Spray drying at pilot scale - RCPE

More documents

Recommendations

Info

Conclusion - Outlook � Surface roughness and particle size could be successfully affected by the variation of spray drying process parameters � Outlet temperature was found to be an appropriate parameter to adujust surface roughness � To study the influence of surface roughness on the respirable fraction of the active � To understand the crystallization processes of particles of different surface structure S`PRAY2010, Heidelberg 3.-5.5.2010 - Seite 18
Acknowledgement �� DFG – SPP 1423 � Axel Mescher and Prof. Dr. Peter Walzel, Mechanical Process Engineering, Technical University Dortmund � Hartmuth Schröttner, Austrian Centre for Electron Microscopy and Nanoanalysis, Graz University of Technology � Prof. Dr. Nora Anne Urbanetz, Research Center Pharmaceutical Engineering, Graz University of Technology SPRAY 2010, Heidelberg 3.-5.5.2010 - Seite 19
Page 1 and 2: Surface modification of dry powder
Page 3 and 4: Introduction rubber cast of human l
Page 5 and 6: Spray drying at pilot scale � Spr
Page 7 and 8: Spray drying at pilot scale -statis
Page 9 and 10: Spray drying at pilot scale -charac
Page 11 and 12: Spray drying at pilot scale -result
Page 17: Spray drying at pilot scale -result
Page 21 and 22: Ordered mixtures � Turbula® T2C
Page 23 and 24: Interactive mixtures -80 °C- SPRAY

Spray drying at pilot scale - RCPE

Create successful ePaper yourself

Delete template?

Save as template?