Slip Ring Assemblies Program 5100 - Conductix-Wampfler

24
Combination of Slip Ring Assemblies
Enclosed Slip Ring Assembly e.g. Type GS19 /13 /18
Electrical data
• Voltage:
- max. 1000/630 V~= (690V) 1)
- according to DIN VDE 0110
- overtension category III
- insulating material group II / III
- degree of contamination 3
• Ring construction:
150 A + PE / 50 A / 25 A
• Protection class: IP 54
(higher protection class on request)
Drive arm
~ 62
ø 16
ø 300
ø 60
M63x1,5
125
16
21
h
110
ø 320
Holes in the bottom plate:
1x for cable gland M50x1.5
1x for cable gland M25x1.5
1x for cable gland M25x1.5
ø 17
ø 140
ø 175
Mounting fl ange
H
Additional technical specifi cations
• Rotational speed for
- standard type (MS-rings and
Br-brushes): 1-100 min -1
- data (ML-rings and Ag-brushes):
1-30 min -1
• Bearing: anti-friction bearing (sealedfor-lifetime)
• Cable connection:
- Main current rings with strand
wiring on request
- control rings on terminal board
• Protective cover:
- removable vertical-up
- available on request with divided
cover (removable to the side) and/or
side access window
• Corrosion protection:
- steel parts galvanized and/or
powder coated
- stainless steel enclosure on request
• Ambient temperature:
- from -35°C up to max. +50°C
- at > 30°C the max. current load
has to be reduced accordingly
- higher temperatures possible on
request
• Position of installation: vertical
(other positions on request)
Components included
• Standard without glands
• Cable glands on request
Options
• Heater
• Rotary transmission for gases and
liquids (protection class IP 40, higher
protection class on request)
1) The voltages apply for slip ring assemblies,
installed in systems (parts of systems)
that are not directly fed by the low-voltage
net (VDE 0110-1/2008-01: 4.3.2.2.2,
table F.4).
On systems (part of systems) with direct
feeding from the low-voltage net, the
values in brackets are permissible for
alternating current (VDE 0110-1/2008-01:
4.3.2.2.1, table F.3b).
Please contact us with your
specifi c requirements and
we would be happy to design
a customized solution
for your application.