GENERAL CATALOGUE - Rogi Trading Holland

WM660
iNdUsTriAL LATHE
Big spindle bore
One piece iron casting base
Low noise & Precision headstock
Model No. WM660
Specifications
Distance between centres 1000 / 1500 / 2000 / 3000mm
Swing over bed 660mm
Swing over carriage 420mm
Swing over gap 870mm
Taper of spindle bore 113mm 1:20
Spindle bore 105mm
Spindle nose D1-8
Step of spindle speeds 12
Range of spindle speeds 36-1600rpm
Range of cross feeds 0.027-1.07mm/r
Range of longitudinal feeds 0.063-2.52mm/r
Range of inch threads/No. 28-2tpi /25
Range of metric threads/No. 1-14mm /22
Range of D.P. threads/No. 4-56D.P./24
Range of moduler threads/No. 0.5-7 / 20mm / 18
Rapid feed of cross traverse 1.9m/min
Rapid feed of longitudinal traverse 4.5m/min
Top slide travel 145mm
Cross slide travel 310mm
Max. size of tool (WxH) 25x25mm
Tailstock quill diameter 75mm
Tailstock quill travel 150mm
Taper of tailstock quill MT5
Motor power 400V - 7.5kW
Packing size (2500 / 3000 / 3500 / 4500)x1100x1650mm
Net weight 2500 / 2700 / 3000 / 3350kg
Direct mounting chuck
Standard Accessories
3-jaw chuck
Face plate
4-jaw chuck
Drive plate
Steady rest
Follow rest
Halogen work lamp
Toolbox & tools
Coolant system
Foot brake
Chuck guard
Leadscrew cover
Rapid feed
Optional Accessories
Digital readout
•
•
•
•
•
The surface of the bedways is supersonic frequency hardened
The spindle bore size is 105mm
There is no need to change gears. Lathe can turn about 89 kinds of metric, Inch, Module and D.P. threads
An automatic stopping device is used to realize automatic stop for machining a certain length workpiece
One piece iron casting base allows heavier cuts
Lubrication system
Halogen work lamp
Coolant pump
Longitudinal & cross rapid feed
Hardened and ground slideways
Hardende and ground
Five position carriage stop
Foot operated spindle brake
TUrNiNG TUrNiNG