ® replacement male, 

clear, STRONG, Div.: 0°-10° 

(4 units) 



Dimension 

in mm 

Material 

3.3 – Aluminum 




3.3 – 

3.8 – 

4.3 – 

5.0 – 

3.3 – 

3.8 – 

4.3 – 

5.0 – 

Aluminum/ 

Polyethylene 

Aluminum/ 

Polyethylene 

Aluminum/ 

Polyethylene 

Aluminum/ 

Polyethylene 

3.3 – Nylon 

3.8 – Nylon 

4.3 – Nylon 

5.0 – Nylon 


Polyethylene/ 

Teflon/Nylon 


Polyethylene/ 

Teflon/Nylon 


Polyethylene/ 

Teflon/Nylon 


Polyethylene/ 

Teflon/Nylon 

GH: gingiva height TiN: Titanium nitride-coated 

67

68 

Prosthetics 



in mm 

08527-CB Locator 

(840-5260) 

® replacement male, 

pink, MEDIUM, Div.: 0°-10° 

(4 units) 

Locator ® replacement males 

08529-CB Locator ® replacement male, 

(840-7896) 

blue, LIGHT, Div.: 0°-10° 

(4 units) 

Locator ® replacement males for extended range 

08547-CB Locator ® replacement male 

(840-5263) 

for extended range*, 

green, STRONG,, Div.: 10°-20° 

(4 units) 



orange, MEDIUM, Div.: 10°-20° 

(4 units) 


(840-6509) 


red, LIGHT, Div.: 10°-20° 

(4 units) 

Manufacturer Locator ® : 

Zest Anchors, Inc. 

Escondido, CA 92029, USA 

Locator ® is a registered trademark of Zest Anchors, Inc. 

* nonlicensed for implant diameter 3.3 mm 

Dimension 

in mm 

Material 

3.3 – Nylon 

3.8 – Nylon 

4.3 – Nylon 

5.0 – Nylon 

3.3 – Nylon 

3.8 – Nylon 

4.3 – Nylon 

5.0 – Nylon 

3.8 – Nylon 

4.3 – Nylon 

5.0 – Nylon 

3.8 – Nylon 

4.3 – Nylon 

5.0 – Nylon 

3.8 – Nylon 

4.3 – Nylon 

5.0 – Nylon


Double crown restorations with Universal and Telescope abutments 


in mm 

Universal abutment for double crown restorations 

K2211.3300 

(840-6757) 

K2211.3800 

(840-6760) 

K2211.4300 

(840-6761) 

K2211.5000 

(840-6762) 

K2211.6000 

(840-6763) 

Universal abutment PS for double crown restorations, for Platform Switching 

K2201.3800 

(114-5019) 

K2201.4300 

(114-5020) 

K2201.5000 

(114-5021) 

K2201.6000 

(114-5022) 


preparable, 


PS 





Note: Universal abutments PS should only be used on SCREW-LINE implants with K article number! 

Telescope abutments for double crown restorations 

K2212.3800 

(840-6764) 

K2212.4300 

(840-6765) 

K2212.5000 

(840-6766) 

K2212.6000 

(840-6767) 

Universal abutment, 

preparable, 


Telescope abutment, 

preparable, 


Dimension 

in mm 

Material 










69

70 

Prosthetics 


Accessories for CAMLOG ® abutments 


in mm 

Abutment screws for the final fixation of abutments into the implant 

J4005.1601 

(840-0327) 

J4005.2001 

(840-0332) 


Lab screws for the fixation of abutments on the working model 

J4006.1601 

(840-6108) 

J4006.2001 

(840-6110) 

Lab screw, hex, 

brown anodized 

Note: Lab screws are to be used on working models only. 

3.3 

3.8 

4.3 

Dimension 

in mm 

Thread 

M 1.6 

5.0 Thread 

M 2.0 

6.0 

3.3 

3.8 

4.3 

Thread 

M 1.6 

5.0 Thread 

M 2.0 

6.0 

Material 




Titanium alloy


in mm 

Instruments for Dental Technicians 

GH 

in mm 

Scanbody, for optical 3-dimensional localization of lab analogs in the working model 

K2600.3310 

(115-2220) 

K2600.3810 

(115-2224) 

K2600.4310 

(115-2234) 

K2600.6010 

(115-2235) 

Universal holder 

J3709.0010 

(840-0314) 

J3709.0015 

(840-0315) 

Scanbody, for Ø 3.3 mm, 

incl. lab screw 





Scanbody, for Ø 5.0/6.0 mm, 


Universal holder, 

incl. 2 lab screws, hex, 

and abutment collects for 

Ø 3.3/3.8/4.3/5.0/6.0 mm, 

for grinding abutments 

Material 

3.3 – PEEK 

3.8 – PEEK 

4.3 – PEEK 

5.0 – PEEK 

6.0 – PEEK 

– – Stainless steel/ 


Universal holder – – Stainless steel 

PEEK: Polyetheretherketone 

71

72 

Prosthetics 



in mm 

Abutment collets 

J3709.3300 

(840-0316) 

J3709.3800 

(840-0317) 

J3709.4300 

(840-0318) 

J3709.5000 

(840-0319) 

J3709.6000 

(840-0320) 

Collet for zirconium oxide sleeve 

J3712.4300 

(840-0325) 

J3712.6000 

(840-0326) 

Abutment collets, 

for universal holder 

Collet for zirconium oxide 

sleeve, 

for universal holder, 

for Ø 3.3/3.8/4.3 mm 

Collet for zirconium oxide 

sleeve, 

for universal holder, 

for Ø 5.0/6.0 mm 

Material 






3.3 PEEK 

3.8 PEEK 

4.3 PEEK 

5.0 PEEK 

6.0 PEEK 

PEEK: Polyetheretherketone

J3711.0020 

(840-0323) J3711.0025 

J3711.0025 

(840-0324) 

Reworking reamer, 

for base for bar abutment, 

screw seat, burn-out 




Instrumente 

Prothetische Instrumente 


Artikel-Nr. Art. No. Artikel Article Ø Material Ø 

in mm in mm 

J3706.3300 

(840-0309) 

J3706.3800 

(840-0310) 

J3706.4300 

(840-0311) 

J3706.5000 

(840-0312) 

J3706.6000 

(840-0313) 

J3711.0010 Reworking reamers 

J3711.0010 

(840-0321) 

J3711.0015 

J3711.0015 

(840-0322) 

J3711.0020 

Gipsfräser Reamer for für dilating Universalhalter, the plaster 

inkl. model, farbkodiertem for universal Führungsstift holder, 

incl. color-coded guide pin 

Nacharbeitungsinstrument, 

Basis für Stegaufbau, 

Planfläche/Konus, Reworking reamer, ausbrennbar 


plane surface/cone seat, burn-out 


Nacharbeitungsinstrument, 


Basis plane für surface/cone Stegaufbau, seat, burn-out 

Schraubensitz, ausbrennbar 

3.3 

3.8 

4.3 

5.0 

6.0 

Stainless 3.3 steel/ 










3.3/3.8/4.3 



5.0/6.0 



3.3/3.8/4.3 


3.3 Stainless 

5.0/6.0 

steel 





Preis in EUR 

(ohne MwSt.) 

50,- 

50,- 

50,- 

50,- 

50,- 

75,- 

75,- 

65,- 

65,- 

73

74 

Prosthetics 

Esthomic ® Selection abutments 


in mm 

K8011.1000 

(114-5058) 

K3526.3810 

(114-5039) 

K3526.3830 

(114-5040) 

K3526.4310 

(114-5041) 

K3526.4330 

(114-5042) 

K3526.5010 

(114-5043) 

K3526.5030 

(114-5044) 

K3526.3810 

K3526.3830 

K3526.4310 

K3526.4330 

K3526.5010 

K3526.5030 

K3527.3810 

K3527.4310 

K3527.5010 

K3528.3810 

K3528.4310 

K3528.5010 

K3531.3810 

K3531.4310 

K3531.5010 

K3532.3810 

K3532.4310 

K3532.5010 

CAMLOG ® selection abutment kit, 

Contents (2 units each): 

Esthomic ® selection abutment, straight 






Esthomic ® selection abutment, 15° angled, type A 



Esthomic ® selection abutment, 15° angled, type B 









Esthomic ® selection abutment, 

straight (2 units) 

Attention: Do not use selection abutments on patients! 

3.8 

3.8 

4.3 

4.3 

5.0 

5.0 

3.8 

4.3 

5.0 

3.8 

4.3 

5.0 

3.8 

4.3 

5.0 

3.8 

4.3 

5.0 

GH 

in mm 

3.8 1.0-1.8 

3.0-4.5 

4.3 1.0-1.8 

3.0-4.5 

5.0 1.0-1.8 

3.0-4.5 

Material 

POM 

POM 

POM 

GH: gingiva height POM: Polyoxymethylene


in mm 

K3527.3810 

(114-5045) 

K3527.4310 

(114-5046) 

K3527.5010 

(114-5047) 

K3528.3810 

(114-5048) 

K3528.4310 

(114-5049) 

K3528.5010 

(114-5050) 

K3531.3810 

(114-5051) 

K3531.4310 

(114-5052) 

K3531.5010 

(114-5053) 

K3532.3810 

(114-5054) 

K3532.4310 

(114-5055) 

K3532.5010 

(114-5056) 


15° angled, type A (2 units) 


15° angled, type B (2 units) 


20° angled, type A (2 units) 


20° angled, type B (2 units) 

Attention: Do not use selection abutments on patients! 

Esthomic ® Selection abutments 

GH 

in mm 

Material 

3.8 1.0-1.8 POM 

4.3 1.0-1.8 POM 

5.0 1.0-1.8 POM 

3.8 1.0-1.8 POM 

4.3 1.0-1.8 POM 

5.0 1.0-1.8 POM 

3.8 1.0-1.8 POM 

4.3 1.0-1.8 POM 

5.0 1.0-1.8 POM 

3.8 1.0-1.8 POM 

4.3 1.0-1.8 POM 

5.0 1.0-1.8 POM 

GH: gingiva height POM: Polyoxymethylene 

75

Auxiliary Articles 

Contents 

Implants for Practice 78 

Demonstration Models 78 

Macro Model 78 

CAMLOG Literature 79 

77

78 

Auxiliary Article 

Implants for Practice 


in mm 

K1049.3813 

(840-6720) 

K1049.4313-01 

(840-6720) 

Demonstration Models 

290125 

(840-7014) 

290126 

(840-6264) 

Macro Model 

K8010.1010 

(114-5057) 

SCREW-LINE implant, 


cover screw, for practice, 

yellow anodized 

SCREW-LINE implant, 


cover screw, for practice, 

red anodized (10 units) 

Attention: Do not use implants for practice on patients! 

Overdenture Model on Locator 

Abutments 

Crown and Bridge Model on Logfit 

and Esthomic Abutments 

Length 

in mm 

CAMLOG ® Macro model, 

Scale 3:1 

Contents: 

– 1 SCREW-LINE implant 

– 1 Esthomic ® abutment, straight 

– 1 Abutment screw, hex 

– 1 Screwdriver, hex 

– 1 Premolar, suitable for Esthomic ® abutment, 

straight 

– 1 Acrylic socket 

Material 

3.8 13 Titanium 

4.3 13 Titanium 

Plastic/ 

Stainless steel


J8005.0001 

(840-6221) 

J8005.0002 

(840-6222) 

Video CD 

Einzelzahn Regio 12/Single tooth lateral incisor, 

Deutsch/English (14 min.) 

Video CD 

Zahnloser Oberkiefer/Edentulous Maxilla, 

Deutsch/English (13 min.) 

Auxiliary Article 

CAMLOG Literature 

Call CAMLOG for product brochures and patient education material! 

79

Information 

Contents 

Materials 82 

Certificate 84 

81

82 

Information 

Materials 

Titanium Grade 4 Properties: 

Titanium alloy Ti6Al4V 

Cast-on gold alloy 


Chemical structure (in %): O 0.4 max. 

Fe 0.3 max. 

C 0.1 max. 

N 0.05 max. 

H 0.0125 max. 

Ti > 99.0 

Mechanical properties: Tensile strength 680 MPa min. 

Elongation 10 % 

Properties: 

Chemical structure (in %): AI 5.5 - 6.75 max. 

V 3.5 - 4.5 max. 

Fe 0.3 max. 

C 0.08 max. 

N 0.05 max. 

H 0.015 max. 

Ti ~ 90 

Mechanical properties: Tensile strength 860 MPa min. 

Elongation 10 % 

Properties: 

Chemical structure (in %): Au 60 

Pd 20 

Pt 19 

Ir 1 

Physical properties: Melting range 1400 - 1490 °C 

Density 17.5 g/cm3 E-Module 

Coefficient of thermal 

136 GPa 

expansion (25-500°C) 


11.9 µm/m·°C 

expansion (25-600°C) 12.2 µm/m·°C 

Color white 

Mechanical properties: drawn 

Hardness HV5 > 215 

Tensile strength (Rm) 

0.2% Elongation limit 

> 750 MPa 

(Rp 0.2%) > 650 MPa 

Elongation at break > 2%

Cast-on gold alloy 

Base for bar abutment 

Solderable gold alloy 

Base for bar abutment 


Properties: 

Chemical structure (in %): Au 60 

Pt 19 

Pd 20 

Ir 1 

Mechanical properties: Density 17.5 g/cm 3 

Color white 

Liquids 1490 °C 

Solids 


1400 °C 

expansion (25-500°C) 


12.5 µm/m·°C 

expansion (25-600°C) 12.6 µm/m·°C 

E-Module 136.000 GPa 

Properties: 

Chemical structure (in %): Au 70.00 

Pt 8.50 

Ag 13.40 

Pd - 

Cu 7.50 

Zn 0.50 

Ir 0.10 

Rh - 

Ru - 

Mechanical properties: Color yellow 

Melting range 895 - 1010 °C 

Properties: 

Hardness 

annealed HV5 170 

hardened HV5 295 

self hardened HV5 280 

hardened 

700 °C / 30 min. 

Hardness HV5 210 

0.2 % Elongation limit 450-570 MPa 

Elongation at break min 10 % 

Tensile strength MPa 530-650 

Chemical structure (in %): ZrO2 + HfO2 + Y2O3 > 99.0 

Y2O3 4.5 - 5.4 

HfO2 < 5 

AI2O3 < 0.5 

other oxides 6.0 g/cm3 Porosity, open 0.00 % 

Microstructure: 

Mean Linear intercept size < 0.6 µm 

3 pt. transversal strength ≥ 800 MPa 

Materials 

83

84 

Information 

Certificate 

Quality for users and patients 

ALTATEC GmbH as the manufacturer of the CAMLOG ® products 

is in all stages of its activities subject to the provisions 

set out by the Quality Protection System according to EN ISO 

13485:2003. 

This European Standard defines in detail the criteria that 

have to be met by full quality protection of a company in all 

its processes in order for this company to be certified. 

Medical products have to adhere to standards that are particularly 

demanding. They are defined in the European Standard 

ISO 13485, which we are also able to satisfy. 

We thereby ensure that the quality of our products and 

services meets the expectations of our customers, namely in 

a manner that is at all times monitored and retraceable. Our 

products fulfil the requirements for medical products in terms 

of product performance and patient safety, as they have been 

defined by the European Laws and Standards. Thus, all our 

legally controlled products carry the CE label. 

The products of the ALTATEC GmbH are in accordance with 

the strict requirements of the European Medical Device 

Directive 93/42/EEC for medical products and the Standards 

EN ISO 13485:2003.

Index 

Alphabetical 86 

Article numbers 93 

85

86 

Alphabetical 

Article Article No. Page Article Article No. Page 

A 

Abutment collets for universal holder 

Ø 3.3 mm .................................................................... J3709.3300 72 

Ø 3.8 mm .................................................................... J3709.3800 72 

Ø 4.3 mm .................................................................... J3709.4300 72 

Ø 5.0 mm .................................................................... J3709.5000 72 

Ø 6.0 mm .................................................................... J3709.6000 


72 

thread M 1.6 .......................................................... J4005.1601 59, 70 

thread M 2.0 .......................................................... J4005.2001 59, 70 

Adapter for screw implants, long 

for SCREW-LINE implants 

Ø 3.3 mm ................................................................... K5302.3310 35 

Ø 3.8 mm ................................................................... K5302.3810 

Adapter, 

35 

ISO shaft for angled handpiece/wrench........................... J5002.0010 

B 


35 

Ø 3.3 mm .................................................................... J3015.3300 65 

Ø 3.8 mm .................................................................... J3015.3800 65 

Ø 4.3 mm .................................................................... J3015.4300 65 

Ø 5.0 mm .................................................................... J3015.5000 


incl. male part and matrix CM Dalbo 

65 

® -Plus 

Ø 3.3 mm, GH 1.5 mm ................................................. J2250.3315 64 

Ø 3.3 mm, GH 3.0 mm ................................................. J2250.3330 64 

Ø 3.8 mm, GH 1.5 mm ................................................. J2250.3815 64 

Ø 3.8 mm, GH 3.0 mm ................................................. J2250.3830 64 

Ø 3.8 mm, GH 4.5 mm ................................................. J2250.3845 64 

Ø 4.3 mm, GH 1.5 mm ................................................. J2250.4315 64 

Ø 4.3 mm, GH 3.0 mm ................................................. J2250.4330 64 

Ø 4.3 mm, GH 4.5 mm ................................................. J2250.4345 64 

Ø 5.0 mm, GH 1.5 mm ................................................. J2250.5015 64 

Ø 5.0 mm, GH 3.0 mm ................................................. J2250.5030 64 

Ø 5.0 mm, GH 4.5 mm ................................................. J2250.5045 


64 

Ø 3.3 mm, GH 1.5 mm ................................................. J2249.3315 64 

Ø 3.3 mm, GH 3.0 mm ................................................. J2249.3330 64 

Ø 3.8 mm, GH 1.5 mm ................................................. J2249.3815 64 

Ø 3.8 mm, GH 3.0 mm ................................................. J2249.3830 64 

Ø 3.8 mm, GH 4.5 mm ................................................. J2249.3845 64 

Ø 4.3 mm, GH 1.5 mm ................................................. J2249.4315 64 

Ø 4.3 mm, GH 3.0 mm ................................................. J2249.4330 64 

Ø 4.3 mm, GH 4.5 mm ................................................. J2249.4345 64 

Ø 5.0 mm, GH 1.5 mm ................................................. J2249.5015 64 

Ø 5.0 mm, GH 3.0 mm ................................................. J2249.5030 64 

Ø 5.0 mm, GH 4.5 mm ................................................. J2249.5045 

Bar abutment 

64 

Ø 3.3 mm, GH 0.5 mm ................................................. J2255.3305 60 

Ø 3.3 mm, GH 2.0 mm ................................................. J2255.3320 60 

Ø 3.8 mm, GH 0.5 mm ................................................. J2255.3805 60 

Ø 3.8 mm, GH 2.0 mm ................................................. J2255.3820 60 

Ø 3.8 mm, GH 4.0 mm ................................................. J2255.3840 60 

Ø 4.3 mm, GH 0.5 mm ................................................. J2255.4305 60 

Ø 4.3 mm, GH 2.0 mm ................................................. J2255.4320 60 

Ø 4.3 mm, GH 4.0 mm ................................................. J2255.4340 60 

Ø 5.0 mm, GH 0.5 mm ................................................. J2255.5005 60 

Ø 5.0 mm, GH 2.0 mm ................................................. J2255.5020 60 

Ø 5.0 mm, GH 4.0 mm ................................................. J2255.5040 60 

Ø 6.0 mm, GH 0.5 mm ................................................. J2255.6005 60 

Ø 6.0 mm, GH 2.0 mm ................................................. J2255.6020 60 

Ø 6.0 mm, GH 4.0 mm ................................................. J2255.6040 

Base for bar abutment, burn-out 

60 

Ø 3.3 mm .................................................................... J2257.3300 61 

Ø 3.8 mm .................................................................... J2257.3800 61 

Ø 4.3 mm .................................................................... J2257.4300 61 

Ø 5.0 mm .................................................................... J2257.5000 61 

Ø 6.0 mm .................................................................... J2257.6000 

Base for bar abutment, cast-on 

61 

Ø 3.3 mm .................................................................... J2263.4300 62 

Ø 3.8 mm .................................................................... J2263.4300 62 

Ø 4.3 mm .................................................................... J2263.4300 62 

Ø 5.0 mm .................................................................... J2263.6000 62 

Ø 6.0 mm .................................................................... J2263.6000 

Base for bar abutment, laser-weldable 

62 

Ø 3.3 mm .................................................................... J2262.4300 62 

Ø 3.8 mm .................................................................... J2262.4300 62 

Ø 4.3 mm .................................................................... J2262.4300 62 

Ø 5.0 mm .................................................................... J2262.6000 62 

Ø 6.0 mm .................................................................... J2262.6000 

Base for bar abutment, solderable 

62 

Ø 3.3 mm .................................................................... J2258.4300 62 

Ø 3.8 mm .................................................................... J2258.4300 62 

Ø 4.3 mm .................................................................... J2258.4300 62 

Ø 5.0 mm .................................................................... J2258.6000 62 

Ø 6.0 mm .................................................................... J2258.6000 

Bite registation cap 

62 

Ø 3.3 mm .................................................................... J2112.3300 50 

Ø 3.8 mm .................................................................... J2112.3800 50 

Ø 4.3 mm .................................................................... J2112.4300 50 

Ø 5.0 mm .................................................................... J2112.5000 50 

Ø 6.0 mm .................................................................... J2112.6000 

Bite registration post 

50 

Ø 3.3 mm .................................................................... J2140.3300 50 

Ø 3.8 mm .................................................................... J2140.3800 50 

Ø 4.3 mm .................................................................... J2140.4300 50 

Ø 5.0 mm .................................................................... J2140.5000 50 

Ø 6.0 mm .................................................................... J2140.6000 

C 

50 

CAMLOG ® selection abutment kit ........................... K8011.1000 74 

CAMLOG ® Overdenture model .................................. 290125 78 

CAMLOG ® Crown and Bridge model ........................ 290126 

CAMLOG 

78 

® macro model, 

Scale 3:1 ..................................................................... K8010.1010 

CAMLOG 

78 

® Pick-Up instrument 

holder for carrying implants ........................................... J5300.0030 35 

Cardanic driver (30°) ................................................. J5300.0010 


35 

Ø 3.3 mm ................................................................... K2242.3340 57 

Ø 3.8 mm ................................................................... K2242.3840 57 

Ø 4.3 mm ................................................................... K2242.4340 57 

Ø 5.0 mm ................................................................... K2242.5040 57 

Ø 6.0 mm ................................................................... K2242.6040 

Checkup pin CAMLOG 

57 

® Guide 

Ø 3.8/4.3 mm .............................................................. J5301.0448 29 

Cleaning cannula for drills with internal irrigation ....... J5002.0020 35 

Cleaning needle for drills with internal irrigation ......... J5002.0012 35



(PEEK) for universal holder 

Ø 3.3/3.8/4.3 mm ........................................................ J3712.4300 83 

Ø 5.0/6.0 mm .............................................................. J3712.6000 83 

CT-tube for drill Ø 2.0 mm, 

internal diameter 2.1 mm ............................................. A2002.2000 15 

CT-tube for drill Ø 2.2 mm 

internal diameter 2.3 mm ............................................. A2222.2200 15 

D 

Depth stop for form drills SCREW-LINE, 

with reduced coil 

Ø 3.3 mm .................................................................... J5015.3300 23 

Ø 3.8 mm .................................................................... J5015.3800 23 

Ø 4.3 mm .................................................................... J5015.4300 23 

Ø 5.0 mm .................................................................... J5015.5000 23 

Ø 6.0 mm .................................................................... J5015.6000 23 

Depth stop SCREW-LINE 

for pilot drill (J5033.2003) and pre-drill (J5033.2803) 

L 99 mm ....................................................................... J5015.0009 21 

L 11 mm ....................................................................... J5015.0011 21 

L 13 mm ....................................................................... J5015.0013 21 

Drill extension, ISO shaft 

L 26.6 mm .................................................................... J5002.0005 34 


(for A2002.2000) Ø 2.6 mm ........................................ A2050.2600 15 

(for A2222.2200) Ø 2.8 mm ........................................ A2050.2800 15 

Driver for bar abutment 

Ø 3.3/3.8/4.3 mm, L 18.6 mm ...................................... J5300.0020 37 

Ø 5.0/6.0 mm, L 18.6 mm ............................................ J5300.0025 37 

Driver for CAMLOG ® Guide implants ....................... J5300.0012 29 

Driver for impression post and healing cap for bar abutment 

Ø 3.3/3.8/4.3 mm, L 19.1 mm ...................................... J5300.0027 37 

Ø 5.0/6.0 mm, L 19.1 mm ............................................ J5300.0028 37 

Driver for Locator ® , manual/wrench 

L 24.3 mm .................................................................... 08929-CB 37 

Driver for screw implants 

with ISO shaft for angled handpiece 

L 27.5 mm .................................................................... J5300.0007 34 

Driver 

for ball abutment, manual/wrench 

L 18.3 mm .................................................................... J5300.0011 37 

Driver, long, for screw implants 

manual/wrench 

L 27.0 mm .................................................................... J5300.0009 34 

Driver, short, for screw implants 

manual/wrench 

L 18.0 mm .................................................................... J5300.0008 34 

E 

Esthomic ® abutment PS, 15° angled, type A 

Ø 3.8 mm, GH 1.5-2.5 mm .......................................... K2203.3815 53 

Ø 4.3 mm, GH 1.5-2.5 mm .......................................... K2203.4315 53 

Ø 5.0 mm, GH 1.5-2.5 mm .......................................... K2203.5015 53 

Ø 6.0 mm, GH 1.5-2.5 mm .......................................... K2203.6015 53 

Esthomic ® abutment PS, 15° angled, type B 

Ø 3.8 mm, GH 1.5-2.5 mm .......................................... K2204.3815 53 

Ø 4.3 mm, GH 1.5-2.5 mm .......................................... K2204.4315 53 

Ø 5.0 mm, GH 1.5-2.5 mm .......................................... K2204.5015 53 

Ø 6.0 mm, GH 1.5-2.5 mm .......................................... K2204.6015 53 

Esthomic ® abutment PS, straight 

Ø 3.8 mm, GH 1.5-2.5 mm .......................................... K2202.3815 52 

Ø 4.3 mm, GH 1.5-2.5 mm .......................................... K2202.4315 52 

Ø 5.0 mm, GH 1.5-2.5 mm .......................................... K2202.5015 52 

Ø 6.0 mm, GH 1.5-2.5 mm .......................................... K2202.6015 

Esthomic 

52 

® abutment, 15° angled, type A 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K2227.3810 52 

Ø 3.8 mm, GH 3.0-4.5 mm .......................................... K2227.3830 52 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K2227.4310 52 

Ø 4.3 mm, GH 3.0-4.5 mm .......................................... K2227.4330 52 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K2227.5010 52 

Ø 5.0 mm, GH 3.0-4.5 mm .......................................... K2227.5030 52 

Ø 6.0 mm, GH 1.0-1.8 mm .......................................... K2227.6010 52 

Ø 6.0 mm, GH 3.0-4.5 mm .......................................... K2227.6030 

Esthomic 

52 

® abutment, 15° angled, type B 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K2228.3810 53 

Ø 3.8 mm, GH 3.0-4.5 mm .......................................... K2228.3830 53 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K2228.4310 53 

Ø 4.3 mm, GH 3.0-4.5 mm .......................................... K2228.4330 53 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K2228.5010 53 

Ø 5.0 mm, GH 3.0-4.5 mm .......................................... K2228.5030 53 

Ø 6.0 mm, GH 1.0-1.8 mm .......................................... K2228.6010 53 

Ø 6.0 mm, GH 3.0-4.5 mm .......................................... K2228.6030 

Esthomic 

53 

® abutment, 20° angled, type A 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K2231.3810 54 

Ø 3.8 mm, GH 3.0-4.5 mm .......................................... K2231.3830 54 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K2231.4310 54 

Ø 4.3 mm, GH 3.0-4.5 mm .......................................... K2231.4330 54 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K2231.5010 54 

Ø 5.0 mm, GH 3.0-4.5 mm .......................................... K2231.5030 54 

Ø 6.0 mm, GH 1.0-1.8 mm .......................................... K2231.6010 54 

Ø 6.0 mm, GH 3.0-4.5 mm .......................................... K2231.6030 

Esthomic 

54 

® abutment, 20° angled, type B 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K2232.3810 54 

Ø 3.8 mm, GH 3.0-4.5 mm .......................................... K2232.3830 54 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K2232.4310 54 

Ø 4.3 mm, GH 3.0-4.5 mm .......................................... K2232.4330 54 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K2232.5010 54 

Ø 5.0 mm, GH 3.0-4.5 mm .......................................... K2232.5030 54 

Ø 6.0 mm, GH 1.0-1.8 mm .......................................... K2232.6010 54 

Ø 6.0 mm, GH 3.0-4.5 mm .......................................... K2232.6030 

Esthomic 

54 

® abutment, Inset 

Ø 3.3 mm, GH 1.5-2.8 mm .......................................... K2235.3315 54 

Ø 3.8 mm, GH 1.5-2.8 mm .......................................... K2235.3815 54 

Ø 4.3 mm, GH 1.5-2.8 mm .......................................... K2235.4315 54 

Ø 5.0 mm, GH 1.5-2.8 mm .......................................... K2235.5015 54 

Ø 6.0 mm, GH 1.5-2.8 mm .......................................... K2235.6015 

Esthomic 

54 

® abutment, straight 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K2226.3810 52 

Ø 3.8 mm, GH 3.0-4.5 mm .......................................... K2226.3830 52 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K2226.4310 52 

Ø 4.3 mm, GH 3.0-4.5 mm .......................................... K2226.4330 52 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K2226.5010 52 

Ø 5.0 mm, GH 3.0-4.5 mm .......................................... K2226.5030 52 

Ø 6.0 mm, GH 1.0-1.8 mm .......................................... K2226.6010 52 

Ø 6.0 mm, GH 3.0-4.5 mm .......................................... K2226.6030 

Esthomic 

52 

® selection abutment, straight 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K3526.3810 74 

Ø 3.8 mm, GH 3.0-4.5 mm .......................................... K3526.3830 74 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K3526.4310 74 

Ø 4.3 mm, GH 3.0-4.5 mm .......................................... K3526.4330 74 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K3526.5010 74 

Ø 5.0 mm, GH 3.0-4.5 mm .......................................... K3526.5030 

Esthomic 

74 

® selection abutment, 15° angled, type A 

Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K3527.3810 75 

87

88 


Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K3527.4310 75 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K3527.5010 75 


Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K3528.3810 75 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K3528.4310 75 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K3528.5010 75 


Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K3531.3810 75 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K3531.4310 75 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K3531.5010 75 


Ø 3.8 mm, GH 1.0-1.8 mm .......................................... K3532.3810 75 

Ø 4.3 mm, GH 1.0-1.8 mm .......................................... K3532.4310 75 

Ø 5.0 mm, GH 1.0-1.8 mm .......................................... K3532.5010 75 

F 

Form drill CAMLOG ® Guide, SCREW-LINE, Cortical Bone 

Ø 3.8 mm, L 19 mm ..................................................... J5048.3809 28 

Ø 3.8 mm, L 11 mm ..................................................... J5048.3811 28 

Ø 3.8 mm, L 13 mm ..................................................... J5048.3813 28 

Ø 4.3 mm, L 19 mm ..................................................... J5048.4309 28 

Ø 4.3 mm, L 11 mm ..................................................... J5048.4311 28 

Ø 4.3 mm, L 13 mm ..................................................... J5048.4313 28 

Form drill SCREW-LINE, Cortical bone 

Ø 3.3 mm .................................................................... J5038.3316 23 

Ø 3.8 mm .................................................................... J5038.3816 23 

Ø 4.3 mm .................................................................... J5038.4316 23 

Ø 5.0 mm .................................................................... J5038.5016 23 

Ø 6.0 mm .................................................................... J5038.6016 

Form drill SCREW-LINE, with reduced coil 

23 

Ø 3.3 mm, L 11 mm ..................................................... J5025.3311 22 

Ø 3.3 mm, L 13 mm ..................................................... J5025.3313 22 

Ø 3.3 mm, L 16 mm ..................................................... J5025.3316 22 

Ø 3.8 mm, L 19 mm ..................................................... J5025.3809 22 

Ø 3.8 mm, L 11 mm ..................................................... J5025.3811 22 

Ø 3.8 mm, L 13 mm ..................................................... J5025.3813 22 

Ø 3.8 mm, L 16 mm ..................................................... J5025.3816 22 

Ø 4.3 mm, L 19 mm ..................................................... J5025.4309 22 

Ø 4.3 mm, L 11 mm ..................................................... J5025.4311 22 

Ø 4.3 mm, L 13 mm ..................................................... J5025.4313 22 

Ø 4.3 mm, L 16 mm ..................................................... J5025.4316 22 

Ø 5.0 mm, L 19 mm ..................................................... J5025.5009 22 

Ø 5.0 mm, L 11 mm ..................................................... J5025.5011 22 

Ø 5.0 mm, L 13 mm ..................................................... J5025.5013 22 

Ø 5.0 mm, L 16 mm ..................................................... J5025.5016 22 

Ø 6.0 mm, L 19 mm ..................................................... J5025.6009 22 

Ø 6.0 mm, L 11 mm ..................................................... J5025.6011 22 

Ø 6.0 mm, L 13 mm ..................................................... J5025.6013 22 

Ø 6.0 mm, L 16 mm ..................................................... J5025.6016 

G ® 

Gingiva punch CAMLOG Guide 

22 

Ø 3.8 mm .................................................................... J5041.3800 27 

Ø 4.3 mm .................................................................... J5041.4300 


27 

Ø 3.3 mm ................................................................... K2246.3300 56 

Ø 3.8 mm ................................................................... K2246.3800 56 

Ø 4.3 mm ................................................................... K2246.4300 56 

Ø 5.0 mm ................................................................... K2246.5000 56 

Ø 6.0 mm ................................................................... K2246.6000 56 

Guiding sleeve CAMLOG ® Guide 

Ø 3.8 mm .................................................................... J3714.5500 27 

Ø 4.3 mm .................................................................... J3714.5501 

H 

Healing cap for bar abutment 

27 

Ø 3.3 mm .................................................................... J2030.4300 60 

Ø 3.8 mm .................................................................... J2030.4300 60 

Ø 4.3 mm .................................................................... J2030.4300 60 

Ø 5.0 mm .................................................................... J2030.6000 60 

Ø 6.0 mm .................................................................... J2030.6000 

Healing cap PS, bottleneck 

60 

Ø 3.8 mm, GH 4.0 mm ................................................ K2001.3840 32 

Ø 3.8 mm, GH 6.0 mm ................................................ K2001.3860 


32 

Ø 4.3 mm, GH 4.0 mm ................................................ K2001.4340 32 

Ø 4.3 mm, GH 6.0 mm ................................................ K2001.4360 32 

Ø 5.0 mm, GH 4.0 mm ................................................ K2001.5040 32 

Ø 5.0 mm, GH 6.0 mm ................................................ K2001.5060 32 

Ø 6.0 mm, GH 4.0 mm ................................................ K2001.6040 32 

Ø 6.0 mm, GH 6.0 mm ................................................ K2001.6060 

Healing cap PS, cylindrical 

32 

Ø 3.8 mm, GH 2.0 mm ................................................ K2005.3820 30 

Ø 3.8 mm, GH 4.0 mm ................................................ K2005.3840 30 

Ø 3.8 mm, GH 6.0 mm ................................................ K2005.3860 30 

Ø 4.3 mm, GH 2.0 mm ................................................ K2005.4320 30 

Ø 4.3 mm, GH 4.0 mm ................................................ K2005.4340 30 

Ø 4.3 mm, GH 6.0 mm ................................................ K2005.4360 30 

Ø 5.0 mm, GH 2.0 mm ................................................ K2005.5020 30 

Ø 5.0 mm, GH 4.0 mm ................................................ K2005.5040 30 

Ø 5.0 mm, GH 6.0 mm ................................................ K2005.5060 30 

Ø 6.0 mm, GH 2.0 mm ................................................ K2005.6020 30 

Ø 6.0 mm, GH 4.0 mm ................................................ K2005.6040 30 

Ø 6.0 mm, GH 6.0 mm ................................................ K2005.6060 

Healing cap PS, wide body 

30 

Ø 3.8 mm, GH 4.0 mm ................................................ K2004.3840 31 

Ø 3.8 mm, GH 6.0 mm ................................................ K2004.3860 31 

Ø 4.3 mm, GH 4.0 mm ................................................ K2004.4340 31 

Ø 4.3 mm, GH 6.0 mm ................................................ K2004.4360 31 

Ø 5.0 mm, GH 4.0 mm ................................................ K2004.5040 31 

Ø 5.0 mm, GH 6.0 mm ................................................ K2004.5060 31 

Ø 6.0 mm, GH 4.0 mm ................................................ K2004.6040 31 

Ø 6.0 mm, GH 6.0 mm ................................................ K2004.6060 

Healing cap, bottleneck 

31 

Ø 3.3 mm, GH 4.0 mm ................................................. J2011.3340 32 








Ø 6.0 mm, GH 6.0 mm ................................................. J2011.6060 

Healing cap, cylindrical 

32 

Ø 3.3 mm, GH 2.0 mm ................................................. J2015.3320 30 

Ø 3.3 mm, GH 4.0 mm ................................................. J2015.3340 30 

Ø 3.8 mm, GH 2.0 mm ................................................. J2015.3820 30 

Ø 3.8 mm, GH 4.0 mm ................................................. J2015.3840 30 

Ø 3.8 mm, GH 6.0 mm ................................................. J2015.3860 30 

Ø 4.3 mm, GH 2.0 mm ................................................. J2015.4320 30 

Ø 4.3 mm, GH 4.0 mm ................................................. J2015.4340 30 

Ø 4.3 mm, GH 6.0 mm ................................................. J2015.4360 30 

Ø 5.0 mm, GH 2.0 mm ................................................. J2015.5020 30


Ø 5.0 mm, GH 4.0 mm ................................................. J2015.5040 30 

Ø 5.0 mm, GH 6.0 mm ................................................. J2015.5060 30 

Ø 6.0 mm, GH 2.0 mm ................................................. J2015.6020 30 

Ø 6.0 mm, GH 4.0 mm ................................................. J2015.6040 30 

Ø 6.0 mm, GH 6.0 mm ................................................. J2015.6060 30 

Healing cap, wide body 

Ø 3.3 mm, GH 2.0 mm ................................................. J2014.3320 31 

Ø 3.3 mm, GH 4.0 mm ................................................. J2014.3340 31 

Ø 3.8 mm, GH 2.0 mm ................................................. J2014.3820 31 

Ø 3.8 mm, GH 4.0 mm ................................................. J2014.3840 31 

Ø 3.8 mm, GH 6.0 mm ................................................. J2014.3860 31 

Ø 4.3 mm, GH 2.0 mm ................................................. J2014.4320 31 

Ø 4.3 mm, GH 4.0 mm ................................................. J2014.4340 31 

Ø 4.3 mm, GH 6.0 mm ................................................. J2014.4360 31 

Ø 5.0 mm, GH 2.0 mm ................................................. J2014.5020 31 

Ø 5.0 mm, GH 4.0 mm ................................................. J2014.5040 31 

Ø 5.0 mm, GH 6.0 mm ................................................. J2014.5060 31 

Ø 6.0 mm, GH 2.0 mm ................................................. J2014.6020 31 

Ø 6.0 mm, GH 4.0 mm ................................................. J2014.6040 31 

Ø 6.0 mm, GH 6.0 mm ................................................. J2014.6060 31 

Holding key for insertion post ................................. J5302.0010 

Holding pin for bar, for bar abutment/soldering aid 

for bar abutment, yellow, for thread M 1.6 (4 units) 

35 

Ø 3.3/3.8/4.3 mm ........................................................ J2256.1600 

Holding pin for bar, for bar abutment/soldering aid 

for bar abutment, blue, for thread M 2.0 (4 units)) 

63 

Ø 5.0/6.0 mm .............................................................. J2256.2000 

Holding sleeve for screw implants, color-coded 

63 

Ø 3.3 mm .................................................................... J5302.3300 35 

Ø 3.8 mm .................................................................... J5302.3800 

I 

Impression cap 

35 

Ø 3.3 mm .................................................................... J2111.3300 49 

Ø 3.8 mm .................................................................... J2111.3800 49 

Ø 4.3 mm .................................................................... J2111.4300 49 

Ø 5.0 mm .................................................................... J2111.5000 49 

Ø 6.0 mm .................................................................... J2111.6000 49 

Impression post for bar abutment 

Ø 3.3 mm .................................................................... J2130.4300 60 

Ø 3.8 mm .................................................................... J2130.4300 60 

Ø 4.3 mm .................................................................... J2130.4300 60 

Ø 5.0 mm .................................................................... J2130.6000 60 

Ø 6.0 mm .................................................................... J2130.6000 60 

Impression post PS, closed tray 

Ø 3.8 mm ................................................................... K2109.3800 49 

Ø 4.3 mm ................................................................... K2109.4300 49 

Ø 5.0 mm ................................................................... K2109.5000 49 

Ø 6.0 mm ................................................................... K2109.6000 

Impression post PS, open tray 

49 

Ø 3.8 mm ................................................................... K2119.3800 48 

Ø 4.3 mm ................................................................... K2119.4300 48 

Ø 5.0 mm ................................................................... K2119.5000 48 

Ø 6.0 mm ................................................................... K2119.6000 


48 

Ø 3.3 mm ................................................................... K2110.3300 49 

Ø 3.8 mm ................................................................... K2110.3800 49 

Ø 4.3 mm ................................................................... K2110.4300 49 

Ø 5.0 mm ................................................................... K2110.5000 49 

Ø 6.0 mm ................................................................... K2110.6000 49 


Ø 3.3 mm ................................................................... K2121.3300 48 

Ø 3.8 mm ................................................................... K2121.3800 48 

Ø 4.3 mm ................................................................... K2121.4300 48 

Ø 5.0 mm ................................................................... K2121.5000 48 

Ø 6.0 mm ................................................................... K2121.6000 

Insertion post CAMLOG 

48 

® Guide for lab analogs 

Ø 3.8 mm ................................................................... K2026.3800 28 

Ø 4.3 mm ................................................................... K2026.4300 

L 

Lab analog 

28 

Ø 3.3 mm ................................................................... J3010.3300 50 

Ø 3.8 mm ................................................................... J3010.3800 50 

Ø 4.3 mm ................................................................... J3010.4300 50 

Ø 5.0 mm ................................................................... J3010.5000 50 

Ø 6.0 mm ................................................................... J3010.6000 

Lab screw, hex 

50 

thread M 1.6 .......................................................... J4006.1601 59, 70 

thread M 2.0 .......................................................... J4006.2001 59, 70 

Lamella retention insert, 

for matrix CM Dalbo ® -Plus 

Ø 3.3/3.8/4.3/5.0 mm .................................................. J2250.0007 

Locator 

65 

® abutment for CAMLOG ® implants 

Ø 3.3 mm, GH 1.0 mm .................................................08401-CB 66 

Ø 3.3 mm, GH 2.0 mm .................................................08402-CB 66 

Ø 3.3 mm, GH 3.0 mm .................................................08403-CB 66 

Ø 3.3 mm, GH 4.0 mm .................................................08404-CB 66 

Ø 3.3 mm, GH 5.0 mm .................................................08405-CB 66 

Ø 3.3 mm, GH 6.0 mm .................................................08406-CB 66 

Ø 3.8 mm, GH 1.0 mm .................................................08970-CB 66 

Ø 3.8 mm, GH 2.0 mm .................................................08971-CB 66 

Ø 3.8 mm, GH 3.0 mm .................................................08972-CB 66 

Ø 3.8 mm, GH 4.0 mm .................................................08973-CB 66 

Ø 3.8 mm, GH 5.0 mm .................................................08974-CB 66 

Ø 3.8 mm, GH 6.0 mm .................................................08975-CB 66 

Ø 4.3 mm, GH 1.0 mm .................................................08976-CB 66 

Ø 4.3 mm, GH 2.0 mm .................................................08977-CB 66 

Ø 4.3 mm, GH 3.0 mm .................................................08978-CB 66 

Ø 4.3 mm, GH 4.0 mm .................................................08979-CB 66 

Ø 4.3 mm, GH 5.0 mm .................................................08980-CB 66 

Ø 4.3 mm, GH 6.0 mm .................................................08981-CB 66 

Ø 5.0 mm, GH 1.0 mm .................................................08982-CB 66 

Ø 5.0 mm, GH 2.0 mm .................................................08983-CB 66 

Ø 5.0 mm, GH 3.0 mm .................................................08984-CB 66 

Ø 5.0 mm, GH 4.0 mm .................................................08985-CB 66 

Ø 5.0 mm, GH 5.0 mm .................................................08986-CB 66 

Ø 5.0 mm, GH 6.0 mm .................................................08987-CB 

Locator 

66 

® analog 

Ø 3.3/3.8/4.3 mm ........................................................ 08530-CB 67 

Ø 5.0 mm .................................................................... 08516-CB 67 

Locator ® angle measurement guide ......................... 09530-CB 

Locator 

37 

® impression cap 

Ø 3.3/3.8/4.3/5.0 mm .................................................. 08505-CB 67 

Locator ® instrument, three part, L 83 mm .................. 08393-CB .....37 

Locator ® male processing packages 

Ø 3.3/3.8/4.3/5.0 mm 

2 Pack .................................................................... 08519-02-CB .... 67 

10 Pack .................................................................. 08519-10-CB .... 67 

Locator ® parallel post ............................................... 08517-CB 

Locator 

37 

® replacement male for extended range, green 

Ø 3.8/4.3/5.0 mm ........................................................ 08547-CB 68 

89

90 


Locator ® replacement male for extended range, orange 

Ø 3.8/4.3/5.0 mm ........................................................ 08545-CB 68 

Locator ® replacement male for extended range, red 

Ø 3.8/4.3/5.0 mm ........................................................ 08548-CB 68 

Locator ® replacement male, blue 

Ø 3.3/3.8/4.3/5.0 mm .................................................. 08529-CB 68 

Locator ® replacement male, clear 

Ø 3.3/3.8/4.3/5.0 mm .................................................. 08524-CB 68 

Locator ® replacement male, pink 

Ø 3.3/3.8/4.3/5.0 mm .................................................. 08527-CB 68 


Ø 3.8 mm, GH 0.8 mm ................................................ K2550.3808 58 

Ø 3.8 mm, GH 1.5 mm ................................................ K2550.3815 58 

Ø 4.3 mm, GH 0.8 mm ................................................ K2550.4308 58 

Ø 4.3 mm, GH 1.5 mm ................................................ K2550.4315 58 

Ø 5.0 mm, GH 0.8 mm ................................................ K2550.5008 58 

Ø 5.0 mm, GH 1.5 mm ................................................ K2550.5015 58 

Ø 6.0 mm, GH 0.8 mm ................................................ K2550.6008 58 

Ø 6.0 mm, GH 1.5 mm ................................................ K2550.6015 58 


Ø 3.8/4.3 mm .............................................................. J2552.4300 58 

Ø 5.0/6.0 mm .............................................................. J2552.6000 58 

Logfit ® impression cap 

Ø 3.8/4.3 mm .............................................................. J2551.4300 58 

Ø 5.0/6.0 mm .............................................................. J2551.6000 58 

Logfit ® plastic coping bridge 

Ø 3.8/4.3 mm .............................................................. J2553.4301 59 

Ø 5.0/6.0 mm .............................................................. J2553.6001 59 

Logfit ® plastic coping crown 

Ø 3.8/4.3 mm .............................................................. J2553.4302 59 

Ø 5.0/6.0 mm .............................................................. J2553.6002 59 

M 

Matrix CM Dalbo ® -Plus, for ball abutment 

Ø 3.3/3.8/4.3/5.0 mm .................................................. J2250.0005 65 

O 

Osteotomy set SCREW-LINE, 

straight convex ............................................................. J5418.0020 24 

angled convex ............................................................... J5418.0030 25 

P 

Paralleling pin, 

SCREW-LINE 

Ø 1.7-2.8/2.0 mm ........................................................ J5300.2028 40 

Patient brochure .......................................................................... 89 

Pilot drill SCREW-LINE 

reduced coil 

Ø 2.0 mm .................................................................... J5033.2003 21 

Pilot drill witout coil 

Ø 2.0 mm .................................................................... J5005.2003 21 


Ø 1.7-2.8 .................................................................... J5033.2803 21 

Prosthetic screw, hex 


Ø 3.3/3.8/4.3 mm, thread M 1.6 ................................... J4005.1602 63 

Ø 5.0/6.0 mm, thread M 2.0 ......................................... J4005.2002 63 

Prosthetic set ............................................................ J5330.8600 36 

Prosthetic tray (without content) ............................ J5330.8500 36 

RReamer for dilating the plaster model, 

for universal holder, incl. color-coded guide pin 

Ø 3.3 mm .................................................................... J3706.3300 73 

Ø 3.8 mm .................................................................... J3706.3800 73 

Ø 4.3 mm .................................................................... J3706.4300 73 

Ø 5.0 mm .................................................................... J3706.5000 73 

Ø 6.0 mm .................................................................... J3706.6000 

Reworking reamer, for base for bar abutment 


73 

Ø 3.3/3.8/4.3 mm ........................................................ J3711.0010 73 

Ø 5.0/6.0 mm .............................................................. J3711.0015 

Reworking reamer, for base for bar abutment 


73 

Ø 3.3/3.8/4.3 mm ........................................................ J3711.0020 73 

Ø 5.0/6.0 mm .............................................................. J3711.0025 

Round bur 

73 

Ø 2.3 mm .................................................................... J5005.2303 21 

Ø 3.5 mm .................................................................... J5005.3500 

S 

Scanbody, incl. lab screw 

21 

Ø 3.3 mm .................................................................... K2600.3310 71 

Ø 3.8 mm .................................................................... K2600.3810 71 

Ø 4.3 mm .................................................................... K2600.4310 71 

Ø 5.0/6.0 mm .............................................................. K2600.6010 

Screw, hex, for bar abutment 

71 

Ø 3.3/3.8/4.3 mm, thread M 1.6 ................................... J4005.1610 61 

Ø 5.0/6.0 mm, thread M 2.0 ......................................... J4005.2010 

Screwdriver 

61 

hex, extra short, manual/wrench, L 14.5 mm ................... J5316.0510 36 

hex, long, ISO shaft, L 26.0 mm ..................................... J5316.0503 30 

hex, long, manual/wrench, L 30.3 mm ............................ J5316.0502 30 

hex, short, ISO shaft, L 18.0 mm .................................... J5316.0504 30 

hex, short, manual/wrench, L 22.5 mm ........................... J5316.0501 36 

Activator, for ball abutment matrix CM Dalbo ® -Plus ........ J5315.0005 

SCREW-LINE implant CAMLOG 

37 

® Guide, Promote ® plus 

Ø 3.8 mm, L 19 mm .................................................... K1053.3809 26 

Ø 3.8 mm, L 11 mm .................................................... K1053.3811 26 

Ø 3.8 mm, L 13 mm .................................................... K1053.3813 26 

Ø 4.3 mm, L 19 mm .................................................... K1053.4309 26 

Ø 4.3 mm, L 11 mm .................................................... K1053.4311 26 

Ø 4.3 mm, L 13 mm .................................................... K1053.4313 

SCREW-LINE implant, for practice 

26 

Ø 3.8 mm ................................................................... K1049.3813 88 

Ø 4.3 mm (10 units) ............................................... K1049.4313-01 

SCREW-LINE implant, Promote 

88 

® plus, K-Series 

Ø 3.3 mm, L 11 mm .................................................... K1052.3311 19 

Ø 3.3 mm, L 13 mm .................................................... K1052.3313 19 

Ø 3.3 mm, L 16 mm .................................................... K1052.3316 19 

Ø 3.8 mm, L 19 mm .................................................... K1052.3809 19 

Ø 3.8 mm, L 11 mm .................................................... K1052.3811 19 

Ø 3.8 mm, L 13 mm .................................................... K1052.3813 19 

Ø 3.8 mm, L 16 mm .................................................... K1052.3816 19 

Ø 4.3 mm, L 19 mm .................................................... K1052.4309 19 

Ø 4.3 mm, L 11 mm .................................................... K1052.4311 19


Ø 4.3 mm, L 13 mm .................................................... K1052.4313 19 

Ø 4.3 mm, L 16 mm .................................................... K1052.4316 19 

Ø 5.0 mm, L 19 mm .................................................... K1052.5009 19 

Ø 5.0 mm, L 11 mm .................................................... K1052.5011 19 

Ø 5.0 mm, L 13 mm .................................................... K1052.5013 19 

Ø 5.0 mm, L 16 mm .................................................... K1052.5016 19 

Ø 6.0 mm, L 19 mm .................................................... K1052.6009 19 

Ø 6.0 mm, L 11 mm .................................................... K1052.6011 19 

Ø 6.0 mm, L 13 mm .................................................... K1052.6013 19 

Ø 6.0 mm, L 16 mm .................................................... K1052.6016 19 

SCREW-LINE implant, Promote ® , K-Series 

Ø 3.3 mm, L 11 mm .................................................... K1042.3311 18 

Ø 3.3 mm, L 13 mm .................................................... K1042.3313 18 

Ø 3.3 mm, L 16 mm .................................................... K1042.3316 18 

Ø 3.8 mm, L 19 mm .................................................... K1042.3809 18 

Ø 3.8 mm, L 11 mm .................................................... K1042.3811 18 

Ø 3.8 mm, L 13 mm .................................................... K1042.3813 18 

Ø 3.8 mm, L 16 mm .................................................... K1042.3816 18 

Ø 4.3 mm, L 19 mm .................................................... K1042.4309 18 

Ø 4.3 mm, L 11 mm .................................................... K1042.4311 18 

Ø 4.3 mm, L 13 mm .................................................... K1042.4313 18 

Ø 4.3 mm, L 16 mm .................................................... K1042.4316 18 

Ø 5.0 mm, L 19 mm .................................................... K1042.5009 18 

Ø 5.0 mm, L 11 mm .................................................... K1042.5011 18 

Ø 5.0 mm, L 13 mm .................................................... K1042.5013 18 

Ø 5.0 mm, L 16 mm .................................................... K1042.5016 18 

Ø 6.0 mm, L 19 mm .................................................... K1042.6009 18 

Ø 6.0 mm, L 11 mm .................................................... K1042.6011 18 

Ø 6.0 mm, L 13 mm .................................................... K1042.6013 18 

Ø 6.0 mm, L 16 mm .................................................... K1042.6016 18 

Setting tool CAMLOG ® Guide 

Ø 3.8/4.3 mm .............................................................. J3715.5500 29 

Sinus set..................................................................... T2010.0010 33 

Sleeve for titanium bonding base, burn-out, Passive-Fit 

Ø 3.3 mm .................................................................... J2261.3300 63 

Ø 3.8 mm .................................................................... J2261.3800 63 

Ø 4.3 mm .................................................................... J2261.4300 63 

Ø 5.0 mm .................................................................... J2261.5000 63 

Ø 6.0 mm .................................................................... J2261.6000 

Soldering aid for bar abutment 

63 

Ø 3.3/3.8/4.3 mm ........................................................ J3020.4300 61 

Ø 5.0/6.0 mm .............................................................. J3020.6000 

Surgery set CAMLOG 

61 

® Guide, SCREW-LINE 

Ø 3.8 mm, L 19 mm ..................................................... J5041.0001 26 

Ø 3.8 mm, L 11 mm ..................................................... J5041.0002 26 

Ø 3.8 mm, L 13 mm ..................................................... J5041.0003 26 

Ø 4.3 mm, L 19 mm ..................................................... J5041.0004 27 

Ø 4.3 mm, L 11 mm ..................................................... J5041.0005 27 

Ø 4.3 mm, L 13 mm ..................................................... J5041.0006 27 

Surgery set SCREW-LINE ........................................... J5300.0055 20 

T 

Tap adapter, for tap SCREW-LINE 

long L 23.0 mm ........................................................... J5322.0011 34 

short L 18.0 mm ........................................................... J5322.0010 34 

Tap SCREW-LINE, with hexagon 

Ø 3.3 mm .................................................................... J5039.3309 23 

Ø 3.8 mm .................................................................... J5039.3809 23 

Ø 4.3 mm .................................................................... J5039.4309 23 

Ø 5.0 mm .................................................................... J5039.5009 23 

Ø 6.0 mm .................................................................... J5039.6009 23 


Ø 3.8 mm ................................................................... K2212.3800 69 

Ø 4.3 mm ................................................................... K2212.4300 69 

Ø 5.0 mm ................................................................... K2212.5000 69 

Ø 6.0 mm ................................................................... K2212.6000 

Template drill CAMLOG 

69 

® Guide 

Ø 3.8/4.3 mm .............................................................. J3713.5555 

Temporary abutment PS 

29 

Ø 3.8 mm ................................................................... K2208.3800 51 

Ø 4.3 mm ................................................................... K2208.4300 51 

Ø 5.0 mm ................................................................... K2208.5000 51 

Ø 6.0 mm ................................................................... K2208.6000 


51 

Ø 3.8 mm ................................................................... K2241.3800 51 

Ø 4.3 mm ................................................................... K2241.4300 51 

Ø 5.0 mm ................................................................... K2241.5000 51 

Ø 6.0 mm ................................................................... K2241.6000 


51 

Ø 3.3 mm ................................................................... K2244.3348 56 

Ø 3.8 mm ................................................................... K2244.3848 56 

Ø 4.3 mm ................................................................... K2244.4348 56 

Ø 5.0 mm ................................................................... K2244.5048 56 

Ø 6.0 mm ................................................................... K2244.6048 

Titanium base, for ceramic abutment 

56 

Ø 3.3 mm ................................................................... K2242.3342 57 

Ø 3.8 mm ................................................................... K2242.3842 57 

Ø 4.3 mm ................................................................... K2242.4342 57 

Ø 5.0 mm ................................................................... K2242.5042 57 

Ø 6.0 mm ................................................................... K2242.6042 

Titanium bonding base for bar abutment, Passive-Fit 

57 

Ø 3.3 mm .................................................................... J2260.3300 63 

Ø 3.8 mm .................................................................... J2260.3800 63 

Ø 4.3 mm .................................................................... J2260.4300 63 

Ø 5.0 mm .................................................................... J2260.5000 63 

Ø 6.0 mm .................................................................... J2260.6000 63 

Torque wrench ........................................................... J5320.1030 

U 

Universal abutment PS 

36 

Ø 3.8 mm ............................................................. K2201.3800 55, 69 

Ø 4.3 mm ............................................................. K2201.4300 55, 69 

Ø 5.0 mm ............................................................. K2201.5000 55, 69 

Ø 6.0 mm ............................................................. K2201.6000 


55, 69 

Ø 3.3 mm ............................................................. K2211.3300 55, 69 

Ø 3.8 mm ............................................................. K2211.3800 55, 69 

Ø 4.3 mm ............................................................. K2211.4300 55, 69 

Ø 5.0 mm ............................................................. K2211.5000 55, 69 

Ø 6.0 mm ............................................................. K2211.6000 

Universal holder, incl. 2 lab screws, hex, 

and abutment collects for 

55, 69 

Ø 3.3/3.8/4.3/5.0/6.0 mm ............................................ J3709.0010 82 

Universal holder ........................................................ J3709.0015 82 

91

92 


V 

Video CD Einzelzahn Regio 12/Single tooth lateral incisor, 

Deutsch/English (14 min) ............................................... J8005.0001 79 

Video CD Zahnloser Oberkiefer/Edentulous Maxilla, 

Deutsch/English (13 min.) .............................................. J8005.0002 79 

X 

X-Ray Planning foil 1:1.25 

SCREW-LINE implants .................................................... K5300.9010 14 

X-Ray Planning foil 1:1.4 

SCREW-LINE implants ................................................... K5300.9011 14 

X-Ray Transfer pictures 1:1.25 SCREW-LINE implants 

planning slide, self-adhesive 

Ø 3.3 mm ................................................................... K5300.9080 14 

Ø 3.8 mm ................................................................... K5300.9081 14 

Ø 4.3 mm ................................................................... K5300.9082 14 

Ø 5.0 mm ................................................................... K5300.9083 14 

Ø 6.0 mm ................................................................... K5300.9084 14 

Z 

Zirconium oxide sleeve, for ceramic abutment 

Ø 3.3 mm .................................................................... J2242.3341 57 

Ø 3.8 mm .................................................................... J2242.3841 57 

Ø 4.3 mm .................................................................... J2242.4341 57 

Ø 5.0 mm .................................................................... J2242.5041 57 

Ø 6.0 mm .................................................................... J2242.6041 57

Article Numbers 

Article No. Article Page Article No. Article Page 

08393-CB Locator® instrument three part 83 mm ................ 37 

Locator abutment for CAMLOG implants 

08401-CB Ø 3.3 mm, GH 1.0 mm ................................................ 66 

08402-CB Ø 3.3 mm, GH 2.0 mm ................................................ 66 

08403-CB Ø 3.3 mm, GH 3.0 mm ................................................ 66 

08404-CB Ø 3.3 mm, GH 4.0 mm ................................................ 66 

08405-CB Ø 3.3 mm, GH 5.0 mm ................................................ 66 

08406-CB Ø 3.3 mm, GH 6.0 mm ................................................ 66 

08505-CB Locator® impression cap (4 units) ........................... 67 

Locator® analog (4 units) 

08516-CB Ø 4.3 mm, Ø 5.0 mm .................................................. 67 

08516-CB Ø 5.0 mm, Ø 5.0 mm .................................................. 67 

08517-CB Locator® parallel post (4 units) .............................. 37 

Locator® male processing package 

08519-02-CB (2 units) ...................................................................... 67 

08519-10-CB (10 units) .................................................................... 67 

08524-CB Locator® replacement male (clear) ......................... 67 

08527-CB Locator® replacement male (pink) .......................... 68 

08529-CB Locator® replacement male (blue) .......................... 68 

Locator® analog (4 units) 

08530-CB Ø 3.3 mm, Ø 3.8 mm , Ø 4.3 mm ................................. 67 

08516-CB Ø 5.0 mm ................................................................... 67 

08547-CB Locator® replacement male 

for extended range (green) ...................................... 68 

08548-CB Locator® replacement male 

for extended range (red) .......................................... 68 

Driver for Locator®, manual/ratchet 

08929-CB L 24.3 mm .................................................................. 37 

Locator abutment for CAMLOG implants 

08970-CB Ø 3.8 mm, GH 1.0 mm ................................................ 66 

08971-CB Ø 3.8 mm, GH 2.0 mm ................................................ 66 

08972-CB Ø 3.8 mm, GH 3.0 mm ................................................ 66 

08973-CB Ø 3.8 mm, GH 4.0 mm ................................................ 66 

08974-CB Ø 3.8 mm, GH 5.0 mm ................................................ 66 

08975-CB Ø 3.8 mm, GH 6.0 mm ................................................ 66 

08976-CB Ø 4.3 mm, GH 1.0 mm ................................................ 66 

08977-CB Ø 4.3 mm, GH 2.0 mm ................................................ 66 

08978-CB Ø 4.3 mm, GH 3.0 mm ................................................ 66 

08979-CB Ø 4.3 mm, GH 4.0 mm ................................................ 66 

08980-CB Ø 4.3 mm, GH 5.0 mm ................................................ 66 

08981-CB Ø 4.3 mm, GH 6.0 mm ................................................ 66 

08982-CB Ø 5.0 mm, GH 1.0 mm ................................................ 66 

08983-CB Ø 5.0 mm, GH 2.0 mm ................................................ 66 

08984-CB Ø 5.0 mm, GH 3.0 mm ................................................ 66 

08985-CB Ø 5.0 mm, GH 4.0 mm ................................................ 66 

08986-CB Ø 5.0 mm, GH 5.0 mm ................................................ 66 

08987-CB Ø 5.0 mm, GH 6.0 mm ................................................ 66 

09530-CB Locator® angle measurement guide ...................... 37 

290125 Overdenture model.................................................. 78 

290126 Crown and Bridge model ........................................ 78 

CT-tube for drill Ø 2.0 mm, 

A2002.2000 internal diameter 2.1 mm ............................................ 15 


A2050.2600 Ø 2.6 mm .................................................................. 15 

A2050.2800 Ø 2.8 mm .................................................................. 15 

CT-tube for drill Ø 2.2 mm 

A2222.2200 internal diameter 2.3 mm ............................................ 15 

Healing cap, bottleneck 

J2011.3340 Ø 3.3 mm, GH 4.0 mm ........................................... 32 









Healing cap, wide body 

J2014.3320 Ø 3.3 mm, GH 2.0 mm ........................................... 31 

J2014.3340 Ø 3.3 mm, GH 4.0 mm ........................................... 31 

J2014.3820 Ø 3.8 mm, GH 2.0 mm ........................................... 31 

J2014.3840 Ø 3.8 mm, GH 4.0 mm ........................................... 31 

J2014.3860 Ø 3.8 mm, GH 6.0 mm ........................................... 31 

J2014.4320 Ø 4.3 mm, GH 2.0 mm ........................................... 31 

J2014.4340 Ø 4.3 mm, GH 4.0 mm ........................................... 31 

J2014.4360 Ø 4.3 mm, GH 6.0 mm ........................................... 31 

J2014.5020 Ø 5.0 mm, GH 2.0 mm ........................................... 31 

J2014.5040 Ø 5.0 mm, GH 4.0 mm ........................................... 31 

J2014.5060 Ø 5.0 mm, GH 6.0 mm ........................................... 31 

J2014.6020 Ø 6.0 mm, GH 2.0 mm ........................................... 31 

J2014.6040 Ø 6.0 mm, GH 4.0 mm ........................................... 31 

J2014.6060 Ø 6.0 mm, GH 6.0 mm ........................................... 31 

Healing cap, cylindrical 

J2015.3320 Ø 3.3 mm, GH 2.0 mm ........................................... 30 

J2015.3340 Ø 3.3 mm, GH 4.0 mm ........................................... 30 

J2015.3820 Ø 3.8 mm, GH 2.0 mm ........................................... 30 

J2015.3840 Ø 3.8 mm, GH 4.0 mm ........................................... 30 

J2015.3860 Ø 3.8 mm, GH 6.0 mm ........................................... 30 

J2015.4320 Ø 4.3 mm, GH 2.0 mm ........................................... 30 

J2015.4340 Ø 4.3 mm, GH 4.0 mm ........................................... 30 

J2015.4360 Ø 4.3 mm, GH 6.0 mm ........................................... 30 

J2015.5020 Ø 5.0 mm, GH 2.0 mm ........................................... 30 

J2015.5040 Ø 5.0 mm, GH 4.0 mm ........................................... 30 

J2015.5060 Ø 5.0 mm, GH 6.0 mm ........................................... 30 

J2015.6020 Ø 6.0 mm, GH 2.0 mm ........................................... 30 

J2015.6040 Ø 6.0 mm, GH 4.0 mm ........................................... 30 

J2015.6060 Ø 6.0 mm, GH 6.0 mm ........................................... 30 

Healing cap for bar abutment 

J2030.4300 Ø 3.3 mm .............................................................. 60 

J2030.4300 Ø 3.8 mm .............................................................. 60 

J2030.4300 Ø 4.3 mm .............................................................. 60 

J2030.6000 Ø 5.0 mm .............................................................. 60 

J2030.6000 Ø 6.0 mm .............................................................. 60 

Impression cap 

J2111.3300 Ø 3.3 mm .............................................................. 49 

J2111.3800 Ø 3.8 mm .............................................................. 49 

J2111.4300 Ø 4.3 mm .............................................................. 49 

J2111.5000 Ø 5.0 mm .............................................................. 49 

J2111.6000 Ø 6.0 mm .............................................................. 49 

Bite registation cap 

J2112.3300 Ø 3.3 mm .............................................................. 50 

J2112.3800 Ø 3.8 mm .............................................................. 50 

J2112.4300 Ø 4.3 mm .............................................................. 50 

J2112.5000 Ø 5.0 mm .............................................................. 50 

J2112.6000 Ø 6.0 mm .............................................................. 50 

Impression post for bar abutment 

J2130.4300 Ø 3.3 mm .............................................................. 60 

93

94 


J2130.4300 Ø 3.8 mm .............................................................. 60 

J2130.4300 Ø 4.3 mm .............................................................. 60 

J2130.6000 Ø 5.0 mm .............................................................. 60 

J2130.6000 Ø 6.0 mm .............................................................. 60 

Bite registration post 

J2140.3300 Ø 3.3 mm .............................................................. 50 

J2140.3800 Ø 3.8 mm .............................................................. 50 

J2140.4300 Ø 4.3 mm .............................................................. 50 

J2140.5000 Ø 5.0 mm .............................................................. 50 

J2140.6000 Ø 6.0 mm .............................................................. 50 

Zirconium oxide sleeve, for ceramic abutment 

J2242.3341 Ø 3.3 mm .............................................................. 57 

J2242.3841 Ø 3.8 mm .............................................................. 57 

J2242.4341 Ø 4.3 mm .............................................................. 57 

J2242.5041 Ø 5.0 mm .............................................................. 57 

J2242.6041 Ø 6.0 mm .............................................................. 57 


J2249.3315 Ø 3.3 mm, GH 1.5 mm ........................................... 64 

J2249.3330 Ø 3.3 mm, GH 3.0 mm ........................................... 64 

J2249.3815 Ø 3.8 mm, GH 1.5 mm ........................................... 64 

J2249.3830 Ø 3.8 mm, GH 3.0 mm ........................................... 64 

J2249.3845 Ø 3.8 mm, GH 4.5 mm ........................................... 64 

J2249.4315 Ø 4.3 mm, GH 1.5 mm ........................................... 64 

J2249.4330 Ø 4.3 mm, GH 3.0 mm ........................................... 64 

J2249.4345 Ø 4.3 mm, GH 4.5 mm ........................................... 64 

J2249.5015 Ø 5.0 mm, GH 1.5 mm ........................................... 64 

J2249.5030 Ø 5.0 mm, GH 3.0 mm ........................................... 64 

J2249.5045 Ø 5.0 mm, GH 4.5 mm ........................................... 64 

Matrix CM Dalbo ® -Plus, for ball abutment 

J2250.0005 Ø 3.3/3.8/4.3/5.0 mm ............................................ 65 

Lamella retention insert, 

for matrix CM Dalbo ® -Plus 

J2250.0007 Ø 3.3/3.8/4.3/5.0 mm ............................................ 65 


incl. male part and matrix CM Dalbo ® -Plus 

J2250.3315 Ø 3.3 mm, GH 1.5 mm ........................................... 64 

J2250.3330 Ø 3.3 mm, GH 3.0 mm ........................................... 64 

J2250.3815 Ø 3.8 mm, GH 1.5 mm ........................................... 64 

J2250.3830 Ø 3.8 mm, GH 3.0 mm ........................................... 64 

J2250.3845 Ø 3.8 mm, GH 4.5 mm ........................................... 64 

J2250.4315 Ø 4.3 mm, GH 1.5 mm ........................................... 64 

J2250.4330 Ø 4.3 mm, GH 3.0 mm ........................................... 64 

J2250.4345 Ø 4.3 mm, GH 4.5 mm ........................................... 64 

J2250.5015 Ø 5.0 mm, GH 1.5 mm ........................................... 64 

J2250.5030 Ø 5.0 mm, GH 3.0 mm ........................................... 64 

J2250.5045 Ø 5.0 mm, GH 4.5 mm ........................................... 64 

Bar abutment 

J2255.3305 Ø 3.3 mm, GH 0.5 mm ........................................... 60 

J2255.3320 Ø 3.3 mm, GH 2.0 mm ........................................... 60 

J2255.3805 Ø 3.8 mm, GH 0.5 mm ........................................... 60 

J2255.3820 Ø 3.8 mm, GH 2.0 mm ........................................... 60 

J2255.3840 Ø 3.8 mm, GH 4.0 mm ........................................... 60 

J2255.4305 Ø 4.3 mm, GH 0.5 mm ........................................... 60 

J2255.4320 Ø 4.3 mm, GH 2.0 mm ........................................... 60 

J2255.4340 Ø 4.3 mm, GH 4.0 mm ........................................... 60 

J2255.5005 Ø 5.0 mm, GH 0.5 mm ........................................... 60 

J2255.5020 Ø 5.0 mm, GH 2.0 mm ........................................... 60 

J2255.5040 Ø 5.0 mm, GH 4.0 mm ........................................... 60 

J2255.6005 Ø 6.0 mm, GH 0.5 mm ........................................... 60 

J2255.6020 Ø 6.0 mm, GH 2.0 mm ........................................... 60 

J2255.6040 Ø 6.0 mm, GH 4.0 mm ........................................... 60 

Holding pin for bar, for bar abutment/soldering 

aid for bar abutment, yellow, for thread M 1.6 

(4 units) 

J2256.1600 Ø 3.3/3.8/4.3 mm .................................................. 63 

Holding pin for bar, for bar abutment/soldering 

aid for bar abutment, blue, for thread M 2.0 

(4 units) 

J2256.2000 Ø 5.0/6.0 mm ........................................................ 

Base for bar abutment, burn-out 

63 

J2257.3300 Ø 3.3 mm .............................................................. 61 

J2257.3800 Ø 3.8 mm .............................................................. 61 

J2257.4300 Ø 4.3 mm .............................................................. 61 

J2257.5000 Ø 5.0 mm .............................................................. 61 

J2257.6000 Ø 6.0 mm .............................................................. 

Base for bar abutment, solderable 

61 

J2258.4300 Ø 3.3 mm .............................................................. 62 

J2258.4300 Ø 3.8 mm .............................................................. 62 

J2258.4300 Ø 4.3 mm .............................................................. 62 

J2258.6000 Ø 5.0 mm .............................................................. 62 

J2258.6000 Ø 6.0 mm .............................................................. 

Titanium bonding base for bar abutment, 

Passive-Fit 

62 

J2260.3300 Ø 3.3 mm .............................................................. 63 

J2260.3800 Ø 3.8 mm .............................................................. 63 

J2260.4300 Ø 4.3 mm .............................................................. 63 

J2260.5000 Ø 5.0 mm .............................................................. 63 

J2260.6000 Ø 6.0 mm .............................................................. 

Sleeve for titanium bonding base, burn-out 

63 

J2261.3300 Ø 3.3 mm .............................................................. 63 

J2261.3800 Ø 3.8 mm .............................................................. 63 

J2261.4300 Ø 4.3 mm .............................................................. 63 

J2261.5000 Ø 5.0 mm .............................................................. 63 

J2261.6000 Ø 6.0 mm .............................................................. 

Base for bar abutment, laser-weldable 

63 

J2262.4300 Ø 3.3 mm .............................................................. 62 

J2262.4300 Ø 3.8 mm .............................................................. 62 

J2262.4300 Ø 4.3 mm .............................................................. 62 

J2262.6000 Ø 5.0 mm .............................................................. 62 

J2262.6000 Ø 6.0 mm .............................................................. 

Base for bar abutment, cast-on 

62 

J2263.4300 Ø 3.3 mm .............................................................. 62 

J2263.4300 Ø 3.8 mm .............................................................. 62 

J2263.4300 Ø 4.3 mm .............................................................. 62 

J2263.6000 Ø 5.0 mm .............................................................. 62 

J2263.6000 Ø 6.0 mm .............................................................. 

Logfit 

62 

® impression cap 

J2551.4300 Ø 3.8/4.3 mm ........................................................ 58 

J2551.6000 Ø 5.0/6.0 mm ........................................................ 58 


J2552.4300 Ø 3.8/4.3 mm ........................................................ 58 

J2552.6000 Ø 5.0/6.0 mm ........................................................ 

Logfit 

58 

® plastic coping, bridge 

J2553.4301 Ø 3.8/4.3 mm ........................................................ 59 

J2553.6001 Ø 5.0/6.0 mm ........................................................ 

Logfit 

59 

® plastic coping, crown 

J2553.4302 Ø 3.8/4.3 mm ........................................................ 59 

J2553.6002 Ø 5.0/6.0 mm ........................................................ 

Lab analog 

59 

J3010.3300 Ø 3.3 mm .............................................................. 50 

J3010.3800 Ø 3.8 mm .............................................................. 50 

J3010.4300 Ø 4.3 mm .............................................................. 50 

J3010.5000 Ø 5.0 mm .............................................................. 50 

J3010.6000 Ø 6.0 mm .............................................................. 


50 

J3015.3300 Ø 3.3 mm .............................................................. 65 

J3015.3800 Ø 3.8 mm .............................................................. 65


J3015.4300 Ø 4.3 mm .............................................................. 65 

J3015.5000 Ø 5.0 mm .............................................................. 65 

Soldering aid for bar abutment, for bar abutment 

J3020.4300 Ø 3.3/3.8/4.3 mm .................................................. 61 

J3020.6000 Ø 5.0/6.0 mm ........................................................ 61 

Reamer for dilating the plaster model, 

incl. color-coded guide pin 

J3706.3300 Ø 3.3 mm .............................................................. 73 

J3706.3800 Ø 3.8 mm .............................................................. 73 

J3706.4300 Ø 4.3 mm .............................................................. 73 

J3706.5000 Ø 5.0 mm .............................................................. 73 

J3706.6000 Ø 6.0 mm .............................................................. 73 

Universal holder incl. abutment collets 

J3709.0010 Ø 3.3/3.8/4.3/5.0/6.0 mm ....................................... 71 

J3709.0015 Universal holder .................................................. 71 

Abutment collets, for universal holder 

J3709.3300 Ø 3.3 mm .............................................................. 72 

J3709.3800 Ø 3.8 mm .............................................................. 72 

J3709.4300 Ø 4.3 mm .............................................................. 72 

J3709.5000 Ø 5.0 mm .............................................................. 72 

J3709.6000 Ø 6.0 mm .............................................................. 72 

Reworking reamer, for base for bar abutment, 


J3711.0010 Ø 3.3/3.8/4.3 mm .................................................. 73 

J3711.0015 Ø 5.0/6.0 mm ........................................................ 73 

Reworking reamer, for base for bar abutment, 


J3711.0020 Ø 3.3/3.8/4.3 mm .................................................. 73 

J3711.0025 Ø 5.0/6.0 mm ........................................................ 73 


(PEEK) for universal holder 

J3712.4300 Ø 3.3/3.8/4.3 mm .................................................. 72 

J3712.6000 Ø 5.0/6.0 mm ........................................................ 72 

Template drill CAMLOG ® Guide 

J3713.5555 Ø 3.8/4.3 mm ........................................................ 29 

Guiding sleeve CAMLOG ® Guide 

J3714.5500 Ø 3.8 mm .............................................................. 27 

J3714.5501 Ø 4.3 mm .............................................................. 27 

Setting tool CAMLOG ® Guide 

J3715.5500 Ø 3.8/4.3 mm ........................................................ 29 


J4005.1601 Ø 3.3/3.8/4.3 mm, thread M 1.6 ...................... 59, 70 

Prosthetic screw, for bar abutment, hex 

J4005.1602 Ø 3.3/3.8/4.3 mm, thread M 1.6 ............................. 63 

Screw (stainless steel), hex, for bar abutment, 

impression taking open tray and soldering aid 

J4005.1610 Ø 3.3/3.8/4.3 mm, thread M 1.6 ............................. 61 


J4005.2001 Ø 5.0/6.0 mm, thread M 2.0 ............................ 59, 70 

Prosthetic screw for bar abutment, hex 

J4005.2002 Ø 5.0/6.0 mm, thread M 2.0 ................................... 63 

Screw, (stainless steel), hex, for bar abutment, 

impression taking open tray and soldering aid 

J4005.2010 Ø 5.0/6.0 mm, thread M 2.0 ................................... 61 

Lab screw, hex 

J4006.1601 Ø 3.3/3.8/4.3 mm, thread M 1.6 ...................... 59, 70 

J4006.2001 Ø 5.0/6.0 mm, thread M 2.0 ............................ 59, 70 

Drill extension, ISO shaft 

J5002.0005 L 26.6 mm .............................................................. 34 

J5002.0010 Adapter, ISO shaft for angled hand piece/wrench..... 35 

J5002.0012 Cleaning needle for drills with internal irrigation ... 35 

J5002.0020 Cleaning cannula for drills with internal irrigation .. 35 

Pilot drill without coil 

J5005.2003 Ø 2.0 mm .............................................................. 21 

Round bur 

J5005.2303 Ø 2.3 mm .............................................................. 21 

J5005.3500 Ø 3.5 mm .............................................................. 21 

Depth stop SCREW-LINE for pilot drill 

(J5033.2003) and pre-drill (J5033.2803) 

J5015.0009 L 99 mm ................................................................. 21 

J5015.0011 L 11 mm ................................................................. 21 

J5015.0013 L 13 mm ................................................................. 21 

Depth stop for form drills SCREW-LINE, 


J5015.3300 Ø 3.3 mm .............................................................. 23 

J5015.3800 Ø 3.8 mm .............................................................. 23 

J5015.4300 Ø 4.3 mm .............................................................. 23 

J5015.5000 Ø 5.0 mm .............................................................. 23 

J5015.6000 Ø 6.0 mm .............................................................. 23 



J5025.3311 Ø 3.3 mm, L 11 mm ............................................... 22 

J5025.3313 Ø 3.3 mm, L 13 mm ............................................... 22 

J5025.3316 Ø 3.3 mm, L 16 mm ............................................... 22 

J5025.3809 Ø 3.8 mm, L 19 mm ............................................... 22 

J5025.3811 Ø 3.8 mm, L 11 mm ............................................... 22 

J5025.3813 Ø 3.8 mm, L 13 mm ............................................... 22 

J5025.3816 Ø 3.8 mm, L 16 mm ............................................... 22 

J5025.4309 Ø 4.3 mm, L 19 mm ............................................... 22 

J5025.4311 Ø 4.3 mm, L 11 mm ............................................... 22 

J5025.4313 Ø 4.3 mm, L 13 mm ............................................... 22 

J5025.4316 Ø 4.3 mm, L 16 mm ............................................... 22 

J5025.5009 Ø 5.0 mm, L 19 mm ............................................... 22 

J5025.5011 Ø 5.0 mm, L 11 mm ............................................... 22 

J5025.5013 Ø 5.0 mm, L 13 mm ............................................... 22 

J5025.5016 Ø 5.0 mm, L 16 mm ............................................... 22 

J5025.6009 Ø 6.0 mm, L 19 mm ............................................... 22 

J5025.6011 Ø 6.0 mm, L 11 mm ............................................... 22 

J5025.6013 Ø 6.0 mm, L 13 mm ............................................... 22 

J5025.6016 Ø 6.0 mm, L 16 mm ............................................... 22 

Pilot drill SCREW-LINE, 

reduced coil 

J5033.2003 Ø 2.0 mm .............................................................. 21 


J5033.2803 Ø 1.7-2.8 mm ........................................................ 21 


Cortical bone 

J5038.3316 Ø 3.3 mm .............................................................. 23 

J5038.3816 Ø 3.8 mm .............................................................. 23 

J5038.4316 Ø 4.3 mm .............................................................. 23 

J5038.5016 Ø 5.0 mm .............................................................. 23 

J5038.6016 Ø 6.0 mm .............................................................. 23 

Tap SCREW-LINE, with hexagon 

J5039.3309 Ø 3.3 mm .............................................................. 23 

J5039.3809 Ø 3.8 mm .............................................................. 23 

J5039.4309 Ø 4.3 mm .............................................................. 23 

J5039.5009 Ø 5.0 mm .............................................................. 23 

J5039.6009 Ø 6.0 mm .............................................................. 23 

Surgery set CAMLOG ® Guide, SCREW-LINE 

J5041.0001 Ø 3.8 mm, L 19 mm ............................................... 26 

J5041.0002 Ø 3.8 mm, L 11 mm ............................................... 26 

J5041.0003 Ø 3.8 mm, L 13 mm ............................................... 26 

J5041.0004 Ø 4.3 mm, L 19 mm ............................................... 27 

J5041.0005 Ø 4.3 mm, L 11 mm ............................................... 27 

J5041.0006 Ø 4.3 mm, L 13 mm ............................................... 27 

95

96 


Gingiva punch CAMLOG ® Guide 

J5041.3800 Ø 3.8 mm .............................................................. 27 

J5041.4300 Ø 4.3 mm .............................................................. 27 

Form drill CAMLOG ® Guide, SCREW-LINE, 

Cortical Bone 

J5048.3809 Ø 3.8 mm, L 19 mm ............................................... 28 

J5048.3811 Ø 3.8 mm, L 11 mm ............................................... 28 

J5048.3813 Ø 3.8 mm, L 13 mm ............................................... 28 

J5048.4309 Ø 4.3 mm, L 19 mm ............................................... 28 

J5048.4311 Ø 4.3 mm, L 11 mm ............................................... 28 

J5048.4313 Ø 4.3 mm, L 13 mm ............................................... 28 

Driver for screw implants, 

with ISO shaft for angled hand piece 

J5300.0007 L 27.5 mm .............................................................. 34 

Driver, short, for screw implants, 

manual/wrench 

J5300.0008 L 18.0 mm .............................................................. 34 

Driver, long, for screw implants, 

manual/wrench 

J5300.0009 L 27.0 mm .............................................................. 34 

J5300.0010 Cardanic driver (30°) ............................................ 35 

Driver 

for ball abutment, manual/wrench 

J5300.0011 L 18.3 mm .............................................................. 37 

Driver for CAMLOG ® Guide implants 

J5300.0012 Ø 3.8/4.3 mm ........................................................ 29 


J5300.0020 Ø 3.3/3.8/4.3 mm, L 18.6 mm ................................. 37 


J5300.0025 Ø 5.0/6.0 mm, L 18.6 mm ...................................... 37 

Driver for impression post and 

healing cap for bar abutment 

J5300.0027 Ø 3.3/3.8/4.3 mm, L 19.1 mm ................................. 37 

J5300.0028 Ø 5.0/6.0 mm, L 19.1 mm ...................................... 37 

CAMLOG ® Pick-Up instrument 

J5300.0030 holder for carrying implants ..................................... 35 

J5300.0055 Surgery set SCREW-LINE...................................... 20 

Paralleling pin SCREW-LINE 

J5300.2028 Ø 1.7-2.8/2.0 mm .................................................. 34 

Checkup pin CAMLOG ® Guide 

J5301.0448 Ø 3.8/4.3 mm ........................................................ 29 

J5302.0010 Holding key for insertion post ........................... 35 

Holding sleeve for screw implants, 

color coded 

J5302.3300 Ø 3.3 mm .............................................................. 35 

J5302.3800 Ø 3.8 mm .............................................................. 35 

Screwdriver Activator, 

J5315.0005 for ball abutment matrix CM Dalbo ® -Plus ................. 37 

Screwdriver, hex 

J5316.0501 short, manual/wrench, L 22.5 mm ............................ 36 

J5316.0502 long, manual/wrench, L 30.3 mm ............................. 36 

J5316.0503 long, ISO shaft, L 26.0 mm ...................................... 36 

J5316.0504 short, ISO shaft, L 18.0 mm ..................................... 36 

J5316.0510 extra short, manual/wrench, L 14.5 mm .................... 36 

J5320.1030 Torque wrench, with continuous torque 

adjustment until maximal 30 Ncm ............................ 36 

Tap adapter, short for tap SCREW-LINE 

J5322.0010 L 18.0 mm .............................................................. 34 

Tap adapter, long for tap SCREW-LINE 

J5322.0011 L 23.0 mm .............................................................. 34 

J5330.8500 Prosthetic tray (without content) ........................... 36 

J5330.8600 Prosthetic set ....................................................... 36 

Osteotomy set SCREW-LINE, 

J5418.0020 straight convex ........................................................ 24 

J5418.0030 angled convex ......................................................... 25 

Video-CD 

Einzelzahn Regio 12/Single tooth lateral incisor 

J8005.0001 Deutsch/English (14 min.) ........................................ 79 

Video-CD 

Zahnloser Oberkiefer/Edentulous Maxilla 

J8005.0002 Deutsch/English (13 min.) ........................................ 79 

SCREW-LINE implant, Promote ® , K-Series 

K1042.3311 Ø 3.3 mm, L 11 mm ............................................... 18 

K1042.3313 Ø 3.3 mm, L 13 mm ............................................... 18 

K1042.3316 Ø 3.3 mm, L 16 mm ............................................... 18 

K1042.3809 Ø 3.8 mm, L 19 mm ............................................... 18 

K1042.3811 Ø 3.8 mm, L 11 mm ............................................... 18 

K1042.3813 Ø 3.8 mm, L 13 mm ............................................... 18 

K1042.3816 Ø 3.8 mm, L 16 mm ............................................... 18 

K1042.4309 Ø 4.3 mm, L 19 mm ............................................... 18 

K1042.4311 Ø 4.3 mm, L 11 mm ............................................... 18 

K1042.4313 Ø 4.3 mm, L 13 mm ............................................... 18 

K1042.4316 Ø 4.3 mm, L 16 mm ............................................... 18 

K1042.5009 Ø 5.0 mm, L 19 mm ............................................... 18 

K1042.5011 Ø 5.0 mm, L 11 mm ............................................... 18 

K1042.5013 Ø 5.0 mm, L 13 mm ............................................... 18 

K1042.5016 Ø 5.0 mm, L 16 mm ............................................... 18 

K1042.6009 Ø 6.0 mm, L 19 mm ............................................... 18 

K1042.6011 Ø 6.0 mm, L 11 mm ............................................... 18 

K1042.6013 Ø 6.0 mm, L 13 mm ............................................... 18 

K1042.6016 Ø 6.0 mm, L 16 mm ............................................... 18 

SCREW-LINE implant, for practice 

K1049.3813 Ø 3.8 mm .......................................................... 78 

K1049.4313-01 Ø 4.3 mm (10 units) ........................................... 78 

SCREW-LINE implant, Promote ® plus, K-Series 

K1052.3311 Ø 3.3 mm, L 11 mm ............................................... 19 

K1052.3313 Ø 3.3 mm, L 13 mm ............................................... 19 

K1052.3316 Ø 3.3 mm, L 16 mm ............................................... 19 

K1052.3809 Ø 3.8 mm, L 19 mm ............................................... 19 

K1052.3811 Ø 3.8 mm, L 11 mm ............................................... 19 

K1052.3813 Ø 3.8 mm, L 13 mm ............................................... 19 

K1052.3816 Ø 3.8 mm, L 16 mm ............................................... 19 

K1052.4309 Ø 4.3 mm, L 19 mm ............................................... 19 

K1052.4311 Ø 4.3 mm, L 11 mm ............................................... 19 

K1052.4313 Ø 4.3 mm, L 13 mm ............................................... 19 

K1052.4316 Ø 4.3 mm, L 16 mm ............................................... 19 

K1052.5009 Ø 5.0 mm, L 19 mm ............................................... 19 

K1052.5011 Ø 5.0 mm, L 11 mm ............................................... 19 

K1052.5013 Ø 5.0 mm, L 13 mm ............................................... 19 

K1052.5016 Ø 5.0 mm, L 16 mm ............................................... 19 

K1052.6009 Ø 6.0 mm, L 19 mm ............................................... 19 

K1052.6011 Ø 6.0 mm, L 11 mm ............................................... 19 

K1052.6013 Ø 6.0 mm, L 13 mm ............................................... 19 

K1052.6016 Ø 6.0 mm, L 16 mm ............................................... 19 

SCREW-LINE implant CAMLOG ® Guide, 

Promote ® plus 

K1053.3809 Ø 3.8 mm, L 19 mm ............................................... 26 

K1053.3811 Ø 3.8 mm, L 11 mm ............................................... 26 

K1053.3813 Ø 3.8 mm, L 13 mm ............................................... 26


K1053.4309 Ø 4.3 mm, L 19 mm ............................................... 26 

K1053.4311 Ø 4.3 mm, L 11 mm ............................................... 26 

K1053.4313 Ø 4.3 mm, L 13 mm ............................................... 26 


K2001.3840 Ø 3.8 mm, GH 4.0 mm ........................................... 32 

K2001.3860 Ø 3.8 mm, GH 6.0 mm ........................................... 32 

K2001.4340 Ø 4.3 mm, GH 4.0 mm ........................................... 32 

K2001.4360 Ø 4.3 mm, GH 6.0 mm ........................................... 32 

K2001.5040 Ø 5.0 mm, GH 4.0 mm ........................................... 32 

K2001.5060 Ø 5.0 mm, GH 6.0 mm ........................................... 32 

K2001.6040 Ø 6.0 mm, GH 4.0 mm ........................................... 32 

K2001.6060 Ø 6.0 mm, GH 6.0 mm ........................................... 32 

Healing cap PS, wide body 

K2004.3840 Ø 3.8 mm, GH 4.0 mm ........................................... 31 

K2004.3860 Ø 3.8 mm, GH 6.0 mm ........................................... 31 

K2004.4340 Ø 4.3 mm, GH 4.0 mm ........................................... 31 

K2004.4360 Ø 4.3 mm, GH 6.0 mm ........................................... 31 

K2004.5040 Ø 5.0 mm, GH 4.0 mm ........................................... 31 

K2004.5060 Ø 5.0 mm, GH 6.0 mm ........................................... 31 

K2004.6040 Ø 6.0 mm, GH 4.0 mm ........................................... 31 

K2004.6060 Ø 6.0 mm, GH 6.0 mm ........................................... 31 

Healing cap PS, cylindrical 

K2005.3820 Ø 3.8 mm, GH 2.0 mm ........................................... 30 

K2005.3840 Ø 3.8 mm, GH 4.0 mm ........................................... 30 

K2005.3860 Ø 3.8 mm, GH 6.0 mm ........................................... 30 

K2005.4320 Ø 4.3 mm, GH 2.0 mm ........................................... 30 

K2005.4340 Ø 4.3 mm, GH 4.0 mm ........................................... 30 

K2005.4360 Ø 4.3 mm, GH 6.0 mm ........................................... 30 

K2005.5020 Ø 5.0 mm, GH 2.0 mm ........................................... 30 

K2005.5040 Ø 5.0 mm, GH 4.0 mm ........................................... 30 

K2005.5060 Ø 5.0 mm, GH 6.0 mm ........................................... 30 

K2005.6020 Ø 6.0 mm, GH 2.0 mm ........................................... 30 

K2005.6040 Ø 6.0 mm, GH 4.0 mm ........................................... 30 

K2005.6060 Ø 6.0 mm, GH 6.0 mm ........................................... 30 


for lab analogs 

K2026.3800 Ø 3.8 mm .............................................................. 28 

K2026.4300 Ø 4.3 mm .............................................................. 28 

Impression post PS, closed tray 

K2109.3800 Ø 3.8 mm .............................................................. 49 

K2109.4300 Ø 4.3 mm .............................................................. 49 

K2109.5000 Ø 5.0 mm .............................................................. 49 

K2109.6000 Ø 6.0 mm .............................................................. 49 


K2110.3300 Ø 3.3 mm .............................................................. 49 

K2110.3800 Ø 3.8 mm .............................................................. 49 

K2110.4300 Ø 4.3 mm .............................................................. 49 

K2110.5000 Ø 5.0 mm .............................................................. 49 

K2110.6000 Ø 6.0 mm .............................................................. 49 

Impression post PS, open tray 

K2119.3800 Ø 3.8 mm .............................................................. 48 

K2119.4300 Ø 4.3 mm .............................................................. 48 

K2119.5000 Ø 5.0 mm .............................................................. 48 

K2119.6000 Ø 6.0 mm .............................................................. 48 


K2121.3300 Ø 3.3 mm .............................................................. 48 

K2121.3800 Ø 3.8 mm .............................................................. 48 

K2121.4300 Ø 4.3 mm .............................................................. 48 

K2121.5000 Ø 5.0 mm .............................................................. 48 

K2121.6000 Ø 6.0 mm .............................................................. 48 

Universal abutment PS 

K2201.3800 Ø 3.8 mm ....................................................... 55, 69 

K2201.4300 Ø 4.3 mm ....................................................... 55, 69 

K2201.5000 Ø 5.0 mm ....................................................... 55, 69 

K2201.6000 Ø 6.0 mm ....................................................... 55, 69 

Esthomic ® abutment PS, straight 

K2202.3815 Ø 3.8 mm, GH 1.5-2.5 mm ..................................... 52 

K2202.4315 Ø 4.3 mm, GH 1.5-2.5 mm ..................................... 52 

K2202.5015 Ø 5.0 mm, GH 1.5-2.5 mm ..................................... 52 

K2202.6015 Ø 6.0 mm, GH 1.5-2.5 mm ..................................... 52 

Esthomic ® abutment PS, 15° angled, type A 

K2203.3815 Ø 3.8 mm, GH 1.5-2.5 mm ..................................... 53 

K2203.4315 Ø 4.3 mm, GH 1.5-2.5 mm ..................................... 53 

K2203.5015 Ø 5.0 mm, GH 1.5-2.5 mm ..................................... 53 

K2203.6015 Ø 6.0 mm, GH 1.5-2.5 mm ..................................... 53 

Esthomic ® abutment PS, 15° angled, type B 

K2204.3815 Ø 3.8 mm, GH 1.5-2.5 mm ..................................... 53 

K2204.4315 Ø 4.3 mm, GH 1.5-2.5 mm ..................................... 53 

K2204.5015 Ø 5.0 mm, GH 1.5-2.5 mm ..................................... 53 

K2204.6015 Ø 6.0 mm, GH 1.5-2.5 mm ..................................... 53 

Temporary abutment PS 

K2208.3800 Ø 3.8 mm .............................................................. 51 

K2208.4300 Ø 4.3 mm .............................................................. 51 

K2208.5000 Ø 5.0 mm .............................................................. 51 

K2208.6000 Ø 6.0 mm .............................................................. 51 


K2211.3300 Ø 3.3 mm ....................................................... 55, 69 

K2211.3800 Ø 3.8 mm ....................................................... 55, 69 

K2211.4300 Ø 4.3 mm ....................................................... 55, 69 

K2211.5000 Ø 5.0 mm ....................................................... 55, 69 

K2211.6000 Ø 6.0 mm ....................................................... 55, 69 


K2212.3800 Ø 3.8 mm .............................................................. 69 

K2212.4300 Ø 4.3 mm .............................................................. 69 

K2212.5000 Ø 5.0 mm .............................................................. 69 

K2212.6000 Ø 6.0 mm .............................................................. 69 

Esthomic ® abutment, straight 

K2226.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 52 

K2226.3830 Ø 3.8 mm, GH 3.0-4.5 mm ..................................... 52 

K2226.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 52 

K2226.4330 Ø 4.3 mm, GH 3.0-4.5 mm ..................................... 52 

K2226.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 52 

K2226.5030 Ø 5.0 mm, GH 3.0-4.5 mm ..................................... 52 

K2226.6010 Ø 6.0 mm, GH 1.0-1.8 mm ..................................... 52 

K2226.6030 Ø 6.0 mm, GH 3.0-4.5 mm ..................................... 52 

Esthomic ® abutment, 15° angled, type A 

K2227.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 52 

K2227.3830 Ø 3.8 mm, GH 3.0-4.5 mm ..................................... 52 

K2227.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 52 

K2227.4330 Ø 4.3 mm, GH 3.0-4.5 mm ..................................... 52 

K2227.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 52 

K2227.5030 Ø 5.0 mm, GH 3.0-4.5 mm ..................................... 52 

K2227.6010 Ø 6.0 mm, GH 1.0-1.8 mm ..................................... 52 

K2227.6030 Ø 6.0 mm, GH 3.0-4.5 mm ..................................... 52 

Esthomic ® abutment, 15° angled, type B 

K2228.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 53 

K2228.3830 Ø 3.8 mm, GH 3.0-4.5 mm ..................................... 53 

K2228.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 53 

K2228.4330 Ø 4.3 mm, GH 3.0-4.5 mm ..................................... 53 

K2228.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 53 

97

98 


K2228.5030 Ø 5.0 mm, GH 3.0-4.5 mm ..................................... 53 

K2228.6010 Ø 6.0 mm, GH 1.0-1.8 mm ..................................... 53 

K2228.6030 Ø 6.0 mm, GH 3.0-4.5 mm ..................................... 53 

Esthomic ® abutment, 20° angled, type A 

K2231.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 54 

K2231.3830 Ø 3.8 mm, GH 3.0-4.5 mm ..................................... 54 

K2231.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 54 

K2231.4330 Ø 4.3 mm, GH 3.0-4.5 mm ..................................... 54 

K2231.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 54 

K2231.5030 Ø 5.0 mm, GH 3.0-4.5 mm ..................................... 54 

K2231.6010 Ø 6.0 mm, GH 1.0-1.8 mm ..................................... 54 

K2231.6030 Ø 6.0 mm, GH 3.0-4.5 mm ..................................... 54 

Esthomic ® abutment, 20° angled, type B 

K2232.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 54 

K2232.3830 Ø 3.8 mm, GH 3.0-4.5 mm ..................................... 54 

K2232.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 54 

K2232.4330 Ø 4.3 mm, GH 3.0-4.5 mm ..................................... 54 

K2232.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 54 

K2232.5030 Ø 5.0 mm, GH 3.0-4.5 mm ..................................... 54 

K2232.6010 Ø 6.0 mm, GH 1.0-1.8 mm ..................................... 54 

K2232.6030 Ø 6.0 mm, GH 3.0-4.5 mm ..................................... 54 

Esthomic ® abutment, Inset 

K2235.3315 Ø 3.3 mm, GH 1.5-2.8 mm ..................................... 54 

K2235.3815 Ø 3.8 mm, GH 1.5-2.8 mm ..................................... 54 

K2235.4315 Ø 4.3 mm, GH 1.5-2.8 mm ..................................... 54 

K2235.5015 Ø 5.0 mm, GH 1.5-2.8 mm ..................................... 54 

K2235.6015 Ø 6.0 mm, GH 1.5-2.8 mm ..................................... 54 


K2241.3800 Ø 3.8 mm .............................................................. 51 

K2241.4300 Ø 4.3 mm .............................................................. 51 

K2241.5000 Ø 5.0 mm .............................................................. 51 

K2241.6000 Ø 6.0 mm .............................................................. 51 


K2242.3340 Ø 3.3 mm .............................................................. 57 

K2242.3840 Ø 3.8 mm .............................................................. 57 

K2242.4340 Ø 4.3 mm .............................................................. 57 

K2242.5040 Ø 5.0 mm .............................................................. 57 

K2242.6040 Ø 6.0 mm .............................................................. 57 

Titanium base, for ceramic abutment 

K2242.3342 Ø 3.3 mm .............................................................. 57 

K2242.3842 Ø 3.8 mm .............................................................. 57 

K2242.4342 Ø 4.3 mm .............................................................. 57 

K2242.5042 Ø 5.0 mm .............................................................. 57 

K2242.6042 Ø 6.0 mm .............................................................. 57 


K2244.3348 Ø 3.3 mm .............................................................. 56 

K2244.3848 Ø 3.8 mm .............................................................. 56 

K2244.4348 Ø 4.3 mm .............................................................. 56 

K2244.5048 Ø 5.0 mm .............................................................. 56 

K2244.6048 Ø 6.0 mm .............................................................. 56 


K2246.3300 Ø 3.3 mm .............................................................. 56 

K2246.3800 Ø 3.8 mm .............................................................. 56 

K2246.4300 Ø 4.3 mm .............................................................. 56 

K2246.5000 Ø 5.0 mm .............................................................. 56 

K2246.6000 Ø 6.0 mm .............................................................. 56 


K2550.3808 Ø 3.8 mm, GH 0.8 mm ........................................... 58 

K2550.3815 Ø 3.8 mm, GH 1.5 mm ........................................... 58 

K2550.4308 Ø 4.3 mm, GH 0.8 mm ........................................... 58 

K2550.4315 Ø 4.3 mm, GH 1.5 mm ........................................... 58 

K2550.5008 Ø 5.0 mm, GH 0.8 mm ........................................... 58 

K2550.5015 Ø 5.0 mm, GH 1.5 mm ........................................... 58 

K2550.6008 Ø 6.0 mm, GH 0.8 mm ........................................... 58 

K2550.6015 Ø 6.0 mm, GH 1.5 mm ........................................... 58 

Scanbody, incl. lab screw 

K2600.3310 Ø 3.3 mm .............................................................. 71 

K2600.3810 Ø 3.8 mm .............................................................. 71 

K2600.4310 Ø 4.3 mm .............................................................. 71 

K2600.6010 Ø 5.0/6.0 mm ........................................................ 71 


K3526.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 74 

K3526.3830 Ø 3.8 mm, GH 3.0-4.5 mm ..................................... 74 

K3526.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 74 

K3526.4330 Ø 4.3 mm, GH 3.0-4.5 mm ..................................... 74 

K3526.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 74 

K3526.5030 Ø 5.0 mm, GH 3.0-4.5 mm ..................................... 74 


15° angles, type A 

K3527.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 75 

K3527.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 75 

K3527.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 75 


15° angled, type B 

K3528.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 75 

K3528.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 75 

K3528.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 75 


20° angled, type A 

K3531.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 75 

K3531.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 75 

K3531.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 75 


20° angled, type B 

K3532.3810 Ø 3.8 mm, GH 1.0-1.8 mm ..................................... 75 

K3532.4310 Ø 4.3 mm, GH 1.0-1.8 mm ..................................... 75 

K3532.5010 Ø 5.0 mm, GH 1.0-1.8 mm ..................................... 75 

K5300.9010 X-Ray Planning foil 1:1.25 

SCREW-LINE implants .......................................... 14 

K5300.9011 X-Ray Planning foil 1:1.4 

SCREW-LINE implants .......................................... 14 

X-Ray Transfer pictures 1:1.25 


K5300.9080 Ø 3.3 mm .............................................................. 14 

K5300.9081 Ø 3.8 mm .............................................................. 14 

K5300.9082 Ø 4.3 mm .............................................................. 14 

K5300.9083 Ø 5.0 mm .............................................................. 14 

K5300.9084 Ø 6.0 mm .............................................................. 14 

Adapter for screw implants, long, for SCREW-LINE 

implants 

K5302.3310 Ø 3.3 mm .............................................................. 35 

K5302.3810 Ø 3.8 mm .............................................................. 35 

CAMLOG ® macro model, 

K8010.1010 Scale 3:1 ................................................................ 78 

K8011.1000 CAMLOG ® selection abutment kit ...................... 74 

T2010.0010 Sinus set ............................................................... 33

11CM3767 

CAMLOG USA 

1822 Aston Avenue, Carlsbad, CA 92008 

Phone 1-877-537-8862 • Fax 1-877-418-2365 

camlog@henryschein.com • www.camlogimplants.com 

INTERNATIONAL HEADQUARTERS 

CAMLOG Biotechnologies AG I Margarethenstrasse 38 I CH - 4053 Basel 

info@camlog.com I www.camlog.com 

Manufacturer CAMLOG ® products: ALTATEC GmbH, Maybachstrasse 5, D-71299 Wimsheim 

© 2011 Henry Schein, Inc. No copying without permission. Not responsible for typographical errors.

CAMLOG® Implant System Product Catalog 2011

Create successful ePaper yourself

Delete template?

Save as template?