technical programme - aca conference

170 Functionalization of Titanium Alloys by Anodizing Juan José de
Damborenea
The National Centre for
Metallurgical Research
(CENIM)
173 Suitability of Aluminium in Marine Environments Krishnan Kannoorpatti North Australian Centre for
Oil and Gas
STREAM: PROTECTIVE COATINGS
13 Blast Cleaning Standards: Cutting through the Confusion? Robert Francis R A Francis Consulting
Services
15 The Application of Plasma Electrolyte Oxidation (PEO) to the Production of
Corrosion Resistant Coatings on Magnesium Alloys: A Review
Riyad Hussein University of Windsor
41 The Effect of Cationic Surfactants on Corrosion Resistance and Adhesion of
Coating on Mild Steel Cleaned by Sulfamic Acid Solution
Sadegh Mahvidi Institute for Color Science
and Technology
44 Silane Coating for the Corrosion Protection of a Magnesium Alloy, ZE41 Parama Chakraborty
Banerjee
Monash University
45 Efficiency of Hydrophobic Impregnation- Site Results Grant Dowling Sika Australia Pty Ltd
46 Exploring a Phosphate Protection System for Corrosion Protection CO2 Pipelines
Magdi Hanna CSIRO
57 Energy Efficiency and Capital Savings: Sustainable Corrosion Management Ray Van Haven Blygold Oceania
71 Control of Corrosion of Mg Alloys using Biocompatible Ionic Liquid in Simulated
Body Fluid
Yafei Zhang ACES, Deakin University
79 A Visual Method of Corrosion Management using Protective Coatings Jim Mackay International Protective
Coatings
97 Electroless Ni-P-PTFE-Al2O3 Hybrid Nanocomposite Coating for Corrosion
Resistance
Ankita Sharma I.I.T. - Roorkee
112 Corrosion Resistant Manganese Phosphate Conversion Coatings for Magnesium
Alloys
Xiaobo Chen CAST, Monash University
125 Coatings Inspection: How Good is Good Enough? – an Inspectors Viewpoint Tony Ridgers Akzo Nobel Pty Ltd
150 Inhomogeneity of Organic Coatings and its Effect of Protection Sina Jamali IPRI, University of
Wollongong
163 Developments in Coating Thickness Gauges and Paperless QA David Beamish DeFelsko Corporation
166 Dehumidification and Temperature Control during Surface Preparation,
Application and Curing for Coatings/ Linings
Brian Battle Dehumidification
Technologies
167 Thermal Metal Spray: Successes, Failures and Lessons Learned Willie Mandeno Opus International
Consultants Ltd
poster session
Abstract No. Abstract Title Corresponding Author Organisation
27 The CO2 Corrosion Inhibition of X52 Carbon Steel at High Pressure CO2-Water Environment
Abdel Hafiz Mustafa Universiti Teknologi
30 The Effect of Aluminium Alloying on the Corrosion Resistance of Cast Steel Robert Jeffrey The University of Newcastle
50 Electrochemical Corrosion Behavior of WE54 Magnesium Alloy in 0.5wt.% NaCl
Solution
53 Comparison of General and Localised Corrosion Behaviour of Smooth and
Rough Magnesium Alloy in NaCl and Simulated Body Fluid
54 Internal Corrosion of CO 2 Pipelines for Carbon Capture
and Storage
89 Comparison of the Corrosion of Carbon Steel in Natural Seawaters - Evidence
of MIC?
96 Influence of Sulphate Reducing Bacteria in Stress Corrosion Cracking of Mild
Steel in Aqueous Solutions
99 Failure Analysis and Fitness-For-Service Assessment for a Storage Tank with
Hydrogen Blisters
Oluwole Raymond
Kazum
James Cook University
Rhys Walter James Cook University
Samson Sim Monash University/CSIRO
Scott Wade Swinburne University of
Technology
Sneha Patil Monash University
Mohammad Reza
Shishesaz
Petroleum University of
Technology
128 Localised Corrosion of 6xxx Series Aluminium Alloys Wenjie Liang Central South University
133 Influence of Graphene Coating on the Corrosion Resistance of Pure Cu Parama Chakraborty
Banerjee
139 Microstructural Aspects Accompanying Sensitisation in 5xxx Series Aluminum
Alloys
149 Investigation into Tubular Structure Formed by Pitting Corrosion on the Surface
of Carbon Steel
Monash University
Ruifeng Zhang Monash University
S.M. Ahmed Majmaah University