Demag DC-Pro chain hoist Demag DCM-Pro Manulift - Poduri rulante

Improved safety and reliability
Motor
Driving
Braking
Chain drive
Slipping clutch
Gearbox
Brake
Speed
detection
Thanks to the completely new safety concept developed
for the Demag DC-Pro chain hoist, the gearbox, brake
and coupling operate without the need for any maintenance
for up to ten years (brake for sizes DC 10 – 25
up to 5 years). The brake-coupling system ensures that
the load is held securely in any operating situation. The
load cannot drop. This is achieved by arrangement of the
brake direct in the power drive chain (red line). Thanks to
minimum wear, the brake does not need to be adjusted.
Operating safety is generally improved by the single-fall
design up to a load capacity of 1000 kg.
39600-3
The combination of electronic control system and
integrated speed sensors continuously monitor the hoist
motor, clutch and brake, thus ensuring lasting safety for
the operator. The compact and light 24 V contactor control
system also ensures that the system is subject to only minimum
wear. The run-on path is both smooth and gentle.
The standard control system includes
■ 24 V contactor control
■ Operating limit switches (upper/lower) to switch the
hoist motion off in the highest and lowest hook
positions – sizes DC 16 and 25 with geared limit switch
with four contacts for for fast-to-slow and limit cut-off
■ Elapsed operating time counter can be read
from the outside
■ Speed detection
■ Infrared diagnostics interface
7