High-Speed Cable Modem Module - Hitron Technologies
High-Speed Cable Modem Module - Hitron Technologies
High-Speed Cable Modem Module - Hitron Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>High</strong>-<strong>Speed</strong> <strong>Cable</strong> <strong>Modem</strong> <strong>Module</strong><br />
EMBEDDED DOCSIS 2.0 INDUSTRIAL CABLE MODEM MODULE<br />
Enable HFC Connectivity Across Your Network<br />
CDA-20360<br />
DOCSIS/EURODOCSIS 3.0<br />
8x4 CHANNEL BONDING<br />
RUGGED DESIGN<br />
The CDA-20360 includes a cable RF interface for the WAN side. On the LAN side<br />
there's a 10/100/1000 Mbps Ethernet pin header and an external Ethernet RJ45 port.<br />
It features RF loop-through and GPIO for control, and status LEDs. Fully-enclosed in a<br />
metal case, its RF shielding enables it to be embedded even in RF-noisy systems. Its<br />
exceptionally rugged design makes it ideal for use in all manner of industrial<br />
applications, including extremely high- and low-temperature environments.<br />
The module is intended for utilization in set-top boxes, VoD home boxes, cable<br />
network analysers, last mile AP and WLAN tranceiver applications. It enables<br />
high-speed data transmission through coaxial cable, with downstream speeds of up to<br />
320 Mbps. The CDA-20360 allows you to offer your end-customers advanced<br />
broadband applications such as telecommuting, small office/home office IP<br />
connectivity, high-speed residential Internet access, interactive multimedia services,<br />
and much more.<br />
Enabling simple, rapid DOCSIS integration for your products, the CDA-20360 lets<br />
manufacturers take advantage of valuable time-to-market benefits, and provides<br />
operators with the high level of conformance testing they have come to expect from<br />
DOCSIS products.<br />
Key Features<br />
DOCSIS/EuroDOCSIS 1.0/1.1/2.0/3.0<br />
DHCP client, TOD client, TFTP client, log client (to log server via CMTS)<br />
Channel bonding: 8 downstream, 4 upstream<br />
Priority handling in upstream SID queues<br />
Transparent bridging - enable up to 64 CPE units.<br />
SNMP agent for device management<br />
Secured remote software upgrade<br />
Fault management: error recovery and control<br />
DSX: Dynamic service flow operations
PRODUCT SPECIFICATIONS<br />
DOCSIS/EuroDOCSIS 1.0/1.1/2.0/3.0<br />
SNMP v1, v2C, v3<br />
WAN interface: F-type female 75Ω RF connector<br />
Tuner: MXL261<br />
Diplexer:<br />
EuroDOCSIS: LPF: 5 ~ 85 MHz,<br />
HPF: 108 ~ 1002 MHz<br />
DOCSIS: LPF: 5 ~42 MHz, HPF: 88 ~ 1002 MHz<br />
LAN interfaces:<br />
10/100/1000 Mbps Ethernet pin header<br />
(Auto-MDI/MDIX)<br />
RJ-45 10/100/1000 Mbps Ethernet port<br />
(Auto-MDI/MDIX)<br />
Demodulation: 64/256QAM<br />
Maximum speed: 320 Mbps with 8 DS channel bonding<br />
Frequency range: 108 ~ 860 MHz (EuroDOCSIS)<br />
Bandwidth: 8 MHz (EuroDOCSIS)<br />
Signal level: -13 ~ 17 dBmV (EuroDOCSIS)<br />
Input return loss: >6dB EuroDOCSIS (108 ~ 860 MHz)<br />
Modulation:<br />
TDMA: QPSK, 8QAM, 16QAM, 32QAM, 64QAM<br />
S-CDMA: QPSK, 8QAM, 16QAM, 32QAM, 64QAM,<br />
128QAM<br />
Maximum speed: 120 Mbps with 4 US channel bonding<br />
Frequency range: 5 ~ 65 MHz (EuroDOCSIS)<br />
Bandwidth:<br />
TDMA: 200, 400, 800, 1600, 3200 and 6400 kHz<br />
S-CDMA: 1600, 3200 and 6400 kHz<br />
Signal level:<br />
TDMA: +8 ~ +54 dBmv (32QAM, 64QAM)<br />
+8 ~ +55 dBmv (8QAM, 16QAM)<br />
+8 ~ +58 dBmv (QPSK)<br />
S-CDMA: +8 ~ +53 dBmv (all modulations)<br />
CM output level can be automatically controlled<br />
by CMTS through power ranging (1dB steps)<br />
Output return loss: >6dB EuroDOCSIS (5 ~ 65 MHz)<br />
Headquarters<br />
No. 1-8, Lihsin 1st Rd., Hsinchu Science Park,<br />
Hsinchu, Taiwan<br />
Tel: +886-3-5786658 Fax: +886-3-5778856<br />
www.hitron.com.tw<br />
Maximum number of CPEs: 64 (64 MAC addresses)<br />
Filtering:<br />
LLC: 16<br />
IP: 32<br />
Frequency cache: 4 entries<br />
Channel plan: 1MHz (EuroDOCSIS)<br />
Number of SIDs: 16<br />
Input power: DC 5.0V or 3.3V single power input by<br />
separate pin or board-to-board connector<br />
Power consumption: 6.5 W typical, 9.57W maximum<br />
MIBs: MIB II, MCNS MIB, <strong>Hitron</strong> proprietary MIB<br />
Operating temperature: -40°C (-40°F) ~ 85°C (185°F)<br />
Operating humidity: 10% ~ 90% (non-condensing)<br />
Storage temperature: -40°C (-40°F) ~ 80°C (176°F)<br />
Surge protection: RF input sustains at least 4kV,<br />
Ethernet RJ-45 sustains at least 2kV<br />
GPIO for LEDs: DS, US, STATUS, LINK<br />
Dimensions: 70mm (W) x 25mm (H)<br />
x 132mm (D)<br />
Weight: 180g ± 5g<br />
P/N: CDA-20360_2011 Date of issue: March 2011<br />
Specifications subject to change without further notice<br />
Trademarks owned by <strong>Hitron</strong> <strong>Technologies</strong> Inc.<br />
2010 © <strong>Hitron</strong> <strong>Technologies</strong> Inc. – All rights reserved.<br />
<strong>Hitron</strong> Europe GmbH<br />
Techno Park Aargau, 5210 Windisch, Switzerland<br />
Tel: +41 56 560 2889 Fax: +41 56 560 2885<br />
info@hitron-europe.com<br />
www.hitron-europe.com