Program 2012 - IPG Automotive

“apply & innovate 2012” – IPG Technology Conference
Program 2012
September 18 – 19, Karlsruhe
Taking you to the next level
International Conference on the Latest Methods And Technologies of Virtual Test Driving

First Day
Morning
Program „apply & innovate 2012“ – IPG Technology Conference First Day – September 18, 2012
Program * – September 18, 2012
Plenary Session
8:45 Welcome
Dr. Alexander Schmidt, Bernhard Schick, IPG
9:00 Key Note: Trends in the Automotive Industry Technologies, Challenges and
Methods of Resolution
Dr. Wolfgang Runge, Runge Consult, former ZF Lenksysteme
9:30 Key Note: Mission „X-in-the-Loop“
Prof. Dr. Dr. h. c. Albert Albers, KIT
10:00 Management of Digital Prototypes at Porsche
Klaus Hassel, Porsche
10:30 Coffee Break and Exhibition
Parallel Sessions
Autonomous Driving & ADAS Emission Evaluation
11:00 Driving Experience Place -
Geometrical Evaluation Meets
Functional Evaluation by Combining
Virtual Reality with
Hardware-in-the-Loop Technologies
Steffen Schmidt, Michael Folie, IPG;
Jan Bodenstein, RTT
11:30 CoCar-The Instrumented Test Vehicle
of the FZI Living Lab Automotive
Dr. Marcus Strand; Tobias Bär,
Prof. Dr. J. Marius Zöllner, FZI
12:00 Lunch and Exhibition
Experimental Investigations of Transient Emissions
Behaviour Using Engine-in-the-Loop
Christian Disch; Dr. Heiko Kubach,
Prof. Dr. Ulrich Spicher, KIT
I did it My Way: A Comprehensive Testing
Solution for the New And Upcoming “In-Use”
Emissions Regulations
Dr. Felix Pfister, Dr. Roland Wanker,
Dr. Johann Wurzenberger, Martin Rzehorska, AVL
ADAS & Integrated Safety Vehicle Dynamics & Controls
13:00 Potential Friction Knowledge Benefits on
ADAS PCS-ACC Systems: Logics,
Performances, Simulated Critical
Scenarios
Federico Mancosu, Pirelli;
Prof. Cheli, Politecnico di Milano;
Elisabetta Leo, Marco Pezzola,
Soluzioni Ingegneria
13:30 Simulation of Real-World Accident
Scenarios of the GIDAS Database
Using CarMaker
Christian Erbsmehl,
Unfallrekonstruktion/Simulation,
Verkehrsunfallforschung TU Dresden
14:00 Maneuver-Based Testing of
Integrated Vehicle Safety Systems
Rudolf Ertlmeier, Kathrin Sattler,
Andreas Raith, Prof. Dr. Thomas Brandmeier,
UAS Ingolstadt;
Daouda Sadou, Continental,
Dr. Christian Schyr, IPG
Extending CarMaker for Multiple Variable
Analysis
James Fleuty, Jaguar Land Rover
Shuttle-Service to Karlsruhe Institute of Technology (KIT) and Tech-Coffee
Microcar Handling Behavior for Both – the
Steady State And Transient Maneuver: Numerical
VS Experimental Comparison for Model
Validation
Marco Pezzola, Elisabetta Leo, N.Taroni,
Soluzioni Ingegneria;
C.C.Cheng, Kymco; L.Paletti Kymco Italia
Real Time Driving Dynamics Simulation in
Heavy Commercial Vehicles
Dr. Jan Fleischhacker, Dr. Philipp Wagner, MAN
1
* subject to change
2
First Day
Afternoon

Program „apply & innovate 2012“ – IPG Technology Conference First Day – September 18, 2012
Technology LIVE Tour at KIT
15:00 Welcome to the Tour
Prof. Dr. Frank Gauterin / Prof. Dr. Dr. h. c. Albert Albers, KIT
Key Note – „Vision 2020 - Mobility Campus“
Prof. Dr. Frank Gauterin, KIT
Live Sessions at „Campus Ost“
X-in-the-Loop Tour * Driving Action Area *
KIT:
Energy Flow Analysis Using Vehicle-in-the-Loop
Chassis Dyno
Heavy Truck Performance Testing Using Vehiclein-the-Loop-Roller
Dyno
Noise Vibration Harshness and Performance
Assessment Using Powertrain-in-the-Loop
Noise Vibration Harshness and Drivability Analysis
Using Vehicle-in-the-Loop-Roller Dyno
Performance And Emission Assessments Using
Engine-in-the-Loop
Shuttle-Service to the Evening Location
19:00 Start of the Evening Event
AVL:
In-Vehicle Emission Measurement
KaRaceIng:
New Formula Student Race Car in Action
FZI:
Autonomous Parking Using Virtual Objects with Cocar
– the Instrumented Test Vehicle of the FZI Living Lab
Automotive
IPG:
Fusion of Real And Virtual Testing Using In-Vehicle-
Simulation Methods
Autonomous Parking Using Virtual Objects with Cocar – the
Instrumented Test Vehicle of the FZI Living Lab Automotive
Heavy Truck Performance Testing Using VIL-Roller Dyno
Energy Flow Analysis Using VIL Chassis Dyno
3
* subject to change
4

Second Day
Morning
Program „apply & innovate 2012“ – IPG Technology Conference Second Day – September 19, 2012
Program * – September 19, 2012
Parallel Sessions
X-in-the-Loop Test Methods Virtual Integration
9:00 Maneuver-Based Validation of BMW
xDrive Variants by Using Virtual Vehicle
Integration And HIL Test Methods
Matthias Prebeck, Dr. Peter Rissling,
BMW ; Michael Folie, IPG
09:30 iTPMS-in-the-Loop Solution for
Extensive Validation Tasks for Indirect
Tire Pressure Monitoring Systems
According to the New ECE-R 64
Regulation
Oliver Blanco Hague, Michelin;
Charles Miquet, IPG
10:00 Virtual Tests to Support Functional
Safety of a Torque Vectored E-Motor
Vehicle
James Waters, Richard Hurdwell,
Lotus Engineering
10:30 Coffee Break and Exhibition
Virtual Driving Test: Co-Simulation of Vehicle
and Driver Behavior to Support Transmission
Development
Michael Matthäi, Christian Petschaelis,
ZF Friedrichshafen
Advanced 3D / 1D Co-Simulation Tool Chain for
the Development of Safe and Efficient
Electrified & Conventional Vehicles
Dr. Stephen Jones, AVL
Potential and Benefits of New „Functional
Mock-up Interface - FMI“ for Virtual Vehicle
Integration
Stephan Ziegler, Johannes Gerl, Stephan Diehl,
Modelon; Dr. Jan Fleischhacker, MAN
X-in-the-Loop Test Methods Vehicle Dynamics & Controls
11:30 Use of CarMaker and Xpack4 to Support
a Multi-Physical Simulation Architecture
for the Development of Hybrid Electric
Vehicles (LCVTP)
James Chapman, Jaguar Land Rover
12:00 Consistent Development of Hybrid
Vehicles at the Engine-in-the-Loop
Testbed
Matthias Kluin, Maximilian Bier,
Prof. Dr. Christian Beidl, TU Darmstadt
12:30 Lunch and Exhibition
How DoE Makes Vehicle Dynamics Simulation
Intelligible And Efficient
Richard Hurdwell, Richard Hurdwell Engineering;
Dr. Felix Pfister, AVL
The Development of a Motion Based Driving
Simulator Using CarMaker
Paul Chappell, Jaguar Land Rover; Cruden
Advanced Energy Management Vehicle Dynamics & Controls
13:30 Virtual Development Platform for
Project OpEneR: Optimal Energy
Management & Recovery
Dr. Kosmas Knödler, Bosch;
Dr. Stephen Jones, AVL;
(Consortium AVL, Bosch, PSA, FZI, CTAG)
14:00 eco DAS – Development of Green Driver
2
Assistance Systems by Using Virtual
Prototypes
Peter Korzenietz, Matthias Kluin,
Prof. Dr. Hermann Winner,
Prof. Dr. Christian Beidl, TU Darmstadt
14:30 Coffee Break and Exhibition
Plenary Session
Simulation-Based Homologation & Processes
HIL for ABS/ESP controller development
and testing
Prasanna Venkatesan, ARAI India
Einstein-Hopf Approach to Road Surface
Roughness Modelling with Applications to
Powertrain And Vehicle Testing
Prof. Dr. Stefan Jakubek, TU Wien
15:30 Simulation-Based Passenger Car ESC Homologation Using CarMaker/HIL
Karl Michael Hahn, Dr. Henning Holzmann, Opel; Jonathan Webb MEng, IDIADA
16:00 First Homologation of Electronic Stability Control in Passenger Cars by Vehicle
Dynamics Simulation According ECE 13-H – Challenges, Innovation and Benefits
Olivier Macchi, Alfonso Porcel, PSA
16:30 Simulation-Aided Homologation of ESP Systems for NAFTA Vans by
Software-in-the-Loop Method
Klaus Wüst, Daimler; Albert Lutz, Bosch
17:00 Farewell
Dr. Alexander Schmidt, Bernhard Schick, IPG
5 * subject to change
6
Second Day
Afternoon