WORKWEAR - JBS Group

WORKWEAR

WORKWEAR 


2 

EuROpEAN stANdARds fOR pROtECtivE ClOthiNg 

Technical clothing of protection is adapted to many occupational hazards : diving- suits, jackets, 

trousers, combinations, overalls, waistcoats and parkas against the chemical products, fire, heat, 

cold, and hornets, for high-visibility and forest work. This clothing is governed by specific 

European standards. Below is a summarized presentation of each standard. 

• EN 533 : Index of resistance of outside shell (from 1 to 3) 

• EN 469 : Protective clothing for firemen 

• EN 443 : Helmets for firemen prEN433 

• EN 369 : Chemical protective clothing : Permeation by liquids 

• EN 465 : Garments for chemical protection 

• EN 466 : Chemical protective clothing : Connections tight with the liquids (type 3) 

• EN 467 : Clothing protective against the chemicals liquidate 

• pr EN943-1 : Clothing protective against the liquid chemicals products and gas 

• pr EN13034 : Requirements for the combinations of protection against the liquid chemicals. 

• EN 368 : Penetration resistance of clothing by aerosols and fine particles. Equipment of the 

type 5. 

• EN 468 : Chemical protective clothing : penetration by spray 

• EN 531 : Protective clothing for the workers of industry exposed to heat. 

• EN 470 - 1 : Protective clothing for use in welding 

• EN 381 - 5 : Protective clothing for users of hand-held chainsaws. 

• pr EN381 - 11 : Protective clothing for users of chain saws held with the hand (jackets). 

EN533 : iNdEx Of REsistANCE Of OutsidE shEll 

(fROm 1 tO 3) 

The present European standard specifies the requirements of performances for materials and material assemblies to the 

propagation of limited flame used in protective clothing. The performance is expressed by an index of propagation of flame 

limited before and after cleaning: 

• Index 1 : Materials not producing any propagation of the flame but forming a hole in contact with a flame. 

• Index 2 : Materials not producing any propagation of the flame and not forming any hole in contact with a flame. 

• Index 3 : Materials not producing any propagation of the flame and not forming any hole in contact with a flame. 

Presenting only one limited persistent flame. 

EN469 : pROtECtivE ClOthiNg fOR fiREmEN 

This standard specifies the testing methods and the minimal requirements necessary of clothing having to be carried within 

the framework of interventions for the fire control in urban environment and of associated activities, in zones presenting a 

risk of heat and or flame. 

It treats general design of clothing, levels of minimal performance of materials used and testing methods to determine those. 

The levels of necessary performance can be reached by the use of only one or several articles of clothing. 

EN369 : ChEmiCAl pROtECtivE ClOthiNg : pERmEAtiON by 

liquids 

This European standard describes a laboratory test method that enables an assesment to be made of the resistance to 

permeation by liquids afforded by clothing materials. 

EN465 : gARmENts fOR ChEmiCAl pROtECtiON 

Relative to performance requirements for chemical protection garments with fogs tight points between the different parts of 

the garment. 

EN466 : ChEmiCAl pROtECtivE ClOthiNg: CONNECtiONs 

tight With thE liquids (typE 3). 

The present European standard specifies the minimal requirements requested from chemical protective clothing tight with 

the liquids, equipped with connections tight with the liquids between the various parts of clothing, like with the gloves and 

the boots intended to protect their carrier against the liquid chemicals. 

EN467 : ClOthiNg pROtECtivE AgAiNst thE ChEmiCAls 

liquidAtE 

The present standard specifies the minimal requirements requested from the articles of clothing offering a protection against 

the chemicals liquidate with certain parts if the body, for example the aprons, the handles and the hoods. It specifies the 

requirements of performance for materials constitutive of protective clothing but not for complete chemical protective 

clothing, each article of individual clothing which can be carried with other articles. 

This standard specifies the minimal requirements for the broken down and non-ventilated combinations of chemical 

protection "tight with gas" (standard 1) and "nontight with gases" (standard 2) including components such as the eyepieces 

and apparatuses of respiratory protection (APR), gloves and boots which can be specified in other standards.

pR EN13034 : REquiREmENts fOR thE COmbiNAtiONs Of pROtECtiON AgAiNst thE liquid 

ChEmiCAls. 

This European standard specifies the requirements minimal for the combinations of chemical protection of limited use and reusable (type 6). It also specifies the minimal requirements for the 

connections between the various parts of clothing by the use of a fog test reduced for the complete combination which constitutes a variation of standard EN468:1994. Both principal test of 

the pr13034 are the tests to standards EN368 (fabric) and standard EN468 (clothing). Standard EN368 sufficient step to certify this clothing. This clothing offers a limited protection against the 

exposure to the liquid aerosols, the fog and the light splashes where the type of potential exposure, fog, mist...is defined. 

EN368 : pENEtRAtiON REsistANCE Of ClOthiNg by AEROsOls ANd fiNE pARtiClEs. 

EquipmENt Of thE typE 5. 

Measure penetration (passage of a chemical product through the holes or the essential openings in a material) and the repulsion (aptitude of a material to evacuate liquid applied to surface. 

EN468 : ChEmiCAl pROtECtivE ClOthiNg : pENEtRAtiON by spRAy 

This European standard specifies a method making it possible to determine the resistance of clothing protective chemical the penetration by fogs of chemicals liquid. 


EN531 : pROtECtivE ClOthiNg fOR thE WORKERs Of iNdustRy ExpOsEd tO hEAt. 

This European standard specifies the requirements of performances and the testing methods for materials used in clothing and gives recommendations concerning the shape of clothing so 

necessary. This standard is applicable to protective clothing for the workers of industry exposed to heat. Clothing is composed of articles of clothing of tops made up of flexible materials 

intended to protect from the specific parts of the body. The hoods and the gaiters are included but all the other type of protection of the head, the hands and the feet are excluded. 

Protective clothing respecting the requirements of this European standard aims at protecting the workers from industry against the brief contacts with a flame and against at least a type of 

heat. Heat can be presented in the form of convective heat, of radiant heat, significant projections of molten metals or a combination of these risks of heat. 

EN470-1 : pROtECtivE ClOthiNg fOR usE iN WEldiNg 

Standard EN470-1 specifies the testing methods and the general requirements of performances of protective clothing intended for the operators of welding and related techniques 

presenting of the comparable risks. This type of protective clothing has an aim to protect that which carries it against small metal projections in fushion, the contact of short duration with 

a flame, like against the ultraviolet radiations. It is intended to be carried, at ambient temperature, in a continuous way up to 8 h. Of the additional requirements which apply to certain 

specific types of operations of welding will be treated in other parts of this European standard. 

EN381-5 : pROtECtivE ClOthiNg fOR usERs Of hANd-hEld ChAiNsAWs 

This present belongs to a series concerning the equipment individual protection intended to protect from the risks which had with the use of chainsaws held with the hand. No protection 

equipment can ensure 100% of protection against the cuts due to chain saw held with the hand. Nevertheless, the experiment showed that it is possible to manufacture protective 

equipment which offers a certain degree of protection. 

pR EN381 - 11 : pROtECtivE ClOthiNg fOR usERs Of ChAiN sAWs hEld With thE hANd (jACKEts). 

This present standard belongs to a series concerning th equipment individual protection intended to protect from the risks which had with the use of chain saws held with the hand. No 

protection equipment can ensure 100% of protection against the cuts due to a chainsaw held with the hand. Nevertheless, the experiment showed that it is possible to manufacture 

protective equipment which offers a certain degree of protection. 

• EN340 : General requirements 

• EN342 : Protective garment against cold 

• EN343 : Protective garment against atmospheric exposures. 

EN340 : gENERAl REquiREmENts 

This standard contains general requirements of protective garments, defined as recovering or replacing the personal garment and designed to protect againstone or several dangers. 

mARKiNg 

• On the product itself or printed on a label fastened to the product. 

• Set to be visible and legible. 

• Name, commercial brand. 

• Designation of the type of product. 

• Designation of the size. 

• Number of the appropriate standard. 

• Pictograms and, if necessary, performance levels. 

• The "i" marked on a pictogram indicates the need for the user to refer to manufacturer instructions. 

• Maintenance labelling. 

• Instructions for use. 

EN342 : pROtECtivE gARmENt AgAiNst COld. 

The EN342 standard specifies the requirements and performances test methods of the protective garments against cold at temperatures inferior to -5 degrees. Basic thermal insulation 

measured. Function value of the maximal temperature off use for an activity level and an exposure time given. The letter gives the type of undergarments used for the test (A or B). 

Class of permeability to air (0 to 3) It is the garment tightness level. 

Class of steaming resistance (0 to 3) It is the garment breathability level. 

EN343 : pROtECtivE gARmENt AgAiNst AtmOsphERiC ExpOsuREs 

Resistance to penetration of water (0 to 3) It is the garment waterproofness level 

steaming resistance (0 to 3) It is the garment breathability level. 

Application field : 

The present standard specifies the protective garments characteristics against the influence of atmospheric exposures, wind and cold above -5 degrees. The first number on the right of the 

pictogram indicates the class of resistance to the water penetration, the second one the class of the steaming resistance. 


3



4 

mERu shORt slEEvE 

ClAssiC shiRt 

65% Polyester 35% Cotton. 

Chest pocket Button cuffs. 

Sizes 14/14.5/15/15.5/16/16.5/17/ 

17.5 /18/18.5/19/20/21/22 

Product Codes: PSR02PC - White 

PSR04PC - Blue 

NAZER lONg slEEvE 

ClAssiC shiRt 

65% Polyester 35% Cotton. 

Chest pocket Button cuffs. 

Sizes 14/14.5/15/15.5/16/16.5/17/17.5/18/18.5/19/20/21/22 

Product Codes: PSR07PC - White 

PSR06PC - Blue 

pilOt shiRt 

65% Polyester 35% cotton. Quality in both design and manufacture. 

Generous sizing for comfort in wear. 

Product Codes: PSR01PC - Pale Blue - Long Sleeve 

PSR38PC - White - Long Sleeve 

PSR03PC - Pale Blue - Short Sleeve 

PSR39PC - White - Short Sleeve

ultAR pOlO shiRt 240g 

Polo shirt, 65% polyester, 35% cotton pique fabric. Taped neck for 

extra comfort. Raised detail on collar and cuffs, three button placket. 

Product Codes: PPS02PC - Navy 

PPS09PC - White 

PPS44PC - Black 

PPS63PC - Red 

PPS04PC - Green 

PPS11PC - Royal Blue 

shispAR pOlO shiRt 

180gsm 50% Polyester, 50% Cotton. 

3 button plackett. 

Sizes XS / S / M / L / XL / 2XL / 3XL / 4XL / 5XL 

Product Codes: PPS117PC - Navy 

PPS126PC - Royal Blue 

PPS132PC - Black 

sEmERu lAdiEs pOlO shiRt 

200gsm 50% Polyester 50% Cotton. 

Raised rib collar and sleeve trim. 

3 button placket. 

Sizes XS / S / M / L / XL / 2XL 

Product Code: PPS118PC - Navy 

(Also available in Black and Red) 


diCKiEs shORt slEEvE pOlO 

A high quality polo shirt for longer life. The heavy duty polycotton 

fabric is Teflon coated for easier cleaning and better colour retention. 

Reinforced stress points give the garment its superior strength. 

Product Codes: DPS02DK - Burgundy DPS01DK - Navy 

DPS03DK - Black DPS04DK - Green 

DPS05DK - Royal Blue DPS08DK - White 

DPS09DK - Red 18L002105GR - Grey 


5



6 

AtiliAN lAdiEs sWEAt shiRt 


Drop shoulder design. 

Knitted collar, cuffs and waist. 


Product Code: PSS34PC - Navy 

(Also available in Black) 

lAsCAR sWEAt shiRt 



Knitted collar, cuffs and waistband. 


COLOURS: Black, Navy 

ElbRus sWEAt shiRt 



Knitted collar, cuffs & waistband. 


Product Codes: PSS01PC - Navy PSS03PC - Black 

PSS06PC - Royal Blue PSS07PC - Burgandy 

PSS08PC - Green 

ChEstER bOdy WARmER 

Parallel Quilted Lightweight Nylon. 

Extended back panel for extra warmth. 

Patch pockets. Quilted Outer. 

Sizes S / M / L / XL / 2XL 

Product Code: PBW05PC - Navy

mORAdO bOdy WARmER 

65% Polyester 35% Cotton. Multi-pocket. 

Zip and stud fastening. Quilt lined. 

Mandarin style collar. 

Sizes S / M / L / XL / 2XL / 3XL / 4XL 

Product Codes: PBW23PC - Navy 

PBW28PC - Black 

tRiKORA bOdy WARmER 

65% Polyester 35% Cotton. Quilt lined. 

Multi-pocket. Mandarin style collar. 

Zip and stud fastening. 


Product Codes: PBW01PC - Navy 

PBW11PC - Black 

thOR iii flEECE 

The Thor III is Regatta's most popular 

interactive fleece jacket in 280 series 

anti-pill symmetry fleece with fleece 

cuffs, adjustable shockcord hem, 

2 zipped lower pockets, interactive, 

YKK zip. 

Product Codes: DFL07RG - Navy 

PFL33PC - Black 

DFL09RG - Green 



7


8 

fliNt mENs sOft shEll 

2 layer construction 260gsm. 2 zip side pockets. 

Full length zip fastening. 

Sizes XS / S / M / L / XL / 2XL / 3XL / 4XL 

Product Codes: PFL48PC - Navy 


PFL62PC - Grey 

(Also available in Green and Red) 

jAditE mENs gilEt 

2 layer soft shell construction 260gsm. 

Full length zip fastening. Contrast trim. 

2 hip and chest zip pockets. 




PFL59PC - Grey 


slAtE mENs sOft shEll 

2 layer construction 260gsm. Contrast trim. 

2 zip side pockets. 



Product Code: PFL60PC - Navy 


jEt lAdiEs gilEt 

2 layer construction 260gsm. 

Contrast trim. 

2 hip zip pockets. 



COLOURS: Black, Navy, Red

AmEthyst lAdiEs ExECutivE sOft 

shEll 

3 layer construction 290gsm. Contrast trim. 

10000/3000 breathable waterproof membrane. 

Zip pockets to sleeve, chest and hip. 


COLOURS: Navy, Black, Red 

lEONE lAdiEs flEECE 

300gsm Antipil fleece. 

Comfort cuffs. 

Full zip closure. 

2 hip pockets with zip closure. 




AmbER lAdiEs sOft shEll 

2 layer construction 260gsm. 

2 zip side pockets. 





(Also available in Grey, Green & Red) 

bAtuRA flEECE 

300gsm Antipil fleece. Full zip closure. 

Comfort cuffs. 

Interactive zip. 

2 hip pockets with zip closure. 






9


fOx200 jACKEt 

44% Polyester 6% Spandex, 50% Polyamide coating. 100% fleece 

lining. Adjustable and detachable hood. 3 Outside pockets, 2 inside 

pocket. Sleeves with velcro adjustments. Elasticated adjustments at 

waist. Zip cover at the neck. 

Sizes XXS / XS / S / M / L / XL / 2XL / 3XL 

Product Code: PJK201PC - Black with orange zippers 

(Also available in Black & Green) 


10 

fOx100 jACKEt 

44% Polyester 6% Spandex, 50% Polyamide coating. 100% fleece 

lining. 2 Outside pockets, 1 inside pocket. Sleeves with velcro 

adjustments. Elasticated adjustments at waist. Zip cover at the neck. 

Sizes S / M / L / XL / 2XL / 3XL 

Product Code: PJK200PC - Black/Red 

(Also available in Grey/Black, Navy, Black) 

6641 47 flEECE jACKEt 

100% Polyester fleece, 270gsm. 3 layer bonded with PU membrane, 

windproof and breathable. Detachable sleeves. Fabric patches at 

shoulders, elbows and zip areas. Mobile phone pocket. Chest pocket 

with zip and draw cords at the bottom of the jacket. Extended length 

at the back of the jacket. 

Sizes XS / S / M / L / XL / 2XL / 3XL 

Product Code: BFL09PC - Navy 

(Also available in Grey & Black)

7OZ stud fRONt pOlyCOttON bOilERsuit 

Concealed front stud fastening, two studded top, 

two slant side, side rule and one rear patch pockets 

plus side entrance openings. Hammer loop. 

Elasticated back. 

Sizes: 36"-56" 

Product Codes: PBS02PC - Navy DBS23PC - White 

PBS11PC - Green PBS16PC - Orange 

PBS08PC - Royal Blue PBS13PC - Black 

WAREhOusE COAt 

Warehouse Coat. Concealed stud front fastening. 

One breast pocket and two side pockets. 

Sizes: 36 - 56 

Product Codes: PWCOl PC - White 

PWC09PC - Navy 

PWC03PC - Royal Blue 

Zip fRONt COvERAll 

245gsm polycotton. 

Zip fastening over flap. 

2 slanted zip breast pockets. 

Sizes 36 - 56 Regular Leg 

Product Codes: PBS54PC - Black 

PBS03PC - Navy 



11



12 

Zip fRONt jACKEt 

245gsm polycotton. 2 hip pockets. 

2 breast pockets. Adjustable cuffs. 

Zip fastening. 


Product Code: PJK03PC - Navy 

tAbARd 


Bound edges. 

Central pocket. 

Sizes S / M / L / XL / 2XL 

Product Codes: PAP04CF - Navy PAP17CF - White 

PTB01PC - Royal Blue PAP17PC - Red 

DTA08PC - Green PAP16PC - Maroon

hEAvy WEight 

COmbAt tROusERs 


Regular and Tall fit. 

Knee pad pockets. 

Leg and hip pockets. 

Zip fly with button fastening. 

Sizes 28 / 30 / 32 / 34 /36 / 38 / 40 / 42 / 44 / 

46 / 48 / 50 

Product Codes: PTR188PC - Navy 

PTR189PC - Black 

PTR114PC - Green 

COmbAt tROusERs 



2 hip swing pockets. 

2 leg pockets. 


Sizes 28 / 30 / 32 / 34 /36 / 38 / 40 / 42 / 44 / 46 / 48 / 50 



tROusERs 



Sewn in crease. 


Sizes 28 / 30 / 32 / 34 /36 / 38 / 40 / 42 / 44 / 46 / 48 / 50 





13



14 

lAdiEs COmbAt 

tROusERs 


Ladies fit. 

Zip fly with button. 

Leg & hip pockets. 

Reg and Tall fit. 

Sizes 8 / 10 / 12 / 14 / 16 / 18 / 

20 / 22 / 24 / 26 / 28 

Product Code: 

PTR191PC - Navy 


lAdiEs 

tROusERs 



Ladies fit. 

Zip fly with button. 

Sizes 8 / 10 / 12 / 14 / 16 / 18 / 

20 / 22 / 24 / 26 / 28 

Product Code: 


(Also available in Navy)

REDHAWK ZIP FRONT 

COVERALL 

Two way metal zip front with studded over 

placket. 

Two zipped chest pockets. 

Tool pocket and rule pocket. 

Two swing pockets with side access. 

Double pencil pocket on sleeve. 

Full back elastication and an action back. 

Two large back patch pockets, one zipped. 

Knee pad pouches. 

Fabric 65% polyester, 35% cotton, 260gsm. 

Sizes Leg R 30”, T 32” Chest 36” – 54” (All 

colours), R – chest 36” – 58” (Navy only), 

T – chest 36” – 60” (Navy and Royal only) 

Product Codes: DBS15DK - Black 

DBS17DK - Grey 

DBS18DK - Lincoln 

DBS20DK - Orange 

PBS57PC - Navy 

PBS60PC - Royal 

PBS68PC - Red 

REDHAWK ECONOMY STUD 

FRONT COVERALL 

Concealed stud front. 

Two swing pockets with side access. 

Pen pocket on sleeve. 

Two chest pockets with studded flaps. 

One back patch pocket. 

One rule pocket. 

Full back elasticated waistband. 

Fabric 65% polyester, 35% cotton, 200gsm. 

Sizes Leg R 30", T 32", S, M, L, XL, XXL 

Product Codes: 13S001752G - Green 

DBS23DK - White 

DBS28DK - Navy 

DBS32DK - Royal 

DBS36DK - Orange 



15



16 

REDHAWK SUPER WORK 

TROUSERS 

Great value work trousers with triple- stitched 

seams for extra strength. 

Features include: 

Cargo-style pocket, a hammer loop. 

External knee pad pouches for cushioned knee 

pads. 

Key fob on waistband. 

Button and YKK zip fastening. 

Rule pocket on left leg. 

Durable triple stitch seam detailing. 

Two front and two rear pockets. 

Available in three different leg lengths from size 

30" to 48" waist 


PTR90PCL - Navy Long 


PTR130PCL - Black Long 

EISENHOWER 

MULTI-POCKET TROUSER 

Zip fastened with metal button waistband 

attachment. 

Velcro adjustment on waist. 

Cordura external knee pad pouches and cordura 

hem. 

Multi-pocket detailing with tool pouches. 

Cargo pocket with multi-sections and stud 

fastened flap. 

Two back patch pockets, one with stud 

fastened flap. 

Hammer loop. 

Fabric: 65% polyester, 35% cotton canvas 

Sizes: Leg R 31", T 33" Waist 30" - 44" 


PTR135PC - Black

6646 48 SOFTSHELL JACKET F1RSTGRADE 

Quality: Bonded softshell 92% polyester / 8% spandex with fleece on 

the inside. Wind, waterproof and breathable. 

Size: XS-XXXL Color: 07 black 

Softshell jacket with fresh F1RSTGRADE-details in wind, waterproof 

and breathable fabric. Detachable sleeves with reinforced patches on 

elbows and zip pocket. Reflective piping on front and back. Water proof 

zips in chest, sleeve and front pockets. Mobile phone pocket. Draw 

cords at the bottom of the jacket and collar. Removable key ring holder. 

Product Code: BFL13PC - Black 

3942 50 JACKET CONTRAST PLUS 

Quality: 65% polyester / 35% cotton, comfort finish, 300 g/m² 

Size: XS-4XL 

Triple stitched seams for ultimate strength. Concealed brass front zip. 

Chest pockets with flaps and button closing. D-ring. Mobile phone 

pocket on right chest. Large side pockets. Pencil pocket on the left 

sleeve. Inside pockets. Adjustable cuffs and waistband. Actionback for 

free movement. Extended back. 

Product Codes: BJK15PC - Black/Grey BJK22PC - Anthracite / Red 

BJK25PC - Royal / Navy 

(Also available in Khaki/Anthracite, Dark Green/Black and Grey/Black) 


7730 15 JACKET CRAFTSMEN PRO 

Quality: 100% cotton-twill, 350 g/m² Size: XS-XXXL 

Color: 07 black, 32 dark navy 

Designed jacket with contrast stitching and reflective pipings. Hidden 

zipper at front. Mobile pocket at right chest. Tool and pencil pocket at 

left chest. Roomy side pockets. Double inside pockets. Adjustable 

waist with pockets. Velcro buttoning at sleeve endings. Extended 

back. Key ring holder. Can be lined with fleece lining art. 9028 51 06. 

Pre-Washed 

Product Code: BJK66PC - Black 

FOX100 SOFT SHELL JACKET 

EN342, EN343 Quality: 94% Polyester, 6% spandex. Lining: Polar Fleece 

Size: S-XXXL 

Color: 07 black, 06/07 grey/black, 07/02 black/red, 03 navy 

Soft shell jacket, wind and waterproof. Breathable. Taped seams. 

Zipper at front with Velcro-adjustable cuff. 2 outside pockets, 

2 inside pockets. Armpit ventilation, with zipper. 

Adjustable elastic cord at the bottom at right leg. 

Hammer loop. 

Product Code: PJK203PC - Black 


17


6641 47 flEECE jACKEt 

Quality: 100% polyester fleece. 270g/m². 3 layer bonded with PU 

membrane, windproof and breathable. 

Size: XS-XXXL 

3 layer bonded fleece with PU membrane. Detachable sleeves. Fabric 

patches at shoulders, elbows and zip area’s. Mobile phone pocket. 

Chest pocket with zip and draw cords at the bottom of the jacket. 

Extended length at the back of the jacket. 

Product Code: BFL09PC - Navy 

(Also available in Grey and Black) 


18 

7330 

14 CRAftsmAN 

tROusERs 

pREmium 

hEAvy COttON 

Quality: 100% cotton-twill, 

350 g/m² 

Size: 28"-50"R, 30"-40"T, 

34"-48"S 

Tool pockets. Large front 

pockets fitted with nail 

pockets. Hip pockets. 

Double cargo pockets with 

mobile phone pocket. 

Ruler pocket with Cordura® 

lining. Knee pad pockets. 

Tool holder belt loops. 

Product Code: 

BTR34PC Black 

(Also available in 

Navy/Blue and 

Khaki/Anthracite) 

6520 30 pilOt jACKEt CONtRAst plus 

Quality: 50% nylon / 50% cotton, 245 g/m², water resistant 

Size: XS-4XL 

Outer fabric wind and water resistant with extra strong material on the 

shoulder area. Detachable sleeves. Chest pockets with flaps, key holder 

ring and pencil pocket. Mobile phone pocket with zip. Inside pocket. 

Front pockets. Sleeve pocket with zip. Knitted sleeve and waist cuffs. 

Product Codes: BJK01PC - Black 

BJK02PC - Navy 

(Also available in Blue/Navy, Red/Black and Dark Green/Black) 

7020 

50 CRAftsmAN 

tROusERs 

Quality: 65% polyester / 

35% cotton, comfort finish, 

300 g/m² 

Size: 28"-50"R, 30"-40"T, 

34"-48"S 

Functional craftsman's 

trousers with triple stitched 

seams for strength. Nail 

and knee pad pockets 

strengthened with Oxford 

nylon. Roomy front 

pockets. Two hip pockets. 

Double cargo pocket with 

zip. Ruler pocket and 

mobile phone pocket. Tool 

holder belt loops. 

Product Code: 

BTR50PC - Navy 

(Also available in 

Black)

2100 40 

tROusERs 

COmfORt 


35% cotton, 245 g/m² 

Size: 28"-50"R, 30"-40"T, 

34"-48"S 

Side pockets with extra 

strong lining. D-ring. Hip 

pockets, one with flap. 

Double ruler pocket. 

Cargo pocket and mobile 

phone pocket. 

Product Codes: 

BTR04PC - Grey 

BTR14PC - Black 


BTR30PC - Red 

(Also available in Royal 

Blue and White) 

2920 50 

tROusERs 


35% cotton, comfort 

finish, 300 g/m² 

Size: 28"-50"R, 30"-40"T, 

34"-48"S 

Triple stitched for ultimate 

strength. Side pockets 

with extra strong lining. 

Hip pockets, one with flap. 


Cargo pocket with mobile 

phone and pen pocket. 

Product Codes: 


BTR22PC - Black 

BTR26PC - Green 

BTR32PC - Royal 

(Also available in Red) 


2921 50 

tROusERs 


35% cotton, comfort finish, 

300 g/m² 

Size: 28"-50"R, 30"-40"T, 

34"-48"S 


strength. Side pockets 

with extra strong lining. 

Hip pockets, one with flap. 


Cargo pocket with mobile 

phone and pen pocket. 

Knee pad pockets with 

height adjustments. 

Product Code: 

BTR23PC Navy 

2941 50 

tROusERs 

With KNEE 

pOCKEts 


35% cotton, comfort 

finish, 300 g/m² 

Size: 28"-50"R, 30"-40"T, 

34"-48"S 


strength. Roomy side 

pockets with extra strong 

lining. Hip pockets, one 

with flap. Double ruler 

pocket. Cargo pocket with 

separate pen and mobile 

phone pocket. Knee pad 

pockets with height 

adjustment. 

Product Code: 

BTR49PC 

Green/Black 


19



20 

bAsE lAyER 

TENCEL® is an all-natural fi bre. Its controlled 

nano-fi bril structure moves moisture away 

from the body, keeping you cool when the 

temperature is hot and warm when it is cold. 

bamboo fibre: Natural anti-bacterial, Antiultraviolet, 

Rich softness, 

Wicking and comfortable 

bAsE lAyER vEst 

Breathable and extremely soft, the base layer 

vest has eco-friendly fibres incorporated in the 

structure of the fabric. 

* Long sleeve vest 

* Crew neck 

* Ribbed cuffs 

* Contrast stitching 

Fabric 65% bamboo, 30% Tencel, 5% spandex, 

180gsm 

Sizes M, L, XL, XXL 

Colour Black 

Product Code: PVT01PC 

bAsE lAyER lONg jOhNs 

A modern variation of a traditional 

undergarment, employing the latest fabric 

technology. 

* Elasticated waist and ribbed ankles 

* Vented fl y 

* Contrast stitching 

Fabric 65% bamboo, 30% Tencel, 5% spandex, 

180gsm 

Sizes M, L, XL, XXL 

Colour Black 

Product Code: PTR01PC

WORKWEAR - JBS Group

Create successful ePaper yourself

Delete template?

Save as template?