Trident Model RD Irons - Pro-Swing
Trident Model RD Irons - Pro-Swing
Trident Model RD Irons - Pro-Swing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ob72 1/26/05 11:02 AM Page 1<br />
PRSRT STD<br />
US POSTAGE PAID<br />
AKRON, OH<br />
PERMIT NO. 1352<br />
800.451.1995<br />
proswing.com<br />
2005<br />
Components Catalog<br />
The best golf components...anywhere.<br />
<strong>Trident</strong> TS Ti page 2 <strong>Trident</strong> SS Iron page 3 <strong>RD</strong> Hybrid page 4<br />
new 450cc RH/LH<br />
<strong>Trident</strong> HP+Iron page 7<br />
FG 460cc Ti page 10 Accura AG Iron page 18<br />
KB XD Ti page 21 Heathway iron page 23 CR5 Iron page 26<br />
Inside these pages, you’ll find the best golf components...anywhere!<br />
Our 2005 lineup is our best yet with 15 titanium drivers over 400cc, new hybrid<br />
styles, the latest in iron design technology, a greatly expanded shaft selection<br />
and we’ve added a number of tools/accessories too. Take a look inside, then give<br />
us a call. We look forward to hearing from you soon.<br />
.<strong>Pro</strong> <strong>Swing</strong>, Inc .330 Grandview Ave .Wadsworth, OH 44281<br />
RH/LH
ob72 1/26/05 11:02 AM Page 2<br />
<strong>Trident</strong> TS-10 410/450cc<br />
stock #410TS/450TS<br />
410cc RH only: 8o ,9 o<br />
,10 o<br />
and 12 o<br />
450cc RH: 8 o<br />
,9 o<br />
,10 o<br />
and 12 o<br />
450cc LH: 9 o<br />
,10 o<br />
and 12 o<br />
Requires our patented hosel collar insert system.<br />
[ 2 ]<br />
Patent Pending Design<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 114mm<br />
SP-700<br />
Requires an insert<br />
insert ring<br />
stock #HCIR2<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
58 o<br />
200<br />
53<br />
410<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 28mm<br />
Specs for the 410cc Ti drivers<br />
#1<br />
9 o<br />
58 o<br />
200<br />
53<br />
410<br />
Ti head comes with:<br />
2-6g screws, 1-4g screw.<br />
(additional screws available in: 2,4,6,8 and 10g).<br />
#1<br />
10 o<br />
58 o<br />
200<br />
53<br />
410<br />
#1<br />
12 o<br />
58 o<br />
200<br />
53<br />
410<br />
<strong>Trident</strong> Golf first introduced a high performance screw weight design<br />
about 5 years ago. Since then, screw weight designs have become so<br />
popular, that even the largest pro line companies, like Taylor Made tm ,<br />
are copying this design feature. The new TS-10 Tri Screw head is the<br />
next evolution of this design. Made with three removable weight<br />
screws (no special tool needed) spaced in an optimal balance configuration,<br />
the new TS-10 is the ultimate driver in stability and forgiveness.<br />
The back weights re-position the center of gravity low and deep<br />
in the clubhead. This decreases sidespin and backspin for longer carry<br />
and improved accuracy. In addition, the weights can be adjusted for<br />
lighter or heavier head weight to compensate for shaft length and weight<br />
or to add/decrease draw bias. The TS-10 ti also offers more weight variations,<br />
flexibility and ball flight options than Taylor Made tm does.<br />
Although not yet tested, we think the TS-10 ti with max COR face,<br />
will out perform pro line drivers in both accuracy and distance.<br />
We also offer TS-10 steel fairway woods in #3, #5 and #7.<br />
insert ferrule<br />
stock #INSFW<br />
Specs for the 450cc Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
57 o<br />
206<br />
56<br />
450<br />
#1<br />
9 o<br />
57 o<br />
206<br />
56<br />
450<br />
Specs for the TS-10 fairway woods<br />
club #3<br />
loft 15<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
58 o<br />
212<br />
38<br />
215<br />
#5<br />
19 o<br />
59 o<br />
218<br />
36<br />
205<br />
#7<br />
22 o<br />
60 o<br />
225<br />
35<br />
190<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
2 o closed face angles<br />
410cc RH only; 450cc RH/LH<br />
#1<br />
10 o<br />
57 o<br />
206<br />
56<br />
450<br />
<strong>Trident</strong> TS-10 Fairway Woods<br />
stock #TS10W<br />
RH only: #3, #5 and #7<br />
#1<br />
12 o<br />
57 o<br />
206<br />
56<br />
450
ob72 1/26/05 11:02 AM Page 3<br />
<strong>Trident</strong> SSI Multi-Layer <strong>Irons</strong><br />
stock #TSSI<br />
RH/LH: 3-PW, AW, SW and LW<br />
Requires our patented hosel collar insert system.<br />
can be bent up to 2 o for loft or lie<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 81mm<br />
blade height #5: 54mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
21 o<br />
59 o<br />
246<br />
2.5<br />
#4<br />
24 o<br />
60 o<br />
253<br />
2.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 34mm<br />
topline width: 8mm<br />
#5<br />
27 o<br />
60 o<br />
260<br />
2.5<br />
#6<br />
30 o<br />
61 o<br />
267<br />
2.0<br />
#7<br />
33 o<br />
62 o<br />
274<br />
1.5<br />
#8<br />
36 o<br />
63 o<br />
281<br />
1.0<br />
#9<br />
40 o<br />
64 o<br />
288<br />
1.0<br />
PW<br />
44 o<br />
64 o<br />
295<br />
0.5<br />
5 o<br />
AW<br />
48 o<br />
64 o<br />
295<br />
0.5<br />
4 o<br />
SW<br />
52 o<br />
64 o<br />
300<br />
0.5<br />
8 o<br />
LW<br />
58 o<br />
64 o<br />
300<br />
0.5<br />
6 o<br />
The future is now with the new <strong>Trident</strong> Multilayer<br />
“SSI” iron. Made with multiple layers of<br />
material, this beautiful iron head provides all the<br />
confidence building advantages of an extreme<br />
perimeter weighted style while maintaining the feel<br />
and performance of a muscle back design. The center<br />
of gravity has been moved rearward providing<br />
more stability at impact and added spin for green<br />
stopping power. Basically, the new SSI irons give a<br />
more confident set up, effortless solid accurate<br />
shots, and increased spin on the ball. Sounds like<br />
the iron we’re looking for!!<br />
LH due late Spring ‘05<br />
Sold in sets: 3-PW or 5-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
. very easy to hit irons throughout the set.<br />
. multi layer technology.<br />
This head requires an insert.<br />
insert ring<br />
stock #hciri<br />
insert ferrule<br />
stock #insfi<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
chrome finish<br />
RH only<br />
[ 3 ]
ob72 1/26/05 11:02 AM Page 4<br />
<strong>Trident</strong> <strong>Model</strong> <strong>RD</strong> Hybrid<br />
stock #HY<strong>RD</strong><br />
RH: 15 o ,18 o ,21 o *, 24 o ,27 o ,30 o and 34 o<br />
LH: 18 o ,21 o ,24 o and 27 o<br />
Must be countersunk for use with graphite shafts.<br />
Can not be bent for loft or lie.<br />
See page 71 for weight screw<br />
options.<br />
[ 4 ]<br />
Recommended<br />
Shafts (.335):<br />
Recommended<br />
Shafts (.370):<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Superlite L or A flex<br />
<strong>Trident</strong> Lite Weight<br />
Cross Fire<br />
For a higher trajectory, use:<br />
Cross Fire<br />
UST iRod Iron<br />
TX-90<br />
.335 or .370 hosel bore<br />
heel/toe #1: 90mm<br />
450ss Alloy<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Hybrid Xrt<br />
<strong>Trident</strong> UL 3.5<br />
Penley G.A.S.<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Hybrid Xrt<br />
Penley Hybrid Heater<br />
Custom Lite<br />
hardness: 36<br />
hosel depth: 30mm<br />
bottom of hosel to heel: 15mm<br />
club hybrid<br />
loft 15<br />
tip diam<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
.335<br />
58 o<br />
hybrid<br />
18<br />
225<br />
32<br />
130<br />
o<br />
.335<br />
58.5 o<br />
hybrid<br />
21<br />
230<br />
32<br />
130<br />
o<br />
.335<br />
59 o<br />
hybrid<br />
21<br />
235<br />
32<br />
120<br />
o *<br />
.370<br />
59 o<br />
hybrid<br />
24<br />
242<br />
32<br />
120<br />
o<br />
.370<br />
60 o<br />
hybrid<br />
27<br />
245<br />
32<br />
115<br />
o<br />
.370<br />
61 o<br />
hybrid<br />
30<br />
252<br />
32<br />
115<br />
o<br />
.370<br />
62 o<br />
hybrid<br />
34<br />
259<br />
32<br />
100<br />
o<br />
.370<br />
62.5 o<br />
266<br />
32<br />
100<br />
* 21 o available in .335 and .370 hosel bore.<br />
Hybrid clubs have become very popular with good reason. They<br />
are much easier to hit than most long irons and even some fairway<br />
woods. Now, <strong>Trident</strong> introduces the EASIEST TO HIT<br />
AND BEST PERFORMING HYBRID CLUBS ON THE<br />
MARKET! <strong>Trident</strong> invented the modern screw weight driver and<br />
has now incorporated screw weighting in a hybrid design. With<br />
the adjustable screw weight, it is easy to change club weight and<br />
trajectory. In addition, with more weight under and behind the<br />
ball, even the highest handicapper can hit a solid, accurate shot<br />
even off the tightest lie. But, to make hitting great shots even<br />
easier, we added our reduced drag sole (first introduced on our<br />
<strong>RD</strong> driver in 2001). Made with a hardened 450 alloy and thin<br />
rebound face, the <strong>RD</strong> Hybrids are THE BEST PERFORMING<br />
AND EASIEST CLUBS TO HIT ON THE MARKET.<br />
This head requires a ferrule.<br />
we recommend:<br />
3/8” Black<br />
stock #FMBIS, FMBS<br />
. comes standard with 18g screw installed.<br />
. available screws: 14g, 18g, 21g and 24g.<br />
. extremely easy to hit!<br />
. multiple loft selection to fill special need or gap.<br />
. weight screw adds forgiveness and performance.<br />
Exclusive<br />
For a lower trajectory, use:<br />
UST iRod Fairway<br />
Dynamic Gold<br />
Stealth 70<br />
For a lower trajectory, use:<br />
UST iRod Utility<br />
Dynamic Gold SL<br />
TX-Tour<br />
requires ferrule<br />
square face angles<br />
RH/LH
ob72 1/26/05 11:07 AM Page 5<br />
<strong>Trident</strong> <strong>Model</strong> <strong>RD</strong> <strong>Irons</strong><br />
stock #<strong>RD</strong>I<br />
RH only: 3-PW, SW, AW and LW<br />
Requires our patented hosel collar insert system.<br />
can be bent up to 2 o for loft or lie<br />
. better than pro line-guaranteed!<br />
. low center of gravity creates optimum trajectory.<br />
. high moment of inertia for forgiveness and distance.<br />
. progressive offsets.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 81mm<br />
blade height #5: 54mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
21 o<br />
59 o<br />
244<br />
3.5<br />
#4<br />
24 o<br />
60 o<br />
251<br />
3.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 32mm<br />
topline width: 7.5mm<br />
#5<br />
27 o<br />
61 o<br />
258<br />
3.0<br />
#6<br />
30 o<br />
62 o<br />
265<br />
2.5<br />
#7<br />
33 o<br />
62.5 o<br />
272<br />
2.0<br />
#8<br />
36 o<br />
63.5 o<br />
279<br />
1.5<br />
#9<br />
40 o<br />
64 o<br />
286<br />
1.0<br />
This head requires an insert.<br />
insert ring<br />
stock #hciri<br />
PW<br />
44 o<br />
64.5 o<br />
293<br />
1.0<br />
6 o<br />
The wider sole<br />
optimizes trajectory<br />
and provides added<br />
stability.<br />
AW<br />
49 o<br />
64.5 o<br />
300<br />
0.5<br />
5 o<br />
SW<br />
54 o<br />
64.5 o<br />
305<br />
0.5<br />
8 o<br />
insert ferrule<br />
stock #insfi<br />
LW<br />
58 o<br />
64.5 o<br />
305<br />
0.5<br />
6 o<br />
The <strong>RD</strong> design incorporates many new game improvement features:<br />
a wider, deeper undercut cavity moves weight back away<br />
from the face, a variable thickness face moves mass lower in the<br />
long irons and higher in the short irons for optimum trajectory,<br />
a slightly oversize head with medium thin topline builds confidence,<br />
an extra wide sole reduces fat shots while helping get<br />
shots airborne much easier, small but progressive offsets help<br />
alignment and to square the face at impact. The resulting <strong>RD</strong><br />
design is truly an ultimate distance iron but with an unusual<br />
shot pattern. The shot pattern is unusual because the <strong>RD</strong> irons<br />
not only have a high trajectory but it is a pro-like boring trajectory.<br />
Needless to say, a high boring shot promotes a dramatic<br />
increase in distance. That’s why we say the <strong>Model</strong> <strong>RD</strong> is longer<br />
and easier to hit than any pro line club on the market.<br />
Sold in sets: 3-PW, 5-PW, 6-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
mirror chrome finish<br />
right hand only<br />
[ 5 ]
ob72 1/26/05 11:07 AM Page 6<br />
<strong>Trident</strong> <strong>Model</strong> <strong>RD</strong> Titanium 400cc and 450cc<br />
400cc stock #<strong>RD</strong>TI 450cc stock #450<strong>RD</strong>TI<br />
RH only: 8 o ,9 o ,10 o ,12 o , and 15 o<br />
Requires our patented hosel collar insert system.<br />
[ 6 ]<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Ti Driver<br />
Specs for the <strong>RD</strong> 450 Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#7<br />
8 o<br />
57 o<br />
202<br />
57<br />
450<br />
#1<br />
9 o<br />
57 o<br />
202<br />
57<br />
450<br />
#1<br />
10 o<br />
57 o<br />
202<br />
57<br />
450<br />
#1<br />
12 o<br />
57 o<br />
202<br />
57<br />
450<br />
#1<br />
15 o<br />
57 o<br />
202<br />
57<br />
450<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 98mm<br />
SP-700 Ti (C-cup face)<br />
Specs for the <strong>RD</strong> 400 Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#7<br />
8 o<br />
56 o<br />
198<br />
54.5<br />
400<br />
#1<br />
9 o<br />
56 o<br />
198<br />
54.5<br />
400<br />
Ti model uses our unbreakable C-cup design.<br />
The newly designed <strong>Model</strong> <strong>RD</strong> Ti takes distance and forgiveness<br />
to a higher level! The new 450cc <strong>RD</strong> is unique because the design<br />
provides a truly deep face without an excessively oversized body-ideal<br />
for the modern golfer who wants supersize driver benefits without<br />
the huge size. The rounded head shape and patented alignment<br />
arrow build confidence in every swing. To ensure the <strong>Model</strong> <strong>RD</strong> is<br />
the best ti driver on the market, we use a milled, variable C-cup face<br />
construction with the highest grade (SP-700) titanium available (pro<br />
line companies use a lower grade!). The result: a soft, solid feel,<br />
unbreakable design and maximum COR-maximum distance! In<br />
addition, our highly successful copper-tungsten back weight system<br />
promotes stability and energy transfer down the target line. The<br />
<strong>Model</strong> <strong>RD</strong> Fairway woods also utilize our reduced drag sole design<br />
for unparalleled ease in hitting the ball from a tight lie or rough!<br />
#1<br />
10 o<br />
56 o<br />
198<br />
54.5<br />
400<br />
#1<br />
12 o<br />
56 o<br />
198<br />
54.5<br />
400<br />
#1<br />
15 o<br />
56 o<br />
198<br />
54.5<br />
400<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
all require an insert<br />
insert ring<br />
stock #HCIR2<br />
<strong>Trident</strong> <strong>Model</strong> <strong>RD</strong> Steel Woods<br />
stock #<strong>RD</strong>W<br />
RH only: 10 o , #3, #5, #7 and #9<br />
Specs for the <strong>RD</strong> steel woods<br />
club #1<br />
loft 10<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
55 o<br />
200<br />
42<br />
225<br />
#3<br />
15 o<br />
57 o<br />
208<br />
41<br />
215<br />
#5<br />
19 o<br />
58 o<br />
218<br />
40<br />
205<br />
#7<br />
22 o<br />
58 o<br />
222<br />
39<br />
190<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
1-2 degree closed face (#1 only)<br />
right hand only<br />
insert ferrule<br />
stock #INSFW<br />
#9<br />
25 o<br />
58.5 o<br />
228<br />
38<br />
170
ob72 1/26/05 11:07 AM Page 7<br />
<strong>Trident</strong> HP+ Hybrid <strong>Irons</strong><br />
stock #HPI<br />
RH only: 3-PW, AW, SW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 82mm<br />
blade height #5: 53mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
59 o<br />
242<br />
4.0<br />
#4<br />
25 o<br />
59 o<br />
249<br />
4.0<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 34mm<br />
topline width: 6mm<br />
#5<br />
28 o<br />
60 o<br />
256<br />
3.5<br />
#6<br />
30 o<br />
61 o<br />
262<br />
3.0<br />
#7<br />
34 o<br />
62 o<br />
269<br />
2.5<br />
#8<br />
37 o<br />
63 o<br />
276<br />
2.0<br />
#9<br />
41 o<br />
64 o<br />
283<br />
1.5<br />
PW<br />
45 o<br />
64 o<br />
291<br />
1.5<br />
6 o<br />
AW<br />
49 o<br />
64 o<br />
298<br />
1.0<br />
5 o<br />
SW<br />
53 o<br />
64 o<br />
298<br />
1.0<br />
8 o<br />
LW<br />
58 o<br />
64 o<br />
298<br />
1.0<br />
6 o<br />
The new HP+ Hybrid <strong>Irons</strong> are designed to improve performance<br />
and build confidence for the mid to upper handicapper.<br />
With extreme perimeter weighting, plus a very low rearward<br />
center of gravity, the HP+ truly presents the average golfer with<br />
the opportunity to reach new levels in game improvement! The<br />
extreme weighting is achieved by making the face super thin and<br />
responsive, and by using minimal weight at the top with a thin,<br />
straight topline. In addition, the cavity is considerably deeper<br />
than normal which helps move the center of gravity lower and<br />
rearward. This weighting design rewards all types of golf swings<br />
with straighter, higher shots combined with an amazingly solid<br />
feel. Add in progressive offsets, progressive sole width, a nondrag<br />
tour grind sole and you have the ultimate in a hybrid game<br />
improvement club!<br />
Very Wide Sole<br />
beveled trailing edge for<br />
hybrid performance.<br />
. very easy to hit long irons.<br />
. ideal for BOTH men and women.<br />
. truly the ultimate game improvement club!<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
chrome finish<br />
RH only<br />
[ 7 ]
ob72 1/26/05 11:07 AM Page 8<br />
<strong>Trident</strong> SS 410 Titanium<br />
stock #TI410<br />
410cc RH only: 8 o ,9 o ,10 o ,12 o<br />
Requires our patented hosel collar insert system.<br />
New 410cc size<br />
[ 8 ]<br />
Patent Pending Design<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Specs for the SS 410 Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 103/105mm<br />
SP-700 Ti (C-cup face)<br />
#1<br />
8 o<br />
56 o<br />
198<br />
56<br />
410<br />
#1<br />
9 o<br />
56 o<br />
198<br />
56<br />
410<br />
#1<br />
10 o<br />
56 o<br />
198<br />
56<br />
410<br />
#1<br />
12 o<br />
56 o<br />
198<br />
56<br />
410<br />
both models require an insert<br />
insert ring<br />
stock #HCIR2<br />
insert ferrule<br />
stock #INSFW<br />
The new <strong>Trident</strong> SS Ti 410cc is the next advancement in our line of<br />
superior Ti drivers. A new, revolutionary, ultralight Ti crown (lighter<br />
and stronger than composite crowns such as the ERC Fusion tm ) has<br />
enabled us to design our best selling SS Ti in a larger 410cc version.<br />
The new ultralite crown feature allows us to move more weight to<br />
areas of the club that enhance performance. Our patent pending<br />
screw weight system decreases both sidespin and backspin-giving<br />
longer carry and accuracy. In addition, the weights can be adjusted for<br />
lighter or heavier head weight to compensate for shaft length and<br />
weight or to add/decrease draw bias. Our larger maximum COR face<br />
and our unbreakable C-cup tm design promote maximum rebound of<br />
the ball. This driver was recently used in the USGA Senior Amateur<br />
Tournament and Champions Tour.<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
<strong>Trident</strong> SS 360 Titanium<br />
stock #TI360<br />
360cc RH: 7 o ,8 o ,9 o ,10 o ,12 o , and 15 o<br />
360cc LH: 9 o ,10 o , and 12 o<br />
Specs for the SS 360 Ti drivers<br />
club #1<br />
loft 7<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
55 o<br />
198<br />
55<br />
360<br />
#1<br />
8 o<br />
55 o<br />
198<br />
55<br />
360<br />
#1<br />
9 o<br />
55 o<br />
198<br />
55<br />
360<br />
#1<br />
10 o<br />
55 o<br />
198<br />
55<br />
360<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
2 degree closed face<br />
360 RH/LH; 410 RH only<br />
#1<br />
12 o<br />
55 o<br />
198<br />
55<br />
360<br />
#1<br />
15 o<br />
55 o<br />
198<br />
55<br />
360
ob72 1/26/05 11:16 AM Page 9<br />
<strong>Trident</strong> SS Steel Plus<br />
stock #TSSW<br />
RH: 8 o ,9 o ,10 o ,12 o , #3, #5, #7, #9 and #11<br />
LH: 9 o ,10 o ,#3, #5, #7, #9<br />
Requires our patented hosel collar insert system.<br />
. medium trajectory.<br />
. back weight adds forgiveness.<br />
. fairway woods match SS Ti models.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 82mm<br />
450ss steel<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
55 o<br />
200<br />
42<br />
230<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 31mm<br />
bottom of hosel to heel: 26mm<br />
#1<br />
9 o<br />
55 o<br />
200<br />
42<br />
230<br />
#1<br />
10 o<br />
55 o<br />
200<br />
42<br />
230<br />
#1<br />
12 o<br />
56 o<br />
204<br />
41<br />
230<br />
#3<br />
15 o<br />
57 o<br />
210<br />
37<br />
200<br />
#5<br />
19 o<br />
57.5 o<br />
218<br />
35<br />
195<br />
#7<br />
22 o<br />
58 o<br />
222<br />
34<br />
180<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
square face angles<br />
RH/LH<br />
#9<br />
25 o<br />
58 o<br />
226<br />
34<br />
165<br />
#11<br />
28 o<br />
59 o<br />
232<br />
33<br />
150<br />
The <strong>Trident</strong> SS Woods are made with a new ss<br />
alloy that is not only significantly harder than<br />
17-4, but also more elastic in nature. Using<br />
this material, we were able to design a face<br />
structure that has a maximum 3.2mm thickness<br />
at the center of the face then becoming progressively<br />
thinner (2.6mm) around the perimeter.<br />
This creates enhanced energy transfer to<br />
the ball through increased face deflection (ie.<br />
the rebound effect), creating optimal distance<br />
and trajectory in each driver and fairway wood.<br />
This design advancement is key to improving<br />
game performance for golfers of all skill levels.<br />
In addition, the Steel Plus heads are made with<br />
square face angles and a tungsten rear sole<br />
weight for an ease of playability that all golfers<br />
appreciate! Many customers have told us that<br />
this is the longest hitting steel head that they<br />
have ever used!!<br />
requires an insert<br />
insert ring<br />
stock #HCIR2<br />
insert ferrule<br />
stock #INSFW<br />
[ 9 ]
ob72 1/26/05 11:26 AM Page 10<br />
<strong>Trident</strong> FG Titanium 460cc/420cc<br />
460 stock #460FGTI (RH only: 8 o ,9 o ,10 o and 12 o )<br />
420 stock #FGTI (RH: 8 o ,9 o ,10 o and 12 o )<br />
Requires our patented hosel collar insert system.<br />
New 460cc for 2005<br />
Graphite fused into<br />
the top of the head is<br />
instrumental in redistributing<br />
the weight.<br />
[ 10 ]<br />
Recommended<br />
Shafts (.335):<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
The <strong>Trident</strong> F-G Ti represents a breakthrough<br />
in technology. A very light weight graphite<br />
crown attached to a titanium body allows<br />
more internal weight to be positioned back<br />
and low for optimal trajectory and reduced<br />
backspin. Combined with a maximum COR<br />
milled, layered design precision Ti face, the F-<br />
G Ti guarantees maximum distance. The new<br />
V-plate sole design adds dynamic stability so<br />
(off-center) all shots have increased accuracy.<br />
The F-G Ti is the best feeling, most accurate<br />
graphite Ti on the market!<br />
Specs for the FG 460cc Ti driver<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
Requires Our Patented Insert System<br />
.335 Insert<br />
stock #HCIR2<br />
(for a limited time, 420cc available in your choice of .335 or .350 hosel bore) 440cc is .350 bore only.<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.335 or .350 hosel bore<br />
heel/toe #1: 98mm/110mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 41<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
#1<br />
8 o<br />
57 o<br />
199<br />
58<br />
460<br />
#1<br />
9 o<br />
57 o<br />
199<br />
58<br />
460<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
requires insert hcir2 or hcir3<br />
1-2 degree closed face<br />
rh/lh<br />
#1<br />
10 o<br />
57 o<br />
199<br />
58<br />
460<br />
#1<br />
12 o<br />
57 o<br />
199<br />
58<br />
460<br />
420cc Available until sold out.<br />
FREE headcover with<br />
purchase of FG Ti head!<br />
.350 Insert<br />
stock #HCIR3
ob72 1/27/05 10:20 AM Page 11<br />
<strong>Trident</strong> <strong>Model</strong> 530 Titanium<br />
stock #530TI<br />
RH: 8 o ,9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
.350 hosel bore<br />
Exclusive<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.350 hosel bore<br />
heel/toe #1: 114mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 42<br />
hosel depth: 33mm<br />
bottom of hosel to heel: 36mm<br />
Specs for the 530cc driver<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
55 o<br />
198<br />
66<br />
530<br />
#1<br />
9 o<br />
55 o<br />
198<br />
66<br />
530<br />
#1<br />
10 o<br />
55 o<br />
198<br />
66<br />
530<br />
The 530cc is possibly the biggest and longest hitting<br />
Ti driver ever! Since the 530cc is now larger than the<br />
USGA allows for tournament play, we decided to<br />
make the COR higher than the permitted .830. Using<br />
our C-cup design, we made a very thin, layered variable<br />
face with a COR rating of .848! More rebound<br />
than any other driver now available!! Plus, our C-cup<br />
design greatly increases consistency on off-center hits,<br />
both in performance and accuracy. And it’s unbreakable!<br />
Of course, distance depends on more than high<br />
COR. You must get a proper launch angle, spin rate,<br />
etc. So, loft and shaft are important. But, for non-tournament<br />
golfers who want to hit it out there with the<br />
Big Boys, the 530cc is the driver for you!!<br />
FREE headcover with the purchase of a<br />
530cc head!<br />
Requires Our Patented Insert System<br />
.350 Insert<br />
stock #HCIR3<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
requires insert hcir3<br />
1-2 degree closed face<br />
RH only<br />
#1<br />
12 o<br />
55 o<br />
198<br />
66<br />
530<br />
. new thin face exceeds USGA max COR limit.<br />
. unbreakable C-Cup face design.<br />
. unbelievable distance.<br />
Also available in Deep Red finish<br />
stock# 530DR<br />
[ 11 ]
ob72 1/27/05 10:20 AM Page 12<br />
<strong>Trident</strong> 460 VTT<br />
stock #460VTI<br />
RH: 8 o ,9 o ,10 o ,12 o and 15 o<br />
LH: 9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
[ 12 ]<br />
.350 hosel bore<br />
Exclusive<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.350 hosel bore<br />
heel/toe #1: 103mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 46<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 32mm<br />
Specs for the 460 VTT driver<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
56 o<br />
200<br />
56<br />
460<br />
#1<br />
9 o<br />
56 o<br />
200<br />
56<br />
460<br />
#1<br />
10 o<br />
56 o<br />
200<br />
56<br />
460<br />
Our 460 VTT is made with our C-cup<br />
design to ensure maximum COR with<br />
the most consistent shot pattern-even<br />
for off-center hits-of any legal driver!<br />
Off-center forgiveness is enhanced<br />
with an expanded, legal head volume<br />
of 460cc. The really large and deep Ccup<br />
face guarantees you will powder<br />
the ball out there a long, long way!<br />
The neutral weighting contributes to a<br />
boring trajectory with very little backspin<br />
for even more distance. The 460<br />
VTT is really a terrific distance head<br />
from <strong>Trident</strong> Golf.<br />
FREE headcover with the purchase of a<br />
460 VTT head!<br />
Requires Our Patented Insert System<br />
.350 Insert<br />
stock #HCIR3<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
requires insert hcir3<br />
1-2 degree closed face<br />
RH/LH<br />
#1<br />
12 o<br />
56 o<br />
200<br />
56<br />
460<br />
#1<br />
15 o<br />
56 o<br />
200<br />
56<br />
460<br />
. used at the USGA Senior Amateur!<br />
. used at PGA Champions Tour events!<br />
. unbreakable C-Cup face design.
ob72 1/26/05 11:36 AM Page 13<br />
<strong>Trident</strong> VTT Steel<br />
stock #VTTW<br />
RH only: 9 o ,10 o ,12 o , #3, #5, #7 and #9<br />
Requires our patented hosel collar insert system.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 86mm<br />
450ss steel<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 44<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 28mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
9 o<br />
55 o<br />
200<br />
44<br />
230<br />
#1<br />
10 o<br />
55 o<br />
200<br />
44<br />
230<br />
#1<br />
12 o<br />
55 o<br />
200<br />
44<br />
230<br />
#3<br />
15 o<br />
56 o<br />
208<br />
40<br />
215<br />
#5<br />
19 o<br />
57 o<br />
218<br />
38<br />
205<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
#7<br />
23 o<br />
58 o<br />
225<br />
36<br />
190<br />
requires insert hcir2 or insfw<br />
square face angles<br />
RH only<br />
#9<br />
27 o<br />
58 o<br />
230<br />
35<br />
180<br />
The oversized VTT metal woods are a<br />
perfect compliment to the VTT Ti driver.<br />
These woods are made with a 450st alloy<br />
that allows us to make a thinner variable<br />
face for increased distance. The deep hosel<br />
design adds stability and consistency for<br />
greater accuracy to all shots. The sole<br />
design of the VTT woods helps the head<br />
to slide along the turf instead of digging<br />
in, which really makes the fairway woods<br />
easy to hit solidly. We think the VTT<br />
woods are better performing than expensive<br />
pro line heads.<br />
. medium high trajectory.<br />
. great match with our VTT Ti.<br />
. oversized for forgiveness.<br />
requires an insert<br />
insert ring<br />
stock #HCIR2<br />
insert ferrule<br />
stock #INSFW<br />
[ 13 ]
ob72 1/26/05 11:36 AM Page 14<br />
Elite Plus <strong>Irons</strong><br />
stock #ELPI<br />
RH only: 3-PW, SW, AW and LW<br />
Requires our patented hosel collar insert system.<br />
Can be bent up to 2 o for loft or lie.<br />
. low center of gravity creates optimum trajectory.<br />
. easy to hit long irons, accurate short irons.<br />
. progressive offsets.<br />
. extreme rearward weight design increases performance.<br />
Sold in sets: 3-PW or 5-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
[ 14 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 83mm<br />
blade height #5: 56mm<br />
431 stainless<br />
This head requires an insert.<br />
insert ring<br />
stock #hciri<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
insert ferrule<br />
stock #insfi<br />
#3<br />
22 o<br />
59 o<br />
244<br />
3.5<br />
#4<br />
25 o<br />
60 o<br />
251<br />
3.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 25mm<br />
hosel depth: 30mm<br />
topline width: 9mm<br />
#5<br />
27 o<br />
61 o<br />
258<br />
3.0<br />
#6<br />
30 o<br />
62 o<br />
265<br />
2.5<br />
#7<br />
33 o<br />
63 o<br />
272<br />
2.0<br />
#8<br />
36 o<br />
64 o<br />
279<br />
1.5<br />
#9<br />
40 o<br />
64 o<br />
286<br />
1.0<br />
The deep cavity<br />
increases stability.<br />
PW<br />
44 o<br />
64 o<br />
293<br />
1.0<br />
5 o<br />
AW<br />
59 o<br />
64 o<br />
300<br />
1.0<br />
6 o<br />
Wide sole promotes<br />
hybrid type performance.<br />
SW<br />
54 o<br />
64 o<br />
300<br />
1.0<br />
8 o<br />
LW<br />
58 o<br />
64 o<br />
300<br />
1.0<br />
6 o<br />
Although similar to other pro line designs on the market, the<br />
Elite Plus irons are better than any other competitor’s product<br />
because we engineered it to be better. While cosmetics<br />
are all most companies care about, our primary goal is PER-<br />
FORMANCE! And these irons have many specific performance<br />
features such as: a variable face, a contoured (tour grind)<br />
sole, small progressive offsets that allow better target alignment,<br />
plus the undercut cavity is designed to move more<br />
weight back away from the clubface to promote better trajectory,<br />
feel and performance. Superior engineering guarantees<br />
the Elite Plus will have superior performance. Cosmetics are<br />
important, but performance and results are the goal.<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 13mm<br />
modified square grooves<br />
bright satin finish<br />
right hand only
ob72 1/26/05 11:36 AM Page 15<br />
<strong>Trident</strong> Injector II <strong>Irons</strong><br />
stock #INJ2I<br />
RH/LH: 3-PW, SW, AW and LW<br />
can be bent up to 2 degrees for loft/lie<br />
<strong>Trident</strong> VTT Players <strong>Irons</strong><br />
stock #VTTI<br />
RH: 3-PW, SW, AW and LW<br />
can be bent up to 2 degrees for loft/lie<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, SW, AW, LW<br />
. RH/LH available.<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
59 o<br />
244<br />
5.5<br />
#4<br />
25 o<br />
60 o<br />
251<br />
5.0<br />
#5<br />
28 o<br />
61 o<br />
258<br />
4.5<br />
#6<br />
31 o<br />
62 o<br />
265<br />
4.0<br />
#7<br />
34 o<br />
63 o<br />
272<br />
3.5<br />
The Injector II irons are the result of an intense effort to design and engineer<br />
an innovative and attractive game improvement golf club. And no<br />
question, we have succeeded in doing that with the Injector II.<br />
A) If a vote were held today for the best looking, most attractive iron head,<br />
no doubt this would easily win-no contest! B) The Injector II irons are<br />
loaded with game improvement features for the high and low handicap<br />
player alike. Among these features are: progressive offsets and specific club<br />
lofts which together insure increased accuracy and performance. The deep<br />
undercut cavity is designed to locate more mass behind the ball and lower<br />
the CG for easy to hit long irons. The contoured wider sole gives less turf<br />
“dig” and more solid contact shot after shot. The rounded non-glare<br />
topline lets the player focus on alignment. Without a doubt, you will be<br />
amazed when you see and play these terrific irons!<br />
This head requires an insert.<br />
insert ring<br />
stock #hciri<br />
#8<br />
37 o<br />
64 o<br />
279<br />
3.0<br />
#9<br />
41 o<br />
64 o<br />
286<br />
2.5<br />
PW<br />
45 o<br />
64 o<br />
293<br />
2.0<br />
4 o<br />
insert ferrule<br />
stock #insfi<br />
AW<br />
50 o<br />
65 o<br />
300<br />
2.0<br />
6 o<br />
SW<br />
54 o<br />
65 o<br />
300<br />
2.0<br />
8 o<br />
Sold in sets: 3-PW or 5-PW (rh only)<br />
individual pieces: #5, #7, PW, SW, AW, LW<br />
LW<br />
60 o<br />
65 o<br />
300<br />
2.0<br />
4 o<br />
.370” parallel bore #5 blade length: 85mm #5 blade height: 57mm<br />
431 stainless Hardness rating: 22 Bottom of hosel to heel: 20mm<br />
Hosel depth: 32mm Topline width: 5mm Hosel O.D.: 13mm<br />
Modified square grooves Chrome finish<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
59 o<br />
243<br />
2.0<br />
#4<br />
25 o<br />
59 o<br />
253<br />
2.0<br />
#5<br />
28 o<br />
61 o<br />
260<br />
2.0<br />
#6<br />
30 o<br />
62 o<br />
264<br />
1.5<br />
#7<br />
33 o<br />
63 o<br />
271<br />
1.5<br />
Although the VTT irons are serious clubs for serious players, golfers of all skill<br />
levels will appreciate the playability of these high performance irons. Features<br />
such as: a compact blade, minimal offsets and square blade alignment, precisely<br />
located vibration dampening for a soft feel and solid sound, maximum perimeter<br />
weighting with a lower CG in the long irons for easy playability and higher trajectory.<br />
Plus, the VTT iron design has a thin rounded topline and a rounded,<br />
classic shaped silhouette. So, if you are serious about improving your game, then<br />
really consider the VTT irons. They really are outstanding performance heads!<br />
. compact head design.<br />
. minimum offsets.<br />
This head requires an insert.<br />
insert ring<br />
stock #hciri<br />
#8<br />
36 o<br />
64 o<br />
278<br />
1.0<br />
#9<br />
40 o<br />
64 o<br />
285<br />
0.5<br />
PW<br />
44 o<br />
64 o<br />
292<br />
0.5<br />
3 o<br />
insert ferrule<br />
stock #insfi<br />
AW<br />
49 o<br />
65 o<br />
294<br />
0.5<br />
3 o<br />
SW<br />
53 o<br />
65 o<br />
298<br />
0.5<br />
7 o<br />
LW<br />
58 o<br />
65 o<br />
298<br />
0.5<br />
6 o<br />
.370” parallel bore #5 blade length: 78mm #5 blade height: 53mm<br />
431 stainless Hardness rating: 22 Bottom of hosel to heel: 28mm<br />
Hosel depth: 32mm Topline width: 4mm Hosel O.D.: 13mm<br />
Modified square grooves Chrome finish<br />
[ 15 ]
ob72 1/26/05 11:36 AM Page 16<br />
<strong>Trident</strong> Widebody Re-design<br />
stock #TWBR<br />
RH: 9.5 o<br />
, 10.5 o<br />
,13 o<br />
, #3, #5, #7, #9, #11<br />
LH: 9.5 o<br />
, 10.5 o<br />
, #3, #5, and #7<br />
.335” hosel bore.<br />
heel to toe driver: 86mm.<br />
Material: 17-4 stainless.<br />
Hardness rating: 29.<br />
Bottom of hosel to heel: 27mm.<br />
Hosel depth: 36mm.<br />
1 o closed face angles.<br />
<strong>Trident</strong> Widebody IV<br />
stock #WB4<br />
RH: 10 o ,12 o , #3, #5, #7, #9, #11<br />
LH: 10 o , #3, #5, #7, #9, #11<br />
. smaller head ideal for ladies.<br />
.335” hosel bore.<br />
heel to toe driver: 84mm.<br />
Material: 17-4 steel.<br />
Hardness rating: 29.<br />
Bottom of hosel to heel: 27mm<br />
Hosel depth: 35mm.<br />
Square face angles.<br />
[ 16 ]<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
9.5 o<br />
54 o<br />
203<br />
43<br />
220<br />
<strong>Trident</strong> Golf proudly offers the Widebody Redesign.<br />
This updated design has a concave center<br />
ridge V-sole to eliminate turf drag, a deeper face<br />
for a bigger sweet spot, and a reworked interior<br />
face support design for added head rigidity and<br />
stability during impact. This results in increased<br />
distance, feel and accuracy. The fairway woods are<br />
particularly easy to hit out of a multitude of lies.<br />
The unique sole design allows the club to slide<br />
through the rough more easily, allowing better,<br />
more consistent contact.<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
10.5 o<br />
54 o<br />
203<br />
43<br />
220<br />
requires an insert<br />
insert ring<br />
stock #HCIR2<br />
#1<br />
10 o<br />
54 o<br />
202<br />
42<br />
200<br />
#1<br />
13 o<br />
54 o<br />
203<br />
43<br />
220<br />
#1<br />
12 o<br />
54 o<br />
202<br />
42<br />
200<br />
requires an insert<br />
insert ring<br />
stock #HCIR2<br />
#3<br />
15 o<br />
55 o<br />
212<br />
42<br />
210<br />
#3<br />
15 o<br />
55 o<br />
208<br />
40<br />
190<br />
#5<br />
21 o<br />
56 o<br />
220<br />
42<br />
195<br />
#5<br />
19 o<br />
56 o<br />
216<br />
37<br />
180<br />
#7<br />
24 o<br />
57 o<br />
228<br />
41<br />
180<br />
#9<br />
27 o<br />
57 o<br />
230<br />
37<br />
170<br />
#11<br />
30 o<br />
57 o<br />
234<br />
36<br />
170<br />
insert ferrule<br />
stock #INSFW<br />
#7<br />
23 o<br />
56 o<br />
224<br />
35<br />
170<br />
#9<br />
28 o<br />
57 o<br />
230<br />
34<br />
160<br />
#11<br />
32 o<br />
58 o<br />
235<br />
34<br />
150<br />
The Widebody IV is a unique design cast<br />
with a super strong solid face onto a lower<br />
body of differing metal thickness and an<br />
extended convex sole. This allows a greater<br />
amount of weight in the bottom portion of<br />
the clubhead and a lower center of gravity.<br />
These features combined with a larger<br />
effective hitting area create a very forgiving<br />
metal wood that will get the ball airborne<br />
with less effort and a better feel. The<br />
Tomahawk Sole is convex and slides across<br />
the turf better easier.<br />
insert ferrule<br />
stock #INSFW
ob72 1/26/05 11:47 AM Page 17<br />
<strong>Trident</strong> Widebody II Deep Face Steel<br />
stock #WB2DF<br />
RH only: 9.5 o , 10.5 o , #3, #5 and #7<br />
Requires our patented hosel collar insert system.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 89mm<br />
17-4 stainless<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 29<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 26mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
insert ring<br />
stock #HCIR2<br />
#1<br />
9.5 o<br />
54 o<br />
200<br />
45<br />
240<br />
#1<br />
10.5 o<br />
54 o<br />
200<br />
45<br />
240<br />
#3<br />
15 o<br />
55 o<br />
210<br />
44<br />
220<br />
#5<br />
21 o<br />
56 o<br />
218<br />
42<br />
200<br />
#7<br />
24 o<br />
57 o<br />
228<br />
41<br />
190<br />
The <strong>Trident</strong> Widebody II Deep Face is made<br />
with a revolutionary “muscle back” sole design that<br />
optimizes weight behind the hitting face and puts<br />
more power into the hitting area. This model is<br />
made with a deep face and higher center of gravity<br />
which promotes more of a driving trajectory. In<br />
addition, the face score lines are designed to help<br />
maximize overspin for more ball roll. The contoured<br />
“muscle back” sole and flat central ridge<br />
minimize drag for optimum club head speed and<br />
very easy to hit fairway woods.<br />
. absolute minimum turf drag.<br />
requires an insert<br />
insert ferrule<br />
stock #INSFW<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
square face angles<br />
RH only<br />
[ 17 ]
ob72 1/26/05 11:48 AM Page 18<br />
Accura AG <strong>Irons</strong><br />
stock #AAGI<br />
RH only: 3-PW, AW, SW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 18 ]<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 81mm<br />
blade height #5: 50mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
58 o<br />
244<br />
2.5<br />
#4<br />
25 o<br />
59 o<br />
251<br />
2.0<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 36mm<br />
topline width: 5mm<br />
#5<br />
28 o<br />
60 o<br />
258<br />
2.0<br />
#6<br />
31 o<br />
61 o<br />
265<br />
1.5<br />
#7<br />
34 o<br />
62 o<br />
272<br />
1.5<br />
#8<br />
37 o<br />
63 o<br />
279<br />
1.0<br />
#9<br />
40 o<br />
64 o<br />
286<br />
1.0<br />
PW<br />
44 o<br />
64 o<br />
290<br />
0.5<br />
5 o<br />
AW<br />
48 o<br />
64 o<br />
295<br />
0.5<br />
6 o<br />
Perimeter Weighted Muscle Back<br />
SW<br />
53 o<br />
64 o<br />
295<br />
0.5<br />
8 o<br />
LW<br />
58 o<br />
64 o<br />
295<br />
0.5<br />
5 o<br />
The new Accura AG irons have the best of both worldsextreme<br />
perimeter weighting with an unusual muscle<br />
back insert in the middle of the cavity. This design<br />
maintains not only a maximum sweetspot and shot forgiveness,<br />
but also increased performance with more mass<br />
behind the ball at impact. Golf purists will not only<br />
appreciate the performance of the new Accura AG, but<br />
the classic design features such as: the thin topline,<br />
straight hosel with minimal offsets, tour grind sole and<br />
classic square blade alignment. The new Accura AG<br />
irons incorporate classic styling with modern technology<br />
for one of the most playable and accurate irons in golf.<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
chrome finish<br />
RH only
ob72 1/26/05 11:50 AM Page 19<br />
KB Tour Blade <strong>Irons</strong><br />
stock #KTRI<br />
RH: 3-PW, SW, AW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
. very easy to hit long irons!<br />
. soft solid feel.<br />
. minimal progressive offsets.<br />
. durable polished satin finish.<br />
. best performing blade style ever made!<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 80mm<br />
blade height #5: 53mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
58 o<br />
246<br />
2.5<br />
#4<br />
25 o<br />
59 o<br />
253<br />
2.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 21<br />
bottom of hosel to heel: 29mm<br />
hosel depth: 35mm<br />
topline width: 6mm<br />
#5<br />
28 o<br />
60 o<br />
260<br />
2.5<br />
#6<br />
31 o<br />
61 o<br />
267<br />
2.0<br />
#7<br />
34 o<br />
62 o<br />
274<br />
1.5<br />
#8<br />
37 o<br />
63 o<br />
281<br />
1.0<br />
#9<br />
40 o<br />
64 o<br />
288<br />
0.5<br />
PW<br />
45 o<br />
64 o<br />
295<br />
0.5<br />
5 o<br />
AW<br />
49 o<br />
64 o<br />
295<br />
0.5<br />
4 o<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
SW<br />
53 o<br />
64 o<br />
298<br />
0.5<br />
8 o<br />
LW<br />
58 o<br />
64 o<br />
300<br />
0.5<br />
6 o<br />
The most common complaints about a “blade” iron are<br />
that it is: hard to hit, has lots of vibration and terrible<br />
feel. The KB Tour Blade eliminates these problems!<br />
Across the back of the head, we’ve placed a precise area<br />
of polymeric isomer that totally eliminates vibration!<br />
The center of gravity has been moved closer to the sole<br />
and toward the face, making the long irons easier to hit<br />
with a higher trajectory than most cavity designs! The<br />
thin top line and square, straight blade make target<br />
alignment simple and accurate! Note: the KB Blade is a<br />
slightly oversize design for extra forgiveness.<br />
Guaranteed to be the best!<br />
Sold in sets: 3-PW or 5-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 15mm<br />
modified square grooves<br />
polished satin finish<br />
RH only<br />
[ 19 ]
ob72 1/26/05 11:54 AM Page 20<br />
KB XD <strong>Irons</strong><br />
stock #KBXDI<br />
RH: 3-PW and SW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 20 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Sold only in sets: 3-PW<br />
individual pieces: #5, #7 and SW<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 80mm<br />
blade height #5: 50mm<br />
431 stainless<br />
Wide sole on long<br />
irons creates hybrid<br />
forgiveness. <strong>Pro</strong>gressively<br />
thinner sole through the set for<br />
better shot making.<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
58 o<br />
248<br />
4.5<br />
#4<br />
25 o<br />
59 o<br />
255<br />
4.0<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 29mm<br />
hosel depth: 35mm<br />
topline width: 8mm<br />
#5<br />
28 o<br />
60 o<br />
262<br />
3.5<br />
#6<br />
31 o<br />
61 o<br />
269<br />
3.0<br />
#7<br />
34 o<br />
62 o<br />
276<br />
2.5<br />
#8<br />
37 o<br />
63 o<br />
283<br />
2.0<br />
#9<br />
42 o<br />
64 o<br />
290<br />
1.5<br />
PW<br />
46 o<br />
64 o<br />
296<br />
1.5<br />
6 o<br />
SW<br />
53 o<br />
64 o<br />
298<br />
1.5<br />
9 o<br />
The new KB XD irons are a real pleasure to play.<br />
Every iron in the set contributes to overall performance<br />
and enjoyment of the game. The revolutionary progressive<br />
sole width- the greatest width in the #3 ironmakes<br />
long irons perform like hybrid clubs (high, easy<br />
to hit soft shots), while the mid and short irons have a<br />
progressively deeper face for a larger hitting area. This<br />
promotes a more stable and consistent shot pattern.<br />
Hybrid iron designs are very popular. The new KB XD<br />
hybrids are among the very best.<br />
Deep cavity creates the<br />
look, feel and performance<br />
of a hybrid.<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 15mm<br />
modified square grooves<br />
satin finish<br />
RH only
ob72 1/26/05 11:56 AM Page 21<br />
KB XD Titanium<br />
stock #XDTI<br />
RH only: 9 o ,10 o ,12 o<br />
Requires our patented hosel collar insert system.<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Exclusive<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe Ti #1: 92mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 44<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 35mm<br />
Specs for the KB XD Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
9 o<br />
57 o<br />
200<br />
55<br />
435<br />
both models require an insert<br />
insert ring<br />
stock #HCIR2<br />
#1<br />
10 o<br />
57 o<br />
200<br />
55<br />
435<br />
#1<br />
12 o<br />
57 o<br />
200<br />
55<br />
435<br />
The new KB Ti combines a great classic look with<br />
a design that emphasizes playability. Game<br />
improvement features such as concentrated weight<br />
at optimal locations, unbreakable C-cup construction<br />
with a milled variable thin, hot face make the<br />
KB XD a great performer without the “frills” found<br />
on other ti drivers. In addition, the new KB XD ti<br />
features an extremely pleasing profile and a powerful<br />
sound and feel at impact. The KB XD is a perfect<br />
compliment to the new Hybrid KB XD irons.<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert<br />
2 degree closed face<br />
RH only<br />
insert ferrule<br />
stock #INSFW<br />
[ 21 ]
ob72 1/26/05 11:58 AM Page 22<br />
Heathway Titanium 400cc/450cc<br />
stock #HWTI/H450TI<br />
RH only: 8 o ,9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
[ 22 ]<br />
New 450cc ti!<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Ti drivers<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 98/101mm<br />
Beta Ti (drivers only)<br />
Specs for the HWTI<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
56 o<br />
198<br />
53<br />
400<br />
#1<br />
9 o<br />
56 o<br />
198<br />
53<br />
400<br />
#1<br />
10 o<br />
56 o<br />
198<br />
53<br />
400<br />
<strong>Pro</strong> <strong>Swing</strong> is proud to offer the Heathway ti driver and steel fairway<br />
woods. The ti driver is modeled after the latest pro-line<br />
brand-but with several added improvements that make this driver<br />
better performing at a fraction of their cost!! Check out these differences:<br />
1) Heathway’s exclusive plasma induced brass back<br />
weight actually will help you achieve a solid, accurate drive. 2) The<br />
Heathway Ti uses the patented <strong>Trident</strong> insert system to prevent<br />
shaft breakage. 3) The hosel progression has been changed so that<br />
the Heathway Ti face can be squared up and still allow for a slight<br />
draw effect. 4) The size of the head has been increased for maximum<br />
forgiveness and performance. 5) A special ti alloy has been<br />
used to achieve a very thin face for maximum COR.<br />
#1<br />
12 o<br />
56 o<br />
198<br />
53<br />
400<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
both models require an insert<br />
insert ring<br />
stock #HCIR2<br />
Heathway Steel Fairway Woods<br />
stock #HFW<br />
RH only:#3, #5 and #7<br />
Specs for the H450TI<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
56 o<br />
200<br />
56<br />
450<br />
#1<br />
9 o<br />
56 o<br />
200<br />
56<br />
450<br />
#1<br />
10 o<br />
56 o<br />
200<br />
56<br />
450<br />
#1<br />
12 o<br />
56 o<br />
200<br />
56<br />
450<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
1-2 degree closed face (#1 only)<br />
RH only<br />
insert ferrule<br />
stock #INSFW<br />
Specs for the steel woods<br />
club #3<br />
loft 15<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
56 o<br />
212<br />
44<br />
215<br />
#5<br />
19 o<br />
57 o<br />
218<br />
42<br />
200<br />
#7<br />
23 o<br />
58 o<br />
222<br />
40<br />
190
ob72 1/26/05 11:58 AM Page 23<br />
Heathway <strong>Irons</strong><br />
stock #HWI<br />
RH: 3-PW, SW, AW and LW<br />
LH: 3-PW and SW<br />
Requires our patented hosel collar insert system.<br />
Can be bent up to 2 o for loft or lie.<br />
. low center of gravity<br />
. high moment of inertia promotes forgiveness and distance.<br />
. perfect match with our other Heathway woods.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 86mm<br />
blade height #5: 54mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
21 o<br />
58 o<br />
242<br />
4.5<br />
#4<br />
24 o<br />
59 o<br />
249<br />
4.0<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 21<br />
bottom of hosel to heel: 27mm<br />
hosel depth: 36mm<br />
topline width: 8mm<br />
#5<br />
27 o<br />
60 o<br />
256<br />
3.5<br />
#6<br />
30 o<br />
61 o<br />
263<br />
3.0<br />
#7<br />
34 o<br />
62 o<br />
270<br />
2.5<br />
#8<br />
37 o<br />
63 o<br />
277<br />
2.0<br />
This head requires an insert.<br />
insert ring<br />
stock #hciri<br />
#9<br />
41 o<br />
64 o<br />
284<br />
1.5<br />
PW<br />
45 o<br />
64 o<br />
292<br />
1.0<br />
6 o<br />
AW<br />
49 o<br />
64 o<br />
294<br />
0.5<br />
4 o<br />
insert ferrule<br />
stock #insfi<br />
SW<br />
53 o<br />
64 o<br />
296<br />
0.5<br />
9 o<br />
LW<br />
58 o<br />
64 o<br />
296<br />
0.5<br />
7 o<br />
The awesome Heathway <strong>Pro</strong>fessional <strong>Irons</strong> are<br />
the next generation of easy to hit, high performance<br />
irons. A notched sole area moves more<br />
weight toward the toe and heel to increase forgiveness.<br />
An undercut cavity helps to move the<br />
weight away from the face to increase the moment<br />
of inertia and reduce twisting. The variable face<br />
increases performance even more! And for a finishing<br />
touch, the cavity badge matches the<br />
Heathway Ti driver finish for a really terrific looking<br />
set! Why pay more and get less for a pro-line<br />
brand that uses “off the shelf ” shafts and grips?<br />
deep inset cavity<br />
Sold in sets: 3-PW or 5-PW (rh only)<br />
individual pieces: #5, #7, AW, SW, LW<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
chrome finish<br />
RH/LH available<br />
[ 23 ]
ob72 1/26/05 11:58 AM Page 24<br />
Original Excell Thin Lie<br />
stock #EXTW<br />
RH only: 9.5 o , 10.5 o ,13 o , #3, #5, #7 and #9<br />
Must be countersunk for use with graphite shafts.<br />
[ 24 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 90mm<br />
17-4 steel<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 36<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 25mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
9.5 o<br />
54 o<br />
200<br />
40<br />
200<br />
Specs for the Thin Lie<br />
#1<br />
10.5 o<br />
54 o<br />
200<br />
40<br />
200<br />
#1<br />
13 o<br />
54 o<br />
206<br />
39<br />
200<br />
The original Thin Lie is a mid face metal wood<br />
designed to optimize your ability to control shots<br />
from both a tight lie or rough situation and off the<br />
tee! This unique design gives the Excell Thin Lie<br />
club a wider bottom and lowers the center of gravity<br />
below conventional woods. With a mid face and<br />
low CG, this design produces optimal trajectory,<br />
higher velocity shots and less sidespin than other<br />
clubs-from any type of lie. In fact, this club is much<br />
easier to hit from the rough, a divot, or a fairway<br />
bunker. Improve the critical 1st and 2nd shot scoring<br />
area of your game with the Excell metal wood.<br />
Requires a ferrule.<br />
We recommend 3/8” black<br />
stock #fmbs<br />
#3<br />
16 o<br />
55 o<br />
213<br />
39<br />
195<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires a ferrule<br />
square face angles<br />
RH only<br />
#5<br />
19 o<br />
56 o<br />
219<br />
36<br />
190<br />
#7<br />
23 o<br />
56 o<br />
222<br />
35<br />
180<br />
#9<br />
28 o<br />
57 o<br />
230<br />
33<br />
175
ob72 1/26/05 11:58 AM Page 25<br />
Excell Thin Lie II<br />
stock #TL2W<br />
RH only: 9 o ,10 o ,13 o , #3, #5, #7 and #9<br />
Must be countersunk for use with graphite shafts.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 92mm<br />
Niobium alloy steel<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 36<br />
hosel depth: 34mm<br />
bottom of hosel to heel: 25mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
Specs for the Thin Lie II<br />
#1<br />
9 o<br />
54 o<br />
198<br />
35<br />
195<br />
#1<br />
10 o<br />
54 o<br />
198<br />
35<br />
195<br />
#1<br />
13 o<br />
54 o<br />
206<br />
32<br />
195<br />
#3<br />
16 o<br />
55 o<br />
213<br />
32<br />
185<br />
#5<br />
19 o<br />
56 o<br />
219<br />
31<br />
180<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires a ferrule<br />
square face angles<br />
RH only<br />
#7<br />
23 o<br />
56 o<br />
222<br />
30<br />
175<br />
#9<br />
28 o<br />
57 o<br />
230<br />
30<br />
170<br />
The Thin Lie II Woods are great for shots from<br />
out of the deep rough or off of the tee. Designed<br />
with a slightly lower profile and with a unique<br />
rear sole weight insert, the TL-II head creates an<br />
optimal launch angle to get the ball airborne easier<br />
with a penetrating ball flight. Made with our<br />
new Niobium alloy of similar hardness to maraging<br />
steel, the ball rebounds off of the face much<br />
faster than normal 17-4ss.<br />
Requires a ferrule.<br />
We recommend 3/8” black<br />
stock #fmbs<br />
[ 25 ]
ob72 1/26/05 12:01 PM Page 26<br />
Crown Regal 5 <strong>Irons</strong><br />
stock #CR5I<br />
RH only: 3-PW, AW, SW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 26 ]<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
. classic silhouette builds confidence.<br />
. mass in the “muscle” part of cavity adds power and feel.<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 81mm<br />
blade height #5: 53mm<br />
431 stainless<br />
#3<br />
21 o<br />
59 o<br />
244<br />
4.0<br />
#4<br />
24 o<br />
60 o<br />
251<br />
3.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 36mm<br />
topline width: 8mm<br />
#5<br />
27 o<br />
61 o<br />
258<br />
3.0<br />
#6<br />
30 o<br />
62 o<br />
265<br />
2.5<br />
#7<br />
33 o<br />
63 o<br />
272<br />
2.0<br />
#8<br />
36 o<br />
63 o<br />
279<br />
1.5<br />
#9<br />
40 o<br />
64 o<br />
286<br />
1.0<br />
Muscle Cavity <strong>Irons</strong><br />
PW<br />
44 o<br />
64 o<br />
293<br />
1.0<br />
6 o<br />
AW<br />
48 o<br />
64 o<br />
295<br />
1.0<br />
5 o<br />
SW<br />
53 o<br />
64 o<br />
300<br />
1.0<br />
8 o<br />
LW<br />
58 o<br />
64 o<br />
300<br />
1.0<br />
6 o<br />
The new CR5 irons are designed to help all golfers enjoy the<br />
game more and are loaded with game improvement features<br />
such as the undercut cavity design that moves more weight to<br />
the perimeter for forgiving consistency. This also lowers the<br />
center of gravity making it easier to get the ball up in the air.<br />
Additional mass has been concentrated in the “muscle” portions<br />
of the cavity, right behind the ball at impact to give the<br />
club an extremely powerful and solid feel. To enhance game<br />
improvement, the CR5 irons feature progressive offsets,<br />
longer and higher face size for increased moment of inertia<br />
and thin topline for easy alignment.<br />
Cavity weight system<br />
promotes a deeper<br />
center of gravity.<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
satin finish<br />
RH only
ob72 1/26/05 12:01 PM Page 27<br />
Crown Regal 450 Hyper Steel Offset Woods<br />
stock #CRW<br />
RH only: 9 o ,10 o ,12 o , #3, #5, #7<br />
Must be countersunk for use with graphite shafts.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 90mm<br />
450ss steel<br />
Both models require a ferrule.<br />
we recommend:<br />
3/8” Black/Gold<br />
stock #FMBGWS<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 32mm<br />
bottom of hosel to heel: 29mm<br />
club #1<br />
loft 9<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
55 o<br />
200<br />
44<br />
250<br />
Specs for CRW/CR450W<br />
#1<br />
10 o<br />
55 o<br />
200<br />
44<br />
250<br />
#1<br />
12 o<br />
55 o<br />
202<br />
44<br />
250<br />
#3<br />
15 o<br />
56 o<br />
208<br />
40<br />
185<br />
#5<br />
18 o<br />
57 o<br />
214<br />
38<br />
170<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
#7<br />
21 o<br />
58 o<br />
222<br />
36<br />
155<br />
requires a ferrule<br />
Offset: 1 o closed/3mm offset<br />
Straight Hosel: square face angles<br />
RH only<br />
#9*<br />
25 o<br />
59 o<br />
228<br />
35<br />
150<br />
<strong>Pro</strong> <strong>Swing</strong> is proud to offer the Crown Regal Steel Offset<br />
Woods. This metal wood was designed to give maximum distance,<br />
but at the same time, fight slicing. This is achieved by<br />
incorporating an offset hosel (to keep hands ahead at impact)<br />
with a slightly closed face angle. The player with a slice will<br />
benefit greatly from this design. The offset hosel helps to<br />
yield longer, straighter shots by increasing the likelihood of a<br />
soft draw. To add distance, we’ve used a high tensile strength<br />
alloy to make a variable thickness face design for maximum<br />
ball rebound. In addition to performance, the Regal Steel<br />
Offset is an incredibly attractive head. The sole plate, for<br />
example, has a beautiful satin, pewter and chrome finish. Also<br />
available in a straight hosel version (shown below).<br />
Also available with same specs is a<br />
straight hosel version that matches the<br />
450cc Ti driver!<br />
CR450 Straight Hosel Steel<br />
stock #CR450W<br />
RH: 9 o ,10 o ,12 o , #3, #5, #7 and #9*<br />
[ 27 ]
ob72 1/26/05 12:01 PM Page 28<br />
Crown Regal 450cc Offset SS Titanium<br />
stock #ROTI<br />
RH only: 8 o ,9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
[ 28 ]<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
.350 hosel bore<br />
Exclusive<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.350 hosel bore<br />
heel/toe #1: 115mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 45<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
Specs for the ROTI<br />
#1<br />
8 o<br />
55 o<br />
198<br />
56<br />
450<br />
#1<br />
9 o<br />
55 o<br />
198<br />
56<br />
450<br />
<strong>Pro</strong> <strong>Swing</strong> is proud to offer the latest in a<br />
long line of successful Crown Regal<br />
products, the Regal 450 Offset Ti. This<br />
model incorporates the same design initiative<br />
as the straight hosel version. Our<br />
new design moves the shaft closer to the<br />
hitting area which dramatically improves<br />
stability, especially on off-center hits. The<br />
450cc head size, when coupled with the<br />
offset hosel, ensures that the Regal 450cc<br />
Offset Ti will eliminate slicing.<br />
Requires Our Patented Insert System<br />
.350 Insert<br />
stock #HCIR3<br />
#1<br />
10 o<br />
55 o<br />
198<br />
56<br />
450<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
#1<br />
12 o<br />
55 o<br />
198<br />
56<br />
450<br />
. largest Offset Ti on the market!!<br />
A 5mm offset, coupled with a closed<br />
face, will reduce slicing.<br />
requires insert hcir3<br />
3 degree closed face/5mm offset<br />
RH only
ob72 1/26/05 12:01 PM Page 29<br />
Crown Regal 450cc SS Titanium<br />
stock #RSSTI<br />
RH only: 8 o ,9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
.350 hosel bore<br />
Exclusive<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.350 hosel bore<br />
heel/toe #1: 115mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 45<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
Specs for the RSSTI<br />
#1<br />
8 o<br />
55 o<br />
198<br />
56<br />
450<br />
#1<br />
9 o<br />
55 o<br />
198<br />
56<br />
450<br />
#1<br />
10 o<br />
55 o<br />
198<br />
56<br />
450<br />
<strong>Pro</strong> <strong>Swing</strong> is proud to offer the latest in a<br />
long line of successful Crown Regal<br />
products, the Regal 450 Ti. This model<br />
incorporates a sole design that is engineered<br />
to provide the ultimate in stability<br />
especially on off-center hits. The raised<br />
center region of the sole adds mass both<br />
behind and away from the face. This<br />
enables the center of gravity to be optimized<br />
to provide a higher launch angle<br />
with less spin. The combination of high<br />
launch/less spin has been shown in<br />
robotic and tour testing to maximize<br />
overall performance. We’ve also added<br />
our thin C-cup face for maximum COR<br />
(CT) to increase distance. Hit it long, hit<br />
it straight with the Regal 450cc Ti.<br />
Requires Our Patented Insert System<br />
.350 Insert<br />
stock #HCIR3<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
requires insert hcir3<br />
1-2 degree closed face<br />
RH only<br />
#1<br />
12 o<br />
55 o<br />
198<br />
56<br />
450<br />
. tremendously long hitting driver!!<br />
[ 29 ]
ob72 1/26/05 12:05 PM Page 30<br />
Crown Regal IV Brass Back<br />
stock #CRBB<br />
RH only: 8 o ,9 o ,10 o ,12 o , #3, #5 and #7<br />
Must be countersunk for use with graphite shafts.<br />
[ 30 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 95mm<br />
niobium steel<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 42<br />
hosel depth: 33mm<br />
bottom of hosel to heel: 26mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
54 o<br />
200<br />
42<br />
220<br />
#1<br />
9 o<br />
54 o<br />
200<br />
42<br />
220<br />
#1<br />
10 o<br />
54 o<br />
200<br />
42<br />
220<br />
#1<br />
12 o<br />
54 o<br />
200<br />
42<br />
220<br />
#3<br />
14 o<br />
55 o<br />
210<br />
36<br />
210<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires a ferrule<br />
square face angles<br />
RH only<br />
#5<br />
18 o<br />
56 o<br />
218<br />
33<br />
200<br />
#7<br />
21 o<br />
57 o<br />
224<br />
31<br />
190<br />
The Crown Regal IV Brass Back Weight Woods<br />
move the center of gravity back away from the face<br />
to give the head better balance, a solid feel, and<br />
promote distance. But combined with our<br />
Niobium Steel head with a hardness rating of<br />
HRC 42 (normal 17-4 stainless steel is normally<br />
about HRC 30) the ball will rebound at a greater<br />
velocity with less spin, better accuracy, and more<br />
distance. The design of the Crown Regal IV Brass<br />
Back is very unique with the incorporation of<br />
“mini offsets”. Mini offset hosels have just enough<br />
offset to square the head at impact by a fade player,<br />
but small enough to prevent hooking by a draw<br />
player. Mini offsets promote a more solid contact<br />
with greater accuracy.<br />
. longest hitting steel wood ever made!<br />
This head requires a ferrule.<br />
we recommend:<br />
3/8” Black/Gold<br />
stock #FMBGWS
ob72 1/26/05 12:05 PM Page 31<br />
Crown Regal II <strong>Irons</strong><br />
stock #CR2I<br />
RH/LH: 1-PW, SW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 83mm<br />
blade height #5: 57mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#1<br />
16 o<br />
57 o<br />
230<br />
5.0<br />
#2<br />
18 o<br />
57 o<br />
237<br />
5.0<br />
#3<br />
20 o<br />
58 o<br />
244<br />
4.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 35mm<br />
topline width: 7mm<br />
#4<br />
23 o<br />
59 o<br />
251<br />
4.0<br />
#5<br />
27 o<br />
60 o<br />
258<br />
3.5<br />
#6<br />
30 o<br />
61 o<br />
265<br />
3.0<br />
#7<br />
34 o<br />
62 o<br />
272<br />
2.5<br />
#8<br />
37 o<br />
63 o<br />
280<br />
2.0<br />
#9<br />
41 o<br />
64 o<br />
287<br />
1.5<br />
PW<br />
45 o<br />
64 o<br />
294<br />
1.0<br />
4 o<br />
SW<br />
53 o<br />
64 o<br />
300<br />
1.0<br />
6 o<br />
The Crown Regal II irons have a cavity weighting system<br />
that is not only very appealing to look at, but centers<br />
weight directly behind the ball at impact. Thus,<br />
imparting greater energy and more distance to each<br />
shot. With slightly stronger lofts, there is no doubt<br />
these irons will add length to your game. We have also<br />
enhanced the consistency by designing progressive offsets<br />
into the irons. Other features include an updated<br />
ball alignment aid on the face, beautiful frosted cavity,<br />
and a bold, square topline. The Crown Regal II sets up<br />
square, plays great and looks terrific!<br />
Sold in sets: 3-PW or 5-PW (rh only)<br />
individual pieces: #1, #2, #5, #7, SW, LW<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black/Gold<br />
stock #FMBGI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 13.5mm<br />
modified square grooves<br />
chrome finish<br />
RH/LH<br />
LW<br />
58 o<br />
64 o<br />
300<br />
1.0<br />
5 o<br />
[ 31 ]
ob72 1/26/05 12:05 PM Page 32<br />
DDI CB <strong>Irons</strong><br />
stock #DCBI<br />
RH only: 3-PW and SW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 32 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 82mm<br />
blade height #5: 55mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 35mm<br />
topline width: 6mm<br />
#3<br />
22 o<br />
59 o<br />
240<br />
2.0<br />
#4<br />
25 o<br />
60 o<br />
247<br />
2.0<br />
#5<br />
28 o<br />
61 o<br />
254<br />
1.5<br />
#6<br />
31 o<br />
62 o<br />
261<br />
1.5<br />
#7<br />
34 o<br />
62 o<br />
268<br />
1.0<br />
#8<br />
37 o<br />
63 o<br />
275<br />
1.0<br />
#9<br />
40 o<br />
64 o<br />
282<br />
0.5<br />
PW<br />
44 o<br />
64 o<br />
290<br />
0.5<br />
SW<br />
52 o<br />
64 o<br />
298<br />
0.5<br />
The new DDi CB irons combine a traditional profile<br />
with modern perimeter weighting with a rearward<br />
muscle back feature. This low and rearward<br />
muscle back weight rewards the player with an iron<br />
that not only looks great at address, but makes it<br />
exceptionally easy to get iron shots airborne. The<br />
weight design of the new DDi CB gives it one of<br />
the lowest centers of gravity ever achieved in an iron<br />
head with a traditional profile. If you are looking for<br />
improvement and enjoyment in your game, the new<br />
DDi CB irons are your answer.<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, SW<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
satin finish<br />
RH only
ob72 1/26/05 12:05 PM Page 33<br />
DDI 450cc Titanium<br />
stock #DDI450<br />
RH only: 8 o ,9 o ,10 o ,12 o<br />
Requires our patented hosel collar insert system.<br />
Fairway woods must be countersunk for use with graphite shafts.<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Ti driver<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe Ti #1: 96mm<br />
SP-700 Ti (C-cup face)<br />
Specs for the DDi 450 Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
57 o<br />
204<br />
56<br />
450<br />
#1<br />
9 o<br />
57 o<br />
204<br />
56<br />
450<br />
#1<br />
10 o<br />
57 o<br />
204<br />
56<br />
450<br />
#1<br />
12 o<br />
57 o<br />
204<br />
56<br />
450<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 45<br />
hosel depth: 36mm<br />
bottom of hosel to heel: 37mm<br />
both models require an insert<br />
insert ring<br />
stock #HCIR2<br />
insert ferrule<br />
stock #INSFW<br />
The DDi Ti drivers have been one of the best and<br />
most popular game improvement clubs, but now we<br />
introduce an all new, high performance 450cc super<br />
game improvement Ti head. Bigger size means bigger<br />
sweetspot and more spring effect for longer distance.<br />
The new DDi is made with the very best<br />
SP-700 Ti and a maximum variable thickness face<br />
design. The resulting spring face is at the USGA<br />
legal limit. The head shape is rounded and gives<br />
the impression of a smaller head at address. And<br />
like the smaller DDi Ti models, this driver is very<br />
easy to hit with very accurate shots. The new 450cc<br />
DDi promises better than proline performance at a<br />
very economical price.<br />
DDI Steel Fairway<br />
stock #CDTW<br />
RH only: #3, #5, #7, #9<br />
Fairway woods require a ferrule.<br />
Specs for the steel woods<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#3<br />
15 o<br />
56 o<br />
210<br />
40<br />
210<br />
#5<br />
18 o<br />
57 o<br />
218<br />
39<br />
200<br />
#7<br />
22 o<br />
58 o<br />
226<br />
38<br />
190<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert<br />
2 degree closed face<br />
RH only<br />
#9<br />
27 o<br />
59 o<br />
230<br />
37<br />
180<br />
[ 33 ]
ob72 1/26/05 12:11 PM Page 34<br />
DDI E <strong>Model</strong> Titanium<br />
stock #DETI<br />
RH only: 8 o ,9 o ,10 o and 12 o<br />
The DDi E Ti driver has a slightly less rounded toe, and<br />
slightly less rounded sole plate. The E <strong>Model</strong> is designed<br />
to produce a more boring trajectory.<br />
Specs for the DDI E Ti drivers<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
[ 34 ]<br />
#1<br />
8 o<br />
55 o<br />
200<br />
54<br />
385<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
#1<br />
9 o<br />
55 o<br />
200<br />
54<br />
385<br />
#1<br />
10 o<br />
55 o<br />
200<br />
54<br />
385<br />
#1<br />
12 o<br />
55 o<br />
200<br />
54<br />
385<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 100mm<br />
Beta SF-Ti<br />
both models require an insert<br />
insert ring<br />
stock #HCIR2<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
insert ferrule<br />
stock #INSFW<br />
hardness: 41<br />
hosel depth: 37mm<br />
bottom of hosel to heel: 38mm<br />
DDI K <strong>Model</strong> Titanium<br />
stock #DKTI<br />
RH: 8 o ,9 o ,10 o ,12 o and 15 o<br />
The DDi K Ti driver has a slightly more squared toe at<br />
address, and slightly more rounded sole plate. The K <strong>Model</strong> is<br />
designed to produce a low spin/high trajectory shot pattern.<br />
Specs for the DDI K Ti drivers<br />
club #1<br />
loft 8<br />
lie<br />
weight<br />
face ht<br />
volume<br />
o<br />
55 o<br />
200<br />
55<br />
385<br />
#1<br />
9 o<br />
55 o<br />
200<br />
55<br />
385<br />
#1<br />
10 o<br />
55 o<br />
200<br />
55<br />
385<br />
#1<br />
12 o<br />
55 o<br />
200<br />
55<br />
385<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
1 degree closed face<br />
RH only<br />
#1<br />
15 o<br />
55 o<br />
200<br />
55<br />
385
ob72 1/26/05 12:11 PM Page 35<br />
DDI WF <strong>Irons</strong><br />
stock #DDWFI<br />
RH only: 3-PW, SW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, SW, LW<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 86mm<br />
blade height #5: 54mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
59 o<br />
243<br />
3.0<br />
#4<br />
25 o<br />
59 o<br />
250<br />
2.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 21<br />
bottom of hosel to heel: 27mm<br />
hosel depth: 36mm<br />
topline width: 8mm<br />
#5<br />
27 o<br />
60 o<br />
257<br />
2.0<br />
#6<br />
30 o<br />
61 o<br />
263<br />
2.0<br />
#7<br />
33 o<br />
62 o<br />
270<br />
1.5<br />
#8<br />
36 o<br />
63 o<br />
277<br />
1.0<br />
#9<br />
40 o<br />
64 o<br />
284<br />
1.0<br />
PW<br />
45 o<br />
64 o<br />
290<br />
0.5<br />
6 o<br />
SW<br />
53 o<br />
64 o<br />
296<br />
0.5<br />
9 o<br />
LW<br />
58 o<br />
64 o<br />
296<br />
0.5<br />
7 o<br />
The new WF irons feature a muscle/cavity design that offers<br />
the same setup and look of a traditional blade, but our new<br />
Weight Flow cavity drastically increases playability and forgiveness.<br />
Like a traditional blade, the WF irons have minimal<br />
offset, a straight leading edge, thin top line and overall classic<br />
blade shape. However, our new CAD designed cavity is anything<br />
but traditional. A precisely designed weight flow cavity<br />
moves weight progressively from the toe to heel and ensures<br />
unmatched playability. These new irons really are amazingly<br />
easy to hit with great trajectory and accuracy from 3 iron right<br />
through the wedges. If you like a traditional blade setup, but<br />
need extra playability, the new WF irons are for you!<br />
This head requires a ferrule.<br />
we recommend:<br />
5/8” Black<br />
stock #FMBI<br />
Weight has been moved<br />
back on long irons to help<br />
square the blade at impact.<br />
Weight has been moved<br />
toward the toe on the<br />
scoring irons to promote<br />
accuracy and feel.<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
chrome finish<br />
RH only<br />
[ 35 ]
ob72 1/26/05 12:11 PM Page 36<br />
X-Factor Hot Shot Titanium<br />
stock #HSTI<br />
RH only: 8 o ,9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
[ 36 ]<br />
New 460cc super size!<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
Exclusive<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
.335 hosel bore<br />
heel/toe #1: 98mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
hardness: 41<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
Specs for the Hotshot Ti<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
56 o<br />
198<br />
53<br />
460<br />
#1<br />
9 o<br />
56 o<br />
198<br />
53<br />
460<br />
#1<br />
10 o<br />
56 o<br />
198<br />
53<br />
460<br />
The goal in developing a hot Ti driver was to create<br />
an ultimate performance Ti head with<br />
increased dimensional stability and playability.<br />
The Hot Shot Ti is the result. Made with our<br />
unbreakable C-cup design and ultra thin variable<br />
face, the Hot Shot Ti pushed the new USGA<br />
“CT” (Characteristic Time) spring face test to the<br />
limit. Using new CAD design techniques to place<br />
head mass optimally as well as design bulge and<br />
roll to optimize spin rate and launch angle. This<br />
model has an extremely pleasing profile and a<br />
solid, powerful sound at impact.<br />
Requires an insert<br />
insert ring<br />
stock #HCIR2<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
requires insert hcir2 or insfw<br />
1 degree closed face<br />
RH only<br />
#1<br />
12 o<br />
56 o<br />
198<br />
53<br />
460<br />
insert ferrule<br />
stock #INSFW
ob72 1/26/05 12:11 PM Page 37<br />
Hot Shot <strong>Irons</strong><br />
stock #HOTI<br />
RH: 3-PW, SW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
. wide radiused sole prevents turf drag.<br />
. minimal progressive offsets.<br />
. soft solid feel.<br />
. very long hitting!<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 82mm<br />
blade height #5: 52mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
22 o<br />
59 o<br />
242<br />
3.5<br />
#4<br />
25 o<br />
60 o<br />
249<br />
3.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 29mm<br />
hosel depth: 35mm<br />
topline width: 9mm<br />
#5<br />
28 o<br />
60 o<br />
256<br />
3.0<br />
#6<br />
31 o<br />
61 o<br />
263<br />
2.5<br />
#7<br />
34 o<br />
62 o<br />
270<br />
2.0<br />
#8<br />
37 o<br />
63 o<br />
277<br />
1.5<br />
#9<br />
40 o<br />
64 o<br />
284<br />
1.0<br />
PW<br />
44 o<br />
64 o<br />
291<br />
1.0<br />
6 o<br />
SW<br />
53 o<br />
65 o<br />
298<br />
1.0<br />
10 o<br />
LW<br />
58 o<br />
65 o<br />
300<br />
1.0<br />
6 o<br />
The hollow Hot Shot irons represent a revolution in<br />
design. The center of gravity has been moved away<br />
from the face and lowered in the long irons for higher,<br />
easier to hit shots. The rear power bar design also<br />
enhances perimeter weighting and increases resistance<br />
to twisting. Plus, the power bar design allows mass to<br />
be positioned throughout the set for a higher trajectory<br />
in the long irons, medium trajectory in the mid-irons<br />
and more boring shots for the short irons-with<br />
increased backspin. Wide sole widths throughout the<br />
set prevent fat shots and turf drag.<br />
Sold in sets: 3-PW or 5-PW<br />
individual pieces: #5, #7, SW, LW<br />
This head requires a ferrule.<br />
we recommend:<br />
9/16” Blk/Gray/Silver<br />
stock #FBSGI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 15mm<br />
modified square grooves<br />
chrome finish<br />
RH only<br />
[ 37 ]
ob72 1/26/05 12:23 PM Page 38<br />
X-Factor <strong>Irons</strong><br />
stock #XFI<br />
RH only: 3-PW, SW, AW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 38 ]<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, SW, AW, LW<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
#3/4/5 have a full cavity as shown.<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 80mm<br />
blade height #5: 54mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
21 o<br />
58 o<br />
242<br />
3.5<br />
#4<br />
24 o<br />
59 o<br />
249<br />
3.0<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 36mm<br />
topline width: 5mm<br />
#5<br />
27 o<br />
60 o<br />
256<br />
2.5<br />
#6<br />
30 o<br />
61 o<br />
263<br />
2.0<br />
#7<br />
34 o<br />
62 o<br />
270<br />
1.5<br />
#8<br />
37 o<br />
63 o<br />
277<br />
1.0<br />
#9<br />
41 o<br />
64 o<br />
284<br />
0.5<br />
PW<br />
45 o<br />
64 o<br />
290<br />
0.5<br />
6 o<br />
AW<br />
49 o<br />
64 o<br />
294<br />
0.5<br />
7 o<br />
SW<br />
53 o<br />
64 o<br />
294<br />
0.5<br />
9 o<br />
LW<br />
58 o<br />
64 o<br />
294<br />
0.5<br />
7 o<br />
Utilizing a shot-by-shot approach to club making, we have developed<br />
the X-Factor combo irons. These irons use multiple cavity<br />
weight design for one ideal set. The long irons (#3/4/5) feature a<br />
deep cavity back for more forgiveness and a lower center of gravity<br />
promoting an increase in trajectory. The middle irons (#6/7/8) feature<br />
a progressive muscle-back cavity for versatile shot making and<br />
increased ball spin. Lastly, the short irons (#9/wedges) rely on a<br />
blade design that will work the ball closer to the pin and give maximum<br />
ball spin. The X-Factor irons also utilize our exclusive “same<br />
size design” with the #3 iron the same size as the PW. This is very<br />
important with a combo set like the X-Factor irons!! Otherwise,<br />
when you stand over the ball, the #3 iron would look different<br />
than the #6 iron which will look different than the PW. Same size<br />
design will make all the irons set up the same as one set, while taking<br />
advantage of the combo design.<br />
This head requires a ferrule.<br />
we recommend:<br />
9/16” Silver/Black<br />
stock #FBSGI<br />
#6/7/8 have a muscle<br />
cavity as shown.<br />
#9/wedges are a blade<br />
design as shown.<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
chrome finish<br />
RH only
ob72 1/26/05 12:23 PM Page 39<br />
X-Factor Titanium<br />
stock #XFTI<br />
RH only: 8 o ,9 o ,10 o ,12 o , #3, and #5<br />
Requires our patented hosel collar insert system.<br />
.350 hosel bore<br />
Exclusive<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.350 hosel bore<br />
heel/toe #1: 115mm<br />
SP-700 Ti (C-cup face)<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 45<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
Specs for the X-Factor Ti<br />
#1<br />
8 o<br />
56 o<br />
198<br />
55<br />
430<br />
#1<br />
9 o<br />
56 o<br />
198<br />
55<br />
430<br />
#1<br />
10 o<br />
56 o<br />
198<br />
55<br />
430<br />
The X-Factor forged Titanium features<br />
the ultimate in titanium technology<br />
combined with a sleek, modern<br />
design that plays amazingly well<br />
and looks fantastic. Four piece hot<br />
forging titanium gives a very pleasing<br />
sound and a solid feel. With a maximum<br />
COR thin face and extremely<br />
large sweet area, the X-Factor Ti<br />
woods will provide incredible distance<br />
and forgiveness. The X-Factor was<br />
explicitly designed to perform better<br />
than other similar component ti heads<br />
that only care about cosmetics. Not<br />
the X-Factor-it performs!!<br />
. low spin, very thin hot face.<br />
. durable chrome finish<br />
Requires Our Patented Insert System<br />
.350 Insert<br />
stock #HCIR3<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
requires insert hcir3<br />
2 degree closed face<br />
RH only<br />
#1<br />
12 o<br />
56 o<br />
198<br />
55<br />
430<br />
#3<br />
15 o<br />
57 o<br />
208<br />
45<br />
230<br />
#5<br />
19 o<br />
58 o<br />
218<br />
43<br />
210<br />
[ 39 ]
ob72 1/26/05 12:26 PM Page 40<br />
M-40 Forged <strong>Irons</strong><br />
stock #M40I<br />
RH: 3-PW, SW, AW and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 40 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 83mm<br />
blade height #5: 53mm<br />
carbon steel<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
21 o<br />
58 o<br />
243<br />
2.0<br />
. carbon steel forging face for soft feel.<br />
. low center of gravity.<br />
. durable polished chrome finish.<br />
#4<br />
24 o<br />
59 o<br />
250<br />
2.0<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 16<br />
bottom of hosel to heel: 28mm<br />
hosel depth: 36mm<br />
topline width: 5mm<br />
#5<br />
27 o<br />
60 o<br />
257<br />
1.5<br />
#6<br />
30 o<br />
61 o<br />
264<br />
1.5<br />
#7<br />
34 o<br />
62 o<br />
271<br />
1.0<br />
#8<br />
37 o<br />
63 o<br />
279<br />
1.0<br />
#9<br />
41 o<br />
64 o<br />
287<br />
0.5<br />
PW<br />
45 o<br />
64 o<br />
295<br />
0.5<br />
5 o<br />
AW<br />
48 o<br />
64 o<br />
295<br />
0.5<br />
6 o<br />
SW<br />
53 o<br />
64 o<br />
296<br />
0.5<br />
9 o<br />
LW<br />
60 o<br />
65 o<br />
300<br />
0.5<br />
7 o<br />
The M-40 irons are a classic. This head design features a<br />
unique half cavity which not only gives great playability,<br />
but also a forged muscle back feel. Made by a unique<br />
investment forged process that offers both the precision of<br />
casting and the feel of forging, that is a soft solid feel. The<br />
M-40 offers a clean look at address with a compact blade,<br />
a traditional thin top line, cambered sole and minimal offsets.<br />
The M-40 irons are the result of a meticulous design<br />
effort by tournament golfers and our technical staff. The<br />
extreme playability for different levels of golfers, plus a<br />
very, very solid feel helped by the softer 1030 carbon steel<br />
construction, without question make the M-40 far superior<br />
to others. We say this without apology: the M-40 irons<br />
are the best hitting and feeling component irons of this<br />
type on the market. Take it to the bank!<br />
Sold in sets: 3-PW<br />
individual pieces: #5, #7, AW, SW, LW<br />
This head requires a ferrule.<br />
we recommend:<br />
9/16” Silver/Black<br />
stock #FBSGI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 14mm<br />
modified square grooves<br />
polished chrome finish<br />
RH only
ob72 1/26/05 12:26 PM Page 41<br />
<strong>Pro</strong> <strong>Swing</strong> Wood <strong>Irons</strong><br />
stock #IW<br />
RH only: 13 o ,16 o ,19 o ,22 o ,25 o ,28 o and 31 o<br />
Must be countersunk for use with graphite shafts.<br />
Cannot be bent for loft/lie.<br />
Recommended Lengths<br />
13 o : 42.5” to 43”<br />
16 o : 41.5” to 42”<br />
19 o : 40.5” to 41”<br />
22 o : 40.0” to 41”<br />
25 o : 38.0” to 38.5”<br />
28 o : 37.5” to 38.0”<br />
31 o : 37.0” to 37.5”<br />
The 13, 16, 19 and 22 require a .335 ferrule<br />
.335 3/8” wood ferrule<br />
stock #FMBS<br />
The 25, 28 and 31 require a .370 ferrule<br />
special ferrule<br />
stock #IWFI<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
heel/toe<br />
Specs for the Wood Iron<br />
Strongly requested by many of our customers<br />
who have trouble hitting long irons and oversized<br />
fairway woods-the Wood Iron was<br />
designed for you! The generously rounded sole,<br />
short hosel and Hypersteel construction offers<br />
an extremely playable alternative to long irons<br />
and oversized fairway woods. The 13 o ,16 o ,19 o ,<br />
22 o are used in place of a #3 through #7 fairway<br />
woods and use .335” (wood) shafts.<br />
However, the 25 o ,28 o ,31 o are tooled to replace<br />
the #3, #4, and #5 irons and use .370” iron<br />
shafts with the same, shorter lengths as the<br />
respective irons they replace. The Wood Iron<br />
head design, combined with the shorter shaft,<br />
provides more control, more distance and a<br />
higher trajectory than standard long (#3, #4,<br />
#5) irons. The Wood <strong>Irons</strong> are a perfect set of<br />
fairway woods/long irons to use in conjunction<br />
with one of our iron sets that are available 5-<br />
PW (not all irons are available in 5-PW).<br />
These are definite game improvement clubs for<br />
the novice or accomplished player, male or<br />
female, young or old.<br />
. mix and match 7 different lofts to fill distance gaps.<br />
. very forgiving fairway woods.<br />
. added trajectory for long irons.<br />
. great for all skill levels.<br />
Due to the popularity of hybrid styles, shaft manufacturers have produced shafts specifically engineered for use in them.<br />
Although other shafts can work well, for most players, we recommend using these shafts.<br />
Tech Info<br />
.335/.370 hosel bore<br />
450 Hyper Steel Alloy<br />
Hardness: 40<br />
bottom of hosel to heel: 24mm<br />
hosel depth: 37mm<br />
heel/toe 13 degree: 100<br />
#1w<br />
13 o<br />
54 o<br />
200<br />
40<br />
100<br />
#3w<br />
16 o<br />
54 o<br />
200<br />
40<br />
96<br />
#5w<br />
19 o<br />
54 o<br />
206<br />
39<br />
90<br />
#7w<br />
22 o<br />
55 o<br />
213<br />
39<br />
88<br />
requires ferrule (see above)<br />
square face angles<br />
RH only<br />
#3i<br />
25 o<br />
56 o<br />
219<br />
36<br />
86<br />
#4i<br />
28 o<br />
56 o<br />
222<br />
35<br />
85<br />
#5i<br />
31 o<br />
57 o<br />
230<br />
33<br />
85<br />
[ 41 ]
ob72 1/26/05 12:28 PM Page 42<br />
Fireball <strong>Irons</strong><br />
stock #FBI<br />
RH: 3-PW, SW, and LW<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
. low center of gravity<br />
. high moment of inertia promotes forgiveness and distance.<br />
. progressive offsets.<br />
[ 42 ]<br />
Exclusive<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
blade length #5: 84mm<br />
blade height #5: 56mm<br />
431 stainless<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
#3<br />
21 o<br />
58 o<br />
242<br />
2.5<br />
#4<br />
24 o<br />
59 o<br />
249<br />
2.5<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
hardness: 22<br />
bottom of hosel to heel: 30mm<br />
hosel depth: 35mm<br />
topline width: 5mm<br />
#5<br />
27 o<br />
60 o<br />
256<br />
2.0<br />
#6<br />
30 o<br />
61 o<br />
263<br />
1.5<br />
#7<br />
33 o<br />
62 o<br />
270<br />
1.5<br />
#8<br />
37 o<br />
63 o<br />
277<br />
1.0<br />
#9<br />
41 o<br />
64 o<br />
285<br />
1.0<br />
PW<br />
44 o<br />
64 o<br />
294<br />
0.5<br />
5 o<br />
SW<br />
53 o<br />
64 o<br />
294<br />
0.5<br />
9 o<br />
LW<br />
58 o<br />
64 o<br />
295<br />
0.5<br />
7 o<br />
Our Fireball irons are truly beautifully crafted iron<br />
heads as well as very high performance, game improvement<br />
clubs. These irons feature a deep, undercut cavity<br />
channel embedded within a thick mass area at the rear<br />
of the sole. This design moves weight back away from<br />
the face while lowering the center of gravity. This<br />
reduces twisting on mis-hits, provides optimal trajectory,<br />
increased spin on all shots and yields a very, very solid,<br />
soft feel on all hits (even mis-hits)! The playability is<br />
enhanced by a four-way cambered sole, thin top-line<br />
and minimal offsets for easy, accurate alignment. The<br />
Fireball irons are so attractive, your golf buddies will not<br />
be able to take their eyes off of them! Ultra forgiving,<br />
ultra playable and ultra attractive! The Fireball irons<br />
rank among the best irons on the planet!!<br />
cavity channel<br />
Sold in sets: 3-PW or 5-PW<br />
individual pieces: #5, #7, SW, LW<br />
This head requires a ferrule.<br />
we recommend:<br />
9/16” Silver/Black<br />
stock #FBSGI<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 15mm<br />
modified square grooves<br />
chrome finish<br />
RH only
ob72 1/26/05 12:28 PM Page 43<br />
Fireball Titanium<br />
.350 stock #FBTI .335 stock# FBSTI<br />
RH: 8 o ,9 o ,10 o and 12 o<br />
Requires our patented hosel collar insert system.<br />
Ti Driver requires Our Patented Insert System<br />
Recommended<br />
Shafts (.335):<br />
Recommended<br />
Shafts (.350):<br />
Tech Info<br />
.335 Insert<br />
stock #HCIR2<br />
.350 Insert<br />
stock #HCIR3<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> Lite Weight<br />
<strong>Trident</strong> Superlite L or A flex<br />
Penley Graphite Lite<br />
<strong>Pro</strong>Launch 45/55<br />
For a higher trajectory, use:<br />
<strong>Trident</strong> T4 A and L flexes<br />
UST XL A-flex<br />
Penley ETA 55 R flex<br />
.335 or .350 hosel bore<br />
heel/toe #1: 112mm<br />
15-3-3-3 Ti Alloy<br />
The latest, greatest slugger for golfers is here-the Accura 420cc Fireball<br />
Ti. This may be one of our best Ti drivers ever, as our testers gave this<br />
great driver rave reviews-for both distance and accuracy!! So the Fireball<br />
Ti not only hits longer than other drivers, (some testers rated it “much<br />
longer” than their Callaway tm and Ping tm drivers) but the ball flies true and<br />
straight down the fairway. The Fireball Ti not only has a very thin variable<br />
face of special heat treated 15-3-3-3 Ti for absolute maximum COR, but<br />
also utilizes a new L-Beam clubface design that minimizes energy dissipation<br />
at impact and effectively expands the sweetspot area. Finished in a<br />
rich gloss black with chromed Ti-this is one beautiful head as well!<br />
Specs for the Fireball Ti driver<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#1<br />
8 o<br />
56 o<br />
198<br />
56<br />
420<br />
#1<br />
9 o<br />
56 o<br />
198<br />
56<br />
420<br />
#1<br />
10 o<br />
56 o<br />
198<br />
56<br />
420<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> UL 3.5<br />
<strong>Trident</strong> Superlite R or S flex<br />
Accuflex Evolution<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> T4 R and S flexes<br />
<strong>Trident</strong> 350 UL<br />
Penley Graphite Lite R and S<br />
hardness: 41<br />
hosel depth: 38mm<br />
bottom of hosel to heel: 32mm<br />
Fireball Fairway Woods<br />
stock #FBW<br />
RH: #3, #5, and #7<br />
Fairway wood is a<br />
.335 hosel bore.<br />
#1<br />
12 o<br />
56 o<br />
198<br />
56<br />
420<br />
Specs for the Fireball Fairway Woods<br />
club<br />
loft<br />
lie<br />
weight<br />
face ht<br />
volume<br />
#3<br />
15 o<br />
56 o<br />
210<br />
36<br />
200<br />
For a lower trajectory, use:<br />
<strong>Trident</strong> Black Snake<br />
<strong>Trident</strong> Ultralite 2.8<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
For a lower trajectory, use:<br />
Penley Stealth 70<br />
Grafalloy <strong>Pro</strong>Lite 35<br />
Aldila NV<br />
#5<br />
18 o<br />
56.5 o<br />
218<br />
35<br />
190<br />
requires insert hcir2 or hcir3<br />
1-2 degree closed face (#1 only)<br />
right hand only<br />
#7<br />
21 o<br />
57 o<br />
223<br />
34<br />
185<br />
[ 43 ]
ob72 1/26/05 12:28 PM Page 44<br />
Miracle Wedge<br />
stock #MIRW<br />
RH only: 52 o and 60 o<br />
[ 44 ]<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
wedge<br />
52 o<br />
64 o<br />
300<br />
0.0<br />
4 o<br />
Miracle Oversize Wedge<br />
stock #MIROW<br />
RH only: 52 o ,55 o and 60 o<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
wedge<br />
60 o<br />
64 o<br />
300<br />
0.0<br />
6 o<br />
wedge<br />
52 o<br />
64 o<br />
302<br />
1.0<br />
4 o<br />
wedge<br />
55 o<br />
64 o<br />
302<br />
1.0<br />
6 o<br />
wedge<br />
60 o<br />
64 o<br />
302<br />
1.0<br />
4 o<br />
.can be bent up to 2 o<br />
for loft/lie<br />
.must be countersunk for use with graphite shafts<br />
Would you like to see your ball bounce and stop – or back up when you<br />
hit pitch shots onto a green? With the “Miracle Wedge” we guarantee you<br />
more backspin than with any other wedge on the market! Unlike standard<br />
wedges with a sandblasted face – or an insert – which quickly lose their<br />
roughness and friction, then have to rely only on grooves for backspin, the<br />
new Miracle Wedge has a unique hitting face made up of hundreds of tiny<br />
steel knobs that literally grab the ball and impart incredible spin to it. Just<br />
more backspin than you’ve ever experienced before! This face is more<br />
durable than any other and will literally last a lifetime!<br />
Requires a Ferrule<br />
we recommend<br />
9/16” silver/grey<br />
stock #FBSGI<br />
.431 Stainless Steel-hardness rating 21.<br />
..370” hosel bore.<br />
.Bottom of hosel to heel=42mm.<br />
.Hosel depth=33mm.<br />
.Requires ferrule.<br />
.can be bent up to 2 o<br />
for loft/lie<br />
.must be countersunk for use with graphite shafts<br />
To compliment the original Miracle Wedge, we offer the oversize model<br />
of the highest spin wedge ever created!! Made with the same spin face as<br />
the original!! We designed an oversize head that is easier to use for the<br />
average player with a more rounded sole and improved leading edge. We<br />
have also reduced the bounce of each Oversize Miracle Wedge for easier<br />
playability from the fairway or around the greens. In addition to unparalleled<br />
spin, the Oversize Miracle Wedge provides incredible forgiveness.<br />
Fly it at the flag with the Oversize Miracle Wedge!!<br />
Requires a Ferrule<br />
we recommend<br />
9/16” silver/grey<br />
stock #FBSGI<br />
.431 Stainless Steel-hardness rating 21.<br />
..370” hosel bore.<br />
.Bottom of hosel to heel=42mm.<br />
.Hosel depth=34mm.<br />
.Requires ferrule.
ob72 1/26/05 12:28 PM Page 45<br />
Accura Diamond Face Wedges<br />
stock #ADFW<br />
RH/LH: 56 o ,58 o and 60 o<br />
Accura Fairway irons<br />
stock #AFI<br />
RH only: 15 o ,18 o and 21 o<br />
.Hyper Steel-hardness rating 38.<br />
..335” hosel bore.<br />
.Bottom of hosel to heel=46mm.<br />
.Hosel depth=36mm.<br />
A revolutionary design! We think the Accura Diamond Face Wedges are the best<br />
looking, best performing wedges on the market today!<br />
*Best spin wedge on the market (other than our Miracle Wedge)! The hard, diamond<br />
face and redistributed weight promote optimal trajectory and unequalled spin.<br />
*Great playability with the oversize blade and four-way grind sole.<br />
*Extremely attractive with our unique sandblasted cavity finish and tungsten copper inserts.<br />
*The sole cavity and topline inserts raise the CG for a more boring, higher spinning<br />
shot like the <strong>Pro</strong>’s hit!<br />
must be countersunk for use with graphite shafts<br />
can be bent up to 2 o for loft or lie<br />
This head requires a ferrule.<br />
we recommend the<br />
9/16” black/copper<br />
stock #fcobi<br />
The very popular Accura Fairway Iron combines a hardened steel body with heel and toe tungsten<br />
inserts for a low center of gravity and maximum perimeter weighting. The design of the Accura<br />
Fairway Iron gives the control and accuracy of an iron combined with the power and distance of a<br />
wood. It can be used in any type of lie or playing condition to effortlessly hit the ball higher, longer,<br />
and straighter. The response to this club has been truly phenomenal. Try one today!!<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
face ht<br />
wedge<br />
15 o<br />
57 o<br />
218<br />
3.5<br />
35<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
wedge<br />
18 o<br />
57 o<br />
225<br />
3.5<br />
35<br />
wedge<br />
56 o<br />
64 o<br />
302<br />
0.0<br />
8 o<br />
wedge<br />
21 o<br />
57 o<br />
230<br />
3.5<br />
35<br />
wedge<br />
58 o<br />
64 o<br />
302<br />
0.0<br />
6 o<br />
Recommended Lengths<br />
15 o : 42” to 43”<br />
18 o : 41” to 42”<br />
21 o : 41” to 42”<br />
wedge<br />
60 o<br />
64 o<br />
302<br />
0.0<br />
6 o<br />
.431 Stainless Steel-hardness rating 21.<br />
..370” hosel bore.<br />
.Bottom of hosel to heel=41mm.<br />
.Hosel depth=37mm.<br />
.Requires ferrule. Hosel OD=15mm<br />
Due to the popularity of hybrid styles, shaft manufacturers<br />
have produced shafts specifically engineered for use in<br />
them. Although other shafts can work well, for most<br />
players, we recommend using these shafts.<br />
Must be countersunk for use with graphite shafts.<br />
Can not be bent for loft or lie.<br />
Requires a special ferrule.<br />
requires the 3/8” black<br />
stock #fmbfi<br />
[ 45 ]
ob72 1/26/05 12:29 PM Page 46<br />
KB IV Tour Spin Wedges<br />
stock #KB4TS<br />
RH only: 48 o ,52 o ,56 o and 60 o<br />
Must be countersunk for use with graphite shafts.<br />
Can be bent up to 2 o for loft or lie.<br />
[ 46 ]<br />
56 o<br />
This head requires a ferrule.<br />
Recommended<br />
Shafts:<br />
Tech Info<br />
we recommend the<br />
5/8” black<br />
stock #fmbi<br />
For a higher trajectory, use:<br />
Apollo Shadow<br />
Dynalite Gold<br />
TX-90<br />
.370 hosel bore<br />
431 stainless<br />
hardness: 21<br />
52 o<br />
The latest in a successful line of wedges, the new KB-4 Tour<br />
wedges. The loft/bounce configuration has been fine tuned to<br />
provide the maximum playability for any type of shot requirement.<br />
The weight has been positioned to produce a more<br />
boring trajectory without compromising spin ratios or forgiveness.<br />
The rough face helps to increase spin, while the<br />
tumble finish will improve durability for a long lasting, terrific<br />
look. With four equally spaced loft configurations, we’ve<br />
made it easier than ever to mix and match lofts to fill gaps.<br />
48 o<br />
60 o<br />
For a medium trajectory, use:<br />
<strong>Trident</strong> Power Hinge<br />
<strong>Trident</strong> Vibracore<br />
<strong>Trident</strong> D-Mass<br />
Custom Lite<br />
bottom of hosel to heel: 41mm<br />
hosel depth: 35mm<br />
topline width: 6mm<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
wedge<br />
48 o<br />
64 o<br />
300<br />
0.5<br />
3 o<br />
wedge<br />
52 o<br />
64 o<br />
300<br />
0.5<br />
5 o<br />
wedge<br />
56 o<br />
64 o<br />
300<br />
0.5<br />
6 o<br />
wedge<br />
60 o<br />
64 o<br />
300<br />
0.5<br />
2 o<br />
. high spin with boring trajectory.<br />
. soft, solid feel.<br />
. multiple lofts to fill distance gaps.<br />
For a lower trajectory, use:<br />
TT Dynamic Gold SL<br />
TT Dynamic Gold<br />
TT TX-Tour<br />
Rifle<br />
hosel OD: 15mm<br />
modified square grooves<br />
RH only
ob72 1/26/05 12:29 PM Page 47<br />
Accura RAK Wedges<br />
stock #RAK<br />
RH only: 48 o ,52 o and 60 o<br />
must be countersunk for use with graphite shafts<br />
can be bent up to 2 o for loft or lie<br />
Acclaim Wedge<br />
stock #ACLIMSW<br />
RH only: 60 o<br />
SW-52 o<br />
Never hit a fat shot again!! The Accura RAK wedges eliminate the problem with the<br />
half-shot, the short lob or the chip from a tight lie. We guarantee these wedges are the<br />
easiest to hit in the industry- no other compares! Why are the RAK wedges better than<br />
pro line? These wedges employ our 4DW design- with an extended and rounded leading<br />
edge, and a special 4-way cambered sole with reduced bounce angles. Add a plasma<br />
induced diamond face for extra spin, and you’ve got an unbeatable scoring club.<br />
AW-48 o<br />
LW-60 o<br />
club<br />
loft<br />
lie<br />
weight<br />
offset<br />
bounce<br />
AW<br />
48 o<br />
64 o<br />
302<br />
0.0<br />
5 o<br />
This head requires a ferrule.<br />
we recommend the<br />
9/16” black/gold<br />
stock #fmbgi<br />
Simply the most effective specialty club we have ever sold, the Acclaim wedge has it all.<br />
The radiused sole, curved leading edge, and oversized face glides effortlessly through<br />
long grass or sand without any twisting of the club face. Not recommended for a tight<br />
lie in fairways.<br />
Loft<br />
60 o<br />
•431 Stainless<br />
•.370 Bore, parallel tip<br />
•Hosel Depth 35mm<br />
•Bottom of hosel to heel 50mm<br />
Lie Wt<br />
o<br />
64 302<br />
must be countersunk for use with graphite shafts<br />
can be bent up to 2 o for loft or lie<br />
This head requires a ferrule.<br />
we recommend the<br />
3/8” black<br />
stock #fmbis<br />
SW<br />
52 o<br />
64 o<br />
302<br />
0.0<br />
8 o<br />
Heel/toe Face Ht bounce<br />
81 70 10 o<br />
LW<br />
60 o<br />
64 o<br />
302<br />
0.0<br />
6 o<br />
.431 Stainless Steel<br />
.Hardness rating 22<br />
..370” hosel bore<br />
.Hosel depth=38mm<br />
.Available 48 o ,52 o ,60 o<br />
[ 47 ]
ob72 1/26/05 12:29 PM Page 48<br />
Z-Style Putters<br />
recommended length: 33-35”<br />
face length: 145mm<br />
depth: 100mm<br />
milled aluminum<br />
weight: 350g<br />
Z-05A<br />
stock #Z05A<br />
uses 35” or 50” triple bend shaft<br />
<strong>Pro</strong> Series Putters<br />
recommended length: 33-35”<br />
face length: 96mm<br />
weight: 386g<br />
3 Ball Blade Putter<br />
stock #3BB<br />
uses straight shaft<br />
face length: 84mm<br />
weight: 350g<br />
1 Ball Putter<br />
stock #1BPT<br />
uses 35” or 50” triple bend shaft<br />
face length: 85mm<br />
weight: 340g<br />
3 Ball Putter<br />
stock #3BPT<br />
uses 35” or 50” triple bend shaft<br />
face length: 101mm<br />
weight: 400g<br />
RH/LH! RH/LH!<br />
RH/LH!<br />
Early Birdie and ISO Putters<br />
recommended length: 33-35”<br />
face length: 121mm<br />
weight: 300g<br />
Early Birdie <strong>Model</strong> A<br />
stock #EBPA<br />
uses straight shaft (YEST)<br />
Long/Belly Style Putters<br />
recommended length: 41-49”<br />
face length: 110mm<br />
[ 48 ]<br />
weight: 445g<br />
Long Putter <strong>Model</strong> 1*<br />
stock #LPT1<br />
uses straight 53” shaft<br />
face length: 100mm<br />
weight: 300g<br />
Z-05B<br />
stock #Z05B<br />
uses straight shaft<br />
face length: 121mm<br />
weight: 300g<br />
Early Birdie <strong>Model</strong> B<br />
stock #EBPB<br />
uses straight shaft (YEST)<br />
face length: 121mm<br />
weight: 445g<br />
Long Putter <strong>Model</strong> 2<br />
stock #LPT2<br />
uses straight 53” shaft<br />
face length: 100mm<br />
weight: 350g<br />
Z-05C<br />
stock #Z05C<br />
uses straight shaft<br />
face length: 111mm<br />
weight: 300g<br />
Early Birdie <strong>Model</strong> C<br />
stock #EBPC<br />
uses straight shaft (YEST)<br />
face length: 135mm<br />
weight: 400g<br />
Long Putter <strong>Model</strong> 3*<br />
stock #LPT3<br />
uses straight 53” shaft<br />
True Balance<br />
recommended length: 33-35”<br />
face length: 101mm<br />
head weight: 345g<br />
Head/shaft sold together already<br />
assembled. Just cut to length and grip.<br />
True Balance Putter<br />
stock #TBALPT<br />
head/shaft sold as a unit<br />
4 Way Balance Putter<br />
Double Hump Putter<br />
stock #DHPT<br />
uses straight shaft (YEST)<br />
face length: 115mm<br />
weight: 320g<br />
ISO <strong>Model</strong> C<br />
stock #ISOC<br />
uses straight shaft (YEST)<br />
* indicates that we also have the same style available in a head that will accommodate a standard length.<br />
face length: 137mm<br />
weight: 400g<br />
Brass Ball Face<br />
stock #BBPT<br />
uses straight 53” shaft
ob72 1/26/05 12:29 PM Page 49<br />
Dynapower Shafts<br />
<strong>Pro</strong> <strong>Swing</strong> is proud to offer our Dyna Power line of shafts. High fiber graphite throughout yields a very strong and reliable material for performance<br />
and durability. A scratch resistant finish provides added protection to extend the life of the shaft.<br />
Black: available in:<br />
iron: R, S, A and Lite<br />
wood: R, S and Lite<br />
Dyna Power Wood Specs<br />
Flex<br />
Stock #<br />
Tip Diam<br />
Butt Diam<br />
Raw Length<br />
Weight<br />
Torque<br />
Bend Point<br />
Lite<br />
EGWL<br />
.335<br />
.580<br />
45”<br />
73g<br />
5.0 o<br />
Low<br />
Regular<br />
EGWR<br />
.335<br />
.580<br />
45”<br />
73g<br />
4.7 o<br />
Mid<br />
Stiff<br />
EGWS<br />
.335<br />
.580<br />
45”<br />
74g<br />
4.5 o<br />
Mid<br />
Dyna Power Iron Specs<br />
Flex<br />
Stock #<br />
Tip Diam<br />
Butt Diam<br />
Raw Length<br />
Weight<br />
Torque<br />
Bend Point<br />
Lite<br />
EGIL<br />
.370<br />
.580<br />
39”<br />
70g<br />
4.5 o<br />
Low<br />
Regular<br />
EGIR<br />
.370<br />
.580<br />
39”<br />
72g<br />
4.0 o<br />
Mid<br />
Stiff<br />
EGIS<br />
.370<br />
.580<br />
39”<br />
72g<br />
4.0 o<br />
Mid<br />
Club<br />
tip trim<br />
#1i<br />
0”<br />
Black/Platinum: available in:<br />
iron: R, S, A and Lite<br />
wood: R, S, A and Lite<br />
Green: available in:<br />
iron: R, S, and Lite<br />
wood: R, S and Lite<br />
Gold: available in:<br />
iron: R and S only<br />
wood: R, S and Lite<br />
Grey: available in:<br />
iron: R, S, A and Lite<br />
wood: R, S and Lite<br />
Matte Blue: available in:<br />
iron: S and A only<br />
wood: R, S and A<br />
Red/Black: available in:<br />
iron R only<br />
Shaft trimming instructions for Dyna Power shafts: Wood<br />
shafts are butt trim only. For iron shafts, use the charts<br />
below to determine tip trim, then butt trim to length.<br />
Tip trim for Dyna Power iron shafts<br />
Balloon Graphite Shafts<br />
Balloon Shafts<br />
Balloon shafts have a slightly firmer tip than most graphite shafts which provides stability and a slightly lower trajectory. We have incorporated a<br />
standard weight along with a “bulge” region just below the grip. This combination provides a more consistent shot pattern for irons and woods.<br />
Shaft<br />
Iron L-flex<br />
Iron A-flex<br />
Iron R-flex<br />
Iron S-flex<br />
Wood L-flex<br />
Wood A-flex<br />
Wood R-flex<br />
Wood S-flex<br />
stock #<br />
BAGIL<br />
BAGIA<br />
BAGIR<br />
BAGIS<br />
BAGAL<br />
BAGAA<br />
BAGAR<br />
BAGAS<br />
tip/butt<br />
.370/.580<br />
.370/.580<br />
.370/.580<br />
.370/.580<br />
.335/.590<br />
.335/.590<br />
.335/.590<br />
.335/.590<br />
weight<br />
86g<br />
87g<br />
88g<br />
89g<br />
89g<br />
90g<br />
91g<br />
91g<br />
torque<br />
4.5 o<br />
4.5 o<br />
4.0 o<br />
4.0 o<br />
4.5 o<br />
4.5 o<br />
4.0 o<br />
4.0 o<br />
length<br />
39”<br />
39”<br />
39”<br />
39”<br />
45”<br />
45”<br />
45”<br />
45”<br />
bend pt<br />
mid<br />
mid<br />
mid-hi<br />
mid-hi<br />
mid<br />
mid<br />
mid-hi<br />
mid-hi<br />
#2i<br />
0”<br />
#3i<br />
0”<br />
#4i<br />
.5”<br />
#5i<br />
1”<br />
#6i<br />
1.5”<br />
#7i<br />
2”<br />
Available in: All Black or Copper/Grey*<br />
#8i<br />
2.5”<br />
#9i<br />
3”<br />
wedges<br />
3”<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a standard weight, firm tip, low spin and medium low ball<br />
flight. Tip trim to length. This design will not accommodate butt trimming.<br />
*Not all shafts/flexes are available in both colors.<br />
[ 49 ]
ob72 1/26/05 12:41 PM Page 50<br />
VibraCore<br />
<strong>Trident</strong> 350 UL .350<br />
[ 50 ]<br />
Our .350 tip Ultralite is the same design as the industry leading pro line. We recommend this shaft for all of our .350 hosel Ti<br />
heads. These can also be used as a replacement shaft for any .350 OEM product (including those requiring a bore-thru).<br />
Shaft<br />
A-Flex<br />
R-Flex<br />
S-Flex<br />
stock #<br />
350ULA<br />
350ULR<br />
350ULS<br />
<strong>Trident</strong> Shafts<br />
Vibration dampening technology is increasingly popular among pro and amateur players alike. The Vibracore Vibration Dampening System<br />
offers clubmakers the best value and quality in feel enhancing graphite. These shafts are designed to build confidence with their wonderful feel<br />
and performance. Light weight (but not Ultralite)Vibracore shafts are absolutely the best graphite shafts available for irons!!<br />
Available in: Matte Black or Silver<br />
Shaft<br />
Iron A-flex<br />
Iron R-flex<br />
Iron S-flex<br />
Wood A-flex<br />
Wood R-flex<br />
Wood S-flex<br />
stock #<br />
VIBIA<br />
VIBIR<br />
VIBIS<br />
VIBWA<br />
VIBWR<br />
VIBWS<br />
<strong>Trident</strong> Black Snake<br />
Shaft<br />
Iron R-flex<br />
Iron S-flex<br />
Wood R-flex<br />
Wood S-flex<br />
Wood X-flex<br />
48” X-flex<br />
stock #<br />
BLSIR<br />
BLSIS<br />
BLSWR<br />
BLSWS<br />
BLSWX<br />
BLS48X<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
.370/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.350/.580<br />
.350/.595<br />
.350/.595<br />
weight<br />
78g<br />
80g<br />
80g<br />
68g<br />
68g<br />
68g<br />
weight<br />
68g<br />
71g<br />
60g<br />
61g<br />
65g<br />
68g<br />
weight<br />
60g<br />
62g<br />
63g<br />
torque<br />
3.9 o<br />
3.5 o<br />
3.5 o<br />
4.0 o<br />
3.7 o<br />
3.7 o<br />
torque<br />
2.5 o<br />
2.5 o<br />
2.9 o<br />
2.8 o<br />
2.4 o<br />
2.4 o<br />
torque<br />
3.9 o<br />
3.5 o<br />
3.5 o<br />
length<br />
41”<br />
41”<br />
41”<br />
45”<br />
45”<br />
45”<br />
length<br />
39”<br />
39”<br />
45”<br />
45”<br />
45”<br />
48”<br />
length<br />
46”<br />
46”<br />
46”<br />
bend pt<br />
mid-lo<br />
mid<br />
mid<br />
mid-lo<br />
mid<br />
mid<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
bend pt<br />
mid-lo<br />
mid<br />
mid<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking an ultralite weight with a medium firm tip and a<br />
medium trajectory. Fits a wide range of player types.<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a light weight, medium firm tip, low spin and<br />
medium ball flight. Vibration dampening reduces fatigue and wear.<br />
A revolution in graphite shaft design! The precise positioning of internal hinges and external steps help to provide a boost in structural<br />
integrity and overall performance. The Black Snake provides the rare combination of an extremely strong, ultralite shaft that is<br />
suitable for use with titanium or steel drivers and fairway woods.<br />
<strong>Trident</strong> Power Hinge<br />
Shaft<br />
Iron R-flex<br />
Iron S-flex<br />
Wood A-flex<br />
Wood R-flex<br />
Wood S-flex<br />
stock #<br />
TBTIR<br />
TBTIS<br />
TBTA<br />
TBTR<br />
TBTS<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
weight<br />
85g<br />
87g<br />
77g<br />
79g<br />
82g<br />
torque<br />
3.0 o<br />
3.0 o<br />
3.3 o<br />
3.0 o<br />
3.0 o<br />
length<br />
39”<br />
39”<br />
45”<br />
45”<br />
45”<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
Available in: Gloss Black only<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking an ultralite, firm tip, low spin and moderate to<br />
low ball flight. Step pattern increases stability and performance.<br />
The Power Hinge design puts more mass in an optimum position, just above the tip. This absorbs shock and vibration, transmitting only that<br />
solid feel that inspires confidence. The unique Power Hinge design allows the tip section to act as a hinge-storing power until near impact where<br />
it releases energy. A terrific shaft for use with fairway woods. The iron shaft is the most stable graphite we have tested.<br />
<strong>Trident</strong> T4XL .350<br />
Shaft<br />
L-Flex<br />
A-Flex<br />
R-Flex<br />
S-Flex<br />
stock #<br />
T4XLL<br />
T4XLA<br />
T4XLR<br />
T4XLS<br />
tip/butt<br />
.350/.585<br />
.350/.595<br />
.350/.600<br />
.350/.600<br />
weight<br />
45g<br />
46g<br />
47g<br />
47g<br />
torque<br />
4.9 o<br />
4.7 o<br />
3.9 o<br />
3.8 o<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
bend pt<br />
mid-lo<br />
mid-lo<br />
mid<br />
mid-hi<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a super light weight with a medium firm tip and<br />
a medium trajectory. Incredible stability in a super light shaft.<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a standard weight graphite with a firm tip and a<br />
medium trajectory. Very stable and reliable through impact.<br />
<strong>Trident</strong> is proud to offer the lightest and strongest .350 tip shaft in the industry, the T4 XL. The unique design increases swing speed and<br />
provides the highest level of stability and performance ever offered in a super lite style shaft. The T4 gets our highest recommendation!<br />
Available in: Matte Black, Matte Grey and Deep Red<br />
Available in: Matte Black, Matte Grey and Yellow
ob72 1/26/05 12:41 PM Page 51<br />
<strong>Trident</strong> Ultralite 2.8<br />
<strong>Trident</strong> Shafts<br />
Shaft stock # tip/butt weight torque<br />
L-Flex TRIULL .335/.580 62g 3.5<br />
A-Flex TRIULA .335/.580 63g<br />
R-Flex TRIULR .335/.600 64g<br />
S-Flex TRIULS .335/.600 65g<br />
o<br />
3.1 o<br />
2.8 o<br />
2.8 o<br />
In a continuing effort to enhance performance, <strong>Trident</strong> has developed a series of high performance ultralite shafts. The <strong>Trident</strong> UL 2.8 is designed<br />
for faster swing speeds by incorporating lower torque and a higher bend point. <strong>Trident</strong> is proud to offer such high quality shafts at an extremely<br />
competitive price to compliment our full line of innovative products.<br />
length bend pt<br />
46” mid<br />
Available in: Gloss Black or Silver<br />
46” mid<br />
46” mid-hi<br />
Shaft <strong>Pro</strong>file<br />
46” mid-hi<br />
For the better player seeking an ultralite weight, firm tip, low spin and lower ball flight. Lower torque provides stability for faster tempos.<br />
<strong>Trident</strong> Ultralite 3.5<br />
The <strong>Trident</strong> Ultralite 3.5 has become our benchmark ultralite shaft. The <strong>Trident</strong> UL 3.5 is our best selling shaft for good reason.<br />
The combination of torque, weight and bend point make it the most consistent performer when compared to all other ultralite<br />
shafts. We challenge you to find a better shaft for use with steel or titanium drivers.<br />
Shaft<br />
L-Flex<br />
A-Flex<br />
R-Flex<br />
S-Flex<br />
stock #<br />
TUL35L<br />
TUL35A<br />
TUL35R<br />
TUL35S<br />
tip/butt<br />
.335/.580<br />
.335/.580<br />
.335/.590<br />
.335/.590<br />
weight<br />
60g<br />
60g<br />
61g<br />
62g<br />
torque<br />
3.8 o<br />
3.6 o<br />
3.5 o<br />
3.5 o<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
bend pt<br />
mid-lo<br />
mid-lo<br />
mid<br />
mid<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking an ultralite weight, medium firm tip, low spin and<br />
moderate ball flight. Fits a wide range of player types and ability.<br />
<strong>Trident</strong> Super Lite<br />
Available in: Matte Black, Matte Grey and Gloss Blue<br />
stock # tip/butt weight torque<br />
TSLL .335/.580 48g 4.7<br />
TSLA .335/.590 49g<br />
TSLR .335/.610 49g<br />
TSLS .335/.610 50g<br />
TSLX .335/.610 51g<br />
o<br />
4.5 o<br />
4.0 o<br />
3.9 o<br />
3.8 o<br />
.335 equivalent to the .350 T4XL<br />
The <strong>Trident</strong> SuperLite is an engineering marvel! The Super Lite design has a reinforced tip and a more solid feel than any other brand of super<br />
lite graphite. Better performance than comparable national brand shafts at half the price! Available in: Gloss Black and Silver<br />
Shaft<br />
length bend pt<br />
L-Flex<br />
46” mid-lo<br />
A-Flex<br />
46” mid-lo<br />
R-Flex<br />
46” mid<br />
S-Flex<br />
46” mid<br />
X-Flex<br />
46” mid<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a super lite weight, medium firm tip, and moderate ball flight. Unbelievable stability in a super lite design.<br />
<strong>Trident</strong> Lite Weight<br />
stock # tip/butt weight torque<br />
TL75L .335/.580 68g 5.0<br />
TL75A .335/.580 70g<br />
TL75R<br />
TL75S<br />
.335/.600<br />
.335/.600<br />
75g<br />
75g<br />
o<br />
4.6 o<br />
4.0 o<br />
3.9 o<br />
The <strong>Trident</strong> Lite Weight shaft has superior quality graphite, and is precision crafted for a truly high quality premium shaft. In fact, this shaft has much better quality<br />
than similar models by other graphite shaft manufacturers at a much lower price. Especially good performing in fairway woods. A great deal!<br />
Shaft<br />
length bend pt<br />
Available in: Gloss Black only<br />
L-Flex<br />
44” low<br />
A-Flex<br />
45” low<br />
R-Flex<br />
S-Flex<br />
45”<br />
45”<br />
mid-lo<br />
mid-lo<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a light weight, medium firm tip, and moderate ball flight.<br />
<strong>Trident</strong> Hybrid XRT<br />
Specifically designed for use with hybrid type clubs. Available in: Matte Black only<br />
Shaft<br />
.370 R-Flex<br />
.370 S-Flex<br />
.335 L-Flex<br />
.335 R-Flex<br />
.335 S-Flex<br />
stock #<br />
XRTIR<br />
XRTIS<br />
XRTWL<br />
XRTWR<br />
XRTWS<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
.335/.600<br />
.335/.610<br />
.335/.610<br />
D-Mass Graphite Iron Shafts<br />
weight<br />
87g<br />
87g<br />
72g<br />
73g<br />
74g<br />
torque<br />
3.8 o<br />
3.8 o<br />
4.0 o<br />
3.9 o<br />
3.8 o<br />
length<br />
43”<br />
43”<br />
43”<br />
43”<br />
43”<br />
bend pt<br />
mid<br />
mid<br />
low<br />
mid-lo<br />
mid-lo<br />
Shaft <strong>Pro</strong>file<br />
The best hybrid shaft available in golf.<br />
stock # tip/butt wt. torq.<br />
DMIR .370/.600 75g 3.5<br />
DMIWR .370/.600<br />
DMIS .370/.600<br />
DMIWS .370/.600<br />
75g<br />
75g<br />
75g<br />
[ 51 ]<br />
o<br />
3.5 o<br />
3.5 o<br />
3.5 o<br />
The D-Mass are constant weight and tip cut to flex. Sold in sets 3-pw with additional wedge shafts available. The bend point moves to optimize trajectory.<br />
Shaft<br />
length bend pt<br />
Available in: Gloss Black only<br />
3-pw R-Flex<br />
39-35.5” variable<br />
wedge R-flex<br />
3-pw S-Flex<br />
wedge S-flex<br />
35.5”<br />
39-35.5”<br />
35.5”<br />
high<br />
variable Shaft <strong>Pro</strong>file<br />
For the player seeking a light weight, medium firm tip, and moderate ball flight.<br />
high
ob72 1/26/05 12:41 PM Page 52<br />
True Temper steel Shafts<br />
TT Lite<br />
Shaft<br />
R/S Wood<br />
R/S Iron<br />
A/L Wood<br />
A/L Iron<br />
Dynalite<br />
Shaft<br />
R/S Wood<br />
R/S Iron<br />
A/L Wood<br />
A/L Iron<br />
Dynamic<br />
Shaft<br />
R/S Wood<br />
R/S Iron<br />
Release<br />
Shaft<br />
Men’s Wood<br />
Men’s Iron<br />
Lady’s Wood<br />
Lady’s Iron<br />
Dynamic Gold<br />
Shaft<br />
Wood R300*<br />
Wood S300*<br />
Wood X100<br />
Iron R300**<br />
Iron S300**<br />
Iron X100<br />
stock #<br />
UTTLWC<br />
UTTLIC<br />
U2LWAL<br />
U2LIAL<br />
stock #<br />
ULWC<br />
ULIC<br />
ULWAL<br />
ULIAL<br />
stock #<br />
UDWC<br />
UDIC<br />
stock #<br />
USLWM<br />
USLIM<br />
USLWL<br />
USLIL<br />
stock #<br />
UDGWR3<br />
UDGWS3<br />
UDGWX1<br />
UDGIR3<br />
UDGIS3<br />
UDGIX1<br />
Dynamic Gold SL<br />
Shaft<br />
Iron R300<br />
Iron S300<br />
stock #<br />
UDGSLIR3<br />
UDGSLIS3<br />
Dynamic Gold Lite<br />
Shaft<br />
Wood R300<br />
Wood S300<br />
Iron R300<br />
Iron S300<br />
Shaft<br />
Wood R300<br />
Wood S300<br />
Iron R300<br />
Iron S300<br />
[ 52 ]<br />
Dynalite Gold<br />
stock #<br />
DGLWR3<br />
DGLWS3<br />
DGLIR3<br />
DGLIS3<br />
stock #<br />
ULGWR3<br />
ULGWS3<br />
ULGIR3<br />
ULGIS3<br />
tip/butt<br />
.335/.600<br />
.370/.600<br />
.335/.580<br />
.370/.580<br />
tip/butt<br />
.335/.600<br />
.370/.600<br />
.335/.580<br />
.370/.580<br />
tip/butt<br />
.335/.600<br />
.370/.600<br />
tip/butt<br />
.335/.600<br />
.370/.600<br />
.335/.580<br />
.370/.580<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.370/.600<br />
.370/.600<br />
.370/.600<br />
tip/butt<br />
.370/.600<br />
.370/.605<br />
tip/butt<br />
.335/.610<br />
.335/.610<br />
.370/.610<br />
.370/.610<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.370/.600<br />
.370/.600<br />
weight<br />
126g<br />
128g<br />
110g<br />
110g<br />
weight<br />
127g<br />
122g<br />
110g<br />
112g<br />
weight<br />
131g<br />
129g<br />
weight<br />
110g<br />
117g<br />
106g<br />
103g<br />
weight<br />
125g<br />
127g<br />
124g<br />
127g<br />
130g<br />
130g<br />
weight<br />
106g<br />
106g<br />
weight<br />
110g<br />
113g<br />
109g<br />
109g<br />
weight<br />
112g<br />
112g<br />
118g<br />
118g<br />
length<br />
48”<br />
43”<br />
46”<br />
40”<br />
length<br />
47”<br />
42”<br />
46”<br />
41”<br />
length<br />
47”<br />
41”<br />
length<br />
45”<br />
43”<br />
44”<br />
39”<br />
length<br />
46”<br />
46”<br />
46”<br />
41”<br />
41”<br />
41”<br />
length<br />
41”<br />
41”<br />
length<br />
46”<br />
46”<br />
41”<br />
41”<br />
length<br />
46”<br />
46”<br />
41”<br />
41”<br />
bend pt<br />
mid<br />
mid<br />
mid<br />
mid<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
bend pt<br />
high<br />
high<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
bend pt<br />
high<br />
high<br />
high<br />
high<br />
high<br />
high<br />
bend pt<br />
high<br />
high<br />
bend pt<br />
mid<br />
mid<br />
mid<br />
mid<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a medium firm tip and medium trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a soft tip and high trajectory. Fits average<br />
to slightly below average swing speeds and/or slow tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a light weight, soft tip and high trajectory. Fits<br />
slower than average swing speeds and/or slow tempos.<br />
*available in a .350 tip wood shaft<br />
**available in R400 and S400 .355 taper irons<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
New for 2005!<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a light weight, firm tip and low trajectory.<br />
Fits average to faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a light weight, medium firm tip and medium<br />
trajectory. Fits average swing speeds and/or moderate tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a light weight, soft tip and high trajectory.<br />
Fits average swing speeds and/or slow to moderate tempos.
ob72 1/26/05 12:41 PM Page 53<br />
True Temper steel Shafts<br />
TX-90<br />
Shaft<br />
Wood Regular<br />
Wood Stiff<br />
Iron Senior<br />
Iron Regular<br />
Iron Stiff<br />
TX-Tour<br />
Shaft<br />
Iron Regular<br />
Iron Stiff<br />
stock #<br />
TX90WR<br />
TX90WS<br />
TX90IA<br />
TX90IR<br />
TX90IS<br />
stock #<br />
TXTIR<br />
TXTIS<br />
Crossfire Hybrid<br />
Shaft<br />
.335 Fairway R<br />
.335 Fairway S<br />
.370 Iron Reg.<br />
.370 Iron Stiff<br />
stock #<br />
UCFWR<br />
UCFWS<br />
UCFIR<br />
UCFIS<br />
tip/butt<br />
.335/.610<br />
.335/.610<br />
.370/.600<br />
.370/.600<br />
.370/.600<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.370/.600<br />
.370/.600<br />
weight<br />
105g<br />
109g<br />
100g<br />
104g<br />
107g<br />
weight<br />
105g<br />
106g<br />
weight<br />
96g<br />
96g<br />
98g<br />
100g<br />
length<br />
46”<br />
46”<br />
41”<br />
41”<br />
41”<br />
length<br />
41”<br />
41”<br />
length<br />
44”<br />
44”<br />
41”<br />
41”<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
low<br />
bend pt<br />
high<br />
high<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
*also available in a .350 tip wood shaft<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a light weight, soft tip and high trajectory.<br />
Fits average to slower than average swing speeds and/or slower tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a light weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For use in Hybrid type clubs. <strong>Pro</strong>vides that stability of steel in an ultralite<br />
steel shaft. <strong>Pro</strong>vides added trajectory and carry distance.<br />
True Temper Sensicore Shafts<br />
Custom Lite with SensiCore<br />
Shaft<br />
Iron R/S<br />
Iron A/L<br />
stock #<br />
SCLIRS<br />
SCLIAL<br />
tip/butt<br />
.370/.610<br />
.370/.580<br />
Dynamic Gold with SensiCore<br />
Shaft<br />
Wood R300<br />
Wood S300<br />
Iron R300<br />
Iron S300<br />
stock #<br />
SDGWR3<br />
SDGWS3<br />
SDGIR3<br />
SDGIS3<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.370/.600<br />
.370/.600<br />
weight<br />
117g<br />
114g<br />
weight<br />
121g<br />
123g<br />
124g<br />
127g<br />
Dynamic Gold Lite with SensiCore<br />
Shaft<br />
Wood R300<br />
Wood S300<br />
Iron R300<br />
Iron S300<br />
Shaft<br />
Wood R300<br />
Wood S300<br />
Iron R300<br />
Iron S300<br />
SensiCore Technology<br />
SensiCore is a patented technology designed to absorb the vibration of hitting a golf shot. A frequency tuned polymer core, located<br />
inside the shaft, eliminates up to 70% of unwanted vibration at impact. SensiCore radically improves feel and provides golfers the<br />
ability to practice and play longer because it decreases the harmful effects of "shock" on the hands, wrists, elbows, and shoulders.<br />
stock #<br />
SDGLWR3<br />
SDGLWS3<br />
SDGLIR3<br />
SDGLIS3<br />
tip/butt<br />
.335/.610<br />
.335/.610<br />
.370/.610<br />
.370/.610<br />
Dynalite Gold with SensiCore<br />
stock #<br />
SYLWR3<br />
SYLWS3<br />
SYLIR3<br />
SYLIS3<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.370/.600<br />
.370/.600<br />
weight<br />
114g<br />
117g<br />
113g<br />
113g<br />
weight<br />
116g<br />
116g<br />
120g<br />
124g<br />
length<br />
43”<br />
43”<br />
length<br />
46”<br />
46”<br />
41”<br />
41”<br />
length<br />
46”<br />
46”<br />
41”<br />
41”<br />
length<br />
45”<br />
45”<br />
40”<br />
40”<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
high<br />
high<br />
high<br />
high<br />
bend pt<br />
mid<br />
mid<br />
mid<br />
mid<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a medium firm tip and medium trajectory<br />
with a soft feel. Fits average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a light weight, soft tip and high trajectory.<br />
Fits average swing speeds and/or slow to moderate tempos.<br />
[ 53 ]
ob72 1/26/05 12:41 PM Page 54<br />
Shadow<br />
Shaft<br />
R/S Wood<br />
R/S Iron<br />
A/L Wood<br />
A/L Iron<br />
Standard Steel<br />
Shaft<br />
R/S Wood<br />
R/S Iron<br />
A/L Wood<br />
A/L Iron<br />
Rifle Woods<br />
Shaft<br />
5.5 Wood<br />
6.0 Wood<br />
6.5 Wood<br />
7.0 Wood<br />
Shaft<br />
Rifle iron Sets<br />
Rifle Wedges<br />
Rifle #1/2<br />
Rifle Woods<br />
Diamond Rifle<br />
[ 54 ]<br />
Stepless Steel<br />
Shaft<br />
Iron R/S<br />
Wood R/S<br />
Apollo steel Shafts<br />
stock #<br />
SHWRS<br />
SHIRS<br />
SHWAL<br />
SHIAL<br />
stock #<br />
ASTEPIRS<br />
ASTEPWRS<br />
stock #<br />
SSWRS<br />
SSIRS<br />
SSWAL<br />
SSIAL<br />
stock #<br />
UFMWR55<br />
UFMWR60<br />
UFMWR65<br />
UFMWR70<br />
tip/butt<br />
.335/.600<br />
.370/.600<br />
.335/.580<br />
.370/.580<br />
tip/butt<br />
.370/.580<br />
.335/.580<br />
tip/butt<br />
.335/.600<br />
.370/.600<br />
.335/.580<br />
.370/.580<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
weight<br />
128g<br />
122g<br />
122g<br />
110g<br />
weight<br />
130g<br />
133g<br />
weight<br />
135g<br />
130g<br />
133g<br />
120g<br />
weight<br />
123g<br />
124g<br />
129g<br />
129g<br />
length<br />
47”<br />
42”<br />
45”<br />
40”<br />
length<br />
41”<br />
46”<br />
length<br />
46”<br />
40”<br />
45”<br />
39”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
bend pt<br />
low<br />
low<br />
low<br />
low<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
mid<br />
mid<br />
mid<br />
mid<br />
bend pt<br />
high<br />
high<br />
high<br />
high<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a soft tip and high trajectory. Fits average<br />
to slightly below average swing speeds and/or slow tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a medium firm tip and medium trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a medium firm tip and medium trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
Royal Precision Shafts<br />
Rifle <strong>Irons</strong><br />
Shaft<br />
Iron set 5.5<br />
#1/2 iron 5.5<br />
Wedge 5.5<br />
Iron set 6.5<br />
#1/2 iron 6.5<br />
Wedge 6.5<br />
sold as<br />
3-pw<br />
#1/2<br />
Wedge<br />
3-pw<br />
#1/2<br />
Wedge<br />
Diamond Rifle <strong>Irons</strong><br />
Shaft<br />
5.0 Iron<br />
6.0 Iron<br />
stock #<br />
DRIFIR<br />
DRIFIS<br />
stock #<br />
UFMRI55<br />
URI55<br />
URW55<br />
UFMRI65<br />
URI65<br />
URW65<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
Trim instructions for Rifle shafts<br />
Trim instruction<br />
butt trim only<br />
butt trim only<br />
Chart: RI<br />
Chart: RW<br />
Chart: RI<br />
tip/butt<br />
.370/.610<br />
.370/.610<br />
.370/.610<br />
.370/.610<br />
.370/.610<br />
.370/.610<br />
weight<br />
128g<br />
134g<br />
weight<br />
110-135g<br />
135g<br />
110g<br />
110-135g<br />
135g<br />
110g<br />
length<br />
43.5”<br />
43.5”<br />
length<br />
41-36”<br />
41”<br />
36”<br />
41-36”<br />
41”<br />
36”<br />
bend pt<br />
high<br />
high<br />
bend pt<br />
high<br />
high<br />
high<br />
high<br />
high<br />
high<br />
Chart RI iron 1<br />
tip trim 0.00”<br />
Chart RW wood 1<br />
tip trim 0.00”<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a standard weight, firm tip and low trajectory.<br />
Fits faster than average swing speeds and/or quick tempos.<br />
2<br />
.625”<br />
3<br />
1.5”<br />
3<br />
1.25”<br />
5<br />
3.0”<br />
4<br />
1.875”<br />
7<br />
4.5”<br />
5<br />
2.5”<br />
9<br />
4.5”<br />
6<br />
3.125”<br />
11<br />
4.5”<br />
7<br />
3.75”<br />
8<br />
4.375”<br />
9<br />
5.0”<br />
wedges<br />
5.625”<br />
Use the above charts for Royal Precision Rifle shafts only! Determine the<br />
amount to be trimmed from the tip, then butt trim to the final playing length.
ob72 1/26/05 1:59 PM Page 55<br />
Harrison Graphite Shafts<br />
<strong>Pro</strong> 2.5 Ultra Lite<br />
Grafalloy Graphite Shafts<br />
Blue<br />
Shaft<br />
A/R<br />
F/S<br />
<strong>Pro</strong>totype Comp NT<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
Shaft<br />
R-Flex*<br />
S-Flex*<br />
X-Flex<br />
stock #<br />
GBLUR<br />
GBLUS<br />
GBLUX<br />
<strong>Pro</strong>Launch Blue<br />
Shaft<br />
45 A-Flex<br />
45 R-Flex<br />
45 S-Flex<br />
55 R-Flex<br />
55 S-Flex<br />
65 R-Flex*<br />
65 S-Flex*<br />
75 R-Flex<br />
75 S-Flex<br />
<strong>Pro</strong>Lite 35/45<br />
Shaft<br />
35 R-Flex*<br />
35 S-Flex*<br />
35 X-Flex<br />
45 R-flex<br />
45 S-flex<br />
stock #<br />
GPLB45A<br />
GPLB45R<br />
GPLB45S<br />
GPLB55R<br />
GPLB55S<br />
GPLB65R<br />
GPLB65S<br />
GPLB75R<br />
GPLB75S<br />
stock #<br />
GL35WR<br />
GL35WS<br />
GL35WX<br />
GL45WR<br />
GL45WS<br />
<strong>Pro</strong> Custom <strong>Irons</strong>/Woods<br />
Shaft<br />
R/S Iron<br />
R/S Wood<br />
A/L Iron<br />
A/L Wood<br />
stock #<br />
HP25R<br />
HP25S<br />
Classic Lite Mid Launch<br />
Shaft<br />
A/R<br />
F/S<br />
Striper J<br />
Shaft<br />
R/F<br />
F/S<br />
stock #<br />
HCLMIDR<br />
HCLMIDS<br />
stock #<br />
HSJR<br />
HSJS<br />
stock #<br />
GCNTR<br />
GCNTS<br />
stock #<br />
GPCIRS<br />
GPCWRS<br />
GPCIAL<br />
GPCWAL<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
*Grafalloy Blue R and S flexes are also available in .350 tip<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.595<br />
.335/.595<br />
.335/.595<br />
.335/.600<br />
.335/.605<br />
.335/.600<br />
.335/.605<br />
.335/.600<br />
.335/.600<br />
weight<br />
62g<br />
63g<br />
63g<br />
weight<br />
44g<br />
44g<br />
48g<br />
56g<br />
57g<br />
64g<br />
64g<br />
75g<br />
76g<br />
torque<br />
2.8 o<br />
2.8 o<br />
2.8 o<br />
length<br />
46”<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
bend pt<br />
high<br />
high<br />
high<br />
*<strong>Pro</strong>Launch Blue 65 R and S flexes are also available in .350 tip<br />
tip/butt<br />
.335/.605<br />
.335/.605<br />
.335/.605<br />
.335/.605<br />
.335/.605<br />
tip/butt<br />
.370/.590<br />
.335/.600<br />
.370/.590<br />
.335/.595<br />
weight<br />
70g<br />
70g<br />
weight<br />
70g<br />
70g<br />
weight<br />
63g<br />
63g<br />
weight<br />
63g<br />
64g<br />
weight<br />
62g<br />
64g<br />
66g<br />
60g<br />
62g<br />
weight<br />
77g<br />
70g<br />
74g<br />
68g<br />
torque<br />
2.5 o<br />
2.5 o<br />
torque<br />
3.9 o<br />
3.9 o<br />
torque<br />
3.8 o<br />
3.8 o<br />
torque<br />
3.1 o<br />
3.1 o<br />
torque<br />
5.0 o<br />
5.0 o<br />
5.0 o<br />
4.0 o<br />
4.0 o<br />
3.2 o<br />
2.8 o<br />
2.9 o<br />
2.9 o<br />
torque<br />
3.5 o<br />
3.5 o<br />
3.5 o<br />
4.5 o<br />
4.5 o<br />
torque<br />
3.9 o<br />
5.0 o<br />
4.1 o<br />
5.0 o<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
length<br />
43”<br />
48”<br />
43”<br />
48”<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
bend pt<br />
high<br />
high<br />
high<br />
mid<br />
mid<br />
bend pt<br />
mid<br />
mid<br />
mid<br />
mid<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and low trajectory. Fits above<br />
average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and mid trajectory. Fits average<br />
to above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and mid trajectory. Fits average<br />
to above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and mid trajectory. Fits average<br />
to above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and low trajectory. Fits above<br />
average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a medium firm tip and medium high<br />
trajectory. Fits different swing types depending on model.<br />
*<strong>Pro</strong>Lite 35 is also available in .350 tip Regular and Stiff (black only).<br />
<strong>Pro</strong>Lite 35 avail. in black or burgundy, <strong>Pro</strong>Lite 45 avail. in black only.<br />
Shaft <strong>Pro</strong>file<br />
<strong>Pro</strong>Lite 35 produces a low ball flight and fits faster swing speeds.<br />
<strong>Pro</strong>Lite 45 produces a mid trajectory and fits average swing speeds.<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a medium firm tip and medium trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
[ 55 ]
ob72 1/26/05 12:41 PM Page 56<br />
Aldila One High/Mid/Low Launch<br />
Shaft<br />
Hi Launch R<br />
Hi Launch S<br />
Mid Launch R<br />
Mid Launch S<br />
Low Launch R<br />
Low Launch S<br />
Tour Gold 65<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
Excelerator<br />
Shaft<br />
60 Wood R<br />
60 Wood S<br />
A/L Wood<br />
A/L Iron<br />
R/S Wood<br />
R/S Iron<br />
V2000<br />
Shaft<br />
Iron L-Flex<br />
Wood L-Flex<br />
Iron R-Flex<br />
Wood R-Flex<br />
Iron S-Flex<br />
Wood S-Flex<br />
Value Series<br />
Shaft<br />
A/L Wood<br />
A/L Iron<br />
R/S Wood<br />
R/S Iron<br />
Longwood<br />
Shaft<br />
Tour X<br />
50/50 R-Flex<br />
50/50 S-Flex<br />
[ 56 ]<br />
NV 55/65/75<br />
Shaft<br />
55 R-Flex<br />
55 S-Flex<br />
65 R-Flex*<br />
65 S-Flex*<br />
75 R-Flex<br />
75 S-Flex<br />
NVS 65<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
Aldila Graphite Shafts<br />
stock #<br />
ANV55R<br />
ANV55S<br />
ANV65R<br />
ANV65S<br />
ANV75R<br />
ANV75S<br />
stock #<br />
NVSR<br />
NVSS<br />
stock #<br />
A1HIR<br />
A1HIS<br />
A1MIDR<br />
A1MIDS<br />
A1LOR<br />
A1LOS<br />
stock #<br />
TG65R<br />
TG65S<br />
stock #<br />
AE60R<br />
AE60S<br />
AEXWAL<br />
AEXIAL<br />
AEXWRS<br />
AEXIRS<br />
stock #<br />
AV2IL<br />
AV2WL<br />
AV2IR<br />
AV2WR<br />
AV2IS<br />
AV2WS<br />
stock #<br />
AWAL<br />
AIAL<br />
AWRS<br />
AIRS<br />
stock #<br />
ALGWT<br />
ALGWR<br />
ALGWS<br />
*Aldila NV 65 R and S flexes are also available in .350 tip<br />
tip/butt<br />
.335/.615<br />
.335/.620<br />
.335/.620<br />
.335/.625<br />
.335/.620<br />
.335/.625<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.590<br />
.370/.585<br />
.335/.600<br />
.370/.605<br />
tip/butt<br />
.370/.590<br />
.335/.585<br />
.370/.600<br />
.335/.600<br />
.370/.605<br />
.335/.605<br />
tip/butt<br />
.335/.585<br />
.370/.580<br />
.335/.600<br />
.370/.600<br />
tip/butt<br />
.335/.610<br />
.335/.600<br />
.335/.600<br />
weight<br />
56g<br />
57g<br />
67g<br />
67g<br />
78g<br />
78g<br />
weight<br />
67g<br />
67g<br />
67g<br />
67g<br />
67g<br />
67g<br />
weight<br />
65g<br />
65g<br />
weight<br />
63g<br />
65g<br />
71g<br />
78g<br />
77g<br />
85g<br />
weight<br />
75g<br />
70g<br />
80g<br />
72g<br />
82g<br />
76g<br />
weight<br />
77g<br />
79g<br />
87g<br />
88g<br />
weight<br />
68g<br />
50g<br />
55g<br />
torque<br />
3.9 o<br />
3.9 o<br />
3.5 o<br />
3.5 o<br />
2.8 o<br />
2.8 o<br />
torque<br />
3.6 o<br />
3.6 o<br />
3.2 o<br />
3.2 o<br />
2.8 o<br />
2.8 o<br />
torque<br />
3.1 o<br />
3.1 o<br />
torque<br />
4.9 o<br />
4.9 o<br />
4.7 o<br />
4.5 o<br />
4.6 o<br />
4.3 o<br />
torque<br />
4.2 o<br />
4.8 o<br />
4.1 o<br />
4.7 o<br />
4.0 o<br />
4.5 o<br />
torque<br />
5.5 o<br />
4.5 o<br />
5.5 o<br />
4.5 o<br />
torque<br />
3.0 o<br />
4.5 o<br />
4.5 o<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
47”<br />
42”<br />
47”<br />
42”<br />
length<br />
40”<br />
45”<br />
40”<br />
45”<br />
40”<br />
45”<br />
length<br />
46”<br />
41”<br />
46”<br />
41”<br />
length<br />
50”<br />
50”<br />
50”<br />
bend pt<br />
mid<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
mid-hi<br />
*Aldila NVS 65 R and S flexes are also available in .350 tip<br />
tip/butt<br />
.335/.625<br />
.335/.625<br />
weight<br />
67g<br />
67g<br />
torque<br />
3.6 o<br />
3.6 o<br />
length<br />
46”<br />
46”<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
low<br />
low<br />
mid<br />
mid<br />
high<br />
high<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
mid<br />
mid<br />
mid<br />
mid<br />
bend pt<br />
mid-lo<br />
mid-lo<br />
mid<br />
mid<br />
mid<br />
mid<br />
bend pt<br />
low<br />
low<br />
mid-lo<br />
mid-lo<br />
bend pt<br />
mid-hi<br />
mid-lo<br />
mid-lo<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and mid trajectory. Fits average<br />
to above average swing speeds and/or tempos. Has performed<br />
extremely well in our launch monitor testing with titanium heads.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and medium trajectory. Fits<br />
average to slightly above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
Playability varies based on model chosen.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and medium low trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
Playability varies based on model chosen.<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a medium firm tip and medium trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the average player seeking a soft tip and high trajectory. Fits<br />
average to slightly below average swing speeds and/or slow tempos.<br />
Shaft <strong>Pro</strong>file<br />
For use in long drive competitions.
ob72 1/26/05 1:54 PM Page 57<br />
<strong>Pro</strong>Force XL<br />
Shaft<br />
A-Flex*<br />
R-Flex*<br />
S-Flex*<br />
iRod Hybrid<br />
Shaft<br />
Long Iron R<br />
Long Iron S<br />
Utility R<br />
Utility S<br />
Fairway R<br />
Fairway S<br />
Low Carb<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
UST Graphite Shafts<br />
stock #<br />
USTXLA<br />
USTXLR<br />
USTXLS<br />
<strong>Pro</strong>Force 65/75 Gold<br />
Shaft<br />
65 R-Flex*<br />
65 S-Flex*<br />
75 R-Flex<br />
75 S-Flex<br />
65 L-Flex<br />
stock #<br />
USTGO65R<br />
USTGO65S<br />
USTGO75R<br />
USTGO75S<br />
USTGO65L<br />
stock #<br />
IRODIR<br />
IRODIS<br />
IRODUR<br />
IRODUS<br />
IRODWR<br />
IRODWS<br />
stock #<br />
USTLCR<br />
USTLCS<br />
tip/butt<br />
.335/.595<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.610<br />
.335/.610<br />
.335/.615<br />
.335/.618<br />
.335/.580<br />
<strong>Pro</strong>Force RV2 Graphite Iron<br />
Shaft<br />
Iron 75 R-Flex<br />
Iron 75 S-Flex<br />
Iron 95 R-Flex<br />
Iron 95 S-Flex<br />
iRod Driver<br />
Shaft<br />
R-Flex*<br />
S-Flex*<br />
stock #<br />
RV75IR<br />
RV75IS<br />
RV95IR<br />
RV95IS<br />
stock #<br />
IRODDR<br />
IRODDS<br />
*<strong>Pro</strong>Force XL A, R and S flexes are also available in .350 tip<br />
tip/butt<br />
.370/.595<br />
370/.600<br />
370/.600<br />
370/.600<br />
tip/butt<br />
.335/.605<br />
.335/.605<br />
tip/butt<br />
.370/.595<br />
.370/.600<br />
.370/.595<br />
.370/.600<br />
.335/.610<br />
.335/.610<br />
tip/butt<br />
.335/.615<br />
.335/.615<br />
weight<br />
58g<br />
61g<br />
61g<br />
weight<br />
71g<br />
71g<br />
77g<br />
81g<br />
66g<br />
weight<br />
81g<br />
83g<br />
94g<br />
95g<br />
Harmon Tour Design CB 60/65/70<br />
Shaft<br />
CB 60 R-Flex<br />
CB 60 S-Flex<br />
CB 65 R-Flex<br />
CB 65 S-Flex<br />
CB 70 R-Flex<br />
CB 70 S-Flex<br />
stock #<br />
HCB60R<br />
HCB60S<br />
HCB65R<br />
HCB65S<br />
HCB70R<br />
HCB70S<br />
weight<br />
65g<br />
65g<br />
weight<br />
78g<br />
81g<br />
81g<br />
83g<br />
73g<br />
73g<br />
weight<br />
52g<br />
52g<br />
torque<br />
4.0 o<br />
3.9 o<br />
3.9 o<br />
torque<br />
2.6 o<br />
2.6 o<br />
torque<br />
2.3 o<br />
2.3 o<br />
2.4 o<br />
2.4 o<br />
3.4 o<br />
3.4 o<br />
torque<br />
3.7 o<br />
3.7 o<br />
length<br />
46”<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
44”<br />
length<br />
46”<br />
46”<br />
length<br />
41”<br />
41”<br />
41”<br />
41”<br />
44”<br />
44”<br />
length<br />
46”<br />
46”<br />
bend pt<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
*<strong>Pro</strong>Force 65 R and S flexes are also available in .350 tip<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.605<br />
.335/.605<br />
.335/.605<br />
weight<br />
59g<br />
60g<br />
66g<br />
68g<br />
71g<br />
71g<br />
torque<br />
3.4 o<br />
3.4 o<br />
3.3 o<br />
3.3 o<br />
3.6 o<br />
torque<br />
3.2 o<br />
3.2 o<br />
2.9 o<br />
2.9 o<br />
torque<br />
3.8 o<br />
3.7 o<br />
3.3 o<br />
3.2 o<br />
3.4 o<br />
3.2 o<br />
length<br />
40”<br />
40”<br />
40”<br />
40”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
46”<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
high<br />
high<br />
mid<br />
bend pt<br />
mid-lo<br />
mid<br />
mid<br />
mid<br />
*iRod Driver R and S flexes are also available in .350 tip<br />
bend pt<br />
low<br />
low<br />
bend pt<br />
low<br />
low<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo Shaft <strong>Pro</strong>file<br />
A perfect choice for hybrid type clubs. Firm tip for stability.<br />
bend pt<br />
low<br />
low<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a medium firm tip and medium high trajectory.<br />
Shaft <strong>Pro</strong>file<br />
Playability varies depending on model.<br />
Shaft <strong>Pro</strong>file<br />
Playability varies depending on model.<br />
bend pt<br />
low<br />
low<br />
mid-lo<br />
mid-lo<br />
mid<br />
mid Shaft <strong>Pro</strong>file<br />
Playability varies depending on model.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip, light weight, low spin and<br />
high launch.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and high trajectory. Fits<br />
average to slightly above average swing speeds smooth tempos.<br />
[ 57 ]
ob72 1/26/05 12:41 PM Page 58<br />
Penley Graphite Shafts<br />
Caliente<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
G.A.S.<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
stock #<br />
PNGASR<br />
PNGASS<br />
ETA 55/ ETA 75/ETA Tour<br />
Shaft<br />
55 R-Flex*<br />
55 S-Flex*<br />
75 R-Flex<br />
75 S-Flex<br />
Tour S-Flex<br />
Tour X-Flex<br />
stock #<br />
PETA55R<br />
PETA55S<br />
PETA75R<br />
PETA75S<br />
PETAS<br />
PETAX<br />
Hybrid Heater 80/100<br />
Shaft<br />
80 R-Flex<br />
80 S-Flex<br />
100 R-Flex<br />
100 S-Flex<br />
Stealth 65/70<br />
Shaft<br />
Stealth 65 S<br />
Stealth 65 X<br />
Stealth 70 R*<br />
Stealth 70 S*<br />
stock #<br />
PNCALR<br />
PNCALS<br />
stock #<br />
PHH80R<br />
PHH80S<br />
PHH100R<br />
PHH100S<br />
stock #<br />
PNST60S<br />
PNST60X<br />
PNST70R<br />
PNST70S<br />
Graphite Lite <strong>Irons</strong>/Woods<br />
Shaft<br />
Iron L-Flex<br />
Iron A-Flex<br />
Iron R-Flex<br />
Iron S-Flex<br />
Wood L-Flex<br />
Wood A-Flex<br />
Wood R-Flex*<br />
Wood S-Flex*<br />
50” S-Flex<br />
Tour Lite<br />
Shaft<br />
A-Flex<br />
R-Flex*<br />
S-Flex*<br />
X-Flex<br />
50” XX-FLEX<br />
Ultron<br />
Shaft<br />
50” XX-Flex<br />
[ 58 ]<br />
stock #<br />
PNGLIL<br />
PNGLIA<br />
PNGLIR<br />
PNGLIS<br />
PNGLWL<br />
PNGLWA<br />
PNGLWR<br />
PNGLWS<br />
PNGL50S<br />
stock #<br />
PNTLA<br />
PNTLR<br />
PNTLS<br />
PNTLX<br />
PNTL50X<br />
stock #<br />
PNULTWX<br />
tip/butt<br />
.335/.610<br />
.335/.610<br />
tip/butt<br />
.335/.610<br />
.335/.610<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.605<br />
.335/.605<br />
tip/butt<br />
.370/.610<br />
.370/.610<br />
.370/.615<br />
.370/.615<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.605<br />
.335/.610<br />
tip/butt<br />
.370/.600<br />
.370/.600<br />
.370/.600<br />
.370/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.615<br />
weight<br />
64g<br />
66g<br />
weight<br />
81g<br />
81g<br />
weight<br />
57g<br />
57g<br />
78g<br />
78g<br />
67g<br />
67g<br />
weight<br />
80g<br />
82g<br />
103g<br />
103g<br />
weight<br />
65g<br />
66g<br />
71g<br />
73g<br />
torque<br />
3.4 o<br />
3.2 o<br />
torque<br />
4.3 o<br />
3.5 o<br />
torque<br />
4.3 o<br />
4.0 o<br />
2.6 o<br />
2.5 o<br />
2.5 o<br />
2.5 o<br />
torque<br />
3.9 o<br />
3.9 o<br />
2.1 o<br />
2.1 o<br />
torque<br />
2.9 o<br />
2.7 o<br />
3.5 o<br />
3.5 o<br />
length<br />
47”<br />
47”<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
47”<br />
47”<br />
47”<br />
47”<br />
length<br />
41”<br />
41”<br />
41”<br />
41”<br />
length<br />
47”<br />
47”<br />
46”<br />
46”<br />
bend pt<br />
mid<br />
mid-hi<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
*ETA 55 R and S flexes are also available in .350 tip<br />
bend pt<br />
mid-lo<br />
high<br />
mid-hi<br />
high<br />
high<br />
high<br />
bend pt<br />
mid<br />
mid<br />
mid-hi<br />
mid-hi<br />
*Stealth 70 R and S flexes are also available in .350 tip<br />
weight<br />
65g<br />
68g<br />
70g<br />
75g<br />
68g<br />
69g<br />
69g<br />
73g<br />
83g<br />
length<br />
41”<br />
41”<br />
41”<br />
41”<br />
46”<br />
46”<br />
46”<br />
46”<br />
50”<br />
bend pt<br />
high<br />
high<br />
high<br />
high<br />
*Graphite Lite R and S flexes are also available in .350 tip<br />
weight<br />
60g<br />
62g<br />
64g<br />
66g<br />
70g<br />
torque<br />
4.0 o<br />
3.9 o<br />
3.7 o<br />
3.3 o<br />
4.4 o<br />
4.4 o<br />
4.0 o<br />
3.9 o<br />
3.9 o<br />
length<br />
47”<br />
47”<br />
47”<br />
47”<br />
50”<br />
bend pt<br />
low<br />
low<br />
mid<br />
high<br />
low<br />
low<br />
mid<br />
mid<br />
mid<br />
*Tour Lite R and S flexes are also available in .350 tip<br />
weight<br />
90g<br />
torque<br />
3.5 o<br />
3.3 o<br />
3.1 o<br />
2.9 o<br />
2.9 o<br />
torque<br />
1.7 o<br />
length<br />
50”<br />
bend pt<br />
mid<br />
mid<br />
mid<br />
high<br />
high<br />
bend pt<br />
high<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a medium firm tip and medium trajectory.<br />
Fits average to slightly above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the player seeking a standard weight and medium low trajectory.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and lower trajectory. Fits<br />
above average swing speeds and/or faster tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and medium trajectory. Fits<br />
average to above average swing speeds and/or faster tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and low trajectory. Fits<br />
above average swing speeds and/or faster tempos.<br />
Shaft <strong>Pro</strong>file<br />
Playability varies depending on flex.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and medium trajectory. Fits<br />
average to above average swing speeds and/or faster tempos.<br />
Shaft <strong>Pro</strong>file<br />
For use in long drive competitions. XX-Flex for stability.
ob72 1/26/05 12:41 PM Page 59<br />
Accuflex Graphite Shafts<br />
VS 339<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
Evolution<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
CAS<br />
Shaft<br />
L-Flex<br />
A-Flex<br />
R-Flex<br />
S-Flex<br />
Icon V.2<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
Assassin 2<br />
Shaft<br />
R-Flex<br />
S-Flex<br />
stock #<br />
AFX339R<br />
AFX339S<br />
stock #<br />
AFEVOR<br />
AFEVOS<br />
stock #<br />
AFCASL<br />
AFCASA<br />
AFCASR<br />
AFCASS<br />
stock #<br />
AFXIC2R<br />
AFXIC2S<br />
stock #<br />
AFXWCR<br />
AFXWCS<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.590<br />
.335/.590<br />
.335/.590<br />
.335/.590<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
tip/butt<br />
.335/.600<br />
.335/.600<br />
weight<br />
67g<br />
69g<br />
weight<br />
70g<br />
72g<br />
weight<br />
60g<br />
60g<br />
60g<br />
60g<br />
weight<br />
66g<br />
68g<br />
weight<br />
65g<br />
67g<br />
torque<br />
2.8 o<br />
2.8 o<br />
torque<br />
2.8 o<br />
2.8 o<br />
torque<br />
3.9 o<br />
3.9 o<br />
3.9 o<br />
3.9 o<br />
torque<br />
3.2 o<br />
3.2 o<br />
torque<br />
3.5 o<br />
3.5 o<br />
Putter Shafts<br />
stock# tip/butt weight length<br />
straight 35” stepless putter YEST .370/.580 112g 35”<br />
straight 52” stepless putter LONGPT .370/.580 185g 52”<br />
double bend putter BEP1 .370/.580 135g 41”<br />
triple bend stepless putter TBEP .370/.580 115g 35”<br />
50” triple bend putter LTBEP .370/.580 176g 50”<br />
HM-30 putter HM30PT .370/.580 58g 36”<br />
HM-40 putter HM40PT .370/.580 82g 35”<br />
Graphite putter black PSIBL .370/.580 78g 37.5”<br />
Graphite putter gold PSIGO .370/.580 89g 35”<br />
length<br />
47”<br />
47”<br />
length<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
46”<br />
46”<br />
length<br />
46”<br />
46”<br />
length<br />
46.5”<br />
46.5”<br />
bend pt<br />
mid<br />
high<br />
bend pt<br />
mid<br />
mid<br />
bend pt<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
mid-lo<br />
bend pt<br />
mid-hi<br />
mid-hi<br />
bend pt<br />
mid<br />
mid<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and variable trajectory depending<br />
on flex. Fits above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking a firm tip and medium trajectory. Fits<br />
above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking an ultralite weight, firm tip and medium<br />
high trajectory. Fits average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking an ultralite weight, firm tip and medium<br />
low trajectory. Fits average to above average swing speeds and/or tempos.<br />
Shaft <strong>Pro</strong>file<br />
For the better player seeking an light weight, firm tip and medium<br />
trajectory. Fits average swing speeds and/or tempos.<br />
[ 59 ]
ob72 1/26/05 12:42 PM Page 60<br />
[ 60 ]<br />
Crossline Lite<br />
Men’s Standard: stock #CRSLT<br />
Crossline Lite Midsize<br />
Men’s Midsize: stock #CRSLTMID<br />
Crossline Lite Jumbo<br />
Men’s Jumbo: stock #CRSLTJ<br />
Crossline<br />
Men’s Standard .580: stock #CRSL58<br />
Men’s Standard .600: stock #CRSL60<br />
Men’s Midsize: stock #CRSLMID<br />
Men’s Jumbo: stock #CRSLJ<br />
Crossline Full Cord<br />
Men’s Standard .580: stock #CRSLFC<br />
Lamkin Grips<br />
Crossline Lady’s<br />
Lady’s: stock #CRSL56<br />
Crossline Black<br />
Men’s Standard .580: stock #CRSLBL<br />
Crossline Classic<br />
Men’s Standard .580: stock #CLC58<br />
Men’s Midsize: stock #CLCMID<br />
Crossline Classic Cord<br />
Men’s Standard .580: stock #CLCFC<br />
Black Tour Cord<br />
Men’s Standard .580: stock #BTC<br />
Perma Wrap<br />
Men’s Standard .580: stock #320G<br />
Men’s Oversize: stock #320MID<br />
Lady’s: stock #320LBL<br />
Perma Wrap Cord<br />
Men’s Standard .580: stock #320FC<br />
Men’s Oversize: stock #320FCMID<br />
44 grams<br />
54 grams<br />
67 grams<br />
Standard: 52g Midsize: 63g Jumbo: 75<br />
53 grams<br />
46 grams<br />
52 grams<br />
Standard: 52g Oversize: 63g<br />
53 grams<br />
53 grams<br />
Standard: 52g Oversize: 65g Lady’s: 50g<br />
Standard: 54g Oversize: 67g
ob72 1/26/05 12:42 PM Page 61<br />
Crossline Dual Density<br />
Men’s Standard: stock #CRSLDD<br />
Perma Wrap Classic<br />
Men’s Standard: stock #320CL<br />
Perma Wrap Classic Midsize<br />
Men’s Midsize: stock #320CLMID<br />
Perma Wrap Classic Jumbo<br />
Men’s Jumbo: stock #320CLJ<br />
Lamkin Grips<br />
Perma Wrap Classic Lady’s<br />
Lady’s: stock #320LCL<br />
White Line<br />
Men’s Standard: stock #KELWH<br />
Kelmac Wrap<br />
Men’s Standard: stock #KWRAP<br />
Ruff Wrap<br />
Men’s Standard: stock #KRW58<br />
Kelmac Grips<br />
48 grams<br />
52 grams<br />
66 grams<br />
80 grams<br />
44 grams<br />
60 grams<br />
48 grams<br />
49 grams<br />
[ 61 ]
ob72 1/26/05 12:42 PM Page 62<br />
Golf Pride Grips<br />
Dual Durometer<br />
Men’s Standard Round: stock #DDM60R<br />
Dual Durometer Midsize<br />
Men’s Midsize: stock #DDMMID<br />
Dual Durometer Lite<br />
Men’s Standard: stock #DDMLT<br />
Decade Multi Compound Cord<br />
Men’s Standard: stock #MCC60R<br />
Decade Lite Cord<br />
Men’s Standard: stock #DLC60<br />
Tour Velvet<br />
Men’s .580 Round: stock #VTM58R<br />
Men’s .600 Round: stock #VTM60R<br />
Men’s .580 Ribbed: stock #VTM58<br />
Men’s Midsize: stock #VTMMID<br />
Men’s Jumbo: stock #VTMJ<br />
Lady’s stock #VTL56<br />
Tour Velvet Cord<br />
Men’s Standard Round: stock #VTM58RFC<br />
[ 62 ]<br />
Tour Wrap<br />
Men’s .580 Round: stock #PMW58R<br />
Men’s .600 Round: stock #PMW60R<br />
Men’s .580 Ribbed: stock #PMW58<br />
Men’s Midsize: stock #PMWMID<br />
Lady’s stock #LTW56BL<br />
Tour Wrap Cord Round<br />
Men’s Standard .580: stock #TWFC<br />
Men’s Standard .600: stock #TWFC60<br />
Players Sofftie<br />
Men’s Standard: stock #PLSOF<br />
Men’s Midsize: stock #PLSOFMID<br />
Lady’s: stock #LPLSOF<br />
Players Sofftie Cord<br />
Men’s Standard: stock #PLSOFC<br />
49 grams<br />
56 grams<br />
38 grams<br />
44 grams<br />
38 grams<br />
Standard: 52g Midsize: 60g Lady’s: 47g<br />
54 grams<br />
Standard: 51g Midsize: 53g Jumbo: 61g Lady’s: 50g<br />
52 grams<br />
Standard: 53g Midsize: 65g Lady’s: 45g<br />
52 grams
ob72 1/26/05 12:42 PM Page 63<br />
Golf Pride Grips<br />
Whisper Black<br />
Men’s Standard Round: stock #WSP60R<br />
Men’s Midsize: stock #WSPMID<br />
Men’s Jumbo: stock #WSPJ<br />
Lady’s: stock #LWSP58<br />
Whisper Embossed<br />
Men’s Standard: stock #WSPEMB<br />
Whisper Blend<br />
Men’s Standard: stock #WSPWB<br />
Green Victory<br />
Men’s Round: stock #MVM58103<br />
Green Victory Full Cord<br />
Men’s Round: stock #VVC58103<br />
Men’s Trophy Cord<br />
Men’s Round: stock #MTFC58<br />
V-55<br />
Men’s Standard Round: stock #V55<br />
V-55 Full Cord<br />
Men’s Standard Round: stock #V55FC<br />
Specialty Tour Wrap <strong>Model</strong>s<br />
Taylor Made .670: stock #BUB670*<br />
Big Butt .865 Round: stock #PMW865<br />
Lady Blue Composition<br />
Lady’s Blue: stock #LCMBU<br />
Lady Green Composition<br />
Lady’s Blue: stock #LCMGN<br />
Standard: 40g Midsize: 53g Jumbo: 65g Lady’s: 45g<br />
43 grams<br />
47 grams<br />
52 grams<br />
52 grams<br />
55 grams<br />
51 grams<br />
51 grams<br />
*not pictured .670: 34g .865: 26g<br />
46 grams<br />
46 grams<br />
[ 63 ]
ob72 1/26/05 12:42 PM Page 64<br />
[ 64 ]<br />
G7 AVS<br />
Men’s Standard: stock #WING7<br />
Men’s Midsize: stock #WING7MID<br />
G8 AVS Black<br />
Men’s Standard: stock #WING8BL<br />
G8 AVS Blue<br />
Men’s Standard: stock #WING8NB<br />
V17 XF Arrow Grey<br />
Men’s Standard: stock #V17XFGY<br />
Men’s Midsize: stock #V17XFGYMID<br />
V17 AVS RF Blue<br />
Men’s Standard: stock #V17RFBU<br />
Excel XF Copper<br />
Men’s Standard: stock #WALCO<br />
Men’s Midsize: stock #WALCOM<br />
Men’s Jumbo: stock #WALCOJ<br />
Excel XF Black<br />
Men’s Standard: stock #WALBL<br />
Men’s Midsize: stock #WALBLM<br />
Excel XF Mahogany<br />
Men’s Standard: stock #WALMG<br />
Excel Harmony Black/Grey<br />
Men’s Standard: stock #WALHBGY<br />
Excel Harmony Black/Mahogany<br />
Men’s Standard: stock #WALHBM<br />
Classic RF Black<br />
Men’s Standard: stock #WRFBL<br />
Men’s Midsize: stock #WRMIDBL<br />
Men’s Jumbo: stock #WRFBLO<br />
Lady’s: stock #LWINBL<br />
Classic RF Tan<br />
Men’s Standard: stock #WRFTN<br />
Winn Grips<br />
Standard: 50g Midsize: 52g<br />
50 grams<br />
50 grams<br />
Standard: 50g Midsize: 52g<br />
50 grams<br />
Standard: 42g Midsize: 43g Jumbo: 47g<br />
Standard: 42g Midsize: 43g<br />
50 grams<br />
50 grams<br />
50 grams<br />
Standard: 42g Midsize: 43g Jumbo: 47g Lady’s: 39g<br />
42 grams
ob72 1/26/05 12:42 PM Page 65<br />
Brown Chamois<br />
Men’s Standard: stock #MCH<br />
Men’s Jumbo: stock #JCH<br />
Black Chamois<br />
Men’s Standard: stock #MCHBL<br />
Men’s Jumbo: stock #JCHBL<br />
Lady’s Black: stock #LCHBL<br />
Chamois II<br />
Men’s Standard: stock #MCH2<br />
Chamois II Black<br />
Men’s standard: stock #MCH2BL<br />
Chamois Wrap<br />
Men’s Standard: stock #ACHW<br />
Nexus Tour<br />
Men’s Standard: stock #NEXTD<br />
Men’s Midsize: stock #NEXMID<br />
Avon Grips<br />
Taci Mac Grips<br />
Perforated Wrap<br />
Men’s Standard: stock #MBK105P<br />
Men’s Midsize: stock #MBK107P<br />
Lady’s: stock #MBK102<br />
Black Knurled<br />
Men’s Standard: stock #MBK101<br />
Arthritic<br />
Men’s Jumbo: stock #ST271<br />
Standard: 51g Jumbo: 64g<br />
Standard: 51g Jumbo: 64g Lady’s: 42g<br />
53 grams<br />
53 grams<br />
53 grams<br />
Standard: 53g Midsize: 61g<br />
Standard: 51g Midsize:58g Lady’s: 48g<br />
53 grams<br />
70 grams<br />
[ 65 ]
ob72 1/26/05 12:42 PM Page 66<br />
[ 66 ]<br />
Winn Putter Grips<br />
Winn USA<br />
stock #WINPTUSA<br />
Winn V17 Criss Cross<br />
stock #V17PTCC<br />
Winn V17 Midsize<br />
stock #V17PTMID<br />
Winn V17 Jumbo<br />
stock #V17PTJ<br />
Winn Black Pistol<br />
Standard Size stock #WINPTBL<br />
Jumbo stock #WPTOSBL<br />
Winn Copper Pistol<br />
stock #WINPTCO<br />
Winn Medalist Blue<br />
stock #WINPTMBU<br />
Winn AVS Medalist Red/Silver<br />
stock #WALPT<strong>RD</strong><br />
Winn AVS Medalist Navy/Silver<br />
stock #WALPTBU<br />
Winn AVS Medalist Midsize<br />
stock #WALPTMID<br />
Winn V17 AVS Black/Gold<br />
stock #WPTAVSBL<br />
Winn Excel AVS Gold<br />
stock #WPTAVSGO<br />
Winn V17 AVS Y2K<br />
stock #WPTY2K<br />
Lamkin Putter Grips<br />
Lamkin Perma Wrap<br />
stock #320PT<br />
Lamkin Cross Line<br />
stock #CRSLPT<br />
Lamkin Jumbo<br />
stock #LAMJ<br />
Lamkin Deep Etched<br />
stock #LEPT<br />
59 grams<br />
60 grams<br />
77 grams<br />
81 grams<br />
59 grams<br />
88 grams<br />
61 grams<br />
59 grams<br />
61 grams<br />
61 grams<br />
78 grams<br />
63 grams<br />
63 grams<br />
55 grams<br />
70 grams<br />
60 grams<br />
116 grams<br />
80 grams
ob72 1/26/05 12:42 PM Page 67<br />
Golf Pride Putter Grips<br />
Dual Durometer<br />
stock #DDMPT<br />
Decade Putter Blue<br />
stock #DCPTBU<br />
Decade Putter Red<br />
stock #DCPT<strong>RD</strong><br />
Full Cord Putter<br />
stock #TWPFC<br />
Tour Velvet Putter<br />
stock #VTMPT<br />
<strong>Pro</strong> Only<br />
stock #PO58<br />
Players Sofftie<br />
stock #PLSOFPT<br />
Jumbo Crown<br />
stock #JCP58<br />
Whisper Black<br />
stock #WSPPT<br />
Whisper Saddle<br />
stock #WSPSDPT<br />
Whisper Tour Shape<br />
stock #WSPTSPT<br />
Belly Putter Grips<br />
Winn 21”<br />
stock #WINLONG<br />
Winn Two Piece<br />
stock #W2PT<br />
Winn Thin Two Piece<br />
stock #SKIN2WIN<br />
Golf Pride Whisper 2 pc.<br />
stock #WSP2PT<br />
62 grams<br />
72 grams<br />
72 grams<br />
64 grams<br />
65 grams<br />
52 grams<br />
64 grams<br />
140 grams<br />
69 grams<br />
69 grams<br />
66 grams<br />
155 grams<br />
132 grams<br />
107 grams<br />
117 grams<br />
[ 67 ]
ob72 1/26/05 12:42 PM Page 68<br />
[ 68 ]<br />
Black<br />
leather<br />
Grey<br />
knit<br />
Green<br />
knit<br />
Zipper Headcover<br />
for oversize<br />
drivers (up to<br />
600cc)<br />
stock #<br />
530HC<br />
Black<br />
USA fur<br />
cover for<br />
use up to<br />
460cc<br />
stock #<br />
BFCUSA<br />
Red<br />
knit<br />
Black<br />
knit<br />
Blue<br />
knit<br />
Black fur<br />
cover for<br />
use up to<br />
460cc<br />
stock #<br />
BFCBL<br />
Leather Avail. in:<br />
#1, #3 and #5 individual pcs only<br />
Knit Covers avail. in:<br />
#1, #3, #5 and #X individual pcs or<br />
sets #1, #3 and #5<br />
Putter Cover<br />
stock #HCPUT<br />
for use with:<br />
3 Ball Blade True Balance<br />
Long Putter #1<br />
1 Ball 3 Ball Double Hump<br />
most mallet styles<br />
Red/Black<br />
fur cover<br />
for use up<br />
to 460cc<br />
stock #<br />
BFCRB<br />
stock #<br />
LHC<br />
HC<br />
HCSET
ob72 1/26/05 1:24 PM Page 69<br />
The Simple Guide to Building<br />
Great Golf Clubs<br />
Club Assembly Manual<br />
stock #MANUAL<br />
Perfect for the beginning club<br />
builder. This 28p b/w manual guides<br />
the reader step-by-step through the<br />
assembly process. Also included is<br />
information about shaft prepping,<br />
countersinking and custom fitting.<br />
24 Hour Shafting Epoxy<br />
Pint stock #BSE1<br />
1/2 Pint stock #BSE5<br />
2 part 50/50 mix. Work time about 60 minutes.<br />
Cures overnight. This is the preferred epoxy of<br />
our assembly department and has the highest<br />
dependability rating of any shafting epoxy.<br />
1/2 Pint 20 Minute Shafting Epoxy<br />
stock #E20<br />
2 part 50/50 mix. Work time about 5<br />
minutes. Cures in about 20 minutes<br />
(slightly slower cure time in cold or<br />
humid conditions). Better than Conap!<br />
1/2 Pint 10 Minute Shafting Epoxy<br />
stock #E10<br />
2 part 50/50 mix. Work time about 2<br />
minutes. Cures in about 10 minutes<br />
(slightly slower cure time in cold or<br />
humid conditions). Better than Conap!<br />
20 Minute Syringe Shafting Epoxy<br />
stock #QE20<br />
2 part 50/50 mix. Work time about 5<br />
minutes. Cures in about 20 minutes<br />
(slightly slower cure time in cold or<br />
humid conditions). Better than Conap!<br />
10 Minute Syringe Shafting Epoxy<br />
stock #QE10<br />
2 part 50/50 mix. Work time about 2<br />
minutes. Cures in about 10 minutes<br />
(slightly slower cure time in cold or<br />
humid conditions). Better than Conap!<br />
24 Hour Shafting Epoxy Pack<br />
stock #EPACK<br />
Enough to do 1-5 clubs per pack.<br />
Grip Kit<br />
stock #GRIPKIT<br />
Includes the supplies necessary for<br />
approximately 14 clubs: 4oz solvent<br />
bottle, 2” x 4 yard grip tape, clamp<br />
and a how-to CD ROM video.<br />
2” Grip Tape<br />
2” x 36 yard stock #GT2<br />
2” x 4 yard stock #SGT2<br />
The preferred tape of our assembly<br />
department.<br />
3/4” Grip Tape<br />
3/4” x 36 yard stock #GT34<br />
3/4” x 10 yard stock #SGT34<br />
Grip Clamp<br />
stock # CLAMP<br />
1 Gallon Grip Solvent<br />
stock #GSG<br />
The preferred solvent of our assembly<br />
department.<br />
1 Quart Grip Solvent<br />
stock #QSOL<br />
The preferred solvent of our assembly<br />
department.<br />
8oz/4oz Grip Solvent<br />
8oz stock #GS8OZ<br />
4oz stock #GS4OZ<br />
[ 69 ]
ob72 1/26/05 1:13 PM Page 70<br />
[ 70 ]<br />
Hosel Brush<br />
stock #BRUSH<br />
Perfect for removing unwanted<br />
debris from the inside of a hosel.<br />
Works with irons and woods.<br />
Easy Out<br />
Iron Easy Out stock #EASYI<br />
Wood Easy Out stock #EASYW<br />
Great for removing steel shaft fragments<br />
that have broken off inside of<br />
a hosel.<br />
Countersink Bit<br />
stock #CS<br />
To cone the top of a hosel to prepare<br />
the head for use with graphite shafts.<br />
Drill Bits<br />
6” 1/8” Bit stock #BIT18<br />
Iron “T” Bit stock #BITT<br />
11/32” Bit stock #BIT1132<br />
5/16” Bit stock #BIT516<br />
Graphite Shaft Extenders<br />
Ultralite Version stock #GSEUL<br />
Standard Version stock #GSE<br />
Steel Shaft Extenders<br />
.580 Butt stock #SSE58<br />
.600 Butt stock #SSE60<br />
Bore Thru Plug<br />
for steel shafts stock #PLUGST<br />
for graphite shafts stock #PLUGGR<br />
To plug the bottom of a shaft that<br />
penetrates the sole plate on bore-thru<br />
type club heads.<br />
Face Tape for <strong>Irons</strong>/Woods<br />
iron stock #FACETI<br />
wood stock #FACETW<br />
5 count strip.<br />
Scorpion Spikes<br />
Large Thread stock #SCORPL<br />
Small Thread stock #SCORPS<br />
QLok Thread stock #SCORPQ<br />
TriLok Thread stock #SCORPT<br />
Natural Finish Tees<br />
3.25” 25 pack stock #T325<br />
3.25” 100 pack stock #T3100<br />
2.75” 25 pack stock #TLONG25<br />
2.75” 100 pack stock #TLONG100<br />
Lead Tape<br />
1/2” x 36 yard roll stock #LR<br />
1/2” x 100” roll stock #LS<br />
Lead Powder<br />
1 pound stock #LP<br />
For use with shaft corks for fine tuning<br />
swing weights.<br />
Shaft Corks<br />
pkg of 25 for irons stock #CI<br />
pkg of 25 for woods stock #CO<br />
Blue Away<br />
stock # BLAW<br />
Removes burn marks from hosels<br />
that have been scarred due to heating<br />
during shaft removal.<br />
Naval Jelly<br />
stock #NAVJ<br />
Removes corrosion and surface rust<br />
from metallic surfaces.<br />
4” Cut Off Wheel and Mandrel<br />
4” Wheel stock #COW4<br />
Mandrel stock #MANDREL<br />
For use in a standard drill, this assembly<br />
makes cutting shafts affordably easy.<br />
Wheel and mandrel sold separately.<br />
6” Cut Off Wheel<br />
stock #COW6<br />
Great for cutting shafts for use with a<br />
1/2” bench grinder.<br />
48” Assembly Ruler<br />
stock #RULER<br />
A must for any club builder.<br />
Trainer Grip<br />
Men’s stock #MTRAINER<br />
Lady/Junior stock #LJTRAINER<br />
Teaches proper hand positions.
ob72 1/26/05 12:42 PM Page 71<br />
Ferrules for woods/irons<br />
9/16” silver/gray/black<br />
iron stock # FBSGI<br />
wood stock # FBSGW<br />
9/16” gold/black<br />
iron stock # FMBGI<br />
wood stock # FMBGW<br />
insert ring<br />
iron stock # HCIRI<br />
wood stock # HCIR2<br />
Insert Ring Insert Ferrule<br />
Wood Insert stock#hcir2<br />
Wood Insert Ferrule stock#insfw<br />
3 gram screw<br />
stock#screw3<br />
Note that most of our <strong>Trident</strong> heads require our patented hosel collar insert system. The<br />
use of this insert eliminates the need to countersink the head for use with a graphite shaft.<br />
However, only heads that have been specially counterbored to accept the insert can be used<br />
with the insert. To assemble with the insert, follow these instructions: 1) Spread a thin<br />
coat of epoxy throughout the inner diameter of the hosel (including the region where the<br />
insert will fit. 2) Slide the insert into position. 3) Put a thin coat of epoxy on the tip of the<br />
shaft. 4) Insert the shaft while rotating to ensure consistent epoxy coverage.<br />
Iron Insert stock#hciri<br />
US Patent 5,452,890<br />
Iron Insert Ferrule stock#insfi .350 Insert stock#hcir3<br />
Weight screws for use with the 410/360 <strong>Trident</strong> SS Ti<br />
5 gram screw<br />
stock#screw5<br />
9 gram screw<br />
stock#screw9<br />
11 gram screw<br />
stock#screw11<br />
Weight screws for with the <strong>Trident</strong> TS-10 410/450 and TS-10 Fairway woods<br />
TS-10 Ti 2g<br />
stock#tscrew2<br />
TS-10 Ti 4g<br />
stock#tscrew4<br />
9/16”clear/black<br />
iron stock # FCBI<br />
wood stock # FCBW<br />
3/8” gold/black<br />
iron stock # FMBGIS<br />
wood stock # FMBGWS<br />
insert ferrule<br />
iron stock # INSFI<br />
wood stock # INSFW<br />
TS-10 Ti 6g<br />
stock#tscrew6<br />
.350 wood insert ring<br />
wood stock #<br />
HCIR3<br />
9/16” copper/black<br />
iron stock # FCOBI<br />
wood stock # FCOBW<br />
TS-10 Ti 8g<br />
stock#tscrew8<br />
9/16” black<br />
iron stock # FMBI<br />
wood stock # FMB<br />
hosel ring<br />
iron stock # LHRI<br />
wood stock # LHRW<br />
TS-10 Ti 10g<br />
stock#tscrew10<br />
3/8” copper/black<br />
iron stock # FCOBIS<br />
wood stock # FCOBWS<br />
3/8” black<br />
iron stock # FMBIS<br />
wood stock # FMBS<br />
.350 hosel ring<br />
wood stock #<br />
LHRW350<br />
17 gram screw<br />
stock#screw17<br />
.350 wood ferrule<br />
wood stock #<br />
FMBS350<br />
22 gram screw<br />
stock#screw22<br />
9/16” white/black<br />
iron stock # FWBI<br />
wood stock # FWBW<br />
9/16” red/black<br />
iron stock # FRBRI<br />
wood stock # FRBRW<br />
Inserts and Special ferrules<br />
Specialty Weight Screws<br />
.350 converter<br />
stock #<br />
350CON<br />
Weight screws for with the <strong>Trident</strong> <strong>RD</strong> Hybrid<br />
Hybrid 14g<br />
stock#hysc14<br />
Hybrid 18g<br />
stock#hysc18<br />
Hybrid 21g<br />
stock#hysc21<br />
Hybrid 24g<br />
stock#hysc24<br />
[ 71 ]
ob72 1/26/05 12:43 PM Page 72<br />
Precision Golf Tools<br />
6” Digital Caliper<br />
stock #DIGCAL<br />
Accurate to .001”! Switch from mm/in with the push of a button. Comes with a<br />
case and extra battery. Measure ID, OD, tip/butt, etc. Hundreds of golf and nongolf<br />
measuring applications with digital readout!<br />
Drill Bit Set (29pc set)<br />
stock #BITSET<br />
Full index from 1/64” to 1/2”. Heat<br />
treated with a black oxide finish. Self<br />
centering split point design prevents<br />
skating. Includes metal index.<br />
3” Multi Purpose Bench Grinder<br />
stock #GRIND3<br />
Great for cutting and prepping steel or graphite<br />
shafts! Comes with a “Flex Shaft” with a mounted<br />
stone bit capable of 10K RPM for fine sanding. Ideal<br />
for small shop operations. Extra shipping charge applies.<br />
4-Speed Rotary Tool Kit<br />
stock #4ROTKIT<br />
A terrific addition to any club building workshop! Adjustable 4 speed (6500, 10700, 14000 and<br />
22000 RPM). Includes a 30pc accessory kit and carrying case. Great for cutting, grinding, deburring,<br />
sharpening and polishing.<br />
stone bit for fine<br />
sanding or prepping!<br />
The best, easiest to use<br />
caliper we’ve ever tested.<br />
Digital readout for inches<br />
and mm’s!!<br />
no more burn marks!<br />
Heat Gun<br />
stock #HEATGUN<br />
1500 Watt. Two heat settings (630 o , 1000 o F). A<br />
perfect way to heat a hosel for shaft removal.<br />
3” Cut Off Wheels (10 Pack)<br />
stock #COW3<br />
Cut Off Wheels for use with our 3” Multi Purpose<br />
Bench Grinder.<br />
<strong>Pro</strong> <strong>Swing</strong>, Inc 330 Grandview Ave Wadsworth, OH 44281 1.800.451.1995<br />
www.proswing.com