Sliding Pocket Door Systems - Eclisse

Eclisse meets the needs of its customers
with experience, quality and technological
innovation.
Accurate machining and careful choice of
components guarantee the product durability.
The product range offers a great number of
proposals even exclusive and has the right space
/ design solution for any room.
ECLISSE s.r.l.
Via Sernaglia, 76 - 31053 Pieve di Soligo TV - ITALY
Tel. +39 0438 980 513 - Fax +39 0438 980 804
international.sales@eclisse.it
www.eclisseworld.com
Terms and conditions of
the guarantee:
www.eclisse.it
02/2011 © ECLISSE, all rights reserved.-The use, filing
and total or partial reproduction, using any mechanical or
electronic means, of texts, drawings and pictures contained
in this publication is strictly prohibited, unless specifically
approved in writing by ECLISSE. 600003701
Eclisse is UNI EN ISO 9001 approved
Sliding Pocket Door Systems
www.eclisseworld.com

www.eclisseworld.com
www.eclisseworld.com
All pictures and drawings are for illustrative purposes only. Eclisse s.r.l. reserves the
right to make changes in order to improve the product specifications without notice.
We may change the content of this catalogue, so if you have any queries related to the products you can
contact our call center. Eclisse refuses any responsibility for misprints, clerical errors or for any other reason.
ABOUT US
ECLISSE
Eclisse began producing
sliding pocket door systems
in 1989 in its factory near
Treviso in Italy and became
an immediate success.
This rapid success was
based on highly innovative
product design and
advanced production
techniques.
Better products and
better design quickly led
to expansion throughout
Europe where Eclisse
has become the largest
producer of these systems.
Its aim is to develop a construction technology characterized by innovation and excellence of quality
standards. It took more than 30 patents to make Eclisse frames revolutionise the way we think about sliding
door systems. Doors slide effortlessly inside the wall, opening up the room and dramatically changing your
perception of space.
Eclisse is a leading company in its sector in Italy and exports its products to the main European and world
countries. With its more than 2000 customers located in all areas, Eclisse markets its products all over
Europe and in the main non-European countries using a commercial network born in 1995 with the opening
of the first sister company in Quimper, France. Same to this has done Poland, Austria, Czech Republic,
Slovakia, Spain, Brasil, Germany and Romania. In all the other countries
Eclisse is present with distributors and/or agents.
If you require any further information contact us:
Tel. +39 0438 980 513
Fax +39 0438 980 804
international.sales@eclisse.it
Or visit our web site:
2 3
www.eclisseworld.com

pATenTS: ReAL InnOVATIOn CeRTIfICATeS And TeSTS
Eclisse has obtained more than 30 patents over the years.
Here are a few examples of really useful patented ideas:
� Luce sliding door system, put a socket in the pocket.
� Extractable running track, the whole running track mechanism can be removed without breaking
into the wall.
� No-Welding mesh framework, which means no rust or mesh detachment
� Tear Off Profile allows installation errors to be corrected quickly and easily
� Steel alignment bracers keep the frame perfectly in-line during installation.
� Self-centering guide, eliminates door mis-alignment and together with the anti warp profile ensures
a perfectly smooth action, even if the door warps!
Luce sliding
door system
Extractable
running track
No-Welding
mesh
framework
Tear Off
Profile
Steel
alignment
bracers
Selfcentering
guide
These are just a few of the patents Eclisse has obtained over the years.
Eclisse has been the first to introduce into the market the motorized unit, the self-closing mechanism and many
more useful and innovative solutions.
This certificate proves that Eclisse runners have
been independently tested to 100,000 open/
close cycles.
Eclisse company designs and manufactures sliding systems for doors and windows, referring to electrical
accessories and automations for pedestrian doors, complying with the regulation UNI EN 9001.
Eclisse has its products tested wherever possible by independent testing laboratories such as the Milan based
authorative C.S.I. in order to openly demonstrate the quality and reliability of its products.
Eclisse also chose to voluntarily adopt a Management System for Safety and Health of Workers in accordance
with OHSAS 18001. OHSAS identifies an internationally recognized standard that aims to protect the safety
and health of its employees and all those who come in contact with the business.
Durability
test in accordance with the European norm UNI EN 1527. After 100,000 opening and closing cycles (equal to
30 years of use) the runners showed no significant traces of wear or damage whatsoever.
Strong shock resistance:
an Eclisse sliding door system was left completely undamaged after passing the European recognised shock test
(a 30 kg bag crashed into it from different heights in line with UNI EN 1629:2000 requirements)
Anti-corrosion resistance:
an Eclisse sliding door system showed no sign of rusting after 240 hours of salt spray test in a 95% humidity
environment. C.S.I. Test.
The fully extractable track
Company certificate UNI EN ISO 9001
Quality materials for lasting customer satisfaction:
Company certificate OHSAS 18001.
is made from the more expensive aluminium alloy 6600 (UNI 9006:1) and protected by a 10 μm anodic layer
with a T5 thermic treatment.
These facts show the importance Eclisse gives to quality and durability making its products to the
highest possible quality level.
4 5
www.eclisseworld.com

6
THe eCLISSe AdVAnTAGe SOLID WALL
...easy to fit
on site
Eclisse designes
easy-to-fit sliding door
systems that can be
installed with no trouble
even when building
site conditions are not
excellent.
1
2
3
1
2
3
4
5
6
7
8
9
10 11
CEMENT PLASTERING DOES NOT FALL
because it is hold by the knurl* thick mesh (25 x 50 mm) placed in between the
plate and the edge of the cement plastering
* Knurl mesh: with furrowed and engraved wire so to improve cement plasteing adhesion
ExTrACTABLE TrACK SySTEM (Patented)
The Eclisse system has a patented extractable track which allows you to remove the complete
running track at any time without having to break the wall.
PrOTrUdINg CLOSE PLASTEr MESH (50x25)
It joins the counterframe with the wall becoming an integral part of it, thus offering an increasing
grasp of the plaster.
The finished wall won’t have faults.
MICrO-rIBBEd fILLEr PLATE
A 0.7 mm micro-ribbed filler plate is embossed to increase rigidity and strength.
*The embossing is a process of punching a flat sheet in order to create reliefs
12
13
4
5
6
7
8
9
10
11
12
13
HOrIzONTAL rEINfOrCEd BArS
16 horizontal reinforced bars hooked to plaster mesh give strength and rigidity, reducing the
plaster flexes over the time.
Their construction allows a perfectly spread plaster.
MESH-COUNTErfrAME fIxINg SySTEM WITHOUT WELdINg (Patented)
To avoid rust and possible mesh detachment.
VErTICAL rEINfOrCEd BArS
Eclisse verticals are specially formed from 1.2 mm galvanised steel which greatly increases the
strength and reduces flex.
These are the strongest of their type on the market.
ALIgNMENT BAr (Patented)
It allows a solid joint between the frame and the metal stop jamb during the installation.
It guarantees a perfectly centred position.
It comes standard with models UNICO, ending wall thickness 90, 108, 125, and 150
mm, and with model SyNTESIS ® LINE and SyNTESIS ® LINE double.
UNdEr frAME TEAr-Off PrOfILE (Patented)
To put quote mistakes right during the installation.
It comes with models UNICO and ExTENSION, ending wall thickness 90, 108, 125, and
150 mm (model SIdErALE excluded)
dOOr gUIdE
Quick and easy to fit to the frame with no holes to drill, this guide cleverly guarantees a perfectly
centred position.
POLySTyrENE jOINT OVEr THE UPrIgHT
It improves the strength against possible structural movements.
MAINTENANCE frEE TrACK ANd rUNNErS
Four sealed, chrome steel ball bearings in an enclosed track so they cannot derail and give a
smooth and reliable action; 80 kg max door weight, 120 kg on request.
TWO AdjUSTABLE dOOr STOPS
The first doorstop is factory set to stop the door 70 mm from the edge of the pocket, the second is
designed to lightly hold the door in the closed position to prevent bounce back.
METAL STOP jAMB
It reinforces the structure
It comes with models UNICO, NOVANTA with ending wall thickness 90, 108 mm
and UNILATErAL
www.eclisseworld.com
7

THe eCLISSe AdVAnTAGe STUD WALL
...easy assembly
The frame has been purposely designed to
be assembled very quickly and simply by
unskilled staff with just a screwdriver.
KIT ASSEMBLED
Packaging for stud wall
sliding door systems:
140 x 2310 x 110 mm
for the kit.
Starting from 640x2260x110 mm
for the assembled version.
1
2
3
4
5
6
VErSATILITy (for stud wall only)
The kit frame is extremely compact to store, taking up
no more than 1 mt 2 . for 50 units! One kit can fit a
finished wall thickness of 100mm and 125mm without
any further parts.
When specified the kit frame can be supplied fully
assembled for both single and double doors.
7
8
1
2
3
4
5
6
7
8
ExTrACTABLE TrACK SySTEM (Patented)
The Eclisse system has a patented extractable track which allows you to remove the complete
running track at any time without having to break the wall.
HOrIzONTAL rEINfOrCEd BArS
Specially formed from 0.7 mm galvanised steel, these bars have a dovetail form which greatly
increases the strength and reduces flex.
VErTICAL rEINfOrCEd BArS
Eclisse verticals are specially formed from 1.2 mm galvanised steel which greatly increases the
strength and reduces flex.
These are the strongest of their type on the market.
dOOr gUIdE
Quick and easy to fit to the frame with no holes to drill, this guide cleverly guarantees a perfectly
centred position.
METAL TrACK HOLdEr
This is better than wooden supports as it gives much more added strenght to the assembly.
MAINTENANCE frEE TrACK ANd rUNNErS
Four sealed, chrome steel ball bearings in an enclosed track so they cannot derail and give a
smooth and reliable action; 80 kg max door weight, 120 kg on request.
TWO AdjUSTABLE dOOr STOPS
The first doorstop is factory set to stop the door 70 mm from the edge of the pocket, the second is
designed to lightly hold the door in the closed position to prevent bounce back.
METAL STOP jAMB
It reinforces the structure
It comes with models UNICO, NOVANTA and UNILATErAL.
8 9
www.eclisseworld.com

Eclisse SYnTeSIS ® LIne
Profiles integrated structure
Verticals, upright and stop jamb are precoated
in the solid wall version and to be
filled in the stud wall version; this makes them
paintable with the same colour of the wall in
which the pocket door will be used.
frontal stop door plate
It offers a better design by hiding
the frontal stop.
A B
rear bracket and self-centering door
guide system (Italian patent pending)
Inserting the door panel is way easier thanks
to the combination of the rear bracket
(picture A) and the self centering door guide,
that does not require of being screwed on
the floor (picture B).
1
2
3
Counterframe SOLId WALL
7
16
15
7. Protruding mesh
The thick mesh (50x25
mm) and the special
knurling improve
the adhesion of the
concrete to the metal
sheet. The protruding
mesh unifies metal and
building structure.
8. Extractable track
system (Patented)
It is always possible
to substitute worn
mechanisms and to
add accessories.
10
18
2 2
18
5
8
9
17
17
9
8
1
6
4 4
10
12
14
13
11 11
3 3
9. Adjustable
brush holder
Fixes errors in the
installation of pocket
doors.
10. Horizontal
reinforced bars
14 reinforced
horizontal bars (12
for the stud wall
version) made in 7/10
galvanized steel, with
a dovetail form which
grant an increased
strength to lateral
pressures (in order to
have an un-deformable
internal passage).
11. Stop jamb
metal part prevents
structural deformation.
12. Alignment bar
As it crosses the pocket
door in all its width,
it permits to solidly
link the frame with the
posts, thus making the
assembly easier.
6
14
13
13. Template for lock
It offers the possibility to
easily install the lock.
14. Thermoplastic
transparent gasket
Completely transparent,
it improves the
aesthetics of the
verticals bars but
also the functionality
because the door panel
leans gently thank
to the resulting air
cushion.
12
1
5
15. Under-door
profile
It improves the strength
and the integrity of the
pocket door.
15
16. Adjustable rear
door stop
Lets you change the
door passage size
without removing the
door panel.
Eclisse SYnTeSIS ® LIne
10 11
16
Counterframe STUd WALL
17. Certified runners
with ball bearings
They guarantee long
lasting, smooth and
silent action. Standard
door weights 80 Kg.
18. frontal stop
It permits the frontal
adjustment and offers a
better closing.
4
Vertical reinforced bars
They improve the strength of the pocket door
by more than 40% in comparison with the
preceding profiles, thus the risk of bending is
considerably reduced.
5
reinforced joint
It guarantees linearity and a better linkage of
track, frame and verticals.
6
Strengthened brackets System
It guarantees linearity and strength.
www.eclisseworld.com

Compared to conventional, hinged
doors, sliding pocket doors offer
advantages in every living space.
It is estimated that in an average home,
more than 8% extra space can be
released by the use of sliding doors;
that’s 8 sq.mt. extra space in a 100
sq.mt. apartment!
Eclisse have developed an elegant,
practical alternative – a framework that
forms part of the wall and allows your
doors to slide effortlessly inside the walls
giving you more space.
Sliding pocket doors take up no living
space so whether you are designing
new-build or refurbishment this is a
modern, intelligent use of space using
the very latest development in door
closures. Eclisse only manufactures the
frame so you can use any conventional
door of your choice.
Reasons Not To Use a Hinged Door
� Restricts your planning options
� Wastes lots of space
� Difficult to use in small areas
A ReASOned CHOICe
When you use a hinged door...
...you lose the use of a significant
amount of space
Use an Eclisse sliding door and...
...you gain a significant
amount of space
An extra 8m 2 of space
The frame is made from top quality
materials and components to give a
long, trouble free life and the patented
extractable track system can be removed
at any time in the future without breaking
into the wall.
Eclisse have been manufacturing the
frames for sliding pocket doors since
1989 and are the largest producer of
these integrated systems in the world.
This has been achieved through
constant technical innovation with high
performance materials and a finished
product that is easy to install and gives
long term customer satisfaction.
The standard range has frames for most
imaginable applications including single
doors, double doors, telescopic sliding
doors, side by side doors, slide and fold
doors and even curved doors!
Reasons to choose Eclisse
� More freedom in your lay out
� Uses all the available space
� Opens up smaller areas
12 13
www.eclisseworld.com

Eclisse SInGLe
Eclisse LUCe single
Eclisse SYnTeSIS ® LIne
InTeRIOR deSIGn
Eclisse dOUBLe
Eclisse LUCe double
Eclisse SYnTeSIS ® LIne double
Eclisse TeLeSCOpIC single
Eclisse UnILATeRAL Eclisse CIRCULAR single
Sliding door systems for stud and solid walls
14 15
www.eclisseworld.com
Eclisse TeLeSCOpIC double
Eclisse nOVAnTA Eclisse CIRCULAR double

Eclisse SINGLE
Eclisse SInGLe Eclisse dOUBLe
25
H1
25
H1
25
25
C
A B
15
C
A B
25 L 25
A
C
Sliding door systems
for single doors
B
C
A B
5
90 - 108 - 125 - 150
15
54-72-89-114
100 - 125
5
50
50
H H1
90-108-125-150
H H1
100 - 125
25
L
25 58 - 83 12,5
frames for single doors
Measures related to Italian standards, other dimensions available
Warning: max. door thickness 40 mm when using frame having 54 mm internal
space (including a possible pane holding profile)
� Max door weight 80 kg (120 kg on request)
� Possibility of made-to-measure dimensions
standard model for STUd WALL standard model for SOLId WALL
Notes dimensions dimensions are given in mm.
15
H1
15
5
H1
5
C
B A B 15
B
B
Sliding door systems
for double doors
C
A B
90 - 108 - 125 - 150
25 L 25 54-72-89-114
C
A B
B
C
A
B
5
15
100 - 125
25 L 25 58 - 83
frames for double doors
Measures related to Italian standards, other dimensions available
Standard model for SOLID WALL Standard model for STUD WALL Standard model for SOLID WALL Standard model for STUD WALL
Max. Passage Size Overall Dimensions Overall Dimensions
Max. Passage Size Overall Dimensions Overall Dimensions
L x H C x H1 A B C x H1 A B
L x H C x H1 A B C x H1 A B
600 x 2000/2100 1315 x 2090/2190 650 625 1297 x 2085/2185 650 617
1200 x 2000/2100 2530 x 2090/2190 1250 625 2494 x 2085/2185 1250 617
650 x 2000/2100 1465 x 2090/2190 700 725 1447 x 2085/2185 700 717
1300 x 2000/2100 2830 x 2090/2190 1350 725 2794 x 2085/2185 1350 717
700 x 2000/2100 1515 x 2090/2190 750 725 1497 x 2085/2185 750 717
1400 x 2000/2100 2930 x 2090/2190 1450 725 2894 x 2085/2185 1450 717
750 x 2000/2100 1665 x 2090/2190 800 825 1647 x 2085/2185 800 817
1500 x 2000/2100 3230 x 2090/2190 1550 825 3194 x 2085/2185 1550 817
800 x 2000/2100 1715 x 2090/2190 850 825 1697 x 2085/2185 850 817
1600 x 2000/2100 3330 x 2090/2190 1650 825 3294 x 2085/2185 1650 817
850 x 2000/2100 1865 x 2090/2190 900 925 1847 x 2085/2185 900 917
1700 x 2000/2100 3630 x 2090/2190 1750 925 3594 x 2085/2185 1750 917
900 x 2000/2100 1915 x 2090/2190 950 925 1897 x 2085/2185 950 917
1800 x 2000/2100 3730 x 2090/2190 1850 925 3694 x 2085/2185 1850 917
950 x 2000/2100 2065 x 2090/2190 1000 1025 2047 x 2085/2185 1000 1017
1900 x 2000/2100 4030 x 2090/2190 1950 1025 3994 x 2085/2185 1950 1017
1000 x 2000/2100 2115 x 2090/2190 1050 1025 2097 x 2085/2185 1050 1017
2000 x 2000/2100 4130 x 2090/2190 2050 1025 4094 x 2085/2185 2050 1017
Warning: max. door thickness 40 mm when using frame having 54 mm internal
space (including a possible pane holding profile)
� Max door weight 80 kg (120 kg on request)
� Possibility of made-to-measure dimensions
5
50
90-108-125-150
H H1
50
H H1
100 - 125
12,5
Eclisse DOUBLE
Sliding door systems
for single doors, wiring ready
frames for single doors
Measures related to Italian standards, other dimensions available
frames for double doors
Measures related to Italian standards, other dimensions available
16 17
www.eclisseworld.com
Eclisse LUCE single
Eclisse LUCe single Eclisse LUCe double
25
H1
16
H1
25
16
A
C
175
285
1060
195
C
A B
25 L 25 64
A
C
B
B
15
C
A B
1490
25 L 25 64
1920
150
15
50
H H1
Warning: We recommend to install a door panel with 43 mm maximum thickness
(including a possible pane holding profile)
� Max depth of box 40 mm (2 boxes are supplied)
� Max door weight 80 kg (120 kg on request)
� Possibility of made-to-measure dimensions
20
150
20
50
12,5
150
H H1
150
standard model for STUd WALL standard model for SOLId WALL
Notes dimensions dimensions are given in mm.
20
15
H1
15
B
B
Sliding door systems
for double doors, wiring ready
C A B
195
C
A B
25 L 25
C
A B
C
B A
B 20
15
175
285
1060
64
1490
25 L 25 64
Standard model for SOLID WALL Standard model for STUD WALL Standard model for SOLID WALL Standard model for STUD WALL
Max. Passage Size Overall Dimensions Overall Dimensions
Max. Passage Size Overall Dimensions Overall Dimensions
L x H C x H1 A B C x H1 A B
L x H C x H1 A B C x H1 A B
600 x 2000/2100 1315 x 2090/2190 650 625 1301 x 2085/2185 650 615
1200 x 2000/2100 2530 x 2090/2190 1250 625 2520 x 2085/2185 1250 615
650 x 2000/2100 1465 x 2090/2190 700 725 1451 x 2085/2185 700 715
1300 x 2000/2100 2830 x 2090/2190 1350 725 2820 x 2085/2185 1350 715
700 x 2000/2100 1515 x 2090/2190 750 725 1501 x 2085/2185 750 715
1400 x 2000/2100 2930 x 2090/2190 1450 725 2920 x 2085/2185 1450 715
750 x 2000/2100 1665 x 2090/2190 800 825 1651 x 2085/2185 800 815
1500 x 2000/2100 3230 x 2090/2190 1550 825 3220 x 2085/2185 1550 815
800 x 2000/2100 1715 x 2090/2190 850 825 1701 x 2085/2185 850 815
1600 x 2000/2100 3330 x 2090/2190 1650 825 3320 x 2085/2185 1650 815
850 x 2000/2100 1865 x 2090/2190 900 925 1851 x 2085/2185 900 915
1700 x 2000/2100 3630 x 2090/2190 1750 925 3620 x 2085/2185 1750 915
900 x 2000/2100 1915 x 2090/2190 950 925 1901 x 2085/2185 950 915
1800 x 2000/2100 3730 x 2090/2190 1850 925 3720 x 2085/2185 1850 915
950 x 2000/2100 2065 x 2090/2190 1000 1025 2051 x 2085/2185 1000 1015
1900 x 2000/2100 4030 x 2090/2190 1950 1025 4020 x 2085/2185 1950 1015
1000 x 2000/2100 2115 x 2090/2190 1050 1025 2101 x 2085/2185 1050 1015
2000 x 2000/2100 4130 x 2090/2190 2050 1025 4120 x 2085/2185 2050 1015
20
H1
B
Warning: We recommend to install a door panel with 43 mm maximum thickness
(including a possible pane holding profile)
� Max depth of box 40 mm (2 boxes are supplied)
� Max door weight 80 kg (120 kg on request)
� Possibility of made-to-measure dimensions
20
1920
150
150
15
50
H H1
150
50
H H1
150
12,5
Eclisse LUCE double

Eclisse SYNTESIS ® LINE
Eclisse SYnTeSIS ® LIne Eclisse SYnTeSIS ® Eclisse SYnTeSIS LIne
® LIne double Eclisse SYnTeSIS ® LIne double
H1
40
50
50
20
20
C
A B
C
A B
200
108 - 125 - 150
Out of standard: It’s possible to produce pocket doors with width from 600 mm to
1300 mm and height from 1000 mm to 2700 mm.
Warning
� The passage A is 7 mm reduced.
� Mandatory ending thickness 125, 150 mm for A more than 1000 mm for any
heights.
� Max door thickness 40 mm (including any aluminum frames).
� Standard door’s weight is 80 kg.
WARNING
Sliding door systems
for single doors
20
HP
LP 54
H H1
108 - 125 - 150
standard model for SOLId WALL
Notes
H1
B
B
Sliding door systems
for double doors
C
A B
C
A B
108 - 125 - 150
LP 54
Out of standard: It’s possible to produce pocket doors with width from 1200 mm to
2600 mm and height from 1000 mm to 2700 mm.
Warning
� The passage A is 14 mm reduced.
� Mandatory ending thickness 125, 150 mm for A more than 2000 mm for any
heights.
� Max door thickness 40 mm (including any aluminum frames).
� Standard door’s weight is 80 kg.
Because of production needs and safety reasons of the system, Eclisse expects that the door panel is left protruding 80 mm.
� If needed, the adjustable rear stop door allows to modify the real passage size.
� In order to make the door completely disappear a passing routing is required.
� The routing for the door guide must have the following dimensions: 7 x 15 mm.
dimensions dimensions are given in mm.
HP
H H1
108 - 125 - 150
N.B.: The door panel for
SYNTESIS ® LINE must be
milled along the upper and
lower profiles, as shown in the
drawings (milling not require
on all-glass doors)
frames for single doors
frames for double doors
Measures related to Italian standards, other dimensions available
Measures related to Italian standards, other dimensions available
Standard model for SOLID WALL DOOR PANEL Standard model for SOLID WALL
DOOR PANEL
Max Passage Size Overall Dimensions
Max Passage Size Overall Dimensions
A x H B C x H1 LP HP
A x H B C x H1 LP HP
600 x 2000/2100 735 1378 x 2060/2160 615 1992/2092
1200 x 2000/2100 735 2656 x 2060/2160 615 1992/2092
700 x 2000/2100 835 1578 x 2060/2160 715 1992/2092
1400 x 2000/2100 835 3056 x 2060/2160 715 1992/2092
800 x 2000/2100 935 1778 x 2060/2160 815 1992/2092
1600 x 2000/2100 935 3456 x 2060/2160 815 1992/2092
900 x 2000/2100 1035 1978 x 2060/2160 915 1992/2092
1800 x 2000/2100 1035 3856 x 2060/2160 915 1992/2092
1000 x 2000/2100 1135 2178 x 2060/2160 1015 1992/2092
2000 x 2000/2100 1135 4256 x 2060/2160 1015 1992/2092
Eclisse SYNTESIS ® LINE double
18 19
www.eclisseworld.com
Eclisse SYNTESIS ® LINE
H1
50
50
40
20
20
C
A B
Sliding door systems
for single doors
C
A B
200
HP
100 - 125 - 150
100 - 125 - 150
LP 54 12,5
Max Passage Size Overall Dimensions
A x H B C x H1 LP HP
600 x 2000/2100 735 1378 x 2060/2160 615 1992/2092
700 x 2000/2100 835 1578 x 2060/2160 715 1992/2092
800 x 2000/2100 935 1778 x 2060/2160 815 1992/2092
900 x 2000/2100 1035 1978 x 2060/2160 915 1992/2092
1000 x 2000/2100 1135 2178 x 2060/2160 1015 1992/2092
WARNING
20
Out of standard: It’s possible to produce pocket doors with width from 600 mm to
1300 mm and height from 1000 mm to 2700 mm.
Warning
� The passage A is 7 mm reduced.
� Mandatory ending thickness 125, 150 mm for H starting from 2150 mm; A more
than 1000 mm for any heights.
� Max door thickness 40 mm (including any aluminum frames).
� Standard door’s weight is 80 kg.
H H1
standard model for STUd WALL
dimensions dimensions are given in mm.
Notes
H1
B
B
Sliding door systems
for double doors
C
A B
C
A B
LP
HP
100 - 125 - 150
Max Passage Size Overall Dimensions
A x H B C x H1 LP HP
1200 x 2000/2100 735 2656 x 2060/2160 615 1992/2092
1400 x 2000/2100 835 3056 x 2060/2160 715 1992/2092
1600 x 2000/2100 935 3456 x 2060/2160 815 1992/2092
1800 x 2000/2100 1035 3856 x 2060/2160 915 1992/2092
2000 x 2000/2100 1135 4256 x 2060/2160 1015 1992/2092
54
H H1
100 - 125 - 150
12,5
N.B.: The door panel for
SYNTESIS ® LINE must be
milled along the upper and
lower profiles, as shown in the
drawings (milling not require
on all-glass doors)
frames for single doors
frames for double doors
Measures related to Italian standards, other dimensions available
Measures related to Italian standards, other dimensions available
Standard model for STUD WALL DOOR PANEL Standard model for STUD WALL
DOOR PANEL
Out of standard: It’s possible to produce pocket doors with width from 1200 mm to
2600 mm and height from 1000 mm to 2700 mm.
Warning
� The passage A is 7 mm reduced.
� Mandatory ending thickness 125, 150 mm for H starting from 2150 mm; A more
than 2000 mm for any heights.
� Max door thickness 40 mm (including any aluminum frames).
� Standard door’s weight is 80 kg.
Because of production needs and safety reasons of the system, Eclisse expects that the door panel is left protruding 80 mm.
� If needed, the adjustable rear stop door allows to modify the real passage size.
� In order to make the door completely disappear a passing routing is required.
� The routing for the door guide must have the following dimensions: 7 x 15 mm.
Eclisse SYNTESIS ® LINE double

Eclisse TELESCOPIC single
Eclisse TeLeSCOpIC single Eclisse TeLeSCOpIC double
25
H1
16
H1
16
25
Sliding door systems
for 2 parallel doors
C
A B 15
C
A B
25
L
25
C
A B
C
A B
Warning: We recommend to install a door panel with 43 mm maximum thickness
(including a possible pane holding profile)
When fully open, the doors will protrude slightly from the frame/jambs.
� Max door weight 80 kg.
144
22
180
180
15
22
50
H H1
180
25 134
L
25 12,5
50
H H1
180
standard model for STUd WALL standard model for SOLId WALL
Notes dimensions dimensions are given in mm.
H1
15
15
22
B
B
Sliding door systems
for 2+2 parallel doors
C
A B
B
C
A
B
25
L
25 144
C
A B
C
A B
25 L
25
frames for 2 parallel doors
frames for 2+2 parallel doors
Measures related to Italian standards, other dimensions available
Measures related to Italian standards, other dimensions available
Standard model for SOLID WALL Standard model for STUD WALL Standard model for SOLID WALL Standard model for STUD WALL
Max. Passage Size Overall Dimensions Overall Dimensions
Max. Passage Size Overall Dimensions Overall Dimensions
L x H C x H1 A B C x H1 A B
L x H C x H1 A B C x H1 A B
1140 x 2000/2100 1855 x 2090/2190 1190 625 1853 x 2085/2185 1190 625
2300 x 2000/2100 3630 x 2090/2190 2350 625 3644 x 2085/2185 2350 625
1340 x 2000/2100 2155 x 2090/2190 1390 725 2153 x 2085/2185 1390 725
2700 x 2000/2100 4230 x 2090/2190 2750 725 4244 x 2085/2185 2750 725
1540 x 2000/2100 2455 x 2090/2190 1590 825 2453 x 2085/2185 1590 825
3100 x 2000/2100 4830 x 2090/2190 3150 825 4844 x 2085/2185 3150 825
1740 x 2000/2100 2755 x 2090/2190 1790 925 2753 x 2085/2185 1790 925
3500 x 2000/2100 5430 x 2090/2190 3550 925 5444 x 2085/2185 3550 925
1940 x 2000/2100 3055 x 2090/2190 1990 1025 3053 x 2085/2185 1990 1025
3900 x 2000/2100 6030 x 2090/2190 3950 1025 6044 x 2085/2185 3950 1025
2140 x 2000/2100 3355 x 2090/2190 2190 1125 3353 x 2085/2185 2190 1165
4300 x 2000/2100 6630 x 2090/2190 4350 1125 6644 x 2085/2185 4350 1165
2340 x 2000/2100 3655 x 2090/2190 2390 1225 3653 x 2085/2185 2390 1225
4700 x 2000/2100 7230 x 2090/2190 4750 1225 7244 x 2085/2185 4750 1225
22
H1
B
Warning: We recommend to install a door panel with 43 mm maximum thickness
(including a possible pane holding profile)
When fully open, the doors will protrude slightly from the frame/jambs.
� Max door weight 80 kg.
15
22
134
180
180
15
22
50
H H1
180
50
H H1
180
12,5
Eclisse TELESCOPIC double
20 21
www.eclisseworld.com
Eclisse CIRCULAR single
Eclisse CIRCULAR single Eclisse CIRCULAR double
R
30
L
A
Curved sliding
door systems
Left Right
Note: always state opening direction of door
30
B
125
72
H H1
125
standard model for SOLId WALL
C R
frames for curved doors
Measures related to Italian standards, other dimensions available
Standard model for SOLID WALL Standard model for STUD WALL
Radius Max. Passage Size Overall Dimensions Overall Dimensions
R L x H C x H1 A B C x H1 A B
1000 600 x 2000/2100 1250 x 2158/2258 660 650 1250 x 2158/2258 660 650
700 x 2000/2100 1390 x 2158/2258 760 735 1390 x 2158/2258 760 735
800 x 2000/2100 1545 x 2158/2258 860 860 1545 x 2158/2258 860 860
900 x 2000/2100 1650 x 2158/2258 960 940 1650 x 2158/2258 960 940
1000 x 2000/2100 1760 x 2158/2258 1060 1055 1760 x 2158/2258 1060 1055
1200 600 x 2000/2100 1295 x 2158/2258 660 665 1295 x 2158/2258 660 665
700 x 2000/2100 1450 x 2158/2258 760 755 1450 x 2158/2258 760 755
800 x 2000/2100 1600 x 2158/2258 860 840 1600 x 2158/2258 860 840
900 x 2000/2100 1770 x 2158/2258 960 970 1770 x 2158/2258 960 970
1000 x 2000/2100 1890 x 2158/2258 1060 1055 1890 x 2158/2258 1060 1055
1300 600 x 2000/2100 1305 x 2158/2258 660 670 1305 x 2158/2258 660 670
700 x 2000/2100 1470 x 2158/2258 760 760 1470 x 2158/2258 760 760
800 x 2000/2100 1625 x 2158/2258 860 850 1625 x 2158/2258 860 850
900 x 2000/2100 1775 x 2158/2258 960 935 1775 x 2158/2258 960 935
1000 x 2000/2100 1940 x 2158/2258 1060 1065 1940 x 2158/2258 1060 1065
1500 600 x 2000/2100 1330 x 2158/2258 660 675 1330 x 2158/2258 660 675
700 x 2000/2100 1500 x 2158/2258 760 770 1500 x 2158/2258 760 770
800 x 2000/2100 1665 x 2158/2258 860 860 1665 x 2158/2258 860 860
900 x 2000/2100 1825 x 2158/2258 960 950 1825 x 2158/2258 960 950
1000 x 2000/2100 1975 x 2158/2258 1060 1040 1975 x 2158/2258 1060 1040
1700 600 x 2000/2100 1300 x 2158/2258 660 640 1300 x 2158/2258 660 640
700 x 2000/2100 1480 x 2158/2258 760 730 1480 x 2158/2258 760 730
800 x 2000/2100 1695 x 2158/2258 860 870 1695 x 2158/2258 860 870
900 x 2000/2100 1865 x 2158/2258 960 965 1865 x 2158/2258 960 965
1000 x 2000/2100 2025 x 2158/2258 1060 1055 2025 x 2158/2258 1060 1055
1800 600 x 2000/2100 1350 x 2158/2258 660 685 1350 x 2158/2258 660 685
700 x 2000/2100 1530 x 2158/2258 760 780 1530 x 2158/2258 760 780
800 x 2000/2100 1705 x 2158/2258 860 870 1705 x 2158/2258 860 870
900 x 2000/2100 1875 x 2158/2258 960 965 1875 x 2158/2258 960 965
1000 x 2000/2100 2040 x 2158/2258 1060 1055 2040 x 2158/2258 1060 1055
2000 600 x 2000/2100 1360 x 2158/2258 660 690 1360 x 2158/2258 660 690
700 x 2000/2100 1540 x 2158/2258 760 785 1540 x 2158/2258 760 785
800 x 2000/2100 1720 x 2158/2258 860 880 1720 x 2158/2258 860 880
900 x 2000/2100 1900 x 2158/2258 960 970 1900 x 2158/2258 960 970
1000 x 2000/2100 2070 x 2158/2258 1060 1065 2070 x 2158/2258 1060 1065
� Max door weight 80 kg.
� Possibility of made-to-measure dimensions
Notes dimensions dimensions are given in mm.
B
30
Double curved sliding
door systems
frames for curved double doors
Measures related to Italian standards, other dimensions available
Standard model for SOLID WALL Standard model for STUD WALL
Radius Max. Passage Size Overall Dimensions Overall Dimensions
R L x H C x H1 A B C x H1 A B
1000 1200 x 2000/2100 1870 x 2158/2258 1260 695 1870 x 2158/2258 1260 695
1400 x 2000/2100 1840 x 2158/2258 1460 820 1840 x 2158/2258 1460 820
� Max door weight 80 kg.
� Possibility of made-to-measure dimensions
L
A
1200 1200 x 2000/2100 2115 x 2158/2258 1260 665 2115 x 2158/2258 1260 665
1400 x 2000/2100 2265 x 2158/2258 1460 800 2265 x 2158/2258 1460 800
1600 x 2000/2100 2295 x 2158/2258 1660 930 2295 x 2158/2258 1660 930
1800 x 2000/2100 2180 x 2158/2258 1860 1055 2180 x 2158/2258 1860 1055
1300 1200 x 2000/2100 2180 x 2158/2258 1260 670 2180 x 2158/2258 1260 670
1400 x 2000/2100 2345 x 2158/2258 1460 760 2345 x 2158/2258 1460 760
1600 x 2000/2100 2460 x 2158/2258 1660 895 2460 x 2158/2258 1660 895
1800 x 2000/2100 2455 x 2158/2258 1860 1025 2455 x 2158/2258 1860 1025
2000 x 2000/2100 2320 x 2158/2258 2060 1150 2320 x 2158/2258 2060 1150
1500 1200 x 2000/2100 2300 x 2158/2258 1260 680 2300 x 2158/2258 1260 680
1400 x 2000/2100 2520 x 2158/2258 1460 770 2520 x 2158/2258 1460 770
1600 x 2000/2100 2730 x 2158/2258 1660 910 2730 x 2158/2258 1660 910
1800 x 2000/2100 2835 x 2158/2258 1860 1000 2835 x 2158/2258 1660 1000
2000 x 2000/2100 2875 x 2158/2258 2060 1130 2875 x 2158/2258 2060 1130
1700 1200 x 2000/2100 2330 x 2158/2258 1260 640 2330 x 2158/2258 1260 640
1400 x 2000/2100 2660 x 2158/2258 1460 780 2660 x 2158/2258 1460 780
1600 x 2000/2100 2885 x 2158/2258 1660 870 2885 x 2158/2258 1660 870
1800 x 2000/2100 3065 x 2158/2258 1860 965 3065 x 2158/2258 1860 965
2000 x 2000/2100 3225 x 2158/2258 2060 1100 3225 x 2158/2258 2060 1100
1800 1200 x 2000/2100 2355 x 2158/2258 1260 640 2355 x 2158/2258 1260 640
1400 x 2000/2100 2685 x 2158/2258 1460 780 2685 x 2158/2258 1460 780
1600 x 2000/2100 2930 x 2158/2258 1660 875 2930 x 2158/2258 1660 875
1800 x 2000/2100 3135 x 2158/2258 1860 970 3135 x 2158/2258 1860 70
2000 x 2000/2100 3325 x 2158/2258 2060 1105 3325 x 2158/2258 2060 1105
2000 1200 x 2000/2100 2385 x 2158/2258 1260 645 2385 x 2158/2258 1260 645
1400 x 2000/2100 2760 x 2158/2258 1460 785 2760 x 2158/2258 1460 785
1600 x 2000/2100 3030 x 2158/2258 1660 880 3030 x 2158/2258 1660 880
1800 x 2000/2100 3275 x 2158/2258 1860 975 3275 x 2158/2258 1860 975
2000 x 2000/2100 3480 x 2158/2258 2060 1070 3480 x 2158/2258 2060 1070
C
30
B
125
72
125
H H1
Eclisse CIRCULAR double

Eclisse UNILATERAL
Eclisse UnILATeRAL Eclisse nOVAnTA
38
H1
25
H1
Sliding door systems
for 2 doors side by side
Note: always
state opening
direction of door
Warning: max. door thickness 40 mm when using frame having 54 mm internal
space (including a possible pane holding profile)
� Max door weight 80 kg (120 kg on request)
� Possibility of made-to-measure dimensions
A
B
A
C
B
A
C
13 25 A B
72
A 25 13
25
72
A
C
B
A
38
200
25 L 25
25
175
C
A B
A 25
54
54
25 L
25
50
50
H H1
200
H H1
175
12,5
standard model for STUd WALL standard model for SOLId WALL
Notes dimensions dimensions are given in mm.
25
H1
90 - 108 - 125 - 150
25
C
A B 15
C
A
25 L
25
Sliding door systems
for sectional sliding doors
Left Right
Note: always state opening direction of door
Warning: max. door thickness 40 mm when using frame having 54 mm internal
space (including a possible pane holding profile)
� Max door weight 80 kg.
� Possibility of made-to-measure dimensions
P2
P1
B
54 - 72 - 89 - 114
90 - 108 - 125 - 150
C
25 A B 20
100 - 125
H1
C
25
A
L
25
frames for 2 doors side by side
frames for sectional doors
Measures related to Italian standards, other dimensions available
Measures related to Italian standards, other dimensions available
Standard model for SOLID WALL Standard model for STUD WALL Standard model for SOLID WALL Standard model for STUD WALL
Max. Passage Size Overall Dimensions Overall Dimensions
Max. Passage Size Overall Dimensions Overall Dimensions
L x H C x H1 A B C x H1 A B
L x H C x H1 A B C x H1 A B
600+600 x 2000/2100 2026 x 2090/2190 650 650 2000 x 2085/2185 650 650
600 x 2000/2100 1015 x 2090/2190 650 325 1010 x 2085/2185 650 315
650+650 x 2000/2100 2226 x 2090/2190 700 750 2200 x 2085/2185 700 750
650 x 2000/2100 1165 x 2090/2190 700 425 1160 x 2085/2185 700 415
700+700 x 2000/2100 2326 x 2090/2190 750 750 2300 x 2085/2185 750 750
700 x 2000/2100 1215 x 2090/2190 750 425 1210 x 2085/2185 750 415
750+750 x 2000/2100 2526 x 2090/2190 800 850 2500 x 2085/2185 800 850
750 x 2000/2100 1265 x 2090/2190 800 425 1260 x 2085/2185 800 415
800+800 x 2000/2100 2626 x 2090/2190 850 850 2600 x 2085/2185 850 850
800 x 2000/2100 1315 x 2090/2190 850 425 1310 x 2085/2185 850 415
850+850 x 2000/2100 2826 x 2090/2190 900 950 2800 x 2085/2185 900 950
850 x 2000/2100 1465 x 2090/2190 900 525 1460 x 2085/2185 900 515
900+900 x 2000/2100 2926 x 2090/2190 950 950 2900 x 2085/2185 950 950
900 x 2000/2100 1515 x 2090/2190 950 525 1510 x 2085/2185 950 515
950+950 x 2000/2100 3126 x 2090/2190 1000 1050 3100 x 2085/2185 1000 1050
950 x 2000/2100 1565 x 2090/2190 1000 525 1560 x 2085/2185 1000 515
1000+1000 x 2000/2100 3226 x 2090/2190 1050 1050 3200 x 2085/2185 1050 1050
1000 x 2000/2100 1615 x 2090/2190 1050 525 1610 x 2085/2185 1050 515
100 - 125
25
P2
P1
B
54 - 79
15
20
50
12,5
H H1
50
H H1
Eclisse NOVANTA
22 23
www.eclisseworld.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Eclisse supplies only the metal
components (track, runners,
brackets, door-stops, door-guide
and rail mounting brackets).
Components Sectional view
Aluminum running track 2000mm long
Nr. 4 medium nuts M5 znb
Nr. 4 washers M5 znb
Nr. 4 screws TPSEI M5 x 16 znb
Nr. 2 runners
Nr. 2 high nuts M8 znb
Nr. 2 low nuts M8 znb
Nr. 2 washers M8 znb
Nr. 2 screws M8 x 45 znb
Nr. 8 screws M4,5 x 25 znb
Nr. 2 door panel brackets
Nr. 2 movable door stoppers
Nr. 2 crinkle washers anti-slipping
Nr. 2 screws M6 x 30
Nr. 1 doorguide
Nr. 2 brackets for fixing track
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ACCeSSORIeS
eXTeRnAL WALL SLIdInG KIT
16
1
9
11
28÷52
2
3
4
5
7
8

ACCeSSORIeS ACCeSSORIeS
MOTORIZed SInGLe or dOUBLe
The motorisation is easy to install any time.
The motor is mounted on the track which itself
is extractable.
Free choice as far as jambs and trims.
RALLenTY SOfT
closes
slowly and softly
Unique on the market, this electronic device is contained within the
framework and it is not visible externally.
It performs a fast opening but a soft closing movement.
(simultaneously when double door). The system is supplied with the
motor already mounted onto the track, an electronic circuit board
with micro switches and a power transformer.
Its speed is self adjusting based on passage dimensions and door’s
weight.
In case of blackout, after 10 seconds the door can be open/close
manually.
The Eclisse motorised unit is suitable for:
� models UNICO, dOUBLE, LUCE single and double,
UNILATErAL, with max clearance of mm 1500 and H 2400 mm.
� sliding systems with 100 mm or more finished thickness
� the door weight limit is 70 kg, either for wooden or glass panels
� Home automation systems
Important: When inserting in a sliding systems already installed,
the door passage will decrease of 80 mm
A futuristic addition for any Eclisse SINgLE, dOUBLE (1) , LUCE
single, LUCE double (1) , TELESCOPIC single (2) , TELESCOPIC
double (1)(2) , UNILATErAL.
Just slide the door towards it’s closed position and at a certain point
the door/s takes over and softly closes itself/themselves.
It really is as simple as that!
� Useful, easy to use and increased safety from trapped fingers,
once you used it there is no substitute.
� Can be installed retrospectively on existing Eclisse systems.
Rallenty Soft is available in 3 versions:
Rallenty Soft with self-closing system, Rallenty Soft for door panels
up to 40 kg. and Rallenty Soft for door panels heavier than 40 kg.
( 1) Systems that need two rallenty soft, one per each door frame, on TELESCOPIC
system, only one rallenty soft for synchronization system.
( 2) On 25+25 weight door frames the system slows down the closing movement
and closes the doors. On over 25+25 kg weight (max 50+50 kg) door frames,
the system slows only down the closing movement.
Only for wooden doors.
It can be installed on dOUBLE, LUCE double.
It Allows the simultaneous opening and closing of the doors moving
only one of them.
You get a convenient and comfortable movement. Thanks to the
removable track, is also applicable thereafter to pocket door
already installed.
It can be installed on all double systems with passage size from
600+600 mm to 1000+1000 mm.
On 25+25 weight door frames the system slows down the closing
movement and closes the doors.
On over 25+25 kg weight (max 50+50 kg) door frames, the
system slows only down the closing movement.
Only for wooden doors. Ideal for living rooms, meeting rooms...
Including rallenty Soft.
Note: on the counterframes with passage size 600+600 door
frames stick out from the Jambs.
It can be installed on UNICO, LUCE unico and UNILATErALE,
only on wooden doors.
Thanks to self closing system, once opened, the door closes itself
automatically. It is a mechanical system, it can be applied also on a
pocket door already installed in only 5 minutes.
� Adjustable closing door speed
(no need to remove door or jambs)
� It is invisible from the outside
� Maximum drag 40 kg.
� In order to have a smooth closing movement it is suggested the
matching with rallenty soft system
Ideal for bathrooms, closets, storage, etc etc.
Note: self closing system installation narrows the passage size of 1 cm.
dOUBLe dOOR CO-ORdInATIOn
SeLf CLOSInG SYSTeM
24 25
www.eclisseworld.com
co-ordinated
open and close
once opened
it closes by itself

26
ACCeSSORIeS ACCeSSORIeS
TeLeSCOpIC SYnCHROnISATIOn
simultaneous
opening doors
UndeR dOOR pROfILe
The advantages offered by the Under door Profile are
an improved sliding action, an increased wear resistance
and protection against deformation due to humidity.
dOUBLe JUnCTIOn
It can be installed on TELESCOPIC single and TELESCOPIC
double*, it allows the simultaneous movement of door frames which
slide on the same direction. It is installed directly on the door (no need
to change the tracks), and it can be applied to telescopic systems from
600+600 mm to 1200+1200 mm.
Max door weight 80 kg.
Ideal for living rooms, terraces, meeting rooms...
The synchronisation system ensures that the two doors slide smoothly
together in the same direction, therefore very safely.
With the new synchronisation system the doors are connected and work
together in a smooth action. The first door “hitches” on the second one
right away and the two panels slide together without jerking or rebound
inherent in the old-style systems.
rallenty Soft system matchable.
On 25+25 weight door frames the system slows down the closing
movement and closes the doors.
On over 25+25 kg weight (max 50+50 kg) door frames, the system
slows only down the closing movement.
* On TELESCOPIC double system two synchronizations are needed.
� When fully open, the doors will protrude slightly from the frame/jambs.
Eclisse offers door manufacturers an extruded aluminium guide section,
specifically designed and developed to be fitted into the bottom of
disappearing sliding doors.
This Profile is easy to fit even in existing installations without requiring
any special operations apart from routing.
10.3
It is an universal accessory that permits to change two single frames in
a double one.
� Available for Unico SD and Luce SD.
� Available for stud and solid wall version and for different sizes
(max. clearance mm1000+1000). Differently from the normal DD
models, passage clearance increase of 50 mm.
Warning
When assembling a double door by using the Eclisse joining kit accessory,
door passage (clearance) will increase of 5 cm compared to traditional
‘estensione’ model. The compensation profiles are to be used in order to
decrease that width difference to install standard door panels and jambs.
The packaging includes 8 wooden pieces (1000*20 mm each) to be
applied on the front systems.
9.7
17
BRACKeT / CLAMp - STAndS fOR ALL GLASS dOORS
Fastening systems to be applied to all glass doors.
Bracket
Standard with Eclisse all glass doors
� Max door panel weight 80 kg
� Dimensions: L 100 x H35 x thickness 26 mm
� Glass thickness 10 mm
N.B.: for the installation two “dovetail”
incisions are required
VITRO - AdApTeR fOR ALL-GLASS dOORS SYnTeSIS ® LIne
Adapter for all-glass doors with stainless steel veil (picture 1),
accessories for stop jamb and brush holder in aluminum coated
with paintable PVC (picture 2).
Available:
� With brackets (veil height H=57 mm)
� With clamps (veil height H=63 mm)
Picture 1
Clamp
� Max door panel weight 100 kg
� Dimensions: L 145 x H 45 x Thickness 27 mm
� Glass thickness 8 or 10 mm
� Available in rough finish, chrome matt
N.B.: it is applied directly on the glass
without any previous processing.
Picture 2
� For Double doors model it’s required the purchase of two Vitro
� Vitro is feasible only with all-glass door panel with max thickness 10 mm.
Applications in glass fusing are not allowed.
www.eclisseworld.com
27