Metal Surface Finishing & Plating Brochure - Pacific Coast Chemicals

Pacific Coast Chemicals
PREFORMED TUMBLING AND VIBRATORY CERAMIC ABRASIVES
COMPOSITIONS:
14
P-60: Light cut, superior finish, leaves a clean surface, good for aluminum parts.
78-81 lbs./ft3. Meets aircraft specs for no aluminum oxide abrasive
P-40: Good cut and wear life, excellent finish, economical, ideal for general purpose use.
85-90 lbs./ft 3
P-20: Fast cut, short time cycle, for medium and heavy burrs, semi matte finish.
85-90 lbs./ft 3
COMPARISON CHART:
FORTUNE TUMBLEX W/A CAPCO W/P BULL
P-60 AX-44 L C-40 HSD F ---
P-40 AX-90 J C-80 VH C LL
P-20 AX-65 G --- SF/FC XC FC
SHAPE SIZE
ANGLE CUT
TRIANGLE (ACT)
CYLINDRICAL
WEDGE (CW)
TRIANGLE (TRI)
STOCK SHAPE SIZE
STOCK
P-20 P-40 P-60
P-20 P-40 P-60
2 x 11/16 ● ● ANGLE CUT
1-7/8 x 5/8 ● ●
1-5/8 x 5/8 ● TRISTAR (AC3S) 1-3/8 x 7/16 ● ●
1-3/8 x 7/16 ● ● 1-1/8 x 7/8 ●
1-1/8 x 7/8 ● ● 1-1/8 x 3/8 ● ●
1-1/8 x 3/8 ● ● ● 1-1/8 x 5/16 ●
7/8 x 7/8 ● ● 7/8 x 7/8 ●
7/8 x 3/8 ● 7/8 x 5/16 ● ● ●
7/8 x 5/16 ● ● 5/8 x 3/4 ●
3/4 x 3/4 ● 5/8 x 5/16 ● ●
5/8 x 5/8 ● ● ●
5/8 x 1/4 ● ●
5/8 x 1/2 x 5/16 ● ●
5/8 x 1/4 ● ● ANGLE CUT
7/8 x 1-1/2 ● ●
3/8 x 1/4 ● CYLINDER (ACC) 5/8 x 1-1/2 ●
3/8 x 3/16 ● ● ● 5/8 x 1-1/8 ● ● ●
1/4 x 5/16 ● 1/2 x 1-3/8 ●
1/2 x 1-1/8 ● ● ●
1-1/2 x 1-1/2 ● ● 7/16 x 7/8 ● ● ●
1 x 1 ● ● ● 3/8 x 1-1/8 ● ●
5/8 x 5/8 ● ● ● 3/8 x 5/8 ● ● ●
7/16 x 7/16 ● ● ● 1/4 x 5/8 ● ●
3/8 x 3/8 ● 3/16 x 5/8 ●
7/8 x 1/4 ●
1/4 x 3/16 ●
3/16 x 3/8 ● ●
5/32 x 5/16 ● ● ●