Sliding door Systems - BD Online Product Search

More documents

Recommendations

Info

Rollan, Perlan, Levolan, Aerolan, Geolan Sliding door systems ! Roller-guided and design fi ttings GEZE SLIDING DOOR SYSTEMS DRIVE The drive element drives the sliding elements via a toothed belt and carrier. The unit is controlled using the operating switches. The drive unit is mounted in such a way as to prevent direct exposure to the weather. There is no risk of injuries, as the motor applies a maximum force of 150 N and the systems are operated with a dead-man's circuit. CONTROL/OPERATING SWITCHES The operating switches can be used to open and close the sliding elements. A test run performed following start-up ensures precise movements. During slow travel, the control memorises the start and stopping point. The end positions are saved and the path of travel is defi ned for future use. TOOTHED BELT The toothed belt provides the connection between the sliding element and the drive via a defl ection pulley. The belt is cut to the required length and connected with the help of a toothed belt lock. OPTIONS/ADDITIONAL CONTROLS If necessary, a maximum of two additional devices such as sensors or smoke detectors can be connected (not included in the GEZE scope of delivery). PERLAN AUT STANDARD MOUNTING ON GLASS LEAVES Mounting of the GEZE Perlan 140 with AUT set on a single-leaf sliding door with glass leaf and glass clamping plate, see Fig. 34-1 The fi xings can be mounted onto the ceiling directly or with a plate or onto the wall with an angle bracket, see Fig. 34-2. INSTALLATION DRAWING Drawing No. 10421-ep14 NOTE: The motor must be mounted in such a way that it is protected from the rain. The Perlan AUT control must be mounted within the building. 34 For more information go to www.barbourproductsearch.info GEZE PERLAN AUT – SYSTEM COMPONENTS AND MOUNTING VARIATIONS GEZE DOOR TECHNOLOGY AND GLASS SYSTEMS Defl ection pulley Drive Toothed belt Perlan AUT set scope of delivery, ID. No. 120434 2 30 End cap (optional) Fig. 34-1 Fig. 34-2 y Tubular buff er 18 37 55 ø55 119 ±4 ø5.2 45 68 68 n * t Wall fi xing bracket Button with dead-man control Direct ceiling mounting 29 ±4 40 59 ±4 SH = GH - 106 7 GH 7.5 35 50 7.5 GH L 1.5 30 160 1.5 6 14 40 59 ±4 29 ±4 SH = GH - 126 7 7 Double roller carriage 28 23 FB 119 ±4 20 Wall mounting with angle bracket 50 n * t Glass adapter ø6 119 ±4 25 1.5 Carrier with belt lock 62 50 30 5.2 40 25 160 Ceiling mounting with plate 29 ±4 Glass thickness 8 / 10 / 12 y 13 40 59 ±4 SH = GH - 119 7 GH 1.5 30 15 Control/ button 130 Drive Perlan AUT 10 45 8 Glass clamping plate FH / 2
SYSTEM FOR PERLAN 140 AUT SLIDING SHUTTERS – MOUNTING VARIATIONS Fig. 35-1 1 Fig. 35-2 Short version Single leaf example y 140 130 25 41 8 45 ø 9 175 Recommendation = 240 Leaf width Recommendation = 10 PERLAN 140 AUT WALL ATTACHMENT OUTDOORS Wall bracket and cover � Short version, single leaf example t=8,5 34 45 5 max. 80 5 45 ca. 100 � Medium-length version, double-leaf example are shown in Fig. 35-1 View without cover, see Fig. 35-2 View with cover, see Fig. 35-3 INSTALLATION DRAWING Drawing No. 10421-ep29 For more information go to www.barbourproductsearch.info 90 30 40 70 141 8 41 ø 9 6,5 max. 60 8 max. 60 6,5 Wall attachment profi le length 175 175 Running pipe length 175 175 Wall attachment spacing n * 175 175 Fig. 35-3 36,5 Roller-guided and design fi ttings GEZE SLIDING DOOR SYSTEMS 45 141 t=8,5 34 45 Recommendation = 240 30 40 70 141 175 Attachment bracket spacing Medium-length version Double-leaf example n * 175 n * 175 Sliding fi tting systems ca. 40 35 1 Sliding door systems Rollan, Perlan, Levolan, Aerolan, Geolan
Page 1 and 2: For more information go to www.barb
Page 3 and 4: For more information go to www.barb
Page 5 and 6: Roller-guided and design fi ttings
Page 7 and 8: Perlan AUT fundamental safety aspec
Page 9 and 10: GEZE ROLLAN - MOUNTING VARIATIONS L
Page 11 and 12: GEZE ROLLAN 40N/80 WITH GLASS CLAMP
Page 13 and 14: GEZE ROLLAN 40N WITH SOFTSTOP DRAW-
Page 15 and 16: GEZE Perlan 140 Perlan 140 - 6 3 0
Page 17 and 18: GEZE PERLAN 140 - PLANNING DRAWINGS
Page 19 and 20: GEZE PERLAN 140 - PLANNING DRAWINGS
Page 21 and 22: GEZE PERLAN 140 - MOUNTING VARIATIO
Page 23 and 24: CONCEALED WALL BRACKET FOR GEZE PER
Page 25 and 26: FH / 2 FH / 2 FH GEZE Perlan 140 Du
Page 27 and 28: GEZE Perlan 140 Telescope Roller-gu
Page 29 and 30: Perlan 140 system for sliding shutt
Page 31 and 32: PERLAN 140 GUIDE VERSIONS, EXAMPLES
Page 33: GEZE Perlan AUT The Perlan AUT set
Page 37 and 38: Accessories for GEZE Perlan 140 GLA
Page 39 and 40: GEZE PERLAN 140 WITH GLASS CLAMPING
Page 41 and 42: GEZE PERLAN 140 WITH SOFTSTOP DRAW-
Page 43 and 44: GEZE PERLAN 140 GGS Fig. 43-1 Tubul
Page 45 and 46: GEZE PERLAN - ORDER INFORMATION Rol
Page 47 and 48: GEZE LEVOLAN - PLANNING DRAWINGS Dr
Page 49 and 50: GEZE GEOLAN - MOUNTING VARIATIONS 1
Page 51 and 52: GEZE Aerolan GEZE AEROLAN - ORDER I
Page 53 and 54: GEZE AEROLAN - MOUNTING VARIATIONS
Page 55 and 56: GEZE Geolan GEZE GEOLAN - ORDER INF
Page 57 and 58: GEZE GEOLAN - MOUNTING VARIATIONS F
Page 59 and 60: GEZE Vetroslide 4 Roller-guided and

Sliding door Systems - BD Online Product Search

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?