Fire detection equipment - VIS Security

www.apollo-fire.co.uk 

PRODUCT CATALOGUE 2009 

Fire detection 

equipment

By Appointment to 

Her Majesty The Queen 

Manufacturers of Fire Detection 

& Alarm Products 

Apollo Fire Detectors Limited 

Hampshire 

Why Choose Apollo? 

• Largest independent smoke detector 

manufacturer in the world 

• Certified to all key international approvals 

• The best people work for Apollo 

• Trustworthy, integrity & supportive 

• Localised customer service worldwide 

• Ex stock delivery 

• 100% reliability, 100% tested 

• Open, digital protocol 

• Forwards and backwards product compatibility 

• World 

Class Fire Solutions 

Apollo - The Partner of Choice 

Apollo Fire Detectors Ltd. has specialised in the design and 

manufacture of high quality fire detection products since 

1980. In that time, the company has broadened its capability 

from a straightforward focus on conventional fire detectors 

to include the manufacture of sophisticated analogue 

addressable detectors and interfaces for monitoring and 

controlling equipment in fire protection systems. 

Apollo applies the most modern production techniques and has 

invested in sophisticated manufacturing equipment to ensure 

consistent high quality products and fast response to customer 

requirements. Through planned expansion, Apollo has reached a 

leading position in the market for professional fire detectors detectors and 

exports over over half of its its production to countries countries around the world. 

In 2007, Apollo Apollo unveiled unveiled a new brand brand identity, further cementing cementing 

its position as a world class fire solutions solutions provider. 

Based in Havant, Hampshire, Apollo operates from one site. All 

departments - Research and Development, Sales and Marketing, 

Manufacturing and Finance are located here. 

Apollo is a Halma company. Halma is a holding company for over 40 

subsidiaries worldwide, all engaged in specialist engineering activities. 

Information in this catalogue is given in good faith, but Apollo Fire Detectors cannot be held responsible for any omissions or errors. The 

company reserves the right to change specifications of products at any time without prior notice.

4 

6 

8 

24 

34 

40 

44 

52 

68 

How do Detectors Work? 

New Products 

Intelligent Fire Detection 

Discovery, XP95 

Conventional Fire Detection 

Orbis, Series 65 

Two-wire technology 

AlarmSense 

Wireless technology 

XPander 

Specialist Detectors 

Flame, Beam & Duct Detectors 

Audio Visual Signalling 

Sounders, Beacons, Sounder Beacons, 

Sounder Beacon Bases 

Interfaces 

Isolated, Non-Isolated, Mini, DIN-Rail 

78 

82 

86 

94 

102 

116 

120 

122 

129 

Manual Call Points 

Mounting Accessories 

Marine 

Discovery, Orbis 

Intrinsically Safe 

XP95, Orbis 

UL 

XP95A, Series 65A, Discovery UL 

Test Equipment and Maintenance 

Additional Services 

Loop Calculator, Training 

Approvals 

Index 

Contents

4 How do Detectors Work? 

How do 

Detectors 

Work? 

Ionisation smoke detector 

The sensing part of the detector consists of two 

chambers - an open, outer chamber and a semi-sealed 

reference chamber within. Mounted in the reference 

chamber is a low activity radioactive foil of Americium 

241 which enables current to flow between the inner and 

outer chambers when the detector is powered up. As 

smoke enters the detector, particles become attached to 

the ions, causing a reduction in current flow in the outer 

chamber and hence an increase in voltage measured at 

the junction between the two chambers. The voltage 

increase is monitored by the electronic circuitry which 

triggers the detector into the alarm state at a preset 

threshold. An externally visible red LED lights up when 

the detector changes to alarm state. 

Ionisation smoke detectors are good general-purpose 

detectors which respond well to fast-burning 

(flaming) fires and are widely used for property 

protection. 

Integrating ionisation smoke detector 

This type of detector works on the same principles as 

the ionisation smoke detector, but has modified signal 

processing circuitry which allows an alarm threshold to be 

present for up to 20 seconds without initiating an alarm. 

This type of detector is suitable for use in areas where 

transient high levels of smoke may be expected. 

Integrating effect in analogue addressable systems 

In XP95 systems, the integrating effect can be mimicked 

in both ionisation and optical smoke detectors by 

adjusting the control equipment software to cause an 

appropriate delay. Discovery smoke detectors should be 

set to Mode Two or Mode Four to achieve this effect. 

Optical (photo-electric) smoke detector 

Optical smoke detectors incorporate a pulsing infra-red 

LED located in a chamber within the housing of the 

detector. The chamber is designed to exclude light from 

any external source. At an angle to the LED is a photodiode 

which normally does not register the column of 

light emitted by the LED. In the event of smoke from a 

fire entering the chamber, the light pulse from the LED 

will be scattered and hence registered by the photodiode. 

If the photo-diode ‘sees’ smoke on the two 

following pulses, the detector changes into alarm state 

and the indicator LED lights up. The detector housing 

is identical to that of the ionisatio n detector but has 

an indicator LED which is clear in quiescent state but 

produces red light in alarm. 

Optical smoke detectors respond particularly well to 

slow-burning (smouldering) fires. They are widely 

used for life protection.

Heat detector 

Most conventional heat detectors operate by using a 

matched pair of thermistors to sense heat. One thermistor 

is exposed to the ambient temperature, the other is 

sealed. In normal conditions the two thermistors register 

similar temperatures, but, on the development of a fire, 

the temperature recorded by the exposed thermistor 

will increase rapidly, resulting in an imbalance of the 

thermistors, causing the detector to change into alarm 

state. Rate-of-rise detectors are designed to detect a fire 

as the temperature increases, but they also have a fixed 

upper limit at which the detector will go into alarm if the 

rate of temperature increase has been too slow to trigger 

the detector earlier. 

The Series 65 and AlarmSense CS (static response) heat 

detectors have only one thermistor. They change to the 

alarm state at a preset temperature. 

Externally, the heat detectors are distinguishable from 

the smoke detectors by having wide openings to the 

surrounding atmosphere to allow good movement of air 

around the external thermistor. 

A heat detector may be more appropriate than a 

smoke detector where the environment is dirty 

or smoky under normal conditions. It must be 

recognised, however, that any heat detector will 

respond only when a fire is well established and 

generating a high heat output. 

Multisensor detector 

A multisensor detector is basically an optical smoke 

detector - so it will respond well to smouldering fires. The 

addition of a heat sensing element allows the multisensor 

to give a response to fast burning (flaming) fires which is 

comparable to that of an ionisation detector. 

Multisensor detectors are general purpose detectors 

which respond well to a wide range of fires. 

How do Detectors Work? 

Carbon Monoxide (CO) detector 

Carbon Monoxide (CO) is a poisonous gas produced by 

combustion and a CO fire detector is used to indicate the 

outbreak of a fire by sensing the level of CO in the air. 

The detector has an electrochemical cell which senses CO, 

but not smoke or other combustion products. The cells 

do not require much power, so the detector can be made 

electrically compatible with ordinary smoke and heat 

detectors. Apollo manufacturers a CO detector as part of 

the Discovery range. 

CO detectors are particularly good at detecting deepseated, 

smouldering fires. 

Beam detector 

A beam detector is made up of three main parts: the 

transmitter, which projects a beam of infra-red light; 

the receiver which registers the light and produces an 

electrical signal; and the interface, which processes the 

signal and generates alarm or fault signals. When a fire 

develops, smoke particles obstruct the beam of light and, 

once a pre-set threshold has been exceeded, the detector 

will go into alarm. 

Beam detectors are designed to protect large 

open spaces such as atria, museums, churches and 

warehouses. 

Flame detector 

A flame detector is designed to detect either ultraviolet 

(UV) or infra-red (IR) radiation emitted by a fire. The XP95 

Dual IR flame detector is sensitive to low-frequency, 

flickering infra-red radiation. This means that the detector 

can operate even if the lens is contaminated by a layer of 

oil, dust, water vapour or ice. 

Flame detectors are effective in protecting areas 

where flaming fires may be expected. 

5

6 New Products 

New 

Products 

Apollo prides itself on being a leader in product 

innovation. Providing fire solutions that meet the 

demands of our customers is the main pillar of 

Apollo’s product development programme. We 

are constantly working with our customers to 

develop new products to meet their needs. 

A further commitment to Apollo’s customer focus 

has seen the Marketing team be strengthened 

by the introduction of three new product 

management roles. These dedicated personnel 

will be responsible for the future direction of the 

portfolio as well as the internal management of 

the ranges. 

A prime responsibility of the new roles is 

continuation of customer focused product 

development within Apollo and continuing to be 

the Partner of Choice. 

If you have any comments or suggestions on 

any new or existing products, feel free to email 

ideas@apollo-fire.co.uk

New products for 2009 

Discovery Upgrade 

The Discovery range has been subjected to a 

thorough revision of the electronics and this 

has resulted in significant improvement to the 

Multisensor detector capabilities. It is possible 

to read out virtually instantly the analogue 

values for smoke and heat separately. 

DIN-Rail Mains Input/Output Unit 

The DIN-Rail Mains Input/Output Unit provides 

a voltage-free, single pole change-over relay 

output and a monitored switch input. The 

unit supervises one or more normally-open 

switches connected to a single pair of cables. 

DIN-Rail Sounder Controller (5 Amperes) 

The DIN-Rail Sounder Controller (5 Amperes) 

is used to control the operation of a zone of 

externally powered sounders and report their 

status to the control panel. 

Deckhead Mounting Box 

The Deckhead Mounting Box gives extra 

protection to devices to be fitted in areas 

where there is the possibility of moisture or 

condensation ingressing through the rear of 

the of the base. This new version is suitable 

for a wider range of detector bases as well 

as Apollo’s AV bases. 

2009 – Under 

development 

New Products 

There are a number of new products due for 

launch during the course of 2009. They are at 

the early stages of development. When ready 

for launch the website, eMonitor and Monitor 

newsletters will announce this, so keep an eye 

out! Products currently under development, in 

no particular order include: 

XPander Input/Output Unit 

Locally Powered Zone Monitor 

DIN-Rail Zone Monitor for IS Heads 

110dB(A) Open-Area Sounder Beacon 

Marine 110dB(A) Open-Area Sounder Beacon 

Discovery CO/Heat Detector 

Sounder Controller 8 Amperes (Marine) 

Conventional Flush Mounted Smoke Detector 

Marine DIN-Rail Mains Input/Output Unit 

Marine Base Mounted Flame Detectors 

Discovery Open-Area Sounder Beacon 

UL approved Open-Area Sounder 

UL approved Releasing Control Module 

UL approved Mini Monitor Module 

7

108 Intelligent Fire Detection 

Intelligent 

Fire 

Detection 

In an Intelligent system all devices have unique ‘addresses’ and are 

connected in loops to the control panel. Intelligent systems give advanced 

warning of a developing hazard and can pinpoint the individual device 

raising alarm. There are two types of intelligent system – those with 

‘distributed intelligence’ and those with ‘centralised intelligence’. 

In systems with distributed intelligence the detectors incorporate 

processors which can determine whether alarm levels of smoke or heat 

exist and can initiate action accordingly. 

Detectors in systems with centralised intelligence monitor the air around 

them for smoke or heat and transmit the data to the control panel on 

interrogation. The processor in the panel compares the values with stored 

values and determines whether a pre-alarm or alarm should be signalled. 

The advantages of distributed intelligence are local adaptation to 

environment and reduction of traffic on the supply and data wires. The 

advantage of centralised intelligence is the ability to upgrade a system very 

quickly and easily by upgrading the control panel.

Discovery is a range of high-specification, 

intelligent fire detectors developed to 

meet the requirements of sophisticated 

systems while providing engineers with 

an additional dimension in fire protection 

capability. Discovery has a ‘distributed 

intelligence system’ where decisions are 

made in the detector head as well as 

at the control panel. Drift compensation 

is also incorporated into the detector, 

allowing it to adapt to dirty or dusty 

environments, which reduces false alarms. 

Each detector in the Discovery range can operate in one 

of five response modes, which can be selected from the 

control panel or hand held programmer. The response 

characteristics have been carefully set so that the detectors 

comply with the requirements of the relevant part of 

EN54 in all response modes. Mode One will give a higher 

sensitivity to fire than Mode Five. 

Discovery gives you total reassurance in installations where 

adaptability to changing conditions and protection against 

unwanted alarms is paramount. 

Key features of Discovery include: 

• Rejection of transient signals 

• Flashing LED option 

• Five response modes for ease of optimisation to 

changing environments 

• Drift compensation to ensure constant sensitivity 

• Four bytes of non-volatile memory for user data 

• Alarm flag for fast alarm reporting 

• Conventional alarm facility during control panel 

processor fault 

• 360° visibility in alarm 

• Compatible with XP95 systems 

• Insect Resistant 

NEW FOR 2009! 


DISCOVERY 

Discovery 

intelligent fire 

detection 

The Discovery range has been subjected to a 

thorough revision of the electronics and this has 

resulted in significant improvement to the Multisensor 

detector capabilities. It is possible to read out virtually 

instantly the analogue values for smoke and heat 

separately. 

This enables panel manufacturers to develop features 

which will provide more effective management 

of false alarms. An example of this would be an 

increased smoke value which might normally lead to 

a pre-alarm or even an alarm. If the heat value is read 

out separately and it shows little or no rise it can be 

concluded that it is not smoke from a fire but steam 

which is causing the high smoke analogue value. 

9


DISCOVERY 

Discovery Ionisation Smoke Detector 

The Discovery Ionisation Smoke Detector uses 

a low activity radioactive foil to detect fires by 

irradiating the air in the smoke chambers and 

causing a current flow. If smoke enters the 

chamber, the current flow is reduced leading 

to an alarm. 

Discovery Ionisation Smoke Detector 58000-500 

Discovery Optical Smoke Detector 

The Discovery Optical Smoke Detector works 

using the light scatter principle and is ideal for 

applications where slow-burning or smouldering 

fires are likely. 

Discovery Optical Smoke Detector 58000-600 

Discovery Heat Detector 

The Discovery Heat Detector, distinguishable 

by the low airflow resistant case, uses a single 

thermistor to sense the air temperature around 

the detector. 

Discovery Heat Detector 58000-400 

Discovery Multisensor Detector 

The Discovery Multisensor Detector comprises 

optical smoke and thermistor temperature sensors 

whose outputs are combined to give the final 

analogue value. As a result, the multisensor is 

useful over a wide range of applications and is 

highly immune to false alarms. 

Discovery Multisensor Detector 58000-700 

Discovery Carbon Monoxide Detector 

The Discovery Carbon Monoxide (CO) Detector is 

good at detecting deep-seated fires. Please note 

that CO detectors do not detect smoke particles 

or heat and are not universal replacements for 

smoke detectors. 

Discovery Carbon Monoxide Detector 58000-300 

Please check the Apollo website on a regular basis for up-to-date approvals information. 

• Responds well to fast-burning, flaming fires 

• Designed to operate in a variety of 

environments 

• Remote test feature 

• Responds well to slow-burning, smouldering 

fires 

• Well suited for bedrooms and escape routes 

• Unaffected by wind or atmospheric pressure 


• Ideal in environments that are dirty or smoky 

under normal conditions 

• Well suited for warehouses, loading bays and 

car parks 



• Ideal for a wide range of applications 

• Enhanced false alarm management 

• Well suited for environments such as hotel 

bedrooms 


• Well suited for sensitive environments 

• Heat only, optical only options 


• Enhanced detection capability 

• Early response to hot fires 

• Ideal for smouldering fires 

• Less susceptible to false alarms caused by 

steam than smoke alarms 

• Five response modes 

• Remote test feature

Intelligent Mounting Base 

All detectors in the Discovery range fit the 

Intelligent Mounting Base. The Mounting Base 

is a low insertion force base with stainless steel 

contacts for the detector terminals. XPERT cards 

are supplied with all bases. 

Intelligent Mounting Base 45681-210 

Intelligent Deep Base 

The Intelligent Deep Base is a mounting base for 

Discovery products which has an increased depth 

which allows for cables to be inserted into the 

side of the product. 

Intelligent Deep Base 45681-209 

Isolating Base 

The new style Isolating Base senses and detects 

short-circuit faults on Discovery loops and spurs. 

Isolating Base 45681-284 

Product will replace 45681-321 during 2009 

Isolator 

The Isolator is placed at intervals on the loop and 

ensures that, in the case of a short-circuit, only 

the section between the isolators will be affected. 

When the short-circuit is removed, the isolators 

automatically restore power and data to the 

isolated section. 

Isolator 55000-720 



DISCOVERY 

• XPERT addressing 

• One way fit 

• Locking feature to prevent unauthorised 

removal 

• Enables surface wiring 

• The equivalent of up to 20 smoke detectors 

may be installed between isolating bases 

• High brightness LED 

• Compatible with Discovery CO detector 

• Detects wiring short circuits using patented 

technology 

• Minimises disruption from short-circuits 

• Automatic de-isolation on short-circuit removal 


may be installed between isolators 

11


DISCOVERY 

Isolator Base 

The Isolator Base is unique and designed to only 

accept the Isolator 55000-720. 

Isolator Base 45681-211 

Intelligent Low Power Relay Base 

The Low Power Relay Base incorporates a low 

power relay to control field equipment such as 

automatic door closers. 

Intelligent Low Power Relay Base 45681-242 

Intelligent Heater Base 

The Intelligent Heater Base is designed to be used 

in cold climates where environmental conditions 

could result in either icing or condensation 

affecting the operation of detectors. It is 

recommended that the heater base be used in 

conjunction with either a Waterproof Base Cover 

or Deckhead Mounting Box to minimise moisture 

ingress. 

Intelligent Heater Base 45681-219 

Waterproof Base Cover 45681-519 

Deckhead Mounting Box 45681-217 

MiniDisc Remote Indicator 

The MiniDisc Remote Indicator is a light-weight, 

compact LED indicator for use in fire protection 

systems. 

MiniDisc Remote Indicator 53832-070 


• Only accepts isolators 

• Gives a set of voltage free contacts controlled 

by the remote output of a detector 

• Draws negligible current 

• Capable of switching up to 30V at 1A 

• Raises the ambient temperature of a detector 

chamber by approximately 10°C 

• Limits the risk of potential for lose of 

functionality caused to detectors installed in 

these conditions. 

• Can be used across the entire Apollo range 

• Small and discrete 

• Anti-tamper screw to protect against 

unauthorised removal

Ancillary devices available for the Discovery range: 


DISCOVERY 

Product Name Part Number Page No. 

MOUNTING ACCESSORIES 82 

Backplate 45681-233 83 

Base Cover 45681-380 83 

Conduit Box 45681-204 83 

Sounder Ceiling Plate 45681-311 83 

Module Base 38531-822 83 

Deckhead Mounting Box 45681-217 84 

Metal Deckhead Mounting Box PG16 29600-131 84 

Metal Deckhead Mounting Box M20 29600-139 84 

Deckhead Adaptor PG16-M20 27249-005 84 

Detector Ceiling Tile Mounting Box 45681-309 84 

Sounder Ceiling Tile Mounting Box 45681-310 84 

Beacon Enclosure 29600-318 84 

DIN-Rail Interface Enclosure (4 units) 29600-239 85 


1.5mm Hexagonal Driver 29600-095 85 

MANUAL CALL POINTS 78 

Discovery Manual Call Point Red (Surface) 58100-910 79 

Discovery Manual Call Point with Isolator Red (Surface) 58100-908 79 

Discovery Manual Call Point White 58100-926 79 

Discovery Manual Call Point Yellow 58100-927 79 

Discovery Manual Call Point Blue 58100-928 79 

Discovery Manual Call Point Green 58100-929 79 

Transparent Hinged Cover 26729-152 79 

Weatherproof Manual Call Point Red 58100-950 80 

Weatherproof Manual Call Point Red with Isolator 58100-951 80 

STANDARD INTERFACES 69 

Input/Output Unit 55000-847 70 

Three Channel Input/Output Unit 55000-588 70 

Three Channel Input/Output Unit PCB only 43781-588 70 

Output Unit 55000-849 70 

Sounder Control Unit 55000-852 70 

Switch Monitor 55000-843 71 

Switch Monitor Plus 55000-841 71 

Zone Monitor 55000-845 71 

MINI INTERFACES 73 

Mini Switch Monitor 55000-760 74 

Mini Switch Monitor with fly leads 55000-833 74 

Mini Switch Monitor with fly leads (Interrupt) 55000-832 74 

DIN-RAIL INTERFACES 75 

NEW!! DIN-Rail Sounder Controller (5 Amperes) 55000-182 76 

DIN-Rail Input/Output Unit 55000-803 76 

DIN-Rail Output Unit 55000-804 76 

DIN-Rail Switch Monitor 55000-822 76 

DIN-Rail Switch Monitor Plus 55000-821 77 

DIN-Rail Zone Monitor with Isolator 55000-812 77 

DIN-Rail Dual Isolator 55000-802 77 

13


DISCOVERY 


AUDIO VISUAL SIGNALLING 

Discovery Sounder Beacon Base 45681-393 65 

Intelligent Open-Area Sounder Red 55000-001 54 

Intelligent Open-Area Sounder White 55000-002 54 

Intelligent 100dB (A) Open-Area Sounder Red 55000-278 54 

Intelligent 100dB (A) Open-Area Sounder White 55000-279 54 

Intelligent 100dB (A) Open-Area Sounder Slow Whoop Red 55000-276 54 

Intelligent 100dB (A) Open-Area Sounder Slow Whoop White 55000-277 54 

Intelligent 100dB (A) Open-Area Weatherproof Sounder Red 55000-274 54 

Intelligent 100dB (A) Open-Area Weatherproof Sounder White 55000-275 54 

Integrated Base Sounder 45681-278 56 

Integrated Base Sounder with Isolator 45681-277 56 

Integrated Base Sounder Slow Whoop 45681-291 56 

Integrated Base Sounder Slow Whoop with Isolator 45681-290 56 

Integrated Base Sounder DIN-Tone with Isolator 45681-300 56 

White Cap 45681-292 56 

Red Cap 45681-293 56 

Intelligent Base Sounder 45681-265 56 

Intelligent Base Sounder, for use with Isolating Base 45681-266 56 

Intelligent Base Sounder Slow Whoop 45681-267 56 

Intelligent Base Sounder Slow Whoop for use with Isolating Base 45681-268 56 

White Cap 29600-256 56 

Red Cap 29600-257 56 

Ancillary Base Sounder 45681-276 56 

Intelligent Open-Area Beacon Red Lens 55000-009 59 

Intelligent Open-Area Beacon Clear Lens 55000-010 59 

Loop-Powered Beacon Red 55000-877 59 

Loop-Powered Beacon Amber 55000-879 59 

Loop-Powered Beacon Clear Lens/Red Flash 55000-878 59 


Loop-Powered Beacon Base with Isolator 45681-333 61 

Loop-Powered Beacon Base with Standard Flash 45681-335 61 

Loop-Powered Beacon Base with Australian Flash 45681-337 61 

Intelligent Open-Area Sounder Beacon Red Lens 55000-005 63 

Intelligent Open-Area Sounder Beacon Clear Lens 55000-006 63 

Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-293 63 

Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-294 63 

Multi-Tone Open-Area Sounder Beacon Red 55000-291 63 

Multi-Tone Open-Area Sounder Beacon White 55000-292 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-298 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-299 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon Red 55000-296 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon White 55000-297 63 

Sounder Beacon Base with Isolator 45681-330 65 

Sounder Beacon Base 45681-331 65 

Sounder Beacon Base with Australian Tone 45681-336 65 

Sounder Beacon Base with Isolator DIN-Tone 45681-334 65 

Sounder Beacon Base with NZ Tone 45681-338 65 

Sounder Beacon Base Slow Whoop with Isolator 45681-332 65 

Magnetic Wand 29650-001 67


DISCOVERY 

15


XP95 

XP95 



The XP95 range of intelligent fire 

detectors is advanced in design, improved 

in performance and has unique features 

that benefit the installer and end user. 

The range features smoke detectors (ionisation and optical), 

standard and high temperature heat detectors and a 

multisensor. Beam detectors, flame detectors, manual call 

points, audio visual signalling devices, interface units and 

isolators complete the range. XP95 has a ‘central intelligence’ 

system where all the decisions are made by the control panel. 

Apollo has always used an open, digital protocol since 1986 

and has ensured backward compatibility when developing new 

products. An open protocol allows freedom of choice for the 

fire system specifier, installer and end user. A system using 

a digital protocol is also much less susceptible to corruption 

than an analogue protocol and is therefore often preferred in a 

system which is life critical. 

Key features of XP95 include: 

• Alarm Flag for fast alarm reporting 

• Alarm Address for fast location of alarm 

• XPERT card addressing 

• Electronics-free base 

• Easy installation 

• Elegant design 

• Insect Resistant

XP95 Ionisation Smoke Detector 

The XP95 Ionisation Smoke Detector uses a low 

activity radioactive foil to detect fires by irradiating 

the air in the smoke chambers and causing a 

current flow. If smoke enters the chamber, the 

current flow is reduced leading to an alarm. 

XP95 Ionisation Smoke Detector 55000-500 

XP95 Ionisation Smoke Detector (Black) 55000-660 

XP95 Ionisation Smoke Detector (VdS) 55000-520 

XP95 Optical Smoke Detector 

The XP95 Optical Smoke Detector works using the 

light scatter principle and is ideal for applications 

where slow-burning or smouldering fires are likely. 

XP95 Optical Smoke Detector 55000-600 

XP95 Optical Smoke Detector (Black) 55000-660 

XP95 Optical Smoke Detector (VdS) 55000-620 

XP95 Heat Detector 

The XP95 Heat Detector monitors temperature by 

using a single thermistor network which provides 

a count output proportional to the external air 

temperature. The XP95 range features two Heat 

Detectors, standard and high temperature. The 

standard heat detector is classified as an A2S 

device and will report an alarm at 55°C. The high 

temperature detector, classified as a CS device, 

will report an alarm at 90°C. 

XP95 Heat Detector A2S 55000-400 

XP95 Heat Detector A2S (VdS) 55000-420 

XP95 Heat Detector CS 55000-401 

XP95 Multisensor Detector 

The XP95 Multisensor Detector contains an optical 

smoke sensor and a thermistor temperature 

sensor whose outputs are combined to give the 

final analogue value. 

XP95 Multisensor Detector 55000-885 



XP95 



environments 

• Minimal effects from temperature, humidity, 

atmospheric pressure 

• Well protected against electromagnetic 

interference over a wide frequency range 


fires 






car parks 


• Sensitive to a wide range of fires 


bedrooms 


17


XP95 

Intelligent Mounting Base 

All detectors in the XP95 range fit the Intelligent 

Mounting Base. The Mounting Base is a low 

insertion force base with stainless steel contacts 

for the detector terminals. XPERT cards are 

supplied with all bases. 

Intelligent Mounting Base 45681-210 

Intelligent Mounting Base (Black) 45681-361 

Isolating Base 

The new style Isolating Base senses and detects 

short-circuit faults on XP95 loops and spurs. 


Product will replace 45681-321 during 2009 

Isolator 

The Isolator is placed at intervals on the loop and 

ensures that, in the case of a short-circuit, only 


When the short-circuit is removed, the isolators 




Isolator Base 

The Isolator Base is unique and designed to only 

accept the Isolator 55000-720. 




• One way fit of detector 


removal 


may be installed between isolating bases 

• High brightness LED 


technology 





• Only accepts isolators

Intelligent Low Power Relay Base 

The Low Power Relay Base incorporates a low 

power relay to control field equipment such as 

automatic door closers. 

Intelligent Low Power Relay Base 45681-242 

Intelligent Deep Base 

The Intelligent Deep Base is a mounting base for 

XP95 products which has an increased depth which 

allows for cables to be inserted into the side of the 

product. 

Intelligent Deep Base 45681-209 

Intelligent Heater Base 

The Intelligent Heater Base is designed to be used 

in cold climates where environmental conditions 

could result in either icing or condensation 

affecting the operation of detectors. It is 

recommended that the heater base be used in 

conjunction with either a Waterproof Base Cover 

or Deckhead Mounting Box to minimise moisture 

ingress. 

Intelligent Heater Base 45681-219 






systems. 





XP95 







• Limits the risk of potential for loss of 






unauthorised removal 

19


XP95 

Ancillary devices available for the XP95 range: 



Backplate 45681-233 85 

Base Cover 45681-380 83 




NEW!! Deckhead Mounting Box 45681-217 84 









Series 90 to XP95 Base Adaptor 45681-238 85 



XP95 Manual Call Point Red (Surface) 55100-905 79 

XP95 Manual Call Point with Isolator Red (Surface) 55100-908 79 

Transparent Hinged Cover 26729-152 79 

STANDARD INTERFACES 69 

Input/Output Unit 55000-847 70 

Three Channel Input/Output Unit 55000-588 70 

Three Channel Input/Output Unit PCB only 43781-588 70 

Output Unit 55000-849 70 

Sounder Control Unit 55000-852 70 

Switch Monitor 55000-843 71 

Switch Monitor Plus 55000-841 71 

Zone Monitor 55000-845 71 

MINI INTERFACES 73 

Mini Switch Monitor 55000-760 74 

Mini Switch Monitor with fly leads 55000-833 74 

Mini Switch Monitor with fly leads (Interrupt) 55000-832 74 

DIN-RAIL INTERFACES 75 

NEW!! DIN-Rail Mains Input/Output Unit 55000-797 76 

NEW!! DIN-Rail Sounder Controller (5 Amperes) 55000-182 76 

DIN-Rail Input/Output Unit 55000-803 76 

DIN-Rail Output Unit 55000-804 76 

DIN-Rail Switch Monitor 55000-822 76 

DIN-Rail Switch Monitor Plus 55000-821 77 

DIN-Rail Zone Monitor with Isolator 55000-812 77 

DIN-Rail Dual Isolator 55000-802 77 

AUDIO VISUAL SIGNALLING 52 

Intelligent Open-Area Sounder Red 55000-001 54 

Intelligent Open-Area Sounder White 55000-002 54 

Intelligent 100dB (A) Open-Area Sounder Red 55000-278 54 

Intelligent 100dB (A) Open-Area Sounder White 55000-279 54 

Intelligent 100dB (A) Open-Area Sounder Slow Whoop Red 55000-276 54



Intelligent 100dB (A) Open-Area Sounder Slow Whoop White 55000-277 54 

Intelligent 100dB (A) Open-Area Weatherproof Sounder Red 55000-274 54 

Intelligent 100dB (A) Open-Area Weatherproof Sounder White 55000-275 54 

Integrated Base Sounder 45681-278 56 

Integrated Base Sounder with Isolator 45681-277 56 

Integrated Base Sounder Slow Whoop 45681-291 56 

Integrated Base Sounder Slow Whoop with Isolator 45681-290 56 

Integrated Base Sounder DIN-Tone with Isolator 45681-300 56 

White Cap 45681-292 56 

Red Cap 45681-293 56 

Intelligent Base Sounder 45681-265 56 

Intelligent Base Sounder, for use with Isolating Base 45681-266 56 

Intelligent Base Sounder Slow Whoop 45681-267 56 

Intelligent Base Sounder Slow Whoop for use with Isolating Base 45681-268 56 

White Cap 29600-256 56 

Red Cap 29600-257 56 

Ancillary Base Sounder 45681-276 56 

Intelligent Open-Area Beacon Red Lens 55000-009 59 

Intelligent Open-Area Beacon Clear Lens 55000-010 59 

Loop-Powered Beacon Red 55000-877 59 

Loop-Powered Beacon Amber 55000-879 59 

Loop-Powered Beacon Clear Lens/Red Flash 55000-878 59 


Loop-Powered Beacon Base with Isolator 45681-333 61 

Loop-Powered Beacon Base with Standard Flash 45681-335 61 

Loop-Powered Beacon Base with Australian Flash 45681-337 61 

Intelligent Open-Area Sounder Beacon Red Lens 55000-005 63 

Intelligent Open-Area Sounder Beacon Clear Lens 55000-006 63 

Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-293 63 

Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-294 63 

Multi-Tone Open-Area Sounder Beacon Red 55000-291 63 

Multi-Tone Open-Area Sounder Beacon White 55000-292 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-298 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-299 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon Red 55000-296 63 

Weatherproof Multi-Tone Open-Area Sounder Beacon White 55000-297 63 

Sounder Beacon Base with Isolator 45681-330 65 

Sounder Beacon Base 45681-331 65 

Sounder Beacon Base with Australian Tone 45681-336 65 

Sounder Beacon Base with Isolator DIN-Tone 45681-334 65 

Sounder Beacon Base with NZ Tone 45681-338 65 

Sounder Beacon Base Slow Whoop with Isolator 45681-332 65 

XP95 

21


XPERT CARDS 

XPERT 

cards 



Apollo’s Intelligent ranges use patented 

XPERT cards. A unique XPERT card provides 

simple, user friendly and accurate 

identification of detector location where a 

coded card, inserted into the base, is read 

by any detector once plugged in. All the 

electronic components are in the detector 

but the location information is held in 

the base which saves time and increases 

accuracy during commissioning.

Blank XPERT Card 

A universal address card supplied with all bases. 

Using a coding guide, pips are removed to set the 

address of the inserted detector. 

Blank XPERT Card 38531-771 

Pre-Addressed XPERT Cards 

Pre-addressed XPERT cards are supplied with pips 

already removed. 

Pre-Addressed XPERT Cards 1-126 45682-127 

XPander XPERT Cards 


XPERT CARDS 

• Simplifies and speeds up installation and 

commissioning 

• Uses patented, proven technology 

• Address remains the same, no matter how 

often detectors are replaced 

• Flexibility to create any address 

• Saves time and increases accuracy during 

commissioning 

• Uses patented, proven technology 

• Address remains the same, no matter how 

often detectors are replaced 

Product Name Part Number 

XPander Blank XPERT Card (White) 29600-413 

XPander Blank XPERT Card (Red) 29600-399 

XPander XPERT cards are not interchangeable with those used with XP95 and Discovery. 


23

10 24 


Conventional 

Fire 

Detection 

In conventional systems detectors are wired as 

a circuit or ‘zone’. They signal fire conditions to 

a control panel by changing from a high to low 

impedance. The panel detects this impedance 

change by current monitoring and identifies the 

zone. Individual detectors cannot be identified.

Orbis is a range of conventional 

detectors which has been developed 

with sophisticated technology previously 

only found in intelligent detectors. Orbis 

is a range with modern styling and 

incorporates a mounting base which 

saves installation time. 

Key features of Orbis: 

• Automatic drift compensation with DirtAlert ® warning 

• Patented FasTest ® which reduces the time taken to test 

detectors 

• SensAlert ® uses a flashing LED to indicate that the 

sensor is not operating correctly 

• StartUp for fast commissioning 

• Attractive and compact design 

• Electrically compatible with Series 60 and Series 65 

• Wide voltage and operating temperature ranges 

• Algorithms for transient rejection 


• 360° visibility of LEDs 

• Insect Resistant 

Conventional Fire Detection 11 25 

ORBIS 

Orbis 

conventional 

fire detection

10 26 


ORBIS 

Orbis Optical Smoke Detector 

The Orbis Optical Smoke Detector works using the 

well established light scatter principle, however, 

the sensing technology is radically different 

in design from previous optical detectors and 

significantly reduces false alarms. 

Orbis Optical Smoke Detector ORB-OP-12001-APO 

Orbis Optical Smoke Detector ORB-OP-12003-APO 

with flashing LED † 

Orbis Multisensor Detector 

The Orbis Multisensor detector benefits from 

the same false alarm reduction technology as 

the optical detector. It is a thermally enhanced 

smoke detector and so will not give an alarm 

from heat alone. 

Orbis Multisensor Detector ORB-OH-13001-APO 

Orbis Multisensor Detector ORB-OH-13003-APO 


Orbis Heat Detector 

The Orbis Heat Detector monitors temperature by 

using a single thermistor network which provides 

a voltage output proportional to the external air 

temperature. There are seven classes of heat 

detectors in the Orbis range designed to suit a 

wide variety of operating conditions. 

Orbis Heat Detector 

Rate-of-Rise, MAT 50°C 

A1R - Standard ORB-HT-11001-APO 

A1R - with flashing LED † 

Static, MAT 50°C 

ORB-HT-11013-APO 

A1S - Standard ORB-HT-11166-APO 

A1S with flashing LED † ORB-HT-11167-APO 

A2S - Standard ORB-HT-11002-APO 

A2S - with flashing LED † 



BR - Standard ORB-HT-11003-APO 

BR - with flashing LED † 



BS - Standard ORB-HT-11004-APO 

BS - with flashing LED † 



CR - Standard ORB-HT-11005-APO 

CR - with flashing LED † 



CS - Standard ORB-HT-11006-APO 

CS - with flashing LED † ORB-HT-11018-APO 

MAT (Maximum Application Temperature) 


† Does not have VdS approval 

• Responds well to slow-burning, smouldering fires 

• Performs well in black and white smoke 

• Extra confirmation of smoke before alarm 

signal is given 

• Reduced incidence of false alarms 

• Sensing chamber keeps out dust and other 

airborne contaminants 

• Operates over a broad range of voltages at 

extremes of temperature 



• Increased reliability of detection 





• Can be used for applications where smoke 

detectors are unsuitable 





Choosing a heat detector

Orbis LX Base 

The Orbis LX Base is a low cost mounting base for 

use with Orbis detectors. 

Orbis LX Base ORB-MB-00012-APO 

TimeSaver Base ® 

The TimeSaver Base ® is a completely new design 

that provides installers with an open working 

area with fixing holes shaped to allow a simple 

mounting procedure. 

TimeSaver Base ® ORB-MB-00001-APO 

TimeSaver Base ® LX 

(simplified) version 

ORB-MB-00002-APO 

TimeSaver Diode Base 

The TimeSaver Diode Base has the same design as 

the standard TimeSaver Base ® with the addition of 

a diode. It is used in systems which house active 

EOL monitoring for head removal. 

TimeSaver Diode Base ORB-DB-00003-APO 

TimeSaver Relay Base 

The TimeSaver Relay Base incorporates a singlepole 

voltage-free change-over contact for switching 

external equipment. When the detector changes 

to the alarm state, the relay is energised, causing 

the contact to change state. The contact will 

remain in this condition until the detector is reset. 

TimeSaver Relay Base ORB-RB-10004-APO 



• Low cost option 

• Grouped terminals to make wiring easy 

• Two fixing centres 

• LED alignment mark 

• Cable stripping guide 

• Detector locking mechanism 





• Continuity link for voltage testing of zone 

wiring prior to commissioning 


• Other devices continue to work during 

unauthorised removal of detectors 









ORBIS

10 28 


ORBIS 

Sav-Wire Base 

The Sav-Wire Base is designed to allow Orbis 

detectors to be used in ‘Sav-Wire’ detection and 

alarm systems. 

Sav-Wire Base ORB-SW-10005-APO 

TimeSaver Deep Base 

The TimeSaver Deep Base is a mounting base 

for Orbis products which has an increased depth 

which allows for cables to be inserted into the 

side of the product. 

TimeSaver Deep Base ORB-MB-00019-APO 

Orbis Heater Base 

The Orbis Heater base is designed to be used in 

cold climates where environmental conditions could 

result in either icing or condensation affecting the 

operation of detectors. It is recommended that 

the heater base be used in conjunction with either 

a Waterproof Base Cover or Deckhead Mounting 

Box to minimise moisture ingress. 

Orbis Heater Base ORB-HB-00020-APO 






systems. 


Ancillary devices available for the Orbis range: 






• Can be used in ‘Sav-Wire’ systems 




• Limits the risk of potential for loss of 









Backplate 45681-233 85 



Polycarbonate Deckhead Mounting Box 45681-217 84 







Series 65 to Orbis Base Adaptor ORB-BA-10008-APO 85 

Please check the Apollo website on a regular basis for up-to-date approvals information.

Series 65 incorporates well-proven 

sensing technologies together with 

advances in materials and electronics. 

Developed from the highly successful 

Series 60 range of detectors, Series 

65 includes a chip (integrated circuit) 

based on that used in XP95 analogue 

addressable detectors. 

Having a wide operating voltage of 9-33V, the Series 65 

detectors can be integrated into security systems, when used 

with a relay base. The range consists of ionisation, integrating 

ionisation and optical smoke detectors, four grades of heat 

detector and a range of bases. 

Each type of detector is available in three versions: 

• Standard 

• Flashing LED 

• Flashing LED and magnet operated test switch 

Key features of Series 65: 

• Wide operating voltage 

• Advanced electronic technology 


• Magnetic test switch option 

• Can be used on security systems 

• Electrically and mechanically compatible with Series 60 

• Proven detection performance 


SERIES 65 

Series 65 

conventional fire 

detection

10 30 


SERIES 65 

Series 65 Ionisation Smoke Detector 

The Series 65 Ionisation Smoke Detector uses a low 





Series 65 Ionisation Smoke Detector 55000-217 




with flashing LED and magnetic test switch † 


(French)* 

Series 65 Integrating Ionisation 

Smoke Detector 

Ionisation detectors use a low activity radioactive 

foil to detect fires by irradiating the air in the 

smoke chambers and causing a current flow. 

If smoke enters the chamber, the current flow 

is reduced leading to an alarm. Circuitry in the 

integrating Ionisation Smoke Detector protects 

against transient levels of smoke above the 

normal threshold for up to 20 seconds. 

Series 65 Integrating Ionisation 55000-220 



Smoke Detector with flashing LED † 


Smoke Detector with flashing LED 

and magnetic test switch † 

Series 65 Optical Smoke Detector 

The Series 65 Optical Smoke Detector incorporates 

a pulsing LED located within the housing of the 

detector. The external detector moulding is 

identical to that of the ionisation detector but has 

an indicator LED which is clear in quiescent state 

but produces red light in alarm. 

Series 65 Optical Smoke Detector 55000-317 



Series 65 Optical Smoke Detector with 55000-315 

flashing LED and magnetic test switch † 


(French)* 



* Does not have LPCB or VdS approval 

• Responds well to fast burning, flaming fires 


environments 


• Flashing LED and magnet operated test 

switch option 


• Designed to operate in environments where 

transient levels of smoke may be expected 



switch option 


fires 





switch option

Series 65 Heat Detector 

The Series 65 Heat Detector monitors temperature 

by using a dual thermistor network which provides 

a voltage output proportional to the external air 

temperature. There are 12 heat detectors in the 

Series 65 range designed to suit a wide variety of 

operating conditions. 

Series 65 Heat Detector 

Rate-of-Rise, MAT 50°C, MSRT 65°C 

A1R - Standard 55000-122 

A1R - flashing LED † 55000-121 

A1R - flashing LED and magnetic test † 55000-120 

Rate of Rise, MAT 65°C, MSRT 85°C 

BR - Standard 55000-127 

BR - flashing LED † 55000-126 

BR - flashing LED and magnetic test † 55000-125 

Rate-of-Rise, MAT 80°C, MSRT 100°C 

CR - Standard 55000-132 

CR - flashing LED † 55000-131 

CR - flashing LED and magnetic test † 55000-130 

Static, MAT 80°C, MSRT 100°C 

CS - Standard 55000-137 

CS - flashing LED † 55000-136 

CS - flashing LED and magnetic test † 55000-135 


MSRT (Maximum Static Response Temperature) 

Series 65 Standard Base 

The Series 65 Standard Base has been designed 

to enable detectors to be fitted without the 

need of force – particularly useful when fitting 

to suspended ceilings. All Series 65 bases have 

a ‘one way only’ fit. They can be locked into 

place by a grub screw using a 1.5mm hexagonal 

screwdriver - part number 29600-095. 

Series 65 Standard Base 45681-200 

Series 65 Diode Base 

The Series 65 Diode Base is designed for use with 

conventional systems that have manual call points 

and detector bases on the same circuit. The base 

is fitted with a schottky diode on the “L1 IN” and 

“L1 OUT” wiring terminals. This base can only be 

used with compatible control equipment. 

Series 65 Diode Base 45681-201 




SERIES 65 



• Ideal environments that are dirty or smoky 




switch option 



• Easy to wire 

• Contains an earth connector 

• Contains no electrical parts 





• Continues to work during unauthorised 

removal of detectors

10 32 


SERIES 65 

Series 65 Sav-Wire Base 

The Series 65 Sav-Wire Base is designed to allow 

Series 65 detectors to be used in ‘Sav-Wire’ 

detection and alarm systems. 

Series 65 Sav-Wire Base 45681-206 

Series 65 Standard Relay Base 

The Series 65 Standard Relay Base provides one 

set of volt-free, changeover (form C) contacts that 

change state when the detector signals an alarm. 

Series 65 Standard Relay Base 45681-245 

Series 65 Auxiliary Relay Base 

The Series 65 Auxiliary Relay Base provides two 

sets of volt-free changeover contacts to facilitate 

the switching of a remote LED or other auxiliary 

device. 

Series 65 Auxiliary Relay Base 45681-246 

Series 65 End-of-Line Relay Base 

The Series 65 End-of-Line (EOL) Relay Base is 

intended for use with 4-wire circuits and features 

two sets of changeover contacts and a power 

supervision relay. 

Series 65 End-of-Line Relay Base 12V 45681-247 

Series 65 End-of-Line Relay Base 24V 45681-248 

Series 65 12V Relay Base 

The Series 65 12V Relay Base is designed for use 

in both fire and security systems. For fire systems 

a jumper on the PCB is fitted to a ‘latching’ 

position. For security systems the jumper is 

moved to another position so that the base is 

non-latching. 

Series 65 12V Relay Base 45681-508 






• Detects the removal of a detector head and 

reports a fault 

















• Can be used in fire and security systems




systems. 


Ancillary devices available for the Series 65 range: 


SERIES 65 







Backplate 45681-233 85 

Series 65 Base Cover 45681-370 83 









Series 65 Sounder Base 45681-512 57 

Series 65 Sounder Base with diode 45681-513 57 


10 34 

Two-Wire Technology 

Two-Wire 

Technology 

In conventional systems, detectors are hard wired 

into a circuit or zone. They signal a fire condition 

to a control panel by changing from a high to low 

impedance. The panel detects this impedance 

change by current monitoring and identifies the 

zone. Individual detectors cannot be identified. In 

two-wire conventional systems, fire detection and 

alarm products are connected to the same pair 

of supply wires, making installation quicker, less 

expensive and more flexible than traditional fourwire 

systems. Two-wire systems are particularly 

well suited for small to medium sized buildings.

AlarmSense has been developed to 

make the design and installation of a 

fire detection and alarm system easier 

and more economic for small to medium 

sized buildings. The range also allows 

an existing system to be extended or 

modified if necessary. This flexibility 

makes AlarmSense an excellent choice 

for use in HMOs. 

The AlarmSense range incorporates a number of technologically 

advanced features such as patented RemovAlert which 

alerts the control panel if a detector has been removed 

without authorisation. 

The entire AlarmSense range has been designed to enable 

compliance with BS5839-1 and BS5839-6 in addition to EN54 

standards. AlarmSense is also compliant with the Construction 

Products Directive (CPD). 

Key features of AlarmSense include: 

• Patented RemovAlert head removal monitoring 

• Local and general alarm switching 

• Reduced wiring costs 

• Quick and simple installation 

• False alarm reduction with ‘non-priority’ signalling 

• Flexible system design 

• Failsafe operation of manual call points 

• Detectors and call point alarms identifiable separately 

Two-Wire Technology 11 35 

ALARMSENSE 

AlarmSense 

two-wire 

technology

10 36 


ALARMSENSE 

AlarmSense Optical Smoke Detector 

The AlarmSense Optical Smoke Detector works 

using the light scatter principle. The detector 

changes to alarm state at a pre-set threshold of 

smoke penetration into the sensing chamber. 

AlarmSense Optical Smoke Detector 55000-390 

AlarmSense Integrating Optical 


The AlarmSense Integrating Optical Smoke 

Detector works using the light scatter principle. 

The detector changes to alarm state at a pre-set 

threshold of smoke penetration into the sensing 

chamber. The detector also has the ability to 

monitor and discard transient sources of smoke. 

AlarmSense Integrating 55000-391 

Optical Smoke Detector 

AlarmSense Heat Detector 

There are two heat detectors in the AlarmSense 

range designed to suit a wide variety of operating 

conditions. A static heat detector (CS) which 

responds only when a fixed temperature has been 

reached and a rate-of-rise detector (A1R) which 

has a fixed upper limit, but in addition, measures 

the rate of increase in temperature. 

AlarmSense Heat Detector A1R 55000-190 

AlarmSense Heat Detector CS 55000-193 

AlarmSense Base 

AlarmSense detectors can only be mounted into 

the AlarmSense Base. The base is used for installing 

detectors that do not require an integral sounder or 

sounder beacon. 

AlarmSense Base 45681-244 





• Reduces false alarms 






• Designed to operate in environments where 

transient levels of smoke may be expected 






• CS detectors are ideal for use in environments 

with rapid temperature fluctuations such as 

boiler rooms 

• Reduction of false alarms 






removal of detectors 

• Quick and simple installation

AlarmSense Alarm Relay 

The AlarmSense Alarm Relay enables devices such 

as beacons, pillow/bed alarms and radio vibrating or 

paging devices to be connected to the fire detection 

system. This allows the system to comply with the 

requirements of the DDA. 

AlarmSense Alarm Relay 55000-835 




systems. 

MiniDisc Remote indicator 53832-070 

AlarmSense Manual Call Point 

The AlarmSense Manual Call Point is compliant 

with EN54:11. It is different from other 

conventional call points in that it can be detected 

as an operated call point rather than a detector 

that has changed to the alarm state. 

AlarmSense Manual Call Point 55100-894 

(Surface) 

AlarmSense Sounder Base 

The AlarmSense Sounder Base can only be 

used with AlarmSense detectors. It is fitted with 

electronic circuitry to monitor the presence of 

detectors and signals any unauthorised removal 

of detector heads. It is supplied with a high or low 

volume setting and red or white caps are available 

for stand-alone installation 

AlarmSense Sounder Base LR 45681-341 

AlarmSense Sounder Base 45681-510 

Red Cap 45681-295 

White Cap 45681-294 

AlarmSense Sounder Beacon Base 

The AlarmSense Sounder Beacon Base is designed 

to be used with AlarmSense detectors only. 

AlarmSense Sounder Beacon Base LR 45681-340 

AlarmSense Sounder Beacon Base 45681-509 

Red Cap 45681-295 




• Ensures DDA compliance 

ALARMSENSE 





• Gives immediate response 

• Unique identification signalling 

• Resettable element 






• Provides audible signal and detection at 

one point 

• High and low volume ranges 

• Sounder range between 70dB(A) and 87dB(A) 





• Quick and simple installation

10 38 


ALARMSENSE 

Ancillary devices available for the AlarmSense range: 



Backplate 45681-233 83 






Deckhead Adaptor PG16 - M20 27249-005 84 





AlarmSense Manual Call Point (Surface) 55100-894 80 

AlarmSense Manual Call Point (Flush) 55100-893 80 


AlarmSense Sounder Base LR 45681-341 57 

AlarmSense Sounder Base 45681-510 57 

AlarmSense Sounder Beacon Base LR 45681-340 65 

AlarmSense Sounder Beacon Base 45681-509 65 

White Cap 45681-294 65 

Red Cap 45681-295 65 

Apollo makes ordering AlarmSense products for a project easy with a 

selection of detector/sounder base or detector/sounder beacon base 

packages. See pages 57 and 65 for a description of the AlarmSense 

Sounder Base and Sounder Beacon Base. 

Sounder Base Combination Part Number 

With Optical Smoke Detector 55000-392 

With Integrating Optical Smoke Detector 55000-393 

With A1R Heat Detector 55000-196 

With CS Heat Detector 55000-197 

Sounder Beacon Base Combination Part Number 

With Optical Smoke Detector 55000-394 

With Integrating Optical Smoke Detector 55000-395 

With A1R Heat Detector 55000-198 

With CS Heat Detector 55000-199


ALARMSENSE

10 40 

Wireless Technology 

Wireless 

Technology 

Traditionally, fire detection systems in industrial 

and commercial applications have used hard wired 

installations. These systems are generally installed 

at the time of construction or refurbishment, 

making the laying of cables less of an issue. Certain 

applications do not lend themselves to this approach, 

such as occupied buildings, heritage sites, palaces, 

annexes etc. - this is where wireless systems 

provide the ideal solution.

XPander is a system in which individual 

detectors, call points and alarm devices 

communicate with the XP95 loop by 

radio signals. An interface is connected 

to the loop in the same way as any other 

interface, such as an input/output unit. 

Every XPander device is assigned an address and this 

address is recognised by the control panel in the same 

way as the address of any other device connected directly 

to the loop wiring. The XPander range benefits from the 

patented XPERT technology that is also used in Discovery 

and XP95. See page 23 for more details. 

XPander can be incorporated into fire detection systems in 

stately homes and architecturally sensitive buildings where 

the use of fire cables is either impractical or undesirable. 

Key features of XPander include: 

• Easy to install 


• Self-monitoring 

• Proven technology 

• No special control panel needed 

• 868MHz radio channels 

• Up to 15 devices per interface 

• Up to 5 interfaces per loop 

All detectors within the XPander range are sold with 

mounting bases. 

Please ensure that you have attended an approved XPander 

training course prior to purchasing products from the 

XPander range. 

A site survey tool must be included in the first order of 

XPander products as a site survey must be carried out prior 

to installation. 

Wireless Technology 11 41 

XPANDER 

XPander 

wireless technology

10 42 

Wireless Technology 

XPANDER 

XPander Optical Smoke Detector 

and Mounting Base 

The XPander Optical Smoke Detector works on the 

light scatter principle and is ideal for applications 

where slow-burning or smouldering fires are likely. 

XPander Optical Smoke Detector 

and Mounting Base XPA-CB-12034-APO 

XPander Multisensor Detector and 

Mounting Base 

The XPander Multisensor Detector contains 

an optical smoke sensor and a thermistor 

temperature sensor whose outputs are combined 

to give the final analogue value. 

XPander Multisensor Detector 

and Mounting Base XPA-CB-13032-APO 

XPander Heat Detector and 

Mounting Base 

There are two heat detectors in the XPander 

range designed to suit a wide variety of operating 

conditions. A static heat detector (CS) which 

responds only when a fixed temperature has been 

reached and a rate-of-rise detector (A1R) which 

has a fixed upper limit, but in addition, measures 

the rate of increase in temperature. 

XPander Heat Detector and Mounting Base 

Rate-of-Rise (A1R) XPA-CB-11170-APO 

Static (CS) XPA-CB-11171-APO 



fires 


• Modified to function with the low current 

requirements of radio systems 

• Bi-directional (monitored) radio platform 


• Powered by two independent packs of 3 AA 

alkaline batteries with a typical three year life 



bedrooms 






alkaline batteries with a typical three year life 

• Can be used in applications where smoke 




• CS detectors are ideal for use in environments 

with rapid temperature fluctuations such as 

boiler rooms 






alkaline batteries with a typical three year life

XPander Loop Interface 

The XPander Loop Interface communicates 

between the Intelligent control panel and the 

XPander detectors as the detectors alone can’t 

communicate directly with the panel. 

XPander Interface Unit XPA-IN-14007-APO 

XPander Survey Tool 

The XPander Survey Tool is used at the site 

survey stage to ascertain if a site is suitable for an 

XPander installation. A site survey must be carried 

out before XPander can be installed. 

XPander Survey Tool XPA-TE-14010-APO 

Ancillary devices available for the XPander range: 

Wireless Technology 11 43 

• Tests for radio signal strength 

XPANDER 

• Connects up to 15 XPander devices to a 

XP95 loop 

• Translates radio signals from XPander 

detectors to the control panel 

• Incorporates an integral loop isolator and is 

polarity sensitive 

There are two aerials available to complement the XPander range: 

• XPander External Aerial (XPA-AE-14008-APO) which is used to strengthen the radio signals 

sent between the XPander Interface Unit and XPander devices. 

• XPander External Directional Aerial (XPA-AE-14009-APO) which is used to pick up radio signals 

from outbuildings and annexes. 


XPander Manual Call Point XPA-MC-14006-APO 80 

XPander Sounder and Sounder Base Red XPA-CB-14001-APO 54 

XPander Sounder and Sounder Base White XPA-CB-14002-APO 54 

XPander Red Sounder Beacon and Red Sounder Base XPA-CB-14003-APO 63 

XPander Amber Sounder Beacon and White Sounder Base XPA-CB-14004-APO 63 

XPander Clear Sounder Beacon and White Sounder Base XPA-CB-14005-APO 63 

XPander Blank XPERT Card (White) 29600-413 

XPander Blank XPERT Card (Red) 29600-399 

XPander XPERT cards are not interchangeable with those used with Discovery and XP95. 

XPander Sounder and 

Sounder Base Red 

XPA-CB-14001-APO 

XPander Red Sounder Beacon 

and Red Sounder Base 

XPA-CB-14003-APO 


XPander Manual Call Point 

XPA-MC-14006-APO

44 


Specialist 

Detectors 

In addition to standard detectors, Apollo offer a 

range of specialist detectors suitable for a wide 

variety of applications.

Flame detectors are effective in 

protecting areas where flaming fires 

may be expected. 

There is a choice of detection 

techniques - Ultra Violet and Infra-red, 

or a combination of both. 

UV Flame Detectors are generally 

used in engine rooms, factories and 

warehouse applications. 

Infra-red Flame Detectors are able to 

tolerate dirtier environments which 

may block UV radiation and are 

generally used in applications such as 

waste handling, colour printing and 

paper manufacturing. 

Specialist Detectors 45 

FLAME DETECTORS 

Flame 

Detectors 

specialist detectors

46 



Intelligent Dual IR Flame Detector 

The Intelligent Dual Infra-Red (IR²) Flame Detector 

is designed for use in areas where flaming fires 

may be expected. The detector has two sensors 

which respond to different IR wavelengths to 

discriminate between flames and spurious sources 

of radiation. Applications include aircraft hangars, 

coal handling and paper manufacturing plants and 

woodworking environments. 

Intelligent IR² Flame Detector 55000-280 

Intelligent Flameproof IR² 

Flame Detector 

55000-295 

Intelligent Triple IR Flame Detector 

The Intelligent Triple IR Flame Detector (IR³) is 

designed to protect areas where open flaming 

fires may be expected. It is sensitive to lowfrequency, 

flickering infra-red radiation emitted by 

flames during combustion. 

Intelligent IR³ Flame Detector 55000-020 

Intelligent Flameproof IR³ Flame 

Detector 

55000-021 

Flame Detector Bracket 

The Flame Detector Bracket is an optional accessory 

for the Intelligent Flame Detectors. It is a stainless 

steel mounting bracket adjustable in two axis. Not 

suitable for Base Mounted Flame Detectors 

Flame Detector Bracket 29600-203 

Flame Detector Weather Shield 

The Flame Detector Weather Shield protects the 

device from inclement conditions. 

Flame Detector Weather Shield 29600-206 


• Sensitive to flickering IR radiation 

• Detects through films of oil, dust, water 

and ice 

• Responds to flickering flames, including 

those invisible to the naked eye 

• Compatible with Discovery and XP95 protocols 

• Remote optical self-test function 

• 90° field of view 

• Up to 40m coverage 

• Loop-powered 

• Sensitive to flickering IR radiation 

• Detects through films of oil, dust, water 

and ice 

• Responds to flickering flames, including those 

invisible to the naked eye 

• False alarms due to lighting or flickering 

sunlight are minimised 


• Allows flame detector to be moved to desired 

position 

• Protects against water ingress 

• Protects sensor from direct sunlight

Intelligent Base Mounted UV Flame 

Detector 

The Intelligent Base Mounted UV Flame Detector 

is designed to protect internal areas where open 

fires may be expected. The detector has a single 

UV sensor with a narrow spectral response in 

order to discriminate between flames and most 

spurious sources of radiation. 

Intelligent Base Mounted UV Flame 55000-022 

Detector 

Base Mounted Flame Detector Bracket 29600-458 

Intelligent Base Mounted UV IR² 


The Intelligent Base Mounted UV IR² Flame 

Detector is designed to protect areas where open 

flaming fires may be expected. The detector has 

a UV and dual IR sensors responding to different 

wavelengths in order to discriminate between 

flames and spurious sources of radiation. 

Intelligent Base Mounted UV IR² 55000-023 



Intelligent Base Mounted IR³ Flame 

Detector 

The Intelligent Base Mounted IR³ Flame Detector 

is designed to protect areas where open flaming 

fires may be expected. The detector has three IR 

sensors that respond to different IR wavelengths 

in order to discriminate between flames and 

spurious sources of radiation. 

Intelligent Base Mounted IR³ 55000-024 



Ancillary products: 



• Responds to stationary flames with no flicker 

• Sensitive to UV radiation emitted by flames 

during combustion 

• Compact flame detector which can fit into 

Discovery or XP95 bases 



• Sensitive to UV and low-frequency flickering IR 

radiation emitted by flames during combustion 




• False alarms due to electrical discharges from 

lightning or arc welding and flickering sunlight 

are minimised 


• Sensitive to low-frequency flickering 

IR radiation emitted by flames during 

combustion. 




• False alarms due to factors such as flickering 

sunlight are avoided by a combination of filters 

and signal processing techniques. 


Flame Sensor Test Unit and Case 29600-226 117 


48 


BEAM DETECTORS 

Beam 

Detectors 

specialist detectors 

Beam detectors are designed to 

protect large open spaces such as atria, 

museums, churches and warehouses.

Optical Beam Detector 

The conventional beam detector is made up of 

three parts: the transmitter, which projects a beam 

of infra-red light, the receiver, which registers 

the light and produces an electric signal, and the 

interface, which processes the signal and generates 

alarm or fault signals. 

Optical Beam Detector 29600-242 

Intelligent Reflective Beam Detector 

The Intelligent Reflective Beam Detector differs 

from a traditional beam detector in that it is a single 

unit which houses a transmitter, a receiver and the 

control electronics. The beam detector is available in 

two versions: a single reflector model for distances 

of 5-50m and a four-reflector unit for distances of 

50-100m. 

Intelligent Reflective Beam 55000-268 

Detector 5-50m 

Intelligent Reflective Beam 55000-273 


Reflective Beam Detector Backbox 

The Reflective Beam Detector Backbox allows easy 

first fixing of the cabling and terminations to the 

Intelligent Reflective Beam Detector (55000-268 & 

58000-273). The backbox can be surface or flush 

mounted. 

Reflective Beam Detector Backbox 29600-241 

Firebeam ® 

Firebeam is a reflective beam smoke detector 

which is designed to protect large open spaces. It 

incorporates a motorised head that can align itself 

during commissioning. 

Firebeam Reflective Beam 


29600-350 

Firebeam Extension Kit 40-80m 29600-351 

Firebeam Extension Kit 80-100m 29600-352 

Firebeam Adaptor Plate 29600-353 


Firebeam ® is a registered trade mark of The Fire Beam Company 


BEAM DETECTORS 

• Three selectable sensitivity levels 

• Drift compensation 

• Remote low interface 

• Simple wiring and alignment 

• Use XP95 Switch Monitor (55000-843) to 

interface it to an addressable loop. 



• Incorporates a short-circuit isolator 

• Automatic drift compensation 

• Automatic reset following alarm or fault 

condition 

• Aesthetically pleasing 

• Continually corrects itself against building 

movement 

• Controlled and adjusted from ground level

50 


DUCT DETECTORS 

Duct 

Detectors 

specialist detectors

Intelligent Duct Smoke Detector 

The Intelligent Duct Smoke Detector provides early 

detection of smoke in the air moving through 

heating and ventilation (HVAC) ducts in commercial 

and industrial premises. Its purpose is to prevent the 

re-circulation of smoke from an area on fire to areas 

unaffected by the fire. 

Intelligent Duct Smoke Detector 53546-022 

Conventional Duct Smoke Detector 

The Conventional Duct Smoke Detector provides 

early detection of smoke in the air moving through 

heating and ventilation (HVAC) ducts in commercial 

and industrial premises. Its purpose is to prevent the 

re-circulation of smoke from an area on fire to areas 

unaffected by the fire. 

Conventional Duct Smoke Detector 53546-021 

Orbis Duct Detector 

The Orbis Duct Detector provides early detection 

of smoke in the air moving through heating and 

ventilation (HVAC) ducts. 

Orbis Duct Detector 53546-023 

Extension Tubes 


DUCT DETECTORS 

• Operates in air speeds of 0.5m/s to 20m/s 

• Transparent cover to view detector head LED 

• Integral smoke test port 

• For S65 and S60 ranges 

• Operates in air speeds of 0.5m/s to 20m/s 

• Transparent cover to view detector head LED 

• Integral smoke test port 

• Designed to accept an Orbis detector head 

• Used as supplementary detection 


300-750mm 53541-170 

750-1500mm 53541-171 

1500-3000mm 53541-172 


10 52 


Audio 

Visual 

Signalling 

Apollo offer a wide range of Audio Visual (AV) 

signalling devices – sounders, beacons, sounder 

beacons and sounder beacon bases for use in 

conjunction with their range of conventional and 

intelligent detectors to meet the requirements of 

the DDA.

Audio Visual Signalling 53 

SOUNDERS 

Sounders 

audio visual signalling

54 


SOUNDERS 

Intelligent Open-Area Sounder 

The Intelligent Open-Area Sounder has been 

designed for use in open areas and can be 

connected to any Discovery or XP95 system. 

Intelligent Open-Area Sounder 55000-001 

Red 


White 

Intelligent 100dB(A) Open-Area 

Sounder 

The 100dB(A) Loop-Powered Sounder is designed 

for use in open areas and can be connected to any 

Discovery or XP95 system. 

Intelligent 100dB(A) Open-Area 55000-278 

Sounder Red 


Sounder White 


Sounder Slow Whoop Red 


Sounder Slow Whoop White 

Intelligent Weatherproof 100dB(A) 

Open-Area Sounder 

The 100dB(A) Weatherproof Sounder is designed 

for use in open areas and can be connected to any 

Discovery or XP95 system. The sounder comprises 

a backbox and sounder unit supplied together. 

100dB(A) Weatherproof Sounder 55000-274 

Red 

100dB(A) Weatherproof Sounder 55000-275 

White 

XPander Sounder and 

Sounder Base 

The XPander Sounder and Sounder Base is 

wireless and designed to be used with XPander 

detectors and manual call points only. 

XPander Sounder and XPA-CB-14001-APO 

Sounder Base Red 

XPander Sounder and XPA-CB-14002-APO 

Sounder Base White 


• Self-test fault monitoring 

• Choice of tones 

• Group addressing and synchronisation of alarm 

• Weatherproof IP65 

• Comes with Isolating Base as standard 

• Loop powered 

• Output is 100 dB(A) at 90º 

• Ceiling Mounted 

• Output is 100dB(A) at 90° 

• Current consumption of 5.0mA 

• Can be synchronised 

• Group address facility 


• Wall mounted 

• IP 66 (immune to the affects of wind and 

precipitation) 

• Output is 100dB(A) at 90° 

• Current consumption of 5.0mA 

• Can be synchronised 

• Group address facility 




• Wireless 

• Eliminates cable problems 

• Output is between 92 and 106db(A) at 1m - 

dependent on tone setting


BASE SOUNDERS 

Base 

Sounders 


56 


BASE SOUNDERS 

Integrated Base Sounder 

The Integrated Base Sounder comprises a base 

sounder with integral mounting base and is for 

use with Discovery or XP95 ranges. It is designed 

for use in enclosed areas. 

Integrated Base Sounder † 45681-278 


with Isolator † 

45681-277 


Slow Whoop † 

45681-291 


Slow Whoop with Isolator † 

45681-290 


DIN-Tone with Isolator 

45681-300 

Red Cap* 45681-293 

White Cap* 45681-292 

Intelligent Base Sounder 

The Intelligent Base Sounder is for use with 

Discovery or XP95 ranges. It is a loop-powered 

sounder used to signal a fire alarm in enclosed 

areas. A Discovery or XP95 Mounting Base must 

be fitted to the Base Sounder, if a detector is to be 

fitted. 

Intelligent Base Sounder 45681-265 

Intelligent Base Sounder, for use 

with Isolating Base 

45681-266 

Intelligent Base Sounder 

Slow Whoop 

45681-267 

Intelligent Base Sounder Slow 

Whoop, for use with Isolating Base 

45681-268 

Red Cap* 29600-257 

White Cap* 29600-256 

Ancillary Base Sounder 

The Ancillary Base Sounder is a local-area sounder 

designed for indoor use. It can be connected only 

to detection systems using Discovery or XP95 

detectors and control panels with appropriate 

software. 

Ancillary Base Sounder 45681-276 



* Does not have CPD or VdS approval 

• Two tone ranges 

• Synchronisation of ‘alert’ and ‘evacuate’ tones 

• Individual and group addressing 

• Unique acoustic self-test 

• Integrated base 

• Isolator option 

• Synchronisation of continuous and pulsed 

tones 

• Multiple address allocation via master/slave 

configuration 


• Choice of two output levels 

• Guaranteed sound output of 85dB(A) at 1 

metre 

• Current consumption of only 3mA 


• Responds to signals from the associated 

detector - does not have an address of its own 

• Adjustable volume control

Series 65 Sounder Base 

The Series 65 Sounder Base is a high-efficiency 

conventional alarm sounder incorporating a base 

for the Series 65 range of detectors. It is designed 

so that separate detector and sounder circuits can 

be connected. The sounder base can be secured 

to a conduit box or surface mounted. 

Series 65 Sounder Base 45681-512 

Series 65 Sounder Base with diode 45681-513 

AlarmSense Sounder Base 

The AlarmSense Sounder Base can only be 

used with AlarmSense detectors. It is fitted with 

electronic circuitry to monitor the presence of 

detectors and signals any unauthorised removal 

of detector heads. It is supplied with a high or low 

volume setting and red or white caps are available 

for stand-alone installation 

AlarmSense Sounder Base LR 45681-341 

AlarmSense Sounder Base 45681-510 

Red Cap 45681-295 




BASE SOUNDERS 

• 32 tones as standard 

• Provides detection and alarm signal at one 

point 

• Diode option 






• Provides audible signal and detection at 

one point 

• High and low volume ranges

58 


BEACONS 

Beacons 


Intelligent Open-Area Beacon 

The Intelligent Open-Area Beacon has been 

developed for use in situations where there is a risk 

that sounders will not be heard. It is weatherproof 

and can be used outside. 

Intelligent Open-Area Beacon 55000-009 

Red Lens 

Intelligent Open-Area Beacon 55000-010 

Clear Lens 

Loop-Powered Beacon 

The Loop-Powered Beacon is a local-area beacon 

designed for indoor use. The beacon has been 

developed as a supplement to sounders for use in 

situations where there is a risk that sounders will 

not be heard. 

Loop-Powered Beacon Red 55000-877 

Loop Powered Beacon Amber 

Loop Powered Beacon 

55000-879 

Clear Lens/Red Flash 55000-878 

Beacon Enclosure 

The Beacon Enclosure is weatherproof and allows 

Apollo’s loop-powered beacon to be used in highmoisture 

environments such as swimming pools 

and food processing areas where wash-down 

occurs. The enclosure is supplied with a mounting 

bracket to accept a Discovery or XP95 base. 

Beacon Enclosure 29600-318 




• Weatherproof IP65 

• Group addressing 

• Synchronisation of alarm 



• High intensity LEDs 

• More reliable than xenon beacons 

• Automatic LED check 

• Lockable 

• Wide angle of visibility 

• Enables DDA compliance 

• Synchronised flash 

• Can be used with Discovery or XP95 


• Allows beacon to be used outdoors 

• Accepts MiniDisc Remote Indicator 

• IP67 

BEACONS

60 


BEACON BASES 

Beacon 

Bases 


Loop-Powered Beacon Base 

The Beacon Base is a loop-powered beacon 

combined with a standard Intelligent Mounting 

Base. It is used to signal a fire alarm in enclosed 

areas. The beacon base can be used with either a 

detector fitted or with a cap as a stand-alone alarm 

device. 


with Isolator 

45681-333 


with Standard Flash 

45681-335 


with Australian Flash 

45681-337 


Red Cap 45681-293 



BEACON BASES 

• Beacon flash rate of once per second 

• Synchronisation of beacon flash 


• Unique beacon self-test 


• Isolator option

62 


SOUNDER BEACONS 

Sounder 

Beacons 


Intelligent Open-Area Sounder Beacon 

The Intelligent Open-Area Sounder Beacon 

is designed for use in open areas and can be 

connected to an Apollo intelligent system. 


Beacon Red Lens 


Beacon Clear Lens 

Multi-Tone Open-Area Sounder Beacon 

The Multi-Tone Open-Area Sounder Beacon is 

designed for use in indoor open areas and can be 

connected to any Discovery or XP95 system. The 

sounder beacon complements Apollo’s intelligent 

and integrated base sounders as well as the loop 

powered 100dB(A) sounder. 

Multi-Tone Open Area Sounder 55000-293 

Beacon Red with Isolator † 


Beacon White with Isolator † 


Beacon Red 


Beacon White † 

Weatherproof Multi-Tone Open Area 

Sounder Beacon 

The Weatherproof Multi-Tone Open Area Sounder 

Beacon is designed for use in outdoor open 

areas and can be connected to any Discovery or 

XP95 system. The sounder beacon complements 

Apollo’s intelligent and integrated base sounders 

as well as the loop powered 100dB(A) sounder. 

Weatherproof Multi-Tone Open Area 55000-298 

Sounder Beacon Red with Isolator 


Sounder Beacon White with Isolator 


Sounder Beacon Red 


Sounder Beacon White 

XPander Sounder Beacon and 

Sounder Base 

The XPander Sounder Beacon and Sounder Base 

is wireless and designed to be used with XPander 

detectors and manual call points only. 

XPander Red Sounder XPA-CB-14003-APO 

Beacon and Red Sounder Base 

XPander Amber Sounder XPA-CB-14004-APO 

Beacon and White Sounder Base 

XPander Clear Sounder XPA-CB-14005-APO 

Beacon and White Sounder Base 


† Does not have CPD approval 


SOUNDER BEACONS 

• IP65 weatherproof 

• Gives two functions at one point 


• Choice of tones 

• Group addressing and synchronisation of alarm 



• Powerful LED combined with 100dB(A) sound 

output 

• Two volume settings 



• Three tone choices 



• IP66 (immune to the affects of wind and 

precipitation) 

• Powerful LEDs combined with 100dB(A) sound 

output 

• Two volume settings 



• Three tone choices 



• Wireless 

• Eliminates cable problems 

• Enables DDA compliance

64 


SOUNDER BEACON BASES 

Sounder 

Beacon 

Bases 


Sounder Beacon Base 

The Sounder Beacon Base is a loop-powered 

sounder and beacon combined with a standard 

Intelligent Mounting Base. It is used to signal a 

fire alarm in enclosed areas. The Sounder Beacon 

Base can be used either with a detector fitted or 

with a cap for operation as a stand-alone alarm 

device. 

Sounder Beacon Base with Isolator † 45681-330 

Sounder Beacon Base † 45681-331 

Sounder Beacon Base 45681-336 

with Australian Tone † 

Sounder Beacon Base with NZ Tone † 45681-338 

Sounder Beacon Base Slow Whoop 45681-332 

with Isolator † 


with Isolator DIN-Tone 

White Cap †‡ 45681-292 

Red Cap †‡ 45681-293 

AlarmSense Sounder Beacon Base 

The AlarmSense Sounder Beacon Base is designed 

to be used with AlarmSense detectors only. 

AlarmSense Sounder Beacon Base LR 45681-340 

AlarmSense Sounder Beacon Base 45681-509 

Red Cap 45681-295 


Discovery Sounder 

Beacon Base 

The Discovery Sounder Beacon Base makes 

full use of the Discovery protocol. For ease of 

commissioning a ‘magnetic wand’ can be used to 

test and adjust each sounder locally. 

Discovery Sounder Beacon Base 45681-393 



‡ Does not have CPD approval 


SOUNDER BEACON BASES 

• Two volume ranges 55-75dB(A) and 

75-91dB(A) 

• Beacon flash rate of once per second 


• Synchronisation of beacon flash 


• Unique acoustic and beacon self test 


• Sounder range between 70dB(A) and 87dB(A) 






• It is possible to set individual control of the 

sounder and beacon 

• Volume and tone settings can be selected 

from the control panel 

• Tones can be used for other purposes in 

addition to warning of fire, ideal for schools 

• Enables soft start option, ideal for hospitals 

and nursing homes 

• Electronic bell tone

66 


AV ACCESSORIES 

Audio 

Visual 

Accessories 



The Beacon Enclosure is weatherproof allowing 

a loop-powered beacon to be installed outside 

and in high moisture environments such as 

swimming pools. 


Magnetic Wand 

The Magnetic Wand is used to initiate and terminate 

actions such as adjusting and setting the sound 

levels of the Discovery Sounder Beacon Base. 

Magnetic Wand 29650-001 



• Can be installed outside 

• IP 67 

AV ACCESSORIES 

• Flexibility to set sound output to desired level 

during walk test 

• Allows local testing of Discovery Sounder 

Beacon Bases 

• 1.2m when extended

68 

Interfaces 

Interfaces 

Apollo manufactures a comprehensive range of 

interfaces for intelligent systems which enable fire 

protection systems to be engineered simply and 

effectively without the need for custom-designed 

equipment. There are a variety of interfaces 

available to suit a number of individual applications.

Standard Interfaces are fitted with 

bi-directional short-circuit isolators so 

that they are unaffected by a single 

short circuit on either loop input or 

output. The exception to this is the 

Mains Input/Output unit which is not 

isolated. 

Key features of Apollo Interfaces: 


• Well protected 

• Modular design 

• A neat solution 

Interfaces 69 

STANDARD INTERFACES 

Standard 

Interfaces

70 

Interfaces 


Input/Output Unit 

The Input/Output unit provides a voltage 

free, double pole change-over (DPCO) relay 

output, a single monitored switch input and an 

unmonitored, non-polarised opto-coupled input. 

Input/Output Unit 55000-847 

Three Channel Input/Output Unit 

The Three Channel Input/Output Unit provides 

three voltage-free, single pole, change-over relay 

outputs and three monitored switch inputs. 

Three Channel Input/Output Unit 55000-588 

Output Unit 

The Output Unit provides a voltage-free single 

pole, change-over relay output. It is a simplified 

version of the Input/Output unit without circuitry 

for monitoring inputs. 

Output Unit 55000-849 

Sounder Control Unit 

The Sounder Control Unit is used to control the 

operation of a zone of conventional sounders and 

report their status to the control panel. 

Sounder Control Unit 55000-852 


• It can report fault, switch open and switch 

closed levels 

• Three visible LEDs 


• Voltage free 


• Supervises one or more normally-open 

switches on each of the three inputs 


• Capable of switching up to 30V at 1A on each 

of the three outputs 


• Allows sounders to be operated continuously 

or be pulsed, 1 second on, 1 second off 

• May be synchronised when in pulsed operation

Switch Monitor 

The Switch Monitor is designed to monitor the 

state of one or more single pole, volt free contacts 

connected on a single pair of cables and to report 

the status to Apollo compatible analogue control 

equipment. 

Switch Monitor 55000-843 

Switch Monitor Plus 

The Switch Monitor Plus is designed to monitor 

the state of one or more single pole, volt free 

contacts connected on a single pair of cables and 

to report the status to Apollo compatible analogue 

control equipment. 

Switch Monitor Plus 55000-841 

Zone Monitor 

The Zone Monitor powers and controls the 

operation of a zone of up to 20 Apollo Series 65 

or Orbis fire detectors from a Discovery or XP95 

Loop. 

Zone Monitor 55000-845 

Mains Switching Input/Output Unit* 

The Mains Switching Input/Output Unit provides a 

voltage-free, single pole change-over relay output 

and a monitored switch input. 

Mains Switching Input/Output Unit 55000-875 


*Not isolated 

Interfaces 71 


• Four input states - ’normal’, ’fault’, 

’pre-alarm’ and ’alarm’ 

• Two visible LEDs 


• Output for resetting a remote detector 




• Selectable alarm delay for monitoring 

flow switches 


• Visible LED 

• Supervises one or more normally-open 

switches connected to a single pair of cables 


• Capable of switching 250V AC at up to 5A

72 

Interfaces 


With the exception of the Mains Switching Input/Output Unit Apollo’s range of standard interfaces 

without Isolators has been discontinued. The alternatives are listed below. 

Comparison chart 


Without Isolator With Isolator 

Input/Output Unit 55000-818 55000-847 

Three Channel Input/Output Unit 55000-589 55000-588 

Output Unit 55000-819 55000-849 

Sounder Control Unit 55000-823 55000-852 

Switch Monitor 55000-810 55000-843 

Switch Monitor Plus 55000-809 55000-841 

Zone Monitor 55000-813 55000-845 

Mains Switching I/O Unit 55000-875 N/A 


Mini Interfaces use very compact 

enclosures for installation into other 


Interfaces 73 

MINI INTERFACES 

Mini 

Interfaces

74 

Interfaces 

MINI INTERFACES 

Mini Switch Monitor 

The New Mini Switch Monitor is an interface 

within an entirely new housing. This allows the 

unit to be fitted onto a standard 35mm DIN-Rail 

(using a twist-click motion) or mounted within 

an enclosure, for example a manual call point. It is 

designed to monitor the state of one or more single 

pole, volt free contacts connected on a single 

pair of cables and to report the status to Apollo 

compatible analogue control equipment. 

Mini Switch Monitor 55000-760 

Mini Switch Monitor with fly leads 

The Mini Switch Monitor is designed to monitor 

the state of one or more single pole, volt free 

contacts connected on a single pair 

of cables and to report the status to Apollo 



Mini Switch Monitor with fly leads 

(Interrupt) 

The Mini Switch Monitor (Interrupt) is designed to 

monitor the state of one or more single pole, volt 

free contacts connected on a single pair of cables 

and to report the status to Apollo compatible 

analogue control equipment. It can also place 

a current pulse in the ‘interrupt’ bit to signal the 

operation of a manual call point. 

Mini Switch Monitor (Interrupt) 55000-832 

*Please check the Apollo website for up-to-date approvals information. 

• Designed for use where space is limited 

• Isolated as standard 

• Interrupt/non interrupt in one unit 

• ‘Pre-alarm’ status available 

• Three, coloured LEDs, giving clear status 

indication 



• Visible LED with remote LED connection option 




• Three input states - ’normal’, ’fault’ and ’alarm’ 





• Monitors equipment where a fast response 

is required 

• Interrupt facility

Interfaces 75 

DIN-RAIL INTERFACES 

DIN-Rail Interfaces feature enclosures 

that clip to standard 35mm DIN-Rails 

or are screwed to the base of a larger 

enclosure. They enable fire system 

designers to determine the functions 

required and create multi-purpose 

DIN-Rail 

interfaces for individual sites. 

Interfaces

76 

Interfaces 


DIN-Rail Input/Output Unit 

The DIN-Rail Input/Output Unit provides a 

voltage free, single pole, change-over relay 

output, a single, monitored switch input and an 

unmonitored, non-polarised opto-coupled input. 

DIN-Rail Input/Output Unit 55000-803 

DIN-Rail Output Unit 

The DIN-Rail Output Unit provides a voltagefree 

single pole, change-over relay output. It is a 

simplified version of the Input/Output unit without 

circuitry for monitoring inputs. 

DIN-Rail Output Unit 55000-804 

DIN-Rail Switch Monitor 

The DIN-Rail Switch Monitor is designed to 




analogue control equipment. 

DIN-Rail Switch Monitor 55000-822 

NEW!! DIN-Rail Mains Input/Output Unit 

The DIN-Rail Mains Input/Output Unit provides a 

voltage-free, single pole change-over relay output 

and a monitored switch input. The Unit supervises 

one or more normally-open switches connected 

to a single pair of cables. 

DIN-Rail Mains Input/Output Unit 55000-797 

NEW!! DIN-Rail Sounder Controller 

(5 Amperes) 

The DIN-Rail Sounder Controller (5 Amperes) 

is used to control the operation of a zone of 

externally powered sounders and report their 

status to the control panel. 

DIN-Rail Sounder Controller (5 Amp) 55000-182 



closed levels 



• Voltage free 








closed levels 


• Capable of switching up to 8A at 240V AC 

• Fits a standard 35mm DIN-Rail 



• May be synchronised when in pulsed 

operation 

• An opto-coupled input is provided to monitor 

the state of the external power supply. 

• Sounders can be operated individually or in 

groups 

• Will accept a load of 5 amperes

DIN-Rail Switch Monitor Plus 

The DIN-Rail Switch Monitor Plus is designed to 




analogue control equipment. 

DIN-Rail Switch Monitor Plus 55000-821 

DIN-Rail Zone Monitor 

with Isolator 

The Zone Monitor powers and controls the 

operation of a zone of up to 20 Apollo Series 65 or 

Orbis fire detectors from a Discovery or XP95 Loop. 

DIN-Rail Zone Monitor with Isolator 55000-812 

DIN-Rail Dual Isolator 

The DIN-Rail Dual Isolator provides two 

independent Isolators which sense and isolate 

short circuits on Discovery or XP95 loops 

and spurs. 

DIN-Rail Dual Isolator 55000-802 

Mini Switch Monitor 

The Mini Switch Monitor is an interface within 

an entirely new housing. This allows the unit to 

be fitted onto a standard 35mm DIN-Rail (using 

a twist-click motion) or mounted within an 

enclosure, for example a manual call point. It is 

designed to monitor the state of one or more single 

pole, volt free contacts connected on a single 

pair of cables and to report the status to Apollo 



DIN-Rail Accessories: 

Interfaces 77 


• Output for resetting a remote detector 





• Selectable alarm delay for monitoring 

flow switches 


• Visible short circuit LED 

• Built in Isolator 


• Polarity sensitive 

• Up to 20 detectors can be installed between 

isolators 

• Allows fully isolated spurs 


• Isolated as standard 

• Interrupt/non interrupt in one unit 

• ‘Pre-alarm’ status available 

• Three, coloured LEDs, giving clear status 

indication 




DIN-Rail End Stops 27447-528 


78 


Manual 

Call Points

Discovery Manual Call Point 

The Discovery Manual Call Point is compliant 

with EN54-11. The Call Point can be addressed 

at the commissioning stage by means of a 

seven-segment DIL switch. When operated, the 

manual call point interrupts the polling cycle for 

a fast response. 

Discovery Manual Call Point 58100-910 

(Surface) 


with Isolator (Surface) 


(non-standard) 

In addition to the standard Discovery Manual 

Call Point, Apollo offer a selection of differently 

coloured call points, suitable for a variety of 

different applications. 


(Non Standard) White (Surface) 


(Non Standard) Yellow (Surface) 


(Non Standard) Blue (Surface) 


(Non Standard) Green (Surface) 

XP95 Manual Call Point 

The XP95 Manual Call Point is compliant with 

EN54-11. The address of each call point is set at the 

commissioning stage by means of a seven-segment 

DIL switch. The device features plug and play terminal 

connections and a resettable element. 

XP95 Manual Call Point 55100-905 

(Surface) 

XP95 Manual Call Point 55100-908 

with Isolator (Surface) 

Transparent Hinged Cover 

The Transparent Hinged Cover is for use with 

XP95 and Discovery Manual Call Points and can 

be fitted to add further protection against 

accidental operation. 

Transparent Hinged Cover 26729-152 


Manual Call Points 79 

MANUAL CALL POINTS 


• Plug and play terminal connections for 

fast wiring 

• Allow wiring continuity testing before fitting 

• Reports an alarm in under 0.2 seconds 




fast wiring 





fast wiring 




• Locking tag 

• Reduces risk of vandalism 

* Please note - the manual call point does not comply 

with EN54 when fitted with this cover.

80 


MANUAL CALL POINTS 

Waterproof Manual Call Point 

The Waterproof Manual Call Point has been 

designed for use outdoors and in places where 

moisture can occur. It is compliant with EN54-11 

and can be used with the XP95 and Discovery 

ranges. 

Waterproof Manual Call Point 58100-950 


with Isolator 


with Isolator (Yellow)† 

AlarmSense Manual Call Point 

The AlarmSense Manual Call Point is compliant 

with EN54:11. It is different from other 

conventional call points in that it can be detected 

as an operated call point rather than a detector 

that has changed to the alarm state. 

AlarmSense Manual Call Point 55100-894 

(Surface) 

XPander Manual Call Point 

The XPander Manual Call Point is compliant with 

EN54:11. It is wireless and is powered by two 

independent packs of 3 AA alkaline batteries 

with a typical three year life. 

XPander Manual Call Point XPA-MC-14006-APO 


† Does not have CPD approval 

• Plug and play terminal connections for fast 

wiring 



• IP 67 

• Gives immediate response 

• Unique identification signalling 


• Uses patented XPERT addressing 


• Reports an alarm in under one second



MANUAL CALL POINTS

82 


Mounting 

Accessories

Backplate 

The Backplate provides a high degree of 

protection against the ingress of water or dust 

into the back of the detector mounted directly 

onto a mounting box. When the backplate is used 

with an XP95 device, the number tab of the XPERT 

card must be snapped off and placed in one of the 

knockout slots provided in the backplate. 

Backplate 45681-233 

Base Cover 

Base Covers are available as part of the Series 65 

and XP95 ranges. 

Series 65 Base Cover 45681-370 

XP95 Base Cover 45681-380 

Conduit Box 

The Conduit Box is a versatile accessory for 

surface mounting Apollo bases. The box has 

knockouts to accept PG16 or M20 cable glands, 

conduit or mini-trunking. Self-tapping screws are 

included to fit the detector base to the conduit box. 

Conduit Box 45681-204 

Sounder Ceiling Plate 

The Sounder Ceiling Plate allows surface mounted 

cabling to be fitted to a loop powered sounder 

base. 

Sounder Ceiling Plate 45681-311 

Module Base 

The Module Base is an accessory which 

can be secured to a standard base allowing 

customers to fit their own electronics. 

Module Base 38531-822 

Mounting Accessories 83 


• Improved performance 

• Fits Discovery, XP95, Orbis, Series 65 and 

AlarmSense bases 

• Protects base when detector not in situ 




• Ease of installation 

• Ideal for use with concrete ceilings where 

drilling is not permissible 

• 5mm in depth 


MOUNTING ACCESSORIES

84 


MOUNTING ACCESSORIES 

Deckhead Mounting Boxes 

The Deckhead Mounting Box gives extra 

protection to devices to be fitted in areas where 

there is the possibility of moisture or condensation 

ingressing through the rear of the of the base. 

The new version is suitable for a wider range of 

detector bases as well as Apollo’s AV bases. 

NEW!! Deckhead Mounting Box 45681-217 

Metal Deckhead Mounting Box 29600-131 

(has access ports threaded to fit 

PG16 glands) 

Metal Deckhead Mounting Box 29600-139 

(has access ports threaded to fit 

M20 components) 

Deckhead Adaptor (for use with 27249-005 

29600-196 - converts cable glands 

from PG16 to M20) 

Ceiling Tile Mounting Box 

The Ceiling Tile Mounting Box has been designed 

to make the installation of detectors and sounders 

quick and easy prior to the fitting of a false ceiling. 

Detector and sounder bases can be fitted, wired 

and, if necessary, tested and commissioned 

before the installation of a false ceiling. 

Detector Ceiling Tile Mounting Box 45681-309 

Sounder Ceiling Tile Mounting Box 45681-310 


The Beacon Enclosure is weatherproof allowing a 

loop-powered beacon to be installed outside and 

in high moisture environments such as swimming 

pools. The enclosure is supplied with a mounting 

bracket to accept a Discovery or XP95 base. 




• Improved performance 

• Available in polycarbonate or metal 

• Polycarbonate Deckhead Mounting Box 

45681-217 also fits Apollo Audio Visual bases 

• No need for separate backbox 

• Can be used with tiles up to 25mm thick 

• Quick and easy installation 


• Allows beacon to be used outdoors 

• Accepts MiniDisc remote indicator 

• IP67

DIN-Rail Interface Enclosures 

DIN-Rail Interface Enclosures are available in two 

sizes and can be used for housing intrinsically safe 

(IS) barriers or DIN-rail mounted interfaces. A multipurpose 

label that features a section for use with 

IS systems is supplied. For non-IS systems, the 

part referring to IS can simply be removed. 

DIN-Rail Interface Enclosure (4 units) 29600-239 


1.5mm Hexagonal Driver 

The 1.5mm Hexagonal Driver is used to turn the 

locking screw fitted to Discovery, XP95 and 

Series 65 detectors. 

1.5mm Hexagonal Driver 29600-095 

Series 90 to XP95 Base Adaptor 

The XP95 Base Adaptor is designed to allow XP95 

detectors to be fitted to an existing Series 90 

base. The adaptor eliminates the need to rewire an 

existing Apollo intelligent system. 

Series 90 to XP95 Base Adaptor 45681-238 

Series 65 to Orbis Base Adaptor 

The Orbis Adaptor is designed to allow Orbis 

detectors to be fitted to an existing Series 60 or 

Series 65 base. The adaptor eliminates the need 

to rewire an existing Apollo conventional system. 

Series 65 to Orbis Base Adaptor ORB-BA-10008-APO 



MOUNTING ACCESSORIES 

• Allows multiple interfaces to be housed 

together 

• IP67 

• Allows detectors to be fitted with ease 

• Allows an existing range to be updated 

with ease 

• Eliminates the need for re-wiring 


with ease 

• Eliminates the need for re-wiring

86 

Marine 

Marine 

Apollo offer both conventional and intelligent ranges of 

smoke and heat detectors which are approved for use 

in the marine environment. These detectors operate in 

the same way and carry the same approvals as standard 

detectors but are subject to additional approvals tests, 

specific to the marine environment. 

The marine detectors are approved by the following bodies: 

• American Bureau of Shipping 

• Bureau Veritas 

• China Classification Society 

• Det Norske Veritas 

• Germanischer Lloyd 

• Lloyd’s Register of Shipping 

• Maritime and Coastguard Agency 

• Marine Marchande Française

Discovery Marine intelligent fire 

detectors are suitable for larger 

vessels. The high specification range 

has been developed to meet the 

requirements of sophisticated systems. 

Discovery gives you total reassurance 

in installations where it is necessary to 

adapt detection to different operating 

environments and where protection 

against unwanted alarms is paramount. 

Key features of Discovery Marine: 

• Approved for use in the marine environment 

• Five response modes for environmental adaptation 

• Day/Night switching for increased reliability 

• Drift compensation for false alarm reduction 

• User programmability for data retention 

• XPERT card addressing for increased security 

Marine 87 

DISCOVERY MARINE 

Discovery 

marine

88 

Marine 


Discovery Marine 

Ionisation Smoke Detector 

The Discovery Marine Ionisation Detector uses 

a low activity radioactive foil to detect fires by 

irradiating the air in the smoke chamber and 

causing a current flow. If smoke enters the 

chamber, the current flow is reduced leading 

to an alarm. 


Ionisation Smoke Detector 58000-500MAR 


Optical Smoke Detector 

The Discovery Marine Optical Smoke Detector 

works using the light scatter principle and is 

ideal for applications where slow-burning or 

smouldering fires are likely. 


Optical Smoke Detector 58000-600MAR 

Discovery Marine Heat Detector 

The Discovery Marine Heat Detector, 

distinguishable by the low airflow resistant 

case, uses a single thermistor to sense the air 

temperature around the detector. 

Discovery Marine Heat Detector 58000-400MAR 

Discovery Marine Multisensor Detector 

The Discovery Marine Multisensor detector 

comprises optical smoke and thermistor 

temperature sensors whose outputs are combined 

to give the final analogue value. As a result, 

the multisensor is useful over a wide range of 

applications and is highly immune to false alarms. 


Multisensor Detector 58000-700MAR 




environments 




fires 

• Suitable for bedrooms and escape routes 








• Ideal for a wide range of applications 

• Highly immune to false alarms 



• Rejection of transient signals

Discovery Marine Mounting Base 

All detectors in the Discovery Marine range 

are for use with the Marine Mounting Base. The 

Mounting Base is a low insertion force base with 

stainless steel contacts for the detector terminals. 

XPERT cards are supplied with all bases. 

Discovery Marine Mounting Base 45681-210MAR 

Discovery Marine Manual Call Point 

The Discovery Marine Manual Call Point has been 

approved for use in indoor marine applications 

such as cruise liners. When operated, the manual 

call point interrupts the polling cycle for a fast 

response. 

Discovery Marine Manual 58100-970MAR 

Call Point 

Discovery Marine Manual 58100-971MAR 

Call Point with Isolator 

Discovery Marine Isolator 

The Discovery Marine Isolator is placed at intervals 

on the loop and ensures that, in the case of a short 

circuit, only the section between the isolators will 

be affected. When the short circuit is removed, 

the isolators automatically restore power in the 


Discovery Marine Isolator 55000-700MAR 

Discovery Marine Isolator Base 

The Discovery Marine Isolator Base is unique and 

designed to only accept the marine isolator. 

Discovery Marine Isolator Base 45681-211MAR 


Marine 89 





removal 




technology 





• Only accepts the Marine Isolator

90 

Marine 

ORBIS MARINE 

Orbis 

marine 

Orbis Marine conventional fire detectors 

offer a wealth of features to save time, 

enhance reliability and reduce false 

alarms within the marine environment. 

These include drift compensation and 

DirtAlert ® , a feature that warns service 

engineers via a flashing yellow LED 

that detectors need maintenance; 

and patented FasTest ® , a procedure 

that takes just four seconds to test 

smoke detectors and confirm that they 

are functioning correctly. 

Key features of Orbis Marine: 

• Approved for use in marine environments 

• Modern, low-profile design 

• TImeSaver Base ® for fast installation 

• Transient rejection for false alarm reduction 

• High humidity tolerance at up to 98%RH 

• Wide operating temperature -40°C to +70°C

Orbis Marine Optical Smoke Detector 

The Orbis Marine Optical Smoke Detector operates 

on the well established light scatter principle. 

However, the sensing technology is radically 

different in design from previous optical detectors 

and significantly reduces false alarms. 

Orbis Marine Optical Smoke ORB-OP-42001-MAR 

Detector 

Orbis Marine Optical Smoke ORB-OP-42003-MAR 

Detector with flashing LED 

Orbis Marine Multisensor Detector 

The Orbis Marine Multisensor Detector benefits 

from the same false alarm reduction technology 

as the optical detector. It is a thermally enhanced 

smoke detector and so will not give an alarm 

from heat alone. 

Orbis Marine Multisensor ORB-OH-43001-MAR 


Orbis Marine Multisensor ORB-OH-43003-MAR 

Smoke Detector with flashing LED 

Orbis Marine Heat Detector 

The Orbis Marine Heat Detector uses a single 


the detector. There are twelve heat detectors in 

the Orbis Marine range designed to suit a wide 

variety of operating conditions. 

Orbis Marine Heat Detector 

A1R Standard ORB-HT-41001-MAR 

A1R with Flashing LED ORB-HT-41013-MAR 

A2S Standard ORB-HT-41002-MAR 

A2S with Flashing LED ORB-HT-41014-MAR 

BR Standard ORB-HT-41003-MAR 

BR with Flashing LED ORB-HT-41015-MAR 

BS Standard ORB-HT-41004-MAR 

BS with Flashing LED ORB-HT-41016-MAR 

CR Standard ORB-HT-41005-MAR 

CR with Flashing LED ORB-HT-41017-MAR 

CS Standard ORB-HT-41006-MAR 

CS with Flashing LED ORB-HT-41018-MAR 


Marine 91 

ORBIS MARINE 


fires 

• Performs well in detecting black and white 

smoke 

• Extra confirmation of smoke before alarm 

signal is given 

• Reduced incidents of false alarms 



• Operates over a broad voltage range of at 













• Ideal for environments that are dirty or smoky 


• Reduced incidences of false alarms 


• Flashing LED option

92 

Marine 

ORBIS MARINE 

Orbis Marine TimeSaver Base ® 

The Orbis Marine TimeSaver Base® is a 

completely new design that provides installers 

with an open working area with fixing holes 

shaped to allow a simple mounting procedure. 

Orbis Marine TimeSaver ORB-MB-00001-MAR 

Base ® 

Orbis Marine Relay Base 

The Orbis Marine Relay Base incorporates a 

single-pole voltage-free change over contact for 

switching ancillary equipment. When the detector 

changes to the alarm state, the relay is energised, 

causing the contact to change state. The contact 

will remain in this condition until the detector is 

reset. 

Orbis Marine Relay Base ORB-RB-40004-MAR 















• Detector locking mechanism


Marine 93 

ORBIS MARINE

94 

Intrinsically Safe Detectors 

Intrinsically 

Safe 

Detectors 

There are many places where an explosive mixture of air and gas or 

vapour is, or may be present continuously, intermittently or as a result of 

an accident. These are defined as hazardous areas by BS EN 60079, the 

code of practice for installation and maintenance of electrical apparatus 

in potentially explosive atmospheres. 

Hazardous areas are common in petroleum and chemical engineering 

plants and in factories processing and storing gases, solvents, paints and 

other volatile substances. 

Electrical equipment for use in these areas needs to be designed so 

that it cannot ignite an explosive mixture, not only in normal operation 

but also in fault conditions. There are a number of methods available to 

achieve this but one of the most common is intrinsic safety. 

Apollo offer both conventional and intelligent smoke and heat detector 

ranges designed to be intrinsically safe, as they meet the requirements 

of the ATEX directive.

XP95 Intrinsically Safe (IS) detectors 

are a development of the well 

established intelligent XP95 range 

from Apollo. XP95 IS detectors feature 

all the benefits of the standard range, 

but are developed specifically for use 

in hazardous areas. The addresses of 

XP95 IS detectors are set by means of 

the patented XPERT card. See page 23 

for more details. 

Intrinsically Safe 95 

XP95 IS 

XP95 IS 


Detectors

96 


XP95 IS 

XP95 IS Ionisation Smoke Detector 

The XP95 IS Ionisation Smoke Detector uses a low 





XP95 IS Ionisation Smoke Detector 55000-540 

XP95 IS Optical Smoke Detector 

The XP95 IS Optical Smoke Detector works 




XP95 IS Optical Smoke Detector 55000-640 

XP95 IS Heat Detector 

The XP95 IS Heat Detector operates by measuring 

heat levels with a single thermistor network which 

gives a count output proportional to the external air 

temperature. 

XP95 IS Heat Detector 55000-440 

XP95 IS Mounting Base 

The XP95 IS Mounting Base has been designed to 

accept only IS products. This ensures that standard 

detectors cannot inadvertently be fitted into an 

intrinsically safe system. XPERT cards are supplied 

with all bases. 

XP95 IS Mounting Base 45681-215 

XP95 IS Manual Call Point 

- Standard Type 

The XP95 IS Manual Call Point is based on the 

standard waterproof model (58100-950), page 

80. It features an “interrupt” facility to provide fast 

response to an alarm. 

XP95 IS Manual Call Point Standard 

Without flap – Red 55100-940 

Without flap – Yellow † 55100-942 

Without flap Blue/White † 55100-944 


† Does not have LPCB or CPD approval 



environments 


atmospheric pressure and wind 


fires 

• Well suited for escape routes 







• Only accepts IS detectors 


• Waterproof 

• IP67

XP95 IS Manual Call Point 

- MEDC Style 

The MEDC style Manual Call Point is recommended 

for heavy duty applications. This model is made of 

glass-reinforced polyester and may be ordered as 

break glass or push-button style. 

XP95 IS Manual Call Point MEDC Style 

Break-glass – Red 55000-960 

Break-glass – Yellow 55000-962 

Break-glass – Blue 55000-964 

Break-glass – Black/Yellow Stripes 55000-966 

Break-glass with flap – Red 55000-961 

Break-glass with flap – Yellow 55000-963 

Break-glass with flap – Blue 

Break-glass with flap 

55000-965 

– Black/Yellow Stripes 55000-967 

Push Button – Red 55000-970 

Push Button – Yellow 55000-971 

Push Button – Blue 55000-972 

Push Button – Black/Yellow stripes 55000-973 

Protocol Translator and 

Galvanic Barrier 

The Protocol Translator and Galvanic Barrier are 

installed in the safe area ensuring integrity of 

communication between control equipment 

and field devices and safety within the limits of 

BASEEFA approvals. 

XP95 Protocol Translator 55000-855 

(single channel) 

XP95 Protocol Translator 55000-856 

(dual channel) 

Galvanic Barrier 29600-098 












• Reports address in under 0.2 seconds 

• Waterproof 

• Robust design 

XP95 IS 


• Translates voltage levels from a loop driver to 

be compatible with IS requirements 


together 

• IP67

98 


ORBIS IS 

Orbis IS 

intrinsically safe 

Orbis IS is a range of conventional 

detectors which have been developed 

from the standard Orbis smoke and 

heat detectors. Orbis IS is a range with 

modern styling and is electronically 

compatible with Apollo Series 60 

intrinsically safe conventional detectors. 

Orbis IS is a demonstration of Apollo’s 

commitment to the market for high 

quality conventional detectors for use 

in small to medium size installations. 

In developing this range, Apollo has 

put ease of installation and reliability 

in daily operation at the forefront of 

considerations. 

Features include: 

• TimeSaver Base ® 

• Patented FasTest ® enabling functional testing in four 

seconds 

• DirtAlert ® indicates limit of drift compensation 

• Tolerates extreme operating conditions: -40°C to +70°C 

• False alarm reduction 

• Flashing LED option

Orbis IS Optical Smoke Detector 

The Orbis IS Optical Smoke Detector works 




Orbis IS Optical Smoke ORB-OP-52027-APO 

Detector 

Orbis IS Optical Smoke ORB-OP-52028-APO 

Detector with flashing LED † 

Orbis IS Multisensor Smoke Detector 

The Orbis IS Multisensor Detector benefits from 

the same false alarm technology as the Optical 

Detector. It is a thermally enhanced smoke 

detector so will not give an alarm from heat alone. 

Orbis IS Multisensor ORB-OH-53027-APO 

Detector 

Orbis IS Multisensor ORB-OH-53028-APO 

Detector with flashing LED † 

Orbis IS Heat Detector 

The Orbis IS Heat Detector monitors temperature 

by using a single thermistor network which 

provides a voltage output proportional to the 

external air temperature. The Orbis IS range 

incorporates seven heat detector classes to suit a 

wide range of operating conditions. 

Orbis IS Heat Detector 

Rate of Rise, MAT 50°C 

A1R Standard ORB-HT-51145-APO 

A1R with Flashing LED † 



A1S Standard ORB-HT-51157-APO 

A1S with Flashing LED † 



A2S Standard ORB-HT-51147-APO 

A2S with Flashing LED † 



BR Standard ORB-HT-51149-APO 

BR with Flashing LED † 



BS Standard ORB-HT-51151-APO 

BS with Flashing LED † 



CR Standard ORB-HT-51153-APO 

CR with Flashing LED † 



CS Standard ORB-HT-51155-APO 

CS with Flashing LED † ORB-HT-51156-APO 





ORBIS IS 


• Recommended for early warning of fire in 

most areas 

• Improved sensitivity to black smoke 

• Compensation for slow changes in sensitivity 

• Algorithms for reliability of alarm 


• Sensitive to fast burning, flaming fires 

• Improved sensitivity to black smoke 

• Compensation for slow changes in sensitivity 

• Algorithms for reliability of alarm 





• Reduced incidences of false alarms 

• Increased reliability of detection

100 


ORBIS IS 

Orbis IS TimeSaver ® Base 

The IS TimeSaver ® Base is a completely new 

design that provides installers with an open 

working area with fixing holes shaped to allow a 

simple mounting procedure. 

Orbis IS Timesaver ® Base ORB-MB-50018-APO 

Orbis IS Adaptor 

The Orbis IS Adaptor enables Orbis IS detector 

heads to be fitted into existing Series 60 IS 

bases in order to upgrade systems with minimal 

disruption. 

Orbis IS Adaptor ORB-BA-50008-APO 

Galvanic Barrier 

The Galvanic barrier is installed in the safe area 

and ensures system integrity. 

Galvanic Barrier 29600-378 

















with ease 

• Eliminates the need for re-wiring 

• Ideal for conventioanl hazardous areas 

• Enables compliance with the ATEX directive 


together 

• IP67


ORBIS IS

102 

UL 

UL 

Apollo has developed ranges of detectors for the 

American market and those markets which require 

UL classification. Apollo has carefully researched 

and developed the ranges to ensure that they meet 

not only the UL and other standards but also the 

demands of today’s high technology environments.

The XP95A range of analog 

addressable fire detectors is advanced 

in design and performance and offers 

unique features that benefit both the 

installer and the end user. 

The range is based on Apollo’s XP95 range. XP95A has a 

‘central intelligence’ system where all the decisions are made 

by the control panel. Each detector is addressed using Apollo’s 

patented XPERT card, supplied with the mounting bases. The 

XP95A range includes an ionization detector, a photo-electric 

detector, a heat detector, a multisensor, an isolator and a 

series of modules. 

Key features of XP95A include: 


• Analog value report 

• Address confirmation 

• Alarm flag 

• Unobtrusive design 

• Error check 

XP95A UL 

UL 103 

XP95A

104 

UL 

XP95A 

XP95A Ionization Smoke Detector 

The XP95A Ionization Detector uses a low activity 

radioactive foil to detect fires by irradiating the 

air in the smoke chambers and causing a current 

flow. If smoke enters the chamber, the current 

flow is reduced leading to an alarm. 

XP95A Ionization Smoke Detector † 55000-550 

XP95A Ionization Smoke Detector (ULC)* 55000-555 

XP95A Photo-Electric Smoke 

Detector 

The XP95A Photo-Electric Smoke Detector works 

on the light-scatter principle and is ideal for 



XP95A Photo-Electric Smoke Detector 55000-650 

XP95A Heat Detector 

The XP95A Heat Detector monitors temperature 

by using a single thermistor network which 

provides a voltage output proportional to the 

external air temperature. It is classified as an 

Ordinary detector by UL. 

XP95A Heat Detector 55000-450 

XP95A Multisensor 

The XP95A Multisensor contains a photo-electric 

smoke sensor and a thermistor (temperature 

sensor) whose outputs are combined to give the 

final analog value. 

XP95A Multisensor 55000-886 

XP95A Loop Powered Beam Detector 

The XP95A Beam Detector is made up of three 

main parts: the transmitter, which projects a beam 

of infra-red light, the receiver, which registers 

the light and produces an electric signal, and 

the interface, which processes the signal and 

generates alarm or fault signals. 

XP95A Loop Powered Beam Detector 55000-266 


† Does not have ULC approval 

* Does not have UL approval 



environments 


atmospheric pressure 


fires 


• Unaffected by atmospheric pressure 




car parks 




bedrooms or warehouse loading bays 



• Four selectable alarm levels 

• Drift Compensation 

• Remote interface 

• Simple wiring and alignment 

• Designed to protect large open spaces such as 

museums, churches and warehouses

XP95A Low Power Relay Base 

The XP95A Low Power Relay Base incorporates a 

low power relay to control field equipment such 

as automatic door closers. 

XP95A Low Power Relay Base 4” 45681-242UL 

For information on XPERT cards, please see page 23. 

XP95A Mounting Base 

All detectors in the XP95A range fit the XP95A 

Mounting Base which is a low insertion force 

base with stainless steel contacts for the detector 

terminals. XPERT cards are supplied with all bases. 

XP95A Mounting Base 4” 45681-210USA 


E-Z Fit Base 

The E-Z fit base is a low profile 6” mounting base 

for XP95A detectors. 

E-Z Fit Base 45681-250 

XP95A Isolating Base 

The XP95A Isolating Base senses and detects short 

circuit faults on XP95A loops and spurs. 

XP95A Isolating Base 45681-321USA 

XP95A Isolator 

The XP95A Isolator is placed at intervals on the 

loop and ensures that, in the case of a short 

circuit, only the section between the isolators will 

be affected. When the short circuit is removed, 

the isolators automatically restore power and data 

to the isolated section. 

XP95A Isolator 55000-750 





removal 

• High degree of protection against 

unauthorized removal 

UL 105 

XP95A 




• Up to 20 devices may be installed between 

isolating bases 


• Detects wiring short-circuits using patented 

technology 




isolators

106 

UL 

XP95A 

XP95A Isolator Base 

The XP95A Isolator Base is unique and designed to 

only accept the XP95A Isolator. 

XP95A Isolator Base 45681-211USA 

XP95A Mini Priority Switch Monitor Module 

The XP95A Mini Priority Switch Monitor is 

designed to monitor the state of one or more 

single pole, volt free contacts and to report 

the status to Apollo compatible analog control 

equipment. It can also place a signal on the loop 

to provide early warning if a device such as a pull 

station is operated. 

XP95A Mini Priority Switch 55000-830 

Monitor Module 

XP95A Mini Switch Monitor Module 

The XP95A Mini Switch Monitor Module is 





XP95A Mini Switch Monitor Module 55000-831 

XP95A Switch Monitor Module 

The XP95A Switch Monitor Module is designed to 


free contacts connected and to report the status 

to Apollo compatible analog control equipment. 

XP95A Switch Monitor Module 55000-805 


• Only accepts isolators 

• Three input states - ’normal’, ’fault’ and ’alarm’ 



• Designed to fit into equipment with limited space 


• Monitors equipment where a fast response 

is required 

• Interrupt facility 

• Three input states - ’normal’, ’fault’, and ’alarm’ 



• Designed to fit into equipment with limited space 




• Loop powered

XP95A Priority Switch Monitor 

Module 

The XP95A Priority Switch Monitor Module is 




equipment. It can also place a signal on the loop 

to provide early warning if a device such as a pull 

station is operated. 

XP95A Priority Switch Monitor 55000-806 

Module 

XP95A Dual Priority Switch Monitor 

Module 

The XP95A Dual Priority Switch Monitor Module 

contains two priority switch monitor modules 

(55000-806) on a single plate. 

XP95A Dual Priority Switch Monitor 55000-790 

Module 

XP95A Switch Monitor Input/Output 

Module 

The XP95A Switch Monitor Input/Output Module 

provides a voltage free, single pole, change-over 

relay output, a single, monitored switch input and 

unmonitored, non-polarized opto-coupled input. 

XP95A Switch Monitor 55000-820 

Input/Output Module 

XP95A Sounder Control Module 

The XP95A Sounder Control Module monitors and 

controls the operation of a zone of conventional 

sounders and reports their status to the control 

panel. 

XP95A Sounder Control Module 55000-825 

XP95A Relay Output Module 

The XP95A Relay Output Module provides a single 

2-pole changeover relay. 

XP95A Relay Output Module 55000-863 



• Fast response time 


UL 107 

XP95A 




• Fast response time 



closed levels 





• May be synchronized when in pulsed 

operation 

• Can also be used for public address speakers 


• Can be placed anywhere on loop

108 

UL 

SERIES 65A 

Series 65A 

UL 

Series 65A is a range of conventional 

fire detectors available in three 

versions: 

• Standard 

• Flashing LED 

• Flashing LED and magnet operated test switch

Series 65A Ionization Smoke 

Detector 

The Series 65A Ionization Smoke Detector uses a low 





Series 65A Ionization Smoke Detector 

- Standard 55000-227 

Series 65A Ionization Smoke Detector 55000-226 

with flashing LED 

Series 65A Ionization Smoke Detector 55000-225 

with flashing LED and magnetic test switch 

Series 65A Photo-Electric 


The Series 65A Photo-Electric Smoke Detector 

incorporates a pulsing LED located within the 

housing of the detector. The detector housing is 

identical to that of the Ionization Detector but has 

an indicator LED which is clear in quiescent state 

but produces red light in alarm. 

Series 65A Photo-Electric Detector 

- Standard 55000-327 

Series 65A Photo-Electric Detector 55000-326 


Series 65A Photo-Electric Detector 55000-325 


S65A Photo-Electric High Sensitivity 55000-328 

Series 65A Heat Detector 

The Series 65A Heat Detector monitors 

temperature by using a dual thermistor network 

which provides a voltage output proportional to 

the external air temperature.There are nine heat 

detectors in the Series 65A range designed to suit 

a wide variety of operating conditions. 

Series 65A Heat Detector 

135°F - Standard 55000-140 

135°F - flashing LED 55000-139 

135°F - flashing LED and magnetic 55000-138 

test switch 

170°F - Standard 55000-143 

170°F - flashing LED 55000-142 


test switch 

200°F - Standard 55000-146 

200°F - flashing LED 55000-145 


test switch 


SERIES 65A 



environments 



• Flashing LED and magnet operated test switch 

option 


fires 






switch option 








switch option 

UL 109

110 

UL 

SERIES 65A 

Series 65A Standard Base 

The Series 65A Base has been designed to enable 

detectors to be fitted without the need of force 

– particularly useful when fitting to suspended 

ceilings. All Series 65A bases have a ‘one way 

only’ fit. 

Series 65A Base 4” 45681-200USA 

Series 65A Base 6” 48681-220USA 

Series 65A Standard Relay Base 4” 

The Standard Series 65A Relay Base provides one 

set of volt-free, changeover (form C) contacts that 

change state when the detector signals an alarm. 

Series 65A Standard Relay Base 4” 45681-255 

Series 65A Auxiliary Relay Base 4” 

The Series 65A Auxiliary Relay Base provides two 

sets of volt-free changeover contacts to facilitate 

the switching of a remote LED or other auxiliary 

device. 

Series 65A Auxiliary Relay Base 4” 45681-256 

Series 65A End-of-Line Relay Base 

The Series 65A End-of-Line (EOL) Relay Base is 

intended for use with 4-wire circuits and feature 

two sets of changeover contacts and a power 

supervision relay. 

Series 65A 12V End-of-Line Relay 

Base 4” 45681-257 

Series 65A 24V End-of-Line Relay 

Base 4” 45681-258 

Series 65A Low Profile Base 6” 

A low profile mounting base for Series 65A 

detectors. 

Series 65A Low Profile Base 6” 45681-232 





• Contains a ground wire terminal 

• Contains no electrical parts 
















• Contains a ground wire terminal

Series 65A E-Z Fit Base 6” 

A low profile mounting base for Series 65A 

detectors. 

Series 65A E-Z Fit Base 6” 45681-251 


SERIES 65A 

• High degree of protection against unauthorized 

removal 

UL 111

112 

UL 

DISCOVERY UL 

Discovery 

UL 

Discovery UL is a range of highspecification, 

intelligent fire detectors 

developed to meet the requirements of 

sophisticated systems while providing 

engineers with an additional dimension 

in fire protection capability. Discovery 

UL has a ‘distributed intelligence 

system’ where decisions are made in 

the detector head as well as at the 

control panel. Drift compensation is 

also incorporated into the detector, 

allowing it to adapt to dirty or dusty 

environments, which reduces false 

alarms. 

Each detector in the Discovery UL range can operate in 

one of five response modes, which can be selected from 

the control panel. The response characteristics have 

been carefully set so that the detectors comply with the 

requirements of the relevant part of UL in all response 

modes. Mode One will give a higher sensitivity to fire 

than Mode five. 

Discovery gives you total reassurance in installations where 

adaptability to changing conditions and protection against 

unwanted alarms are paramount. 

Key features of Discovery UL include: 



• Five response modes for ease of optimization to 

changing environments 

• Drift compensation to ensure constant sensitivity 

• Four bytes of non-volatile memory for user data 

• Alarm flag for fast alarm reporting 

• Conventional alarm facility during control panel 

processor fault 

• 360° visibility in alarm 

• Compatible with XP95A systems

Discovery UL Ionization Smoke 

Detector 

The Ionization detector uses a low activity 

radioactive foil to detect fires by irradiating the 

air in the smoke chambers and causing a current 

flow. If smoke enters the chamber, the current 

flow is reduced leading to an alarm. 

Discovery UL Ionization Smoke 58000-550 

Detector 

Discovery UL Photo-Electric Smoke 

Detector 

The Discovery UL Photo-Electric Smoke Detector 

works using the light scatter principle and is 

ideal for applications where slow-burning or 

smouldering fires are likely. 

Discovery UL Photo-Electric 58000-650 


Discovery UL Heat Detector 

The Discovery UL Heat Detector, distinguishable 

by the low airflow resistant case, uses a single 


the detector. 

Discovery UL Heat Detector 58000-450 

Discovery UL Multisensor Detector 

The Discovery UL Multisensor Detector comprises 

optical smoke and thermistor temperature sensors 

whose outputs are combined to give the final 

analog value. As a result, the Multisensor is useful 

over a wide range of applications and is highly 

immune to false alarms. 

Discovery UL Multisensor Detector 58000-750 


DISCOVERY UL 



environments 



fires 







car parks 



• Ideal for wide range of applications 

• Highly immune to false alarms 

• Well suited for sensitive environments 



UL 113

114 

UL 

DISCOVERY UL 

XP95A Mounting Base 

All detectors in the Discovery UL range fit the 

XP95A Mounting Base. The Mounting Base is 

a low insertion force base with stainless steel 

contacts for the detector terminals. XPERT cards 

are supplied with all bases. 



E-Z Fit Base 

The E-Z Fit Base is a low profile 6” mounting base 

for Discovery UL detectors. 

E-Z Fit Base 45681-250 

XP95A Isolating Base 

The XP95A Isolating Base senses and detects short 

circuit faults on Discovery UL loops and spurs. 

XP95A Isolating Base 45681-321USA 

XP95A Isolator 

The XP95A Isolator can be used on a Discovery 

UL loop and is placed at intervals on the loop and 

ensures that, in the case of a short circuit, only 


When the short circuit is removed, the isolators 



XP95A Isolator 55000-750 

XP95A Isolator Base 

The XP95A Isolator Base is unique and designed to 

only accept the XP95A isolator. However, both can 

be used with a Discovery UL system. 

XP95A Isolator Base 45681-211USA 





removal 

• High degree of protection against unauthorised 

removal 


isolating bases 


technology 




isolators 

• Only accepts the XP95A Isolator

DISCOVERY UL 

UL 115

116 


Test 

Equipment & 

Maintenance 

To keep a fire detection system in good working 

order, it should be subject to a routine maintenance 

programme in accordance with locally applicable 

regulations. Over the course of a year, every 

detector in the system should be functionally tested 

at least once, using recommended equipment. 

Apollo offer a range of test equipment, for both 

conventional and intelligent systems to enable you 

to do this.

XP95 Test Set 

The XP95 Test Set is a self-contained, portable 

test unit capable of providing a number of useful 

functions in relation to individual detectors, 

ancillary devices or complete circuits of analogue 

addressable devices in the Apollo intelligent 

ranges. The main function of the test set is to help 

the engineer guarantee correct loop configuration 

before an active control panel is installed. 

XP95 Test Set 55000-870EUR 

Discovery Programmer 

The Discovery Programmer is a portable test and 

configuration tool for Discovery smoke and heat 

detectors. 

Discovery Programmer 53832-030 

Accessories: 

Conventional Test Set 

The Conventional Test Set is an invaluable tool 

designed to give a thorough on-site check of 

conventional fire detectors within the Apollo 

Series 65 and AlarmSense range. Each Test Set 

is supplied with a link head, mains adaptor and 

carrying case with shoulder strap. 

Conventional Test Set 53832-020 

Flame Sensor Test Unit and Case 

The Flame Sensor Test Kit is a tool which is 

designed to test flame detectors without the 

need of real flames. 

Test Equipment and Maintenance 117 

TEST EQUIPMENT AND MAINTENANCE 

• User friendly LCD information display 

• Speedy commissioning 

• Option for hard copy of results 

• No unnecessary site visits 

• Significant cost reductions 

• Look up the date of manufacture 

• Check the drift compensation value 

• Display and change the operating mode 

• Select/de-select LED flash mode 

• Tests detectors 

• Reads approval codes 


Printer for XP95 Test Set 55000-872 

Flame Sensor Test Unit and Case 29600-226 


• Easy to use 

• 2 button select/accept options 

• LCD for clear display 

• Mimics the characteristics of real flames

118 


TEST EQUIPMENT AND MAINTENANCE 

In addition to the main test kits, Apollo provide a range of equipment 

to enable you to keep your system in good working order. 

Product Name 

FOR INSTALLATION AND REMOVAL OF DETECTORS: 

Part Number 

Detector Extract Tool 29600-102 

Extension Pole, 1.13m 29600-103 

Telescopic Pole, 1.26m to 4.5m 29600-104 

1.5mm Hexagonal Driver (locks detectors to bases) 29600-095 

XPERT Card Insertion Tool 

FOR IN SITU FUNCTIONAL TESTING OF INDIVIDUAL DETECTORS: 

Solo 

45681-235 

Smoke Dispenser Head 29600-100 

Aerosol Test Gas 29600-225 

Heat Detector Test Pole (240V) 29600-229 

Heat Detector Test Pole (110V) 29600-231 

Cordless Heat Tester Kit 29600-212 

Cordless Heat Detector Tester 29600-213 

CO Test Gas 29600-235 

Detector Duster 29600-449 

Battery Batons 29600-183 

Battery Charger* 

Testifire 

29600-214 

Smoke/Heat Unit 29600-459 

Smoke/Heat Kit 29600-460 

Smoke/Heat/CO Unit 29600-461 

Smoke/Heat/CO Kit 29600-462 

6-Pack Replacement Smoke Capsule 29600-463 

3-Pack Replacement Smoke Capsule 29600-464 

6-Pack Replacement CO Capsule 29600-465 

3-Pack Replacement CO Capsule 29600-466 

Battery Batons 29600-183 

Battery Charger* 29600-214 

Aerosol Test Gas 

29600-225 

CO Test Gas 

29600-235 

Telescopic Pole, 

1.26m to 4.5m 

29600-104 


*When ordering please state if you require an EU lead or UK lead. 

Extension Pole,1.13m 

29600-103


TEST EQUIPMENT AND MAINTENANCE

120 

Additional Services 

Additional 

Services

Loop Calculator 

The Apollo Loop Calculator is a free computer programme used 

to establish the viability of a design. It enables engineers to 

calculate the total loop loading in a proposed Discovery or XP95 

fire detection system by inputting relevant variables, for example 

control equipment, loop devices and cable length and type. 

Parameters are included for Apollo protocol compatible panels. 

Please see the Apollo website for more details 

www.apollo-fire.co.uk/loop-calc 

SimSystem 

SimSystem is a tool for simulating loops of detectors and 

interfaces in order to demonstrate a system and prove the 

design without having to connect actual products to a control 

panel. SimSystem consists of a software programme which 

features an intuitive graphical display and an interface which 

runs up to four loops. A maximum of two interfaces can be 

connected, thus allowing a system of up to eight loops to be 

simulated. 

Training 

Apollo offers a series of free one-day training courses for its 

customers. The courses cover the following modules: 

Module 1: Detection Principles & Device Selection 

Module 1.1: Carbon Monoxide Fire Detection (Coming soon) 

Module 2: Conventional Detector Operation 

Module 2.1: AlarmSense 

Module 2.2: Orbis (Coming soon) 

Module 3: Analogue Addressable Principles 

Module 3.1: XP95 

Module 3.2: Discovery 

Module 3.3: XPlorer 

Module 3.4: AV Alarm Devices (Coming soon) 

Module 3.5: XPander 

Module 4: Intrinsically Safe Equipment (Coming soon) 

Module 5: Service, Test & Maintenance 

In addition to the standard training courses, Apollo can offer 

tailor-made courses if required. The majority of courses are held 

at Apollo’s head office, but on-site training is also available. 

You can find out more about Apollo’s training days and book your 

place by visiting www.apollo-fire.co.uk/training 

Additional Services 121

122 

Approvals 

Approvals 

Apollo Fire Detectors has a library that contains 

hundreds of different types of product certificate 

that have been obtained from many different 

national and international bodies. Listed below is 

a small selection. Please see our website for more 

details and up-to-date approvals information. 

Loss Prevention Certification Board (LPCB) 

The LPCB is an international certification body who 

specialises in the fields of security and fire protection. LPCB 

approval is recognised by governments and regulatory 

authorities worldwide, particularly in Europe, the Asia-Pacific 

and the Middle East. The LPCB approval process involves 

the assessment and testing of products to ensure that they 

meet quality standards set by a team of industry experts. 

Testing is carried out in-house by LPCB and the approval 

is maintained by regular audits to ensure that the product 

continues to meet the approval criteria. 

Apollo products with LPCB approval: 

Orbis 

Class A1R Heat Detector ORB-HT-11001-APO 

Class A1R Heat Detector with flashing LED ORB-HT 11013-APO 

Class A1S Heat Detector ORB-HT-11166-APO 

Class A1S Heat Detector with flashing LED ORB-HT-11167-APO 



Class BR Heat Detector ORB-HT-11003-APO 

Class BR Heat Detector with flashing LED ORB-HT-11015-APO 

Class BS Heat Detector ORB-HT-11004-APO 

Class BS Heat Detector with flashing LED ORB-HT-11016-APO 

Class CR Heat Detector ORB-HT-11005-APO 

Class CR Heat Detector with flashing LED ORB-HT-11017-APO 

Class CS Heat Detector ORB-HT-11006-APO 

Class CS Heat Detector with flashing LED ORB-HT-11018-APO 

Optical Smoke Detector ORB-OP-12001-APO 

Optical Smoke Detector with flashing LED ORB-OP-12003-APO 

Multisensor Smoke Detector ORB-OH-13001-APO 



TimeSaver Base ORB-MB-00001-APO 

TimeSaver Base LX ORB-MB-00002-APO 


TimeSaver Deep Base ORB-MB-00019-APO 

Orbis IS 


Class A1R Heat Detector with flashing LED ORB-HT-51146-APO 













Multisensor Detector ORB-OH-53027-APO 

Multisensor Detector with flashing LED ORB-OH-53028-APO 



Adaptor ORB-BA-10008-APO 


Series 65 

Class A1R Heat Detector with 

flashing LED and magnetic test switch 

55000-120 

Class A1R Heat Detector with flashing LED 55000-121 

Class A1R Heat Detector 55000-122 

Class BR Heat Detector with 


55000-125 

Class BR Heat Detector with flashing LED 55000-126 

Class BR Heat Detector 55000-127 

Class CR Heat Detector with 


55000-130 

Class CR Heat Detector with flashing LED 55000-131 

Class CR Heat Detector 55000-132 

Class CS Heat Detector with 


55000-135 

Class CS Heat Detector with flashing LED 55000-136 

Class CS Heat Detector 55000-137 

Integrating Ionisation Smoke Detector 


55000-218

Integrating Ionisation Smoke Detector 55000-219 



Ionisation Smoke Detector with 55000-215 


Ionisation Smoke Detector with flashing LED 55000-216 

Ionisation Smoke Detector 55000-217 

Optical Smoke Detector with 55000-315 


Optical Smoke Detector with flashing LED 55000-316 

Optical Smoke Detector 55000-317 

Standard Base 45681-200 

Diode Base 45681-201 

Standard Relay Base 45681-245 

Auxiliary Contacts Base 45681-246 

Relay 12V EOL Base 45681-247 


XP95 


Class A2S Heat Detector 55000-400 



Multisensor Detector 55000-885 

Mounting Base 45681-210 

20D Isolating Base 45681-284 

Low Power Relay Base 45681-242 

Manual Call Point (Surface) 55100-905 

Manual Call Point with Isolator (Surface) 55100-908 


XP95 Interfaces 








XP95 IS 




Standard Manual Call Point 55100-940 


Discovery 

Heat Detector - Variable Temperature 58000-400 





20D Isolating Base 45681-284 



Approvals 123 

VdS 

VdS is an international and independent testing and 

certification body based in Germany who specialises in the 

fields of fire prevention and security. With over 100 years 

experience, VdS inspects and certifies products to ensure 

they meet standards jointly established by VdS and industry 

experts. 

Apollo products with VdS approval: 

Orbis 











TimeSaver LX Base ORB-MB-00002-APO 

TimeSaver Diode Base ORB-DB-00003-APO 


Orbis IS 












Series 65 










Auxiliary Contacts Base 45681-246 

Relay Base - 12V EOL 45681-247 

Relay Base - 24V EOL 45681-248 

XP95 

XP95 Heat Detector 55000-420 


Optical Smoke Detector 55000-620

124 

Approvals 


20D Positive Short Circuit Isolator 55000-710 

20D Negative Short Circuit Isolator 55000-720 


Interfaces 








Sounders 

Integrated Base Sounder DIN tone 45681-300 


Discovery 

Variable Temperature Heat Detector 58000-400 





UL 

Underwriters Laboratories (UL) is an independent 

product certification body based in the United States. 

UL test products against standards set by a team of industry 

experts and potential customers. There are no laws which 

specify that a UL mark must be used on a product, however, 

in the US there are many municipalities that have laws, 

codes or regulations which require a product to be tested by 

a recognised testing laboratory such as UL before it can be 

sold in their area. 

Apollo products with UL approval: 

Series 65A 

Heat Detector 135°F - flashing LED 55000-138 

and magnetic test switch 


Heat Detector 135°F - Standard 55000-140 



Heat Detector 170°F - flashing LED/ 55000-142 






Ionization Smoke Detector - flashing LED 55000-225 


Ionization Smoke Detector with flashing LED 55000-226 

Ionization Smoke Detector - Standard 55000-227 

Photo-Electric Smoke Detector flashing LED 55000-325 


Photo-Electric Smoke Detector 55000-326 


Photo-Electric Smoke Detector - Standard 55000-327 

Standard Base 4” 45681-200 

Standard Base 6” 45681-220 

Low Profile Base 6” 45681-232 

E-Z Fit Base 45681-251 

4” Conventional Standard Relay Base 45681-255 

4” Conventional Auxiliary Contact Base 45681-256 

4” Conventional Relay 12V EOL Base 45681-257 

4” Conventional Relay 24V EOL Base 45681-258 

XP95A 

Beam Detector 55000-266 

High Temperature Heat Detector 55000-450 

Ionization Smoke Detector 55000-550 



Negative Isolator 55000-750 

4” Addressable Base 45681-210 


6” Addressable Base 45681-225 

6” Addressable Low Profile Relay Base 45681-242 

6” Addressable E-Z Fit Base 45681-250 

20D Negative Isolating Base 45681-321 

XP95A Interfaces 

Dual Switch Monitor 55000-790 


Priority Switch Monitor 55000-806 

Switch Monitor Input/Output Unit 55000-820 


Mini Priority Switch Monitor 55000-830 


Relay Output Module 55000-863 

Discovery 

Variable Temperature Heat Detector 58000-450 




ULC (Underwriters Laboratory of Canada) 

ULC is an independent product certification body that 

undertakes the quarterly inspection of manufacturers to 

ensure continued compliance of UL Listed/Recognised 

products to Agency reports and safety standards. This 

work is done under contract to UL Inc (Follow-up Services 

Division). They are not a branch or subsidiary of UL. 

Apollo products with ULC approval: 

XP95A 



Heat Detector 55000-450



Mounting Base 4” 45681-210USA 



Low Power Relay Base 4” 45681-242 

E-Z Fit Base 45681-250 


XP95A Interfaces 

Mini Priority Switch Monitor Module 55000-830 

Mini Switch Monitor Module 55000-831 

Switch Monitor Module 55000-805 

Priority Switch Monitor Module 55000-806 

Switch Monitor Input/Output Module 55000-820 

Sounder Control Module 55000-825 

Relay Output Module 55000-863 

Series 65A 

Photo-Electric Smoke Detector Standard 55000-327 

Photo-Electric Smoke Detector with 55000-326 

flashing LED 

Photo-Electric Smoke Detector with 55000-325 


135°F Heat Detector Standard 55000-140 

135°F Heat Detector with flashing LED 55000-139 











Standard Relay Base 4” 45681-255 

Auxiliary Relay Base 4” 45681-256 

12V End-of-Line Relay Base 4” 45681-257 

24V End-of-Line Relay Base 4” 45681-258 

E-Z Fit Base 6” 45681-251 

Discovery UL 


Heat Detector 58000-450 




E-Z Fit Base 45681-250 

FM 

FM Approvals certifies products and services with a 

unique focus on objectively testing property loss prevention 

products and services and certifying those that meet 

rigorous loss prevention standards. 

Apollo products with FM approval: 

XP95A 







Discovery UL 




CCCF 

Fire Product Type Approval or CCCF Approval is a 

compulsory certification for fire products entering the 

China market. 

Apollo products with CCCF approval: 

XP95 

Grade 2 Heat Detector 55000-420 



Surface Mount Manual Call Point 55000-905 

Flush Mount Manual Call Point 55000-906 

Discovery 

Discovery Heat Detector 58000-400MAC 

Discovery Ionisation Smoke Detector 58000-500MAC 

Discovery Optical Smoke Detector 58000-600MAC 

Discovery Multisensor Detector 58000-700MAC 

Discovery UL Heat Detector 58000-450 

Discovery UL Ionization Smoke Detector 58000-550 

Discovery UL Photo-Electric Smoke Detector 58000-650 

Discovery UL Multisensor Detector 58000-750 

Discovery Manual call Point with Isolator 58100-908 

Red (Surface) 

Discovery Manual Call Point - Red (Surface) 58100-910 

Approvals 125 

Orbis 

Orbis Optical Smoke Detector with ORB-OP-12003-PRC 

flashing LED 

Orbis Multisensor with flashing LED ORB-OH-13003-PRC 

Orbis A1R Heat Detector with flashing LED ORB-HT-11013-PRC 

Orbis A2S Heat Detector with flashing LED ORB-HT-11014-PRC 

Orbis BR Heat Detector with flashing LED ORB-HT-11015-PRC 

Orbis BS Heat Detector with flashing LED ORB-HT-11016-PRC 

Orbis CR Heat Detector with flashing LED ORB-HT-11017-PRC 

Orbis CS Heat Detector with flashing LED ORB-HT-11018-PRC 

Orbis Marine Optical Smoke Detector ORB-OP-42003-MAC 


Orbis Marine Multisensor Detector ORB-OH-43003-MAC 


Orbis Marine A1R Heat Detector with flashing LED ORB-HT-41013-MAC

126 

Approvals 

Orbis Marine A2S Heat Detector with flashing LED ORB-HT-41014-MAC 

Orbis Marine BR Heat Detector with flashing LED ORB-HT-41015-MAC 

Orbis Marine BS Heat Detector with flashing LED ORB-HT-41016-MAC 

Orbis Marine CR Heat Detector with flashing LED ORB-HT-41017-MAC 

Orbis Marine CS Heat Detector with flashing LED ORB-HT-41018-MAC 

XP95 

XP95 Waterproof Manual Call Point 55000-950 

Orbis IS Detectors 

Orbis IS A1R Heat Detector with flashing LED ORB-HT-51146-PRC 

Orbis IS A2S Heat Detector with flashing LED ORB-HT-51148-PRC 

Orbis IS BR Heat Detector with flashing LED ORB-HT-51150-PRC 

Orbis IS BS Heat Detector with flashing LED ORB-HT-51152-PRC 

Orbis IS CR Heat Detector with flashing LED ORB-HT-51154-PRC 

Orbis IS CS Heat Detector with flashing LED ORB-HT-51156-PRC 

Orbis IS Optical Smoke Detector with flashing LED ORB-OP-52028-PRC 

Orbis IS Multisensor with flashing LED ORB-OH-53028-PRC 

XP95 IS 

XP95 IS Heat Detector 55000-440 

XP95 IS Ionisation Smoke Ddetector 55000-540 

XP95 IS Optical Smoke Detector 55000-640 

XP95 IS Manual Call Point without flap - red 55000-940 

XP95 IS Manual Call Point MEDC 58100-970 

Push Button -red 

XP95 IS Manual Call Point MEDC 58100-971 

Push Button - yellow 

Construction Products Directive (CPD) 

The CPD is one of the ‘New Approach’ Directives to 

create a single European market by removing technical 

barriers to trade between Member States. Products which 

meet the essential requirements of the relevant directives 

will be eligible for CE marking and may be placed on the 

market anywhere within the EEA. 

Apollo products with CPD approval: 

AlarmSense 

Integrating Optical Detector 55000-391 

Heat Detector A1R 55000-190 

Heat Detector CS 55000-193 

Base 45681-244 

Sounder Base LR 45681-341 

Sounder Base 45681-510 

Sounder Beacon Base LR 45681-509 



Series 65 

Class A1R Heat Detector with 55000-120 


Class A1R Heat Detector with flashing LED 55000-121 


Class BR Heat Detector with 55000-125 


Class BR Heat Detector with flashing LED 55000-126 


Class CR Heat Detector with 55000-130 


Class CR Heat Detector with flashing LED 55000-131 


Class CS Heat Detector with 55000-135 


Class CS Heat Detector with flashing LED 55000-136 


French Ionisation Smoke Detector 55000-208 

French Optical Smoke Detector 55000-308 

Ionisation Smoke Detector with 55000-215 


Ionisation Smoke Detector with flashing LED 55000-216 







Optical Smoke Detector with 55000-315 


Optical Smoke Detector with flashing LED 55000-316 




Auxiliary Relay Base 45681-246 



Orbis 


Class A1R Heat Detector with flashing LED ORB-HT 11013-APO 



















TimeSaver Base LX ORB-MB-00002-APO 

TimeSaver Deep Base ORB-MB-00019-APO

Orbis IS 





















XP95 





Multisensor Smoke Detector 55000-885 



XP95 Interfaces 








XP95 IS 




Base 55000-215 

Manual Call Point (Red) 55000-940 

Discovery 







Base Sounders 

Integrated Base Sounder with Isolator 45681-277 

Integrated Base Sounder 45681-278 

Slow Whoop Integrated Base Sounder 45681-290 

with Isolator 

Slow Whoop Integrated Base Sounder 45681-291 

Integrated Base Sounder with 45681-300 

Short Circuit Isolator (DIN tone) 

Intelligent Base Sounder 45681-265 

Intelligent Base Sounder for Isolating Base 45681-266 

Intelligent Base Sounder Slow Whoop 45681-267 

Intelligent Base Sounder Slow Whoop 45681-268 

for Isolating Base 

Series 65 Sounder Base 45681-512 

Series 65 Sounder Base with Diode 45681-513 

Sounder Beacon 

Multi-Tone Open Area Sounder Beacon Red 55000-291 

Sounder Beacon Base with Isolator 45681-330 


Slow Whoop Sounder Beacon Base 45681-332 

with Isolator 


with Isolator (DIN Tone) 

Sounders 

100dB(A) Loop-Powered Sounder Red 55000-278 

100dB(A) Loop-Powered Sounder White 55000-279 

100dB(A) Loop-Powered Sounder 55000-276 

Slow Whoop Red 

100dB(A) Loop-Powered Sounder 55000-277 

Slow Whoop White 

Weatherproof 100dB(A) Sounder Red 55000-274 

Weatherproof 100dB(A) Sounder White 55000-275 

Approvals 127 

XPander 

XPander Optical Smoke Detector and 

Mounting Base XPA-CB-12034-APO 

XPander Multisensor Detector and 


XPander A1R Heat Detector and 


XPander CS Heat Detector and Mounting 

Base XPA-CB-11171-APO 

XPander Manual Call Point XPA-MC-14006-APO 

XPander Sounder and Sounder Base Red XPA-CB-14001-APO 

XPander Sounder and Sounder Base White XPA-CB-14002-APO 

XPander Sounder Beacon and Sounder 

Base Red XPA-CB-14003-APO 

XPander Sounder Beacon Amber and 

Sounder Base White XPA-CB-14004-APO 

XPander Sounder Beacon and Sounder 

Base White XPA-CB-14005-APO

128 

Approvals 

ATEX 

The ATEX directive is compulsory for all equipment 

which is used in a hazardous area (where an explosive 

atmosphere might occur). The name ATEX comes from the 

French ATmospheres EXplosibles. 

Apollo products with ATEX approval: 

XP95 IS 

Ionisation Detector 55000-540 



Base 45681-215 

IS Standard Manual Call Points 55000-940/942/ 

944 

IS MEDC Manual Call Points 55000-960/962/ 

964/966/961/963/ 

965/967 

Orbis IS 



















TimeSaver Base ORB-MB-50018-APO

26729-152 Transparent Hinged Cover for 

Manual Call Point .............................................................79 

27249-005 Deckhead Adaptor PG16-M20 ...................................84 

29600-095 1.5mm Hexagonal Driver .............................................85 

29600-098 IS Galvanic Barrier ............................................................97 

29600-100 Smoke Dispenser Head ........................................... 118 

29600-101 Heat Detector Test Pole (240V) ............................. 118 

29600-102 Detector Extract Tool ................................................. 118 

29600-103 Extension Pole, 1.13m .............................................. 118 

29600-104 Telescopic Pole, 1.26m to 4.5m ............................ 118 

29600-110 Heat Detector Test Pole (110V) ............................ 118 

29600-131 Metal Deckhead Mounting Box (PG16) .................84 

29600-139 Metal Deckhead Mounting Box (M20)...................84 

29600-183 Battery Batons ............................................................. 118 

29600-203 Flame Detector Bracket ................................................47 

29600-206 Flame Detector Weathershield ..................................47 

29600-212 Cordless Heat Tester Kit ........................................... 118 

29600-213 Cordless Heat Detector Tester ............................... 118 

29600-214 Battery Charger ............................................................. 118 

29600-225 Aerosol Test Gas ......................................................... 118 

29600-226 Flame Sensor Test Unit and Case .......................... 117 

29600-235 CO Test Gas .................................................................... 118 

29600-239 DIN-Rail Interface Enclosure (4 units) .............. 77, 85 

29600-240 DIN-Rail Interface Enclosure (10 units) ........... 77, 85 

29600-241 Reflective Beam Detector Backbox .........................49 

29600-256 White Cap ...........................................................................56 

29600-257 Red Cap ...............................................................................56 

29600-318 Beacon Enclosure .............................................59, 67, 84 

29600-350 Firebeam Beam Detector 5-40m .............................49 

29600-351 Firebeam Extension Kit 40-80m ................................49 

29600-352 Firebeam Extension Kit 80-100m .............................49 

29600-353 Firebeam Adaptor Plate ................................................49 

29600-378 Galvanic Barier ............................................................... 100 

29600-449 Detector Duster ............................................................. 118 

29600-458 Base Mounted Flame Detector Bracket .................47 

29600-459 Smoke/Heat Unit .......................................................... 118 

29600-460 Smoke/Heat Kit ............................................................. 118 

29600-461 Smoke/Heat/CO Unit .................................................. 118 

29600-462 Smoke/Heat/CO Kit..................................................... 118 

29600-463 6-Pack Replacement Smoke Capsule .................. 118 

29600-464 3-Pack Replacement Smoke Capsule .................. 118 

29600-465 6-Pack Replacement CO Capsule ........................... 118 

29600-466 3-Pack Replacement CO Capsule ........................... 118 

29650-001 Magnetic Wand ................................................................67 

38531-771 Blank XPERT Card .............................................................23 

38531-822 Module Base .....................................................................83 

45681-200 Series 65 Standard Base ...............................................31 

45681-200USA Series 65A 4” Standard Base ................................... 110 

45681-201 Series 65 Diode Base .....................................................31 

45681-204 Conduit Box .......................................................................83 

45681-206 Series 65 Sav-Wire Base ..............................................32 

45681-209 Intelligent Deep Base ...............................................11,19 

45681-210 Intelligent Mounting Base .................................... 11, 18 

45681-210USA XP95A 4” Mounting Base ................................ 105,114 

45681-210MAR Discovery Marine Mounting Base .............................89 

45681-211 Isolator Base .............................................................. 12, 18 

45681-211USA XP95A Isolator Base ........................................... 105,114 

45681-211MAR Discovery Marine Isolator Base .................................89 

Index: Sequential Part Number List 129 

Index 

Sequential Part 

Number List 

45681-215 XP95 IS Mounting Base .................................................96 

45681-217 Polycarbonate Deckhead Mounting 

Box ...................................................................12,19, 28, 84 

45681-219 Intelligent Heater Base .......................................... 12, 19 

45681-220USA Series 65A 6” Standard Base.................................. 110 

45681-225USA XP95A 6” Mounting Base ................................ 105,114 

45681-232 Series 65A 6” Low Profile Base .............................. 110 

45681-233 Backplate ............................................................................83 

45681-235 XPERT Card Insertion Tool ........................................ 118 

45681-238 Series 90 to XP95 Base Adaptor ...............................85 

45681-242 Intelligent Low Power Relay Base .................... 12, 19 

45681-242UL XP95A 4” Low Power Relay Base ......................... 105 

45681-244 AlarmSense Base ............................................................37 

45681-245 Series 65 Standard Relay Base .................................32 

45681-246 Series 65 Auxiliary Relay Base ..................................32 

45681-247 Series 65 End-of-Line Relay Base (12V).................32 

45681-248 Series 65 End-of-Line Relay Base (24V).................32 

45681-250 E-Z Fit Base ............................................................. 105,114 

45681-251 Series 65A 6” E-Z Fit Base ......................................... 111 

45681-255 Series 65A 4” Standard Relay Base ...................... 110 

45681-256 Series 65A 4” Auxiliary Relay Base ....................... 110 

45681-257 Series 65A 4” 12V End-of-Line Relay Base ........ 110 

45681-258 Series 65A 4” 24V End-of-Line Relay Base ........ 110 

45681-265 Intelligent Base Sounder .............................................56 

45681-266 Intelligent Base Sounder for Isolating Base ...........56 

45681-267 Intelligent Base Sounder Slow Whoop ..................56 

45681-268 Intelligent Base Sounder Slow Whoop 

for Isolating Base .............................................................56 

45681-276 Ancillary Base Sounder ..................................................56 

45681-277 Integrated Base Sounder with Isolator ...................56 

45681-278 Integrated Base Sounder ..............................................56 

45681-284 Isolating Base ..............................................................11,18 

45681-290 Integrated Base Sounder - Slow Whoop 

with Isolator .......................................................................56

130 

Index: Sequential Part Number List 

45681-291 Integrated Base Sounder - Slow Whoop ...............56 

45681-292 White Cap ................................................................... 56, 65 

45681-293 Red Cap ....................................................................... 56, 65 

45681-294 AlarmSense White Cap ......................................... 57, 65 

45681-295 AlarmSense Red Cap ............................................. 57, 65 

45681-300 Integrated Base Sounder DIN-Tone with Isolator .56 

45681-309 Detector Ceiling Tile Mounting Box ..........................84 

45681-310 Sounder Ceiling Tile Mounting Box...........................84 

45681-311 Sounder Ceiling Plate .....................................................83 

45681-321 Intelligent Isolating Base ....................................... 11, 18 

45681-321USA XP95A Isolating Base ......................................... 105,114 

45681-330 Sounder Beacon Base with Isolator .........................65 

45681-331 Sounder Beacon Base .................................................65 

45681-332 Sounder Beacon Base Slow Whoop 

with Isolator .......................................................................65 

45681-333 Loop Powered Beacon Base with Isolator ............61 

45681-334 Sounder Beacon Base with Isolator DIN-Tone ....65 

45681-335 Loop-Powered Beacon Base Standard Flash .......61 

45681-336 Sounder Beacon Base with Australian Tone ........65 

45681-337 Loop-Powered Beacon Base with 

Australian Flash ................................................................61 

45681-338 Sounder Beacon Base with NZ Tone .......................65 

45681-340 AlarmSense Sounder Beacon Base LR ....................65 

45681-341 AlarmSense Sounder Base LR ...................................57 

45681-370 Series 65 Base Cover ....................................................83 

45681-380 XP95 Base Cover ............................................................83 

45681-393 Discovery Sounder Beacon Base ..............................65 

45681-508 Series 65 12V Relay Base ............................................32 

45681-509 AlarmSense Sounder Beacon Base ........................65 

45681-510 AlarmSense Sounder Base ..........................................57 

45681-512 Series 65 Sounder Base .............................................57 

45681-513 Series 65 Sounder Base with Diode ........................57 

45682-127 Pre-Addressed XPERT Cards........................................23 

53546-021 Conventional Duct Detector ........................................51 

53546-022 Intelligent Duct Detector ...............................................51 

53546-023 Orbis Duct Detector ........................................................51 

53832-020 Conventional Test Set ................................................. 117 

53832-030 Discovery Programmer .............................................. 117 

53832-070 MiniDisc Remote Indicator ..............12,19, 28, 33, 37 

55000-001 Intelligent Open-Area Sounder Red .........................54 

55000-002 Intelligent Open-Area Sounder White .....................54 

55000-005 Intelligent Open-Area Sounder Beacon Red.............. 

Lens .......................................................................................63 

55000-006 Intelligent Open-Area Sounder Beacon 

Clear Lens ...........................................................................63 

55000-009 Intelligent Open-Area Beacon Red Lens ...................59 

55000-010 Intelligent Open-Area Beacon Clear Lens) ...............59 

55000-020 Intelligent IR 3 Flame Detector .....................................46 

55000-021 Intelligent Flameproof IR 3 Flame Detector ............46 

55000-022 Intelligent Base Mounted UV Flame Detector .....47 

55000-023 Intelligent Base Mounted UV IR² Flame Detector ..47 

55000-024 Intelligent Base Mounted IR 3 Flame Detector .........47 

55000-120 Series 65 A1R Heat Detector flashing LED 

and magnetic test switch ............................................31 

55000-121 Series 65 A1R Heat Detector ....................................31 

55000-122 Series 65 A1R Heat Detector Standard ..................31 

55000-125 Series 65 BR Heat Detector flashing LED 


55000-126 Series 65 BR Heat Detector flashing LED ...............31 

55000-127 Series 65 BR Heat Detector Standard .....................31 

55000-130 Series 65 CR Heat Detector flashing LED 


55000-131 Series 65 CR Heat Detector flashing LED ...............31 

55000-132 Series 65 CR Heat Detector Standard ......................31 

55000-135 Series 65 CS Heat Detector flashing LED 


55000-136 Series 65 CS Heat Detector flashing LED ................31 

55000-137 Series 65 CS Heat Detector Standard ......................31 

55000-138 Series 65A 135˚F Heat Detector flashing LED 

and magnetic test switch ......................................... 109 

55000-139 Series 65A 135˚F Heat Detector flashing LED ... 109 

55000-140 Series 65A 135˚F Heat Detector Standard .......... 109 


and magnetic test switch ........................................ 109 

55000-142 Series 65A 170˚F Heat Detector flashing LED .. 109 

55000-143 Series 65A 170˚F Heat Detector Standard ........ 109 


and magnetic test switch ......................................... 109 

55000-145 Series 65A 200˚F Heat Detector flashing LED ... 109 

55000-146 Series 65A 200˚F Heat Detector Standard .......... 109 

55000-182 DIN-Rail Sounder Controller (5 Amperes)..............76 

55000-190 AlarmSense A1R Heat Detector (Standard) .........36 

55000-193 AlarmSense CS Heat Detector (High Temp) ........36 

55000-196 AlarmSense A1R Heat Detector and 

Sounder Base ....................................................................36 

55000-197 AlarmSense CS Heat Detector and 

Sounder Base ....................................................................36 

55000-198 AlarmSense A1R Heat Detector and 

Sounder Beacon Base ...................................................36 

55000-199 AlarmSense CS Heat Detector and 


55000-215 Series 65 Ionisation Smoke Detector 

flashing LED and magnetic test switch ...................30 

55000-216 Series 65 Ionisation Smoke Detector 

flashing LED ........................................................................30 

55000-217 Series 65 Ionisation Smoke Detector Standard ...30 

55000-218 Series 65 Integrating Ionisation Smoke 

Detector flashing LED and magnetic test switch ......30 

55000-219 Series 65 Integrating Ionisation Smoke 

Detector flashing LED .....................................................30 

55000-220 Series 65 Integrating Ionisation Smoke Detector ..30 

55000-225 Series 65A Ionization Smoke Detector 

flashing LED and magnetic test switch ................ 109 


flashing LED .................................................................. 109 


Standard ........................................................................... 109 

55000-266 XP95A Loop Powered Beam Detector ................ 104 

55000-268 Reflective Beam Detector (5-50m) .........................49 

55000-273 Reflective Beam Detector (50-100m) ....................49 

55000-274 Intelligent 100dB(A) Weatherproof Sounder 

Open-Area Red ................................................................54 

55000-275 Intelligent 100dB(A) Weatherproof Sounder 

Open-Area White ............................................................54 

55000-276 Intelligent 100dB(A) Open-Area Sounder 

Slow Whoop Red .............................................................54 


Slow Whoop White.........................................................54 

55000-278 Intelligent 100dB(A) Open-Area Sounder Red ....54 


White ....................................................................................54 

55000-280 Intelligent IR² Flame Detector .....................................46

55000-291 Multi-Tone Open Area Sounder Beacon Red .......63 

55000-292 Multi-Tone Open Area Sounder Beacon White ...63 

55000-293 Multi-Tone Open Area Sounder Beacon Red 

with Isolator .......................................................................63 

55000-294 Multi-Tone Open Area Sounder Beacon White 

with Isolator .......................................................................63 

55000-295 Flameproof Intelligent IR² Flame Detector ............46 

55000-296 Weatherproof Multi-Tone Open Area Sounder 

Beacon Red ........................................................................63 


Beacon White ...................................................................63 


Beacon Red with Isolator .............................................63 


Beacon White with Isolator .........................................63 

55000-315 Series 65 Optical Smoke Detector flashing 

LED and magnetic test switch ....................................30 

55000-316 Series 65 Optical Smoke Detector flashing LED 30 

55000-317 Series 65 Optical Smoke Detector Standard ........30 

55000-325 Series 65A Photo-Electric Smoke Detector 

flashing LED and magnetic test switch ................ 109 


flashing LED .................................................................. 109 


Standard ........................................................................... 109 

55000-390 AlarmSense Optical Smoke Detector ......................36 

55000-391 AlarmSense Integrating Optical Smoke 

Detector ..............................................................................36 

55000-392 AlarmSense Optical Smoke Detector and 

Sounder Base ....................................................................36 


Detector and Sounder Base ........................................36 

55000-394 AlarmSense Optical Smoke Detector and 



Detector and Sounder Beacon Base ........................36 

55000-400 XP95 Heat Detector A2S ..............................................17 

55000-401 XP95 Heat Detector CS .................................................17 

55000-440 XP95 IS Heat Detector ...................................................96 

55000-450 XP95A Heat Detector ................................................. 104 

55000-500 XP95 Ionisation Smoke Detector ..............................17 

55000-540 XP95 IS Ionisation Smoke Detector..........................96 

55000-550 XP95A Ionization Smoke Detector ........................ 104 

55000-588 Three Channel Input/Output Unit ..............................70 

55000-600 XP95 Optical Smoke Detector ....................................17 

55000-640 XP95 IS Optical Smoke Detector ...............................96 

55000-650 XP95A Photo-Electric Smoke Detector ................ 104 

55000-700MAR Discovery Marine Isolator .............................................89 

55000-720 Isolator ...........................................................................11,18 

55000-750 XP95A Isolator ..................................................... 105,114 

55000-760 Mini Switch Monitor ............................................... 74, 77 

55000-765 Mini Monitor Module .................................................. 106 

55000-790 XP95A Dual Priority Switch Monitor Module ..... 107 

55000-802 DIN-Rail Dual Isolator ......................................................77 

55000-803 DIN-Rail Input/Output Unit ...........................................76 

55000-804 DIN-Rail Output Unit .......................................................76 

55000-805 XP95A Switch Monitor Module .............................. 106 

55000-806USA XP95A Priority Switch Monitor Module ............... 107 

55000-812 DIN-Rail Zone Monitor with Isolator .........................77 

55000-820USA XP95A Switch Monitor Input/Output Module ... 107 

55000-821 DIN-Rail Switch Monitor Plus ......................................77 

Index: Sequential Part Number List 131 

55000-822 DIN-Rail Switch Monitor ................................................76 

55000-825 XP95A Sounder Control Module ............................. 107 

55000-826 DIN-Rail Sounder Control Unit .....................................80 

55000-830 XP95A Mini Priority Switch Monitor Module ..... 106 

55000-831 XP95A Mini Switch Monitor Module .................... 106 

55000-832 Mini Switch Monitor with fly leads (Interrupt).....74 

55000-833 Mini Switch Monitor with fly leads ...........................74 

55000-835 AlarmSense Alarm Relay ............................................37 

55000-841 Switch Monitor Plus ........................................................71 

55000-843 Switch Monitor .................................................................71 

55000-845 Zone Monitor Unit ...........................................................71 

55000-847 Input/Output Unit ............................................................70 

55000-849 Output Unit .........................................................................70 

55000-852 Sounder Control Unit ......................................................70 

55000-855 XP95 Protocol Translator (Single Channel) ............97 

55000-856 XP95 Protocol Translator (Dual Channel) ...............97 

55000-863 XP95A Relay Output Module ................................... 107 

55000-870 XP95 Test Set ................................................................. 117 

55000-872 Printer for XP95 Test Set ........................................... 117 

55000-875 Mains Switching Input/Output Unit ..........................71 

55000-877 Loop-Powered Beacon Red ........................................59 

55000-878 Loop-Powered Beacon Clear Lens Red Flash .......59 

55000-879 Loop-Powered Beacon Amber ..................................59 

55000-885 XP95 Multisensor Detector ..........................................17 

55000-886 XP95A Multisensor Detector ................................... 104 

55000-894 AlarmSense Manual Call Point (Surface) ...............80 

55100-940 XP95 IS Manual Call Point Without Flap - Red ......96 

55100-942 XP95 IS Manual Call Point Without Flap - Yellow ..96 

55100-944 XP95 IS Manual Call Point Without Flap - 

Blue/White .........................................................................96 

55000-945 XP95 IS Manual Call Point With Flap - 

Blue/White .........................................................................96 

55000-960 XP95 IS Manual Call Point MEDC Break 

Glass - Red .........................................................................97 


Glass with flap - Red ......................................................97 


Glass - Yellow ...................................................................97 


Glass with flap - Yellow ................................................97 


Glass - Blue ........................................................................97 


Glass with flap - Blue .....................................................97 


Glass - Black/Yellow Stripes ........................................97 


Glass with flap - Black/Yellow Stripes ....................97 

55000-970 XP95 IS Manual Call Point MEDC Push 

Button - Red ......................................................................97 


Button - Yellow ................................................................97 


Button - Blue .....................................................................97 


Button - Black/Yellow Stripes.....................................97 

55100-905 XP95 Manual Call Point - Red (Surface) .................79 

55100-908 XP95 Manual Call Point with Isolator - Red 

(Surface) .............................................................................79 

58000-300 Discovery CO Fire Detector..........................................10 

58000-400 Discovery Heat Detector ..............................................10

132 

Index: Sequential Part Number List 

58000-400MAR Discovery Marine Heat Detector ...............................88 

58000-450 Discovery UL Heat Detector .................................... 113 

58000-500 Discovery Ionisation Smoke Detector .....................10 

58000-500MAR Discovery Marine Ionisation Smoke Detector .....88 

58000-550 Discovery UL Ionization Smoke Detector ............ 113 

58000-600 Discovery Optical Smoke Detector...........................10 

58000-600MAR Discovery Marine Optical Smoke Detector ...........88 

58000-650 Discovery UL Photo-Electric Smoke Detector ... 113 

58000-700 Discovery Multisensor Detector ................................10 

58000-700MAR Discovery Marine Multisensor ....................................88 

55000-797 DIN-Rail Mains Input/Output Unit .............................76 

58000-750 Discovery UL Multisensor Detector ....................... 113 

58100-908 Discovery Manual Call Point with Isolator - 

Red (Surface) ....................................................................79 

58100-910 Discovery Manual Call Point - Red (Surface) ........79 

51800-920 Discovery Manual Call Point (non standard) 

White ...................................................................................79 


Yellow ..................................................................................79 


Blue .......................................................................................79 


Green ...................................................................................79 

58100-950 Waterproof Manual Call Point - Red ........................80 

58100-951 Waterproof Manual Call Point with Isolator - 

Red ........................................................................................80 

58100-970MAR Discovery Marine Manual Call Point .......................89 

ORB-BA-10008-APO S65 to Orbis Base Adaptor ..........................................85 

ORB-BA-50008-APO Orbis IS Adaptor ............................................................ 100 

ORB-DB-00003-APO TimeSaver Diode Base ..................................................27 

ORB-HB-00020-APO Orbis Heater Base ...........................................................28 

ORB-HT-11001-APO Orbis A1R Heat Detector Standard ...........................26 

ORB-HT-11002-APO Orbis A2S Heat Detector Standard ...........................26 

ORB-HT-11003-APO Orbis BR Heat Detector Standard ..............................26 

ORB-HT-11004-APO Orbis BS Heat Detector Standard ..............................26 

ORB-HT-11005-APO Orbis CR Heat Detector Standard ..............................26 

ORB-HT-11006-APO Orbis CS Heat Detector Standard ..............................26 

ORB-HT-11013-APO Orbis A1R Heat Detector with flashing LED ..........26 

ORB-HT-11014-APO Orbis A2S Heat Detector with flashing LED ..........26 

ORB-HT-11015-APO Orbis BR Heat Detector with flashing LED .............26 

ORB-HT-11016-APO Orbis BS Heat Detector with flashing LED .............26 

ORB-HT-11017-APO Orbis CR Heat Detector with flashing LED .............26 

ORB-HT-11018-APO Orbis CS Heat Detector with flashing LED ..............26 

ORB-HT-11166-APO Orbis A1S Heat Detector ..............................................26 

ORB-HT-11167-APO Orbis A1S Heat Detector with flashing LED ..........26 

ORB-HT-41001-MAR Orbis Marine A1R Heat Detector ...............................91 

ORB-HT-41002-MAR Orbis Marine A2S Heat Detector ...............................91 

ORB-HT-41003-MAR Orbis Marine BR Heat Detector ..................................91 

ORB-HT-41004-MAR Orbis Marine BS Heat Detector ..................................91 

ORB-HT-41005-MAR Orbis Marine CR Heat Detector ..................................91 

ORB-HT-41006-MAR Orbis Marine CS Heat Detector ..................................91 

ORB-HT-41013-MAR Orbis Marine A1R Heat Detector with 

flashing LED ........................................................................91 

ORB-HT-41014-MAR Orbis Marine A2S Heat Detector with 

flashing LED ........................................................................91 

ORB-HT-41015-MAR Orbis Marine BR Heat Detector with 

flashing LED ........................................................................91 

ORB-HT-41016-MAR Orbis Marine BS Heat Detector with 

flashing LED ........................................................................91 

ORB-HT-41017-MAR Orbis Marine CR Heat Detector with 

flashing LED ........................................................................91 

ORB-HT-41018-MAR Orbis Marine CS Heat Detector with 

flashing LED ........................................................................91 

ORB-HT-51145-APO Orbis IS A1R Heat Detector .........................................99 

ORB-HT-51146-APO Orbis IS A1R Heat Detector with flashing LED......99 

ORB-HT-51147-APO Orbis IS A2S Heat Detector ..........................................99 

ORB-HT-51148-APO Orbis IS A2S Heat Detector with flashing LED ......99 

ORB-HT-51149-APO Orbis IS BR Heat Detector ............................................99 

ORB-HT-51150-APO Orbis IS BR Heat Detector with flashing LED ........99 

ORB-HT-51151-APO Orbis IS BS Heat Detector .............................................99 

ORB-HT-51152-APO Orbis IS BS Heat Detector with flashing LED .........99 

ORB-HT-51153-APO Orbis IS CR Heat Detector .............................................99 

ORB-HT-51154-APO Orbis IS CR Heat Detector with flashing LED .........99 

ORB-HT-51155-APO Orbis IS CS Heat Detector .............................................99 

ORB-HT-51156-APO Orbis IS CS Heat Detector with flashing LED .........99 

ORB-HT-51157-APO Orbis IS A1S Heat Detector ..........................................99 

ORB-HT-51158-APO Orbis IS A1S Heat Detector with flashing LED ......99 

ORB-MB 50018-APO Orbis IS Timesaver Base ........................................... 100 

ORB-MB-00001-APO TimeSaver Base ...............................................................27 

ORB-MB-00002-APO TimeSaver LX Base .........................................................27 

ORB-MB-00012-APO Orbis LX Base ....................................................................27 

ORB-MB-00019-APO TimeSaver Deep Base ...................................................28 

ORB-MB-00001-MAR Orbis Marine TimeSaver Base ....................................92 

ORB-OH-13001-APO Orbis Multisensor Detector ..........................................26 

ORB-OH-13003-APO Orbis Multisensor Detector with 

flashing LED ........................................................................26 

ORB-OH-43001-MAR Orbis Marine Multisensor Detector ..........................91 

ORB-OH-43003-MAR Orbis Marine Multisensor Detector 

with flashing LED ............................................................91 

ORB-OH-53027-APO Orbis IS Multisensor Detector .....................................99 

ORB-OH-53028-APO Orbis IS Multisensor with flashing LED ....................99 

ORB-OP-12001-APO Orbis Optical Smoke Detector ....................................26 

ORB-OP-12003-APO Orbis Optical Smoke Detector with 

flashing LED ........................................................................26 

ORB-OP-42001-MAR Orbis Marine Optical Smoke Detector ....................91 

ORB-OP-42003-MAR Orbis Marine Optical Smoke Detector 

with flashing LED .............................................................91 

ORB-OP-52027-APO Orbis IS Optical Smoke Detector ...............................99 

ORB-OP-52028-APO Orbis IS Optical Smoke Detector with 

flashing LED ........................................................................99 

ORB-RB-10004-APO TimeSaver Relay Base ...................................................27 

ORB-RB-40004-MAR Orbis Marine Relay Base...............................................92 

ORB-SW-10005-APO Sav-Wire Base ..................................................................29 

XPA-CB-11170-APO XPander A1R Heat Detector and Mounting Base..42 

XPA-CB-11171-APO XPander CS Heat Detector and Mounting Base ..42 

XPA-CB-12034-APO XPander Optical Smoke Detector and 

Mounting Base .................................................................42 

XPA-CB-13032-APO XPander Multisensor Detector and 

Mounting Base .................................................................42 

XPA-CB-14001-APO XPander Sounder and Sounder Base Red .............89 

XPA-CB-14002-APO XPander Sounder and Sounder Base White .........89 

XPA-CB-14003-APO XPander Red Sounder Beacon and Red 

Sounder Base ....................................................................63 

XPA-CB-14004-APO XPander Amber Sounder Beacon and 

White Sounder Base .......................................................63 

XPA-CB-14005-APO XPander Clear Sounder Beacon and 

White Sounder Base .......................................................63 

XPA-IN-14007-APO XPander Interface Unit ..................................................43 

XPA-MC-14006-APO XPander Manual Call Point ...........................................80 

XPA-TE-14010-APO XPander Survey Tool ......................................................43

AlarmSense 35 

AlarmSense Alarm Relay ..........................................55000-835 ........................37 

AlarmSense A1R Heat Detector (Standard) .......55000-190 ........................36 

AlarmSense A1R Heat Detector and 

Sounder Base..................................................................55000-196 ........................36 

AlarmSense A1R Heat Detector and 

Sounder Beacon Base .................................................55000-198 ........................36 

AlarmSense Base ..........................................................45681-244 ........................37 

AlarmSense CS Heat Detector (High Temp) ......55000-193 ........................36 

AlarmSense CS Heat Detector and 

Sounder Base..................................................................55000-197 ........................36 

AlarmSense CS Heat Detector and 

Sounder Beacon Base .................................................55000-199 ........................36 


Smoke Detector ............................................................55000-391 ........................36 


Smoke Detector and Sounder Base ......................55000-393 ........................36 


Smoke Detector and Sounder Beacon Base ......55000-395 ........................36 

AlarmSense Manual Call Point (Flush) ..................55000-893 ........................80 

AlarmSense Manual Call Point (Surface) .............55000-894 ........................80 

AlarmSense Optical Smoke Detector ...................55000-390 ........................36 


and Sounder Base .........................................................55000-392 ........................36 


and Sounder Beacon Base ........................................55000-394 ........................36 

AlarmSense Red Cap ...................................................45681-295 ................ 57, 65 

AlarmSense Sounder Base ........................................45681-510 ........................57 

AlarmSense Sounder Base LR ................................45681-341 ........................57 

AlarmSense Sounder Beacon Base ......................45681-509 ........................65 

AlarmSense Sounder Beacon Base LR .................45681-340 ........................65 

AlarmSense White Cap ...............................................45681-294 ................ 57, 65 

AV Accessories 66 

Beacon Enclosure ..........................................................29600-318 ........................67 

Magnetic Wand .............................................................29650-001 ........................67 

Base Sounders 55 

AlarmSense Sounder Base ........................................45681-510 ........................57 

AlarmSense Sounder Base LR ................................45681-341 ........................57 

Ancillary Base Sounder ...............................................45681-276 ........................56 

Integrated Base Sounder ...........................................45681-278 ........................56 

Integrated Base Sounder - Slow Whoop .............45681-291 ........................56 

Integrated Base Sounder - Slow Whoop 

with Isolator ....................................................................45681-290 ........................56 

Integrated Base Sounder DIN-tone 

with Isolator ....................................................................45681-300 ........................56 

Integrated Base Sounder with Isolator .................45681-277 ........................56 

Intelligent Base Sounder ...........................................45681-265 ........................56 

Intelligent Base Sounder for Isolating Base ........45681-266 ........................56 

Intelligent Base Sounder Slow Whoop ................45681-267 ........................56 

Intelligent Base Sounder Slow Whoop 

for Isolating Base ...........................................................45681-268 ........................56 

Red Cap (for Intelligent Base Sounder) ................29600-257 ........................56 

Red Cap (for Integrated Base Sounder) ...............45681-293 ........................56 

Series 65 Sounder Base ...........................................45681-512 ........................57 

Index 

Product 

Index: Product 133 

Series 65 Sounder Base with Diode ......................45681-513 ........................57 

White Cap (for Intelligent Base Sounder) ............26900-256 ........................56 

White Cap (for Integrated Base Sounder) ...........45681-292 ........................56 

Beacon Bases 60 

Loop-Powered Beacon Base with Isolator .........45681-333 ........................61 

Loop-Powered Beacon Base ....................................45681-335 ........................61 

Loop-Powered Beacon Base with 

Australian Flash ..............................................................45681-337 ........................61 

Red Cap .............................................................................45681-293 ........................61 

White Cap .........................................................................45681-292 ........................61 

Beacons 58 


Intelligent Open-Area Beacon Red Lens ..................55000-009 ........................59 

Intelligent Open-Area Beacon Clear Lens ..................55000-010 ........................59 

Loop-Powered Beacon Amber ...............................55000-879 ........................59 

Loop-Powered Beacon Clear Lens Red Flash ....55000-878 ........................59 

Loop-Powered Beacon Red ......................................55000-877 ........................59 

DIN-Rail Interfaces 75 

DIN-Rail Dual Isolator ...................................................55000-802 ........................77 

DIN-Rail Input/Output Unit.........................................55000-803 ........................76 

DIN-Rail Interface Enclosure (10 units) .................29600-240 ................ 77, 85 

DIN-Rail Interface Enclosure (4 units)....................29600-239 ................ 77, 85 

DIN-Rail Mains Input/Output Unit ...........................55000-797 ........................76 

DIN-Rail Output Unit .....................................................55000-804 ........................76 

DIN-Rail Sounder Controller (5 Amperes) ...........55000-182 ........................76

134 

Index: Product 

DIN-Rail Switch Monitor .............................................55000-822 ........................76 

DIN-Rail Switch Monitor Plus ....................................55000-821 ........................77 

DIN-Rail Zone Monitor with Isolator.......................55000-812 ........................77 

Mini Switch Monitor .....................................................55000-760 ........................77 

Discovery 9 

Discovery Carbon Monoxide Fire Detector .........58000-300 ........................10 

Discovery Heat Detector ............................................58000-400 ........................10 

Discovery Ionisation Smoke Detector ...................58000-500 ........................10 

Discovery Manual Call Point (non standard) 

White..................................................................................51800-920 ........................79 


(non standard) Yellow ................................................51800-927 ........................79 


(non standard) Blue .....................................................58100-928 ........................79 


(non standard) Green..................................................58100-929 ........................79 

Discovery Manual Call Point - Red (Surface) ......58100-910 ........................79 

Discovery Manual Call Point with Isolator - 

Red (Surface) ..................................................................58100-908 ........................79 

Discovery Multisensor Detector ..............................58000-700 ........................10 

Discovery Optical Smoke Detector ........................58000-600 ........................10 

Discovery Programmer ..............................................53832-030 ..................... 117 

Discovery Sounder Beacon Base ............................45681-393 ........................65 

Intelligent Deep Base ..................................................45681-209 ........................11 

Isolator ...............................................................................55000-720 ........................11 

Intelligent Mounting Base ..........................................45681-210 ........................11 

Isolating Base ..................................................................45681-284 ........................11 

MiniDisc Remote Indicator.........................................53830-070 ........................12 

Discovery Marine 87 

Discovery Marine Heat Detector ............................58000-400MAR ..............88 

Discovery Marine Ionisation Smoke Detector ...58000-500MAR ..............88 

Discovery Marine Isolator ..........................................55000-700MAR ..............88 

Discovery Marine Isolator Base ...............................45681-211MAR ..............89 

Discovery Marine Manual Call Point .....................58100-970MAR ..............89 

Discovery Marine Mounting Base ..........................45681-210MAR ..............89 

Discovery Marine Multisensor .................................58000-700MAR ..............88 

Discovery Marine Optical Smoke Detector .........58000-600MAR ..............88 

Discovery UL 112 

Discovery UL Heat Detector ....................................58000-450 ..................... 113 

Discovery UL Ionization Smoke Detector ............58000-550 ..................... 113 

Discovery UL Multisensor Detector ........................58000-750 ..................... 113 

Discovery UL Photo-Electric Smoke Detector ....58000-650 ..................... 113 

XP95A Isolating Base ...................................................45681-321USA ............. 114 

XP95A 4” Mounting Base ..........................................45681-210USA ............. 114 


XP95A E-Z Fit Base .......................................................45681-250 ..................... 114 

XP95A Isolator ...............................................................55000-750 ..................... 114 

XP95A Isolator Base .....................................................45681-211USA ............. 114 


AlarmSense Manual Call Point (Flush) ..................55000-893 ........................80 

AlarmSense Manual Call Point (Surface) .............55000-894 ........................80 

Discovery Manual Call Point - Red (Surface) ......58100-910 ........................79 

Discovery Manual Call Point with Isolator - 

Red (Surface) ..................................................................58100-908 ........................79 

Transparent Hinged Cover for Manual 

Call Point ...........................................................................26729-152 ........................79 

Waterproof Manual Call Point - Red ......................58100-950 ........................80 

Waterproof Manual Call Point with 

Isolator - Red ...................................................................58100-951 ........................80 

XP95 Manual Call Point - Red (Surface) ...............55100-905 ........................79 

XP95 Manual Call Point with Isolator - 

Red (Surface) ..................................................................55100-908 ........................79 

XPander Manual Call Point ........................................XPA-MC-14006-APO .....80 

Mini Interfaces 73 

Mini Switch Monitor .....................................................55000-760 ........................74 

XP95 Mini Switch Monitor with fly leads ............55000-833 ........................74 

XP95 Mini Switch Monitor with fly leads 

(Interrupt) .........................................................................55000-832 ........................74 


1.5mm Hexagonal Driver ..........................................29600-095 ........................85 

Backplate ..........................................................................45681-233 ........................83 


Conduit Box .....................................................................45681-204 ........................83 

Deckhead Adaptor PG16-M20 ................................27249-005 ........................84 

Detector Ceiling Tile Mounting Box .......................45681-309 ........................84 

DIN-Rail Interface Enclosure (10 units) .................29600-240 ........................85 

DIN-Rail Interface Enclosure (4 units)....................29600-239 ........................85 

Metal Deckhead Mounting Box (M20) ................29600-139 ........................84 

Metal Deckhead Mounting Box (PG16) ...............29600-131 ........................84 

Module Base ...................................................................38531-822 ........................83 

Polycarbonate Deckhead Mounting Box .............45681-217 ........................84 

Series 65 to Orbis Base Adaptor .............................ORB-BA-10008-APO .....85 

Series 90 to XP95 Base Adaptor .............................45681-238 ........................85 

Series 65 Base Cover .................................................45681-370 ........................83 

Sounder Ceiling Plate ...................................................45681-311 ........................83 

Sounder Ceiling Tile Mounting Box ........................45681-310 ........................87 

XP95 Base Cover .........................................................45681-380 ........................83 

Orbis 25 


Orbis A1R Heat Detector ............................................ORB-HT-11001-APO ......26 

Orbis A1R Heat Detector with flashing LED ........ORB-HT-11013-APO ......26 

Orbis A1S Heat Detector ............................................ORB-HT-11166-APO ......26 

Orbis A1S Heat Detector with flashing LED ........ORB-HT-11167-APO ......26 

Orbis A2S Heat Detector ............................................ORB-HT-11002-APO ......26 

Orbis A2S Heat Detector with flashing LED ........ORB-HT-11014-APO ......26 

Orbis BR Heat Detector ...............................................ORB-HT-11003-APO ......26 

Orbis BR Heat Detector with flashing LED ...........ORB-HT-11015-APO ......26 

Orbis BS Heat Detector ...............................................ORB-HT-11004-APO ......26 

Orbis BS Heat Detector with flashing LED ...........ORB-HT-11016-APO ......26 

Orbis CR Heat Detector ...............................................ORB-HT-11005-APO ......26 

Orbis CR Heat Detector with flashing LED ...........ORB-HT-11017-APO ......26 

Orbis CS Heat Detector ...............................................ORB-HT-11006-APO ......26 

Orbis CS Heat Detector with flashing LED ...........ORB-HT-11018-APO ......26

Orbis LX Base ..................................................................ORB-MB-00012-APO ....27 

Orbis Duct Detector ......................................................53546-023 ........................51 

Orbis Heater Base .........................................................ORB-HB-00020-APO .....28 

Orbis Multisensor Detector .......................................ORB-OH-13001-APO .....26 

Orbis Multisensor Detector with 

flashing LED .....................................................................ORB-OH-13003-APO .....26 

Orbis Optical Smoke Detector ..................................ORB-OP-12001-APO .....26 

Orbis Optical Smoke Detector with 

flashing LED .....................................................................ORB-OP-12003-APO .....26 

TimeSaver Base .............................................................ORB-MB-00001-APO ....27 

TimeSaver Deep Base .................................................ORB-MB-00019-APO ....28 

TimeSaver Diode Base ................................................ORB-DB-00003-APO .....27 

TimeSaver LX Base .......................................................ORB-MB-00002-APO ....27 

TimeSaver Relay Base ................................................ORB-RB-10004-APO ......27 

Sav-Wire Base ................................................................ORB-SW-10005-APO ....28 


Waterproof Base Cover ..............................................45681-519 ........................28 

Orbis IS 98 

Galvanic Barrier ..............................................................29600-378 ..................... 100 

Orbis IS A1R Heat Detector .......................................ORB-HT-51145-APO ......99 

Orbis IS A1R Heat Detector with flashing LED .....ORB-HT-51146-APO ......99 

Orbis IS A1S Heat Detector .......................................ORB-HT-51157-APO ......99 

Orbis IS A1S Heat Detector with flashing LED ......ORB-HT-51158-APO .......99 

Orbis IS A2S Heat Detector ...........................................ORB-HT-51147-APO .......99 

Orbis IS A2S Heat Detector with flashing LED ......ORB-HT-51148-APO .......99 

Orbis IS Adaptor .................................................................ORB-BA-50008-APO ...100 

Orbis IS BR Heat Detector ..............................................ORB-HT-51149-APO .......99 

Orbis IS BR Heat Detector with flashing LED .........ORB-HT-51150-APO .......99 

Orbis IS BS Heat Detector ..............................................ORB-HT-51151-APO .......99 

Orbis IS BS Heat Detector with flashing LED .........ORB-HT-51152-APO .......99 

Orbis IS CR Heat Detector ..............................................ORB-HT-51153-APO .......99 

Orbis IS CR Heat Detector with flashing LED .........ORB-HT-51154-APO .......99 

Orbis IS CS Heat Detector ..............................................ORB-HT-51155-APO .......99 

Orbis IS CS Heat Detector with flashing LED .........ORB-HT-51156-APO .......99 

Orbis IS Multisensor Detector ...................................ORB-OH-53027-APO .....99 

Orbis IS Multisensor with flashing LED ..................ORB-OH-53028-APO .....99 

Orbis IS Optical Smoke Detector .............................ORB-OP-52027-APO .....99 

Orbis IS Optical Smoke Detector with 

flashing LED .....................................................................ORB-OP-52028-APO .....99 

Orbis IS Timesaver IS Base .......................................ORB-MB-50018-APO .100 

Orbis Marine 90 

Orbis Marine A1R Heat Detector ............................ORB-HT-41001-MAR .....91 

Orbis Marine A1R Heat Detector with 

flashing LED .....................................................................ORB-HT-41013-MAR .....91 

Orbis Marine A2S Heat Detector ............................ORB-HT-41002-MAR .....91 

Orbis Marine A2S Heat Detector with 


Orbis Marine BR Heat Detector ...............................ORB-HT-41003-MAR .....91 

Orbis Marine BR Heat Detector with 


Orbis Marine BS Heat Detector ...............................ORB-HT-41004-MAR .....91 

Orbis Marine BS Heat Detector with 



Orbis Marine CR Heat Detector ...............................ORB-HT-41005-MAR .....91 

Orbis Marine CR Heat Detector with 


Orbis Marine CS Heat Detector ................................ORB-HT-41006-MAR .....91 

Orbis Marine CS Heat Detector with 


Orbis Marine Multisensor Detector ........................ORB-OH-43001-MAR ....91 

Orbis Marine Optical Smoke Detector ..................ORB-OP-42001-MAR ....91 

Orbis Marine Relay Base ............................................ORB-RB-40004-MAR .....92 

Orbis Marine TimeSaver Base ..................................ORB-MB-00001-MAR ...92 

Orbis Marine Multisensor Detector with 

flashing LED .....................................................................ORB-OH-43003-MAR ....91 

Orbis Marine Optical Smoke Detector 

with flashing LED ...........................................................ORB-OP-42003-MAR ....91 

Series 65A 108 

Series 65A 135˚F Heat Detector flashing LED ......55000-139 ..................... 109 

Series 65A 135˚F Heat Detector flashing LED 

and magnetic test switch ..........................................55000-138 ..................... 109 

Series 65A 135˚F Heat Detector Standard ..........55000-140 ..................... 109 









Series 65A 4” 12V End-of-Line Relay Base .........45681-257 ..................... 110 

Series 65A 4” 24V End-of-Line Relay Base .........45681-258 ..................... 110 

Series 65A 4” Auxiliary Relay Base ........................45681-256 ..................... 110 

Series 65A 4” Standard Base ...................................45681-200USA ............. 110 

Series 65A 4” Standard Relay Base .......................45681-255 ..................... 110 

Series 65A 6” E-Z Fit Base .........................................45681-251 ..................... 111 

Series 65A 6” Low Profile Base ...............................45681-232 ..................... 110 

Series 65A 6” Standard Base ...................................45681-220USA ............. 110 


flashing LED ...................................................................55000-226 ..................... 109 


flashing LED and magnetic test switch ................55000-225 ..................... 109 


Standard ...........................................................................55000-227 ..................... 109 

Series 65A Photo-Electric Smoke Detector 

flashing LED ...................................................................55000-326 ..................... 109 


flashing LED and magnetic test switch ................55000-325 ..................... 109 


Standard ...........................................................................55000-327 ..................... 109 

Series 65 29 


Series 65 12V Relay Base ..........................................45681-508 ........................31 

Series 65 Auxiliary Relay Base ...............................45681-246 ........................31 

Series 65 Base Cover .................................................45681-370 ........................83 

Series 65 Diode Base ...................................................45681-201 ........................31

136 


Series 65 End-of-Line Relay Base (12V) ..............45681-247 ........................32 

Series 65 End-of-Line Relay Base (24V) ..............45681-248 ........................32 

Series 65 Sav-Wire Base ............................................45681-206 ........................32 

Series 65 Standard Base ............................................45681-200 ........................31 

Series 65 A1R Heat Detector flashing LED ..........55000-121 ........................31 

Series 65 A1R Heat Detector flashing LED 

and magnetic test switch ..........................................55000-120 ........................31 

Series 65 A1R Heat Detector Standard ................55000-122 ........................31 

Series 65 BR Heat Detector flashing LED ..........55000-126 ........................31 

Series 65 BR Heat Detector flashing LED 


Series 65 BR Heat Detector Standard ...................55000-127 ........................31 

Series 65 CR Heat Detector flashing LED ..........55000-131 ........................31 

Series 65 CR Heat Detector flashing LED 


Series 65 CR Heat Detector Standard ...................55000-132 ........................31 

Series 65 CS Heat Detector flashing LED ...........55000-136 ........................31 

Series 65 CS Heat Detector flashing LED 


Series 65 CS Heat Detector Standard ...................55000-137 ........................31 

Series 65 Integrating Ionisation Smoke 

Detector ............................................................................55000-220 ........................30 

Series 65 Integrating Ionisation Smoke 

Detector flashing LED ..................................................55000-219 ........................30 

Series 65 Integrating Ionisation Smoke Detector 

flashing LED and magnetic test switch .................55000-218 ........................30 


flashing LED .....................................................................55000-216 ........................30 


flashing LED and magnetic test switch ................55000-215 ........................30 


Standard ...........................................................................55000-217 ........................30 


flashing LED ...................................................................55000-316 ........................30 


flashing LED and magnetic test switch ................55000-315 ........................30 

Series 65 Optical Smoke Detector Standard ......55000-317 ........................30 

Series 65 Sounder Base ..............................................45681-512 ........................57 

Series 65 Standard Relay Base ...............................45681-245 ........................32 

Sounder Beacon Bases 64 

AlarmSense Red Cap ...................................................45681-295 ........................65 

AlarmSense Sounder Beacon Base ......................45681-509 ........................65 

AlarmSense Sounder Beacon Base LR .................45681-340 ........................65 

AlarmSense White Cap ...............................................45681-294 ........................65 

Discovery Sounder Beacon Base ............................45681-393 ........................65 

Red Cap .............................................................................45681-293 ........................65 

Sounder Beacon Base ..............................................45681-331 ........................65 

Sounder Beacon Base Slow Whoop 

with Isolator ....................................................................45681-332 ........................65 

Sounder Beacon Base with Australian Tone ......45681-336 ........................65 

Sounder Beacon Base with Isolator .......................45681-330 ........................65 

Sounder Beacon Base with Isolator DIN-Tone ....45681-334 ........................65 

Sounder Beacon Base with NZ Tone ....................45681-338 ........................65 

White Cap .........................................................................45681-292 ........................65 

Sounder Beacons 62 


Clear Lens (Sonos) ........................................................55000-006 ........................63 


Red Lens (Sonos) ..........................................................55000-005 ........................63 

Multi-Tone Open Area Sounder Beacon Red.....55000-291 ........................63 

Multi-Tone Open Area Sounder Beacon Red 

with Isolator ....................................................................55000-293 ........................63 

Multi-Tone Open Area Sounder Beacon White ..55000-292 ........................63 

Multi-Tone Open Area Sounder Beacon White 

with Isolator ....................................................................55000-294 ........................63 


Sounder Beacon Red ...................................................55000-296 ........................63 


Sounder Beacon Red with Isolator .........................55000-298 ........................63 


Sounder Beacon White ...............................................55000-297 ........................63 


Sounder Beacon White with Isolator ....................55000-299 ........................63 

XPander Amber Sounder Beacon and 

White Sounder Base ....................................................XPA-CB-14004-APO ......63 

XPander Clear Sounder Beacon and 


XPander Red Sounder Beacon and 

Red Sounder Base ........................................................XPA-CB-14003-APO ......63 

Sounders 53 

Intelligent 100dB(A) Open-Area Sounder Red..55000-278 ........................54 

Intelligent 100dB(A) Open-Area Sounder 

Slow Whoop Red ..........................................................55000-276 ........................54 


Slow Whoop White ......................................................55000-277 ........................54 


White..................................................................................55000-279 ........................54 


Weatherproof Sounder Red ......................................55000-274 ........................54 


Weatherproof Sounder White ..................................55000-275 ........................54 

Intelligent Open-Area Sounder Red (Sonos)......55000-001 ........................54 

Intelligent Open-Area Sounder White (Sonos) ...55000-002 ........................54 

XPander Sounder and Sounder Base Red ...........XPA-CB-14001-APO ......54 

XPander Sounder and Sounder Base White .......XPA-CB-14002-APO ......54 

Specialist 44 

Base Mounted Flame Detector Bracket...............29600-458 ........................47 

Conventional Duct Smoke Detector ......................53546-021 ........................51 

Firebeam Adaptor Plate .............................................29600-353 ........................49 

Firebeam Beam Detector 5-40m ...........................29600-350 ........................49 

Firebeam Extension Kit 40-80m .............................29600-351 ........................49 

Firebeam Extension Kit 80-100m ...........................29600-352 ........................49 

Flame Detector Bracket ..............................................29600-203 ........................46 

Flame Detector Weathershield................................29600-206 ........................46 

Intelligent Base Mounted UV IR² Flame 

Detector ...........................................................................55000-023 ........................47 

Intelligent Base Mounted UV Flame Detector ...55000-022 ........................47 

Intelligent Base Mounted IR3 Flame 

Detector ............................................................................55000-024 ........................47

Intelligent Duct Detector ............................................53546-022 ........................51 

Intelligent Flameproof IR² Flame Detector ..........55000-295 ........................46 

Intelligent Flameproof IR³ Flame Detector ..........55000-021 ........................46 

Intelligent IR² Flame Detector ..................................55000-280 ........................46 

Intelligent IR 3 Flame Detector ..................................55000-020 ........................46 

Orbis Duct Detector ......................................................53546-023 ........................51 

Reflective Beam Detector (50-100m) .................55000-273 ........................49 

Reflective Beam Detector (5-50m).......................55000-268 ........................49 

Reflective Beam Detector Backbox .......................29600-241 ........................49 

Standard Interfaces 69 

Input/Output Unit ..........................................................55000-847 ........................70 

Mains Switching Input/Output Unit .......................55000-875 ........................71 

Output Unit ......................................................................55000-849 ........................70 

Sounder Control Unit ....................................................55000-852 ........................70 

Switch Monitor Plus .....................................................55000-841 ........................71 

Switch Monitor ...............................................................55000-843 ........................71 

Three Channel Input/Output Unit ...........................55000-588 ........................70 

Three Channel Input/Output Unit PCB only ........43781-588 ........................70 

Zone Monitor Unit .........................................................55000-845 ........................71 


1.5mm Hexagonal Driver (locks detectors 

to bases) .........................................................................29600-095 .................... 118 

Aerosol Test Gas ..........................................................29600-225 .................... 118 

Battery Batons ..............................................................29600-183 .................... 118 

Battery Charger (No Mains Lead)...........................29600-214 .................... 118 

Conventional Test Set .................................................53832-020 ..................... 117 

Cordless Heat Detector Tester ................................29600-213 .................... 118 

Cordless Heat Tester Kit ............................................29600-212 .................... 118 

CO Test Gas .....................................................................29600-235 ..................... 114 

Detector Extract Tool ..................................................29600-102 .................... 118 

Discovery Programmer ..............................................53832-030 ..................... 117 

Extension Pole, 1.13m ...............................................29600-103 .................... 118 

Flame Sensor Test Unit and Case ...........................29600-226 ..................... 117 

Heat Detector Test Pole (110V) .............................29600-110 .................... 118 

Heat Detector Test Pole (240V) ..............................29600-101 .................... 118 

Printer for XP95 Test Set ............................................55000-872 ..................... 117 

Smoke Dispenser Head ............................................29600-100 .................... 118 

Telescopic Pole, 1.26m to 4.5m ............................29600-104 .................... 118 

Detector Duster .............................................................29600-449 ..................... 118 

Smoke/Heat Unit ..........................................................29600-459 ..................... 118 

Smoke/Heat Kit .............................................................29600-460 ..................... 118 

Smoke/Heat/CO Unit ..................................................29600-461 ..................... 118 

Smoke/Heat/CO Kit .....................................................29600-462 ..................... 118 

6-Pack Replacement Smoke Capsule ...................29600-463 ..................... 118 

3-Pack Replacement Smoke Capsule ...................29600-464 ..................... 118 

6-Pack Replacement CO Capsule ...........................29600-465 ..................... 118 

3-Pack Replacement CO Capsule ...........................29600-466 ..................... 118 

UK Mains Lead ..............................................................29600-215 .................... 118 

XP95 Test Set .................................................................55000-870 ..................... 117 

XPERT Card Insertion Tool .........................................45681-235 .................... 118 


XP95 16 

Intelligent Deep Base ..................................................45681-209 ........................19 

Intelligent Mounting Base ..........................................45681-210 ........................18 

Isolator ...............................................................................55000-720 ........................18 

Isolator Base ....................................................................45681-211 ........................18 

Low Power Relay Base ...............................................45681-242 ........................19 

New Isolating Base ......................................................45681-284 ........................18 



Printer for XP95 Test Set ............................................55000-872 ..................... 117 

Waterproof Base Cover ..............................................45681-519 ........................19 

XP95 Base Cover .........................................................45681-380 ........................83 

XP95 Heat Detector High Temperature ...............55000-401 ........................17 

XP95 Heat Detector Standard ..................................55000-400 ........................17 

XP95 Heater Base .........................................................45681-219 ........................19 

XP95 Ionisation Smoke Detector ............................55000-500 ........................17 

XP95 Manual Call Point - Red (Surface) ...............55100-905 ........................79 

XP95 Manual Call Point with Isolator - 

Red (Surface) ..................................................................55100-908 ........................79 

XP95 Multisensor Detector .......................................55000-885 ........................17 

XP95 Optical Smoke Detector .................................55000-600 ........................17 

XP95 Test Set .................................................................55000-870 ..................... 117 

XP95A 103 

XP95A Isolating Base ...................................................45681-321USA ............. 105 

XP95A 4” Low Power Relay Base ..........................45681-242USA ............. 106 



XP95A Dual Priority Switch Monitor Module .....55000-790 ..................... 107 

XP95A E-Z Fit Base .......................................................45681-250 ..................... 104 

XP95A Heat Detector ..................................................55000-450 ..................... 104 

XP95A Ionization Smoke Detector .........................55000-550 ..................... 104 

XP95A Isolator ...............................................................55000-750 ..................... 105 

XP95A Isolator Base .....................................................45681-211USA ............. 105 

XP95A Loop Powered Beam Detector ................55000-266 .....................104 

XP95A Mini Priority Switch Monitor Module ......55000-830 ..................... 106 

XP95A Mini Switch Monitor Module .....................55000-831 ..................... 106 

XP95A Multisensor Detector ....................................55000-886 ..................... 104 

XP95A Photo-Electric Smoke Detector ................55000-650 ..................... 104 

XP95A Priority Switch Monitor Module ................55000-806 ..................... 107 

XP95A Relay Output Module ...................................55000-863 ..................... 107 

XP95A Sounder Control Module .............................55000-825 ..................... 107 

XP95A Switch Monitor Input/Output Module ...55000-820 ..................... 107 

XP95A Switch Monitor Module ...............................55000-805 ..................... 106 

Mini Monitor Module ...................................................55000-765 ..................... 106 

XP95 IS 95 

IS Galvanic Barrier .........................................................29600-098 ........................97 

XP95 IS Heat Detector.................................................55000-440 ........................96 

XP95 IS Ionisation Smoke Detector .......................55000-540 ........................96 

XP95 IS Manual Call Point MEDC Break 

Glass - Black/Yellow Stripes .....................................55000-966 ........................97

138 



Glass - Blue ......................................................................55000-964 ........................97 


Glass - Red .......................................................................55000-960 ........................97 


Glass - Yellow .................................................................55000-962 ........................97 


Glass with flap - Black/Yellow Stripes ..................55000-967 ........................97 


Glass with flap - Blue ...................................................55000-965 ........................97 


Glass with flap - Red ....................................................55000-961 ........................97 


Glass with flap - Yellow ..............................................55000-963 ........................97 

XP95 IS Manual Call Point MEDC Push 

Button - Black/Yellow Stripes ..................................55000-973 ........................97 


Button - Blue ...................................................................55000-972 ........................97 


Button - Red ....................................................................55000-970 ........................97 


Button - Yellow ..............................................................55000-971 ........................97 

XP95 IS Manual Call Point With Flap - 

Blue/White.......................................................................55000-945 ........................97 

XP95 IS Manual Call Point Without Flap - 

Blue/White.......................................................................55100-944 ........................97 

XP95 IS Manual Call Point Without Flap - Red ...55100-940 ........................97 

XP95 IS Manual Call Point Without Flap - Yellow 55100-942 ........................97 

XP95 IS Mounting Base ..............................................45681-215 ........................97 

XP95 IS Optical Smoke Detector .............................55000-640 ........................97 

XP95 Protocol Translator (Dual) ..............................55000-856 ........................97 

XP95 Protocol Translator (Single) ...........................55000-855 ........................97 

XPander 41 

XPander A1R Heat Detector and Mounting Base ..XPA-CB-11170-APO ......42 

XPander Amber Sounder Beacon and 


XPander Clear Sounder Beacon and 


XPander CS Heat Detector and Mounting Base XPA-CB-11171-APO ......42 

XPander Interface Unit ................................................XPA-IN-14007-APO .......43 

XPander Manual Call Point ........................................XPA-MC-14006-APO .....80 

XPander Multisensor Detector and Mounting 

Base ....................................................................................XPA-CB-13032-APO ......42 

XPander Optical Smoke Detector and 

Mounting Base ...............................................................XPA-CB-12034-APO ......42 

XPander Red Sounder Beacon and 

Red Sounder Base ........................................................XPA-CB-14003-APO ......63 

XPander Sounder and Sounder Base Red ...........XPA-CB-14001-APO ......54 

XPander Sounder and Sounder Base White .......XPA-CB-14002-APO ......54 

XPander Survey Tool ...................................................XPA-TE-14010-APO .......43 

XPERT Cards 22 

Blank XPERT Card ..........................................................38531-771 ........................23 

Pre-Addressed XPERT Cards .....................................45682-127 ........................23

Apollo Overseas Offices 

Apollo America 

821 Ulrich Avenue 

Louisville 

Kentucky 

40219 

USA 

Tel: +1 502 964 6565 

Fax: +1 502 964 6229 

Email: infoUSA@apollo-fire.com 

Web: www.apollo-fire.com 

Apollo Germany 

Apollo GmbH 

Am Anger 31 

D-33332 Gütersloh 

Germany 

Tel: +49 5241 33060 

Fax: +49 5241 330629 

Email: verkauf@apollo-feuer.de 

Web: www.apollo-feuer.de 

Apollo Spain 

Apollo Fire Detectors S.A. 

Calle Rio Tietar 12 

Nave 6 

Pol Ind El Nogal 

28110 Algete 

Madrid 

Spain 

Tel: +34 9162 89209 

Fax: +34 9162 90168 

Email: información@apollo-fire.com 

Web: www.apollo-fire.es 

Apollo Ireland 

Apollo Ireland 

8 Willbrook Road 

Rathfarnham 

Dublin 14 

Republic of Ireland 

Tel: +353 1 493 3896 

Email: info-ireland@apollo-fire.co.uk 

Web: www.apollo-fire.ie 

Apollo China 

Apollo China 

24D Huamin Empire Plaza 

726 Yan An Road (W) 

Shanghai 

200050 

The People’s Republic of China 

Tel: +86 21 5237 0922 

Fax: +86 21 5237 0920 

Email: info-china@apollo-fire.com 

Web: www.apollo-fire.com.cn 

© Apollo Fire Detectors Ltd 2007-2009 

PP2327/2009/Issue 4

Fire detection equipment - VIS Security

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?