SIMATIC S7-300 - For System Solutions with Emphasis on ...

Standards
The <strong>SIMATIC</strong> <strong>S7</strong>-<strong>300</strong> fulfills the
following national and international standards:
· DIN, EN, IEC
· UL certificate
· cULus
· FM class 1 div. 2; groups A, B, C and D
· Temperature group T4 (≤ 135 °C)
· Marine approvals from:
· American Bureau of Shipping
· Bureau Veritas
· Des Norske Veritas
· Germanischer Lloyd
· Lloyds Register of Shipping
· Ambient temperature 0 to 60 °C for all components
· Earthquake-proof
· EU regulation 94/9/EC (ATEX 100a)
You can find more detailed information
in the <strong>SIMATIC</strong> Guide documentation:
You can order further documents on
the topic of <strong>SIMATIC</strong> at:
To get in touch <strong>with</strong> your contact person
near you, look in the Internet under:
With the A&D Mall you can order
electronically using the Internet:
Siemens AG
Automation and Drives
Postfach 4848, D-90327 Nürnberg
Federal Republic of Germany
www.siemens.com/simatic-docu
www.siemens.com/simatic/printmaterial
www.siemens.com/automation/partner
www.siemens.com/automation/mall
www.siemens.com/simatic-s7-<strong>300</strong>
Order No. 6ZB5310-0HW02-0BB0
Printed in the Federal Republic of Germany
26100/401464 KB 0404 5. WE De
The fail-safe CPUs additionally
comply <strong>with</strong> the following standards:
· IEC 61508 (SIL 3)
· EN 954 (Cat. 4)
· NFPA 79, NFPA 85
© Siemens AG 2004
Subject to change <strong>with</strong>out prior notice
All product designations may be trademarks or product
names of Siemens AG or supplier companies whose use
by third parties for their own purposes could violate the
rights of the owners.
obligation to provide the respective characteristics
shall only exist if expressly agreed in the
terms of contract. Availability and technical
specifications are subject to change <strong>with</strong>out
notice.
The information provided in this brochure contains
descriptions or characterisitcs of performance
which in case of actual use do not always
apply as described or which may change as a result
of further development of the products. An