Sliding Pocket Door Systems - Eclisse

THe eCLISSe AdVAnTAGe STUD WALL
...easy assembly
The frame has been purposely designed to
be assembled very quickly and simply by
unskilled staff with just a screwdriver.
KIT ASSEMBLED
Packaging for stud wall
sliding door systems:
140 x 2310 x 110 mm
for the kit.
Starting from 640x2260x110 mm
for the assembled version.
1
2
3
4
5
6
VErSATILITy (for stud wall only)
The kit frame is extremely compact to store, taking up
no more than 1 mt 2 . for 50 units! One kit can fit a
finished wall thickness of 100mm and 125mm without
any further parts.
When specified the kit frame can be supplied fully
assembled for both single and double doors.
7
8
1
2
3
4
5
6
7
8
ExTrACTABLE TrACK SySTEM (Patented)
The Eclisse system has a patented extractable track which allows you to remove the complete
running track at any time without having to break the wall.
HOrIzONTAL rEINfOrCEd BArS
Specially formed from 0.7 mm galvanised steel, these bars have a dovetail form which greatly
increases the strength and reduces flex.
VErTICAL rEINfOrCEd BArS
Eclisse verticals are specially formed from 1.2 mm galvanised steel which greatly increases the
strength and reduces flex.
These are the strongest of their type on the market.
dOOr gUIdE
Quick and easy to fit to the frame with no holes to drill, this guide cleverly guarantees a perfectly
centred position.
METAL TrACK HOLdEr
This is better than wooden supports as it gives much more added strenght to the assembly.
MAINTENANCE frEE TrACK ANd rUNNErS
Four sealed, chrome steel ball bearings in an enclosed track so they cannot derail and give a
smooth and reliable action; 80 kg max door weight, 120 kg on request.
TWO AdjUSTABLE dOOr STOPS
The first doorstop is factory set to stop the door 70 mm from the edge of the pocket, the second is
designed to lightly hold the door in the closed position to prevent bounce back.
METAL STOP jAMB
It reinforces the structure
It comes with models UNICO, NOVANTA and UNILATErAL.
8 9
www.eclisseworld.com