GENERAL CATALOGUE - Rogi Trading Holland

WM360
GEAr HEAd LATHE
Model No. WM360
Specifications
Distance between centres 1000mm
Swing over bed 356mm
Swing over gap 506mm
Bed width 206mm
Taper of spindle bore MT5
Spindle nose D1-4
Spindle bore 38mm
Step of spindle speeds 16
Range of spindle speeds 45-1800rpm
Range of cross feeds 0.015-0.220mm/r
Range of longitudinal feeds 0.043-0.653mm/r
Range of inch threads 4-56tpi
Range of metric threads 0.4-7mm
Top slide travel 92mm
Cross slide travel 185mm
Carriage travel 945mm
Tailstock quill travel 120mm
Taper of tailstock quill MT3
Main motor power 400V, 2.2kW
Packing size 1920x760x1450mm
Net weight 800kg
• Hardened and ground gears to headstock and gearbox ensure long term
•
•
•
•
reliable performance and extremely quiet operation
Precision ground D1-4 spindle supported on taper roller
bearings
Induction hardened and ground vee bed. Deep, wide casting
Removable gap bed for maximum capacity. Dowelled for
accurate relocation
Foot operated spindle brake, extremely effective, will
immediately brake lathe from highest speed of 2000rpm. In
an emergency situation, the brake will also disconnect
•
•
•
•
•
•
•
•
•
•
the electrical drive.
Safe low voltage controls with
overload cut out
Slide out coolant/chip tray
Accuracy test report
European electrical components,
Siemens or Telemechanique
Emergency electric cut out switch
Jogging button to assist chuck rotation
throughout the speed range
Offset tailstock facility
Independent feed shaft to saddle
for longitudinal and cross feed
Adjustable gibs to top slide and
cross slide
Interlock chuck guard and gear
train cover
Standard Accessories
4-jaw chuck & backplate
Face plate
Steady/Follow rest
Heavy duty stand
Toolbox & tools
Halogen work lamp
Micro carriage stop
Coolant system
Foot brake
Leadscrew cover
Optional Accessories
Quick change tool post
Turning tools
Taper turning attachment
Digital readout
Collet attachment
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hardened and ground gears to headstock and
gearbox ensure long term reliable performance
and extremely quiet operation
Precision ground D1-4 spindle supported on
taper roller bearings
Induction hardened and ground vee bed. Deep,
wide casting
Removable gap bed for maximum capacity.
Dowelled for accurate relocation
Foot operated spindle brake, extremely
effective, will immediately brake lathe from
highest speed of 2000rpm. In an emergency
situation, the brake will also disconnect the
electrical drive.
Safe low voltage controls with overload
cut out
Slide out coolant/chip tray
Accuracy test report
European electrical components, Siemens
or Telemechanique
Emergency electric cut out switch
Jogging button to assist chuck rotation
throughout the speed range
Offset tailstock facility
Independent feed shaft to saddle for
longitudinal and cross feed
Adjustable gibs to top slide and cross slide
Interlock chuck guard and gear train cover
Standard Accessories
4-jaw chuck & backplate
Face plate
Steady rest
Follow rest
Toolbox & tools
Halogen work lamp
Micro carriage stop
Coolant system
Foot brake
Leadscrew cover
Optional Accessories
Quick change tool post
Turning tools
Taper turning attachment
Digital readout
Collet attachment
WM360A
GEAr HEAd LATHE
Model No. WM360A
Specifications
Distance between centres 1000mm
Swing over bed 356mm
Swing over gap 506mm
Swing over cross slide 210mm
Bed width 260mm
Taper of spindle bore MT5
Spindle nose D1-4
Spindle bore 40mm
Step of spindle speeds 12
Range of spindle speeds 40-1800rpm
Range of cross feeds 0.024-0.359mm/r
Range of longitudinal feeds 0.043-0.653mm/r
Range of inch threads 4-56tpi
Range of metric threads 0.4-7mm
Top slide travel 92mm
Cross slide travel 185mm
Tailstock quill travel 120mm
Taper of tailstock quill MT3
Main motor power 400V - 2.4kW
Packing size 1990x760x1450mm
Net weight 996kg
TUrNiNG TUrNiNG