North American Light Rail Properties
North American Light Rail Properties
North American Light Rail Properties
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
East Penn HO Power Clinic.<br />
Adapting RTR trolleys to East Penn Modules<br />
Bachmann Peter Witt.<br />
Adjustments for tight radius.<br />
Use a Dremel motor tool with a #197 or 198<br />
cutting bit. Get this bit down on the lower flat<br />
curved surface and cut into the front and back<br />
edge. Be sure to not mar the curved surfaces<br />
of the floor. You can see that this bit can only<br />
remove a small amount to metal – no more is<br />
necessary. When you are done with the<br />
Dremel there will probable be some flash from<br />
the work you did. Do a thorough job of<br />
removing all flash and be sure to get all filings<br />
off the model.
Change language