LSI Greenlee?? RDB/RDS Series - LSI Industries Inc.
LSI Greenlee?? RDB/RDS Series - LSI Industries Inc.
LSI Greenlee?? RDB/RDS Series - LSI Industries Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
In Concrete<br />
Concrete<br />
Install fixture<br />
flush with concrete,<br />
marble, or pavers<br />
In Soil<br />
Install fixture slightly<br />
above grade<br />
Back fill hole<br />
w/ sand or gravel<br />
Use thread sealant<br />
to prevent leakage<br />
Rigid PVC Conduit<br />
(by others)<br />
Flexible Conduit<br />
(by others)<br />
Bolt/nuts<br />
(by others)<br />
In Marble/Pavers<br />
Marble or pavers<br />
Trim ring<br />
(optional)<br />
In Low Marshy<br />
Areas<br />
Rebar<br />
(by others)<br />
Pour concrete<br />
to anchor rebar<br />
<strong>RDB</strong>/<strong>RDS</strong> Installation<br />
For easy installation and trouble-free operation, <strong>LSI</strong> <strong>Greenlee</strong> Lighting recommends:<br />
Follow complete installation instructions packaged with each luminaire (also available on our website)<br />
Use flexible PVC conduit and apply thread sealant to all conduit fittings<br />
Connect supply and fixture wires with silicone filled connectors (supplied)<br />
Seal conduit entries (around wires - from inside j-box) using mastic in Seal Pack<br />
Encapsulate conduit entries and wires with potting compound supplied in Seal Pack<br />
Install junction box cover and properly tighten all fasteners<br />
Install Power Pack – PPK, Access Barrier Plate, and Optics as instructed<br />
Clean lens gasket and gasket seating surface (fixture flange)<br />
Install lens, lens retainer (or replacement accessory), and fasteners<br />
Using an alternating torque sequence, tighten fasteners until lens frame seats against housing.<br />
<strong>RDB</strong> Shown<br />
<strong>RDS</strong> Shown<br />
Tie down screwkit<br />
P/N 35750005<br />
1/4"∅ perforated<br />
strap (by others)